ARM: dts: imx53-ppd: Fix touchscreen reset-gpios

From: Fabio Estevam <[email protected]>

According to atmel,maxtouch.yaml, the correct property that describes the GPIO connected to the touchscreen reset line is 'reset-gpios'.

Change it accordingly to fix the following dt-schema warning:

'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+'

---
Changes since v1:
- Fix Subject.

 arch/arm/boot/dts/nxp/imx/imx53-ppd.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index e939acc1c88b..2892e457fea7 100644
@@ -593,7 +593,7 @@ &i2c2 {
 
 	touchscreen@4b {
 		compatible = "atmel,maxtouch";
-		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
 		reg = <0x4b>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;

2.34.1

Applied, thanks!