serial: core: Add sysfs links for serial core port instances for ttys
PATCH 1/1 serial: core: Add sysfs links for serial core port instances for ttys
Let's allow the userspace to find out the tty name for a serial core controller id if a tty exists. This can be done with:
$ grep DEVNAME /sys/bus/serial-base/devices/port*/tty/uevent /sys/bus/serial-base/devices/port.00:04.0/tty/uevent:DEVNAME=ttyS0 /sys/bus/serial-base/devices/port.serial8250.1/tty/uevent:DEVNAME=ttyS1 /sys/bus/serial-base/devices/port.serial8250.2/tty/uevent:DEVNAME=ttyS2 /sys/bus/serial-base/devices/port.serial8250.3/tty/uevent:DEVNAME=ttyS3
And with this, we can add /dev/serial/by-id symlinks to the serial port device instances so we can start using serial core port addressing in addition to the legacy ttyS naming.
The naming we can use is dev_name:0.0 where 0.0 are the serial core controller id and port id, so for the ttyS0 example above the naming would be 00:04.0:0.0.
---
Note that this depends on fix for serial core port ids patch "[PATCH] serial: core: Fix serial core port id to not use port->line"
--- drivers/tty/serial/serial_core.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
drivers/tty/serial/serial_core.c +19 -0
@@ -3371,6 +3371,8 @@ static int serial_core_add_preferred_console(struct uart_driver *drv,int serial_core_register_port (struct uart_driver *drv,struct uart_port *port) {struct serial_ctrl_device *ctrl_dev, *new_ctrl_dev =NULL ; +struct uart_match match = {port, drv}; +struct device *tty_dev;int ret;mutex_lock (&port_mutex);
@@ -3411,10 +3413,21 @@ int serial_core_register_port(struct uart_driver *drv, struct uart_port *port) port->flags &= ~UPF_DEAD ; + tty_dev =device_find_child (port->dev, &match, serial_match_port); +if (tty_dev) { + ret =sysfs_create_link (&port->port_dev->dev.kobj, &tty_dev->kobj, +"tty" ); +if (ret) + goto err_remove_port; + } +mutex_unlock (&port_mutex);return 0 ; +err_remove_port: +serial_core_remove_one_port (drv, port); + err_unregister_port_dev:serial_base_port_device_remove (port->port_dev);
@@ -3436,12 +3449,18 @@ void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *portstruct device *phys_dev = port->dev;struct serial_port_device *port_dev = port->port_dev;struct serial_ctrl_device *ctrl_dev =serial_core_get_ctrl_dev (port_dev); +struct uart_match match = {port, drv};int ctrl_id = port->ctrl_id; +struct device *tty_dev;mutex_lock (&port_mutex); port->flags |=UPF_DEAD ; + tty_dev =device_find_child (port->dev, &match, serial_match_port); +if (tty_dev) +sysfs_remove_link (&port->port_dev->dev.kobj,"tty" ); +serial_core_remove_one_port (drv, port);/* Note that struct uart_port *port is no longer valid at this point */
Signature · 1 line
2.41.0
Quoted 8 lines · Tony Lindgren
Let's allow the userspace to find out the tty name for a serial core controller id if a tty exists. This can be done with:
$ grep DEVNAME /sys/bus/serial-base/devices/port*/tty/uevent /sys/bus/serial-base/devices/port.00:04.0/tty/uevent:DEVNAME=ttyS0 /sys/bus/serial-base/devices/port.serial8250.1/tty/uevent:DEVNAME=ttyS1 /sys/bus/serial-base/devices/port.serial8250.2/tty/uevent:DEVNAME=ttyS2 /sys/bus/serial-base/devices/port.serial8250.3/tty/uevent:DEVNAME=ttyS3
What part is the controller ID here?
We also have something in procfs (I don't remember what info exactly is there).
Quoted 7 lines
And with this, we can add
/dev/serial/by-idsymlinks to the serial port device instances so we can start using serial core port addressing in addition to the legacy ttyS naming.The naming we can use is dev_name:0.0 where 0.0 are the serial core controller id and port id, so for the ttyS0 example above the naming would be 00:04.0:0.0.
This is interesting idea. But any hint why it can be useful?
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 11 lines · Andy Shevchenko
Quoted 8 lines · Tony Lindgren
Let's allow the userspace to find out the tty name for a serial core controller id if a tty exists. This can be done with:
$ grep DEVNAME /sys/bus/serial-base/devices/port*/tty/uevent /sys/bus/serial-base/devices/port.00:04.0/tty/uevent:DEVNAME=ttyS0 /sys/bus/serial-base/devices/port.serial8250.1/tty/uevent:DEVNAME=ttyS1 /sys/bus/serial-base/devices/port.serial8250.2/tty/uevent:DEVNAME=ttyS2 /sys/bus/serial-base/devices/port.serial8250.3/tty/uevent:DEVNAME=ttyS3What part is the controller ID here?
Oh looks like controller id it's missing in the name, I'll send a fix for that.
Quoted 1 line
We also have something in procfs (I don't remember what info exactly is there).
Do you mean /proc/devices?
Quoted 9 lines
Quoted 7 lines
And with this, we can add
/dev/serial/by-idsymlinks to the serial port device instances so we can start using serial core port addressing in addition to the legacy ttyS naming.The naming we can use is dev_name:0.0 where 0.0 are the serial core controller id and port id, so for the ttyS0 example above the naming would be 00:04.0:0.0.
This is interesting idea. But any hint why it can be useful?
If you have lots of serial ports and we are stuck with adding aliases for the ports in the dts files where the ttyS naming and ordering does not really help or may not necessarily make sense if the ports are on different buses or domains. With CONFIG_SERIAL_8250_RUNTIME_UARTS=4, the ttyS naming is only needed for the legacy ports really.
Regards,
Tony
Quoted 11 lines · Tony Lindgren
Quoted 10 lines · Andy Shevchenko
Quoted 8 lines · Tony Lindgren
Let's allow the userspace to find out the tty name for a serial core controller id if a tty exists. This can be done with:
$ grep DEVNAME /sys/bus/serial-base/devices/port*/tty/uevent /sys/bus/serial-base/devices/port.00:04.0/tty/uevent:DEVNAME=ttyS0 /sys/bus/serial-base/devices/port.serial8250.1/tty/uevent:DEVNAME=ttyS1 /sys/bus/serial-base/devices/port.serial8250.2/tty/uevent:DEVNAME=ttyS2 /sys/bus/serial-base/devices/port.serial8250.3/tty/uevent:DEVNAME=ttyS3
Quoted 8 lines
Quoted 1 line
What part is the controller ID here?
Oh looks like controller id it's missing in the name, I'll send a fix for that.
Quoted 1 line
We also have something in procfs (I don't remember what info exactly is there).
Do you mean
/proc/devices?
Something tty specific, /proc/tty/, but I had a look and it seems for another stuff.
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
And with this, we can add
/dev/serial/by-idsymlinks to the serial port device instances so we can start using serial core port addressing in addition to the legacy ttyS naming.The naming we can use is dev_name:0.0 where 0.0 are the serial core controller id and port id, so for the ttyS0 example above the naming would be 00:04.0:0.0.
Quoted 7 lines
Quoted 1 line
This is interesting idea. But any hint why it can be useful?
If you have lots of serial ports and we are stuck with adding aliases for the ports in the dts files where the ttyS naming and ordering does not really help or may not necessarily make sense if the ports are on different buses or domains. With
CONFIG_SERIAL_8250_RUNTIME_UARTS=4, the ttyS naming is only needed for the legacy ports really.
I see. Does it fix the long standing issue with ttyS enumeration (on x86 at least) when depending on the presence of the legacy ports the HSUART (high speed) can preempt the legacy placeholders (ttyS0..ttyS3)?
To me sounds like it may very well do fix it and I would be glad to see that in the commit message (as selling point) and in documentation.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 17 lines · Andy Shevchenko
Quoted 16 lines · Tony Lindgren
Quoted 11 lines · Andy Shevchenko
Quoted 8 lines · Tony Lindgren
Let's allow the userspace to find out the tty name for a serial core controller id if a tty exists. This can be done with:
$ grep DEVNAME /sys/bus/serial-base/devices/port*/tty/uevent /sys/bus/serial-base/devices/port.00:04.0/tty/uevent:DEVNAME=ttyS0 /sys/bus/serial-base/devices/port.serial8250.1/tty/uevent:DEVNAME=ttyS1 /sys/bus/serial-base/devices/port.serial8250.2/tty/uevent:DEVNAME=ttyS2 /sys/bus/serial-base/devices/port.serial8250.3/tty/uevent:DEVNAME=ttyS3What part is the controller ID here?
Oh looks like controller id it's missing in the name, I'll send a fix for that.
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
We also have something in procfs (I don't remember what info exactly is there).
Do you mean
/proc/devices?Something tty specific,
/proc/tty/, but I had a look and it seems for another stuff.
OK
Quoted 16 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
And with this, we can add
/dev/serial/by-idsymlinks to the serial port device instances so we can start using serial core port addressing in addition to the legacy ttyS naming.The naming we can use is dev_name:0.0 where 0.0 are the serial core controller id and port id, so for the ttyS0 example above the naming would be 00:04.0:0.0.
Quoted 7 lines
Quoted 1 line
This is interesting idea. But any hint why it can be useful?
If you have lots of serial ports and we are stuck with adding aliases for the ports in the dts files where the ttyS naming and ordering does not really help or may not necessarily make sense if the ports are on different buses or domains. With
CONFIG_SERIAL_8250_RUNTIME_UARTS=4, the ttyS naming is only needed for the legacy ports really.
Quoted 6 lines
I see. Does it fix the long standing issue with ttyS enumeration (on x86 at least) when depending on the presence of the legacy ports the HSUART (high speed) can preempt the legacy placeholders (ttyS0..ttyS3)?
To me sounds like it may very well do fix it and I would be glad to see that in the commit message (as selling point) and in documentation.
It won't affect how ttyS0..ttyS3 get assigned, but it helps finding your HSUART instance with DEVNAME:0.0 style addressing. So you don't need to care what ttyS number the port has. If you have such a test case maybe give it a try.
Regards,
Tony
Quoted 4 lines · Tony Lindgren
Quoted 3 lines · Andy Shevchenko
Quoted 2 lines · Tony Lindgren
Quoted 1 line · Andy Shevchenko
On Wed, Jul 19, 2023 at 08:16:11AM +0300, Tony Lindgren wrote:
...
Quoted 20 lines
Quoted 20 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
And with this, we can add
/dev/serial/by-idsymlinks to the serial port device instances so we can start using serial core port addressing in addition to the legacy ttyS naming.The naming we can use is dev_name:0.0 where 0.0 are the serial core controller id and port id, so for the ttyS0 example above the naming would be 00:04.0:0.0.
Quoted 7 lines
Quoted 1 line
This is interesting idea. But any hint why it can be useful?
If you have lots of serial ports and we are stuck with adding aliases for the ports in the dts files where the ttyS naming and ordering does not really help or may not necessarily make sense if the ports are on different buses or domains. With
CONFIG_SERIAL_8250_RUNTIME_UARTS=4, the ttyS naming is only needed for the legacy ports really.I see. Does it fix the long standing issue with ttyS enumeration (on x86 at least) when depending on the presence of the legacy ports the HSUART (high speed) can preempt the legacy placeholders (ttyS0..ttyS3)?
Quoted 7 lines
Quoted 2 lines
To me sounds like it may very well do fix it and I would be glad to see that in the commit message (as selling point) and in documentation.
It won't affect how ttyS0..ttyS3 get assigned, but it helps finding your HSUART instance with DEVNAME:0.0 style addressing. So you don't need to care what ttyS number the port has. If you have such a test case maybe give it a try.
Exactly, the problem (currently) is, that depending on the BIOS settings the kernel can't use the same command line and this is quite a PITA for our customers!
As far as we can specify hardware (path) to the console, it will be so cool and hopefully solves this very long standing issue.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 36 lines · Andy Shevchenko
Quoted 4 lines · Tony Lindgren
Quoted 3 lines · Andy Shevchenko
Quoted 2 lines · Tony Lindgren
Quoted 1 line · Andy Shevchenko
On Wed, Jul 19, 2023 at 08:16:11AM +0300, Tony Lindgren wrote:
...
Quoted 20 lines
Quoted 20 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
And with this, we can add
/dev/serial/by-idsymlinks to the serial port device instances so we can start using serial core port addressing in addition to the legacy ttyS naming.The naming we can use is dev_name:0.0 where 0.0 are the serial core controller id and port id, so for the ttyS0 example above the naming would be 00:04.0:0.0.
Quoted 7 lines
Quoted 1 line
This is interesting idea. But any hint why it can be useful?
If you have lots of serial ports and we are stuck with adding aliases for the ports in the dts files where the ttyS naming and ordering does not really help or may not necessarily make sense if the ports are on different buses or domains. With
CONFIG_SERIAL_8250_RUNTIME_UARTS=4, the ttyS naming is only needed for the legacy ports really.I see. Does it fix the long standing issue with ttyS enumeration (on x86 at least) when depending on the presence of the legacy ports the HSUART (high speed) can preempt the legacy placeholders (ttyS0..ttyS3)?
Quoted 7 lines
Quoted 2 lines
To me sounds like it may very well do fix it and I would be glad to see that in the commit message (as selling point) and in documentation.
It won't affect how ttyS0..ttyS3 get assigned, but it helps finding your HSUART instance with DEVNAME:0.0 style addressing. So you don't need to care what ttyS number the port has. If you have such a test case maybe give it a try.
Quoted 6 lines
Exactly, the problem (currently) is, that depending on the BIOS settings the kernel can't use the same command line and this is quite a PITA for our customers!
As far as we can specify hardware (path) to the console, it will be so cool and hopefully solves this very long standing issue.
OK great, I'll update the patch description for next revision.
Regards,
Tony