Skip to contentSkip to conversation

riscv,mmio: I/O barriers fixes and cleanups

PATCH Superseded Andrea Parri 3 participants 6 messages Jul 11, 2023 – Aug 9, 2023 RISC-V

v1 of 2 Superseded 1 of 2 applied Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover riscv,mmio: I/O barriers fixes and cleanups

Andrea Parri (2):
riscv,mmio: Fix readX()-to-delay() ordering riscv,mmio: Use the generic implementation for the I/O accesses

 arch/riscv/include/asm/mmio.h | 72 ++++-------------------------------
 1 file changed, 8 insertions(+), 64 deletions(-)
Signature · 7 lines
2.34.1


_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#1 lore raw

PATCH 1/2 riscv,mmio: Fix readX()-to-delay() ordering

Section 2.1 of the Platform Specification [1] states:

Unless otherwise specified by a given I/O device, I/O devices are on ordering channel 0 (i.e., they are point-to-point strongly ordered).

which is not sufficient to guarantee that a readX() by a hart completes before a subsequent delay() on the same hart (cf. memory-barriers.txt, "Kernel I/O barrier effects").

Set the I(nput) bit in __io_ar() to restore the ordering, align inline comments.

[1] https://github.com/riscv/riscv-platform-specs

---
 arch/riscv/include/asm/mmio.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
arch/riscv/include/asm/mmio.h +8 -8
index aff6c33ab0c08..4c58ee7f95ecf 100644
@@ -101,9 +101,9 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
  * Relaxed I/O memory access primitives. These follow the Device memory
  * ordering rules but do not guarantee any ordering relative to Normal memory
  * accesses.  These are defined to order the indicated access (either a read or
- * write) with all other I/O memory accesses. Since the platform specification
- * defines that all I/O regions are strongly ordered on channel 2, no explicit
- * fences are required to enforce this ordering.
+ * write) with all other I/O memory accesses to the same peripheral. Since the
+ * platform specification defines that all I/O regions are strongly ordered on
+ * channel 0, no explicit fences are required to enforce this ordering.
  */
 /* FIXME: These are now the same as asm-generic */
 #define __io_rbr()		do {} while (0)
@@ -125,14 +125,14 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
 #endif
 
 /*
- * I/O memory access primitives. Reads are ordered relative to any
- * following Normal memory access. Writes are ordered relative to any prior
- * Normal memory access.  The memory barriers here are necessary as RISC-V
+ * I/O memory access primitives.  Reads are ordered relative to any following
+ * Normal memory read and delay() loop.  Writes are ordered relative to any
+ * prior Normal memory write.  The memory barriers here are necessary as RISC-V
  * doesn't define any ordering between the memory space and the I/O space.
  */
 #define __io_br()	do {} while (0)
-#define __io_ar(v)	__asm__ __volatile__ ("fence i,r" : : : "memory")
-#define __io_bw()	__asm__ __volatile__ ("fence w,o" : : : "memory")
+#define __io_ar(v)	({ __asm__ __volatile__ ("fence i,ir" : : : "memory"); })
+#define __io_bw()	({ __asm__ __volatile__ ("fence w,o" : : : "memory"); })
 #define __io_aw()	mmiowb_set_pending()
 
 #define readb(c)	({ u8  __v; __io_br(); __v = readb_cpu(c); __io_ar(__v); __v; })
Signature · 7 lines
2.34.1


_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#2 lore raw

PATCH 2/2 riscv,mmio: Use the generic implementation for the I/O accesses

In reply to Andrea Parri

The current implementation of readX(), writeX() and their "relaxed" variants, readX_relaxed() and writeX_relaxed(), matches the generic implementation; remove the redundant code.

No functional change intended.

---
 arch/riscv/include/asm/mmio.h | 68 ++++-------------------------------
 1 file changed, 6 insertions(+), 62 deletions(-)
arch/riscv/include/asm/mmio.h +6 -62
index 4c58ee7f95ecf..116b898fe969d 100644
@@ -80,72 +80,16 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
 #endif
 
 /*
- * Unordered I/O memory access primitives.  These are even more relaxed than
- * the relaxed versions, as they don't even order accesses between successive
- * operations to the I/O regions.
- */
-#define readb_cpu(c)		({ u8  __r = __raw_readb(c); __r; })
-#define readw_cpu(c)		({ u16 __r = le16_to_cpu((__force __le16)__raw_readw(c)); __r; })
-#define readl_cpu(c)		({ u32 __r = le32_to_cpu((__force __le32)__raw_readl(c)); __r; })
-
-#define writeb_cpu(v, c)	((void)__raw_writeb((v), (c)))
-#define writew_cpu(v, c)	((void)__raw_writew((__force u16)cpu_to_le16(v), (c)))
-#define writel_cpu(v, c)	((void)__raw_writel((__force u32)cpu_to_le32(v), (c)))
-
-#ifdef CONFIG_64BIT
-#define readq_cpu(c)		({ u64 __r = le64_to_cpu((__force __le64)__raw_readq(c)); __r; })
-#define writeq_cpu(v, c)	((void)__raw_writeq((__force u64)cpu_to_le64(v), (c)))
-#endif
-
-/*
- * Relaxed I/O memory access primitives. These follow the Device memory
- * ordering rules but do not guarantee any ordering relative to Normal memory
- * accesses.  These are defined to order the indicated access (either a read or
- * write) with all other I/O memory accesses to the same peripheral. Since the
- * platform specification defines that all I/O regions are strongly ordered on
- * channel 0, no explicit fences are required to enforce this ordering.
- */
-/* FIXME: These are now the same as asm-generic */
-#define __io_rbr()		do {} while (0)
-#define __io_rar()		do {} while (0)
-#define __io_rbw()		do {} while (0)
-#define __io_raw()		do {} while (0)
-
-#define readb_relaxed(c)	({ u8  __v; __io_rbr(); __v = readb_cpu(c); __io_rar(); __v; })
-#define readw_relaxed(c)	({ u16 __v; __io_rbr(); __v = readw_cpu(c); __io_rar(); __v; })
-#define readl_relaxed(c)	({ u32 __v; __io_rbr(); __v = readl_cpu(c); __io_rar(); __v; })
-
-#define writeb_relaxed(v, c)	({ __io_rbw(); writeb_cpu((v), (c)); __io_raw(); })
-#define writew_relaxed(v, c)	({ __io_rbw(); writew_cpu((v), (c)); __io_raw(); })
-#define writel_relaxed(v, c)	({ __io_rbw(); writel_cpu((v), (c)); __io_raw(); })
-
-#ifdef CONFIG_64BIT
-#define readq_relaxed(c)	({ u64 __v; __io_rbr(); __v = readq_cpu(c); __io_rar(); __v; })
-#define writeq_relaxed(v, c)	({ __io_rbw(); writeq_cpu((v), (c)); __io_raw(); })
-#endif
-
-/*
- * I/O memory access primitives.  Reads are ordered relative to any following
- * Normal memory read and delay() loop.  Writes are ordered relative to any
- * prior Normal memory write.  The memory barriers here are necessary as RISC-V
- * doesn't define any ordering between the memory space and the I/O space.
+ * I/O barriers
+ *
+ * See Documentation/memory-barriers.txt, "Kernel I/O barrier effects".
+ *
+ * Assume that each I/O region is strongly ordered on channel 0, following the
+ * RISC-V Platform Specification, "OS-A Common Requirements".
  */
 #define __io_br()	do {} while (0)
 #define __io_ar(v)	({ __asm__ __volatile__ ("fence i,ir" : : : "memory"); })
 #define __io_bw()	({ __asm__ __volatile__ ("fence w,o" : : : "memory"); })
 #define __io_aw()	mmiowb_set_pending()
 
-#define readb(c)	({ u8  __v; __io_br(); __v = readb_cpu(c); __io_ar(__v); __v; })
-#define readw(c)	({ u16 __v; __io_br(); __v = readw_cpu(c); __io_ar(__v); __v; })
-#define readl(c)	({ u32 __v; __io_br(); __v = readl_cpu(c); __io_ar(__v); __v; })
-
-#define writeb(v, c)	({ __io_bw(); writeb_cpu((v), (c)); __io_aw(); })
-#define writew(v, c)	({ __io_bw(); writew_cpu((v), (c)); __io_aw(); })
-#define writel(v, c)	({ __io_bw(); writel_cpu((v), (c)); __io_aw(); })
-
-#ifdef CONFIG_64BIT
-#define readq(c)	({ u64 __v; __io_br(); __v = readq_cpu(c); __io_ar(__v); __v; })
-#define writeq(v, c)	({ __io_bw(); writeq_cpu((v), (c)); __io_aw(); })
-#endif
-
 #endif /* _ASM_RISCV_MMIO_H */
Signature · 7 lines
2.34.1


_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#3 lore raw

Re: [PATCH 2/2] riscv,mmio: Use the generic implementation for the I/O accesses

Quoted 7 lines · Andrea Parri

The current implementation of readX(), writeX() and their "relaxed" variants, readX_relaxed() and writeX_relaxed(), matches the generic implementation; remove the redundant code.

No functional change intended.

This fails to build for (64-bit, I didn't check 32-bit) nommu:
arch/riscv/include/asm/timex.h:20:16: error: implicit declaration of function 'readq_relaxed' [-Werror=implicit-function-declaration] include/asm-generic/io.h:342:23: error: conflicting types for 'readq_relaxed'; have 'u64(const volatile void *)' {aka 'long long unsigned int(const volatile void *)'}

Cheers,
Conor.

Quoted 90 lines
---
 arch/riscv/include/asm/mmio.h | 68 ++++-------------------------------
 1 file changed, 6 insertions(+), 62 deletions(-)
arch/riscv/include/asm/mmio.h +6 -62
index 4c58ee7f95ecf..116b898fe969d 100644
@@ -80,72 +80,16 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
 #endif
 
 /*
- * Unordered I/O memory access primitives.  These are even more relaxed than
- * the relaxed versions, as they don't even order accesses between successive
- * operations to the I/O regions.
- */
-#define readb_cpu(c)		({ u8  __r = __raw_readb(c); __r; })
-#define readw_cpu(c)		({ u16 __r = le16_to_cpu((__force __le16)__raw_readw(c)); __r; })
-#define readl_cpu(c)		({ u32 __r = le32_to_cpu((__force __le32)__raw_readl(c)); __r; })
-
-#define writeb_cpu(v, c)	((void)__raw_writeb((v), (c)))
-#define writew_cpu(v, c)	((void)__raw_writew((__force u16)cpu_to_le16(v), (c)))
-#define writel_cpu(v, c)	((void)__raw_writel((__force u32)cpu_to_le32(v), (c)))
-
-#ifdef CONFIG_64BIT
-#define readq_cpu(c)		({ u64 __r = le64_to_cpu((__force __le64)__raw_readq(c)); __r; })
-#define writeq_cpu(v, c)	((void)__raw_writeq((__force u64)cpu_to_le64(v), (c)))
-#endif
-
-/*
- * Relaxed I/O memory access primitives. These follow the Device memory
- * ordering rules but do not guarantee any ordering relative to Normal memory
- * accesses.  These are defined to order the indicated access (either a read or
- * write) with all other I/O memory accesses to the same peripheral. Since the
- * platform specification defines that all I/O regions are strongly ordered on
- * channel 0, no explicit fences are required to enforce this ordering.
- */
-/* FIXME: These are now the same as asm-generic */
-#define __io_rbr()		do {} while (0)
-#define __io_rar()		do {} while (0)
-#define __io_rbw()		do {} while (0)
-#define __io_raw()		do {} while (0)
-
-#define readb_relaxed(c)	({ u8  __v; __io_rbr(); __v = readb_cpu(c); __io_rar(); __v; })
-#define readw_relaxed(c)	({ u16 __v; __io_rbr(); __v = readw_cpu(c); __io_rar(); __v; })
-#define readl_relaxed(c)	({ u32 __v; __io_rbr(); __v = readl_cpu(c); __io_rar(); __v; })
-
-#define writeb_relaxed(v, c)	({ __io_rbw(); writeb_cpu((v), (c)); __io_raw(); })
-#define writew_relaxed(v, c)	({ __io_rbw(); writew_cpu((v), (c)); __io_raw(); })
-#define writel_relaxed(v, c)	({ __io_rbw(); writel_cpu((v), (c)); __io_raw(); })
-
-#ifdef CONFIG_64BIT
-#define readq_relaxed(c)	({ u64 __v; __io_rbr(); __v = readq_cpu(c); __io_rar(); __v; })
-#define writeq_relaxed(v, c)	({ __io_rbw(); writeq_cpu((v), (c)); __io_raw(); })
-#endif
-
-/*
- * I/O memory access primitives.  Reads are ordered relative to any following
- * Normal memory read and delay() loop.  Writes are ordered relative to any
- * prior Normal memory write.  The memory barriers here are necessary as RISC-V
- * doesn't define any ordering between the memory space and the I/O space.
+ * I/O barriers
+ *
+ * See Documentation/memory-barriers.txt, "Kernel I/O barrier effects".
+ *
+ * Assume that each I/O region is strongly ordered on channel 0, following the
+ * RISC-V Platform Specification, "OS-A Common Requirements".
  */
 #define __io_br()	do {} while (0)
 #define __io_ar(v)	({ __asm__ __volatile__ ("fence i,ir" : : : "memory"); })
 #define __io_bw()	({ __asm__ __volatile__ ("fence w,o" : : : "memory"); })
 #define __io_aw()	mmiowb_set_pending()
 
-#define readb(c)	({ u8  __v; __io_br(); __v = readb_cpu(c); __io_ar(__v); __v; })
-#define readw(c)	({ u16 __v; __io_br(); __v = readw_cpu(c); __io_ar(__v); __v; })
-#define readl(c)	({ u32 __v; __io_br(); __v = readl_cpu(c); __io_ar(__v); __v; })
-
-#define writeb(v, c)	({ __io_bw(); writeb_cpu((v), (c)); __io_aw(); })
-#define writew(v, c)	({ __io_bw(); writew_cpu((v), (c)); __io_aw(); })
-#define writel(v, c)	({ __io_bw(); writel_cpu((v), (c)); __io_aw(); })
-
-#ifdef CONFIG_64BIT
-#define readq(c)	({ u64 __v; __io_br(); __v = readq_cpu(c); __io_ar(__v); __v; })
-#define writeq(v, c)	({ __io_bw(); writeq_cpu((v), (c)); __io_aw(); })
-#endif
-
 #endif /* _ASM_RISCV_MMIO_H */
Signature · 1 line
2.34.1
#4 lore raw

Re: [PATCH 2/2] riscv,mmio: Use the generic implementation for the I/O accesses

Quoted 5 lines · Conor Dooley
Quoted 4 lines · Andrea Parri

The current implementation of readX(), writeX() and their "relaxed" variants, readX_relaxed() and writeX_relaxed(), matches the generic implementation; remove the redundant code.

Quoted 7 lines
Quoted 3 lines

No functional change intended.

This fails to build for (64-bit, I didn't check 32-bit) nommu:
arch/riscv/include/asm/timex.h:20:16: error: implicit declaration of function 'readq_relaxed' [-Werror=implicit-function-declaration] include/asm-generic/io.h:342:23: error: conflicting types for 'readq_relaxed'; have 'u64(const volatile void *)' {aka 'long long unsigned int(const volatile void *)'}

Thank you for the report, Conor. Looking at it.

Andrea

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

#5 lore raw
In reply to Andrea Parri
This series was applied to riscv/linux.git (fixes) by Palmer Dabbelt <[email protected]>:

Hello:

This series was applied to riscv/linux.git (fixes) by Palmer Dabbelt <[email protected]>:

Quoted 6 lines · On Tue, 11 Jul 2023 15:33:46 +0200 you wrote:

Andrea Parri (2):
riscv,mmio: Fix readX()-to-delay() ordering riscv,mmio: Use the generic implementation for the I/O accesses

 arch/riscv/include/asm/mmio.h | 72 ++++-------------------------------
 1 file changed, 8 insertions(+), 64 deletions(-)

Here is the summary with links:
- [1/2] riscv,mmio: Fix readX()-to-delay() ordering

    https://git.kernel.org/riscv/c/4eb2eb1b4c0e

- [2/2] riscv,mmio: Use the generic implementation for the I/O accesses (no matching commit)

You are awesome, thank you!

Signature · 9 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv