Skip to contentSkip to conversation

ipvs: align inner_mac_header for encapsulation

PATCH In review Terin Stock 3 participants 3 messages Jun 9, 2023 – Jun 15, 2023

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ipvs: align inner_mac_header for encapsulation

When using encapsulation the original packet's headers are copied to the inner headers. This preserves the space for an inner mac header, which is not used by the inner payloads for the encapsulation types supported by IPVS. If a packet is using GUE or GRE encapsulation and needs to be segmented, flow can be passed to __skb_udp_tunnel_segment() which calculates a negative tunnel header length. A negative tunnel header length causes pskb_may_pull() to fail, dropping the packet.

This can be observed by attaching probes to ip_vs_in_hook(), __dev_queue_xmit(), and __skb_udp_tunnel_segment():

    perf probe --add '__dev_queue_xmit skb->inner_mac_header \
    skb->inner_network_header skb->mac_header skb->network_header'
    perf probe --add '__skb_udp_tunnel_segment:7 tnl_hlen'
    perf probe -m ip_vs --add 'ip_vs_in_hook skb->inner_mac_header \
    skb->inner_network_header skb->mac_header skb->network_header'

These probes the headers and tunnel header length for packets which traverse the IPVS encapsulation path. A TCP packet can be forced into the segmentation path by being smaller than a calculated clamped MSS, but larger than the advertised MSS.

    probe:ip_vs_in_hook: inner_mac_header=0x0 inner_network_header=0x0 mac_header=0x44 network_header=0x52
    probe:ip_vs_in_hook: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
    probe:dev_queue_xmit: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
    probe:__skb_udp_tunnel_segment_L7: tnl_hlen=-2

When using veth-based encapsulation, the interfaces are set to be mac-less, which does not preserve space for an inner mac header. This prevents this issue from occurring.

In our real-world testing of sending a 32KB file we observed operation time increasing from ~75ms for veth-based encapsulation to over 1.5s using IPVS encapsulation due to retries from dropped packets.

This changeset modifies the packet on the encapsulation path in ip_vs_tunnel_xmit() and ip_vs_tunnel_xmit_v6() to remove the inner mac header offset. This fixes UDP segmentation for both encapsulation types, and corrects the inner headers for any IPIP flows that may use it.

Fixes 84c0d5e96f3a ("ipvs: allow tunneling with gue encapsulation")
---
 net/netfilter/ipvs/ip_vs_xmit.c | 2 ++
 1 file changed, 2 insertions(+)
net/netfilter/ipvs/ip_vs_xmit.c +2 -0
index c7652da78c88..9193e109e6b3 100644
@@ -1207,6 +1207,7 @@ ip_vs_tunnel_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	skb->transport_header = skb->network_header;
 
 	skb_set_inner_ipproto(skb, next_protocol);
+	skb_set_inner_mac_header(skb, skb_inner_network_offset(skb));
 
 	if (tun_type == IP_VS_CONN_F_TUNNEL_TYPE_GUE) {
 		bool check = false;
@@ -1349,6 +1350,7 @@ ip_vs_tunnel_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	skb->transport_header = skb->network_header;
 
 	skb_set_inner_ipproto(skb, next_protocol);
+	skb_set_inner_mac_header(skb, skb_inner_network_offset(skb));
 
 	if (tun_type == IP_VS_CONN_F_TUNNEL_TYPE_GUE) {
 		bool check = false;
Signature · 1 line
2.40.1
maintainer Acked-by on v2 1/1
#1 lore raw

Hello,

Quoted 35 lines · Terin Stock

When using encapsulation the original packet's headers are copied to the inner headers. This preserves the space for an inner mac header, which is not used by the inner payloads for the encapsulation types supported by IPVS. If a packet is using GUE or GRE encapsulation and needs to be segmented, flow can be passed to __skb_udp_tunnel_segment() which calculates a negative tunnel header length. A negative tunnel header length causes pskb_may_pull() to fail, dropping the packet.

This can be observed by attaching probes to ip_vs_in_hook(), __dev_queue_xmit(), and __skb_udp_tunnel_segment():

    perf probe --add '__dev_queue_xmit skb->inner_mac_header \
    skb->inner_network_header skb->mac_header skb->network_header'
    perf probe --add '__skb_udp_tunnel_segment:7 tnl_hlen'
    perf probe -m ip_vs --add 'ip_vs_in_hook skb->inner_mac_header \
    skb->inner_network_header skb->mac_header skb->network_header'

These probes the headers and tunnel header length for packets which traverse the IPVS encapsulation path. A TCP packet can be forced into the segmentation path by being smaller than a calculated clamped MSS, but larger than the advertised MSS.

    probe:ip_vs_in_hook: inner_mac_header=0x0 inner_network_header=0x0 mac_header=0x44 network_header=0x52
    probe:ip_vs_in_hook: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
    probe:dev_queue_xmit: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
    probe:__skb_udp_tunnel_segment_L7: tnl_hlen=-2

When using veth-based encapsulation, the interfaces are set to be mac-less, which does not preserve space for an inner mac header. This prevents this issue from occurring.

In our real-world testing of sending a 32KB file we observed operation time increasing from ~75ms for veth-based encapsulation to over 1.5s using IPVS encapsulation due to retries from dropped packets.

Quoted 7 lines

This changeset modifies the packet on the encapsulation path in ip_vs_tunnel_xmit() and ip_vs_tunnel_xmit_v6() to remove the inner mac header offset. This fixes UDP segmentation for both encapsulation types, and corrects the inner headers for any IPIP flows that may use it.

Fixes 84c0d5e96f3a ("ipvs: allow tunneling with gue encapsulation")

Looks good to me for nf/net tree, thanks!

Quoted 26 lines
---
 net/netfilter/ipvs/ip_vs_xmit.c | 2 ++
 1 file changed, 2 insertions(+)
net/netfilter/ipvs/ip_vs_xmit.c +2 -0
index c7652da78c88..9193e109e6b3 100644
@@ -1207,6 +1207,7 @@ ip_vs_tunnel_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	skb->transport_header = skb->network_header;
 
 	skb_set_inner_ipproto(skb, next_protocol);
+	skb_set_inner_mac_header(skb, skb_inner_network_offset(skb));
 
 	if (tun_type == IP_VS_CONN_F_TUNNEL_TYPE_GUE) {
 		bool check = false;
@@ -1349,6 +1350,7 @@ ip_vs_tunnel_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	skb->transport_header = skb->network_header;
 
 	skb_set_inner_ipproto(skb, next_protocol);
+	skb_set_inner_mac_header(skb, skb_inner_network_offset(skb));
 
 	if (tun_type == IP_VS_CONN_F_TUNNEL_TYPE_GUE) {
 		bool check = false;
Signature · 1 line
2.40.1

Regards

--
Julian Anastasov <[email protected]>

reviewer Acked-by on v2 1/1
#2 lore raw
In reply to Terin Stock
Quoted 35 lines · Terin Stock

When using encapsulation the original packet's headers are copied to the inner headers. This preserves the space for an inner mac header, which is not used by the inner payloads for the encapsulation types supported by IPVS. If a packet is using GUE or GRE encapsulation and needs to be segmented, flow can be passed to __skb_udp_tunnel_segment() which calculates a negative tunnel header length. A negative tunnel header length causes pskb_may_pull() to fail, dropping the packet.

This can be observed by attaching probes to ip_vs_in_hook(), __dev_queue_xmit(), and __skb_udp_tunnel_segment():

    perf probe --add '__dev_queue_xmit skb->inner_mac_header \
    skb->inner_network_header skb->mac_header skb->network_header'
    perf probe --add '__skb_udp_tunnel_segment:7 tnl_hlen'
    perf probe -m ip_vs --add 'ip_vs_in_hook skb->inner_mac_header \
    skb->inner_network_header skb->mac_header skb->network_header'

These probes the headers and tunnel header length for packets which traverse the IPVS encapsulation path. A TCP packet can be forced into the segmentation path by being smaller than a calculated clamped MSS, but larger than the advertised MSS.

    probe:ip_vs_in_hook: inner_mac_header=0x0 inner_network_header=0x0 mac_header=0x44 network_header=0x52
    probe:ip_vs_in_hook: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
    probe:dev_queue_xmit: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
    probe:__skb_udp_tunnel_segment_L7: tnl_hlen=-2

When using veth-based encapsulation, the interfaces are set to be mac-less, which does not preserve space for an inner mac header. This prevents this issue from occurring.

In our real-world testing of sending a 32KB file we observed operation time increasing from ~75ms for veth-based encapsulation to over 1.5s using IPVS encapsulation due to retries from dropped packets.

Quoted 7 lines

This changeset modifies the packet on the encapsulation path in ip_vs_tunnel_xmit() and ip_vs_tunnel_xmit_v6() to remove the inner mac header offset. This fixes UDP segmentation for both encapsulation types, and corrects the inner headers for any IPIP flows that may use it.

Fixes 84c0d5e96f3a ("ipvs: allow tunneling with gue encapsulation")