btrfs: scrub: use a more reader friendly code to implement scrub_simple_mirror()
v5 cover btrfs: scrub: use a more reader friendly code to implement scrub_simple_mirror()
This series can be found in my github repo:
https://github.com/adam900710/linux/tree/scrub_stripe
It's recommended to fetch from the repo, as our misc-next seems to change pretty rapidly.
[Changelog]
v5:
- Fix a bug that unconditionally repairs a zoned block group Only trigger the repair if we had any initial read failure
Huge thanks to Johannes for the initial ZNS tests.
v4:
- Add a dedicated patch to add btrfs_bio::fs_info
Along with dedicated allocator for scrub btrfs bios.
The dedicated allocator is due to the fact that scrub and regular btrfs bios have very different mandatory members (fs_info vs inode + file_offset).
For now I believe a different allocator would be better.
- Some code style change
* No more single letter temporray structure copied from old scrub code
* Use "for (int i = 0; ...)" when possible
* Some new lines fixes
* Extra brackets for tenrary operators
* A new macro for (BTRFS_STRIPE_LEN >> PAGE_SHIFT)
* Use enum for scrub_stripe::state bit flags
* Use extra brackets for double shifting
* Use explicit != 0 or == 0 comparing memcmp() results
* Remove unnecessary ASSERT()s after btrfs_bio allocation
v3:
- Add a dedicated @fs_info member for btrfs_bio
Unfortunately although we have a 32 bytes hole between @end_io_work and @bio, compiler still choose not to use that hole for whatever reasons. Thus this would increase the size of btrfs_bio by 4 bytes.
- Rebased to lastest misc-next
- Fix various while space error not caught by btrfs-workflow
v2:
- Use batched scrub_stripe submission
This allows much better performance compared to the old scrub code
- Add scrub specific bio layer helpers
This makes the scrub code to be completely rely on logical bytenr + mirror_num.
[PROBLEMS OF OLD SCRUB]
- Too many delayed jumps, making it hard to read
Even starting from scrub_simple_mirror(), we have the following functions:
scrub_extent()
|
v
scrub_sectors()
|
v
scrub_add_sector_to_rd_bio()
| endio function
v
scrub_bio_end_io()
| delayed work
v
scrub_bio_end_io_worker()
|
v
scrub_block_complete()
|
v
scrub_handle_errored_blocks()
|
v
scrub_recheck_block()
|
v scrub_repair_sector_from_good_copy()
Not to mention the hidden jumps in certain branches.
- IOPS inefficient for fragmented extents
The real block size of scrub read is between 4K and 128K. If the extents are not adjacent, the blocksize drops to 4K and would be an IOPS disaster.
- All hardcoded to do the logical -> physical mapping by scrub itself No usage of any existing bio facilities.
And even implemented a RAID56 recovery wrapper.
[NEW SCRUB_STRIPE BASED SOLUTION]
- Overall streamlined code base
queue_scrub_stripe()
|
v
scrub_find_fill_first_stripe()
|
vdone
Or
queue_scrub_stripe()
|
v
flush_scrub_stripes()
|
v
scrub_submit_initial_read()
| endio function
v
scrub_read_endio()
| delayed work
v
scrub_stripe_read_repair_worker()
|
v
scrub_verify_one_stripe()
|
v
scrub_stripe_submit_repair_read()
|
v
scrub_write_sectors()
|
v scrub_stripe_report_errors()
Only one endio and delayed work, all other work are properly done in a sequential workflow.
- Always read in 64KiB block size
The real blocksize of read starts at 64KiB, and ends at 512K. This already results a better performance even for the worst case:
With patchset: 404.81MiB/s
Without patchset: 369.30MiB/s
Around 10% performance improvement on an SATA SSD.
- All logical bytenr/mirror_num based read and write
With the new single stripe fast path in btrfs_submit_bio(), scrub can reuse most of the bio layer code, result much simpler scrub code.
[TODO]
- More testing on zoned devices
Now the patchset can already pass all scrub/replace groups with regular devices.
- More cleanup on RAID56 path
Now RAID56 still uses some old facility, resulting things like scrub_sector and scrub_bio can not be fully cleaned up.
Qu Wenruo (13):
btrfs: scrub: use dedicated super block verification function to scrub
one super block
btrfs: introduce a new allocator for scrub specific btrfs_bio
btrfs: introduce a new helper to submit read bio for scrub
btrfs: introduce a new helper to submit write bio for scrub
btrfs: scrub: introduce the structure for new BTRFS_STRIPE_LEN based
interface
btrfs: scrub: introduce a helper to find and fill the sector info for
a scrub_stripe
btrfs: scrub: introduce a helper to verify one metadata
btrfs: scrub: introduce a helper to verify one scrub_stripe
btrfs: scrub: introduce the main read repair worker for scrub_stripe
btrfs: scrub: introduce a writeback helper for scrub_stripe
btrfs: scrub: introduce error reporting functionality for scrub_stripe
btrfs: scrub: introduce the helper to queue a stripe for scrub
btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe
infrastructure
fs/btrfs/bio.c | 165 ++++- fs/btrfs/bio.h | 22 +- fs/btrfs/file-item.c | 9 +- fs/btrfs/file-item.h | 3 +- fs/btrfs/raid56.c | 2 +- fs/btrfs/scrub.c | 1655 ++++++++++++++++++++++++++++++------------ 6 files changed, 1371 insertions(+), 485 deletions(-)
Signature · 1 line
2.39.2
PATCH v5 1/13 btrfs: scrub: use dedicated super block verification function to scrub one super block
There is really no need to go through the super complex scrub_sectors() to just handle super blocks.
This patch will introduce a dedicated function (less than 50 lines) to handle super block scrubing.
This new function will introduce a behavior change, instead of using the complex but concurrent scrub_bio system, here we just go submit-and-wait.
There is really not much sense to care the performance of super block scrubbing. It only has 3 super blocks at most, and they are all scattered around the devices already.
--- fs/btrfs/scrub.c | 54 +++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 46 insertions(+), 8 deletions(-)
fs/btrfs/scrub.c +46 -8
@@ -4243,18 +4243,59 @@ int scrub_enumerate_chunks(struct scrub_ctx *sctx,return ret; } +static int scrub_one_super (struct scrub_ctx *sctx,struct btrfs_device *dev, +struct page *page,u64 physical,u64 generation) +{ +struct btrfs_fs_info *fs_info = sctx->fs_info; +struct bio_vec bvec; +struct bio bio; +struct btrfs_super_block *sb =page_address (page); +int ret; + +bio_init (&bio, dev->bdev, &bvec,1 ,REQ_OP_READ ); + bio.bi_iter.bi_sector = physical >>SECTOR_SHIFT ; +bio_add_page (&bio, page,BTRFS_SUPER_INFO_SIZE ,0 ); + ret =submit_bio_wait (&bio); +bio_uninit (&bio); + +if (ret <0 ) +return ret; + ret =btrfs_check_super_csum (fs_info, sb); +if (ret !=0 ) { +btrfs_err_rl (fs_info, +"super block at physical %llu devid %llu has bad csum" , + physical, dev->devid); +return -EIO ; + } +if (btrfs_super_generation (sb) != generation) { +btrfs_err_rl (fs_info, +"super block at physical %llu devid %llu has bad generation, has %llu expect %llu" , + physical, dev->devid, +btrfs_super_generation (sb), generation); +return -EUCLEAN ; + } + + ret =btrfs_validate_super (fs_info, sb,-1 ); +return ret; +} + static noinline_for_stack int scrub_supers(struct scrub_ctx *sctx,struct btrfs_device *scrub_dev) {int i;u64 bytenr;u64 gen; -int ret; +int ret =0 ; +struct page *page;struct btrfs_fs_info *fs_info = sctx->fs_info;if (BTRFS_FS_ERROR (fs_info))return -EROFS ; + page =alloc_page (GFP_KERNEL ); +if (!page) +return -ENOMEM ; +/* Seed devices of a new filesystem has their own generation. */ if (scrub_dev->fs_devices != fs_info->fs_devices) gen = scrub_dev->generation;
@@ -4269,15 +4310,12 @@ static noinline_for_stack int scrub_supers(struct scrub_ctx *sctx,if (!btrfs_check_super_location (scrub_dev, bytenr))continue ; - ret =scrub_sectors (sctx, bytenr,BTRFS_SUPER_INFO_SIZE , bytenr, - scrub_dev,BTRFS_EXTENT_FLAG_SUPER , gen, i, -NULL , bytenr); + ret =scrub_one_super (sctx, scrub_dev, page, bytenr, gen);if (ret) -return ret; +break ; } -wait_event (sctx->list_wait,atomic_read (&sctx->bios_in_flight) ==0 ); - -return 0 ; +__free_page (page); +return ret; }static void scrub_workers_put (struct btrfs_fs_info *fs_info)
Signature · 1 line
2.39.2
PATCH v5 2/13 btrfs: introduce a new allocator for scrub specific btrfs_bio
In reply to Qu WenruoCurrently we're doing a lot of work for btrfs_bio:
- Checksum verification for data read bios
- Bio splits if it crosses stripe boundary
- Read repair for data read bios
However for the incoming scrub patches, we don't want those extra functionality at all, just pure logical + mirror -> physical mapping ability.
Thus here we introduce:
- btrfs_bio::fs_info
This is for the new scrub specific btrfs_bio, which would not populate btrfs_bio::inode.
Thus we need such new member to grab a fs_info
This new member would always be populated.
- btrfs_scrub_bio_alloc() helper
The main differences between this and btrfs_bio_alloc() are:
* No need for nr_vecs
As we know scrub bio should not cross stripe boundary.
* Use @fs_info to replace @inode parameter
- An extra ASSERT() to make sure btrfs_bio::fs_info is populated
--- fs/btrfs/bio.c | 25 +++++++++++++++++++++++++ fs/btrfs/bio.h | 19 ++++++++++++++++++- 2 files changed, 43 insertions(+), 1 deletion(-)
fs/btrfs/bio.c +25 -0
@@ -36,6 +36,7 @@ void btrfs_bio_init(struct btrfs_bio *bbio, struct btrfs_inode *inode, {memset (bbio,0 , offsetof(struct btrfs_bio , bio)); bbio->inode = inode; + bbio->fs_info = inode->root->fs_info; bbio->end_io = end_io; bbio->private = private;atomic_set (&bbio->pending_ios,1 );
@@ -61,6 +62,30 @@ struct btrfs_bio *btrfs_bio_alloc(unsigned int nr_vecs, blk_opf_t opf,return bbio; } +/* +* Allocate a scrub specific btrfs_bio structure. +* +* This btrfs_bio would not go through any the btrfs special handling like +* checksum verification nor read-repair. +*/ +struct btrfs_bio *btrfs_scrub_bio_alloc (blk_opf_t opf, +struct btrfs_fs_info *fs_info, +btrfs_bio_end_io_t end_io,void *private) +{ +struct btrfs_bio *bbio; +struct bio *bio; + + bio =bio_alloc_bioset (NULL ,BTRFS_STRIPE_LEN >> fs_info->sectorsize_bits, + opf,GFP_NOFS , &btrfs_bioset); + bbio =btrfs_bio (bio); +memset (bbio,0 , offsetof(struct btrfs_bio , bio)); + bbio->fs_info = fs_info; + bbio->end_io = end_io; + bbio->private = private; +atomic_set (&bbio->pending_ios,1 ); +return bbio; +} +static struct btrfs_bio *btrfs_split_bio (struct btrfs_fs_info *fs_info,struct btrfs_bio *orig_bbio,u64 map_length,bool use_append)
fs/btrfs/bio.h +18 -1
@@ -30,7 +30,12 @@ typedef void (*btrfs_bio_end_io_t)(struct btrfs_bio *bbio);* passed to btrfs_submit_bio for mapping to the physical devices. */ struct btrfs_bio { -/* Inode and offset into it that this I/O operates on. */ +/* +* Inode and offset into it that this I/O operates on. +* +* @inode can be NULL for callers who don't want any advanced features +* like read-time repair. +*/ struct btrfs_inode *inode;u64 file_offset;
@@ -58,6 +63,15 @@ struct btrfs_bio {atomic_t pending_ios;struct work_struct end_io_work; +/* +* For cases where callers only want to read/write from a logical +* bytenr, in that case @inode can be NULL, and we need such +* @fs_info pointer to grab the corresponding fs_info. +* +* Should always be populated. +*/ +struct btrfs_fs_info *fs_info; +/* * This member must come last, bio_alloc_bioset will allocate enough * bytes for entire btrfs_bio but relies on bio being last.
@@ -78,6 +92,9 @@ void btrfs_bio_init(struct btrfs_bio *bbio, struct btrfs_inode *inode,struct btrfs_bio *btrfs_bio_alloc (unsigned int nr_vecs,blk_opf_t opf,struct btrfs_inode *inode,btrfs_bio_end_io_t end_io,void *private); +struct btrfs_bio *btrfs_scrub_bio_alloc (blk_opf_t opf, +struct btrfs_fs_info *fs_info, +btrfs_bio_end_io_t end_io,void *private);static inline void btrfs_bio_end_io (struct btrfs_bio *bbio,blk_status_t status) {
Signature · 1 line
2.39.2
PATCH v5 3/13 btrfs: introduce a new helper to submit read bio for scrub
In reply to Qu WenruoThe new helper, btrfs_submit_scrub_read(), would be mostly a subset of btrfs_submit_bio(), with the following limitations:
- Only supports read
- @mirror_num must be > 0
- No read-time repair nor checksum verification
- The @bbio must not cross stripe boundary
This would provide the basis for unified read repair for scrub, as we no longer needs to handle RAID56 recovery all by scrub, and RAID56 data stripes scrub can share the same code of read and repair.
The repair part would be the same as non-RAID56, as we only need to try the next mirror.
--- fs/btrfs/bio.c | 48 ++++++++++++++++++++++++++++++++++++++++++++---- fs/btrfs/bio.h | 1 + 2 files changed, 45 insertions(+), 4 deletions(-)
fs/btrfs/bio.c +44 -4
@@ -333,8 +333,8 @@ static void btrfs_end_bio_work(struct work_struct *work) { struct btrfs_bio *bbio = container_of(work, struct btrfs_bio, end_io_work); -/* Metadata reads are checked and repaired by the submitter. */ -if (bbio->bio.bi_opf &REQ_META ) +/* Metadata or scrub reads are checked and repaired by the submitter. */ +if (bbio->bio.bi_opf &REQ_META || !bbio->inode) bbio->end_io (bbio);else btrfs_check_read_bio (bbio, bbio->bio.bi_private);
@@ -344,7 +344,7 @@ static void btrfs_simple_end_io(struct bio *bio) {struct btrfs_bio *bbio =btrfs_bio (bio);struct btrfs_device *dev = bio->bi_private; -struct btrfs_fs_info *fs_info = bbio->inode->root->fs_info; +struct btrfs_fs_info *fs_info = bbio->fs_info;btrfs_bio_counter_dec (fs_info);
@@ -368,7 +368,8 @@ static void btrfs_raid56_end_io(struct bio *bio)btrfs_bio_counter_dec (bioc->fs_info); bbio->mirror_num = bioc->mirror_num; -if (bio_op (bio) ==REQ_OP_READ && !(bbio->bio.bi_opf &REQ_META )) +if (bio_op (bio) ==REQ_OP_READ && bbio->inode && + !(bbio->bio.bi_opf &REQ_META ))btrfs_check_read_bio (bbio,NULL );else btrfs_orig_bbio_end_io (bbio);
@@ -714,6 +715,45 @@ static bool btrfs_submit_chunk(struct btrfs_bio *bbio, int mirror_num)return true; } +/* +* Scrub read special version, with extra limits: +* +* - Only support read for scrub usage +* - @mirror_num must be >0 +* - No read-time repair nor checksum verification. +* - The @bbio must not cross stripe boundary. +*/ +void btrfs_submit_scrub_read (struct btrfs_bio *bbio,int mirror_num) +{ +struct btrfs_fs_info *fs_info = bbio->fs_info; +u64 logical = bbio->bio.bi_iter.bi_sector <<SECTOR_SHIFT ; +u64 length = bbio->bio.bi_iter.bi_size; +u64 map_length = length; +struct btrfs_io_context *bioc =NULL ; +struct btrfs_io_stripe smap; +int ret; + +ASSERT (fs_info); +ASSERT (mirror_num >0 ); +ASSERT (btrfs_op (&bbio->bio) ==BTRFS_MAP_READ ); +ASSERT (!bbio->inode); + +btrfs_bio_counter_inc_blocked (fs_info); + ret =__btrfs_map_block (fs_info,btrfs_op (&bbio->bio), logical, + &map_length, &bioc, &smap, &mirror_num,1 ); +if (ret) + goto fail; + +/* Caller should ensure the @bbio doesn't cross stripe boundary. */ +ASSERT (map_length >= length); +__btrfs_submit_bio (&bbio->bio, bioc, &smap, mirror_num); +return ; + +fail: +btrfs_bio_counter_dec (fs_info); +btrfs_bio_end_io (bbio,errno_to_blk_status (ret)); +} +void btrfs_submit_bio (struct btrfs_bio *bbio,int mirror_num) {while (!btrfs_submit_chunk (bbio, mirror_num))
fs/btrfs/bio.h +1 -0
@@ -106,6 +106,7 @@ static inline void btrfs_bio_end_io(struct btrfs_bio *bbio, blk_status_t status)#define REQ_BTRFS_ONE_ORDERED REQ_DRVvoid btrfs_submit_bio (struct btrfs_bio *bbio,int mirror_num); +void btrfs_submit_scrub_read (struct btrfs_bio *bbio,int mirror_num);int btrfs_repair_io_failure (struct btrfs_fs_info *fs_info,u64 ino,u64 start,u64 length,u64 logical,struct page *page,unsigned int pg_offset,int mirror_num);
Signature · 1 line
2.39.2
Re: [PATCH v5 03/13] btrfs: introduce a new helper to submit read bio for scrub
Quoted 8 lines · Qu Wenruo
The new helper,
btrfs_submit_scrub_read(), would be mostly a subset ofbtrfs_submit_bio(), with the following limitations:- Only supports read
- @mirror_num must be > 0
- No read-time repair nor checksum verification
- The @bbio must not cross stripe boundary
Quoted 6 lines
This would provide the basis for unified read repair for scrub, as we no longer needs to handle RAID56 recovery all by scrub, and RAID56 data stripes scrub can share the same code of read and repair.
The repair part would be the same as non-RAID56, as we only need to try the next mirror.
Stupid question: what do we actually still need this and the write helper for now that I think the generic helpers should work just fine without bbio->inode?
Re: [PATCH v5 03/13] btrfs: introduce a new helper to submit read bio for scrub
Quoted 13 lines · Christoph Hellwig
Quoted 12 lines · Qu Wenruo
The new helper,
btrfs_submit_scrub_read(), would be mostly a subset ofbtrfs_submit_bio(), with the following limitations:- Only supports read
- @mirror_num must be > 0
- No read-time repair nor checksum verification
- The @bbio must not cross stripe boundaryThis would provide the basis for unified read repair for scrub, as we no longer needs to handle RAID56 recovery all by scrub, and RAID56 data stripes scrub can share the same code of read and repair.
Quoted 6 lines
Quoted 2 lines
The repair part would be the same as non-RAID56, as we only need to try the next mirror.
Stupid question: what do we actually still need this and the write helper for now that I think the generic helpers should work just fine without
bbio->inode?
For read part, as long as we skip all the csum verification and csum search, it can go the generic helper. Although this may needs some coordinate during merge.
But in the future, mostly for the ZNS RST patches, we need special handling for the garbage range.
Johannes is already testing his RST branches upon this series, and he is hitting the ASSERT() on the mapped length due to RST changes. In that case, we need to skip certain ranges, and that's specific to scrub usage.
Thus for read part, I'd still prefer a scrub specific helper, for the incoming RST expansion.
For the write helper, it's very different.
The btrfs_submit_bio() would duplicate the writes to all mirrors, which is exactly what I want to avoid for scrub usage. Thus the scrub specific write helper would always map the write to a single stripe, even for RAID56 writes.
So the write helper must stay.
Thanks,
Qu
Re: [PATCH v5 03/13] btrfs: introduce a new helper to submit read bio for scrub
Quoted 2 lines · Qu Wenruo
For read part, as long as we skip all the csum verification and csum search, it can go the generic helper.
Yes, and we can just check for bbio->inode to decide that, like you did in the earliest versions of the series.
Quoted 7 lines
But in the future, mostly for the ZNS RST patches, we need special handling for the garbage range.
Johannes is already testing his RST branches upon this series, and he is hitting the
ASSERT()on the mapped length due to RST changes. In that case, we need to skip certain ranges, and that's specific to scrub usage.
Can you explain what the issue is here?
Quoted 4 lines
The
btrfs_submit_bio()would duplicate the writes to all mirrors, which is exactly what I want to avoid for scrub usage.
Thus the scrub specific write helper would always map the write to a single stripe, even for RAID56 writes.
That's basically what btrfs_repair_io_failure does. Any chance we could share the code for those instead of going to back to creating multiple code paths for I/O submission?
Re: [PATCH v5 03/13] btrfs: introduce a new helper to submit read bio for scrub
Quoted 10 lines · Christoph Hellwig
Quoted 2 lines · Qu Wenruo
For read part, as long as we skip all the csum verification and csum search, it can go the generic helper.
Yes, and we can just check for
bbio->inodeto decide that, like you did in the earliest versions of the series.Quoted 3 lines
But in the future, mostly for the ZNS RST patches, we need special handling for the garbage range.
Quoted 6 lines
Quoted 4 lines
Johannes is already testing his RST branches upon this series, and he is hitting the
ASSERT()on the mapped length due to RST changes. In that case, we need to skip certain ranges, and that's specific to scrub usage.Can you explain what the issue is here?
The new RST would add a new layer between physical address and logical address.
Thus every read would do an extra lookup (almost at extent level), that's done in btrfs_map_block().
However the new scrub code introduced a new behavior, which is never really utilized by any other code path. Now scrub would read the full 64K in one go, even this means we can read out sectors not utilized by any extent.
The new behavior itself reduces IOPS, thus it should be an overall win.
And for regular devices or non-RST zoned devices, we just read out some garbage, and scrub verification code would skip them.
But for RST cases, there would be no mapping for the garbage range, thus we need to skip those garbage for RST cases.
The dedicated read helper would provide the location for us to handle this RST scrub specific case.
Quoted 9 lines
Quoted 5 lines
The
btrfs_submit_bio()would duplicate the writes to all mirrors, which is exactly what I want to avoid for scrub usage.
Thus the scrub specific write helper would always map the write to a single stripe, even for RAID56 writes.That's basically what
btrfs_repair_io_failuredoes. Any chance we could share the code for those instead of going to back to creating multiple code paths for I/O submission?
That sounds like a pretty good candidate to merge.
The core shares the same idea, only the support code is different.
I'm fine merging the core logic, although I believe we still need different entrance functions. (e.g repair is only done for one sector, requires inode/file offset, and is done synchronously.)
Thanks,
Qu
Re: [PATCH v5 03/13] btrfs: introduce a new helper to submit read bio for scrub
Quoted 9 lines · Qu Wenruo
The new behavior itself reduces IOPS, thus it should be an overall win. And for regular devices or non-RST zoned devices, we just read out some garbage, and scrub verification code would skip them.
But for RST cases, there would be no mapping for the garbage range, thus we need to skip those garbage for RST cases.
The dedicated read helper would provide the location for us to handle this RST scrub specific case.
Well, if did just call btrfs_submit_chunk, the RST lookup would ensure you only get the length of the RST mapping, and you get the behavior you want without duplication. We'd need to make it non-static (and document it), but I'd still be much happier about that than yet another I/O submission interface.
Quoted 7 lines
The core shares the same idea, only the support code is different.
I'm fine merging the core logic, although I believe we still need different entrance functions.
(e.g repair is only done for one sector, requires inode/file offset, and is done synchronously.)
Well, the inode number and start is only used for a debug printk, so we can easily move that into the caller. As for the single sectors vs not, what we really should do is to move the bio allocation to the caller, which means the caller cna decided how large the bio is. Together with moving the printk that also makes the interface much simpler as we'll need a lot less arguments.
Re: [PATCH v5 03/13] btrfs: introduce a new helper to submit read bio for scrub
Quoted 8 lines · Christoph Hellwig
Quoted 7 lines · Qu Wenruo
The new behavior itself reduces IOPS, thus it should be an overall win. And for regular devices or non-RST zoned devices, we just read out some garbage, and scrub verification code would skip them.
But for RST cases, there would be no mapping for the garbage range, thus we need to skip those garbage for RST cases.
Quoted 8 lines
Quoted 2 lines
The dedicated read helper would provide the location for us to handle this RST scrub specific case.
Well, if did just call
btrfs_submit_chunk, the RST lookup would ensure you only get the length of the RST mapping, and you get the behavior you want without duplication. We'd need to make it non-static (and document it), but I'd still be much happier about that than yet another I/O submission interface.
But in that case, wouldn't we just error out?
As if RST can not find the mapping, it can error out.
The behavior of handling missing RST mapping is different between the regular read path and scrub read path.
For regular path, if we're reading some range without an RST map, we should error out.
While for scrub path, we should skip (or if you want, we can also read some garbage) the unmapped range. And for non-RST cases, we should not hit stripe boundary (although this is just a debugging check).
Quoted 9 lines
Quoted 8 lines
The core shares the same idea, only the support code is different.
I'm fine merging the core logic, although I believe we still need different entrance functions.
(e.g repair is only done for one sector, requires inode/file offset, and is done synchronously.)
Quoted 6 lines
Well, the inode number and start is only used for a debug printk, so we can easily move that into the caller. As for the single sectors vs not, what we really should do is to move the bio allocation to the caller, which means the caller cna decided how large the bio is. Together with moving the printk that also makes the interface much simpler as we'll need a lot less arguments.
Yep, I'm totally fine with a helper to do the core single-dev mapping helper.
Just pass logical + mirror as parameters to the helper, and returns a smap or dev + physical, and let the caller do the submission.
Thanks,
Qu
Re: [PATCH v5 03/13] btrfs: introduce a new helper to submit read bio for scrub
Quoted 7 lines · Qu Wenruo
Quoted 5 lines
Well, if did just call
btrfs_submit_chunk, the RST lookup would ensure you only get the length of the RST mapping, and you get the behavior you want without duplication. We'd need to make it non-static (and document it), but I'd still be much happier about that than yet another I/O submission interface.But in that case, wouldn't we just error out?
btrfs_submit_chunk is greedy. But yes, if there was no mapping at all I guess it would error out and we'd need to find a way to handle that. But that still seems better than duplicating the logic again.
Re: [PATCH v5 03/13] btrfs: introduce a new helper to submit read bio for scrub
Quoted 7 lines · Christoph Hellwig
Quoted 6 lines · Qu Wenruo
Quoted 5 lines
Well, if did just call
btrfs_submit_chunk, the RST lookup would ensure you only get the length of the RST mapping, and you get the behavior you want without duplication. We'd need to make it non-static (and document it), but I'd still be much happier about that than yet another I/O submission interface.
Quoted 5 lines
Quoted 1 line
But in that case, wouldn't we just error out?
btrfs_submit_chunkis greedy. But yes, if there was no mapping at all I guess it would error out and we'd need to find a way to handle that. But that still seems better than duplicating the logic again.
Well, to me the whole btrfs_submit_chunk() is already super modular (great work from you, very appreciated), thus new scrub_read path only goes less than 30 lines.
At least to me, a few more lines for a special path seems worthy. Especially when that scrub path should never be utilized by anyone else.
But I'm still open minded to merge if proven the change is small enough. Let us see what we can do after the next update of RST patchset and determine then.
Thanks,
Qu
PATCH v5 4/13 btrfs: introduce a new helper to submit write bio for scrub
In reply to Qu WenruoJust like the special scrub read, scrub write also has its extra niches:
- Only write back to single device
Even for read-repair on RAID56, we only update the corrupted data stripe itself, not triggering the full RMW path.
This makes scrub writeback a perfect match for the single stripe quick path.
- Requires a valid @mirror_num
For RAID56 case, only @mirror_num == 1 is supported. For non-RAID56 cases, we need @mirror_num to locate our stripe.
- Need to manually specify if it's for dev-replace
For scrub path we can write back to the original device (for read-repair) and to the target device (for replace) at the same time, but with different sectors (read-repair only writes repaired sectors, while dev-replace writes all good sectors).
So here we need a bool to specify the case.
- No data csum generation
--- fs/btrfs/bio.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/bio.h | 2 ++ 2 files changed, 94 insertions(+)
fs/btrfs/bio.c +92 -0
@@ -754,6 +754,98 @@ void btrfs_submit_scrub_read(struct btrfs_bio *bbio, int mirror_num)btrfs_bio_end_io (bbio,errno_to_blk_status (ret)); } +/* +* Scrub write special version. Some extra limits: +* +* - Only support write back for dev-replace and scrub read-repair. +* This means, the write bio, even for RAID56, would only +* be mapped to single device. +* +* - @mirror_num must be >0. +* To indicate which mirror to be written. +* If it's RAID56, it must be 1 (data stripes). +* +* - The @bbio must not cross stripe boundary. +* +* - If @dev_replace is true, the resulted stripe must be mapped to +* replace source device. +* +* - No csum geneartion. +*/ +void btrfs_submit_scrub_write (struct btrfs_bio *bbio,int mirror_num, +bool dev_replace) +{ +struct btrfs_fs_info *fs_info = bbio->fs_info; +u64 logical = bbio->bio.bi_iter.bi_sector <<SECTOR_SHIFT ; +u64 length = bbio->bio.bi_iter.bi_size; +u64 map_length = length; +struct btrfs_io_context *bioc =NULL ; +struct btrfs_io_stripe smap; +int ret; + +ASSERT (fs_info); +ASSERT (mirror_num >0 ); +ASSERT (btrfs_op (&bbio->bio) ==BTRFS_MAP_WRITE ); +ASSERT (!bbio->inode); + +btrfs_bio_counter_inc_blocked (fs_info); + ret =__btrfs_map_block (fs_info,btrfs_op (&bbio->bio), logical, + &map_length, &bioc, &smap, &mirror_num,1 ); +if (ret) + goto fail; + +/* Caller should ensure the @bbio doesn't cross stripe boundary. */ +ASSERT (map_length >= length); +if (btrfs_op (&bbio->bio) ==BTRFS_MAP_WRITE &&btrfs_is_zoned (fs_info)) { + bbio->bio.bi_opf &= ~REQ_OP_WRITE ; + bbio->bio.bi_opf |=REQ_OP_ZONE_APPEND ; + } + +if (!bioc) + goto submit; + +/* Map the RAID56 multi-stripe writes to a single one. */ +if (bioc->map_type &BTRFS_BLOCK_GROUP_RAID56_MASK ) { +int data_stripes = (bioc->map_type &BTRFS_BLOCK_GROUP_RAID5 ) ? + bioc->num_stripes -1 : bioc->num_stripes -2 ; +int i; + +/* This special write only works for data stripes. */ +ASSERT (mirror_num ==1 ); +for (i =0 ; i < data_stripes; i++) { +u64 stripe_start = bioc->full_stripe_logical + + (i <<BTRFS_STRIPE_LEN_SHIFT ); + +if (logical >= stripe_start && + logical < stripe_start +BTRFS_STRIPE_LEN ) +break ; + } +ASSERT (i < data_stripes); + smap.dev = bioc->stripes[i].dev; + smap.physical = bioc->stripes[i].physical + + ((logical - bioc->full_stripe_logical) & +BTRFS_STRIPE_LEN_MASK ); + goto submit; + } +ASSERT (mirror_num <= bioc->num_stripes); + smap.dev = bioc->stripes[mirror_num -1 ].dev; + smap.physical = bioc->stripes[mirror_num -1 ].physical; +submit: +ASSERT (smap.dev); +btrfs_put_bioc (bioc); + bioc =NULL ; +if (dev_replace) { +ASSERT (smap.dev == fs_info->dev_replace.srcdev); + smap.dev = fs_info->dev_replace.tgtdev; + } +__btrfs_submit_bio (&bbio->bio, bioc, &smap, mirror_num); +return ; + +fail: +btrfs_bio_counter_dec (fs_info); +btrfs_bio_end_io (bbio,errno_to_blk_status (ret)); +} +void btrfs_submit_bio (struct btrfs_bio *bbio,int mirror_num) {while (!btrfs_submit_chunk (bbio, mirror_num))
fs/btrfs/bio.h +2 -0
@@ -107,6 +107,8 @@ static inline void btrfs_bio_end_io(struct btrfs_bio *bbio, blk_status_t status)void btrfs_submit_bio (struct btrfs_bio *bbio,int mirror_num);void btrfs_submit_scrub_read (struct btrfs_bio *bbio,int mirror_num); +void btrfs_submit_scrub_write (struct btrfs_bio *bbio,int mirror_num, +bool dev_replace);int btrfs_repair_io_failure (struct btrfs_fs_info *fs_info,u64 ino,u64 start,u64 length,u64 logical,struct page *page,unsigned int pg_offset,int mirror_num);
Signature · 1 line
2.39.2
PATCH v5 5/13 btrfs: scrub: introduce the structure for new BTRFS_STRIPE_LEN based interface
In reply to Qu WenruoThis patch introduces the following structures:
- scrub_sector_verification
Contains all the needed info to verify one sector (data or metadata).
- scrub_stripe
Contains all needed members (mostly bitmap based) to scrub one stripe (with a length of BTRFS_STRIPE_LEN).
The basic idea is, we keep the existing per-device scrub behavior, but merge all the scrub_bio/scrub_bio into one generic structure, and read the full BTRFS_STRIPE_LEN stripe in the first try.
This means we will read some sectors which is not scrub target, but that's fine. At dev-replace time we only writeback the utilized and good sectors, and for read-repair we only writeback the repaired sectors.
With every read submitted in BTRFS_STRIPE_LEN, the need for complex bio formshaping would be gone.
Although to get the same performance of the old scrub behavior, we would need to submit the initial read for two stripes at once.
--- fs/btrfs/scrub.c | 142 +++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/scrub.h | 8 +++ 2 files changed, 150 insertions(+)
fs/btrfs/scrub.c +142 -0
@@ -70,6 +70,94 @@ struct scrub_ctx;*/ #define BTRFS_MAX_MIRRORS (4 + 1) +/* Represent one sector and its needed info to verify the content. */ +struct scrub_sector_verification { +bool is_metadata; + +union { +/* +* Csum pointer for data csum verification. +* Should point to a sector csum inside scrub_stripe::csums. +* +* NULL if this data sector has no csum. +*/ +u8 *csum; + +/* +* Extra info for metadata verification. +* All sectors inside a tree block shares the same +* geneartion. +*/ +u64 generation; + }; +}; + +enum scrub_stripe_flags { +/* Set when @mirror_num, @dev, @physical and @logical is set. */ +SCRUB_STRIPE_FLAG_INITIALIZED , + +/* Set when the read-repair is finished. */ +SCRUB_STRIPE_FLAG_REPAIR_DONE , +}; + +#define SCRUB_STRIPE_PAGES (BTRFS_STRIPE_LEN / PAGE_SIZE) +/* +* Represent one continuous range with a length of BTRFS_STRIPE_LEN. +*/ +struct scrub_stripe { +struct btrfs_block_group *bg; + +struct page *pages[SCRUB_STRIPE_PAGES ]; +struct scrub_sector_verification *sectors; + +struct btrfs_device *dev; +u64 logical; +u64 physical; + +u16 mirror_num; + +/* Should be BTRFS_STRIPE_LEN / sectorsize. */ +u16 nr_sectors; + +atomic_t pending_io; +wait_queue_head_t io_wait; + +/* +* Indicates the states of the stripe. +* Bits are defined in scrub_stripe_flags enum. +*/ +unsigned long state; + +/* Indicates which sectors are covered by extent items. */ +unsigned long extent_sector_bitmap; + +/* +* The errors hit during the initial read of the stripe. +* +* Would be utilized for error reporting and repair. +*/ +unsigned long init_error_bitmap; + +/* +* The following error bitmaps are all for the current status. +* Every time we submit a new read, those bitmaps may be updated. +* +* error_bitmap = io_error_bitmap | csum_error_bitmap | meta_error_bitmap; +* +* IO and csum errors can happen for both metadata and data. +*/ +unsigned long error_bitmap; +unsigned long io_error_bitmap; +unsigned long csum_error_bitmap; +unsigned long meta_error_bitmap; + +/* +* Checksum for the whole stripe if this stripe is inside a data block +* group. +*/ +u8 *csums; +}; +struct scrub_recover {refcount_t refs;struct btrfs_io_context *bioc;
@@ -266,6 +354,60 @@ static void detach_scrub_page_private(struct page *page)#endif } +static void release_scrub_stripe (struct scrub_stripe *stripe) +{ +if (!stripe) +return ; + +for (int i =0 ; i <SCRUB_STRIPE_PAGES ; i++) { +if (stripe->pages[i]) +__free_page (stripe->pages[i]); + stripe->pages[i] =NULL ; + } +kfree (stripe->sectors); +kfree (stripe->csums); + stripe->sectors =NULL ; + stripe->csums =NULL ; + stripe->state =0 ; +} + +int init_scrub_stripe (struct btrfs_fs_info *fs_info,struct scrub_stripe *stripe) +{ +int ret; + +memset (stripe,0 ,sizeof (*stripe)); + + stripe->nr_sectors =BTRFS_STRIPE_LEN >> fs_info->sectorsize_bits; + stripe->state =0 ; + +init_waitqueue_head (&stripe->io_wait); +atomic_set (&stripe->pending_io,0 ); + + ret =btrfs_alloc_page_array (SCRUB_STRIPE_PAGES , stripe->pages); +if (ret <0 ) + goto error; + + stripe->sectors =kcalloc (stripe->nr_sectors, +sizeof (struct scrub_sector_verification ), +GFP_KERNEL ); +if (!stripe->sectors) + goto error; + + stripe->csums =kzalloc ((BTRFS_STRIPE_LEN >> fs_info->sectorsize_bits) * + fs_info->csum_size,GFP_KERNEL ); +if (!stripe->csums) + goto error; +return 0 ; +error: +release_scrub_stripe (stripe); +return -ENOMEM ; +} + +void wait_scrub_stripe_io (struct scrub_stripe *stripe) +{ +wait_event (stripe->io_wait,atomic_read (&stripe->pending_io) ==0 ); +} + static struct scrub_block *alloc_scrub_block(struct scrub_ctx *sctx, struct btrfs_device *dev, u64 logical, u64 physical,
fs/btrfs/scrub.h +8 -0
@@ -13,4 +13,12 @@ int btrfs_scrub_cancel_dev(struct btrfs_device *dev);int btrfs_scrub_progress (struct btrfs_fs_info *fs_info,u64 devid,struct btrfs_scrub_progress *progress); +/* +* The following functions are temporary exports to avoid warning on unused +* static functions. +*/ +struct scrub_stripe ; +int init_scrub_stripe (struct btrfs_fs_info *fs_info,struct scrub_stripe *stripe); +void wait_scrub_stripe_io (struct scrub_stripe *stripe); +#endif
Signature · 1 line
2.39.2
PATCH v5 6/13 btrfs: scrub: introduce a helper to find and fill the sector info for a scrub_stripe
In reply to Qu WenruoThe new helper will search the extent tree to find the first extent of a logical range, then fill the sectors array by two loops:
- Loop 1 to fill common bits and metadata generation
- Loop 2 to fill csum data (only for data bgs)
This loop will use the new btrfs_lookup_csums_bitmap() to fill the full csum buffer, and set scrub_sector_verification::csum.
With all the needed info fulfilled by this function, later we only need to submit and verify the stripe.
Here we temporarily export the helper to avoid wanring on unused static function.
--- fs/btrfs/file-item.c | 9 ++- fs/btrfs/file-item.h | 3 +- fs/btrfs/raid56.c | 2 +- fs/btrfs/scrub.c | 148 +++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/scrub.h | 4 ++ 5 files changed, 163 insertions(+), 3 deletions(-)
fs/btrfs/file-item.c +8 -1
@@ -597,7 +597,8 @@ int btrfs_lookup_csums_list(struct btrfs_root *root, u64 start, u64 end,* in is large enough to contain all csums. */ int btrfs_lookup_csums_bitmap (struct btrfs_root *root,u64 start,u64 end, -u8 *csum_buf,unsigned long *csum_bitmap) +u8 *csum_buf,unsigned long *csum_bitmap, +bool search_commit) {struct btrfs_fs_info *fs_info = root->fs_info;struct btrfs_key key;
@@ -614,6 +615,12 @@ int btrfs_lookup_csums_bitmap(struct btrfs_root *root, u64 start, u64 end,if (!path)return -ENOMEM ; +if (search_commit) { + path->skip_locking =1 ; + path->reada =READA_FORWARD ; + path->search_commit_root =1 ; + } + key.objectid =BTRFS_EXTENT_CSUM_OBJECTID ; key.type =BTRFS_EXTENT_CSUM_KEY ; key.offset = start;
fs/btrfs/file-item.h +2 -1
@@ -57,7 +57,8 @@ int btrfs_lookup_csums_list(struct btrfs_root *root, u64 start, u64 end, struct list_head *list, int search_commit, bool nowait);int btrfs_lookup_csums_bitmap (struct btrfs_root *root,u64 start,u64 end, -u8 *csum_buf,unsigned long *csum_bitmap); +u8 *csum_buf,unsigned long *csum_bitmap, +bool search_commit); void btrfs_extent_item_to_extent_map(struct btrfs_inode *inode, const struct btrfs_path *path, struct btrfs_file_extent_item *fi,
fs/btrfs/raid56.c +1 -1
@@ -2113,7 +2113,7 @@ static void fill_data_csums(struct btrfs_raid_bio *rbio) } ret =btrfs_lookup_csums_bitmap (csum_root, start, start + len -1 , - rbio->csum_buf, rbio->csum_bitmap); + rbio->csum_buf, rbio->csum_bitmap, false);if (ret <0 ) goto error;if (bitmap_empty (rbio->csum_bitmap, len >> fs_info->sectorsize_bits))
fs/btrfs/scrub.c +148 -0
154 lines not on this page · raw message
fs/btrfs/scrub.h +4 -0
@@ -20,5 +20,9 @@ int btrfs_scrub_progress(struct btrfs_fs_info *fs_info, u64 devid,struct scrub_stripe ;int init_scrub_stripe (struct btrfs_fs_info *fs_info,struct scrub_stripe *stripe);void wait_scrub_stripe_io (struct scrub_stripe *stripe); +int scrub_find_fill_first_stripe (struct btrfs_block_group *bg, +struct btrfs_device *dev,u64 physical, +int mirror_num,u64 logical_start, +u32 logical_len,struct scrub_stripe *stripe);#endif
Signature · 1 line
2.39.2
PATCH v5 7/13 btrfs: scrub: introduce a helper to verify one metadata
In reply to Qu WenruoThe new helper, scrub_verify_one_metadata(), is almost the same as scrub_checksum_tree_block().
The difference is in how we grab the pages.
--- fs/btrfs/scrub.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/scrub.h | 1 + 2 files changed, 117 insertions(+)
fs/btrfs/scrub.c +116 -0
@@ -2159,6 +2159,122 @@ static int scrub_checksum_data(struct scrub_block *sblock)return sblock->checksum_error; } +static struct page *scrub_stripe_get_page (struct scrub_stripe *stripe, +int sector_nr) +{ +struct btrfs_fs_info *fs_info = stripe->bg->fs_info; +int page_index = (sector_nr << fs_info->sectorsize_bits) >>PAGE_SHIFT ; + +return stripe->pages[page_index]; +} + +static unsigned int scrub_stripe_get_page_offset (struct scrub_stripe *stripe, +int sector_nr) +{ +struct btrfs_fs_info *fs_info = stripe->bg->fs_info; + +return offset_in_page (sector_nr << fs_info->sectorsize_bits); +} + +void scrub_verify_one_metadata (struct scrub_stripe *stripe,int sector_nr) +{ +struct btrfs_fs_info *fs_info = stripe->bg->fs_info; +const unsigned int sectors_per_tree = fs_info->nodesize >> + fs_info->sectorsize_bits; +const u64 logical = stripe->logical + (sector_nr << fs_info->sectorsize_bits); +const struct page *first_page =scrub_stripe_get_page (stripe, sector_nr); +const unsigned int first_off =scrub_stripe_get_page_offset (stripe, sector_nr); +SHASH_DESC_ON_STACK (shash, fs_info->csum_shash); +u8 on_disk_csum[BTRFS_CSUM_SIZE ]; +u8 calculated_csum[BTRFS_CSUM_SIZE ]; +struct btrfs_header *header; + +/* +* Here we don't have a good way to attach the pages (and subpages) +* to a dummy extent buffer, thus we have to directly grab the members +* from pages. +*/ + header = (struct btrfs_header *)(page_address (first_page) + first_off); +memcpy (on_disk_csum, header->csum, fs_info->csum_size); + +if (logical !=btrfs_stack_header_bytenr (header)) { +bitmap_set (&stripe->csum_error_bitmap, sector_nr, + sectors_per_tree); +bitmap_set (&stripe->error_bitmap, sector_nr, + sectors_per_tree); +btrfs_warn_rl (fs_info, +"tree block %llu mirror %u has bad bytenr, has %llu want %llu" , + logical, stripe->mirror_num, +btrfs_stack_header_bytenr (header), logical); +return ; + } +if (memcmp (header->fsid, fs_info->fs_devices->fsid,BTRFS_FSID_SIZE ) !=0 ) { +bitmap_set (&stripe->meta_error_bitmap, sector_nr, + sectors_per_tree); +bitmap_set (&stripe->error_bitmap, sector_nr, + sectors_per_tree); +btrfs_warn_rl (fs_info, +"tree block %llu mirror %u has bad fsid, has %pU want %pU" , + logical, stripe->mirror_num, + header->fsid, fs_info->fs_devices->fsid); +return ; + } +if (memcmp (header->chunk_tree_uuid, fs_info->chunk_tree_uuid, +BTRFS_UUID_SIZE ) !=0 ) { +bitmap_set (&stripe->meta_error_bitmap, sector_nr, + sectors_per_tree); +bitmap_set (&stripe->error_bitmap, sector_nr, + sectors_per_tree); +btrfs_warn_rl (fs_info, +"tree block %llu mirror %u has bad chunk tree uuid, has %pU want %pU" , + logical, stripe->mirror_num, + header->chunk_tree_uuid, fs_info->chunk_tree_uuid); +return ; + } + +/* Now check tree block csum. */ + shash->tfm = fs_info->csum_shash; +crypto_shash_init (shash); +crypto_shash_update (shash,page_address (first_page) + first_off + +BTRFS_CSUM_SIZE , fs_info->sectorsize -BTRFS_CSUM_SIZE ); + +for (int i = sector_nr +1 ; i < sector_nr + sectors_per_tree; i++) { +struct page *page =scrub_stripe_get_page (stripe, i); +unsigned int page_off =scrub_stripe_get_page_offset (stripe, i); + +crypto_shash_update (shash,page_address (page) + page_off, + fs_info->sectorsize); + } +crypto_shash_final (shash, calculated_csum); +if (memcmp (calculated_csum, on_disk_csum, fs_info->csum_size) !=0 ) { +bitmap_set (&stripe->meta_error_bitmap, sector_nr, + sectors_per_tree); +bitmap_set (&stripe->error_bitmap, sector_nr, + sectors_per_tree); +btrfs_warn_rl (fs_info, +"tree block %llu mirror %u has bad csum, has " CSUM_FMT " want " CSUM_FMT , + logical, stripe->mirror_num, +CSUM_FMT_VALUE (fs_info->csum_size, on_disk_csum), +CSUM_FMT_VALUE (fs_info->csum_size, calculated_csum)); +return ; + } +if (stripe->sectors[sector_nr].generation != +btrfs_stack_header_generation (header)) { +bitmap_set (&stripe->meta_error_bitmap, sector_nr, + sectors_per_tree); +bitmap_set (&stripe->error_bitmap, sector_nr, + sectors_per_tree); +btrfs_warn_rl (fs_info, +"tree block %llu mirror %u has bad geneartion, has %llu want %llu" , + logical, stripe->mirror_num, +btrfs_stack_header_generation (header), + stripe->sectors[sector_nr].generation); + } +bitmap_clear (&stripe->error_bitmap, sector_nr, sectors_per_tree); +bitmap_clear (&stripe->csum_error_bitmap, sector_nr, sectors_per_tree); +bitmap_clear (&stripe->meta_error_bitmap, sector_nr, sectors_per_tree); +} +static int scrub_checksum_tree_block (struct scrub_block *sblock) {struct scrub_ctx *sctx = sblock->sctx;
fs/btrfs/scrub.h +1 -0
@@ -24,5 +24,6 @@ int scrub_find_fill_first_stripe(struct btrfs_block_group *bg, struct btrfs_device *dev, u64 physical, int mirror_num, u64 logical_start, u32 logical_len, struct scrub_stripe *stripe); +void scrub_verify_one_metadata (struct scrub_stripe *stripe,int sector_nr);#endif
Signature · 1 line
2.39.2
PATCH v5 8/13 btrfs: scrub: introduce a helper to verify one scrub_stripe
In reply to Qu WenruoThe new helper, scrub_verify_stripe(), shares the same main workflow of the old scrub code.
The major differences are:
- How pages/page_offset is grabbed
Everything can be grabbed from scrub_stripe easily.
- When error report happens
Currently the helper only verify the sectors, not really doing any error reporting.
The error reporting would be done after we have done the repair.
--- fs/btrfs/scrub.c | 80 +++++++++++++++++++++++++++++++++++++++++++++++- fs/btrfs/scrub.h | 2 +- 2 files changed, 80 insertions(+), 2 deletions(-)
fs/btrfs/scrub.c +79 -1
@@ -2176,7 +2176,7 @@ static unsigned int scrub_stripe_get_page_offset(struct scrub_stripe *stripe,return offset_in_page (sector_nr << fs_info->sectorsize_bits); } -void scrub_verify_one_metadata (struct scrub_stripe *stripe,int sector_nr) +static void scrub_verify_one_metadata (struct scrub_stripe *stripe,int sector_nr) {struct btrfs_fs_info *fs_info = stripe->bg->fs_info; const unsigned int sectors_per_tree = fs_info->nodesize >>
@@ -2275,6 +2275,84 @@ void scrub_verify_one_metadata(struct scrub_stripe *stripe, int sector_nr)bitmap_clear (&stripe->meta_error_bitmap, sector_nr, sectors_per_tree); } +static void scrub_verify_one_sector (struct scrub_stripe *stripe, +int sector_nr) +{ +struct btrfs_fs_info *fs_info = stripe->bg->fs_info; +struct scrub_sector_verification *sector = &stripe->sectors[sector_nr]; +const unsigned int sectors_per_tree = fs_info->nodesize >> + fs_info->sectorsize_bits; +struct page *page =scrub_stripe_get_page (stripe, sector_nr); +unsigned int pgoff =scrub_stripe_get_page_offset (stripe, sector_nr); +u8 csum_buf[BTRFS_CSUM_SIZE ]; +int ret; + +ASSERT (sector_nr >=0 && sector_nr < stripe->nr_sectors); + +/* Sector not utilized, skip it. */ +if (!test_bit (sector_nr, &stripe->extent_sector_bitmap)) +return ; + +/* IO error, no need to check. */ +if (test_bit (sector_nr, &stripe->io_error_bitmap)) +return ; + +/* Metadata, verify the full tree block. */ +if (sector->is_metadata) { +/* +* Check if the tree block crosses the stripe boudary. +* If crossed the boundary, we can not verify it but only +* gives a warning. +* +* This can only happen in very old fs where chunks are not +* ensured to be stripe aligned. +*/ +if (unlikely (sector_nr + sectors_per_tree > stripe->nr_sectors)) { +btrfs_warn_rl (fs_info, +"tree block at %llu crosses stripe boundary %llu" , + stripe->logical + + (sector_nr << fs_info->sectorsize_bits), + stripe->logical); +return ; + } +scrub_verify_one_metadata (stripe, sector_nr); +return ; + } + +/* +* Data is much easier, we just verify the data csum (if we have). +* For cases without csum, we have no other choice but to trust it. +*/ +if (!sector->csum) { +clear_bit (sector_nr, &stripe->error_bitmap); +return ; + } + + ret =btrfs_check_sector_csum (fs_info, page, pgoff, csum_buf, sector->csum); +if (ret <0 ) { +set_bit (sector_nr, &stripe->csum_error_bitmap); +set_bit (sector_nr, &stripe->error_bitmap); + }else { +clear_bit (sector_nr, &stripe->csum_error_bitmap); +clear_bit (sector_nr, &stripe->error_bitmap); + } +} + +/* Verify specified sectors of a stripe. */ +void scrub_verify_one_stripe (struct scrub_stripe *stripe,unsigned long bitmap) +{ +struct btrfs_fs_info *fs_info = stripe->bg->fs_info; +const unsigned int sectors_per_tree = fs_info->nodesize >> + fs_info->sectorsize_bits; +int sector_nr; + +for_each_set_bit (sector_nr, &bitmap, stripe->nr_sectors) { +scrub_verify_one_sector (stripe, sector_nr); +if (stripe->sectors[sector_nr].is_metadata) + sector_nr += sectors_per_tree -1 ; + } +} +static int scrub_checksum_tree_block (struct scrub_block *sblock) {struct scrub_ctx *sctx = sblock->sctx;
fs/btrfs/scrub.h +1 -1
@@ -24,6 +24,6 @@ int scrub_find_fill_first_stripe(struct btrfs_block_group *bg, struct btrfs_device *dev, u64 physical, int mirror_num, u64 logical_start, u32 logical_len, struct scrub_stripe *stripe); -void scrub_verify_one_metadata (struct scrub_stripe *stripe,int sector_nr); +void scrub_verify_one_stripe (struct scrub_stripe *stripe,unsigned long bitmap);#endif
Signature · 1 line
2.39.2
PATCH v5 9/13 btrfs: scrub: introduce the main read repair worker for scrub_stripe
In reply to Qu WenruoThe new helper, scrub_stripe_read_repair_worker(), would handle the read-repair part:
- Wait for the previous submitted read IO to finish
- Verify the contents of the stripe
- Go through the remaining mirrors, using as large blocksize as possible At this stage, we just read out all the failed sectors from each mirror and re-verify.
If no more failed sector, we can exit.
- Go through all mirrors again, sector-by-sector this time This time, we read sector by sector, this is to address cases where one bad sector mismatches the drive's internal checksum, and cause the whole read range to fail.
We put this recovery method as the last resort, as sector-by-sector reading is slow, and read from other mirrors may have already fixed the errors.
--- fs/btrfs/scrub.c | 210 ++++++++++++++++++++++++++++++++++++++++++++++- fs/btrfs/scrub.h | 3 +- 2 files changed, 209 insertions(+), 4 deletions(-)
fs/btrfs/scrub.c +208 -2
@@ -121,6 +121,7 @@ struct scrub_stripe {atomic_t pending_io;wait_queue_head_t io_wait; +wait_queue_head_t repair_wait;/* * Indicates the states of the stripe.
@@ -156,6 +157,8 @@ struct scrub_stripe {* group. */ u8 *csums; + +struct work_struct work; };struct scrub_recover {
@@ -381,6 +384,7 @@ int init_scrub_stripe(struct btrfs_fs_info *fs_info, struct scrub_stripe *stripe stripe->state =0 ;init_waitqueue_head (&stripe->io_wait); +init_waitqueue_head (&stripe->repair_wait);atomic_set (&stripe->pending_io,0 ); ret =btrfs_alloc_page_array (SCRUB_STRIPE_PAGES , stripe->pages);
@@ -403,7 +407,7 @@ int init_scrub_stripe(struct btrfs_fs_info *fs_info, struct scrub_stripe *stripereturn -ENOMEM ; } -void wait_scrub_stripe_io (struct scrub_stripe *stripe) +static void wait_scrub_stripe_io (struct scrub_stripe *stripe) {wait_event (stripe->io_wait,atomic_read (&stripe->pending_io) ==0 ); }
@@ -2339,7 +2343,8 @@ static void scrub_verify_one_sector(struct scrub_stripe *stripe, }/* Verify specified sectors of a stripe. */ -void scrub_verify_one_stripe (struct scrub_stripe *stripe,unsigned long bitmap) +static void scrub_verify_one_stripe (struct scrub_stripe *stripe, +unsigned long bitmap) {struct btrfs_fs_info *fs_info = stripe->bg->fs_info; const unsigned int sectors_per_tree = fs_info->nodesize >>
@@ -2353,6 +2358,207 @@ void scrub_verify_one_stripe(struct scrub_stripe *stripe, unsigned long bitmap) } } +static int calc_sector_number (struct scrub_stripe *stripe, +struct bio_vec *first_bvec) +{ +int i; + +for (i =0 ; i < stripe->nr_sectors; i++) { +if (scrub_stripe_get_page (stripe, i) == first_bvec->bv_page && +scrub_stripe_get_page_offset (stripe, i) == first_bvec->bv_offset) +break ; + } +ASSERT (i < stripe->nr_sectors); +return i; +} + +/* +* Repair read is different to the regular read by: +* +* - Only reads the failed sectors +* - May have extra blocksize limits +*/ +static void scrub_repair_read_endio (struct btrfs_bio *bbio) +{ +struct scrub_stripe *stripe = bbio->private; +struct btrfs_fs_info *fs_info = stripe->bg->fs_info; +struct bio_vec *bvec; +int sector_nr =calc_sector_number (stripe, +bio_first_bvec_all (&bbio->bio)); +int bio_size =0 ; +int i; + +ASSERT (sector_nr < stripe->nr_sectors); + +bio_for_each_bvec_all (bvec, &bbio->bio, i) + bio_size += bvec->bv_len; + +if (bbio->bio.bi_status) { +bitmap_set (&stripe->io_error_bitmap, sector_nr, + bio_size >> fs_info->sectorsize_bits); +bitmap_set (&stripe->error_bitmap, sector_nr, + bio_size >> fs_info->sectorsize_bits); + }else { +bitmap_clear (&stripe->io_error_bitmap, sector_nr, + bio_size >> fs_info->sectorsize_bits); + } +bio_put (&bbio->bio); +if (atomic_dec_and_test (&stripe->pending_io)) +wake_up (&stripe->io_wait); +} + +static int calc_next_mirror (int mirror,int num_copies) +{ +ASSERT (mirror <= num_copies); +return (mirror +1 > num_copies) ?1 : mirror +1 ; +} + +static void scrub_stripe_submit_repair_read (struct scrub_stripe *stripe, +int mirror,int blocksize, +bool wait) +{ +struct btrfs_fs_info *fs_info = stripe->bg->fs_info; +struct btrfs_bio *bbio =NULL ; +const unsigned long old_error_bitmap = stripe->error_bitmap; +int i; + +ASSERT (stripe->mirror_num >=1 ); +ASSERT (atomic_read (&stripe->pending_io) ==0 ); + +for_each_set_bit (i, &old_error_bitmap, stripe->nr_sectors) { +struct page *page; +int pgoff; +int ret; + + page =scrub_stripe_get_page (stripe, i); + pgoff =scrub_stripe_get_page_offset (stripe, i); + +/* The current sector can not be merged, submit the bio. */ +if (bbio && ((i >0 && !test_bit (i -1 , &stripe->error_bitmap)) || + bbio->bio.bi_iter.bi_size >= blocksize)) { +ASSERT (bbio->bio.bi_iter.bi_size); +atomic_inc (&stripe->pending_io); +btrfs_submit_scrub_read (bbio, mirror); +if (wait) +wait_scrub_stripe_io (stripe); + bbio =NULL ; + } + +if (!bbio) { + bbio =btrfs_scrub_bio_alloc (REQ_OP_READ , fs_info, + scrub_repair_read_endio, stripe); + bbio->bio.bi_iter.bi_sector = (stripe->logical + + (i << fs_info->sectorsize_bits)) >>SECTOR_SHIFT ; + } + + ret =bio_add_page (&bbio->bio, page, fs_info->sectorsize, pgoff); +ASSERT (ret == fs_info->sectorsize); + } +if (bbio) { +ASSERT (bbio->bio.bi_iter.bi_size); +atomic_inc (&stripe->pending_io); +btrfs_submit_scrub_read (bbio, mirror); +if (wait) +wait_scrub_stripe_io (stripe); + } +} + +/* +* The main entrance for all read related scrub work, including: +* +* - Wait for the initial read to finish +* - Verify and locate any bad sectors +* - Go through the remaining mirrors and try to read as large blocksize as +* possible +* +* - Go through all mirrors (including the failed mirror) sector-by-sector +* +* Writeback does not happen here, they need extra synchronization. +*/ +static void scrub_stripe_read_repair_worker (struct work_struct *work) +{ + struct scrub_stripe *stripe = container_of(work, struct scrub_stripe, + work); +struct btrfs_fs_info *fs_info = stripe->bg->fs_info; +int num_copies =btrfs_num_copies (fs_info, stripe->bg->start, + stripe->bg->length); +int mirror; +int i; + +ASSERT (stripe->mirror_num >0 ); + +wait_scrub_stripe_io (stripe); +scrub_verify_one_stripe (stripe, stripe->extent_sector_bitmap); +/* Save the initial failed bitmap for later repair and report usage. */ + stripe->init_error_bitmap = stripe->error_bitmap; + +if (bitmap_empty (&stripe->init_error_bitmap, stripe->nr_sectors)) + goto out; + +/* +* Try all remaining mirrors. +* +* Here we still try read as large block as possible, as this is faster +* and we have extra safe nets to rely on. +*/ +for (mirror =calc_next_mirror (stripe->mirror_num, num_copies); + mirror != stripe->mirror_num; + mirror =calc_next_mirror (mirror, num_copies)) { +const unsigned long old_error_bitmap = stripe->error_bitmap; + +scrub_stripe_submit_repair_read (stripe, mirror, +BTRFS_STRIPE_LEN , false); +wait_scrub_stripe_io (stripe); +scrub_verify_one_stripe (stripe, old_error_bitmap); +if (bitmap_empty (&stripe->error_bitmap, stripe->nr_sectors)) + goto out; + } + +/* +* Last safenet, try re-check all mirrors, including the failed one, +* sector-by-sector. +* +* As if one sector failed the drive's internal csum, the whole read +* containing the offending sector would be marked error. +* Thus here we do sector-by-sector read. +* +* This can be slow, thus we only try it as the last resort. +*/ + +for (i =0 , mirror = stripe->mirror_num; i < num_copies; + i++, mirror =calc_next_mirror (mirror, num_copies)) { +const unsigned long old_error_bitmap = stripe->error_bitmap; + +scrub_stripe_submit_repair_read (stripe, mirror, + fs_info->sectorsize, true); +wait_scrub_stripe_io (stripe); +scrub_verify_one_stripe (stripe, old_error_bitmap); +if (bitmap_empty (&stripe->error_bitmap, stripe->nr_sectors)) + goto out; + } +out: +set_bit (SCRUB_STRIPE_FLAG_REPAIR_DONE , &stripe->state); +wake_up (&stripe->repair_wait); +} + +void scrub_read_endio (struct btrfs_bio *bbio) +{ +struct scrub_stripe *stripe = bbio->private; + +if (bbio->bio.bi_status) { +bitmap_set (&stripe->io_error_bitmap,0 , stripe->nr_sectors); +bitmap_set (&stripe->error_bitmap,0 , stripe->nr_sectors); + }else { +bitmap_clear (&stripe->io_error_bitmap,0 , stripe->nr_sectors); + } +bio_put (&bbio->bio); +if (atomic_dec_and_test (&stripe->pending_io)) { +wake_up (&stripe->io_wait); +INIT_WORK (&stripe->work, scrub_stripe_read_repair_worker); +queue_work (stripe->bg->fs_info->scrub_workers, &stripe->work); + } +} +static int scrub_checksum_tree_block (struct scrub_block *sblock) {struct scrub_ctx *sctx = sblock->sctx;
fs/btrfs/scrub.h +1 -2
@@ -19,11 +19,10 @@ int btrfs_scrub_progress(struct btrfs_fs_info *fs_info, u64 devid,*/ struct scrub_stripe ;int init_scrub_stripe (struct btrfs_fs_info *fs_info,struct scrub_stripe *stripe); -void wait_scrub_stripe_io (struct scrub_stripe *stripe);int scrub_find_fill_first_stripe (struct btrfs_block_group *bg,struct btrfs_device *dev,u64 physical,int mirror_num,u64 logical_start,u32 logical_len,struct scrub_stripe *stripe); -void scrub_verify_one_stripe (struct scrub_stripe *stripe,unsigned long bitmap); +void scrub_read_endio (struct btrfs_bio *bbio);#endif
Signature · 1 line
2.39.2
PATCH v5 10/13 btrfs: scrub: introduce a writeback helper for scrub_stripe
In reply to Qu WenruoAdd a new helper, scrub_write_sectors(), to submit write bios for specified sectors to the target disk
There are several differences compared to read path:
- Utilize btrfs_submit_scrub_write()
Now we still rely on the @mirror_num based writeback, but the requirement is also a little different than regular writeback or read, thus we have to call btrfs_submit_scrub_write().
- We can not write the full stripe back
We can only write the sectors we have.
There will be two call sites later, one for repaired sectors, one for all utilized sectors of dev-replace.
Thus the callers should specify their own write_bitmap.
This function only submit the bios, will not wait for them unless for zoned case.
Caller must explicitly wait for the IO to finish.
--- fs/btrfs/scrub.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/scrub.h | 3 ++ 2 files changed, 98 insertions(+)
fs/btrfs/scrub.c +95 -0
@@ -152,6 +152,12 @@ struct scrub_stripe {unsigned long csum_error_bitmap;unsigned long meta_error_bitmap; +/* For writeback (repair or replace) error report. */ +unsigned long write_error_bitmap; + +/* Writeback can be concurrent, thus we need to protect the bitmap. */ +spinlock_t write_error_lock; +/* * Checksum for the whole stripe if this stripe is inside a data block * group.
@@ -386,6 +392,7 @@ int init_scrub_stripe(struct btrfs_fs_info *fs_info, struct scrub_stripe *stripeinit_waitqueue_head (&stripe->io_wait);init_waitqueue_head (&stripe->repair_wait);atomic_set (&stripe->pending_io,0 ); +spin_lock_init (&stripe->write_error_lock); ret =btrfs_alloc_page_array (SCRUB_STRIPE_PAGES , stripe->pages);if (ret <0 )
@@ -2559,6 +2566,94 @@ void scrub_read_endio(struct btrfs_bio *bbio) } } +static void scrub_write_endio (struct btrfs_bio *bbio) +{ +struct scrub_stripe *stripe = bbio->private; +struct btrfs_fs_info *fs_info = stripe->bg->fs_info; +struct bio_vec *bvec; +unsigned long flags; +int sector_nr =calc_sector_number (stripe,bio_first_bvec_all (&bbio->bio)); +unsigned int bio_size =0 ; +int i; + +bio_for_each_bvec_all (bvec, &bbio->bio, i) + bio_size += bvec->bv_len; + +if (bbio->bio.bi_status) { +spin_lock_irqsave (&stripe->write_error_lock, flags); +bitmap_set (&stripe->write_error_bitmap, sector_nr, + bio_size >> fs_info->sectorsize_bits); +spin_unlock_irqrestore (&stripe->write_error_lock, flags); + } +bio_put (&bbio->bio); + +if (atomic_dec_and_test (&stripe->pending_io)) +wake_up (&stripe->io_wait); +} + +/* +* Submit the write bio(s) for the sectors specified by @write_bitmap. +* +* Here we utilize btrfs_submit_scrub_write(), which has some extra benefits: +* +* - Only needs logical bytenr and mirror_num +* Just like the scrub read path +* +* - Would only result writes to the specified mirror +* Unlike the regular writeback path, which would write back to all stripes +* +* - Handle dev-replace and read-repair writeback differently +*/ +void scrub_write_sectors (struct scrub_ctx *sctx, +struct scrub_stripe *stripe, +unsigned long write_bitmap,bool dev_replace) +{ +struct btrfs_fs_info *fs_info = stripe->bg->fs_info; +struct btrfs_bio *bbio =NULL ; +bool zoned =btrfs_is_zoned (fs_info); +int sector_nr; + +for_each_set_bit (sector_nr, &write_bitmap, stripe->nr_sectors) { +struct page *page =scrub_stripe_get_page (stripe, sector_nr); +unsigned int pgoff =scrub_stripe_get_page_offset (stripe, + sector_nr); +int ret; + +/* We should only writeback sectors covered by an extent. */ +ASSERT (test_bit (sector_nr, &stripe->extent_sector_bitmap)); + +/* Can not merge with previous sector, submit the current one. */ +if (bbio && sector_nr && !test_bit (sector_nr -1 , &write_bitmap)) { +fill_writer_pointer_gap (sctx, stripe->physical + + (sector_nr << fs_info->sectorsize_bits)); +atomic_inc (&stripe->pending_io); +btrfs_submit_scrub_write (bbio, stripe->mirror_num, + dev_replace); +/* For zoned writeback, queue depth must be 1. */ +if (zoned) +wait_scrub_stripe_io (stripe); + bbio =NULL ; + } +if (!bbio) { + bbio =btrfs_scrub_bio_alloc (REQ_OP_WRITE , fs_info, + scrub_write_endio, stripe); + bbio->bio.bi_iter.bi_sector = (stripe->logical + + (sector_nr << fs_info->sectorsize_bits)) >> +SECTOR_SHIFT ; + } + ret =bio_add_page (&bbio->bio, page, fs_info->sectorsize, pgoff); +ASSERT (ret == fs_info->sectorsize); + } +if (bbio) { +fill_writer_pointer_gap (sctx, bbio->bio.bi_iter.bi_sector << +SECTOR_SHIFT ); +atomic_inc (&stripe->pending_io); +btrfs_submit_scrub_write (bbio, stripe->mirror_num, dev_replace); +if (zoned) +wait_scrub_stripe_io (stripe); + } +} +static int scrub_checksum_tree_block (struct scrub_block *sblock) {struct scrub_ctx *sctx = sblock->sctx;
fs/btrfs/scrub.h +3 -0
@@ -24,5 +24,8 @@ int scrub_find_fill_first_stripe(struct btrfs_block_group *bg, int mirror_num, u64 logical_start, u32 logical_len, struct scrub_stripe *stripe);void scrub_read_endio (struct btrfs_bio *bbio); +void scrub_write_sectors (struct scrub_ctx *sctx, +struct scrub_stripe *stripe, +unsigned long write_bitmap,bool dev_replace);#endif
Signature · 1 line
2.39.2
PATCH v5 11/13 btrfs: scrub: introduce error reporting functionality for scrub_stripe
In reply to Qu WenruoThe new helper, scrub_stripe_report_errors(), will report the result of the scrub to dmesg.
The main reporting is done by introducing a new helper, scrub_print_common_warning(), which is mostly the same content from scrub_print_wanring(), but without the need for a scrub_block.
Since we're reporting the errors, it's the perfect timing to update the scrub stat too.
--- fs/btrfs/scrub.c | 167 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 158 insertions(+), 9 deletions(-)
fs/btrfs/scrub.c +158 -9
@@ -105,6 +105,7 @@ enum scrub_stripe_flags {* Represent one continuous range with a length of BTRFS_STRIPE_LEN. */ struct scrub_stripe { +struct scrub_ctx *sctx;struct btrfs_block_group *bg;struct page *pages[SCRUB_STRIPE_PAGES ];
@@ -119,6 +120,13 @@ struct scrub_stripe {/* Should be BTRFS_STRIPE_LEN / sectorsize. */ u16 nr_sectors; +/* +* How many data/meta extents are in this stripe. +* Only for scrub stat report purpose. +*/ +u16 nr_data_extents; +u16 nr_meta_extents; +atomic_t pending_io;wait_queue_head_t io_wait;wait_queue_head_t repair_wait;
@@ -377,6 +385,7 @@ static void release_scrub_stripe(struct scrub_stripe *stripe)kfree (stripe->csums); stripe->sectors =NULL ; stripe->csums =NULL ; + stripe->sctx =NULL ; stripe->state =0 ; }
@@ -1046,9 +1055,9 @@ static int scrub_print_warning_inode(u64 inum, u64 offset, u64 num_bytes,return 0 ; } -static void scrub_print_warning (const char *errstr,struct scrub_block *sblock) +static void scrub_print_common_warning (const char *errstr,struct btrfs_device *dev, +bool is_super,u64 logical,u64 physical) { -struct btrfs_device *dev;struct btrfs_fs_info *fs_info;struct btrfs_path *path;struct btrfs_key found_key;
@@ -1062,22 +1071,20 @@ static void scrub_print_warning(const char *errstr, struct scrub_block *sblock)u8 ref_level =0 ;int ret; -WARN_ON (sblock->sector_count <1 ); - dev = sblock->dev; - fs_info = sblock->sctx->fs_info; + fs_info = dev->fs_info;/* Super block error, no need to search extent tree. */ -if (sblock->sectors[0 ]->flags &BTRFS_EXTENT_FLAG_SUPER ) { +if (is_super) {btrfs_warn_in_rcu (fs_info,"%s on device %s, physical %llu" , - errstr,btrfs_dev_name (dev), sblock->physical); + errstr,btrfs_dev_name (dev), physical);return ; } path =btrfs_alloc_path ();if (!path)return ; - swarn.physical = sblock->physical; - swarn.logical = sblock->logical; + swarn.physical = physical; + swarn.logical = logical; swarn.errstr = errstr; swarn.dev =NULL ;
@@ -1126,6 +1133,13 @@ static void scrub_print_warning(const char *errstr, struct scrub_block *sblock)btrfs_free_path (path); } +static void scrub_print_warning (const char *errstr,struct scrub_block *sblock) +{ +scrub_print_common_warning (errstr, sblock->dev, + sblock->sectors[0 ]->flags &BTRFS_EXTENT_FLAG_SUPER , + sblock->logical, sblock->physical); +} +static inline void scrub_get_recover (struct scrub_recover *recover) {refcount_inc (&recover->refs);
@@ -2470,6 +2484,132 @@ static void scrub_stripe_submit_repair_read(struct scrub_stripe *stripe, } } +static void scrub_stripe_report_errors (struct scrub_ctx *sctx, +struct scrub_stripe *stripe) +{ + static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, + DEFAULT_RATELIMIT_BURST); +struct btrfs_fs_info *fs_info = sctx->fs_info; +struct btrfs_device *dev =NULL ; +u64 physical =0 ; +int nr_data_sectors =0 ; +int nr_meta_sectors =0 ; +int nr_nodatacsum_sectors =0 ; +int nr_repaired_sectors =0 ; +int sector_nr; + +/* +* Init needed infos for error reporting. +* +* Although our scrub_stripe infrastucture is mostly based on btrfs_submit_bio() +* thus no need for dev/physical, error reporting still needs dev and physical. +*/ +if (!bitmap_empty (&stripe->init_error_bitmap, stripe->nr_sectors)) { +u64 mapped_len = fs_info->sectorsize; +struct btrfs_io_context *bioc =NULL ; +int stripe_index = stripe->mirror_num -1 ; +int ret; + +/* For scrub, our mirror_num should always start at 1. */ +ASSERT (stripe->mirror_num >=1 ); + ret =btrfs_map_sblock (fs_info,BTRFS_MAP_GET_READ_MIRRORS , + stripe->logical, &mapped_len, &bioc); +/* +* If we failed, dev will be NULL, and later detailed reports +* will just be skipped. +*/ +if (ret <0 ) + goto skip; + physical = bioc->stripes[stripe_index].physical; + dev = bioc->stripes[stripe_index].dev; +btrfs_put_bioc (bioc); + } + +skip: +for_each_set_bit (sector_nr, &stripe->extent_sector_bitmap, + stripe->nr_sectors) { +bool repaired = false; + +if (stripe->sectors[sector_nr].is_metadata) { + nr_meta_sectors++; + }else { + nr_data_sectors++; +if (!stripe->sectors[sector_nr].csum) + nr_nodatacsum_sectors++; + } + +if (test_bit (sector_nr, &stripe->init_error_bitmap) && + !test_bit (sector_nr, &stripe->error_bitmap)) { + nr_repaired_sectors++; + repaired = true; + } + +/* Good sector from the beginning, nothing need to be done. */ +if (!test_bit (sector_nr, &stripe->init_error_bitmap)) +continue ; + +/* +* Report error for the corrupted sectors. +* If repaired, just output the message of repaired message. +*/ +if (repaired) { +if (dev) +btrfs_err_rl_in_rcu (fs_info, +"fixed up error at logical %llu on dev %s physical %llu" , + stripe->logical,btrfs_dev_name (dev), + physical); +else +btrfs_err_rl_in_rcu (fs_info, +"fixed up error at logical %llu on mirror %u" , + stripe->logical, stripe->mirror_num); +continue ; + } + +/* The remaining are all for unrepaired. */ +if (dev) +btrfs_err_rl_in_rcu (fs_info, +"unable to fixup (regular) error at logical %llu on dev %s physical %llu" , + stripe->logical,btrfs_dev_name (dev), + physical); +else +btrfs_err_rl_in_rcu (fs_info, +"unable to fixup (regular) error at logical %llu on mirror %u" , + stripe->logical, stripe->mirror_num); + +if (test_bit (sector_nr, &stripe->io_error_bitmap)) +if (__ratelimit (&rs) && dev) +scrub_print_common_warning ("i/o error" , dev, false, + stripe->logical, physical); +if (test_bit (sector_nr, &stripe->csum_error_bitmap)) +if (__ratelimit (&rs) && dev) +scrub_print_common_warning ("checksum error" , dev, false, + stripe->logical, physical); +if (test_bit (sector_nr, &stripe->meta_error_bitmap)) +if (__ratelimit (&rs) && dev) +scrub_print_common_warning ("header error" , dev, false, + stripe->logical, physical); + } + +spin_lock (&sctx->stat_lock); + sctx->stat.data_extents_scrubbed += stripe->nr_data_extents; + sctx->stat.tree_extents_scrubbed += stripe->nr_meta_extents; + sctx->stat.data_bytes_scrubbed += nr_data_sectors << + fs_info->sectorsize_bits; + sctx->stat.tree_bytes_scrubbed += nr_meta_sectors << + fs_info->sectorsize_bits; + sctx->stat.no_csum += nr_nodatacsum_sectors; + sctx->stat.read_errors += +bitmap_weight (&stripe->io_error_bitmap, stripe->nr_sectors); + sctx->stat.csum_errors += +bitmap_weight (&stripe->csum_error_bitmap, stripe->nr_sectors); + sctx->stat.verify_errors += +bitmap_weight (&stripe->meta_error_bitmap, stripe->nr_sectors); + sctx->stat.uncorrectable_errors += +bitmap_weight (&stripe->error_bitmap, stripe->nr_sectors); + sctx->stat.corrected_errors += nr_repaired_sectors; +spin_unlock (&sctx->stat_lock); +} +/* * The main entrance for all read related scrub work, including: *
@@ -2544,6 +2684,7 @@ static void scrub_stripe_read_repair_worker(struct work_struct *work) goto out; } out: +scrub_stripe_report_errors (stripe->sctx, stripe);set_bit (SCRUB_STRIPE_FLAG_REPAIR_DONE , &stripe->state);wake_up (&stripe->repair_wait); }
@@ -4212,6 +4353,10 @@ int scrub_find_fill_first_stripe(struct btrfs_block_group *bg, goto out;get_extent_info (&path, &extent_start, &extent_len, &extent_flags, &extent_gen); +if (extent_flags &BTRFS_EXTENT_FLAG_TREE_BLOCK ) + stripe->nr_meta_extents++; +if (extent_flags &BTRFS_EXTENT_FLAG_DATA ) + stripe->nr_data_extents++; cur_logical =max (extent_start, cur_logical);/*
@@ -4245,6 +4390,10 @@ int scrub_find_fill_first_stripe(struct btrfs_block_group *bg, }get_extent_info (&path, &extent_start, &extent_len, &extent_flags, &extent_gen); +if (extent_flags &BTRFS_EXTENT_FLAG_TREE_BLOCK ) + stripe->nr_meta_extents++; +if (extent_flags &BTRFS_EXTENT_FLAG_DATA ) + stripe->nr_data_extents++;fill_one_extent_info (fs_info, stripe, extent_start, extent_len, extent_flags, extent_gen); cur_logical = extent_start + extent_len;
Signature · 1 line
2.39.2
PATCH v5 12/13 btrfs: scrub: introduce the helper to queue a stripe for scrub
In reply to Qu WenruoThe new helper, queue_scrub_stripe(), would try to queue a stripe for scrub.
If all stripes are already in use, we will submit all the existing stripes and wait them to finish.
Currently we would queue up to 8 stripes, to enlarge the blocksize to 512KiB to improve the performance.
--- fs/btrfs/scrub.c | 181 ++++++++++++++++++++++++++++++++++++++++++++--- fs/btrfs/scrub.h | 13 ++-- 2 files changed, 176 insertions(+), 18 deletions(-)
fs/btrfs/scrub.c +172 -9
@@ -50,6 +50,7 @@ struct scrub_ctx;*/ #define SCRUB_SECTORS_PER_BIO 32/* 128KiB per bio for 4KiB pages */ #define SCRUB_BIOS_PER_SCTX 64/* 8MiB per device in flight for 4KiB pages */ +#define SCRUB_STRIPES_PER_SCTX 8/* That would be 8 64K stripe per-device. */ /* * The following value times PAGE_SIZE needs to be large enough to match the
@@ -277,9 +278,11 @@ struct scrub_parity {struct scrub_ctx {struct scrub_bio *bios[SCRUB_BIOS_PER_SCTX ]; +struct scrub_stripe stripes[SCRUB_STRIPES_PER_SCTX ];struct btrfs_fs_info *fs_info;int first_free;int curr; +int cur_stripe;atomic_t bios_in_flight;atomic_t workers_pending;spinlock_t list_lock;
@@ -389,7 +392,8 @@ static void release_scrub_stripe(struct scrub_stripe *stripe) stripe->state =0 ; } -int init_scrub_stripe (struct btrfs_fs_info *fs_info,struct scrub_stripe *stripe) +static int init_scrub_stripe (struct btrfs_fs_info *fs_info, +struct scrub_stripe *stripe) {int ret;
@@ -895,6 +899,9 @@ static noinline_for_stack void scrub_free_ctx(struct scrub_ctx *sctx)kfree (sbio); } +for (i =0 ; i <SCRUB_STRIPES_PER_SCTX ; i++) +release_scrub_stripe (&sctx->stripes[i]); +kfree (sctx->wr_curr_bio);scrub_free_csums (sctx);kfree (sctx);
@@ -939,6 +946,14 @@ static noinline_for_stack struct scrub_ctx *scrub_setup_ctx(else sctx->bios[i]->next_free =-1 ; } +for (i =0 ; i <SCRUB_STRIPES_PER_SCTX ; i++) { +int ret; + + ret =init_scrub_stripe (fs_info, &sctx->stripes[i]); +if (ret <0 ) + goto nomem; + sctx->stripes[i].sctx = sctx; + } sctx->first_free =0 ;atomic_set (&sctx->bios_in_flight,0 );atomic_set (&sctx->workers_pending,0 );
@@ -2689,7 +2704,7 @@ static void scrub_stripe_read_repair_worker(struct work_struct *work)wake_up (&stripe->repair_wait); } -void scrub_read_endio (struct btrfs_bio *bbio) +static void scrub_read_endio (struct btrfs_bio *bbio) {struct scrub_stripe *stripe = bbio->private;
@@ -2745,9 +2760,9 @@ static void scrub_write_endio(struct btrfs_bio *bbio)* * - Handle dev-replace and read-repair writeback differently */ -void scrub_write_sectors (struct scrub_ctx *sctx, -struct scrub_stripe *stripe, -unsigned long write_bitmap,bool dev_replace) +static void scrub_write_sectors (struct scrub_ctx *sctx, +struct scrub_stripe *stripe, +unsigned long write_bitmap,bool dev_replace) {struct btrfs_fs_info *fs_info = stripe->bg->fs_info;struct btrfs_bio *bbio =NULL ;
@@ -4318,10 +4333,11 @@ static void scrub_stripe_reset_bitmaps(struct scrub_stripe *stripe)* Return >0 if there is no such stripe in the specified range. * Return <0 for error. */ -int scrub_find_fill_first_stripe (struct btrfs_block_group *bg, -struct btrfs_device *dev,u64 physical, -int mirror_num,u64 logical_start, -u32 logical_len,struct scrub_stripe *stripe) +static int scrub_find_fill_first_stripe (struct btrfs_block_group *bg, +struct btrfs_device *dev,u64 physical, +int mirror_num,u64 logical_start, +u32 logical_len, +struct scrub_stripe *stripe) {struct btrfs_fs_info *fs_info = bg->fs_info;struct btrfs_root *extent_root =btrfs_extent_root (fs_info, bg->start);
@@ -4433,6 +4449,153 @@ int scrub_find_fill_first_stripe(struct btrfs_block_group *bg,return ret; } +static void scrub_reset_stripe (struct scrub_stripe *stripe) +{ +scrub_stripe_reset_bitmaps (stripe); + + stripe->nr_meta_extents =0 ; + stripe->nr_data_extents =0 ; + stripe->state =0 ; + +for (int i =0 ; i < stripe->nr_sectors; i++) { + stripe->sectors[i].is_metadata = false; + stripe->sectors[i].csum =NULL ; + stripe->sectors[i].generation =0 ; + } +} + +static void scrub_submit_initial_read (struct scrub_ctx *sctx, +struct scrub_stripe *stripe) +{ +struct btrfs_fs_info *fs_info = sctx->fs_info; +struct btrfs_bio *bbio; +int mirror = stripe->mirror_num; + +ASSERT (stripe->bg); +ASSERT (stripe->mirror_num >0 ); +ASSERT (test_bit (SCRUB_STRIPE_FLAG_INITIALIZED , &stripe->state)); + + bbio =btrfs_scrub_bio_alloc (REQ_OP_READ , fs_info, scrub_read_endio, + stripe); + +/* Read the whole stripe. */ + bbio->bio.bi_iter.bi_sector = stripe->logical >>SECTOR_SHIFT ; +for (int i =0 ; i <BTRFS_STRIPE_LEN >>PAGE_SHIFT ; i++) { +int ret; + + ret =bio_add_page (&bbio->bio, stripe->pages[i],PAGE_SIZE ,0 ); +/* We should have allocated enough bio vectors. */ +ASSERT (ret ==PAGE_SIZE ); + } +atomic_inc (&stripe->pending_io); + +/* +* For dev-replace, either user asks to avoid the source dev, or +* the device is missing, we try the next mirror instead. +*/ +if (sctx->is_dev_replace && + (fs_info->dev_replace.cont_reading_from_srcdev_mode == +BTRFS_DEV_REPLACE_ITEM_CONT_READING_FROM_SRCDEV_MODE_AVOID || + !stripe->dev->bdev)) { +int num_copies =btrfs_num_copies (fs_info, stripe->bg->start, + stripe->bg->length); + mirror =calc_next_mirror (mirror, num_copies); + } +btrfs_submit_scrub_read (bbio, mirror); +} + +static void flush_scrub_stripes (struct scrub_ctx *sctx) +{ +struct btrfs_fs_info *fs_info = sctx->fs_info; +struct scrub_stripe *stripe; +const int nr_stripes = sctx->cur_stripe; + +if (!nr_stripes) +return ; + +ASSERT (test_bit (SCRUB_STRIPE_FLAG_INITIALIZED , &sctx->stripes[0 ].state)); +for (int i =0 ; i < nr_stripes; i++) { + stripe = &sctx->stripes[i]; +scrub_submit_initial_read (sctx, stripe); + } + +for (int i =0 ; i < nr_stripes; i++) { + stripe = &sctx->stripes[i]; + +wait_event (stripe->repair_wait, +test_bit (SCRUB_STRIPE_FLAG_REPAIR_DONE , + &stripe->state)); + } + +/* +* Submit the repaired sectors. +* For zoned case, we can not do repair in-place, but +* queue the bg to be relocated. +*/ +if (btrfs_is_zoned (fs_info) && + !bitmap_empty (&stripe->init_error_bitmap, stripe->nr_sectors)) { +btrfs_repair_one_zone (fs_info, sctx->stripes[0 ].bg->start); + }else { +for (int i =0 ; i < nr_stripes; i++) { +unsigned long repaired; + + stripe = &sctx->stripes[i]; + +bitmap_andnot (&repaired, &stripe->init_error_bitmap, + &stripe->error_bitmap, stripe->nr_sectors); +scrub_write_sectors (sctx, stripe, repaired, false); + } + } + +/* Submit for dev-replace. */ +if (sctx->is_dev_replace) { +for (int i =0 ; i < nr_stripes; i++) { +unsigned long good; + + stripe = &sctx->stripes[i]; + +ASSERT (stripe->dev == fs_info->dev_replace.srcdev); + +bitmap_andnot (&good, &stripe->extent_sector_bitmap, + &stripe->error_bitmap, stripe->nr_sectors); +scrub_write_sectors (sctx, stripe, good, true); + } + } + +/* Wait for above writebacks to finish. */ +for (int i =0 ; i < nr_stripes; i++) { + stripe = &sctx->stripes[i]; + +wait_scrub_stripe_io (stripe); +scrub_reset_stripe (stripe); + } + sctx->cur_stripe =0 ; +} + +int queue_scrub_stripe (struct scrub_ctx *sctx, +struct btrfs_block_group *bg, +struct btrfs_device *dev,int mirror_num, +u64 logical,u32 length,u64 physical) +{ +struct scrub_stripe *stripe; +int ret; + +/* No available slot, submit all stripes and wait for them. */ +if (sctx->cur_stripe >=SCRUB_STRIPES_PER_SCTX ) +flush_scrub_stripes (sctx); + + stripe = &sctx->stripes[sctx->cur_stripe]; + +/* We can queue one stripe using the remaining slot. */ +scrub_reset_stripe (stripe); + ret =scrub_find_fill_first_stripe (bg, dev, physical, mirror_num, + logical, length, stripe); +/* Either >0 as no more extent or <0 for error. */ +if (ret) +return ret; + sctx->cur_stripe++; +return 0 ; +}/* * Scrub one range which can only has simple mirror based profile.
fs/btrfs/scrub.h +4 -9
@@ -18,14 +18,9 @@ int btrfs_scrub_progress(struct btrfs_fs_info *fs_info, u64 devid,* static functions. */ struct scrub_stripe ; -int init_scrub_stripe (struct btrfs_fs_info *fs_info,struct scrub_stripe *stripe); -int scrub_find_fill_first_stripe (struct btrfs_block_group *bg, -struct btrfs_device *dev,u64 physical, -int mirror_num,u64 logical_start, -u32 logical_len,struct scrub_stripe *stripe); -void scrub_read_endio (struct btrfs_bio *bbio); -void scrub_write_sectors (struct scrub_ctx *sctx, -struct scrub_stripe *stripe, -unsigned long write_bitmap,bool dev_replace); +int queue_scrub_stripe (struct scrub_ctx *sctx, +struct btrfs_block_group *bg, +struct btrfs_device *dev,int mirror_num, +u64 logical,u32 length,u64 physical);#endif
Signature · 1 line
2.39.2
PATCH v5 13/13 btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure
In reply to Qu WenruoSwitch scrub_simple_mirror() to the new scrub_stripe infrastructure.
Since scrub_simple_mirror() is the core part of scrub (only RAID56 P/Q stripes doesn't utilize it), we can get rid of a big hunk of code, mostly scrub_extent() and scrub_sectors().
There is a functionality change:
- Scrub speed throttle now only affects read on the scrubbing device Writes (for repair and replace), and reads from other mirrors won't be limited by the limits.
--- fs/btrfs/scrub.c | 494 +++-------------------------------------------- fs/btrfs/scrub.h | 10 - 2 files changed, 30 insertions(+), 474 deletions(-)
fs/btrfs/scrub.c +30 -464
@@ -582,10 +582,6 @@ static void scrub_sector_get(struct scrub_sector *sector);static void scrub_sector_put (struct scrub_sector *sector);static void scrub_parity_get (struct scrub_parity *sparity);static void scrub_parity_put (struct scrub_parity *sparity); -static int scrub_sectors (struct scrub_ctx *sctx,u64 logical,u32 len, -u64 physical,struct btrfs_device *dev,u64 flags, -u64 gen,int mirror_num,u8 *csum, -u64 physical_for_dev_replace);static void scrub_bio_end_io (struct bio *bio);static void scrub_bio_end_io_worker (struct work_struct *work);static void scrub_block_complete (struct scrub_block *sblock);
@@ -2975,22 +2971,16 @@ static void scrub_sector_put(struct scrub_sector *sector)kfree (sector); } -/* -* Throttling of IO submission, bandwidth-limit based, the timeslice is 1 -* second. Limit can be set via /sys/fs/UUID/devinfo/devid/scrub_speed_max. -*/ -static void scrub_throttle (struct scrub_ctx *sctx) +static void scrub_throttle_dev_io (struct scrub_ctx *sctx, +struct btrfs_device *device, +unsigned int bio_size) {const int time_slice =1000 ; -struct scrub_bio *sbio; -struct btrfs_device *device;s64 delta;ktime_t now;u32 div;u64 bwlimit; - sbio = sctx->bios[sctx->curr]; - device = sbio->dev; bwlimit =READ_ONCE (device->scrub_speed_max);if (bwlimit ==0 )return ;
@@ -3012,7 +3002,7 @@ static void scrub_throttle(struct scrub_ctx *sctx)/* Still in the time to send? */ if (ktime_before (now, sctx->throttle_deadline)) {/* If current bio is within the limit, send it */ - sctx->throttle_sent += sbio->bio->bi_iter.bi_size; + sctx->throttle_sent += bio_size;if (sctx->throttle_sent <=div_u64 (bwlimit, div))return ;
@@ -3034,6 +3024,17 @@ static void scrub_throttle(struct scrub_ctx *sctx) sctx->throttle_deadline =0 ; } +/* +* Throttling of IO submission, bandwidth-limit based, the timeslice is 1 +* second. Limit can be set via /sys/fs/UUID/devinfo/devid/scrub_speed_max. +*/ +static void scrub_throttle (struct scrub_ctx *sctx) +{ +struct scrub_bio *sbio = sctx->bios[sctx->curr]; + +scrub_throttle_dev_io (sctx, sbio->dev, sbio->bio->bi_iter.bi_size); +} +static void scrub_submit (struct scrub_ctx *sctx) {struct scrub_bio *sbio;
@@ -3118,202 +3119,6 @@ static int scrub_add_sector_to_rd_bio(struct scrub_ctx *sctx,return 0 ; } -static void scrub_missing_raid56_end_io (struct bio *bio) -{ -struct scrub_block *sblock = bio->bi_private; -struct btrfs_fs_info *fs_info = sblock->sctx->fs_info; - -btrfs_bio_counter_dec (fs_info); -if (bio->bi_status) - sblock->no_io_error_seen =0 ; - -bio_put (bio); - -queue_work (fs_info->scrub_workers, &sblock->work); -} - -static void scrub_missing_raid56_worker (struct work_struct *work) -{ - struct scrub_block *sblock = container_of(work, struct scrub_block, work); -struct scrub_ctx *sctx = sblock->sctx; -struct btrfs_fs_info *fs_info = sctx->fs_info; -u64 logical; -struct btrfs_device *dev; - - logical = sblock->logical; - dev = sblock->dev; - -if (sblock->no_io_error_seen) -scrub_recheck_block_checksum (sblock); - -if (!sblock->no_io_error_seen) { -spin_lock (&sctx->stat_lock); - sctx->stat.read_errors++; -spin_unlock (&sctx->stat_lock); -btrfs_err_rl_in_rcu (fs_info, -"IO error rebuilding logical %llu for dev %s" , - logical,btrfs_dev_name (dev)); - }else if (sblock->header_error || sblock->checksum_error) { -spin_lock (&sctx->stat_lock); - sctx->stat.uncorrectable_errors++; -spin_unlock (&sctx->stat_lock); -btrfs_err_rl_in_rcu (fs_info, -"failed to rebuild valid logical %llu for dev %s" , - logical,btrfs_dev_name (dev)); - }else { -scrub_write_block_to_dev_replace (sblock); - } - -if (sctx->is_dev_replace && sctx->flush_all_writes) { -mutex_lock (&sctx->wr_lock); -scrub_wr_submit (sctx); -mutex_unlock (&sctx->wr_lock); - } - -scrub_block_put (sblock); -scrub_pending_bio_dec (sctx); -} - -static void scrub_missing_raid56_pages (struct scrub_block *sblock) -{ -struct scrub_ctx *sctx = sblock->sctx; -struct btrfs_fs_info *fs_info = sctx->fs_info; -u64 length = sblock->sector_count << fs_info->sectorsize_bits; -u64 logical = sblock->logical; -struct btrfs_io_context *bioc =NULL ; -struct bio *bio; -struct btrfs_raid_bio *rbio; -int ret; -int i; - -btrfs_bio_counter_inc_blocked (fs_info); - ret =btrfs_map_sblock (fs_info,BTRFS_MAP_GET_READ_MIRRORS , logical, - &length, &bioc); -if (ret || !bioc) - goto bioc_out; - -if (WARN_ON (!sctx->is_dev_replace || - !(bioc->map_type &BTRFS_BLOCK_GROUP_RAID56_MASK ))) { -/* -* We shouldn't be scrubbing a missing device. Even for dev -* replace, we should only get here for RAID 5/6. We either -* managed to mount something with no mirrors remaining or -* there's a bug in scrub_find_good_copy()/btrfs_map_block(). -*/ - goto bioc_out; - } - - bio =bio_alloc (NULL ,BIO_MAX_VECS ,REQ_OP_READ ,GFP_NOFS ); - bio->bi_iter.bi_sector = logical >>9 ; - bio->bi_private = sblock; - bio->bi_end_io = scrub_missing_raid56_end_io; - - rbio =raid56_alloc_missing_rbio (bio, bioc); -if (!rbio) - goto rbio_out; - -for (i =0 ; i < sblock->sector_count; i++) { -struct scrub_sector *sector = sblock->sectors[i]; - -raid56_add_scrub_pages (rbio,scrub_sector_get_page (sector), -scrub_sector_get_page_offset (sector), - sector->offset + sector->sblock->logical); - } - -INIT_WORK (&sblock->work, scrub_missing_raid56_worker); -scrub_block_get (sblock); -scrub_pending_bio_inc (sctx); -raid56_submit_missing_rbio (rbio); -btrfs_put_bioc (bioc); -return ; - -rbio_out: -bio_put (bio); -bioc_out: -btrfs_bio_counter_dec (fs_info); -btrfs_put_bioc (bioc); -spin_lock (&sctx->stat_lock); - sctx->stat.malloc_errors++; -spin_unlock (&sctx->stat_lock); -} - -static int scrub_sectors (struct scrub_ctx *sctx,u64 logical,u32 len, -u64 physical,struct btrfs_device *dev,u64 flags, -u64 gen,int mirror_num,u8 *csum, -u64 physical_for_dev_replace) -{ -struct scrub_block *sblock; -const u32 sectorsize = sctx->fs_info->sectorsize; -int index; - - sblock =alloc_scrub_block (sctx, dev, logical, physical, - physical_for_dev_replace, mirror_num); -if (!sblock) { -spin_lock (&sctx->stat_lock); - sctx->stat.malloc_errors++; -spin_unlock (&sctx->stat_lock); -return -ENOMEM ; - } - -for (index =0 ; len >0 ; index++) { -struct scrub_sector *sector; -/* -* Here we will allocate one page for one sector to scrub. -* This is fine if PAGE_SIZE == sectorsize, but will cost -* more memory for PAGE_SIZE > sectorsize case. -*/ -u32 l =min (sectorsize, len); - - sector =alloc_scrub_sector (sblock, logical); -if (!sector) { -spin_lock (&sctx->stat_lock); - sctx->stat.malloc_errors++; -spin_unlock (&sctx->stat_lock); -scrub_block_put (sblock); -return -ENOMEM ; - } - sector->flags = flags; - sector->generation = gen; -if (csum) { - sector->have_csum =1 ; -memcpy (sector->csum, csum, sctx->fs_info->csum_size); - }else { - sector->have_csum =0 ; - } - len -= l; - logical += l; - physical += l; - physical_for_dev_replace += l; - } - -WARN_ON (sblock->sector_count ==0 ); -if (test_bit (BTRFS_DEV_STATE_MISSING , &dev->dev_state)) { -/* -* This case should only be hit for RAID 5/6 device replace. See -* the comment in scrub_missing_raid56_pages() for details. -*/ -scrub_missing_raid56_pages (sblock); - }else { -for (index =0 ; index < sblock->sector_count; index++) { -struct scrub_sector *sector = sblock->sectors[index]; -int ret; - - ret =scrub_add_sector_to_rd_bio (sctx, sector); -if (ret) { -scrub_block_put (sblock); -return ret; - } - } - -if (flags &BTRFS_EXTENT_FLAG_SUPER ) -scrub_submit (sctx); - } - -/* last one frees, either here or in bio completion for last page */ -scrub_block_put (sblock); -return 0 ; -} -static void scrub_bio_end_io (struct bio *bio) {struct scrub_bio *sbio = bio->bi_private;
@@ -3498,179 +3303,6 @@ static int scrub_find_csum(struct scrub_ctx *sctx, u64 logical, u8 *csum)return 1 ; } -static bool should_use_device (struct btrfs_fs_info *fs_info, -struct btrfs_device *dev, -bool follow_replace_read_mode) -{ -struct btrfs_device *replace_srcdev = fs_info->dev_replace.srcdev; -struct btrfs_device *replace_tgtdev = fs_info->dev_replace.tgtdev; - -if (!dev->bdev) -return false; - -/* -* We're doing scrub/replace, if it's pure scrub, no tgtdev should be -* here. If it's replace, we're going to write data to tgtdev, thus -* the current data of the tgtdev is all garbage, thus we can not use -* it at all. -*/ -if (dev == replace_tgtdev) -return false; - -/* No need to follow replace read mode, any existing device is fine. */ -if (!follow_replace_read_mode) -return true; - -/* Need to follow the mode. */ -if (fs_info->dev_replace.cont_reading_from_srcdev_mode == -BTRFS_DEV_REPLACE_ITEM_CONT_READING_FROM_SRCDEV_MODE_AVOID ) -return dev != replace_srcdev; -return true; -} -static int scrub_find_good_copy (struct btrfs_fs_info *fs_info, -u64 extent_logical,u32 extent_len, -u64 *extent_physical, -struct btrfs_device **extent_dev, -int *extent_mirror_num) -{ -u64 mapped_length; -struct btrfs_io_context *bioc =NULL ; -int ret; -int i; - - mapped_length = extent_len; - ret =btrfs_map_block (fs_info,BTRFS_MAP_GET_READ_MIRRORS , - extent_logical, &mapped_length, &bioc,0 ); -if (ret || !bioc || mapped_length < extent_len) { -btrfs_put_bioc (bioc); -btrfs_err_rl (fs_info,"btrfs_map_block() failed for logical %llu: %d" , - extent_logical, ret); -return -EIO ; - } - -/* -* First loop to exclude all missing devices and the source device if -* needed. And we don't want to use target device as mirror either, as -* we're doing the replace, the target device range contains nothing. -*/ -for (i =0 ; i < bioc->num_stripes - bioc->replace_nr_stripes; i++) { -struct btrfs_io_stripe *stripe = &bioc->stripes[i]; - -if (!should_use_device (fs_info, stripe->dev, true)) -continue ; - goto found; - } -/* -* We didn't find any alternative mirrors, we have to break our replace -* read mode, or we can not read at all. -*/ -for (i =0 ; i < bioc->num_stripes - bioc->replace_nr_stripes; i++) { -struct btrfs_io_stripe *stripe = &bioc->stripes[i]; - -if (!should_use_device (fs_info, stripe->dev, false)) -continue ; - goto found; - } - -btrfs_err_rl (fs_info,"failed to find any live mirror for logical %llu" , - extent_logical); -return -EIO ; - -found: - *extent_physical = bioc->stripes[i].physical; - *extent_mirror_num = i +1 ; - *extent_dev = bioc->stripes[i].dev; -btrfs_put_bioc (bioc); -return 0 ; -} - -static bool scrub_need_different_mirror (struct scrub_ctx *sctx, -struct map_lookup *map, -struct btrfs_device *dev) -{ -/* -* For RAID56, all the extra mirrors are rebuilt from other P/Q, -* cannot utilize other mirrors directly. -*/ -if (map->type &BTRFS_BLOCK_GROUP_RAID56_MASK ) -return false; - -if (!dev->bdev) -return true; - -return sctx->fs_info->dev_replace.cont_reading_from_srcdev_mode == -BTRFS_DEV_REPLACE_ITEM_CONT_READING_FROM_SRCDEV_MODE_AVOID ; -} - -/* scrub extent tries to collect up to 64 kB for each bio */ -static int scrub_extent (struct scrub_ctx *sctx,struct map_lookup *map, -u64 logical,u32 len, -u64 physical,struct btrfs_device *dev,u64 flags, -u64 gen,int mirror_num) -{ -struct btrfs_device *src_dev = dev; -u64 src_physical = physical; -int src_mirror = mirror_num; -int ret; -u8 csum[BTRFS_CSUM_SIZE ]; -u32 blocksize; - -if (flags &BTRFS_EXTENT_FLAG_DATA ) { -if (map->type &BTRFS_BLOCK_GROUP_RAID56_MASK ) - blocksize =BTRFS_STRIPE_LEN ; -else - blocksize = sctx->fs_info->sectorsize; -spin_lock (&sctx->stat_lock); - sctx->stat.data_extents_scrubbed++; - sctx->stat.data_bytes_scrubbed += len; -spin_unlock (&sctx->stat_lock); - }else if (flags &BTRFS_EXTENT_FLAG_TREE_BLOCK ) { -if (map->type &BTRFS_BLOCK_GROUP_RAID56_MASK ) - blocksize =BTRFS_STRIPE_LEN ; -else - blocksize = sctx->fs_info->nodesize; -spin_lock (&sctx->stat_lock); - sctx->stat.tree_extents_scrubbed++; - sctx->stat.tree_bytes_scrubbed += len; -spin_unlock (&sctx->stat_lock); - }else { - blocksize = sctx->fs_info->sectorsize; -WARN_ON (1 ); - } - -/* -* For dev-replace case, we can have @dev being a missing device, or -* we want to avoid reading from the source device if possible. -*/ -if (sctx->is_dev_replace &&scrub_need_different_mirror (sctx, map, dev)) { - ret =scrub_find_good_copy (sctx->fs_info, logical, len, - &src_physical, &src_dev, &src_mirror); -if (ret <0 ) -return ret; - } -while (len) { -u32 l =min (len, blocksize); -int have_csum =0 ; - -if (flags &BTRFS_EXTENT_FLAG_DATA ) { -/* push csums to sbio */ - have_csum =scrub_find_csum (sctx, logical, csum); -if (have_csum ==0 ) - ++sctx->stat.no_csum; - } - ret =scrub_sectors (sctx, logical, l, src_physical, src_dev, - flags, gen, src_mirror, - have_csum ? csum :NULL , physical); -if (ret) -return ret; - len -= l; - logical += l; - physical += l; - src_physical += l; - } -return 0 ; -} - static int scrub_sectors_for_parity(struct scrub_parity *sparity, u64 logical, u32 len, u64 physical, struct btrfs_device *dev,
@@ -4253,20 +3885,6 @@ static noinline_for_stack int scrub_raid56_parity(struct scrub_ctx *sctx,return ret <0 ? ret :0 ; } -static void sync_replace_for_zoned (struct scrub_ctx *sctx) -{ -if (!btrfs_is_zoned (sctx->fs_info)) -return ; - - sctx->flush_all_writes = true; -scrub_submit (sctx); -mutex_lock (&sctx->wr_lock); -scrub_wr_submit (sctx); -mutex_unlock (&sctx->wr_lock); - -wait_event (sctx->list_wait,atomic_read (&sctx->bios_in_flight) ==0 ); -} -static int sync_write_pointer_for_zoned (struct scrub_ctx *sctx,u64 logical,u64 physical,u64 physical_end) {
@@ -4514,6 +4132,9 @@ static void flush_scrub_stripes(struct scrub_ctx *sctx)return ;ASSERT (test_bit (SCRUB_STRIPE_FLAG_INITIALIZED , &sctx->stripes[0 ].state)); + +scrub_throttle_dev_io (sctx, sctx->stripes[0 ].dev, + nr_stripes <<BTRFS_STRIPE_LEN_SHIFT );for (int i =0 ; i < nr_stripes; i++) { stripe = &sctx->stripes[i];scrub_submit_initial_read (sctx, stripe);
@@ -4572,10 +4193,10 @@ static void flush_scrub_stripes(struct scrub_ctx *sctx) sctx->cur_stripe =0 ; } -int queue_scrub_stripe (struct scrub_ctx *sctx, -struct btrfs_block_group *bg, -struct btrfs_device *dev,int mirror_num, -u64 logical,u32 length,u64 physical) +static int queue_scrub_stripe (struct scrub_ctx *sctx, +struct btrfs_block_group *bg, +struct btrfs_device *dev,int mirror_num, +u64 logical,u32 length,u64 physical) {struct scrub_stripe *stripe;int ret;
@@ -4613,11 +4234,8 @@ static int scrub_simple_mirror(struct scrub_ctx *sctx, u64 physical, int mirror_num) {struct btrfs_fs_info *fs_info = sctx->fs_info; -struct btrfs_root *csum_root =btrfs_csum_root (fs_info, bg->start); -struct btrfs_root *extent_root =btrfs_extent_root (fs_info, bg->start);const u64 logical_end = logical_start + logical_length;/* An artificial limit, inherit from old scrub behavior */ -const u32 max_length =SZ_64K ;struct btrfs_path path = {0 };u64 cur_logical = logical_start;int ret;
@@ -4629,11 +4247,7 @@ static int scrub_simple_mirror(struct scrub_ctx *sctx, path.skip_locking =1 ;/* Go through each extent items inside the logical range */ while (cur_logical < logical_end) { -u64 extent_start; -u64 extent_len; -u64 extent_flags; -u64 extent_gen; -u64 scrub_len; +u64 cur_physical = physical + cur_logical - logical_start;/* Canceled? */ if (atomic_read(&fs_info->scrub_cancel_req) ||
@@ -4663,8 +4277,9 @@ static int scrub_simple_mirror(struct scrub_ctx *sctx, }spin_unlock (&bg->lock); - ret =find_first_extent_item (extent_root, &path, cur_logical, - logical_end - cur_logical); + ret =queue_scrub_stripe (sctx, bg, device, mirror_num, + cur_logical, logical_end - cur_logical, + cur_physical);if (ret >0 ) {/* No more extent, just update the accounting */ sctx->stat.last_physical = physical + logical_length;
@@ -4673,52 +4288,11 @@ static int scrub_simple_mirror(struct scrub_ctx *sctx, }if (ret <0 )break ; -get_extent_info (&path, &extent_start, &extent_len, - &extent_flags, &extent_gen); -/* Skip hole range which doesn't have any extent */ - cur_logical =max (extent_start, cur_logical); -/* -* Scrub len has three limits: -* - Extent size limit -* - Scrub range limit -* This is especially imporatant for RAID0/RAID10 to reuse -* this function -* - Max scrub size limit -*/ - scrub_len =min (min (extent_start + extent_len, - logical_end), cur_logical + max_length) - - cur_logical; +ASSERT (sctx->cur_stripe >0 ); + cur_logical = sctx->stripes[sctx->cur_stripe -1 ].logical + +BTRFS_STRIPE_LEN ; -if (extent_flags &BTRFS_EXTENT_FLAG_DATA ) { - ret =btrfs_lookup_csums_list (csum_root, cur_logical, - cur_logical + scrub_len -1 , - &sctx->csum_list,1 , false); -if (ret) -break ; - } -if ((extent_flags &BTRFS_EXTENT_FLAG_TREE_BLOCK ) && -does_range_cross_boundary (extent_start, extent_len, - logical_start, logical_length)) { -btrfs_err (fs_info, -"scrub: tree block %llu spanning boundaries, ignored. boundary=[%llu, %llu)" , - extent_start, logical_start, logical_end); -spin_lock (&sctx->stat_lock); - sctx->stat.uncorrectable_errors++; -spin_unlock (&sctx->stat_lock); - cur_logical += scrub_len; -continue ; - } - ret =scrub_extent (sctx, map, cur_logical, scrub_len, - cur_logical - logical_start + physical, - device, extent_flags, extent_gen, - mirror_num); -scrub_free_csums (sctx); -if (ret) -break ; -if (sctx->is_dev_replace) -sync_replace_for_zoned (sctx); - cur_logical += scrub_len;/* Don't hold CPU for too long time */ cond_resched (); }
@@ -4803,7 +4377,6 @@ static noinline_for_stack int scrub_stripe(struct scrub_ctx *sctx, int stripe_index) {struct btrfs_fs_info *fs_info = sctx->fs_info; -struct blk_plug plug;struct map_lookup *map = em->map_lookup;const u64 profile = map->type &BTRFS_BLOCK_GROUP_PROFILE_MASK ;const u64 chunk_logical = bg->start;
@@ -4825,12 +4398,6 @@ static noinline_for_stack int scrub_stripe(struct scrub_ctx *sctx, atomic_read(&sctx->bios_in_flight) == 0);scrub_blocked_if_needed (fs_info); -/* -* collect all data csums for the stripe to avoid seeking during -* the scrub. This might currently (crc32) end up to be about 1MB -*/ -blk_start_plug (&plug); -if (sctx->is_dev_replace &&btrfs_dev_is_sequential (sctx->wr_tgtdev, physical)) {mutex_lock (&sctx->wr_lock);
@@ -4932,8 +4499,7 @@ static noinline_for_stack int scrub_stripe(struct scrub_ctx *sctx,mutex_lock (&sctx->wr_lock);scrub_wr_submit (sctx);mutex_unlock (&sctx->wr_lock); - -blk_finish_plug (&plug); +flush_scrub_stripes (sctx);if (sctx->is_dev_replace && ret >=0 ) {int ret2;
fs/btrfs/scrub.h +0 -10
@@ -13,14 +13,4 @@ int btrfs_scrub_cancel_dev(struct btrfs_device *dev);int btrfs_scrub_progress (struct btrfs_fs_info *fs_info,u64 devid,struct btrfs_scrub_progress *progress); -/* -* The following functions are temporary exports to avoid warning on unused -* static functions. -*/ -struct scrub_stripe ; -int queue_scrub_stripe (struct scrub_ctx *sctx, -struct btrfs_block_group *bg, -struct btrfs_device *dev,int mirror_num, -u64 logical,u32 length,u64 physical); -#endif
Signature · 1 line
2.39.2