drm/sched: Documentation and refcount improvements
Subsystems (3)
Philipp Stanner
maintainerv7 cover drm/sched: Documentation and refcount improvements
Changes in v7:
- Add Christian's info about violated dma_fence rules. (Christian)
- Fix some typos
Changes in v6:
- Switch patches 1 and 2. (Maira)
- Move section related to run_job() out of timedout_job() patch.
(Maira).
- Fix some places for correct crosslink references.
- Add comment to inform about run_job() incrementing the refcount. (Danilo)
Changes in v5:
- Fix broken enumarated list in timedout_job's docu.
- Add TODO for documenting the dma_fence rules in timedout_job one day.
Changes in v4:
- Remove mention of vague "dma_fence rules" in timedout_job() again since I couldn't get input on what those rules precisely are.
- Address a forgotten TODO. (Me)
- Reposition "Return:" statements to make them congruent with the official kernel style. (Tvrtko)
- Change formatting a bit because of crazy make htmldocs errors. (Me)
Changes in v3:
- timedout_job(): various docu wording improvements. (Danilo)
- Use the term "ring" consistently. (Danilo)
- Add fully fledged docu for enum drm_gpu_sched_stat. (Danilo)
Changes in v2:
- Document what run_job() is allowed to return. (Tvrtko)
- Delete confusing comment about putting the fence. (Danilo)
- Apply Danilo's RB to patch 1.
- Delete info about job recovery for entities in patch 3. (Danilo, me)
- Set the term "ring" as fix term for both HW rings and FW rings. A ring shall always be the thingy on the CPU ;) (Danilo)
- Many (all) other comments improvements in patch 3. (Danilo)
This is as series succeeding my previous patch [1].
I recognized that we are still referring to a non-existing function and a deprecated one in the callback docu. We should probably also point out the important distinction between hardware and firmware schedulers more cleanly.
Please give me feedback, especially on the RFC comments in patch3.
(This series still fires docu-build-warnings. I want to gather feedback on the opion questions first and will solve them in v2.)
Thank you,
Philipp
[1] https://lore.kernel.org/all/[email protected]/
Philipp Stanner (3):
drm/sched: Adjust outdated docu for run_job() drm/sched: Document run_job() refcount hazard drm/sched: Update timedout_job()'s documentation
drivers/gpu/drm/scheduler/sched_main.c | 9 +- include/drm/gpu_scheduler.h | 112 +++++++++++++++++-------- 2 files changed, 83 insertions(+), 38 deletions(-)
Signature · 1 line
2.48.1
Philipp Stanner
maintainerPATCH v7 1/3 drm/sched: Adjust outdated docu for run_job()
The documentation for drm_sched_backend_ops.run_job() mentions a certain function called drm_sched_job_recovery(). This function does not exist. What's actually meant is drm_sched_resubmit_jobs(), which is by now also deprecated.
Furthermore, the scheduler expects to "inherit" a reference on the fence from the run_job() callback. This, so far, is also not documented.
Remove the mention of the removed function.
Discourage the behavior of drm_sched_backend_ops.run_job() being called multiple times for the same job.
Document the necessity of incrementing the refcount in run_job().
--- include/drm/gpu_scheduler.h | 34 ++++++++++++++++++++++++++++++---- 1 file changed, 30 insertions(+), 4 deletions(-)
include/drm/gpu_scheduler.h +30 -4
@@ -410,10 +410,36 @@ struct drm_sched_backend_ops { struct drm_sched_entity *s_entity);/** -* @run_job: Called to execute the job once all of the dependencies -* have been resolved. This may be called multiple times, if -* timedout_job() has happened and drm_sched_job_recovery() -* decides to try it again. +* @run_job: Called to execute the job once all of the dependencies +* have been resolved. +* +* @sched_job: the job to run +* +* The deprecated drm_sched_resubmit_jobs() (called by &struct +* drm_sched_backend_ops.timedout_job) can invoke this again with the +* same parameters. Using this is discouraged because it violates +* dma_fence rules, notably dma_fence_init() has to be called on +* already initialized fences for a second time. Moreover, this is +* dangerous because attempts to allocate memory might deadlock with +* memory management code waiting for the reset to complete. +* +* TODO: Document what drivers should do / use instead. +* +* This method is called in a workqueue context - either from the +* submit_wq the driver passed through drm_sched_init(), or, if the +* driver passed NULL, a separate, ordered workqueue the scheduler +* allocated. +* +* Note that the scheduler expects to 'inherit' its own reference to +* this fence from the callback. It does not invoke an extra +* dma_fence_get() on it. Consequently, this callback must take a +* reference for the scheduler, and additional ones for the driver's +* respective needs. +* +* Return: +* * On success: dma_fence the driver must signal once the hardware has +* completed the job ("hardware fence"). +* * On failure: NULL or an ERR_PTR. */ struct dma_fence *(*run_job)(struct drm_sched_job *sched_job);
Signature · 1 line
2.48.1
Re: [PATCH v7 1/3] drm/sched: Adjust outdated docu for run_job()
Quoted 9 lines · Philipp Stanner
include/drm/gpu_scheduler.h +4
-4/** -* @run_job: Called to execute the job once all of the dependencies -* have been resolved. This may be called multiple times, if -* timedout_job() has happened and drm_sched_job_recovery() -* decides to try it again. +* @run_job: Called to execute the job once all of the dependencies +* have been resolved. +* +* @sched_job: the job to run
include/drm/gpu_scheduler.h struct drm_sched_backend_ops { · line 426
Quoted 10 lines
include/drm/gpu_scheduler.h +10
-0+* +* The deprecated drm_sched_resubmit_jobs() (called by &struct +* drm_sched_backend_ops.timedout_job) can invoke this again with the +* same parameters. Using this is discouraged because it violates +* dma_fence rules, notably dma_fence_init() has to be called on +* already initialized fences for a second time. Moreover, this is +* dangerous because attempts to allocate memory might deadlock with +* memory management code waiting for the reset to complete. +* +* TODO: Document what drivers should do / use instead.
No replacement? Or bespoke/roll-your-own functionality as a must?
Confused...
Signature · 1 line
An old man doll... just what I always wanted! - Clara
Re: [PATCH v7 1/3] drm/sched: Adjust outdated docu for run_job()
Quoted 34 lines · Bagas Sanjaya
Quoted 28 lines · Philipp Stanner
/**
- * @run_job: Called to execute the job once all of the dependencies
- * have been resolved. This may be called multiple times, if(quoted diff) +0
-1- * timedout_job() has happened and
drm_sched_job_recovery()(quoted diff) +1
-1- * decides to try it again. + * @run_job: Called to execute the job once all of thedependencies
include/drm/gpu_scheduler.h +5
-0+* have been resolved. +* +* @sched_job: the job to run +* +* The deprecated drm_sched_resubmit_jobs() (called by &struct
(quoted diff) +1
-0+ * drm_sched_backend_ops.timedout_job) can invoke thisagain with the
(quoted diff) +1
-0+ * same parameters. Using this is discouraged because itviolates
(quoted diff) +1
-0+ * dma_fence rules, notably dma_fence_init() has to becalled on
(quoted diff) +1
-0+ * already initialized fences for a second time. Moreover,this is
(quoted diff) +1
-0+ * dangerous because attempts to allocate memory mightdeadlock with
(quoted diff) +1
-0+ * memory management code waiting for the reset tocomplete.
Review
Quoted 2 lines
(quoted diff) +2
-0+ * + * TODO: Document what drivers should do / use instead.No replacement? Or bespoke/roll-your-own functionality as a must?
Quoted 1 line
Confused...
We will document this in a follow-up. I'm trying for 2 months now [1] just to fix up some broken, outdated documentation – and that in a component that *I* am maintaining.
It's very difficult to reach the relevant stakeholders, and I really want to unblock this series.
Feel free to provide a proposal for the TODO based on this series or jump into the discussion here [2].
Otherwise I will propose a fix for the TODO some time the next weeks.
P.
[1] https://lore.kernel.org/dri-devel/[email protected]/
[2] https://lore.kernel.org/dri-devel/[email protected]/
Re: [PATCH v7 1/3] drm/sched: Adjust outdated docu for run_job()
In reply to Philipp StannerHi Philipp,
Quoted 34 lines · Philipp Stanner
The documentation for
drm_sched_backend_ops.run_job()mentions a certain function calleddrm_sched_job_recovery(). This function does not exist. What's actually meant isdrm_sched_resubmit_jobs(), which is by now also deprecated.Furthermore, the scheduler expects to "inherit" a reference on the fence from the
run_job()callback. This, so far, is also not documented.Remove the mention of the removed function.
Discourage the behavior of
drm_sched_backend_ops.run_job()being called multiple times for the same job.Document the necessity of incrementing the refcount in
run_job().Signed-off-by Philipp Stanner <[email protected]>--- include/drm/gpu_scheduler.h | 34 ++++++++++++++++++++++++++++++---- 1 file changed, 30 insertions(+), 4 deletions(-)include/drm/gpu_scheduler.h +2
-4@@ -410,10 +410,36 @@ struct drm_sched_backend_ops { struct drm_sched_entity *s_entity);/** -* @run_job: Called to execute the job once all of the dependencies -* have been resolved. This may be called multiple times, if -* timedout_job() has happened and drm_sched_job_recovery() -* decides to try it again. +* @run_job: Called to execute the job once all of the dependencies +* have been resolved.
include/drm/gpu_scheduler.h struct drm_sched_backend_ops { · line 424
Quoted 10 lines
include/drm/gpu_scheduler.h +10
-0+* +* @sched_job: the job to run +* +* The deprecated drm_sched_resubmit_jobs() (called by &struct +* drm_sched_backend_ops.timedout_job) can invoke this again with the +* same parameters. Using this is discouraged because it violates +* dma_fence rules, notably dma_fence_init() has to be called on +* already initialized fences for a second time. Moreover, this is +* dangerous because attempts to allocate memory might deadlock with +* memory management code waiting for the reset to complete.
Thanks for adding this paragraph! Also, thanks Christian for providing this explanation in v5. It really helped clarify the reasoning behind deprecating drm_sched_resubmit_jobs().
Best Regards,
- Maíra
Quoted 21 lines
include/drm/gpu_scheduler.h +18
-0+* +* TODO: Document what drivers should do / use instead. +* +* This method is called in a workqueue context - either from the +* submit_wq the driver passed through drm_sched_init(), or, if the +* driver passed NULL, a separate, ordered workqueue the scheduler +* allocated. +* +* Note that the scheduler expects to 'inherit' its own reference to +* this fence from the callback. It does not invoke an extra +* dma_fence_get() on it. Consequently, this callback must take a +* reference for the scheduler, and additional ones for the driver's +* respective needs. +* +* Return: +* * On success: dma_fence the driver must signal once the hardware has +* completed the job ("hardware fence"). +* * On failure: NULL or an ERR_PTR. */ struct dma_fence *(*run_job)(struct drm_sched_job *sched_job);
Re: [PATCH v7 1/3] drm/sched: Adjust outdated docu for run_job()
Quoted 60 lines · Maíra Canal
Hi Philipp,
Quoted 57 lines · Philipp Stanner
The documentation for
drm_sched_backend_ops.run_job()mentions a certain
function calleddrm_sched_job_recovery(). This function does not exist.
What's actually meant isdrm_sched_resubmit_jobs(), which is by now also
deprecated.Furthermore, the scheduler expects to "inherit" a reference on the fence
from therun_job()callback. This, so far, is also not documented.Remove the mention of the removed function.
Discourage the behavior of
drm_sched_backend_ops.run_job()being called
multiple times for the same job.Document the necessity of incrementing the refcount in
run_job().Signed-off-by Philipp Stanner <[email protected]>---
include/drm/gpu_scheduler.h| 34 ++++++++++++++++++++++++++++++-- --1 file changed, 30 insertions(+), 4 deletions(-)include/drm/gpu_scheduler.h +0
-0@@ -410,10 +410,36 @@ struct drm_sched_backend_ops {struct
drm_sched_entity*s_entity);
/**
- * @run_job: Called to execute the job once all of the dependencies
- * have been resolved. This may be called multiple times, ifinclude/drm/gpu_scheduler.h +0
-1-* timedout_job() has happened and
drm_sched_job_recovery()include/drm/gpu_scheduler.h +1
-1-* decides to try it again. +* @run_job: Called to execute the job once all of the dependencies
include/drm/gpu_scheduler.h +5
-0+* have been resolved. +* +* @sched_job: the job to run +* +* The deprecated drm_sched_resubmit_jobs() (called by &struct
include/drm/gpu_scheduler.h +1
-0+* drm_sched_backend_ops.timedout_job) can invoke this again with the
include/drm/gpu_scheduler.h +1
-0+* same parameters. Using this is discouraged because it violates
include/drm/gpu_scheduler.h +1
-0+* dma_fence rules, notably dma_fence_init() has to be called on
Quoted 8 lines
Quoted 6 lines
include/drm/gpu_scheduler.h +1
-0+* already initialized fences for a second time. Moreover, this is
include/drm/gpu_scheduler.h +1
-0+* dangerous because attempts to allocate memory might deadlock with
include/drm/gpu_scheduler.h +1
-0+* memory management code waiting for the reset to complete.
Thanks for adding this paragraph!
You're welcome
Quoted 3 lines
Also, thanks Christian for providing
this explanation in v5. It really helped clarify the reasoning behind deprecatingdrm_sched_resubmit_jobs().
I thought a bit more about it the last days and think that you are right and we definitely have to tell drivers with hardware scheduler how they can achieve that without using drm_sched_resubmit_jobs().
Unfortunately, I discovered that this is quite complicated and certainly difficult to do right.
So I'd only feel comfortable writing more docu about that once we got more input from Christian or someone else who's got a hardware scheduler about how they're currently doing it
Cheers
P.
Quoted 35 lines
Best Regards,
- MaíraQuoted 30 lines
include/drm/gpu_scheduler.h +4
-0+* +* TODO: Document what drivers should do / use instead. +* +* This method is called in a workqueue context - either from the
include/drm/gpu_scheduler.h +1
-0+* submit_wq the driver passed through drm_sched_init(), or, if the
include/drm/gpu_scheduler.h +1
-0+* driver passed NULL, a separate, ordered workqueue the scheduler
include/drm/gpu_scheduler.h +3
-0+* allocated. +* +* Note that the scheduler expects to 'inherit' its own reference to
include/drm/gpu_scheduler.h +1
-0+* this fence from the callback. It does not invoke an extra
include/drm/gpu_scheduler.h +1
-0+* dma_fence_get() on it. Consequently, this callback must take a
include/drm/gpu_scheduler.h +1
-0+* reference for the scheduler, and additional ones for the driver's
include/drm/gpu_scheduler.h +4
-0+* respective needs. +* +* Return: +* * On success: dma_fence the driver must signal once the hardware has
include/drm/gpu_scheduler.h +2
-0+* completed the job ("hardware fence"). +* * On failure: NULL or an ERR_PTR. */
structdma_fence*(*run_job)(structdrm_sched_job*sched_job);
Philipp Stanner
maintainerPATCH v7 2/3 drm/sched: Document run_job() refcount hazard
In reply to Philipp StannerFrom: Philipp Stanner <[email protected]>
drm_sched_backend_ops.run_job() returns a dma_fence for the scheduler. That fence is signalled by the driver once the hardware completed the associated job. The scheduler does not increment the reference count on that fence, but implicitly expects to inherit this fence from run_job().
This is relatively subtle and prone to misunderstandings.
This implies that, to keep a reference for itself, a driver needs to call dma_fence_get() in addition to dma_fence_init() in that callback.
It's further complicated by the fact that the scheduler even decrements the refcount in drm_sched_run_job_work() since it created a new reference in drm_sched_fence_scheduled(). It does, however, still use its pointer to the fence after calling dma_fence_put() - which is safe because of the aforementioned new reference, but actually still violates the refcounting rules.
Move the call to dma_fence_put() to the position behind the last usage of the fence.
--- drivers/gpu/drm/scheduler/sched_main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/scheduler/sched_main.c +6 -3
@@ -1216,20 +1216,23 @@ static void drm_sched_run_job_work(struct work_struct *w)drm_sched_job_begin (sched_job);trace_drm_run_job (sched_job, entity); +/* +* The run_job() callback must by definition return a fence whose +* refcount has been incremented for the scheduler already. +*/ fence = sched->ops->run_job (sched_job);complete_all (&entity->entity_idle);drm_sched_fence_scheduled (s_fence, fence);if (!IS_ERR_OR_NULL (fence)) { -/* Drop for original kref_init of the fence */ -dma_fence_put (fence); - r =dma_fence_add_callback (fence, &sched_job->cb, drm_sched_job_done_cb);if (r == -ENOENT )drm_sched_job_done (sched_job, fence->error);else if (r)DRM_DEV_ERROR (sched->dev,"fence add callback failed (%d)\n" , r); + +dma_fence_put (fence); }else {drm_sched_job_done (sched_job,IS_ERR (fence) ?PTR_ERR (fence) :0 );
Signature · 1 line
2.48.1
Philipp Stanner
maintainerPATCH v7 3/3 drm/sched: Update timedout_job()'s documentation
In reply to Philipp Stannerdrm_sched_backend_ops.timedout_job()'s documentation is outdated. It mentions the deprecated function drm_sched_resubmit_jobs(). Furthermore, it does not point out the important distinction between hardware and firmware schedulers.
Since firmware schedulers typically only use one entity per scheduler, timeout handling is significantly more simple because the entity the faulted job came from can just be killed without affecting innocent processes.
Update the documentation with that distinction and other details.
Reformat the docstring to work to a unified style with the other handles.
--- include/drm/gpu_scheduler.h | 78 ++++++++++++++++++++++--------------- 1 file changed, 47 insertions(+), 31 deletions(-)
include/drm/gpu_scheduler.h +47 -31
@@ -383,8 +383,15 @@ struct drm_sched_job {struct xarray dependencies; }; +/** +* enum drm_gpu_sched_stat - the scheduler's status +* +* @DRM_GPU_SCHED_STAT_NONE: Reserved. Do not use. +* @DRM_GPU_SCHED_STAT_NOMINAL: Operation succeeded. +* @DRM_GPU_SCHED_STAT_ENODEV: Error: Device is not available anymore. +*/ enum drm_gpu_sched_stat { -DRM_GPU_SCHED_STAT_NONE ,/* Reserve 0 */ +DRM_GPU_SCHED_STAT_NONE ,DRM_GPU_SCHED_STAT_NOMINAL ,DRM_GPU_SCHED_STAT_ENODEV , };
@@ -447,43 +454,52 @@ struct drm_sched_backend_ops {* @timedout_job: Called when a job has taken too long to execute, * to trigger GPU recovery. * -* This method is called in a workqueue context. +* @sched_job: The job that has timed out * -* Drivers typically issue a reset to recover from GPU hangs, and this -* procedure usually follows the following workflow: +* Drivers typically issue a reset to recover from GPU hangs. +* This procedure looks very different depending on whether a firmware +* or a hardware scheduler is being used. * -* 1. Stop the scheduler using drm_sched_stop(). This will park the -* scheduler thread and cancel the timeout work, guaranteeing that -* nothing is queued while we reset the hardware queue -* 2. Try to gracefully stop non-faulty jobs (optional) -* 3. Issue a GPU reset (driver-specific) -* 4. Re-submit jobs using drm_sched_resubmit_jobs() -* 5. Restart the scheduler using drm_sched_start(). At that point, new -* jobs can be queued, and the scheduler thread is unblocked +* For a FIRMWARE SCHEDULER, each ring has one scheduler, and each +* scheduler has one entity. Hence, the steps taken typically look as +* follows: +* +* 1. Stop the scheduler using drm_sched_stop(). This will pause the +* scheduler workqueues and cancel the timeout work, guaranteeing +* that nothing is queued while the ring is being removed. +* 2. Remove the ring. The firmware will make sure that the +* corresponding parts of the hardware are resetted, and that other +* rings are not impacted. +* 3. Kill the entity and the associated scheduler. +* +* +* For a HARDWARE SCHEDULER, a scheduler instance schedules jobs from +* one or more entities to one ring. This implies that all entities +* associated with the affected scheduler cannot be torn down, because +* this would effectively also affect innocent userspace processes which +* did not submit faulty jobs (for example). +* +* Consequently, the procedure to recover with a hardware scheduler +* should look like this: +* +* 1. Stop all schedulers impacted by the reset using drm_sched_stop(). +* 2. Kill the entity the faulty job stems from. +* 3. Issue a GPU reset on all faulty rings (driver-specific). +* 4. Re-submit jobs on all schedulers impacted by re-submitting them to +* the entities which are still alive. +* 5. Restart all schedulers that were stopped in step #1 using +* drm_sched_start(). * * Note that some GPUs have distinct hardware queues but need to reset * the GPU globally, which requires extra synchronization between the -* timeout handler of the different &drm_gpu_scheduler. One way to -* achieve this synchronization is to create an ordered workqueue -* (using alloc_ordered_workqueue()) at the driver level, and pass this -* queue to drm_sched_init(), to guarantee that timeout handlers are -* executed sequentially. The above workflow needs to be slightly -* adjusted in that case: +* timeout handlers of different schedulers. One way to achieve this +* synchronization is to create an ordered workqueue (using +* alloc_ordered_workqueue()) at the driver level, and pass this queue +* as drm_sched_init()'s @timeout_wq parameter. This will guarantee +* that timeout handlers are executed sequentially. * -* 1. Stop all schedulers impacted by the reset using drm_sched_stop() -* 2. Try to gracefully stop non-faulty jobs on all queues impacted by -* the reset (optional) -* 3. Issue a GPU reset on all faulty queues (driver-specific) -* 4. Re-submit jobs on all schedulers impacted by the reset using -* drm_sched_resubmit_jobs() -* 5. Restart all schedulers that were stopped in step #1 using -* drm_sched_start() +* Return: The scheduler's status, defined by &enum drm_gpu_sched_stat * -* Return DRM_GPU_SCHED_STAT_NOMINAL, when all is normal, -* and the underlying driver has started or completed recovery. -* -* Return DRM_GPU_SCHED_STAT_ENODEV, if the device is no longer -* available, i.e. has been unplugged. */ enum drm_gpu_sched_stat (*timedout_job)(struct drm_sched_job *sched_job);
Signature · 1 line
2.48.1
Matthew Brost
maintainerRe: [PATCH v7 3/3] drm/sched: Update timedout_job()'s documentation
Quoted 10 lines · Philipp Stanner
drm_sched_backend_ops.timedout_job()'s documentation is outdated. It mentions the deprecated function
drm_sched_resubmit_jobs(). Furthermore, it does not point out the important distinction between hardware and firmware schedulers.Since firmware schedulers typically only use one entity per scheduler, timeout handling is significantly more simple because the entity the faulted job came from can just be killed without affecting innocent processes.
Quoted 5 lines
Update the documentation with that distinction and other details.
Reformat the docstring to work to a unified style with the other handles.
Looks really good, one suggestion.
Quoted 48 lines
Signed-off-by Philipp Stanner <[email protected]>--- include/drm/gpu_scheduler.h | 78 ++++++++++++++++++++++--------------- 1 file changed, 47 insertions(+), 31 deletions(-)include/drm/gpu_scheduler.h +13
-12@@ -383,8 +383,15 @@ struct drm_sched_job {struct xarray dependencies; }; +/** +* enum drm_gpu_sched_stat - the scheduler's status +* +* @DRM_GPU_SCHED_STAT_NONE: Reserved. Do not use. +* @DRM_GPU_SCHED_STAT_NOMINAL: Operation succeeded. +* @DRM_GPU_SCHED_STAT_ENODEV: Error: Device is not available anymore. +*/ enum drm_gpu_sched_stat { -DRM_GPU_SCHED_STAT_NONE ,/* Reserve 0 */ +DRM_GPU_SCHED_STAT_NONE ,DRM_GPU_SCHED_STAT_NOMINAL ,DRM_GPU_SCHED_STAT_ENODEV , };@@ -447,43 +454,52 @@ struct drm_sched_backend_ops {* @timedout_job: Called when a job has taken too long to execute, * to trigger GPU recovery. * -* This method is called in a workqueue context. +* @sched_job: The job that has timed out * -* Drivers typically issue a reset to recover from GPU hangs, and this -* procedure usually follows the following workflow: +* Drivers typically issue a reset to recover from GPU hangs. +* This procedure looks very different depending on whether a firmware +* or a hardware scheduler is being used. * -* 1. Stop the scheduler using drm_sched_stop(). This will park the -* scheduler thread and cancel the timeout work, guaranteeing that -* nothing is queued while we reset the hardware queue -* 2. Try to gracefully stop non-faulty jobs (optional) -* 3. Issue a GPU reset (driver-specific) -* 4. Re-submit jobs using drm_sched_resubmit_jobs() -* 5. Restart the scheduler using drm_sched_start(). At that point, new -* jobs can be queued, and the scheduler thread is unblocked +* For a FIRMWARE SCHEDULER, each ring has one scheduler, and each
include/drm/gpu_scheduler.h struct drm_sched_backend_ops { · line 473
Quoted 10 lines
include/drm/gpu_scheduler.h +10
-0+* scheduler has one entity. Hence, the steps taken typically look as +* follows: +* +* 1. Stop the scheduler using drm_sched_stop(). This will pause the +* scheduler workqueues and cancel the timeout work, guaranteeing +* that nothing is queued while the ring is being removed. +* 2. Remove the ring. The firmware will make sure that the +* corresponding parts of the hardware are resetted, and that other +* rings are not impacted. +* 3. Kill the entity and the associated scheduler.
Xe doesn't do step 3.
It does:
- Ban entity / scheduler so futures submissions are a NOP. This would be submissions with unmet dependencies. Submission at the IOCTL are disallowed
- Signal all job's fences on the pending list
- Restart scheduler so free_job() is naturally called
I'm unsure if this how other firmware schedulers do this, but it seems to work quite well in Xe.
Matt
Quoted 54 lines
include/drm/gpu_scheduler.h +24
-19+* +* +* For a HARDWARE SCHEDULER, a scheduler instance schedules jobs from +* one or more entities to one ring. This implies that all entities +* associated with the affected scheduler cannot be torn down, because +* this would effectively also affect innocent userspace processes which +* did not submit faulty jobs (for example). +* +* Consequently, the procedure to recover with a hardware scheduler +* should look like this: +* +* 1. Stop all schedulers impacted by the reset using drm_sched_stop(). +* 2. Kill the entity the faulty job stems from. +* 3. Issue a GPU reset on all faulty rings (driver-specific). +* 4. Re-submit jobs on all schedulers impacted by re-submitting them to +* the entities which are still alive. +* 5. Restart all schedulers that were stopped in step #1 using +* drm_sched_start(). * * Note that some GPUs have distinct hardware queues but need to reset * the GPU globally, which requires extra synchronization between the -* timeout handler of the different &drm_gpu_scheduler. One way to -* achieve this synchronization is to create an ordered workqueue -* (using alloc_ordered_workqueue()) at the driver level, and pass this -* queue to drm_sched_init(), to guarantee that timeout handlers are -* executed sequentially. The above workflow needs to be slightly -* adjusted in that case: +* timeout handlers of different schedulers. One way to achieve this +* synchronization is to create an ordered workqueue (using +* alloc_ordered_workqueue()) at the driver level, and pass this queue +* as drm_sched_init()'s @timeout_wq parameter. This will guarantee +* that timeout handlers are executed sequentially. * -* 1. Stop all schedulers impacted by the reset using drm_sched_stop() -* 2. Try to gracefully stop non-faulty jobs on all queues impacted by -* the reset (optional) -* 3. Issue a GPU reset on all faulty queues (driver-specific) -* 4. Re-submit jobs on all schedulers impacted by the reset using -* drm_sched_resubmit_jobs() -* 5. Restart all schedulers that were stopped in step #1 using -* drm_sched_start() +* Return: The scheduler's status, defined by &enum drm_gpu_sched_stat * -* Return DRM_GPU_SCHED_STAT_NOMINAL, when all is normal, -* and the underlying driver has started or completed recovery. -* -* Return DRM_GPU_SCHED_STAT_ENODEV, if the device is no longer -* available, i.e. has been unplugged. */ enum drm_gpu_sched_stat (*timedout_job)(struct drm_sched_job *sched_job);Signature · 1 line
2.48.1
Re: [PATCH v7 3/3] drm/sched: Update timedout_job()'s documentation
Quoted 16 lines · Matthew Brost
Quoted 15 lines · Philipp Stanner
drm_sched_backend_ops.timedout_job()'s documentation is outdated. It
mentions the deprecated functiondrm_sched_resubmit_jobs(). Furthermore,
it does not point out the important distinction between hardware and
firmware schedulers.Since firmware schedulers typically only use one entity per scheduler,
timeout handling is significantly more simple because the entity the
faulted job came from can just be killed without affecting innocent processes.
Quoted 7 lines
Quoted 5 lines
Update the documentation with that distinction and other details.
Reformat the docstring to work to a unified style with the other handles.
Looks really good, one suggestion.
Already merged. But I'm working already on the TODO and could address your feedback in that followup.
Of course, would also be great if you could provide a proposal in a patch? :)
Quoted 88 lines
Quoted 75 lines
Signed-off-by Philipp Stanner <[email protected]>---
include/drm/gpu_scheduler.h | 78 ++++++++++++++++++++++-----------
----1 file changed, 47 insertions(+), 31 deletions(-)include/drm/gpu_scheduler.h +0
-0@@ -383,8 +383,15 @@ struct drm_sched_job { struct xarray dependencies; };
+/**
+ * enumdrm_gpu_sched_stat- the scheduler's status
+ *
+ * @DRM_GPU_SCHED_STAT_NONE: Reserved. Do not use.
+ * @DRM_GPU_SCHED_STAT_NOMINAL: Operation succeeded.
+ * @DRM_GPU_SCHED_STAT_ENODEV: Error: Device is not available anymore.
+ */
enumdrm_gpu_sched_stat{include/drm/gpu_scheduler.h +1
-1- DRM_GPU_SCHED_STAT_NONE, /* Reserve 0 */ + DRM_GPU_SCHED_STAT_NONE,
DRM_GPU_SCHED_STAT_NOMINAL,
DRM_GPU_SCHED_STAT_ENODEV,
};include/drm/gpu_scheduler.h +1
-2@@ -447,43 +454,52 @@ struct drm_sched_backend_ops { * @timedout_job: Called when a job has taken too long to execute, * to trigger GPU recovery. * - * This method is called in a workqueue context. + * @sched_job: The job that has timed out * - * Drivers typically issue a reset to recover from GPUhangs, and this
include/drm/gpu_scheduler.h +1
-1-* procedure usually follows the following workflow: +* Drivers typically issue a reset to recover from GPU hangs.
include/drm/gpu_scheduler.h +1
-0+* This procedure looks very different depending on whether a firmware
include/drm/gpu_scheduler.h +1
-0+* or a hardware scheduler is being used. *
include/drm/gpu_scheduler.h +0
-1-* 1. Stop the scheduler using drm_sched_stop(). This will park the
include/drm/gpu_scheduler.h +0
-1- * scheduler thread and cancel the timeout work,guaranteeing that
include/drm/gpu_scheduler.h +0
-5- * nothing is queued while we reset the hardware queue - * 2. Try to gracefully stop non-faulty jobs (optional) - * 3. Issue a GPU reset (driver-specific) - * 4. Re-submit jobs using drm_sched_resubmit_jobs() - * 5. Restart the scheduler using drm_sched_start(). Atthat point, new
include/drm/gpu_scheduler.h +0
-1- * jobs can be queued, and the scheduler thread isunblocked
include/drm/gpu_scheduler.h +1
-0+* For a FIRMWARE SCHEDULER, each ring has one scheduler, and each
include/drm/gpu_scheduler.h +1
-0+* scheduler has one entity. Hence, the steps taken typically look as
include/drm/gpu_scheduler.h +3
-0+* follows: +* +* 1. Stop the scheduler using drm_sched_stop(). This will pause the
include/drm/gpu_scheduler.h +1
-0+ * scheduler workqueues and cancel the timeout work,guaranteeing
include/drm/gpu_scheduler.h +1
-0+ * that nothing is queued while the ring is beingremoved.
include/drm/gpu_scheduler.h +1
-0+* 2. Remove the ring. The firmware will make sure that the
include/drm/gpu_scheduler.h +1
-0+ * corresponding parts of the hardware are resetted,and that other
include/drm/gpu_scheduler.h struct drm_sched_backend_ops { · line 473
Quoted 2 lines
include/drm/gpu_scheduler.h +2
-0+ * rings are not impacted. + * 3. Kill the entity and the associated scheduler.Xe doesn't do step 3.
It does:
- Ban entity / scheduler so futures submissions are a NOP. This would be
submissions with unmet dependencies. Submission at the IOCTL are disallowed
- Signal all job's fences on the pending list
- Restart scheduler sofree_job()is naturally called
Quoted 3 lines
I'm unsure if this how other firmware schedulers do this, but it seems
to work quite well in Xe.
Alright, so if I interpret this correctly you do that to avoid our infamous memory leaks. That makes sense.
The memory leaks are documented in drm_sched_fini()'s docu, but it could make sense to mention them here, too.
… thinking about it, we probably actually have to rephrase this line. Just tearing down entity & sched makes those leaks very likely. Argh.
Nouveau, also a firmware scheduler, has effectively a copy of the pending_list and also ensures that all fences get signalled. Only once that copy of the pending list is empty it calls into drm_sched_fini(). Take a look at nouveau_sched.c if you want, the code is quite straightforward.
P.
Quoted 86 lines
Matt
Quoted 83 lines
include/drm/gpu_scheduler.h +3
-0+* +* +* For a HARDWARE SCHEDULER, a scheduler instance schedules jobs from
include/drm/gpu_scheduler.h +1
-0+* one or more entities to one ring. This implies that all entities
include/drm/gpu_scheduler.h +1
-0+* associated with the affected scheduler cannot be torn down, because
include/drm/gpu_scheduler.h +1
-0+* this would effectively also affect innocent userspace processes which
include/drm/gpu_scheduler.h +3
-0+* did not submit faulty jobs (for example). +* +* Consequently, the procedure to recover with a hardware scheduler
include/drm/gpu_scheduler.h +3
-0+* should look like this: +* +* 1. Stop all schedulers impacted by the reset using
drm_sched_stop().include/drm/gpu_scheduler.h +2
-0+* 2. Kill the entity the faulty job stems from. +* 3. Issue a GPU reset on all faulty rings (driver- specific).
include/drm/gpu_scheduler.h +1
-0+* 4. Re-submit jobs on all schedulers impacted by re- submitting them to
include/drm/gpu_scheduler.h +2
-0+ * the entities which are still alive. + * 5. Restart all schedulers that were stopped in step #1using
include/drm/gpu_scheduler.h +1
-0+ * drm_sched_start().*
* Note that some GPUs have distinct hardware queues but need to reset
* the GPU globally, which requires extra synchronization between theinclude/drm/gpu_scheduler.h +0
-1-* timeout handler of the different &drm_gpu_scheduler. One way to
include/drm/gpu_scheduler.h +0
-1-* achieve this synchronization is to create an ordered workqueue
include/drm/gpu_scheduler.h +0
-1-* (using alloc_ordered_workqueue()) at the driver level, and pass this
include/drm/gpu_scheduler.h +0
-1-* queue to drm_sched_init(), to guarantee that timeout handlers are
include/drm/gpu_scheduler.h +0
-1-* executed sequentially. The above workflow needs to be slightly
include/drm/gpu_scheduler.h +1
-1-* adjusted in that case: +* timeout handlers of different schedulers. One way to achieve this
include/drm/gpu_scheduler.h +1
-0+* synchronization is to create an ordered workqueue (using
include/drm/gpu_scheduler.h +1
-0+* alloc_ordered_workqueue()) at the driver level, and pass this queue
include/drm/gpu_scheduler.h +1
-0+* as drm_sched_init()'s @timeout_wq parameter. This will guarantee
include/drm/gpu_scheduler.h +1
-0+* that timeout handlers are executed sequentially. *
include/drm/gpu_scheduler.h +0
-1-* 1. Stop all schedulers impacted by the reset using
drm_sched_stop()include/drm/gpu_scheduler.h +0
-1-* 2. Try to gracefully stop non-faulty jobs on all queues impacted by
include/drm/gpu_scheduler.h +0
-2- * the reset (optional) - * 3. Issue a GPU reset on all faulty queues (driver-specific)
include/drm/gpu_scheduler.h +0
-1-* 4. Re-submit jobs on all schedulers impacted by the reset using
include/drm/gpu_scheduler.h +0
-2- * drm_sched_resubmit_jobs() - * 5. Restart all schedulers that were stopped in step #1using
include/drm/gpu_scheduler.h +1
-1- * drm_sched_start() +* Return: The scheduler's status, defined by &enum
drm_gpu_sched_stat
*include/drm/gpu_scheduler.h +0
-2-* Return DRM_GPU_SCHED_STAT_NOMINAL, when all is normal, -* and the underlying driver has started or completed recovery.
include/drm/gpu_scheduler.h +0
-2-* -* Return DRM_GPU_SCHED_STAT_ENODEV, if the device is no longer
include/drm/gpu_scheduler.h +0
-1-* available, i.e. has been unplugged. */
enumdrm_gpu_sched_stat(*timedout_job)(structdrm_sched_job*sched_job);Signature · 1 line
2.48.1
Matthew Brost
maintainerRe: [PATCH v7 3/3] drm/sched: Update timedout_job()'s documentation
Quoted 23 lines · Philipp Stanner
Quoted 22 lines · Matthew Brost
Quoted 20 lines · Philipp Stanner
drm_sched_backend_ops.timedout_job()'s documentation is outdated. It
mentions the deprecated functiondrm_sched_resubmit_jobs(). Furthermore,
it does not point out the important distinction between hardware and
firmware schedulers.Since firmware schedulers typically only use one entity per scheduler,
timeout handling is significantly more simple because the entity the
faulted job came from can just be killed without affecting innocent processes.Update the documentation with that distinction and other details.
Reformat the docstring to work to a unified style with the other handles.
Quoted 8 lines
Quoted 1 line
Looks really good, one suggestion.
Already merged. But I'm working already on the TODO and could address your feedback in that followup.
Of course, would also be great if you could provide a proposal in a patch? :)
I can post something. Let me try to get something out today.
Matt
Quoted 197 lines
Quoted 89 lines
Quoted 76 lines
Signed-off-by Philipp Stanner <[email protected]>---
include/drm/gpu_scheduler.h | 78 ++++++++++++++++++++++-----------
----1 file changed, 47 insertions(+), 31 deletions(-)include/drm/gpu_scheduler.h +0
-0@@ -383,8 +383,15 @@ struct drm_sched_job { struct xarray dependencies; };
+/**
+ * enumdrm_gpu_sched_stat- the scheduler's status
+ *
+ * @DRM_GPU_SCHED_STAT_NONE: Reserved. Do not use.
+ * @DRM_GPU_SCHED_STAT_NOMINAL: Operation succeeded.
+ * @DRM_GPU_SCHED_STAT_ENODEV: Error: Device is not available anymore.
+ */
enumdrm_gpu_sched_stat{include/drm/gpu_scheduler.h +1
-1- DRM_GPU_SCHED_STAT_NONE, /* Reserve 0 */ + DRM_GPU_SCHED_STAT_NONE,
DRM_GPU_SCHED_STAT_NOMINAL,
DRM_GPU_SCHED_STAT_ENODEV,
};include/drm/gpu_scheduler.h +1
-2@@ -447,43 +454,52 @@ struct drm_sched_backend_ops { * @timedout_job: Called when a job has taken too long to execute, * to trigger GPU recovery. * - * This method is called in a workqueue context. + * @sched_job: The job that has timed out * - * Drivers typically issue a reset to recover from GPUhangs, and this
include/drm/gpu_scheduler.h +1
-1-* procedure usually follows the following workflow: +* Drivers typically issue a reset to recover from GPU hangs.
include/drm/gpu_scheduler.h +1
-0+* This procedure looks very different depending on whether a firmware
include/drm/gpu_scheduler.h +1
-0+* or a hardware scheduler is being used. *
include/drm/gpu_scheduler.h +0
-1-* 1. Stop the scheduler using drm_sched_stop(). This will park the
include/drm/gpu_scheduler.h +0
-1- * scheduler thread and cancel the timeout work,guaranteeing that
include/drm/gpu_scheduler.h +0
-5- * nothing is queued while we reset the hardware queue - * 2. Try to gracefully stop non-faulty jobs (optional) - * 3. Issue a GPU reset (driver-specific) - * 4. Re-submit jobs using drm_sched_resubmit_jobs() - * 5. Restart the scheduler using drm_sched_start(). Atthat point, new
include/drm/gpu_scheduler.h +0
-1- * jobs can be queued, and the scheduler thread isunblocked
include/drm/gpu_scheduler.h +1
-0+* For a FIRMWARE SCHEDULER, each ring has one scheduler, and each
include/drm/gpu_scheduler.h +1
-0+* scheduler has one entity. Hence, the steps taken typically look as
include/drm/gpu_scheduler.h +3
-0+* follows: +* +* 1. Stop the scheduler using drm_sched_stop(). This will pause the
include/drm/gpu_scheduler.h +1
-0+ * scheduler workqueues and cancel the timeout work,guaranteeing
include/drm/gpu_scheduler.h +1
-0+ * that nothing is queued while the ring is beingremoved.
include/drm/gpu_scheduler.h +1
-0+* 2. Remove the ring. The firmware will make sure that the
include/drm/gpu_scheduler.h +1
-0+ * corresponding parts of the hardware are resetted,and that other
include/drm/gpu_scheduler.h struct drm_sched_backend_ops { · line 473
Quoted 2 lines
include/drm/gpu_scheduler.h +2
-0+ * rings are not impacted. + * 3. Kill the entity and the associated scheduler.Xe doesn't do step 3.
It does:
- Ban entity / scheduler so futures submissions are a NOP. This would be
submissions with unmet dependencies. Submission at the IOCTL are disallowed
- Signal all job's fences on the pending list
- Restart scheduler sofree_job()is naturally calledQuoted 3 lines
I'm unsure if this how other firmware schedulers do this, but it seems
to work quite well in Xe.Alright, so if I interpret this correctly you do that to avoid our infamous memory leaks. That makes sense.
The memory leaks are documented in drm_sched_fini()'s docu, but it could make sense to mention them here, too.
… thinking about it, we probably actually have to rephrase this line. Just tearing down entity & sched makes those leaks very likely. Argh.
Nouveau, also a firmware scheduler, has effectively a copy of the
pending_listand also ensures that all fences get signalled. Only once that copy of the pending list is empty it calls intodrm_sched_fini(). Take a look atnouveau_sched.cif you want, the code is quite straightforward.P.
Quoted 86 lines
Matt
Quoted 83 lines
include/drm/gpu_scheduler.h +3
-0+* +* +* For a HARDWARE SCHEDULER, a scheduler instance schedules jobs from
include/drm/gpu_scheduler.h +1
-0+* one or more entities to one ring. This implies that all entities
include/drm/gpu_scheduler.h +1
-0+* associated with the affected scheduler cannot be torn down, because
include/drm/gpu_scheduler.h +1
-0+* this would effectively also affect innocent userspace processes which
include/drm/gpu_scheduler.h +3
-0+* did not submit faulty jobs (for example). +* +* Consequently, the procedure to recover with a hardware scheduler
include/drm/gpu_scheduler.h +3
-0+* should look like this: +* +* 1. Stop all schedulers impacted by the reset using
drm_sched_stop().include/drm/gpu_scheduler.h +2
-0+* 2. Kill the entity the faulty job stems from. +* 3. Issue a GPU reset on all faulty rings (driver- specific).
include/drm/gpu_scheduler.h +1
-0+* 4. Re-submit jobs on all schedulers impacted by re- submitting them to
include/drm/gpu_scheduler.h +2
-0+ * the entities which are still alive. + * 5. Restart all schedulers that were stopped in step #1using
include/drm/gpu_scheduler.h +1
-0+ * drm_sched_start().*
* Note that some GPUs have distinct hardware queues but need to reset
* the GPU globally, which requires extra synchronization between theinclude/drm/gpu_scheduler.h +0
-1-* timeout handler of the different &drm_gpu_scheduler. One way to
include/drm/gpu_scheduler.h +0
-1-* achieve this synchronization is to create an ordered workqueue
include/drm/gpu_scheduler.h +0
-1-* (using alloc_ordered_workqueue()) at the driver level, and pass this
include/drm/gpu_scheduler.h +0
-1-* queue to drm_sched_init(), to guarantee that timeout handlers are
include/drm/gpu_scheduler.h +0
-1-* executed sequentially. The above workflow needs to be slightly
include/drm/gpu_scheduler.h +1
-1-* adjusted in that case: +* timeout handlers of different schedulers. One way to achieve this
include/drm/gpu_scheduler.h +1
-0+* synchronization is to create an ordered workqueue (using
include/drm/gpu_scheduler.h +1
-0+* alloc_ordered_workqueue()) at the driver level, and pass this queue
include/drm/gpu_scheduler.h +1
-0+* as drm_sched_init()'s @timeout_wq parameter. This will guarantee
include/drm/gpu_scheduler.h +1
-0+* that timeout handlers are executed sequentially. *
include/drm/gpu_scheduler.h +0
-1-* 1. Stop all schedulers impacted by the reset using
drm_sched_stop()include/drm/gpu_scheduler.h +0
-1-* 2. Try to gracefully stop non-faulty jobs on all queues impacted by
include/drm/gpu_scheduler.h +0
-2- * the reset (optional) - * 3. Issue a GPU reset on all faulty queues (driver-specific)
include/drm/gpu_scheduler.h +0
-1-* 4. Re-submit jobs on all schedulers impacted by the reset using
include/drm/gpu_scheduler.h +0
-2- * drm_sched_resubmit_jobs() - * 5. Restart all schedulers that were stopped in step #1using
include/drm/gpu_scheduler.h +1
-1- * drm_sched_start() +* Return: The scheduler's status, defined by &enum
drm_gpu_sched_stat
*include/drm/gpu_scheduler.h +0
-2-* Return DRM_GPU_SCHED_STAT_NOMINAL, when all is normal, -* and the underlying driver has started or completed recovery.
include/drm/gpu_scheduler.h +0
-2-* -* Return DRM_GPU_SCHED_STAT_ENODEV, if the device is no longer
include/drm/gpu_scheduler.h +0
-1-* available, i.e. has been unplugged. */
enumdrm_gpu_sched_stat(*timedout_job)(structdrm_sched_job*sched_job);Signature · 1 line
2.48.1
Matthew Brost
maintainerRe: [PATCH v7 3/3] drm/sched: Update timedout_job()'s documentation
In reply to Philipp StannerQuoted 23 lines · Philipp Stanner
Quoted 22 lines · Matthew Brost
Quoted 20 lines · Philipp Stanner
drm_sched_backend_ops.timedout_job()'s documentation is outdated. It
mentions the deprecated functiondrm_sched_resubmit_jobs(). Furthermore,
it does not point out the important distinction between hardware and
firmware schedulers.Since firmware schedulers typically only use one entity per scheduler,
timeout handling is significantly more simple because the entity the
faulted job came from can just be killed without affecting innocent processes.Update the documentation with that distinction and other details.
Reformat the docstring to work to a unified style with the other handles.
Quoted 99 lines
Quoted 1 line
Looks really good, one suggestion.
Already merged. But I'm working already on the TODO and could address your feedback in that followup.
Of course, would also be great if you could provide a proposal in a patch? :)
Quoted 91 lines
Quoted 75 lines
Signed-off-by Philipp Stanner <[email protected]>---
include/drm/gpu_scheduler.h | 78 ++++++++++++++++++++++-----------
----1 file changed, 47 insertions(+), 31 deletions(-)include/drm/gpu_scheduler.h +0
-0@@ -383,8 +383,15 @@ struct drm_sched_job { struct xarray dependencies; };
+/**
+ * enumdrm_gpu_sched_stat- the scheduler's status
+ *
+ * @DRM_GPU_SCHED_STAT_NONE: Reserved. Do not use.
+ * @DRM_GPU_SCHED_STAT_NOMINAL: Operation succeeded.
+ * @DRM_GPU_SCHED_STAT_ENODEV: Error: Device is not available anymore.
+ */
enumdrm_gpu_sched_stat{include/drm/gpu_scheduler.h +1
-1- DRM_GPU_SCHED_STAT_NONE, /* Reserve 0 */ + DRM_GPU_SCHED_STAT_NONE,
DRM_GPU_SCHED_STAT_NOMINAL,
DRM_GPU_SCHED_STAT_ENODEV,
};include/drm/gpu_scheduler.h +1
-2@@ -447,43 +454,52 @@ struct drm_sched_backend_ops { * @timedout_job: Called when a job has taken too long to execute, * to trigger GPU recovery. * - * This method is called in a workqueue context. + * @sched_job: The job that has timed out * - * Drivers typically issue a reset to recover from GPUhangs, and this
include/drm/gpu_scheduler.h +1
-1-* procedure usually follows the following workflow: +* Drivers typically issue a reset to recover from GPU hangs.
include/drm/gpu_scheduler.h +1
-0+* This procedure looks very different depending on whether a firmware
include/drm/gpu_scheduler.h +1
-0+* or a hardware scheduler is being used. *
include/drm/gpu_scheduler.h +0
-1-* 1. Stop the scheduler using drm_sched_stop(). This will park the
include/drm/gpu_scheduler.h +0
-1- * scheduler thread and cancel the timeout work,guaranteeing that
include/drm/gpu_scheduler.h +0
-5- * nothing is queued while we reset the hardware queue - * 2. Try to gracefully stop non-faulty jobs (optional) - * 3. Issue a GPU reset (driver-specific) - * 4. Re-submit jobs using drm_sched_resubmit_jobs() - * 5. Restart the scheduler using drm_sched_start(). Atthat point, new
include/drm/gpu_scheduler.h +0
-1- * jobs can be queued, and the scheduler thread isunblocked
include/drm/gpu_scheduler.h +1
-0+* For a FIRMWARE SCHEDULER, each ring has one scheduler, and each
include/drm/gpu_scheduler.h +1
-0+* scheduler has one entity. Hence, the steps taken typically look as
include/drm/gpu_scheduler.h +3
-0+* follows: +* +* 1. Stop the scheduler using drm_sched_stop(). This will pause the
include/drm/gpu_scheduler.h +1
-0+ * scheduler workqueues and cancel the timeout work,guaranteeing
include/drm/gpu_scheduler.h +1
-0+ * that nothing is queued while the ring is beingremoved.
include/drm/gpu_scheduler.h +1
-0+* 2. Remove the ring. The firmware will make sure that the
include/drm/gpu_scheduler.h +1
-0+ * corresponding parts of the hardware are resetted,and that other
include/drm/gpu_scheduler.h struct drm_sched_backend_ops { · line 473
Quoted 2 lines
include/drm/gpu_scheduler.h +2
-0+ * rings are not impacted. + * 3. Kill the entity and the associated scheduler.Xe doesn't do step 3.
It does:
- Ban entity / scheduler so futures submissions are a NOP. This would be
submissions with unmet dependencies. Submission at the IOCTL are disallowed
- Signal all job's fences on the pending list
- Restart scheduler sofree_job()is naturally calledI'm unsure if this how other firmware schedulers do this, but it seems
to work quite well in Xe.
Missed this part of the reply.
Quoted 4 lines
Alright, so if I interpret this correctly you do that to avoid our infamous memory leaks. That makes sense.
Yes.
Quoted 3 lines
The memory leaks are documented in drm_sched_fini()'s docu, but it could make sense to mention them here, too.
The jobs in Xe ref count the scheduler so we never call drm_sched_fini until jobs in the pending list and dependency queues has made called free_job().
Quoted 9 lines
… thinking about it, we probably actually have to rephrase this line. Just tearing down entity & sched makes those leaks very likely. Argh.
Nouveau, also a firmware scheduler, has effectively a copy of the
pending_listand also ensures that all fences get signalled. Only once that copy of the pending list is empty it calls intodrm_sched_fini(). Take a look atnouveau_sched.cif you want, the code is quite straightforward.
Same idea in Xe I think we just directly access the pending access list. Let me look at what Nouveau is doing before posting an updated doc here patch.
Matt
Quoted 89 lines
P.
Quoted 86 lines
Matt
Quoted 83 lines
include/drm/gpu_scheduler.h +3
-0+* +* +* For a HARDWARE SCHEDULER, a scheduler instance schedules jobs from
include/drm/gpu_scheduler.h +1
-0+* one or more entities to one ring. This implies that all entities
include/drm/gpu_scheduler.h +1
-0+* associated with the affected scheduler cannot be torn down, because
include/drm/gpu_scheduler.h +1
-0+* this would effectively also affect innocent userspace processes which
include/drm/gpu_scheduler.h +3
-0+* did not submit faulty jobs (for example). +* +* Consequently, the procedure to recover with a hardware scheduler
include/drm/gpu_scheduler.h +3
-0+* should look like this: +* +* 1. Stop all schedulers impacted by the reset using
drm_sched_stop().include/drm/gpu_scheduler.h +2
-0+* 2. Kill the entity the faulty job stems from. +* 3. Issue a GPU reset on all faulty rings (driver- specific).
include/drm/gpu_scheduler.h +1
-0+* 4. Re-submit jobs on all schedulers impacted by re- submitting them to
include/drm/gpu_scheduler.h +2
-0+ * the entities which are still alive. + * 5. Restart all schedulers that were stopped in step #1using
include/drm/gpu_scheduler.h +1
-0+ * drm_sched_start().*
* Note that some GPUs have distinct hardware queues but need to reset
* the GPU globally, which requires extra synchronization between theinclude/drm/gpu_scheduler.h +0
-1-* timeout handler of the different &drm_gpu_scheduler. One way to
include/drm/gpu_scheduler.h +0
-1-* achieve this synchronization is to create an ordered workqueue
include/drm/gpu_scheduler.h +0
-1-* (using alloc_ordered_workqueue()) at the driver level, and pass this
include/drm/gpu_scheduler.h +0
-1-* queue to drm_sched_init(), to guarantee that timeout handlers are
include/drm/gpu_scheduler.h +0
-1-* executed sequentially. The above workflow needs to be slightly
include/drm/gpu_scheduler.h +1
-1-* adjusted in that case: +* timeout handlers of different schedulers. One way to achieve this
include/drm/gpu_scheduler.h +1
-0+* synchronization is to create an ordered workqueue (using
include/drm/gpu_scheduler.h +1
-0+* alloc_ordered_workqueue()) at the driver level, and pass this queue
include/drm/gpu_scheduler.h +1
-0+* as drm_sched_init()'s @timeout_wq parameter. This will guarantee
include/drm/gpu_scheduler.h +1
-0+* that timeout handlers are executed sequentially. *
include/drm/gpu_scheduler.h +0
-1-* 1. Stop all schedulers impacted by the reset using
drm_sched_stop()include/drm/gpu_scheduler.h +0
-1-* 2. Try to gracefully stop non-faulty jobs on all queues impacted by
include/drm/gpu_scheduler.h +0
-2- * the reset (optional) - * 3. Issue a GPU reset on all faulty queues (driver-specific)
include/drm/gpu_scheduler.h +0
-1-* 4. Re-submit jobs on all schedulers impacted by the reset using
include/drm/gpu_scheduler.h +0
-2- * drm_sched_resubmit_jobs() - * 5. Restart all schedulers that were stopped in step #1using
include/drm/gpu_scheduler.h +1
-1- * drm_sched_start() +* Return: The scheduler's status, defined by &enum
drm_gpu_sched_stat
*include/drm/gpu_scheduler.h +0
-2-* Return DRM_GPU_SCHED_STAT_NOMINAL, when all is normal, -* and the underlying driver has started or completed recovery.
include/drm/gpu_scheduler.h +0
-2-* -* Return DRM_GPU_SCHED_STAT_ENODEV, if the device is no longer
include/drm/gpu_scheduler.h +0
-1-* available, i.e. has been unplugged. */
enumdrm_gpu_sched_stat(*timedout_job)(structdrm_sched_job*sched_job);Signature · 1 line
2.48.1
Quoted 4 lines · Philipp Stanner
Philipp Stanner (3):
drm/sched: Adjust outdated docu forrun_job()drm/sched: Documentrun_job()refcount hazard drm/sched: Update timedout_job()'s documentation
Philipp Stanner
AppliedQuoted 7 lines · Danilo Krummrich
Quoted 4 lines · Philipp Stanner
Philipp Stanner (3):
drm/sched: Adjust outdated docu forrun_job()drm/sched: Documentrun_job()refcount hazard drm/sched: Update timedout_job()'s documentationAcked-by Danilo Krummrich <[email protected]>
Applied to drm-misc-next.
Thanks