Skip to contentSkip to conversation

move_pages_pte() fixes

PATCH Applied Suren Baghdasaryan 3 participants 5 messages Feb 26, 2025

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover move_pages_pte() fixes

Patchset bundles two *unrelated* fixes in move_pages_pte because otherwise they would create a merge conflict. The first fix which was posted before at [1] fixes a livelock issue. The second change corrects the use of PTEs when unmapping them.

The patchset applies cleanly over mm-hotfixes-unstable which contains Barry's fix [2] that changes related code.

[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/

Suren Baghdasaryan (2):
userfaultfd: do not block on locking a large folio with raised
refcount
userfaultfd: fix PTE unmapping stack-allocated PTE copies

 mm/userfaultfd.c | 37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

base-commit: a88b5ef577dd7ddb8606ef233c0634f05e884d4a

Signature · 1 line
2.48.1.658.g4767266eb4-goog
#1 lore raw

PATCH 1/2 userfaultfd: do not block on locking a large folio with raised refcount

Lokesh recently raised an issue about UFFDIO_MOVE getting into a deadlock state when it goes into split_folio() with raised folio refcount. split_folio() expects the reference count to be exactly mapcount + num_pages_in_folio + 1 (see can_split_folio()) and fails with EAGAIN otherwise. If multiple processes are trying to move the same large folio, they raise the refcount (all tasks succeed in that) then one of them succeeds in locking the folio, while others will block in folio_lock() while keeping the refcount raised. The winner of this race will proceed with calling split_folio() and will fail returning EAGAIN to the caller and unlocking the folio. The next competing process will get the folio locked and will go through the same flow. In the meantime the original winner will be retried and will block in folio_lock(), getting into the queue of waiting processes only to repeat the same path. All this results in a livelock.
An easy fix would be to avoid waiting for the folio lock while holding folio refcount, similar to madvise_free_huge_pmd() where folio lock is acquired before raising the folio refcount. Since we lock and take a refcount of the folio while holding the PTE lock, changing the order of these operations should not break anything.
Modify move_pages_pte() to try locking the folio first and if that fails and the folio is large then return EAGAIN without touching the folio refcount. If the folio is single-page then split_folio() is not called, so we don't have this issue.
Lokesh has a reproducer [1] and I verified that this change fixes the issue.

[1] https://github.com/lokeshgidra/uffd_move_ioctl_deadlock

Fixes adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")

---
Note this patch is v2 of [2] but I did not bump up the version because now it's part of the patchset which is at its v1. Hopefully that's not too confusing.

Changes since v1 [2]:
- Rebased over mm-hotfixes-unstable to avoid merge conflicts with [3]
- Added Reviewed-by, per Peter Xu
- Added a note about PTL lock in the changelog, per Liam R. Howlett
- CC'ed stable

[2] https://lore.kernel.org/all/[email protected]/
[3] https://lore.kernel.org/all/[email protected]/

 mm/userfaultfd.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
mm/userfaultfd.c +16 -1
index 8eae4ea3cafd..e0f1e38ac5d8 100644
@@ -1250,6 +1250,7 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd,
 		 */
 		if (!src_folio) {
 			struct folio *folio;
+			bool locked;
 
 			/*
 			 * Pin the page while holding the lock to be sure the
@@ -1269,12 +1270,26 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd,
 				goto out;
 			}
 
+			locked = folio_trylock(folio);
+			/*
+			 * We avoid waiting for folio lock with a raised refcount
+			 * for large folios because extra refcounts will result in
+			 * split_folio() failing later and retrying. If multiple
+			 * tasks are trying to move a large folio we can end
+			 * livelocking.
+			 */
+			if (!locked && folio_test_large(folio)) {
+				spin_unlock(src_ptl);
+				err = -EAGAIN;
+				goto out;
+			}
+
 			folio_get(folio);
 			src_folio = folio;
 			src_folio_pte = orig_src_pte;
 			spin_unlock(src_ptl);
 
-			if (!folio_trylock(src_folio)) {
+			if (!locked) {
 				pte_unmap(&orig_src_pte);
 				pte_unmap(&orig_dst_pte);
 				src_pte = dst_pte = NULL;
Signature · 1 line
2.48.1.658.g4767266eb4-goog
Acked-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] userfaultfd: do not block on locking a large folio with raised refcount

Quoted 26 lines · Suren Baghdasaryan

Lokesh recently raised an issue about UFFDIO_MOVE getting into a deadlock state when it goes into split_folio() with raised folio refcount. split_folio() expects the reference count to be exactly mapcount + num_pages_in_folio + 1 (see can_split_folio()) and fails with EAGAIN otherwise. If multiple processes are trying to move the same large folio, they raise the refcount (all tasks succeed in that) then one of them succeeds in locking the folio, while others will block in folio_lock() while keeping the refcount raised. The winner of this race will proceed with calling split_folio() and will fail returning EAGAIN to the caller and unlocking the folio. The next competing process will get the folio locked and will go through the same flow. In the meantime the original winner will be retried and will block in folio_lock(), getting into the queue of waiting processes only to repeat the same path. All this results in a livelock.
An easy fix would be to avoid waiting for the folio lock while holding folio refcount, similar to madvise_free_huge_pmd() where folio lock is acquired before raising the folio refcount. Since we lock and take a refcount of the folio while holding the PTE lock, changing the order of these operations should not break anything.
Modify move_pages_pte() to try locking the folio first and if that fails and the folio is large then return EAGAIN without touching the folio refcount. If the folio is single-page then split_folio() is not called, so we don't have this issue.
Lokesh has a reproducer [1] and I verified that this change fixes the issue.

Quoted 7 lines

[1] https://github.com/lokeshgidra/uffd_move_ioctl_deadlock

Fixes adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Quoted 60 lines

---
Note this patch is v2 of [2] but I did not bump up the version because now it's part of the patchset which is at its v1. Hopefully that's not too confusing.

Changes since v1 [2]:
- Rebased over mm-hotfixes-unstable to avoid merge conflicts with [3]
- Added Reviewed-by, per Peter Xu
- Added a note about PTL lock in the changelog, per Liam R. Howlett
- CC'ed stable

[2] https://lore.kernel.org/all/[email protected]/
[3] https://lore.kernel.org/all/[email protected]/

 mm/userfaultfd.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
mm/userfaultfd.c +16 -1
index 8eae4ea3cafd..e0f1e38ac5d8 100644
@@ -1250,6 +1250,7 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd,
 		 */
 		if (!src_folio) {
 			struct folio *folio;
+			bool locked;
 
 			/*
 			 * Pin the page while holding the lock to be sure the
@@ -1269,12 +1270,26 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd,
 				goto out;
 			}
 
+			locked = folio_trylock(folio);
+			/*
+			 * We avoid waiting for folio lock with a raised refcount
+			 * for large folios because extra refcounts will result in
+			 * split_folio() failing later and retrying. If multiple
+			 * tasks are trying to move a large folio we can end
+			 * livelocking.
+			 */
+			if (!locked && folio_test_large(folio)) {
+				spin_unlock(src_ptl);
+				err = -EAGAIN;
+				goto out;
+			}
+
 			folio_get(folio);
 			src_folio = folio;
 			src_folio_pte = orig_src_pte;
 			spin_unlock(src_ptl);
 
-			if (!folio_trylock(src_folio)) {
+			if (!locked) {
 				pte_unmap(&orig_src_pte);
 				pte_unmap(&orig_dst_pte);
 				src_pte = dst_pte = NULL;
Signature · 1 line
2.48.1.658.g4767266eb4-goog
#3 lore raw

PATCH 2/2 userfaultfd: fix PTE unmapping stack-allocated PTE copies

In reply to Suren Baghdasaryan

Current implementation of move_pages_pte() copies source and destination PTEs in order to detect concurrent changes to PTEs involved in the move. However these copies are also used to unmap the PTEs, which will fail if CONFIG_HIGHPTE is enabled because the copies are allocated on the stack. Fix this by using the actual PTEs which were kmap()ed.

Fixes adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
---
 mm/userfaultfd.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
mm/userfaultfd.c +10 -10
index e0f1e38ac5d8..dda1c9a3662a 100644
@@ -1290,8 +1290,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd,
 			spin_unlock(src_ptl);
 
 			if (!locked) {
-				pte_unmap(&orig_src_pte);
-				pte_unmap(&orig_dst_pte);
+				pte_unmap(src_pte);
+				pte_unmap(dst_pte);
 				src_pte = dst_pte = NULL;
 				/* now we can block and wait */
 				folio_lock(src_folio);
@@ -1307,8 +1307,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd,
 		/* at this point we have src_folio locked */
 		if (folio_test_large(src_folio)) {
 			/* split_folio() can block */
-			pte_unmap(&orig_src_pte);
-			pte_unmap(&orig_dst_pte);
+			pte_unmap(src_pte);
+			pte_unmap(dst_pte);
 			src_pte = dst_pte = NULL;
 			err = split_folio(src_folio);
 			if (err)
@@ -1333,8 +1333,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd,
 				goto out;
 			}
 			if (!anon_vma_trylock_write(src_anon_vma)) {
-				pte_unmap(&orig_src_pte);
-				pte_unmap(&orig_dst_pte);
+				pte_unmap(src_pte);
+				pte_unmap(dst_pte);
 				src_pte = dst_pte = NULL;
 				/* now we can block and wait */
 				anon_vma_lock_write(src_anon_vma);
@@ -1352,8 +1352,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd,
 		entry = pte_to_swp_entry(orig_src_pte);
 		if (non_swap_entry(entry)) {
 			if (is_migration_entry(entry)) {
-				pte_unmap(&orig_src_pte);
-				pte_unmap(&orig_dst_pte);
+				pte_unmap(src_pte);
+				pte_unmap(dst_pte);
 				src_pte = dst_pte = NULL;
 				migration_entry_wait(mm, src_pmd, src_addr);
 				err = -EAGAIN;
@@ -1396,8 +1396,8 @@ static int move_pages_pte(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd,
 			src_folio = folio;
 			src_folio_pte = orig_src_pte;
 			if (!folio_trylock(src_folio)) {
-				pte_unmap(&orig_src_pte);
-				pte_unmap(&orig_dst_pte);
+				pte_unmap(src_pte);
+				pte_unmap(dst_pte);
 				src_pte = dst_pte = NULL;
 				/* now we can block and wait */
 				folio_lock(src_folio);
Signature · 1 line
2.48.1.658.g4767266eb4-goog
reviewer Reviewed-by on v1 2/2
#4 lore raw

Re: [PATCH 2/2] userfaultfd: fix PTE unmapping stack-allocated PTE copies

Quoted 10 lines · Suren Baghdasaryan

Current implementation of move_pages_pte() copies source and destination PTEs in order to detect concurrent changes to PTEs involved in the move. However these copies are also used to unmap the PTEs, which will fail if CONFIG_HIGHPTE is enabled because the copies are allocated on the stack. Fix this by using the actual PTEs which were kmap()ed.

Fixes adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signature · 1 line
Peter Xu