i2c-hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver.
PATCH 1/1 i2c-hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver.
From: taolan <[email protected]>
For compatibility, some devices need to work with controller between messages using a stop.
Signed-off-by taolan <[email protected]>
--- drivers/i2c/busses/i2c-hix5hd2.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/i2c/busses/i2c-hix5hd2.c +5 -1
@@ -360,7 +360,11 @@ static int hix5hd2_i2c_xfer(struct i2c_adapter *adap,pm_runtime_get_sync (priv->dev);for (i =0 ; i < num; i++, msgs++) { - stop = (i == num -1 ); +if ((i == num -1 ) || (msgs->flags &I2C_M_STOP )) + stop =1 ; +else + stop =0 ; + ret =hix5hd2_i2c_xfer_msg (priv, msgs, stop);if (ret <0 ) goto out;
Signature · 1 line
2.22.0
Hi Taolan,
Quoted 6 lines · Tao Lan
From: taolan <[email protected]>
For compatibility, some devices need to work with controller between messages using a stop.
Signed-off-by taolan <[email protected]>
Acked-by Andi Shyti <[email protected]>
Thanks,
Andi
Wolfram Sang
AppliedQuoted 6 lines · Tao Lan
From: taolan <[email protected]>
For compatibility, some devices need to work with controller between messages using a stop.
Signed-off-by taolan <[email protected]>
Applied to for-next, thanks!