Skip to contentSkip to conversation

KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop

PATCH Applied Sean Christopherson 2 participants 6 messages Jan 25, 2025 – Feb 15, 2025

Subsystems (3)
lore
Share & tools
lore

Sean Christopherson

author maintainer
#0 lore raw

PATCH 1/1 KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop

Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6.

When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit.

For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.

But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop.

Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value.

The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1).

    L1's view:
    ==========
    <L1 disables DR interception>
           CPU 0/KVM-7289    [023] d....  2925.640961: kvm_entry: vcpu 0
 A:  L1 Writes DR6
           CPU 0/KVM-7289    [023] d....  2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1

B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec

D: L1 reads DR6, arch.dr6 = 0

           CPU 0/KVM-7289    [023] d....  2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0

           CPU 0/KVM-7289    [023] d....  2925.640976: kvm_entry: vcpu 0
    L2 reads DR6, L1 disables DR interception
           CPU 0/KVM-7289    [023] d....  2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216
           CPU 0/KVM-7289    [023] d....  2925.640983: kvm_entry: vcpu 0

           CPU 0/KVM-7289    [023] d....  2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0

    L2 detects failure
           CPU 0/KVM-7289    [023] d....  2925.640987: kvm_exit: vcpu 0 reason HLT
    L1 reads DR6 (confirms failure)
           CPU 0/KVM-7289    [023] d....  2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0

    L0's view:
    ==========
    L2 reads DR6, arch.dr6 = 0
          CPU 23/KVM-5046    [001] d....  3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
          CPU 23/KVM-5046    [001] .....  3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216

    L2 => L1 nested VM-Exit
          CPU 23/KVM-5046    [001] .....  3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216

          CPU 23/KVM-5046    [001] d....  3410.005610: kvm_entry: vcpu 23
          CPU 23/KVM-5046    [001] d....  3410.005611: kvm_exit: vcpu 23 reason VMREAD
          CPU 23/KVM-5046    [001] d....  3410.005611: kvm_entry: vcpu 23
          CPU 23/KVM-5046    [001] d....  3410.005612: kvm_exit: vcpu 23 reason VMREAD
          CPU 23/KVM-5046    [001] d....  3410.005612: kvm_entry: vcpu 23

    L1 writes DR7, L0 disables DR interception
          CPU 23/KVM-5046    [001] d....  3410.005612: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000007
          CPU 23/KVM-5046    [001] d....  3410.005613: kvm_entry: vcpu 23

    L0 writes DR6 = 0 (arch.dr6)
          CPU 23/KVM-5046    [001] d....  3410.005613: <hack>: Set DRs, DR6 = 0xffff0ff0

A: <L1 writes DR6 = 1, no interception, arch.dr6 is still '0'>

 B:       CPU 23/KVM-5046    [001] d....  3410.005614: kvm_exit: vcpu 23 reason PREEMPTION_TIMER
          CPU 23/KVM-5046    [001] d....  3410.005614: kvm_entry: vcpu 23

C: L0 writes DR6 = 0 (arch.dr6)

          CPU 23/KVM-5046    [001] d....  3410.005614: <hack>: Set DRs, DR6 = 0xffff0ff0

    L1 => L2 nested VM-Enter
          CPU 23/KVM-5046    [001] d....  3410.005616: kvm_exit: vcpu 23 reason VMRESUME

    L0 reads DR6, arch.dr6 = 0
Fixes 375e28ffc0cf ("KVM: X86: Set host DR6 only on VMX and for KVM_DEBUGREG_WONT_EXIT")
Fixes d67668e9dd76 ("KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6")
Cc Jim Mattson <[email protected]>
---
 arch/x86/include/asm/kvm-x86-ops.h |  1 +
 arch/x86/include/asm/kvm_host.h    |  1 +
 arch/x86/kvm/svm/svm.c             | 13 ++++++-------
 arch/x86/kvm/vmx/main.c            |  1 +
 arch/x86/kvm/vmx/vmx.c             | 10 ++++++----
 arch/x86/kvm/vmx/x86_ops.h         |  1 +
 arch/x86/kvm/x86.c                 |  3 +++
 7 files changed, 19 insertions(+), 11 deletions(-)
arch/x86/include/asm/kvm-x86-ops.h +1 -0
index 7b4536ff3834..5459bc48cfd1 100644
@@ -48,6 +48,7 @@ KVM_X86_OP(set_idt)
 KVM_X86_OP(get_gdt)
 KVM_X86_OP(set_gdt)
 KVM_X86_OP(sync_dirty_debug_regs)
+KVM_X86_OP(set_dr6)
 KVM_X86_OP(set_dr7)
 KVM_X86_OP(cache_reg)
 KVM_X86_OP(get_rflags)
arch/x86/include/asm/kvm_host.h +1 -0
index 5193c3dfbce1..21d247176858 100644
@@ -1685,6 +1685,7 @@ struct kvm_x86_ops {
 	void (*get_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
 	void (*set_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
 	void (*sync_dirty_debug_regs)(struct kvm_vcpu *vcpu);
+	void (*set_dr6)(struct kvm_vcpu *vcpu, unsigned long value);
 	void (*set_dr7)(struct kvm_vcpu *vcpu, unsigned long value);
 	void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg);
 	unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
arch/x86/kvm/svm/svm.c +6 -7
index 7640a84e554a..a713c803a3a3 100644
@@ -1991,11 +1991,11 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *sd)
 	svm->asid = sd->next_asid++;
 }
 
-static void svm_set_dr6(struct vcpu_svm *svm, unsigned long value)
+static void svm_set_dr6(struct kvm_vcpu *vcpu, unsigned long value)
 {
-	struct vmcb *vmcb = svm->vmcb;
+	struct vmcb *vmcb = to_svm(vcpu)->vmcb;
 
-	if (svm->vcpu.arch.guest_state_protected)
+	if (vcpu->arch.guest_state_protected)
 		return;
 
 	if (unlikely(value != vmcb->save.dr6)) {
@@ -4247,10 +4247,8 @@ static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu,
 	 * Run with all-zero DR6 unless needed, so that we can get the exact cause
 	 * of a #DB.
 	 */
-	if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT))
-		svm_set_dr6(svm, vcpu->arch.dr6);
-	else
-		svm_set_dr6(svm, DR6_ACTIVE_LOW);
+	if (likely(!(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)))
+		svm_set_dr6(vcpu, DR6_ACTIVE_LOW);
 
 	clgi();
 	kvm_load_guest_xsave_state(vcpu);
@@ -5043,6 +5041,7 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
 	.set_idt = svm_set_idt,
 	.get_gdt = svm_get_gdt,
 	.set_gdt = svm_set_gdt,
+	.set_dr6 = svm_set_dr6,
 	.set_dr7 = svm_set_dr7,
 	.sync_dirty_debug_regs = svm_sync_dirty_debug_regs,
 	.cache_reg = svm_cache_reg,
arch/x86/kvm/vmx/main.c +1 -0
index 2427f918e763..43ee9ed11291 100644
@@ -61,6 +61,7 @@ struct kvm_x86_ops vt_x86_ops __initdata = {
 	.set_idt = vmx_set_idt,
 	.get_gdt = vmx_get_gdt,
 	.set_gdt = vmx_set_gdt,
+	.set_dr6 = vmx_set_dr6,
 	.set_dr7 = vmx_set_dr7,
 	.sync_dirty_debug_regs = vmx_sync_dirty_debug_regs,
 	.cache_reg = vmx_cache_reg,
arch/x86/kvm/vmx/vmx.c +6 -4
index f72835e85b6d..6c56d5235f0f 100644
@@ -5648,6 +5648,12 @@ void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu)
 	set_debugreg(DR6_RESERVED, 6);
 }
 
+void vmx_set_dr6(struct kvm_vcpu *vcpu, unsigned long val)
+{
+	lockdep_assert_irqs_disabled();
+	set_debugreg(vcpu->arch.dr6, 6);
+}
+
 void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val)
 {
 	vmcs_writel(GUEST_DR7, val);
@@ -7417,10 +7423,6 @@ fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu, bool force_immediate_exit)
 		vmx->loaded_vmcs->host_state.cr4 = cr4;
 	}
 
-	/* When KVM_DEBUGREG_WONT_EXIT, dr6 is accessible in guest. */
-	if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT))
-		set_debugreg(vcpu->arch.dr6, 6);
-
 	/* When single-stepping over STI and MOV SS, we must clear the
 	 * corresponding interruptibility bits in the guest state. Otherwise
 	 * vmentry fails as it then expects bit 14 (BS) in pending debug
arch/x86/kvm/vmx/x86_ops.h +1 -0
index ce3295a67c04..430773a5ef8e 100644
@@ -73,6 +73,7 @@ void vmx_get_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
 void vmx_set_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
 void vmx_get_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
 void vmx_set_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
+void vmx_set_dr6(struct kvm_vcpu *vcpu, unsigned long val);
 void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val);
 void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu);
 void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg);
arch/x86/kvm/x86.c +3 -0
index b2d9a16fd4d3..9d5d267b4e14 100644
@@ -10971,6 +10971,9 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		set_debugreg(vcpu->arch.eff_db[1], 1);
 		set_debugreg(vcpu->arch.eff_db[2], 2);
 		set_debugreg(vcpu->arch.eff_db[3], 3);
+		/* When KVM_DEBUGREG_WONT_EXIT, dr6 is accessible in guest. */
+		if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT))
+			kvm_x86_call(set_dr6)(vcpu, vcpu->arch.dr6);
 	} else if (unlikely(hw_breakpoint_active())) {
 		set_debugreg(0, 7);
 	}

base-commit: eb723766b1030a23c38adf2348b7c3d1409d11f0

Signature · 1 line
2.48.1.262.g85cc9f2d1e-goog
author maintainer
#2 lore raw
Quoted 1 line · Paolo Bonzini

Queued, thanks.

Drat, I was too slow today. I applied and pushed this to "kvm-x86 fixes" and linux-next (as of yesterday), along with a few other things, I just haven't sent out the "thanks" yet (got sidetracked).

If you want to grab those, here's a semi-impromptu pull request. Otherwise I'll just drop this particular commit.

--

The following changes since commit a64dcfb451e254085a7daee5fe51bf22959d52d3:

Linux 6.14-rc2 (2025-02-09 12:45:03 -0800)

are available in the Git repository at:

https://github.com/kvm-x86/linux.git tags/kvm-x86-fixes-6.14-rcN

for you to fetch changes up to c2fee09fc167c74a64adb08656cb993ea475197e:

KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop (2025-02-12 08:59:38 -0800)

----------------------------------------------------------------
KVM fixes for 6.14 part 1

- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference.

- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1.

- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath.

----------------------------------------------------------------
Sean Christopherson (6):
KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC isn't in-kernel
KVM: selftests: Mark test_hv_cpuid_e2big() static in Hyper-V CPUID test
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop

 arch/x86/include/asm/kvm-x86-ops.h             |  1 +
 arch/x86/include/asm/kvm_host.h                |  1 +
 arch/x86/kvm/hyperv.c                          |  6 +++++-
 arch/x86/kvm/mmu/mmu.c                         |  2 +-
 arch/x86/kvm/svm/nested.c                      | 10 +++++-----
 arch/x86/kvm/svm/svm.c                         | 13 ++++++-------
 arch/x86/kvm/vmx/main.c                        |  1 +
 arch/x86/kvm/vmx/vmx.c                         | 10 ++++++----
 arch/x86/kvm/vmx/x86_ops.h                     |  1 +
 arch/x86/kvm/x86.c                             |  3 +++
 tools/testing/selftests/kvm/x86/hyperv_cpuid.c | 47 ++++++++++++++++++++++++++++++++---------------
 11 files changed, 62 insertions(+), 33 deletions(-)
maintainer
#3 lore raw
Quoted 9 lines · Sean Christopherson
Quoted 1 line · Paolo Bonzini

Queued, thanks.

Drat, I was too slow today. I applied and pushed this to "kvm-x86 fixes" and linux-next (as of yesterday), along with a few other things, I just haven't sent out the "thanks" yet (got sidetracked).

If you want to grab those, here's a semi-impromptu pull request. Otherwise I'll just drop this particular commit.

I had "KVM: nSVM: Enter guest mode before initializing nested NPT MMU" on my list, but not the others.

I'll just pull these, thanks.

Paolo

Quoted 48 lines

--

The following changes since commit a64dcfb451e254085a7daee5fe51bf22959d52d3:

   Linux 6.14-rc2 (2025-02-09 12:45:03 -0800)

are available in the Git repository at:

   https://github.com/kvm-x86/linux.git tags/kvm-x86-fixes-6.14-rcN

for you to fetch changes up to c2fee09fc167c74a64adb08656cb993ea475197e:

KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop (2025-02-12 08:59:38 -0800)

----------------------------------------------------------------
KVM fixes for 6.14 part 1

- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference.

- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1.

- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath.

----------------------------------------------------------------
Sean Christopherson (6):
KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC isn't in-kernel
KVM: selftests: Mark test_hv_cpuid_e2big() static in Hyper-V CPUID test
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop

  arch/x86/include/asm/kvm-x86-ops.h             |  1 +
  arch/x86/include/asm/kvm_host.h                |  1 +
  arch/x86/kvm/hyperv.c                          |  6 +++++-
  arch/x86/kvm/mmu/mmu.c                         |  2 +-
  arch/x86/kvm/svm/nested.c                      | 10 +++++-----
  arch/x86/kvm/svm/svm.c                         | 13 ++++++-------
  arch/x86/kvm/vmx/main.c                        |  1 +
  arch/x86/kvm/vmx/vmx.c                         | 10 ++++++----
  arch/x86/kvm/vmx/x86_ops.h                     |  1 +
  arch/x86/kvm/x86.c                             |  3 +++
  tools/testing/selftests/kvm/x86/hyperv_cpuid.c | 47 ++++++++++++++++++++++++++++++++---------------
  11 files changed, 62 insertions(+), 33 deletions(-)
author maintainer
#4 lore raw
Quoted 8 lines · Paolo Bonzini
Quoted 7 lines · Sean Christopherson
Quoted 1 line · Paolo Bonzini

Queued, thanks.

Drat, I was too slow today. I applied and pushed this to "kvm-x86 fixes" and linux-next (as of yesterday), along with a few other things, I just haven't sent out the "thanks" yet (got sidetracked).

Quoted 7 lines
Quoted 2 lines

If you want to grab those, here's a semi-impromptu pull request. Otherwise I'll just drop this particular commit.

I had "KVM: nSVM: Enter guest mode before initializing nested NPT MMU" on my list, but not the others.

I'll just pull these, thanks.

Heh, while you're here, here's combined pull request for the selftests changes that missed 6.14 due to the pmu_counters_test snafumi[1][2]?

I'm a-ok if you want to hold off until 6.15. I have them sitting in a separate branch (selftests_6.14), and don't anticipate conflicts, so it's no trouble to carry them until the next merge window.

[1] https://lore.kernel.org/all/[email protected]
[2] https://lore.kernel.org/all/[email protected]

---
The following changes since commit 10b2c8a67c4b8ec15f9d07d177f63b563418e948:

Merge tag 'kvm-x86-fixes-6.13-rcN' of https://github.com/kvm-x86/linux into HEAD (2024-12-22 12:59:33 -0500)

are available in the Git repository at:

https://github.com/kvm-x86/linux.git tags/kvm-x86-selftests-6.14-2

for you to fetch changes up to 54108e73344480c3e5f3799129970009f52c59f4:

KVM: selftests: Print out the actual Top-Down Slots count on failure (2025-02-12 08:34:56 -0800)

----------------------------------------------------------------
KVM selftests changes for 6.14:

- Misc cleanups and prep work.

- Annotate _no_printf() with "printf" so that pr_debug() statements are checked by the compiler for default builds (and pr_info() when QUIET).

- Attempt to whack the last LLC references/misses mole in the Intel PMU counters test by adding a data load and doing CLFLUSH{OPT} on the data instead of the code being executed. The theory is that modern Intel CPUs have learned new code prefetching tricks that bypass the PMU counters.

- Fix a flaw in the Intel PMU counters test where it asserts that an event is counting correctly without actually knowing what the event counts on the underlying hardware.

----------------------------------------------------------------
Chen Ni (1):
KVM: selftests: Remove unneeded semicolon

Colton Lewis (2):
KVM: selftests: Fix typos in x86's PMU counter test's macro variable use
KVM: selftests: Add defines for AMD PMU CPUID features and properties

Isaku Yamahata (1):
KVM: selftests: Add printf attribute to _no_printf()

Sean Christopherson (7):
KVM: selftests: Use data load to trigger LLC references/misses in Intel PMU
KVM: selftests: Add helpers for locally (un)blocking IRQs on x86
KVM: selftests: Make Intel arch events globally available in PMU counters test
KVM: selftests: Only validate counts for hardware-supported arch events
KVM: selftests: Remove dead code in Intel PMU counters test
KVM: selftests: Drop the "feature event" param from guest test helpers
KVM: selftests: Print out the actual Top-Down Slots count on failure

 tools/testing/selftests/kvm/access_tracking_perf_test.c |   2 +-
 tools/testing/selftests/kvm/include/test_util.h         |   2 +-
 tools/testing/selftests/kvm/include/x86/processor.h     |  47 +++++++++++++++++++++++++++++++++
 tools/testing/selftests/kvm/x86/hyperv_ipi.c            |   6 +++--
 tools/testing/selftests/kvm/x86/pmu_counters_test.c     | 158 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------------------------
 tools/testing/selftests/kvm/x86/svm_int_ctl_test.c      |   5 +---
 tools/testing/selftests/kvm/x86/ucna_injection_test.c   |   2 +-
 tools/testing/selftests/kvm/x86/xapic_ipi_test.c        |   3 ++-
 tools/testing/selftests/kvm/x86/xapic_state_test.c      |   4 +--
 tools/testing/selftests/kvm/x86/xen_shinfo_test.c       |   5 +---
 10 files changed, 151 insertions(+), 83 deletions(-)
author maintainer Applied
#5 lore raw
In reply to Sean Christopherson
Quoted 11 lines · Sean Christopherson

Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6.

When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit.

[...]

Applied to kvm-x86 fixes, thanks!

[1/1] KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop

      https://github.com/kvm-x86/linux/commit/c2fee09fc167

--
https://github.com/kvm-x86/linux/tree/next