gre: Fix regressions in IPv6 link-local address generation.

new file mode 100755
index 000000000000..85e40b6df55e
@@ -0,0 +1,227 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+ERR=4 # Return 4 by default, which is the SKIP code for kselftest
+PAUSE_ON_FAIL="no"
+
+readonly NS0=$(mktemp -u ns0-XXXXXXXX)
+
+# Exit the script after having removed the network namespaces it created
+#
+# Parameters:
+#
+#   * The list of network namespaces to delete before exiting.
+#
+exit_cleanup()
+{
+	for ns in "$@"; do
+		ip netns delete "${ns}" 2>/dev/null || true
+	done
+
+	if [ "${ERR}" -eq 4 ]; then
+		echo "Error: Setting up the testing environment failed." >&2
+	fi
+
+	exit "${ERR}"
+}
+
+# Create the network namespaces used by the script (NS0)
+#
+create_namespaces()
+{
+	ip netns add "${NS0}" || exit_cleanup
+}
+
+# The trap function handler
+#
+exit_cleanup_all()
+{
+	exit_cleanup "${NS0}"
+}
+
+# Add fake IPv4 and IPv6 networks on the loopback device, to be used as
+# underlay by future GRE devices.
+#
+setup_basenet()
+{
+	ip -netns "${NS0}" link set dev lo up
+	ip -netns "${NS0}" address add dev lo 192.0.2.10/24
+	ip -netns "${NS0}" address add dev lo 2001:db8::10/64 nodad
+}
+
+# Check if network device has an IPv6 link-local address assigned.
+#
+# Parameters:
+#
+#   * $1: The network device to test
+#   * $2: An extra regular expression that should be matched (to verify the
+#         presence of extra attributes)
+#   * $3: The expected return code from grep (to allow checking the abscence of
+#         a link-local address)
+#   * $4: The user visible name for the scenario being tested
+#
+check_ipv6_ll_addr()
+{
+	local DEV="$1"
+	local EXTRA_MATCH="$2"
+	local XRET="$3"
+	local MSG="$4"
+	local RET
+
+	printf "%-75s  " "${MSG}"
+
+	set +e
+	ip -netns "${NS0}" -6 address show dev "${DEV}" scope link | grep "fe80::" | grep -q "${EXTRA_MATCH}"
+	RET=$?
+	set -e
+
+	if [ "${RET}" -eq "${XRET}" ]; then
+		printf "[ OK ]\n"
+	else
+		ERR=1
+		printf "[FAIL]\n"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			printf "\nHit enter to continue, 'q' to quit\n"
+			read -r a
+			if [ "$a" = "q" ]; then
+				exit 1
+			fi
+		fi
+	fi
+}
+
+
+# Create a GRE device and verify that it gets an IPv6 link-local address as
+# expected.
+#
+# Parameters:
+#
+#   * $1: The device type (gre, ip6gre, gretap or ip6gretap)
+#   * $2: The local underlay IP address (can be an IPv4, an IPv6 or "any")
+#   * $3: The remote underlay IP address (can be an IPv4, an IPv6 or "any")
+#   * $4: The IPv6 interface identifier generation mode to use for the GRE
+#         device (eui64, none, stable-privacy or random).
+#
+test_gre_device()
+{
+	local GRE_TYPE="$1"
+	local LOCAL_IP="$2"
+	local REMOTE_IP="$3"
+	local MODE="$4"
+	local ADDR_GEN_MODE
+	local MATCH_REGEXP
+	local MSG
+
+	ip link add netns "${NS0}" name gretest type "${GRE_TYPE}" local "${LOCAL_IP}" remote "${REMOTE_IP}"
+
+	case "${MODE}" in
+	    "eui64")
+		ADDR_GEN_MODE=0
+		MATCH_REGEXP=""
+		MSG="${GRE_TYPE}, mode: 0 (EUI64), ${LOCAL_IP} -> ${REMOTE_IP}"
+		XRET=0
+		;;
+	    "none")
+		ADDR_GEN_MODE=1
+		MATCH_REGEXP=""
+		MSG="${GRE_TYPE}, mode: 1 (none), ${LOCAL_IP} -> ${REMOTE_IP}"
+		XRET=1 # No link-local address should be generated
+		;;
+	    "stable-privacy")
+		ADDR_GEN_MODE=2
+		MATCH_REGEXP="stable-privacy"
+		MSG="${GRE_TYPE}, mode: 2 (stable privacy), ${LOCAL_IP} -> ${REMOTE_IP}"
+		XRET=0
+		# Initialise stable_secret (required for stable-privacy mode)
+		ip netns exec "${NS0}" sysctl -qw net.ipv6.conf.gretest.stable_secret="2001:db8::abcd"
+		;;
+	    "random")
+		ADDR_GEN_MODE=3
+		MATCH_REGEXP="stable-privacy"
+		MSG="${GRE_TYPE}, mode: 3 (random), ${LOCAL_IP} -> ${REMOTE_IP}"
+		XRET=0
+		;;
+	esac
+
+	# Check that IPv6 link-local address is generated when device goes up
+	ip netns exec "${NS0}" sysctl -qw net.ipv6.conf.gretest.addr_gen_mode="${ADDR_GEN_MODE}"
+	ip -netns "${NS0}" link set dev gretest up
+	check_ipv6_ll_addr gretest "${MATCH_REGEXP}" "${XRET}" "config: ${MSG}"
+
+	# Now disable link-local address generation
+	ip -netns "${NS0}" link set dev gretest down
+	ip netns exec "${NS0}" sysctl -qw net.ipv6.conf.gretest.addr_gen_mode=1
+	ip -netns "${NS0}" link set dev gretest up
+
+	# Check that link-local address generation works when re-enabled while
+	# the device is already up
+	ip netns exec "${NS0}" sysctl -qw net.ipv6.conf.gretest.addr_gen_mode="${ADDR_GEN_MODE}"
+	check_ipv6_ll_addr gretest "${MATCH_REGEXP}" "${XRET}" "update: ${MSG}"
+
+	ip -netns "${NS0}" link del dev gretest
+}
+
+test_gre4()
+{
+	local GRE_TYPE
+	local MODE
+
+	for GRE_TYPE in "gre" "gretap"; do
+		printf "\n####\nTesting IPv6 link-local address generation on ${GRE_TYPE} devices\n####\n\n"
+
+		for MODE in "eui64" "none" "stable-privacy" "random"; do
+			test_gre_device "${GRE_TYPE}" 192.0.2.10 192.0.2.11 "${MODE}"
+			test_gre_device "${GRE_TYPE}" any 192.0.2.11 "${MODE}"
+			test_gre_device "${GRE_TYPE}" 192.0.2.10 any "${MODE}"
+		done
+	done
+}
+
+test_gre6()
+{
+	local GRE_TYPE
+	local MODE
+
+	for GRE_TYPE in "ip6gre" "ip6gretap"; do
+		printf "\n####\nTesting IPv6 link-local address generation on ${GRE_TYPE} devices\n####\n\n"
+
+		for MODE in "eui64" "none" "stable-privacy" "random"; do
+			test_gre_device "${GRE_TYPE}" 2001:db8::10 2001:db8::11 "${MODE}"
+			test_gre_device "${GRE_TYPE}" any 2001:db8::11 "${MODE}"
+			test_gre_device "${GRE_TYPE}" 2001:db8::10 any "${MODE}"
+		done
+	done
+}
+
+usage()
+{
+	echo "Usage: $0 [-p]"
+	exit 1
+}
+
+while getopts :p o
+do
+	case $o in
+		p) PAUSE_ON_FAIL="yes";;
+		*) usage;;
+	esac
+done
+
+# Create namespaces before setting up the exit trap.
+# Otherwise, exit_cleanup_all() could delete namespaces that were not created
+# by this script.
+create_namespaces
+
+set -e
+trap exit_cleanup_all EXIT
+
+setup_basenet
+
+test_gre4
+test_gre6
+
+if [ "${ERR}" -eq 1 ]; then
+	echo "Some tests failed." >&2
+else
+	ERR=0
+fi