Skip to contentSkip to conversation

IPv6: add extack info for inet6_addr_add/del

PATCH In review Hangbin Liu 2 participants 3 messages Jul 19, 2023 – Jul 24, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 IPv6: add extack info for inet6_addr_add/del

Add extack info for inet6_addr_add(), ipv6_add_addr() and inet6_addr_del(), which would be useful for users to understand the problem without having to read kernel code.

---

BTW, please feel free to add comments if you think the extack message is not describe properly.

v2: Update extack msg for dead dev. Remove msg for NOBUFS error.
Add extack for ipv6_add_addr_hash()

---
 net/ipv6/addrconf.c | 71 +++++++++++++++++++++++++++++++--------------
 1 file changed, 50 insertions(+), 21 deletions(-)
net/ipv6/addrconf.c +50 -21
index e5213e598a04..4e0836d90e65 100644
@@ -1027,7 +1027,8 @@ static bool ipv6_chk_same_addr(struct net *net, const struct in6_addr *addr,
 	return false;
 }
 
-static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa)
+static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa,
+			      struct netlink_ext_ack *extack)
 {
 	struct net *net = dev_net(dev);
 	unsigned int hash = inet6_addr_hash(net, &ifa->addr);
@@ -1037,7 +1038,7 @@ static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa)
 
 	/* Ignore adding duplicate addresses on an interface */
 	if (ipv6_chk_same_addr(net, &ifa->addr, dev, hash)) {
-		netdev_dbg(dev, "ipv6_add_addr: already assigned\n");
+		NL_SET_ERR_MSG(extack, "ipv6_add_addr: already assigned");
 		err = -EEXIST;
 	} else {
 		hlist_add_head_rcu(&ifa->addr_lst, &net->ipv6.inet6_addr_lst[hash]);
@@ -1066,15 +1067,19 @@ ipv6_add_addr(struct inet6_dev *idev, struct ifa6_config *cfg,
 	     !(cfg->ifa_flags & IFA_F_MCAUTOJOIN)) ||
 	    (!(idev->dev->flags & IFF_LOOPBACK) &&
 	     !netif_is_l3_master(idev->dev) &&
-	     addr_type & IPV6_ADDR_LOOPBACK))
+	     addr_type & IPV6_ADDR_LOOPBACK)) {
+		NL_SET_ERR_MSG(extack, "Cannot assign requested address");
 		return ERR_PTR(-EADDRNOTAVAIL);
+	}
 
 	if (idev->dead) {
-		err = -ENODEV;			/*XXX*/
+		NL_SET_ERR_MSG(extack, "Device marked as dead");
+		err = -ENODEV;
 		goto out;
 	}
 
 	if (idev->cnf.disable_ipv6) {
+		NL_SET_ERR_MSG(extack, "IPv6 is disabled on this device");
 		err = -EACCES;
 		goto out;
 	}
@@ -1103,6 +1108,7 @@ ipv6_add_addr(struct inet6_dev *idev, struct ifa6_config *cfg,
 
 	f6i = addrconf_f6i_alloc(net, idev, cfg->pfx, false, gfp_flags);
 	if (IS_ERR(f6i)) {
+		NL_SET_ERR_MSG(extack, "Dest allocate failed");
 		err = PTR_ERR(f6i);
 		f6i = NULL;
 		goto out;
@@ -1140,7 +1146,7 @@ ipv6_add_addr(struct inet6_dev *idev, struct ifa6_config *cfg,
 
 	rcu_read_lock();
 
-	err = ipv6_add_addr_hash(idev->dev, ifa);
+	err = ipv6_add_addr_hash(idev->dev, ifa, extack);
 	if (err < 0) {
 		rcu_read_unlock();
 		goto out;
@@ -2488,18 +2494,22 @@ static void addrconf_add_mroute(struct net_device *dev)
 	ip6_route_add(&cfg, GFP_KERNEL, NULL);
 }
 
-static struct inet6_dev *addrconf_add_dev(struct net_device *dev)
+static struct inet6_dev *addrconf_add_dev(struct net_device *dev, struct netlink_ext_ack *extack)
 {
 	struct inet6_dev *idev;
 
 	ASSERT_RTNL();
 
 	idev = ipv6_find_idev(dev);
-	if (IS_ERR(idev))
+	if (IS_ERR(idev)) {
+		NL_SET_ERR_MSG(extack, "No such device");
 		return idev;
+	}
 
-	if (idev->cnf.disable_ipv6)
+	if (idev->cnf.disable_ipv6) {
+		NL_SET_ERR_MSG(extack, "IPv6 is disabled on this device");
 		return ERR_PTR(-EACCES);
+	}
 
 	/* Add default multicast route */
 	if (!(dev->flags & IFF_LOOPBACK) && !netif_is_l3_master(dev))
@@ -2919,21 +2929,29 @@ static int inet6_addr_add(struct net *net, int ifindex,
 
 	ASSERT_RTNL();
 
-	if (cfg->plen > 128)
+	if (cfg->plen > 128) {
+		NL_SET_ERR_MSG(extack, "IPv6 address prefix length larger than 128");
 		return -EINVAL;
+	}
 
 	/* check the lifetime */
-	if (!cfg->valid_lft || cfg->preferred_lft > cfg->valid_lft)
+	if (!cfg->valid_lft || cfg->preferred_lft > cfg->valid_lft) {
+		NL_SET_ERR_MSG(extack, "IPv6 address lifetime invalid");
 		return -EINVAL;
+	}
 
-	if (cfg->ifa_flags & IFA_F_MANAGETEMPADDR && cfg->plen != 64)
+	if (cfg->ifa_flags & IFA_F_MANAGETEMPADDR && cfg->plen != 64) {
+		NL_SET_ERR_MSG(extack, "IPv6 address with mngtmpaddr flag must have prefix length 64");
 		return -EINVAL;
+	}
 
 	dev = __dev_get_by_index(net, ifindex);
-	if (!dev)
+	if (!dev) {
+		NL_SET_ERR_MSG(extack, "Unable to find the interface");
 		return -ENODEV;
+	}
 
-	idev = addrconf_add_dev(dev);
+	idev = addrconf_add_dev(dev, extack);
 	if (IS_ERR(idev))
 		return PTR_ERR(idev);
 
@@ -2941,8 +2959,10 @@ static int inet6_addr_add(struct net *net, int ifindex,
 		int ret = ipv6_mc_config(net->ipv6.mc_autojoin_sk,
 					 true, cfg->pfx, ifindex);
 
-		if (ret < 0)
+		if (ret < 0) {
+			NL_SET_ERR_MSG(extack, "Multicast auto join failed");
 			return ret;
+		}
 	}
 
 	cfg->scope = ipv6_addr_scope(cfg->pfx);
@@ -2999,22 +3019,29 @@ static int inet6_addr_add(struct net *net, int ifindex,
 }
 
 static int inet6_addr_del(struct net *net, int ifindex, u32 ifa_flags,
-			  const struct in6_addr *pfx, unsigned int plen)
+			  const struct in6_addr *pfx, unsigned int plen,
+			  struct netlink_ext_ack *extack)
 {
 	struct inet6_ifaddr *ifp;
 	struct inet6_dev *idev;
 	struct net_device *dev;
 
-	if (plen > 128)
+	if (plen > 128) {
+		NL_SET_ERR_MSG(extack, "IPv6 address prefix length larger than 128");
 		return -EINVAL;
+	}
 
 	dev = __dev_get_by_index(net, ifindex);
-	if (!dev)
+	if (!dev) {
+		NL_SET_ERR_MSG(extack, "Unable to find the interface");
 		return -ENODEV;
+	}
 
 	idev = __in6_dev_get(dev);
-	if (!idev)
+	if (!idev) {
+		NL_SET_ERR_MSG(extack, "No such address on the device");
 		return -ENXIO;
+	}
 
 	read_lock_bh(&idev->lock);
 	list_for_each_entry(ifp, &idev->addr_list, if_list) {
@@ -3037,6 +3064,8 @@ static int inet6_addr_del(struct net *net, int ifindex, u32 ifa_flags,
 		}
 	}
 	read_unlock_bh(&idev->lock);
+
+	NL_SET_ERR_MSG(extack, "IPv6 address not found");
 	return -EADDRNOTAVAIL;
 }
 
@@ -3079,7 +3108,7 @@ int addrconf_del_ifaddr(struct net *net, void __user *arg)
 
 	rtnl_lock();
 	err = inet6_addr_del(net, ireq.ifr6_ifindex, 0, &ireq.ifr6_addr,
-			     ireq.ifr6_prefixlen);
+			     ireq.ifr6_prefixlen, NULL);
 	rtnl_unlock();
 	return err;
 }
@@ -3378,7 +3407,7 @@ static void addrconf_dev_config(struct net_device *dev)
 		return;
 	}
 
-	idev = addrconf_add_dev(dev);
+	idev = addrconf_add_dev(dev, NULL);
 	if (IS_ERR(idev))
 		return;
 
@@ -4692,7 +4721,7 @@ inet6_rtm_deladdr(struct sk_buff *skb, struct nlmsghdr *nlh,
 	ifa_flags &= IFA_F_MANAGETEMPADDR;
 
 	return inet6_addr_del(net, ifm->ifa_index, ifa_flags, pfx,
-			      ifm->ifa_prefixlen);
+			      ifm->ifa_prefixlen, extack);
 }
 
 static int modify_prefix_route(struct inet6_ifaddr *ifp,
Signature · 1 line
2.38.1
#1 lore raw
Quoted 15 lines · Hangbin Liu
net/ipv6/addrconf.c +2 -1
index e5213e598a04..4e0836d90e65 100644
@@ -1027,7 +1027,8 @@ static bool ipv6_chk_same_addr(struct net *net, const struct in6_addr *addr,
 	return false;
 }
 
-static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa)
+static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa,
+			      struct netlink_ext_ack *extack)
 {
 	struct net *net = dev_net(dev);
 	unsigned int hash = inet6_addr_hash(net, &ifa->addr);

net/ipv6/addrconf.c static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa) · line 1041

Quoted 5 lines
net/ipv6/addrconf.c +1 -1
@@ -1037,7 +1038,7 @@ static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa)
 
 	/* Ignore adding duplicate addresses on an interface */
 	if (ipv6_chk_same_addr(net, &ifa->addr, dev, hash)) {
-		netdev_dbg(dev, "ipv6_add_addr: already assigned\n");
+		NL_SET_ERR_MSG(extack, "ipv6_add_addr: already assigned");

How do you trigger it?

# ip link add name dummy10 up type dummy
# ip address add 2001:db8:1::1/64 dev dummy10
# ip address add 2001:db8:1::1/64 dev dummy10
RTNETLINK answers: File exists

Better to add extack in inet6_rtm_newaddr():

if (nlh->nlmsg_flags & NLM_F_EXCL ||

    !(nlh->nlmsg_flags & NLM_F_REPLACE))
	err = -EEXIST;

else
err = inet6_addr_modify(net, ifa, &cfg)

Quoted 6 lines
net/ipv6/addrconf.c +0 -0
 		err = -EEXIST;
 	} else {
 		hlist_add_head_rcu(&ifa->addr_lst, &net->ipv6.inet6_addr_lst[hash]);
@@ -1066,15 +1067,19 @@ ipv6_add_addr(struct inet6_dev *idev, struct ifa6_config *cfg,
 	     !(cfg->ifa_flags & IFA_F_MCAUTOJOIN)) ||
 	    (!(idev->dev->flags & IFF_LOOPBACK) &&

net/ipv6/addrconf.c ipv6_add_addr(struct inet6_dev *idev, struct ifa6_config *cfg, · line 1076

Quoted 10 lines
net/ipv6/addrconf.c +4 -2
 	     !netif_is_l3_master(idev->dev) &&
-	     addr_type & IPV6_ADDR_LOOPBACK))
+	     addr_type & IPV6_ADDR_LOOPBACK)) {
+		NL_SET_ERR_MSG(extack, "Cannot assign requested address");
 		return ERR_PTR(-EADDRNOTAVAIL);
+	}
 
 	if (idev->dead) {
-		err = -ENODEV;			/*XXX*/
+		NL_SET_ERR_MSG(extack, "Device marked as dead");

This seems to be a transient state when IPv6 device is being deleted. See addrconf_ifdown(). Maybe "IPv6 device is going away".

Quoted 10 lines
net/ipv6/addrconf.c +2 -0
+		err = -ENODEV;
 		goto out;
 	}
 
 	if (idev->cnf.disable_ipv6) {
+		NL_SET_ERR_MSG(extack, "IPv6 is disabled on this device");
 		err = -EACCES;
 		goto out;
 	}

net/ipv6/addrconf.c ipv6_add_addr(struct inet6_dev *idev, struct ifa6_config *cfg, · line 1111

Quoted 4 lines
net/ipv6/addrconf.c +1 -0
@@ -1103,6 +1108,7 @@ ipv6_add_addr(struct inet6_dev *idev, struct ifa6_config *cfg,
 
 	f6i = addrconf_f6i_alloc(net, idev, cfg->pfx, false, gfp_flags);
 	if (IS_ERR(f6i)) {
+		NL_SET_ERR_MSG(extack, "Dest allocate failed");

The only thing that can fail in this function is ip6_route_info_create() which already has an extack argument. Better to pass extack to addrconf_f6i_alloc() and get a more accurate error message.

Quoted 17 lines
net/ipv6/addrconf.c +1 -2
 		err = PTR_ERR(f6i);
 		f6i = NULL;
 		goto out;
@@ -1140,7 +1146,7 @@ ipv6_add_addr(struct inet6_dev *idev, struct ifa6_config *cfg,
 
 	rcu_read_lock();
 
-	err = ipv6_add_addr_hash(idev->dev, ifa);
+	err = ipv6_add_addr_hash(idev->dev, ifa, extack);
 	if (err < 0) {
 		rcu_read_unlock();
 		goto out;
@@ -2488,18 +2494,22 @@ static void addrconf_add_mroute(struct net_device *dev)
 	ip6_route_add(&cfg, GFP_KERNEL, NULL);
 }
 
-static struct inet6_dev *addrconf_add_dev(struct net_device *dev)

net/ipv6/addrconf.c static void addrconf_add_mroute(struct net_device *dev) · line 2505

Quoted 10 lines
net/ipv6/addrconf.c +3 -1
+static struct inet6_dev *addrconf_add_dev(struct net_device *dev, struct netlink_ext_ack *extack)
 {
 	struct inet6_dev *idev;
 
 	ASSERT_RTNL();
 
 	idev = ipv6_find_idev(dev);
-	if (IS_ERR(idev))
+	if (IS_ERR(idev)) {
+		NL_SET_ERR_MSG(extack, "No such device");

This is not very accurate. See comment below regarding __in6_dev_get().

Quoted 12 lines
net/ipv6/addrconf.c +4 -1
 		return idev;
+	}
 
-	if (idev->cnf.disable_ipv6)
+	if (idev->cnf.disable_ipv6) {
+		NL_SET_ERR_MSG(extack, "IPv6 is disabled on this device");
 		return ERR_PTR(-EACCES);
+	}
 
 	/* Add default multicast route */
 	if (!(dev->flags & IFF_LOOPBACK) && !netif_is_l3_master(dev))

net/ipv6/addrconf.c static int inet6_addr_add(struct net *net, int ifindex, · line 2933

Quoted 6 lines
net/ipv6/addrconf.c +2 -1
@@ -2919,21 +2929,29 @@ static int inet6_addr_add(struct net *net, int ifindex,
 
 	ASSERT_RTNL();
 
-	if (cfg->plen > 128)
+	if (cfg->plen > 128) {
+		NL_SET_ERR_MSG(extack, "IPv6 address prefix length larger than 128");

For RTM_NEWROUTE IPv6 code just says "Invalid prefix length", so might as well be consistent with it. Also, I see IPv4 doesn't have such messages for its RTM_{NEW,DEL}ADDR messages. If you think it's useful for IPv6, then I suggest also adding it to IPv4.

Same comment for delete path.

net/ipv6/addrconf.c static int inet6_addr_add(struct net *net, int ifindex, · line 2944

Quoted 13 lines
net/ipv6/addrconf.c +6 -2
 		return -EINVAL;
+	}
 
 	/* check the lifetime */
-	if (!cfg->valid_lft || cfg->preferred_lft > cfg->valid_lft)
+	if (!cfg->valid_lft || cfg->preferred_lft > cfg->valid_lft) {
+		NL_SET_ERR_MSG(extack, "IPv6 address lifetime invalid");
 		return -EINVAL;
+	}
 
-	if (cfg->ifa_flags & IFA_F_MANAGETEMPADDR && cfg->plen != 64)
+	if (cfg->ifa_flags & IFA_F_MANAGETEMPADDR && cfg->plen != 64) {
+		NL_SET_ERR_MSG(extack, "IPv6 address with mngtmpaddr flag must have prefix length 64");

\"mngtmpaddr\"
a prefix length of

net/ipv6/addrconf.c static int inet6_addr_add(struct net *net, int ifindex, · line 2950

Quoted 7 lines
net/ipv6/addrconf.c +3 -1
 		return -EINVAL;
+	}
 
 	dev = __dev_get_by_index(net, ifindex);
-	if (!dev)
+	if (!dev) {
+		NL_SET_ERR_MSG(extack, "Unable to find the interface");

This is already checked in the netlink path (see inet6_rtm_newaddr()), so this message will never be displayed. If you want to see it, then add it in inet6_rtm_newaddr().

Quoted 39 lines
net/ipv6/addrconf.c +10 -4
 		return -ENODEV;
+	}
 
-	idev = addrconf_add_dev(dev);
+	idev = addrconf_add_dev(dev, extack);
 	if (IS_ERR(idev))
 		return PTR_ERR(idev);
 
@@ -2941,8 +2959,10 @@ static int inet6_addr_add(struct net *net, int ifindex,
 		int ret = ipv6_mc_config(net->ipv6.mc_autojoin_sk,
 					 true, cfg->pfx, ifindex);
 
-		if (ret < 0)
+		if (ret < 0) {
+			NL_SET_ERR_MSG(extack, "Multicast auto join failed");
 			return ret;
+		}
 	}
 
 	cfg->scope = ipv6_addr_scope(cfg->pfx);
@@ -2999,22 +3019,29 @@ static int inet6_addr_add(struct net *net, int ifindex,
 }
 
 static int inet6_addr_del(struct net *net, int ifindex, u32 ifa_flags,
-			  const struct in6_addr *pfx, unsigned int plen)
+			  const struct in6_addr *pfx, unsigned int plen,
+			  struct netlink_ext_ack *extack)
 {
 	struct inet6_ifaddr *ifp;
 	struct inet6_dev *idev;
 	struct net_device *dev;
 
-	if (plen > 128)
+	if (plen > 128) {
+		NL_SET_ERR_MSG(extack, "IPv6 address prefix length larger than 128");
 		return -EINVAL;
+	}
 
 	dev = __dev_get_by_index(net, ifindex);

net/ipv6/addrconf.c static int inet6_addr_add(struct net *net, int ifindex, · line 3042

Quoted 10 lines
net/ipv6/addrconf.c +5 -2
-	if (!dev)
+	if (!dev) {
+		NL_SET_ERR_MSG(extack, "Unable to find the interface");
 		return -ENODEV;
+	}
 
 	idev = __in6_dev_get(dev);
-	if (!idev)
+	if (!idev) {
+		NL_SET_ERR_MSG(extack, "No such address on the device");

A more accurate message would be "IPv6 is disabled on this device". See ndisc_allow_add().

Quoted 44 lines
net/ipv6/addrconf.c +6 -3
 		return -ENXIO;
+	}
 
 	read_lock_bh(&idev->lock);
 	list_for_each_entry(ifp, &idev->addr_list, if_list) {
@@ -3037,6 +3064,8 @@ static int inet6_addr_del(struct net *net, int ifindex, u32 ifa_flags,
 		}
 	}
 	read_unlock_bh(&idev->lock);
+
+	NL_SET_ERR_MSG(extack, "IPv6 address not found");
 	return -EADDRNOTAVAIL;
 }
 
@@ -3079,7 +3108,7 @@ int addrconf_del_ifaddr(struct net *net, void __user *arg)
 
 	rtnl_lock();
 	err = inet6_addr_del(net, ireq.ifr6_ifindex, 0, &ireq.ifr6_addr,
-			     ireq.ifr6_prefixlen);
+			     ireq.ifr6_prefixlen, NULL);
 	rtnl_unlock();
 	return err;
 }
@@ -3378,7 +3407,7 @@ static void addrconf_dev_config(struct net_device *dev)
 		return;
 	}
 
-	idev = addrconf_add_dev(dev);
+	idev = addrconf_add_dev(dev, NULL);
 	if (IS_ERR(idev))
 		return;
 
@@ -4692,7 +4721,7 @@ inet6_rtm_deladdr(struct sk_buff *skb, struct nlmsghdr *nlh,
 	ifa_flags &= IFA_F_MANAGETEMPADDR;
 
 	return inet6_addr_del(net, ifm->ifa_index, ifa_flags, pfx,
-			      ifm->ifa_prefixlen);
+			      ifm->ifa_prefixlen, extack);
 }
 
 static int modify_prefix_route(struct inet6_ifaddr *ifp,
Signature · 1 line
2.38.1
#2 lore raw
Quoted 20 lines · Ido Schimmel

net/ipv6/addrconf.c static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa) · line 1041

Quoted 12 lines
net/ipv6/addrconf.c +3 -2
-static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa)
+static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa,
+			      struct netlink_ext_ack *extack)
 {
 	struct net *net = dev_net(dev);
 	unsigned int hash = inet6_addr_hash(net, &ifa->addr);
@@ -1037,7 +1038,7 @@ static int ipv6_add_addr_hash(struct net_device *dev, struct inet6_ifaddr *ifa)
 
 	/* Ignore adding duplicate addresses on an interface */
 	if (ipv6_chk_same_addr(net, &ifa->addr, dev, hash)) {
-		netdev_dbg(dev, "ipv6_add_addr: already assigned\n");
+		NL_SET_ERR_MSG(extack, "ipv6_add_addr: already assigned");

How do you trigger it?

# ip link add name dummy10 up type dummy
# ip address add 2001:db8:1::1/64 dev dummy10
# ip address add 2001:db8:1::1/64 dev dummy10
RTNETLINK answers: File exists
Quoted 7 lines

Better to add extack in inet6_rtm_newaddr():

if (nlh->nlmsg_flags & NLM_F_EXCL ||

    !(nlh->nlmsg_flags & NLM_F_REPLACE))
	err = -EEXIST;

else
err = inet6_addr_modify(net, ifa, &cfg)

Thanks. Since the dup addr checking will be done on inet6_rtm_newaddr(). I will remove the extack msg in ipv6_add_addr_hash().

Quoted 9 lines

net/ipv6/addrconf.c ipv6_add_addr(struct inet6_dev *idev, struct ifa6_config *cfg, · line 1111

Quoted 5 lines
net/ipv6/addrconf.c +1 -0
@@ -1103,6 +1108,7 @@ ipv6_add_addr(struct inet6_dev *idev, struct ifa6_config *cfg,
 
 	f6i = addrconf_f6i_alloc(net, idev, cfg->pfx, false, gfp_flags);
 	if (IS_ERR(f6i)) {
+		NL_SET_ERR_MSG(extack, "Dest allocate failed");

The only thing that can fail in this function is ip6_route_info_create() which already has an extack argument. Better to pass extack to addrconf_f6i_alloc() and get a more accurate error message.

OK, I will update the patch.

Quoted 8 lines

net/ipv6/addrconf.c static int inet6_addr_add(struct net *net, int ifindex, · line 2933

Quoted 3 lines
net/ipv6/addrconf.c +2 -1
-	if (cfg->plen > 128)
+	if (cfg->plen > 128) {
+		NL_SET_ERR_MSG(extack, "IPv6 address prefix length larger than 128");

For RTM_NEWROUTE IPv6 code just says "Invalid prefix length", so might as well be consistent with it. Also, I see IPv4 doesn't have such messages for its RTM_{NEW,DEL}ADDR messages. If you think it's useful for IPv6, then I suggest also adding it to IPv4.

OK. But since this patch is for IPv6. I will post another patch for IPv4 specifically.

Thanks
Hangbin