TTY/Serial driver changes for 6.4-rc1
Greg KH
maintainerThe following changes since commit 09a9639e56c01c7a00d6c0ca63f4c7c41abe075d:
Linux 6.3-rc6 (2023-04-09 11:15:57 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-6.4-rc1
for you to fetch changes up to 2b3174c96696cde676393474f0e01d0d108462f5:
n_gsm: Use array_index_nospec() with index that comes from userspace (2023-04-20 14:11:33 +0200)
----------------------------------------------------------------
TTY/Serial changes for 6.4-rc1
Here is the big set of tty/serial driver updates for 6.4-rc1.
Nothing major, just lots of tiny, constant, forward development. This includes:
- obligatory n_gsm updates and feature additions
- 8250_em driver updates
- sh-sci driver updates
- dts cleanups and updates
- general cleanups and improvements by Ilpo and Jiri
- other small serial driver core fixes and driver updates
All of these have been in linux-next for a while with no reported problems.
----------------------------------------------------------------
Arend van Spriel (1):
serial: bcm63xx-uart: add polling support
Bernhard Rosenkränzer (1):
dt-bindings: serial: mediatek,uart: add MT8365
Biju Das (13):
serial: 8250_em: Fix UART port type
serial: 8250_em: Simplify probe()
serial: 8250_em: Drop unused header file
serial: 8250_em: Add missing break statement
serial: 8250_em: Use devm_clk_get_enabled()
serial: 8250_em: Use pseudo offset for UART_FCR
serial: 8250_em: Add serial8250_em_{reg_update(),out_helper()}
tty: serial: sh-sci: Remove setting {src,dst}_{addr,addr_width} based on DMA direction
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support
tty: serial: sh-sci: Fix TE setting on SCI IP
tty: serial: sh-sci: Add support for tx end interrupt handling
tty: serial: sh-sci: Fix end of transmission on SCI
Christophe JAILLET (1):
serial: 8250: Reorder fields in 'struct plat_serial8250_port'
Conor Dooley (1):
serial: make SiFive serial drivers depend on ARCH_ symbols
Cristian Ciocaltea (6):
dt-bindings: serial: snps-dw-apb-uart: Switch dma-names order
ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes
riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes
Daniel Starke (4):
tty: n_gsm: add ioctl for DLC specific parameter configuration
tty: n_gsm: allow window size configuration
tty: n_gsm: add ioctl for DLC config via ldisc handle
tty: n_gsm: fix redundant assignment of gsm->encoding
Doug Berger (1):
serial: 8250_bcm7271: Fix arbitration handling
Douglas Anderson (2):
serial: uart_poll_init() should power on the UART
tty: serial: qcom-geni-serial: Add a poll_init() function
Florian Fainelli (1):
serial: 8250: Add missing wakeup event reporting
Greg Kroah-Hartman (2):
Merge 6.3-rc3 into tty-next
Merge 6.3-rc6 into tty-next
Hanno Böck (1):
tty: Fix typo in LEGACY_TIOCSTI Kconfig description
Ilpo Järvinen (21):
serial: Use ARRAY_SIZE() with iso7816 reserved array
serial: Use B0 instead of implicit zero assumption
serial: Remove extern from func prototypes in headers
serial: Move uart_change_speed() earlier
serial: Rename uart_change_speed() to uart_change_line_settings()
serial: Make hw_stopped bool
serial: Rename hw_stopped to old_hw_stopped & improve logic
serial: Remove uart_wait_until_sent() forward declaration
n_tty: Convert no_space_left to space_left boolean
tty_ioctl: Use BIT() for internal flags
Bluetooth: hci_ldisc: Fix tty_set_termios() return value assumptions
n_tty: Sort includes alphabetically
n_tty: Use DIV_ROUND_UP() in room calculation
n_tty: Cleanup includes
n_tty: Reindent if condition
tty: Convert hw_stopped in tty_struct to bool
serial: ucc_uart: Use uart_circ_empty()
serial: cpm_uart: Use uart_circ_empty()
tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH
serial: 8250: Fix serial8250_tx_empty() race with DMA Tx
n_gsm: Use array_index_nospec() with index that comes from userspace
Jan Kundrát (1):
serial: max310x: fix IO data corruption in batched operations
Jiri Slaby (SUSE) (6):
tty: serial: simplify qcom_geni_serial_send_chunk_fifo()
tty: synclink_gt: don't allocate and pass dummy flags
tty: vt: reformat tioclinux()
tty: vt: simplify some cases in tioclinux()
tty: vt: distribute EXPORT_SYMBOL()
tty: vt: drop checks for undefined VT_SINGLE_DRIVER
Johan Hovold (1):
serial: fix TIOCSRS485 locking
Krzysztof Kozlowski (3):
serial: sh-sci: mark OF related data as maybe unused
serial: sprd: Drop of_match_ptr for ID table
dt-bindings: serial: snps-dw-apb-uart: correct number of DMAs
Li zeming (1):
tty: tty_ldisc: Remove the ret variable
Luis Chamberlain (1):
tty: simplify sysctl registration
Lukas Bulwahn (2):
tty: serial: remove obsolete config SERIAL_SAMSUNG_UARTS_4
serial: sb1250-duart: clean up after SIBYTE_BCM1x55 removal
Marek Vasut (4):
dt-bindings: serial: imx: Document optional DMA properties
dt-bindings: serial: imx: Document mandatory clock properties
serial: stm32: Remove unused struct stm32_port txdone element
serial: stm32: Re-assert RTS/DE GPIO in RS485 mode only if more data are transmitted
Martin Blumenstingl (3):
dt-bindings: serial: amlogic,meson-uart: Add compatible string for G12A
tty: serial: meson: Add a new compatible string for the G12A SoC
arm64: dts: meson-g12-common: Use the G12A UART compatible string
Peng Fan (1):
dt-bindings: serial: fsl-lpuart: add optional power-domains property
Petr Mladek (1):
Documentation/serial-console: Document the behavior when the last console= parameter is not used
Randy Dunlap (1):
linux/vt_buffer.h: allow either builtin or modular for macros
Rob Herring (3):
serial: Use of_property_present() for testing DT property presence
serial: Use of_property_read_bool() for boolean properties
dt-bindings: serial: Drop unneeded quotes
Shenwei Wang (1):
tty: serial: fsl_lpuart: adjust buffer length to the intended size
Sherry Sun (1):
tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform
Tom Rix (1):
serial: imx: remove unused imx_uart_is_imx* functions
Tony Lindgren (2):
serial: 8250: Reinit port->pm on port specific driver unbind
serial: core: Disable uart_start() on uart_remove_one_port()
Uwe Kleine-König (1):
serial: imx: Drop a few unneeded casts
Documentation/admin-guide/serial-console.rst | 36 +++- .../bindings/serial/amlogic,meson-uart.yaml | 13 +- .../devicetree/bindings/serial/fsl-imx-uart.yaml | 27 +++ .../devicetree/bindings/serial/fsl-lpuart.yaml | 3 + .../devicetree/bindings/serial/mediatek,uart.yaml | 1 + .../bindings/serial/qcom,serial-geni-qcom.yaml | 4 +- .../bindings/serial/renesas,em-uart.yaml | 4 +- .../devicetree/bindings/serial/renesas,hscif.yaml | 4 +- .../devicetree/bindings/serial/renesas,sci.yaml | 4 +- .../devicetree/bindings/serial/renesas,scif.yaml | 4 +- .../devicetree/bindings/serial/renesas,scifa.yaml | 4 +- .../devicetree/bindings/serial/renesas,scifb.yaml | 4 +- .../devicetree/bindings/serial/serial.yaml | 4 +- .../bindings/serial/snps-dw-apb-uart.yaml | 4 +- .../devicetree/bindings/serial/sprd-uart.yaml | 4 +- .../bindings/serial/sunplus,sp7021-uart.yaml | 4 +- Documentation/driver-api/tty/n_gsm.rst | 20 ++ arch/arm/boot/dts/sun6i-a31.dtsi | 12 +- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 10 +- arch/arm/boot/dts/sun8i-v3s.dtsi | 6 +- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 8 +- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 15 +- arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 12 +- drivers/bluetooth/hci_ldisc.c | 8 +- drivers/char/pcmcia/synclink_cs.c | 6 +- drivers/mmc/core/sdio_uart.c | 10 +- drivers/tty/Kconfig | 2 +- drivers/tty/amiserial.c | 6 +- drivers/tty/mxser.c | 6 +- drivers/tty/n_gsm.c | 231 ++++++++++++++++++++- drivers/tty/n_tty.c | 43 ++-- drivers/tty/serial/8250/8250.h | 12 ++ drivers/tty/serial/8250/8250_bcm7271.c | 18 +- drivers/tty/serial/8250/8250_core.c | 1 + drivers/tty/serial/8250/8250_em.c | 113 ++++++++-- drivers/tty/serial/8250/8250_port.c | 11 +- drivers/tty/serial/Kconfig | 11 +- drivers/tty/serial/bcm63xx_uart.c | 38 ++++ drivers/tty/serial/cpm_uart/cpm_uart_core.c | 5 +- drivers/tty/serial/fsl_lpuart.c | 10 +- drivers/tty/serial/imx.c | 48 ++--- drivers/tty/serial/max310x.c | 17 +- drivers/tty/serial/meson_uart.c | 8 +- drivers/tty/serial/mxs-auart.c | 4 +- drivers/tty/serial/qcom_geni_serial.c | 11 +- drivers/tty/serial/sb1250-duart.c | 2 +- drivers/tty/serial/serial_core.c | 125 +++++------ drivers/tty/serial/sh-sci.c | 115 +++++++--- drivers/tty/serial/sh-sci.h | 3 + drivers/tty/serial/sprd_serial.c | 2 +- drivers/tty/serial/stm32-usart.c | 6 +- drivers/tty/serial/stm32-usart.h | 1 - drivers/tty/serial/sunzilog.c | 4 +- drivers/tty/serial/ucc_uart.c | 7 +- drivers/tty/synclink_gt.c | 24 +-- drivers/tty/tty.h | 2 + drivers/tty/tty_io.c | 24 +-- drivers/tty/tty_ioctl.c | 54 +++-- drivers/tty/tty_ldisc.c | 3 +- drivers/tty/vt/vt.c | 205 ++++++++---------- include/linux/serial_8250.h | 45 ++-- include/linux/serial_core.h | 15 +- include/linux/tty.h | 2 +- include/linux/vt_buffer.h | 2 +- include/uapi/linux/gsmmux.h | 17 +- 65 files changed, 979 insertions(+), 505 deletions(-)
The pull request you sent on Thu, 27 Apr 2023 16:20:04 +0200:
The pull request you sent on Thu, 27 Apr 2023 16:20:04 +0200:
Quoted 1 line
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.gittags/tty-6.4-rc1
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/b39667abcdcc754e32a0eb0df9cf49d45333d4ae
Thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/prtracker.html