gpio: 74x164: Refactor and clean up the driver
v2 cover gpio: 74x164: Refactor and clean up the driver
Seems like I have had a cleanup series for 74x164, but forgot to send it last year, here it is.
Changelog v2:
- remove ->remove() leftover (Bart)
- collected tags (Geert, Gustavo)
Andy Shevchenko (7):
gpio: 74x164: Remove unneeded dependency to OF_GPIO
gpio: 74x164: Simplify code with cleanup helpers
gpio: 74x164: Annotate buffer with __counted_by()
gpio: 74x164: Make use of the macros from bits.h
gpio: 74x164: Fully convert to use managed resources
gpio: 74x164: Switch to use dev_err_probe()
gpio: 74x164: Utilise temporary variable for struct device
drivers/gpio/Kconfig | 1 - drivers/gpio/gpio-74x164.c | 70 +++++++++++++++++++------------------- 2 files changed, 35 insertions(+), 36 deletions(-)
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
PATCH v2 1/7 gpio: 74x164: Remove unneeded dependency to OF_GPIO
Remove unneeded dependency to OF_GPIO which driver does not use.
--- drivers/gpio/Kconfig | 1 - 1 file changed, 1 deletion(-)
drivers/gpio/Kconfig +0 -1
@@ -1766,7 +1766,6 @@ menu "SPI GPIO expanders" config GPIO_74X164 tristate "74x164 serial-in/parallel-out 8-bits shift register" - depends on OF_GPIO help Driver for 74x164 compatible serial-in/parallel-out 8-outputs shift registers. This driver can be used to provide access
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
PATCH v2 2/7 gpio: 74x164: Simplify code with cleanup helpers
In reply to Andy ShevchenkoUse macros defined in linux/cleanup.h to automate resource lifetime control in the driver.
--- drivers/gpio/gpio-74x164.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)
drivers/gpio/gpio-74x164.c +7 -9
@@ -7,6 +7,7 @@*/ #include <linux/bitops.h> +#include <linux/cleanup.h> #include <linux/gpio/consumer.h> #include <linux/gpio/driver.h> #include <linux/module.h>
@@ -43,13 +44,10 @@ static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset)struct gen_74x164_chip *chip =gpiochip_get_data (gc);u8 bank = chip->registers -1 - offset /8 ;u8 pin = offset %8 ; -int ret; -mutex_lock (&chip->lock); - ret = (chip->buffer[bank] >> pin) &0x1 ; -mutex_unlock (&chip->lock); +guard (mutex)(&chip->lock); -return ret; +return (chip->buffer[bank] >> pin) &0x1 ; } static void gen_74x164_set_value(struct gpio_chip *gc,
@@ -59,14 +57,14 @@ static void gen_74x164_set_value(struct gpio_chip *gc,u8 bank = chip->registers -1 - offset /8 ;u8 pin = offset %8 ; -mutex_lock (&chip->lock); +guard (mutex)(&chip->lock); +if (val) chip->buffer[bank] |= (1 << pin);else chip->buffer[bank] &= ~(1 << pin);__gen_74x164_write_config (chip); -mutex_unlock (&chip->lock); } static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask,
@@ -78,7 +76,8 @@ static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask,size_t bank;unsigned long bitmask; -mutex_lock (&chip->lock); +guard (mutex)(&chip->lock); +for_each_set_clump8 (offset, bankmask, mask, chip->registers *8 ) { bank = chip->registers -1 - offset /8 ; bitmask =bitmap_get_value8 (bits, offset) & bankmask;
@@ -87,7 +86,6 @@ static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask, chip->buffer[bank] |= bitmask; }__gen_74x164_write_config (chip); -mutex_unlock (&chip->lock); } static int gen_74x164_direction_output(struct gpio_chip *gc,
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
PATCH v2 3/7 gpio: 74x164: Annotate buffer with __counted_by()
In reply to Andy ShevchenkoAdd the __counted_by() compiler attribute to the flexible array member volumes to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Use struct_size() instead of manually calculating the number of bytes to allocate the private structure with a buffer.
--- drivers/gpio/gpio-74x164.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/gpio/gpio-74x164.c +5 -5
@@ -30,7 +30,7 @@ struct gen_74x164_chip {* register at the end of the transfer. So, to have a logical * numbering, store the bytes in reverse order. */ -u8 buffer[]; + u8 buffer[] __counted_by(registers); };static int __gen_74x164_write_config (struct gen_74x164_chip *chip)
@@ -97,6 +97,7 @@ static int gen_74x164_direction_output(struct gpio_chip *gc,static int gen_74x164_probe (struct spi_device *spi) { +struct device *dev = &spi->dev;struct gen_74x164_chip *chip;u32 nregs;int ret;
@@ -116,10 +117,12 @@ static int gen_74x164_probe(struct spi_device *spi)return -EINVAL ; } - chip =devm_kzalloc (&spi->dev,sizeof (*chip) + nregs,GFP_KERNEL ); + chip =devm_kzalloc (dev,struct_size (chip, buffer, nregs),GFP_KERNEL );if (!chip)return -ENOMEM ; + chip->registers = nregs; + chip->gpiod_oe =devm_gpiod_get_optional (&spi->dev,"enable" ,GPIOD_OUT_LOW );if (IS_ERR (chip->gpiod_oe))
@@ -133,10 +136,7 @@ static int gen_74x164_probe(struct spi_device *spi) chip->gpio_chip.set = gen_74x164_set_value; chip->gpio_chip.set_multiple = gen_74x164_set_multiple; chip->gpio_chip.base =-1 ; - - chip->registers = nregs; chip->gpio_chip.ngpio =GEN_74X164_NUMBER_GPIOS * chip->registers; - chip->gpio_chip.can_sleep = true; chip->gpio_chip.parent = &spi->dev; chip->gpio_chip.owner =THIS_MODULE ;
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
PATCH v2 4/7 gpio: 74x164: Make use of the macros from bits.h
In reply to Andy ShevchenkoMake use of BIT() and GENMASK() where it makes sense.
--- drivers/gpio/gpio-74x164.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpio/gpio-74x164.c +3 -3
@@ -47,7 +47,7 @@ static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset)guard (mutex)(&chip->lock); -return (chip->buffer[bank] >> pin) &0x1 ; +return !!(chip->buffer[bank] &BIT (pin)); } static void gen_74x164_set_value(struct gpio_chip *gc,
@@ -60,9 +60,9 @@ static void gen_74x164_set_value(struct gpio_chip *gc,guard (mutex)(&chip->lock);if (val) - chip->buffer[bank] |= (1 << pin); + chip->buffer[bank] |=BIT (pin);else - chip->buffer[bank] &= ~(1 << pin); + chip->buffer[bank] &= ~BIT (pin);__gen_74x164_write_config (chip); }
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
PATCH v2 5/7 gpio: 74x164: Fully convert to use managed resources
In reply to Andy ShevchenkoConvert the driver probe stage to use managed resources.
--- drivers/gpio/gpio-74x164.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-)
drivers/gpio/gpio-74x164.c +16 -11
@@ -95,6 +95,19 @@ static int gen_74x164_direction_output(struct gpio_chip *gc,return 0 ; } +static void gen_74x164_deactivate (void *data) +{ +struct gen_74x164_chip *chip = data; + +gpiod_set_value_cansleep (chip->gpiod_oe,0 ); +} + +static int gen_74x164_activate (struct device *dev,struct gen_74x164_chip *chip) +{ +gpiod_set_value_cansleep (chip->gpiod_oe,1 ); +return devm_add_action_or_reset (dev, gen_74x164_deactivate, chip); +} +static int gen_74x164_probe (struct spi_device *spi) {struct device *dev = &spi->dev;
@@ -128,8 +141,6 @@ static int gen_74x164_probe(struct spi_device *spi)if (IS_ERR (chip->gpiod_oe))return PTR_ERR (chip->gpiod_oe); -spi_set_drvdata (spi, chip); - chip->gpio_chip.label = spi->modalias; chip->gpio_chip.direction_output = gen_74x164_direction_output; chip->gpio_chip.get = gen_74x164_get_value;
@@ -149,18 +160,13 @@ static int gen_74x164_probe(struct spi_device *spi)if (ret)return dev_err_probe (&spi->dev, ret,"Config write failed\n" ); -gpiod_set_value_cansleep (chip->gpiod_oe,1 ); + ret =gen_74x164_activate (dev, chip); +if (ret) +return ret;return devm_gpiochip_add_data (&spi->dev, &chip->gpio_chip, chip); } -static void gen_74x164_remove (struct spi_device *spi) -{ -struct gen_74x164_chip *chip =spi_get_drvdata (spi); - -gpiod_set_value_cansleep (chip->gpiod_oe,0 ); -} -static const struct spi_device_id gen_74x164_spi_ids[] = { { .name ="74hc595" }, { .name ="74lvc594" },
@@ -181,7 +187,6 @@ static struct spi_driver gen_74x164_driver = { .of_match_table = gen_74x164_dt_ids, }, .probe = gen_74x164_probe, - .remove = gen_74x164_remove, .id_table = gen_74x164_spi_ids, };module_spi_driver (gen_74x164_driver);
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
PATCH v2 6/7 gpio: 74x164: Switch to use dev_err_probe()
In reply to Andy ShevchenkoSwitch to use dev_err_probe() to simplify the error path and unify a message template.
--- drivers/gpio/gpio-74x164.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/gpio/gpio-74x164.c +2 -4
@@ -125,10 +125,8 @@ static int gen_74x164_probe(struct spi_device *spi)return ret; ret =device_property_read_u32 (&spi->dev,"registers-number" , &nregs); -if (ret) { -dev_err (&spi->dev,"Missing 'registers-number' property.\n" ); -return -EINVAL ; - } +if (ret) +return dev_err_probe (dev, ret,"Missing 'registers-number' property.\n" ); chip =devm_kzalloc (dev,struct_size (chip, buffer, nregs),GFP_KERNEL );if (!chip)
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
PATCH v2 7/7 gpio: 74x164: Utilise temporary variable for struct device
In reply to Andy ShevchenkoWe have a temporary variable to keep a pointer to struct device. Utilise it where it makes sense.
--- drivers/gpio/gpio-74x164.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/gpio/gpio-74x164.c +3 -4
@@ -124,7 +124,7 @@ static int gen_74x164_probe(struct spi_device *spi)if (ret <0 )return ret; - ret =device_property_read_u32 (&spi->dev,"registers-number" , &nregs); + ret =device_property_read_u32 (dev,"registers-number" , &nregs);if (ret)return dev_err_probe (dev, ret,"Missing 'registers-number' property.\n" );
@@ -134,8 +134,7 @@ static int gen_74x164_probe(struct spi_device *spi) chip->registers = nregs; - chip->gpiod_oe =devm_gpiod_get_optional (&spi->dev,"enable" , -GPIOD_OUT_LOW ); + chip->gpiod_oe =devm_gpiod_get_optional (dev,"enable" ,GPIOD_OUT_LOW );if (IS_ERR (chip->gpiod_oe))return PTR_ERR (chip->gpiod_oe);
@@ -147,7 +146,7 @@ static int gen_74x164_probe(struct spi_device *spi) chip->gpio_chip.base =-1 ; chip->gpio_chip.ngpio =GEN_74X164_NUMBER_GPIOS * chip->registers; chip->gpio_chip.can_sleep = true; - chip->gpio_chip.parent = &spi->dev; + chip->gpio_chip.parent = dev; chip->gpio_chip.owner =THIS_MODULE ; ret =devm_mutex_init (&spi->dev, &chip->lock);
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
Re: [PATCH v2 7/7] gpio: 74x164: Utilise temporary variable for struct device
Quoted 2 lines · Andy Shevchenko
We have a temporary variable to keep a pointer to struct device. Utilise it where it makes sense.
Urgh, this seems incomplete...
There are more lines to convert, however they do not affect ± statistics.
Tell me if I need to send full v3 or just this patch.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH v2 7/7] gpio: 74x164: Utilise temporary variable for struct device
Quoted 5 lines · Andy Shevchenko
Quoted 2 lines · Andy Shevchenko
We have a temporary variable to keep a pointer to struct device. Utilise it where it makes sense.
Quoted 10 lines
Urgh, this seems incomplete...
There are more lines to convert, however they do not affect ą statistics.Tell me if I need to send full v3 or just this patch.
--
With Best Regards,
Andy Shevchenko
No worries, I may fix it when applying.
I'll still give this series a few more days on the list.
Bart
Re: [PATCH v2 7/7] gpio: 74x164: Utilise temporary variable for struct device
Quoted 7 lines · Bartosz Golaszewski
Quoted 5 lines · Andy Shevchenko
Quoted 2 lines · Andy Shevchenko
We have a temporary variable to keep a pointer to struct device. Utilise it where it makes sense.
Quoted 8 lines
Quoted 4 lines
Urgh, this seems incomplete...
There are more lines to convert, however they do not affect ą statistics.Tell me if I need to send full v3 or just this patch.
No worries, I may fix it when applying.
I'll still give this series a few more days on the list.
Sure, thanks!
Signature · 2 lines
With Best Regards, Andy Shevchenko
Bartosz Golaszewski
AppliedFrom: Bartosz Golaszewski <[email protected]>
Quoted 8 lines · Andy Shevchenko
Seems like I have had a cleanup series for 74x164, but forgot to send it last year, here it is.
Changelog v2:
- remove ->remove() leftover (Bart)
- collected tags (Geert, Gustavo)[...]
Applied, thanks!
[1/7] gpio: 74x164: Remove unneeded dependency to OF_GPIO
commit: cd323c6e62dd98035c141b6f751e5b2b7d490b2e
[2/7] gpio: 74x164: Simplify code with cleanup helpers
commit: bdd603acf6a2b5056dc174e52bc8b285da529dc4
[3/7] gpio: 74x164: Annotate buffer with __counted_by()
commit: d746cc6e64027e331769f871a595a3dd2c6b30ff
[4/7] gpio: 74x164: Make use of the macros from bits.h
commit: e742e6b02d858ff9f6a7b43d0b1b5aae9c7e5cf5
[5/7] gpio: 74x164: Fully convert to use managed resources
commit: abe3817fa1dcae480ec7b71ec1608454cb65d0b8
[6/7] gpio: 74x164: Switch to use dev_err_probe()
commit: 9bd2dbe4066b3821b68f3e18ba91a3a1cd6354df
[7/7] gpio: 74x164: Utilise temporary variable for struct device
commit: 5892cfc7db9814a71c991da7024fa03384e48924Best regards,
Signature · 1 line
Bartosz Golaszewski <[email protected]>