Support Honeywell mpr pressure sensor

Support Honeywell mpr pressure sensor.

This patch series adds support for Honeywell mpr pressure sensors. There are a variety of sensors with different pressure range supported. The pressure range needs to be set up in the device tree as minimum and maximum pressure in Pascal.

Andreas Klinger (3):
dt-bindings: iio: pressure: Support Honeywell mpr sensors
iio: pressure: Honeywell mpr pressure sensor
MAINTAINERS: Add Honeywell mpr sensor

 .../bindings/iio/pressure/honeywell,mpr.yaml  |  74 +++++
 MAINTAINERS                                   |   7 +
 drivers/iio/pressure/Kconfig                  |  12 +
 drivers/iio/pressure/Makefile                 |   1 +
 drivers/iio/pressure/mpr.c                    | 307 ++++++++++++++++++
 5 files changed, 401 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/honeywell,mpr.yaml
 create mode 100644 drivers/iio/pressure/mpr.c

2.30.2

Your threading is missing thus patches are scattered all over the inbox.

Best regards,
Krzysztof