drm/i915/dsi: Always use unconditional msleep() for the panel_on_delay
Subsystems (3)
PATCH 1/1 drm/i915/dsi: Always use unconditional msleep() for the panel_on_delay
The intel_dsi_msleep() helper skips sleeping if the MIPI-sequences have a version of 3 or newer and the panel is in vid-mode.
This is based on the big comment around line 730 which starts with "Panel enable/disable sequences from the VBT spec.", where the "v3 video mode seq" column does not have any wait t# entries.
Commit 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence") switched to a direct msleep() instead of intel_dsi_msleep() when there is no MIPI_SEQ_DEASSERT_RESET sequence, to fix the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.
This was done under the assumption that when there is a v3 MIPI_SEQ_DEASSERT_RESET sequence it will take care of any necessary delays.
On the Nextbook Ares 8A (a Cherry Trail device like the Acer SW3-016) there is a MIPI_SEQ_DEASSERT_RESET sequence, yet panel_on_delay must still be honored otherwise the panel will not turn on.
Switch to always using an unconditional msleep() for the panel_on_delay instead of making this depend on the presence of a MIPI_SEQ_DEASSERT_RESET sequence.
--- drivers/gpu/drm/i915/display/vlv_dsi.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/display/vlv_dsi.c +3 -15
@@ -788,7 +788,6 @@ static void intel_dsi_pre_enable(struct intel_atomic_state *state, {struct intel_dsi *intel_dsi =enc_to_intel_dsi (encoder);struct intel_crtc *crtc =to_intel_crtc (pipe_config->uapi.crtc); -struct intel_connector *connector =to_intel_connector (conn_state->connector);struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);enum pipe pipe = crtc->pipe;enum port port;
@@ -836,21 +835,10 @@ static void intel_dsi_pre_enable(struct intel_atomic_state *state,if (!IS_GEMINILAKE (dev_priv))intel_dsi_prepare (encoder, pipe_config); +/* Give the panel time to power-on and then deassert its reset */ intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_POWER_ON ); - -/* -* Give the panel time to power-on and then deassert its reset. -* Depending on the VBT MIPI sequences version the deassert-seq -* may contain the necessary delay, intel_dsi_msleep() will skip -* the delay in that case. If there is no deassert-seq, then an -* unconditional msleep is used to give the panel time to power-on. -*/ -if (connector->panel.vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET ]) { -intel_dsi_msleep (intel_dsi, intel_dsi->panel_on_delay); -intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET ); - }else { -msleep (intel_dsi->panel_on_delay); - } +msleep (intel_dsi->panel_on_delay); +intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET );if (IS_GEMINILAKE (dev_priv)) { glk_cold_boot =glk_dsi_enable_io (encoder);
Signature · 1 line
2.39.2
Patchwork
CI[Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/dsi: Always use unconditional msleep() for the panel_on_delay
== Series Details ==
== Series Details ==
Series: drm/i915/dsi: Always use unconditional msleep() for the panel_on_delay
URL : https://patchwork.freedesktop.org/series/116858/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13043 -> Patchwork_116858v1
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/index.html
Participating hosts (36 -> 36)
------------------------------
Additional (1): bat-mtlp-8
Missing (1): fi-snb-2520m
Known issues
------------
Here are the changes found in Patchwork_116858v1 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_suspend@basic-s3@lmem0:
- bat-dg2-9: [PASS][1] -> [FAIL][2] ([fdo#103375]) +6 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/bat-dg2-9/igt@gem_exec_suspend@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/bat-dg2-9/igt@gem_exec_suspend@[email protected]
* igt@kms_pipe_crc_basic@nonblocking-crc-frame-sequence@pipe-c-dp-1:
- bat-dg2-8: [PASS][3] -> [FAIL][4] ([i915#7932])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/bat-dg2-8/igt@kms_pipe_crc_basic@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/bat-dg2-8/igt@kms_pipe_crc_basic@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc@pipe-c-dp-3:
- bat-dg2-9: [PASS][5] -> [FAIL][6] ([fdo#103375] / [i915#7932])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/bat-dg2-9/igt@kms_pipe_crc_basic@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/bat-dg2-9/igt@kms_pipe_crc_basic@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[i915#3595]: https://gitlab.freedesktop.org/drm/intel/issues/3595
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4079]: https://gitlab.freedesktop.org/drm/intel/issues/4079
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4212]: https://gitlab.freedesktop.org/drm/intel/issues/4212
[i915#4213]: https://gitlab.freedesktop.org/drm/intel/issues/4213
[i915#4579]: https://gitlab.freedesktop.org/drm/intel/issues/4579
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#5190]: https://gitlab.freedesktop.org/drm/intel/issues/5190
[i915#5274]: https://gitlab.freedesktop.org/drm/intel/issues/5274
[i915#7456]: https://gitlab.freedesktop.org/drm/intel/issues/7456
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#7932]: https://gitlab.freedesktop.org/drm/intel/issues/7932
[i915#8346]: https://gitlab.freedesktop.org/drm/intel/issues/8346
[i915#8368]: https://gitlab.freedesktop.org/drm/intel/issues/8368
[i915#8369]: https://gitlab.freedesktop.org/drm/intel/issues/8369
[i915#8379]: https://gitlab.freedesktop.org/drm/intel/issues/8379
Build changes
-------------
* Linux: CI_DRM_13043 -> Patchwork_116858v1
CI-20190529: 20190529
CI_DRM_13043: 2fa9c266135355c9993507d7c27cc6722956bfec @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_7264: 2f0a07378e58e5c7d7b589b39ace7e3a2317f6b2 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_116858v1: 2fa9c266135355c9993507d7c27cc6722956bfec @ git://anongit.freedesktop.org/gfx-ci/linux
### Linux commits
085b6c90d21c drm/i915/dsi: Always use unconditional msleep() for the panel_on_delay
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/index.html
Patchwork
CI[Intel-gfx] ✗ Fi.CI.IGT: failure for drm/i915/dsi: Always use unconditional msleep() for the panel_on_delay
In reply to Hans de Goede== Series Details ==
== Series Details ==
Series: drm/i915/dsi: Always use unconditional msleep() for the panel_on_delay
URL : https://patchwork.freedesktop.org/series/116858/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_13043_full -> Patchwork_116858v1_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_116858v1_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_116858v1_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
Participating hosts (7 -> 7)
------------------------------
No changes in participating hosts
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_116858v1_full:
### IGT changes ###
#### Possible regressions ####
* igt@gem_ppgtt@blt-vs-render-ctx0:
- shard-snb: [PASS][1] -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-snb6/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-snb1/igt@[email protected]
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* igt@gem_mmap_offset@clear@smem0:
- {shard-dg1}: [PASS][3] -> [INCOMPLETE][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-dg1-14/igt@gem_mmap_offset@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-dg1-14/igt@gem_mmap_offset@[email protected]
Known issues
------------
Here are the changes found in Patchwork_116858v1_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_barrier_race@remote-request@rcs0:
- shard-glk: [PASS][5] -> [ABORT][6] ([i915#8211])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-glk5/igt@gem_barrier_race@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-glk9/igt@gem_barrier_race@[email protected]
* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-glk: NOTRUN -> [FAIL][7] ([i915#2842])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-glk7/igt@gem_exec_fair@[email protected]
* igt@gem_lmem_swapping@parallel-random-verify-ccs:
- shard-glk: NOTRUN -> [SKIP][8] ([fdo#109271] / [i915#4613]) +1 similar issue
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-glk7/igt@[email protected]
* igt@gen9_exec_parse@allowed-single:
- shard-apl: [PASS][9] -> [ABORT][10] ([i915#5566])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-apl1/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-apl2/igt@[email protected]
* igt@kms_ccs@pipe-a-random-ccs-data-y_tiled_gen12_mc_ccs:
- shard-glk: NOTRUN -> [SKIP][11] ([fdo#109271] / [i915#3886]) +1 similar issue
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-glk7/igt@kms_ccs@pipe-a-random-ccs-data-y_tiled_gen12_mc_ccs.html
* igt@kms_frontbuffer_tracking@psr-1p-offscren-pri-shrfb-draw-render:
- shard-apl: NOTRUN -> [SKIP][12] ([fdo#109271]) +3 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-apl1/igt@kms_frontbuffer_tracking@psr-1p-offscren-pri-shrfb-draw-render.html
* igt@kms_frontbuffer_tracking@psr-rgb101010-draw-blt:
- shard-glk: NOTRUN -> [SKIP][13] ([fdo#109271]) +42 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-glk7/igt@[email protected]
* igt@kms_plane_scaling@planes-upscale-factor-0-25-downscale-factor-0-25@pipe-a-vga-1:
- shard-snb: NOTRUN -> [SKIP][14] ([fdo#109271]) +21 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-snb4/igt@kms_plane_scaling@planes-upscale-factor-0-25-downscale-factor-0-25@pipe-a-vga-1.html
* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area:
- shard-glk: NOTRUN -> [SKIP][15] ([fdo#109271] / [i915#658])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-glk7/igt@[email protected]
* igt@perf@stress-open-close@0-rcs0:
- shard-apl: [PASS][16] -> [ABORT][17] ([i915#5213])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-apl3/igt@perf@[email protected]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-apl3/igt@perf@[email protected]
#### Possible fixes ####
* igt@drm_fdinfo@most-busy-check-all@rcs0:
- {shard-rkl}: [FAIL][18] ([i915#7742]) -> [PASS][19]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-rkl-4/igt@drm_fdinfo@[email protected]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-rkl-4/igt@drm_fdinfo@[email protected]
* igt@gem_exec_endless@dispatch@vecs0:
- {shard-tglu}: [TIMEOUT][20] ([i915#3778]) -> [PASS][21]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-tglu-10/igt@gem_exec_endless@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-tglu-5/igt@gem_exec_endless@[email protected]
* igt@gem_exec_fair@basic-pace-share@rcs0:
- {shard-tglu}: [FAIL][22] ([i915#2842]) -> [PASS][23]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-tglu-4/igt@gem_exec_fair@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-tglu-10/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-pace-solo@rcs0:
- {shard-rkl}: [FAIL][24] ([i915#2842]) -> [PASS][25]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-rkl-4/igt@gem_exec_fair@[email protected]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-rkl-1/igt@gem_exec_fair@[email protected]
* igt@gem_exec_schedule@smoketest@rcs0:
- shard-glk: [DMESG-WARN][26] ([i915#118]) -> [PASS][27]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-glk4/igt@gem_exec_schedule@[email protected]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-glk4/igt@gem_exec_schedule@[email protected]
* igt@gem_lmem_swapping@smem-oom@lmem0:
- {shard-dg1}: [DMESG-WARN][28] ([i915#4936] / [i915#5493]) -> [PASS][29]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-dg1-15/igt@gem_lmem_swapping@[email protected]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-dg1-16/igt@gem_lmem_swapping@[email protected]
* igt@gen9_exec_parse@allowed-all:
- shard-apl: [ABORT][30] ([i915#5566]) -> [PASS][31]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-apl7/igt@[email protected]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-apl1/igt@[email protected]
* igt@i915_pm_dc@dc6-dpms:
- {shard-tglu}: [FAIL][32] ([i915#3989] / [i915#454]) -> [PASS][33]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-tglu-5/igt@[email protected]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-tglu-4/igt@[email protected]
* igt@i915_pm_rc6_residency@rc6-idle@vcs0:
- {shard-dg1}: [FAIL][34] ([i915#3591]) -> [PASS][35]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-dg1-18/igt@i915_pm_rc6_residency@[email protected]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-dg1-15/igt@i915_pm_rc6_residency@[email protected]
* igt@i915_pm_rpm@modeset-non-lpsp-stress-no-wait:
- {shard-rkl}: [SKIP][36] ([i915#1397]) -> [PASS][37]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-rkl-7/igt@[email protected]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-rkl-3/igt@[email protected]
* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-atomic:
- shard-glk: [FAIL][38] ([i915#72]) -> [PASS][39]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-glk4/igt@[email protected]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-glk4/igt@[email protected]
* igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions:
- shard-glk: [FAIL][40] ([i915#2346]) -> [PASS][41]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-glk9/igt@[email protected]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-glk6/igt@[email protected]
* igt@kms_cursor_legacy@single-bo@pipe-b:
- {shard-rkl}: [INCOMPLETE][42] ([i915#8011]) -> [PASS][43]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-rkl-7/igt@kms_cursor_legacy@[email protected]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-rkl-3/igt@kms_cursor_legacy@[email protected]
* igt@perf@stress-open-close@0-rcs0:
- shard-glk: [ABORT][44] ([i915#5213]) -> [PASS][45]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-glk1/igt@perf@[email protected]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-glk7/igt@perf@[email protected]
* igt@perf_pmu@idle@rcs0:
- {shard-dg1}: [FAIL][46] ([i915#4349]) -> [PASS][47]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-dg1-14/igt@perf_pmu@[email protected]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-dg1-18/igt@perf_pmu@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109283]: https://bugs.freedesktop.org/show_bug.cgi?id=109283
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109506]: https://bugs.freedesktop.org/show_bug.cgi?id=109506
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111614]: https://bugs.freedesktop.org/show_bug.cgi?id=111614
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[fdo#112283]: https://bugs.freedesktop.org/show_bug.cgi?id=112283
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#118]: https://gitlab.freedesktop.org/drm/intel/issues/118
[i915#1397]: https://gitlab.freedesktop.org/drm/intel/issues/1397
[i915#1839]: https://gitlab.freedesktop.org/drm/intel/issues/1839
[i915#2346]: https://gitlab.freedesktop.org/drm/intel/issues/2346
[i915#2527]: https://gitlab.freedesktop.org/drm/intel/issues/2527
[i915#2575]: https://gitlab.freedesktop.org/drm/intel/issues/2575
[i915#2587]: https://gitlab.freedesktop.org/drm/intel/issues/2587
[i915#2658]: https://gitlab.freedesktop.org/drm/intel/issues/2658
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#280]: https://gitlab.freedesktop.org/drm/intel/issues/280
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#3281]: https://gitlab.freedesktop.org/drm/intel/issues/3281
[i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
[i915#3297]: https://gitlab.freedesktop.org/drm/intel/issues/3297
[i915#3301]: https://gitlab.freedesktop.org/drm/intel/issues/3301
[i915#3359]: https://gitlab.freedesktop.org/drm/intel/issues/3359
[i915#3458]: https://gitlab.freedesktop.org/drm/intel/issues/3458
[i915#3469]: https://gitlab.freedesktop.org/drm/intel/issues/3469
[i915#3539]: https://gitlab.freedesktop.org/drm/intel/issues/3539
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3591]: https://gitlab.freedesktop.org/drm/intel/issues/3591
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#3638]: https://gitlab.freedesktop.org/drm/intel/issues/3638
[i915#3689]: https://gitlab.freedesktop.org/drm/intel/issues/3689
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#3742]: https://gitlab.freedesktop.org/drm/intel/issues/3742
[i915#3778]: https://gitlab.freedesktop.org/drm/intel/issues/3778
[i915#3840]: https://gitlab.freedesktop.org/drm/intel/issues/3840
[i915#3886]: https://gitlab.freedesktop.org/drm/intel/issues/3886
[i915#3989]: https://gitlab.freedesktop.org/drm/intel/issues/3989
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4079]: https://gitlab.freedesktop.org/drm/intel/issues/4079
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4212]: https://gitlab.freedesktop.org/drm/intel/issues/4212
[i915#4213]: https://gitlab.freedesktop.org/drm/intel/issues/4213
[i915#4270]: https://gitlab.freedesktop.org/drm/intel/issues/4270
[i915#4349]: https://gitlab.freedesktop.org/drm/intel/issues/4349
[i915#4538]: https://gitlab.freedesktop.org/drm/intel/issues/4538
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#4565]: https://gitlab.freedesktop.org/drm/intel/issues/4565
[i915#4579]: https://gitlab.freedesktop.org/drm/intel/issues/4579
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4767]: https://gitlab.freedesktop.org/drm/intel/issues/4767
[i915#4812]: https://gitlab.freedesktop.org/drm/intel/issues/4812
[i915#4833]: https://gitlab.freedesktop.org/drm/intel/issues/4833
[i915#4852]: https://gitlab.freedesktop.org/drm/intel/issues/4852
[i915#4860]: https://gitlab.freedesktop.org/drm/intel/issues/4860
[i915#4880]: https://gitlab.freedesktop.org/drm/intel/issues/4880
[i915#4936]: https://gitlab.freedesktop.org/drm/intel/issues/4936
[i915#4958]: https://gitlab.freedesktop.org/drm/intel/issues/4958
[i915#5176]: https://gitlab.freedesktop.org/drm/intel/issues/5176
[i915#5213]: https://gitlab.freedesktop.org/drm/intel/issues/5213
[i915#5235]: https://gitlab.freedesktop.org/drm/intel/issues/5235
[i915#5286]: https://gitlab.freedesktop.org/drm/intel/issues/5286
[i915#5325]: https://gitlab.freedesktop.org/drm/intel/issues/5325
[i915#5354]: https://gitlab.freedesktop.org/drm/intel/issues/5354
[i915#5493]: https://gitlab.freedesktop.org/drm/intel/issues/5493
[i915#5563]: https://gitlab.freedesktop.org/drm/intel/issues/5563
[i915#5566]: https://gitlab.freedesktop.org/drm/intel/issues/5566
[i915#6095]: https://gitlab.freedesktop.org/drm/intel/issues/6095
[i915#6268]: https://gitlab.freedesktop.org/drm/intel/issues/6268
[i915#6524]: https://gitlab.freedesktop.org/drm/intel/issues/6524
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#6590]: https://gitlab.freedesktop.org/drm/intel/issues/6590
[i915#6946]: https://gitlab.freedesktop.org/drm/intel/issues/6946
[i915#7116]: https://gitlab.freedesktop.org/drm/intel/issues/7116
[i915#72]: https://gitlab.freedesktop.org/drm/intel/issues/72
[i915#7561]: https://gitlab.freedesktop.org/drm/intel/issues/7561
[i915#7697]: https://gitlab.freedesktop.org/drm/intel/issues/7697
[i915#7707]: https://gitlab.freedesktop.org/drm/intel/issues/7707
[i915#7711]: https://gitlab.freedesktop.org/drm/intel/issues/7711
[i915#7742]: https://gitlab.freedesktop.org/drm/intel/issues/7742
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#8011]: https://gitlab.freedesktop.org/drm/intel/issues/8011
[i915#8211]: https://gitlab.freedesktop.org/drm/intel/issues/8211
[i915#8381]: https://gitlab.freedesktop.org/drm/intel/issues/8381
Build changes
-------------
* Linux: CI_DRM_13043 -> Patchwork_116858v1
CI-20190529: 20190529
CI_DRM_13043: 2fa9c266135355c9993507d7c27cc6722956bfec @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_7264: 2f0a07378e58e5c7d7b589b39ace7e3a2317f6b2 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_116858v1: 2fa9c266135355c9993507d7c27cc6722956bfec @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/index.html
Re: [Intel-gfx] ✗ Fi.CI.IGT: failure for drm/i915/dsi: Always use unconditional msleep() for the panel_on_delay
Hi,
Quoted 32 lines · Patchwork
*Patch Details*
*Series:* drm/i915/dsi: Always use unconditionalmsleep()for thepanel_on_delay
*URL:* https://patchwork.freedesktop.org/series/116858/ <https://patchwork.freedesktop.org/series/116858/>
*State:* failure
*Details:* https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/index.html <https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/index.html>CI Bug Log - changes from
CI_DRM_13043_full->Patchwork_116858v1_fullSummary
*FAILURE*
Serious unknown changes coming with
Patchwork_116858v1_fullabsolutely need to be verified manually.If you think the reported changes have nothing to do with the changes introduced in
Patchwork_116858v1_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.Participating hosts (7 -> 7)No changes in participating hosts
Possible new issues
Here are the unknown changes that may have been introduced in
Patchwork_116858v1_full:
Quoted 7 lines
IGT changes
Possible regressions
* igt@gem_ppgtt@blt-vs-render-ctx0:
o shard-snb: PASS <https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13043/shard-snb6/igt@[email protected]> -> FAIL <https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_116858v1/shard-snb1/igt@[email protected]>
The only touched file is not used on snb, so this is a false positive.
Regards,
Hans
Quoted 17 lines · Hans de Goede
The
intel_dsi_msleep()helper skips sleeping if the MIPI-sequences have a version of 3 or newer and the panel is in vid-mode.This is based on the big comment around line 730 which starts with "Panel enable/disable sequences from the VBT spec.", where the "v3 video mode seq" column does not have any wait t# entries.
Commit
6fdb335f1c9c("drm/i915/dsi: Use unconditional msleep for thepanel_on_delaywhen there is no reset-deassert MIPI-sequence") switched to a directmsleep()instead ofintel_dsi_msleep()when there is noMIPI_SEQ_DEASSERT_RESETsequence, to fix the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.This was done under the assumption that when there is a v3
MIPI_SEQ_DEASSERT_RESETsequence it will take care of any necessary delays.
Quoted 7 lines
On the Nextbook Ares 8A (a Cherry Trail device like the Acer SW3-016) there is a
MIPI_SEQ_DEASSERT_RESETsequence, yetpanel_on_delaymust still be honored otherwise the panel will not turn on.Switch to always using an unconditional
msleep()for thepanel_on_delayinstead of making this depend on the presence of aMIPI_SEQ_DEASSERT_RESETsequence.
I just checked what Windows does, and at least for icl+ it always waits for the panel power delays regardless of what the VBT MIPI sequences are doing.
So I suspect we should just get rid of intel_dsi_msleep() entirely and do what the power sequencing delays tell us. Anything else is untested territory. If the VBT actually wanted us to skip the delays then it should really be setting them to zero.
Quoted 46 lines
Fixes 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence")Signed-off-by Hans de Goede <[email protected]>--- drivers/gpu/drm/i915/display/vlv_dsi.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-)drivers/gpu/drm/i915/display/vlv_dsi.c +3
-15@@ -788,7 +788,6 @@ static void intel_dsi_pre_enable(struct intel_atomic_state *state, {struct intel_dsi *intel_dsi =enc_to_intel_dsi (encoder);struct intel_crtc *crtc =to_intel_crtc (pipe_config->uapi.crtc); -struct intel_connector *connector =to_intel_connector (conn_state->connector);struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);enum pipe pipe = crtc->pipe;enum port port;@@ -836,21 +835,10 @@ static void intel_dsi_pre_enable(struct intel_atomic_state *state,if (!IS_GEMINILAKE (dev_priv))intel_dsi_prepare (encoder, pipe_config); +/* Give the panel time to power-on and then deassert its reset */ intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_POWER_ON ); - -/* -* Give the panel time to power-on and then deassert its reset. -* Depending on the VBT MIPI sequences version the deassert-seq -* may contain the necessary delay, intel_dsi_msleep() will skip -* the delay in that case. If there is no deassert-seq, then an -* unconditional msleep is used to give the panel time to power-on. -*/ -if (connector->panel.vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET ]) { -intel_dsi_msleep (intel_dsi, intel_dsi->panel_on_delay); -intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET ); - }else { -msleep (intel_dsi->panel_on_delay); - } +msleep (intel_dsi->panel_on_delay); +intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET );if (IS_GEMINILAKE (dev_priv)) { glk_cold_boot =glk_dsi_enable_io (encoder);Signature · 1 line
2.39.2
Signature · 2 lines
Ville Syrjälä Intel
Hi Ville,
Quoted 30 lines · Ville Syrjälä
Quoted 17 lines · Hans de Goede
The
intel_dsi_msleep()helper skips sleeping if the MIPI-sequences have a version of 3 or newer and the panel is in vid-mode.This is based on the big comment around line 730 which starts with "Panel enable/disable sequences from the VBT spec.", where the "v3 video mode seq" column does not have any wait t# entries.
Commit
6fdb335f1c9c("drm/i915/dsi: Use unconditional msleep for thepanel_on_delaywhen there is no reset-deassert MIPI-sequence") switched to a directmsleep()instead ofintel_dsi_msleep()when there is noMIPI_SEQ_DEASSERT_RESETsequence, to fix the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.This was done under the assumption that when there is a v3
MIPI_SEQ_DEASSERT_RESETsequence it will take care of any necessary delays.Quoted 7 lines
On the Nextbook Ares 8A (a Cherry Trail device like the Acer SW3-016) there is a
MIPI_SEQ_DEASSERT_RESETsequence, yetpanel_on_delaymust still be honored otherwise the panel will not turn on.Switch to always using an unconditional
msleep()for thepanel_on_delayinstead of making this depend on the presence of aMIPI_SEQ_DEASSERT_RESETsequence.I just checked what Windows does, and at least for icl+ it always waits for the panel power delays regardless of what the VBT MIPI sequences are doing.
Quoted 5 lines
So I suspect we should just get rid of
intel_dsi_msleep()entirely and do what the power sequencing delays tell us. Anything else is untested territory. If the VBT actually wanted us to skip the delays then it should really be setting them to zero.
So I checked and there are only 4 (before this patch) / 3 (after this patch) callers of intel_dsi_msleep().
So just getting rid of it entirely sounds good to me.
Shall I prepare a v2 patch which does this ?
Regards,
Hans
Quoted 46 lines
Quoted 45 lines
Fixes 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence")Signed-off-by Hans de Goede <[email protected]>--- drivers/gpu/drm/i915/display/vlv_dsi.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-)drivers/gpu/drm/i915/display/vlv_dsi.c +3
-15@@ -788,7 +788,6 @@ static void intel_dsi_pre_enable(struct intel_atomic_state *state, {struct intel_dsi *intel_dsi =enc_to_intel_dsi (encoder);struct intel_crtc *crtc =to_intel_crtc (pipe_config->uapi.crtc); -struct intel_connector *connector =to_intel_connector (conn_state->connector);struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);enum pipe pipe = crtc->pipe;enum port port;@@ -836,21 +835,10 @@ static void intel_dsi_pre_enable(struct intel_atomic_state *state,if (!IS_GEMINILAKE (dev_priv))intel_dsi_prepare (encoder, pipe_config); +/* Give the panel time to power-on and then deassert its reset */ intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_POWER_ON ); - -/* -* Give the panel time to power-on and then deassert its reset. -* Depending on the VBT MIPI sequences version the deassert-seq -* may contain the necessary delay, intel_dsi_msleep() will skip -* the delay in that case. If there is no deassert-seq, then an -* unconditional msleep is used to give the panel time to power-on. -*/ -if (connector->panel.vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET ]) { -intel_dsi_msleep (intel_dsi, intel_dsi->panel_on_delay); -intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET ); - }else { -msleep (intel_dsi->panel_on_delay); - } +msleep (intel_dsi->panel_on_delay); +intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET );if (IS_GEMINILAKE (dev_priv)) { glk_cold_boot =glk_dsi_enable_io (encoder);Signature · 1 line
2.39.2
Quoted 39 lines · Hans de Goede
Hi Ville,
Quoted 30 lines · Ville Syrjälä
Quoted 17 lines · Hans de Goede
The
intel_dsi_msleep()helper skips sleeping if the MIPI-sequences have a version of 3 or newer and the panel is in vid-mode.This is based on the big comment around line 730 which starts with "Panel enable/disable sequences from the VBT spec.", where the "v3 video mode seq" column does not have any wait t# entries.
Commit
6fdb335f1c9c("drm/i915/dsi: Use unconditional msleep for thepanel_on_delaywhen there is no reset-deassert MIPI-sequence") switched to a directmsleep()instead ofintel_dsi_msleep()when there is noMIPI_SEQ_DEASSERT_RESETsequence, to fix the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.This was done under the assumption that when there is a v3
MIPI_SEQ_DEASSERT_RESETsequence it will take care of any necessary delays.Quoted 7 lines
On the Nextbook Ares 8A (a Cherry Trail device like the Acer SW3-016) there is a
MIPI_SEQ_DEASSERT_RESETsequence, yetpanel_on_delaymust still be honored otherwise the panel will not turn on.Switch to always using an unconditional
msleep()for thepanel_on_delayinstead of making this depend on the presence of aMIPI_SEQ_DEASSERT_RESETsequence.I just checked what Windows does, and at least for icl+ it always waits for the panel power delays regardless of what the VBT MIPI sequences are doing.
Quoted 5 lines
So I suspect we should just get rid of
intel_dsi_msleep()entirely and do what the power sequencing delays tell us. Anything else is untested territory. If the VBT actually wanted us to skip the delays then it should really be setting them to zero.
Quoted 6 lines
So I checked and there are only 4 (before this patch) / 3 (after this patch) callers of
intel_dsi_msleep().So just getting rid of it entirely sounds good to me.
Shall I prepare a v2 patch which does this ?
Please do.
Quoted 55 lines
Regards,
Hans
Quoted 46 lines
Quoted 45 lines
Fixes 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence")Signed-off-by Hans de Goede <[email protected]>--- drivers/gpu/drm/i915/display/vlv_dsi.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-)drivers/gpu/drm/i915/display/vlv_dsi.c +3
-15@@ -788,7 +788,6 @@ static void intel_dsi_pre_enable(struct intel_atomic_state *state, {struct intel_dsi *intel_dsi =enc_to_intel_dsi (encoder);struct intel_crtc *crtc =to_intel_crtc (pipe_config->uapi.crtc); -struct intel_connector *connector =to_intel_connector (conn_state->connector);struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);enum pipe pipe = crtc->pipe;enum port port;@@ -836,21 +835,10 @@ static void intel_dsi_pre_enable(struct intel_atomic_state *state,if (!IS_GEMINILAKE (dev_priv))intel_dsi_prepare (encoder, pipe_config); +/* Give the panel time to power-on and then deassert its reset */ intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_POWER_ON ); - -/* -* Give the panel time to power-on and then deassert its reset. -* Depending on the VBT MIPI sequences version the deassert-seq -* may contain the necessary delay, intel_dsi_msleep() will skip -* the delay in that case. If there is no deassert-seq, then an -* unconditional msleep is used to give the panel time to power-on. -*/ -if (connector->panel.vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET ]) { -intel_dsi_msleep (intel_dsi, intel_dsi->panel_on_delay); -intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET ); - }else { -msleep (intel_dsi->panel_on_delay); - } +msleep (intel_dsi->panel_on_delay); +intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET );if (IS_GEMINILAKE (dev_priv)) { glk_cold_boot =glk_dsi_enable_io (encoder);Signature · 1 line
2.39.2
Signature · 2 lines
Ville Syrjälä Intel