media: c8sectpfe: switch to using gpiod API

index c38b62d4f1ae..dd8141e0828d 100644
@@ -16,8 +16,10 @@
 #include <linux/dma-mapping.h>
 #include <linux/dvb/dmx.h>
 #include <linux/dvb/frontend.h>
+#include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>

@@ -812,30 +814,23 @@ static int c8sectpfe_probe(struct platform_device *pdev)
 		}
 		of_node_put(i2c_bus);
 
-		tsin->rst_gpio = of_get_named_gpio(child, "reset-gpios", 0);
-
-		ret = gpio_is_valid(tsin->rst_gpio);
-		if (!ret) {
-			dev_err(dev,
-				"reset gpio for tsin%d not valid (gpio=%d)\n",
-				tsin->tsin_id, tsin->rst_gpio);
-			ret = -EINVAL;
-			goto err_node_put;
-		}
-
-		ret = devm_gpio_request_one(dev, tsin->rst_gpio,
-					GPIOF_OUT_INIT_LOW, "NIM reset");
+		/* Acquire reset GPIO and activate it */
+		tsin->rst_gpio = devm_fwnode_gpiod_get(dev,
+						       of_fwnode_handle(child),
+						       "reset", GPIOD_OUT_HIGH,
+						       "NIM reset");
+		ret = PTR_ERR_OR_ZERO(tsin->rst_gpio);
 		if (ret && ret != -EBUSY) {
-			dev_err(dev, "Can't request tsin%d reset gpio\n"
-				, fei->channel_data[index]->tsin_id);
+			dev_err(dev, "Can't request tsin%d reset gpio\n",
+				fei->channel_data[index]->tsin_id);
 			goto err_node_put;
 		}
 
 		if (!ret) {
-			/* toggle reset lines */
-			gpio_direction_output(tsin->rst_gpio, 0);
+			/* wait for the chip to reset */
 			usleep_range(3500, 5000);
-			gpio_direction_output(tsin->rst_gpio, 1);
+			/* release the reset line */
+			gpiod_set_value_cansleep(tsin->rst_gpio, 0);
 			usleep_range(3000, 5000);
 		}
 

index c9d6021904cd..bf377cc82225 100644
@@ -16,6 +16,8 @@
 
 #define C8SECTPFE_MAX_TSIN_CHAN 8
 
+struct gpio_desc;
+
 struct channel_info {
 
 	int tsin_id;

@@ -25,7 +27,7 @@ struct channel_info {
 	int i2c;
 	int dvb_card;
 
-	int rst_gpio;
+	struct gpio_desc *rst_gpio;
 
 	struct i2c_adapter  *i2c_adapter;
 	struct i2c_adapter  *tuner_i2c;