extensions: libipt_icmp: Fix confusion between 255/255 and any
Phil Sutter
reviewerPATCH 1/3 extensions: libipt_icmp: Fix confusion between 255/255 and any
Per definition, ICMP type "any" is type 255 and the full range of codes (0-255). Save callback though ignored the actual code values, printing "any" for every type 255 match. This at least confuses users as they can't find their rule added as '--icmp-type 255/255' anymore.
It is not entirely clear what the fixed commit was trying to establish, but the save output is certainly not correct (especially since print callback gets things right).
--- extensions/libipt_icmp.c | 3 ++- extensions/libipt_icmp.t | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-)
extensions/libipt_icmp.c +2 -1
@@ -108,7 +108,8 @@ static void icmp_save(const void *ip, const struct xt_entry_match *match)printf (" !" );/* special hack for 'any' case */ -if (icmp->type ==0xFF ) { +if (icmp->type ==0xFF && + icmp->code[0 ] ==0 && icmp->code[1 ] ==0xFF ) {printf (" --icmp-type any" ); }else {printf (" --icmp-type %u" , icmp->type);
extensions/libipt_icmp.t +2 -0
@@ -13,3 +13,5 @@ # we accept "iptables -I INPUT -p tcp -m tcp", why not this below? # ERROR: cannot load: iptables -A INPUT -p icmp -m icmp # -p icmp -m icmp;=;OK +-p icmp -m icmp --icmp-type 255/255;=;OK +-p icmp -m icmp --icmp-type 255/0:255;-p icmp -m icmp --icmp-type any;OK
Signature · 1 line
2.40.0
Phil Sutter
reviewerPATCH 2/3 extensions: libipt_icmp: --icmp-type is not mandatory
The init callback sets things up for us, not specifying --icmp-type results in an '--icmp-type any' match which seems perfectly fine.
--- extensions/libipt_icmp.c | 2 +- extensions/libipt_icmp.t | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-)
extensions/libipt_icmp.c +1 -1
@@ -31,7 +31,7 @@ static void icmp_help(void)static const struct xt_option_entry icmp_opts[] = { {.name ="icmp-type" , .id =O_ICMP_TYPE , .type =XTTYPE_STRING , - .flags =XTOPT_MAND |XTOPT_INVERT }, + .flags =XTOPT_INVERT },XTOPT_TABLEEND , };
extensions/libipt_icmp.t +1 -3
@@ -10,8 +10,6 @@ # ERROR: cannot load: iptables -A INPUT -p icmp -m icmp --icmp-type destination-unreachable/network-unreachable # -p icmp -m icmp --icmp-type destination-unreachable/network-unreachable;=;OK -m icmp;;FAIL -# we accept "iptables -I INPUT -p tcp -m tcp", why not this below? -# ERROR: cannot load: iptables -A INPUT -p icmp -m icmp -# -p icmp -m icmp;=;OK +-p icmp -m icmp;-p icmp -m icmp --icmp-type any;OK -p icmp -m icmp --icmp-type 255/255;=;OK -p icmp -m icmp --icmp-type 255/0:255;-p icmp -m icmp --icmp-type any;OK
Signature · 1 line
2.40.0
Phil Sutter
reviewerPATCH 3/3 tests: libipt_icmp.t: Enable tests with numeric output
In reply to Phil SutterUnrelated to the question whether numeric (save) output is desired or not, enable the tests and expect the known format.
Using --list without --numeric prints the names, BTW.
--- extensions/libipt_icmp.t | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
extensions/libipt_icmp.t +3 -6
@@ -1,11 +1,8 @@ :INPUT,FORWARD,OUTPUT -p icmp -m icmp --icmp-type any;=;OK -# output uses the number, better use the name? -# ERROR: cannot find: iptables -I INPUT -p icmp -m icmp --icmp-type echo-reply -# -p icmp -m icmp --icmp-type echo-reply;=;OK -# output uses the number, better use the name? -# ERROR: annot find: iptables -I INPUT -p icmp -m icmp --icmp-type destination-unreachable -# -p icmp -m icmp --icmp-type destination-unreachable;=;OK +# XXX: output uses the number, better use the name? +-p icmp -m icmp --icmp-type echo-reply;-p icmp -m icmp --icmp-type 0;OK +-p icmp -m icmp --icmp-type destination-unreachable;-p icmp -m icmp --icmp-type 3;OK # it does not acccept name/name, should we accept this? # ERROR: cannot load: iptables -A INPUT -p icmp -m icmp --icmp-type destination-unreachable/network-unreachable # -p icmp -m icmp --icmp-type destination-unreachable/network-unreachable;=;OK
Signature · 1 line
2.40.0
Quoted 6 lines · Phil Sutter
It is not entirely clear what the fixed commit was trying to establish, but the save output is certainly not correct (especially since print callback gets things right).
Fixes fc9237da4e845 ("Fix '-p icmp -m icmp' issue (Closes: #37)")
"""(libipt_icmp.c):
* Up to kernel <=2.4.20 the problem was:
* '-p icmp ' matches all icmp packets
* '-p icmp -m icmp' matches _only_ ICMP type 0 :(
* This is now fixed by initializing the field * to icmp type 0xFF
"""
But also:
v1.2.7a-35-gfc9237da missed touching *libip6t_icmp6.c*, so it was never updated with the same "bug".
In icmp6, --icmpv6-type was (and still is to this date) mandatory, which means -p icmp6 -m icmp6 would *not* implicitly go match ICMP(v6) type 0 like its IPv4 counterpart.
Then, in v1.4.10-115-g1b8db4f4, libipt_icmp.c more or less accidentally gained XTOPT_MAND (possible spill from IPv6 code), therefore -p icmp -m icmp would also stop implicitly doing ICMP type "any".
Phil Sutter
reviewerQuoted 20 lines · Jan Engelhardt
Quoted 6 lines · Phil Sutter
It is not entirely clear what the fixed commit was trying to establish, but the save output is certainly not correct (especially since print callback gets things right).
Fixes fc9237da4e845 ("Fix '-p icmp -m icmp' issue (Closes: #37)")"""(
libipt_icmp.c):
* Up to kernel <=2.4.20 the problem was:
* '-p icmp ' matches all icmp packets
* '-p icmp -m icmp' matches _only_ ICMP type 0 :(
* This is now fixed by initializing the field * to icmp type0xFF
"""But also:
v1.2.7a-35-gfc9237da missed touching *libip6t_icmp6.c*, so it was never updated with the same "bug".
Quoted 7 lines
In icmp6, --icmpv6-type was (and still is to this date) mandatory, which means
-p icmp6 -m icmp6would *not* implicitly go match ICMP(v6) type 0 like its IPv4 counterpart.Then, in v1.4.10-115-g1b8db4f4,
libipt_icmp.cmore or less accidentally gainedXTOPT_MAND(possible spill from IPv6 code), therefore-p icmp -m icmpwould also stop implicitly doing ICMP type "any".
Thanks for the forensics.
One could extend icmp6 match (in kernel and user space) to support this "any" type, though it seems not guaranteed the value 255 won't be used for a real message at some point. So a proper solution was to support type ranges like ebtables does. Then "any" type is 0:255/0:255.
Apart from the above, the three patches of this series should be fine, right?
Thanks, Phil
Quoted 8 lines · Phil Sutter
Quoted 7 lines
Quoted 4 lines
It is not entirely clear what the fixed commit was trying to establish, but the save output is certainly not correct (especially since print callback gets things right).
v1.2.7a-35-gfc9237da missed touching *libip6t_icmp6.c*, so it was never updated with the same "bug".[...]
Quoted 7 lines
One could extend icmp6 match (in kernel and user space) to support this "any" type, though it seems not guaranteed the value 255 won't be used for a real message at some point. So a proper solution was to support type ranges like ebtables does. Then "any" type is 0:255/0:255.
Apart from the above, the three patches of this series should be fine, right?
Yeah.
Phil Sutter
reviewerQuoted 15 lines · Jan Engelhardt
Quoted 13 lines · Phil Sutter
Quoted 7 lines
Quoted 4 lines
It is not entirely clear what the fixed commit was trying to establish, but the save output is certainly not correct (especially since print callback gets things right).
v1.2.7a-35-gfc9237da missed touching *libip6t_icmp6.c*, so it was never updated with the same "bug".[...]
One could extend icmp6 match (in kernel and user space) to support this "any" type, though it seems not guaranteed the value 255 won't be used for a real message at some point. So a proper solution was to support type ranges like ebtables does. Then "any" type is 0:255/0:255.
Quoted 4 lines
Quoted 2 lines
Apart from the above, the three patches of this series should be fine, right?
Yeah.
I have applied the series apart from patch 2: The wrong XTOPT_MAND flag is present since v1.4.11, if anyone actually depends on the behaviour, they would have complained. So leaving things as they are is fine, and instead one should go into another direction:
- Drop XTOPT_MAND and instead provide a better error message in x6_fcheck callback, pointing out that '-p icmp -m icmp' is equivalent to plain '-p icmp'.
- Same for '--icmp-type any'? In theory, it's pointless.
A nicer option would be to turn '-m icmp [--icmp-type any]' into a NOP. Using '-p icmp' is mandatory anyway. There's no support for matches to remove themselves, though. I guess this could be done by extending xtables_option_mfcall().
Cheers, Phil