Skip to contentSkip to conversation

Input: tca6416-keypad - always expect proper IRQ number in i2c client

PATCH In review Dmitry Torokhov 2 participants 7 messages Jul 24, 2023 – Jul 25, 2023

Subsystems (2)
lore
Share & tools
lore

Dmitry Torokhov

author maintainer
#0 lore raw

PATCH 1/5 Input: tca6416-keypad - always expect proper IRQ number in i2c client

Remove option having i2c client contain raw gpio number instead of proper IRQ number. There are no users of this facility in mainline and it will allow cleaning up the driver code with regard to wakeup handling, etc.

---
 drivers/input/keyboard/tca6416-keypad.c | 27 +++++++++----------------
 include/linux/tca6416_keypad.h          |  1 -
 2 files changed, 10 insertions(+), 18 deletions(-)
drivers/input/keyboard/tca6416-keypad.c +10 -17
index 2f745cabf4f2..01bc0b881188 100644
@@ -148,7 +148,7 @@ static int tca6416_keys_open(struct input_dev *dev)
 	if (chip->use_polling)
 		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
 	else
-		enable_irq(chip->irqnum);
+		enable_irq(chip->client->irq);
 
 	return 0;
 }
@@ -160,7 +160,7 @@ static void tca6416_keys_close(struct input_dev *dev)
 	if (chip->use_polling)
 		cancel_delayed_work_sync(&chip->dwork);
 	else
-		disable_irq(chip->irqnum);
+		disable_irq(chip->client->irq);
 }
 
 static int tca6416_setup_registers(struct tca6416_keypad_chip *chip)
@@ -266,12 +266,7 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 		goto fail1;
 
 	if (!chip->use_polling) {
-		if (pdata->irq_is_gpio)
-			chip->irqnum = gpio_to_irq(client->irq);
-		else
-			chip->irqnum = client->irq;
-
-		error = request_threaded_irq(chip->irqnum, NULL,
+		error = request_threaded_irq(client->irq, NULL,
 					     tca6416_keys_isr,
 					     IRQF_TRIGGER_FALLING |
 					     IRQF_ONESHOT | IRQF_NO_AUTOEN,
@@ -279,7 +274,7 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 		if (error) {
 			dev_dbg(&client->dev,
 				"Unable to claim irq %d; error %d\n",
-				chip->irqnum, error);
+				client->irq, error);
 			goto fail1;
 		}
 	}
@@ -298,8 +293,8 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 
 fail2:
 	if (!chip->use_polling) {
-		free_irq(chip->irqnum, chip);
-		enable_irq(chip->irqnum);
+		free_irq(client->irq, chip);
+		enable_irq(client->irq);
 	}
 fail1:
 	input_free_device(input);
@@ -312,8 +307,8 @@ static void tca6416_keypad_remove(struct i2c_client *client)
 	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
 
 	if (!chip->use_polling) {
-		free_irq(chip->irqnum, chip);
-		enable_irq(chip->irqnum);
+		free_irq(client->irq, chip);
+		enable_irq(client->irq);
 	}
 
 	input_unregister_device(chip->input);
@@ -323,10 +318,9 @@ static void tca6416_keypad_remove(struct i2c_client *client)
 static int tca6416_keypad_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev))
-		enable_irq_wake(chip->irqnum);
+		enable_irq_wake(client->irq);
 
 	return 0;
 }
@@ -334,10 +328,9 @@ static int tca6416_keypad_suspend(struct device *dev)
 static int tca6416_keypad_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev))
-		disable_irq_wake(chip->irqnum);
+		disable_irq_wake(client->irq);
 
 	return 0;
 }
include/linux/tca6416_keypad.h +0 -1
index b0d36a9934cc..5cf6f6f82aa7 100644
@@ -25,7 +25,6 @@ struct tca6416_keys_platform_data {
 	unsigned int rep:1;	/* enable input subsystem auto repeat */
 	uint16_t pinmask;
 	uint16_t invert;
-	int irq_is_gpio;
 	int use_polling;	/* use polling if Interrupt is not connected*/
 };
 #endif
Signature · 1 line
2.41.0.487.g6d72f3e995-goog
author maintainer
#1 lore raw

PATCH 2/5 Input: tca6416-keypad - rely on I2C core to set up suspend/resume

tca6416_keypad_suspend() and tca6416_keypad_resume() only configure device IRQ for wakeup. I2C core already does this by registering interrupt as a wakeup IRQ in case when device is marked as wakeup-enabled, so we can simply remove this code from the driver.

---
 drivers/input/keyboard/tca6416-keypad.c | 25 -------------------------
 1 file changed, 25 deletions(-)
drivers/input/keyboard/tca6416-keypad.c +0 -25
index 01bc0b881188..906dffbf171c 100644
@@ -287,7 +287,6 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 	}
 
 	i2c_set_clientdata(client, chip);
-	device_init_wakeup(&client->dev, 1);
 
 	return 0;
 
@@ -315,33 +314,9 @@ static void tca6416_keypad_remove(struct i2c_client *client)
 	kfree(chip);
 }
 
-static int tca6416_keypad_suspend(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-
-	if (device_may_wakeup(dev))
-		enable_irq_wake(client->irq);
-
-	return 0;
-}
-
-static int tca6416_keypad_resume(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-
-	if (device_may_wakeup(dev))
-		disable_irq_wake(client->irq);
-
-	return 0;
-}
-
-static DEFINE_SIMPLE_DEV_PM_OPS(tca6416_keypad_dev_pm_ops,
-				tca6416_keypad_suspend, tca6416_keypad_resume);
-
 static struct i2c_driver tca6416_keypad_driver = {
 	.driver = {
 		.name	= "tca6416-keypad",
-		.pm	= pm_sleep_ptr(&tca6416_keypad_dev_pm_ops),
 	},
 	.probe		= tca6416_keypad_probe,
 	.remove		= tca6416_keypad_remove,
Signature · 1 line
2.41.0.487.g6d72f3e995-goog
author maintainer
#2 lore raw

PATCH 3/5 Input: tca6416-keypad - fix interrupt enable disbalance

In reply to Dmitry Torokhov

The driver has been switched to use IRQF_NO_AUTOEN, but in the error unwinding and remove paths calls to enable_irq() were left in place, which will lead to an incorrect enable counter value.

Fixes bcd9730a04a1 ("Input: move to use request_irq by IRQF_NO_AUTOEN flag")
---
 drivers/input/keyboard/tca6416-keypad.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/input/keyboard/tca6416-keypad.c +2 -6
index 906dffbf171c..21a2f2de4345 100644
@@ -291,10 +291,8 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 	return 0;
 
 fail2:
-	if (!chip->use_polling) {
+	if (!chip->use_polling)
 		free_irq(client->irq, chip);
-		enable_irq(client->irq);
-	}
 fail1:
 	input_free_device(input);
 	kfree(chip);
@@ -305,10 +303,8 @@ static void tca6416_keypad_remove(struct i2c_client *client)
 {
 	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
 
-	if (!chip->use_polling) {
+	if (!chip->use_polling)
 		free_irq(client->irq, chip);
-		enable_irq(client->irq);
-	}
 
 	input_unregister_device(chip->input);
 	kfree(chip);
Signature · 1 line
2.41.0.487.g6d72f3e995-goog
author maintainer
#3 lore raw

PATCH 4/5 Input: tca6416-keypad - convert to use devm_* api

In reply to Dmitry Torokhov

From: Yangtao Li <[email protected]>

Use devm_* api to simplify code, this makes it unnecessary to explicitly release resources.

---
 drivers/input/keyboard/tca6416-keypad.c | 53 +++++++++----------------
 1 file changed, 18 insertions(+), 35 deletions(-)
drivers/input/keyboard/tca6416-keypad.c +18 -35
index 21a2f2de4345..ff665319791e 100644
@@ -216,12 +216,15 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 		return -EINVAL;
 	}
 
-	chip = kzalloc(struct_size(chip, buttons, pdata->nbuttons), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!chip || !input) {
-		error = -ENOMEM;
-		goto fail1;
-	}
+	chip = devm_kzalloc(&client->dev,
+			    struct_size(chip, buttons, pdata->nbuttons),
+			    GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&client->dev);
+	if (!input)
+		return -ENOMEM;
 
 	chip->client = client;
 	chip->input = input;
@@ -233,7 +236,6 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 
 	input->phys = "tca6416-keys/input0";
 	input->name = client->name;
-	input->dev.parent = &client->dev;
 
 	input->open = tca6416_keys_open;
 	input->close = tca6416_keys_close;
@@ -263,19 +265,20 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 	 */
 	error = tca6416_setup_registers(chip);
 	if (error)
-		goto fail1;
+		return error;
 
 	if (!chip->use_polling) {
-		error = request_threaded_irq(client->irq, NULL,
-					     tca6416_keys_isr,
-					     IRQF_TRIGGER_FALLING |
-					     IRQF_ONESHOT | IRQF_NO_AUTOEN,
-					     "tca6416-keypad", chip);
+		error = devm_request_threaded_irq(&client->dev, client->irq,
+						  NULL, tca6416_keys_isr,
+						  IRQF_TRIGGER_FALLING |
+							IRQF_ONESHOT |
+							IRQF_NO_AUTOEN,
+						  "tca6416-keypad", chip);
 		if (error) {
 			dev_dbg(&client->dev,
 				"Unable to claim irq %d; error %d\n",
 				client->irq, error);
-			goto fail1;
+			return error;
 		}
 	}
 
@@ -283,31 +286,12 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 	if (error) {
 		dev_dbg(&client->dev,
 			"Unable to register input device, error: %d\n", error);
-		goto fail2;
+		return error;
 	}
 
 	i2c_set_clientdata(client, chip);
 
 	return 0;
-
-fail2:
-	if (!chip->use_polling)
-		free_irq(client->irq, chip);
-fail1:
-	input_free_device(input);
-	kfree(chip);
-	return error;
-}
-
-static void tca6416_keypad_remove(struct i2c_client *client)
-{
-	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
-
-	if (!chip->use_polling)
-		free_irq(client->irq, chip);
-
-	input_unregister_device(chip->input);
-	kfree(chip);
 }
 
 static struct i2c_driver tca6416_keypad_driver = {
@@ -315,7 +299,6 @@ static struct i2c_driver tca6416_keypad_driver = {
 		.name	= "tca6416-keypad",
 	},
 	.probe		= tca6416_keypad_probe,
-	.remove		= tca6416_keypad_remove,
 	.id_table	= tca6416_id,
 };
 
Signature · 1 line
2.41.0.487.g6d72f3e995-goog
author maintainer
#4 lore raw

PATCH 5/5 Input: tca6416-keypad - switch to using input core's polling features

In reply to Dmitry Torokhov

Instead of rolling custom polling implementation use input core facilities.

---
 drivers/input/keyboard/tca6416-keypad.c | 46 ++++++++++---------------
 1 file changed, 19 insertions(+), 27 deletions(-)
drivers/input/keyboard/tca6416-keypad.c +19 -27
index ff665319791e..ebc8b9561266 100644
@@ -24,6 +24,8 @@
 #define TCA6416_INVERT         2
 #define TCA6416_DIRECTION      3
 
+#define TCA6416_POLL_INTERVAL	100 /* msec */
+
 static const struct i2c_device_id tca6416_id[] = {
 	{ "tca6416-keys", 16, },
 	{ "tca6408-keys", 8, },
@@ -43,7 +45,6 @@ struct tca6416_keypad_chip {
 
 	struct i2c_client *client;
 	struct input_dev *input;
-	struct delayed_work dwork;
 	int io_size;
 	int irqnum;
 	u16 pinmask;
@@ -85,9 +86,9 @@ static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val)
 	return 0;
 }
 
-static void tca6416_keys_scan(struct tca6416_keypad_chip *chip)
+static void tca6416_keys_scan(struct input_dev *input)
 {
-	struct input_dev *input = chip->input;
+	struct tca6416_keypad_chip *chip = input_get_drvdata(input);
 	u16 reg_val, val;
 	int error, i, pin_index;
 
@@ -122,33 +123,20 @@ static void tca6416_keys_scan(struct tca6416_keypad_chip *chip)
  */
 static irqreturn_t tca6416_keys_isr(int irq, void *dev_id)
 {
-	struct tca6416_keypad_chip *chip = dev_id;
-
-	tca6416_keys_scan(chip);
+	tca6416_keys_scan(dev_id);
 
 	return IRQ_HANDLED;
 }
 
-static void tca6416_keys_work_func(struct work_struct *work)
-{
-	struct tca6416_keypad_chip *chip =
-		container_of(work, struct tca6416_keypad_chip, dwork.work);
-
-	tca6416_keys_scan(chip);
-	schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
-}
-
 static int tca6416_keys_open(struct input_dev *dev)
 {
 	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
 
-	/* Get initial device state in case it has switches */
-	tca6416_keys_scan(chip);
-
-	if (chip->use_polling)
-		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
-	else
+	if (!chip->use_polling) {
+		/* Get initial device state in case it has switches */
+		tca6416_keys_scan(dev);
 		enable_irq(chip->client->irq);
+	}
 
 	return 0;
 }
@@ -157,9 +145,7 @@ static void tca6416_keys_close(struct input_dev *dev)
 {
 	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
 
-	if (chip->use_polling)
-		cancel_delayed_work_sync(&chip->dwork);
-	else
+	if (!chip->use_polling)
 		disable_irq(chip->client->irq);
 }
 
@@ -232,8 +218,6 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 	chip->pinmask = pdata->pinmask;
 	chip->use_polling = pdata->use_polling;
 
-	INIT_DELAYED_WORK(&chip->dwork, tca6416_keys_work_func);
-
 	input->phys = "tca6416-keys/input0";
 	input->name = client->name;
 
@@ -268,12 +252,20 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 		return error;
 
 	if (!chip->use_polling) {
+		error = input_setup_polling(input, tca6416_keys_scan);
+		if (error) {
+			dev_err(&client->dev, "Failed to setup polling\n");
+			return error;
+		}
+
+		input_set_poll_interval(input, TCA6416_POLL_INTERVAL);
+	} else {
 		error = devm_request_threaded_irq(&client->dev, client->irq,
 						  NULL, tca6416_keys_isr,
 						  IRQF_TRIGGER_FALLING |
 							IRQF_ONESHOT |
 							IRQF_NO_AUTOEN,
-						  "tca6416-keypad", chip);
+						  "tca6416-keypad", input);
 		if (error) {
 			dev_dbg(&client->dev,
 				"Unable to claim irq %d; error %d\n",
Signature · 1 line
2.41.0.487.g6d72f3e995-goog
#5 lore raw

Re: [PATCH 5/5] Input: tca6416-keypad - switch to using input core's polling features

Hi

Just one question below.

Quoted 101 lines · Dmitry Torokhov

Instead of rolling custom polling implementation use input core facilities.

---
 drivers/input/keyboard/tca6416-keypad.c | 46 ++++++++++---------------
 1 file changed, 19 insertions(+), 27 deletions(-)
drivers/input/keyboard/tca6416-keypad.c +10 -26
index ff665319791e..ebc8b9561266 100644
@@ -24,6 +24,8 @@
 #define TCA6416_INVERT         2
 #define TCA6416_DIRECTION      3
 
+#define TCA6416_POLL_INTERVAL	100 /* msec */
+
 static const struct i2c_device_id tca6416_id[] = {
 	{ "tca6416-keys", 16, },
 	{ "tca6408-keys", 8, },
@@ -43,7 +45,6 @@ struct tca6416_keypad_chip {
 
 	struct i2c_client *client;
 	struct input_dev *input;
-	struct delayed_work dwork;
 	int io_size;
 	int irqnum;
 	u16 pinmask;
@@ -85,9 +86,9 @@ static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val)
 	return 0;
 }
 
-static void tca6416_keys_scan(struct tca6416_keypad_chip *chip)
+static void tca6416_keys_scan(struct input_dev *input)
 {
-	struct input_dev *input = chip->input;
+	struct tca6416_keypad_chip *chip = input_get_drvdata(input);
 	u16 reg_val, val;
 	int error, i, pin_index;
 
@@ -122,33 +123,20 @@ static void tca6416_keys_scan(struct tca6416_keypad_chip *chip)
  */
 static irqreturn_t tca6416_keys_isr(int irq, void *dev_id)
 {
-	struct tca6416_keypad_chip *chip = dev_id;
-
-	tca6416_keys_scan(chip);
+	tca6416_keys_scan(dev_id);
 
 	return IRQ_HANDLED;
 }
 
-static void tca6416_keys_work_func(struct work_struct *work)
-{
-	struct tca6416_keypad_chip *chip =
-		container_of(work, struct tca6416_keypad_chip, dwork.work);
-
-	tca6416_keys_scan(chip);
-	schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
-}
-
 static int tca6416_keys_open(struct input_dev *dev)
 {
 	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
 
-	/* Get initial device state in case it has switches */
-	tca6416_keys_scan(chip);
-
-	if (chip->use_polling)
-		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
-	else
+	if (!chip->use_polling) {
+		/* Get initial device state in case it has switches */
+		tca6416_keys_scan(dev);
 		enable_irq(chip->client->irq);
+	}
 
 	return 0;
 }
@@ -157,9 +145,7 @@ static void tca6416_keys_close(struct input_dev *dev)
 {
 	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
 
-	if (chip->use_polling)
-		cancel_delayed_work_sync(&chip->dwork);
-	else
+	if (!chip->use_polling)
 		disable_irq(chip->client->irq);
 }
 
@@ -232,8 +218,6 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 	chip->pinmask = pdata->pinmask;
 	chip->use_polling = pdata->use_polling;
 
-	INIT_DELAYED_WORK(&chip->dwork, tca6416_keys_work_func);
-
 	input->phys = "tca6416-keys/input0";
 	input->name = client->name;
 

drivers/input/keyboard/tca6416-keypad.c static int tca6416_keypad_probe(struct i2c_client *client) · line 254

Quoted 3 lines
drivers/input/keyboard/tca6416-keypad.c +0 -0
@@ -268,12 +252,20 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 		return error;
 
 	if (!chip->use_polling) {

Sorry for my ignorant question but it seems counterituitive that we set up polling when chip->use_polling is false. Is this intended?

Cheers,
Silvan

Quoted 18 lines
drivers/input/keyboard/tca6416-keypad.c +9 -1
+		error = input_setup_polling(input, tca6416_keys_scan);
+		if (error) {
+			dev_err(&client->dev, "Failed to setup polling\n");
+			return error;
+		}
+
+		input_set_poll_interval(input, TCA6416_POLL_INTERVAL);
+	} else {
 		error = devm_request_threaded_irq(&client->dev, client->irq,
 						  NULL, tca6416_keys_isr,
 						  IRQF_TRIGGER_FALLING |
 							IRQF_ONESHOT |
 							IRQF_NO_AUTOEN,
-						  "tca6416-keypad", chip);
+						  "tca6416-keypad", input);
 		if (error) {
 			dev_dbg(&client->dev,
 				"Unable to claim irq %d; error %d\n",
author maintainer
#6 lore raw

Re: [PATCH 5/5] Input: tca6416-keypad - switch to using input core's polling features

Quoted 105 lines · Silvan Jegen

Hi

Just one question below.

Quoted 100 lines · Dmitry Torokhov

Instead of rolling custom polling implementation use input core facilities.

---
 drivers/input/keyboard/tca6416-keypad.c | 46 ++++++++++---------------
 1 file changed, 19 insertions(+), 27 deletions(-)
drivers/input/keyboard/tca6416-keypad.c +10 -26
index ff665319791e..ebc8b9561266 100644
@@ -24,6 +24,8 @@
 #define TCA6416_INVERT         2
 #define TCA6416_DIRECTION      3
 
+#define TCA6416_POLL_INTERVAL	100 /* msec */
+
 static const struct i2c_device_id tca6416_id[] = {
 	{ "tca6416-keys", 16, },
 	{ "tca6408-keys", 8, },
@@ -43,7 +45,6 @@ struct tca6416_keypad_chip {
 
 	struct i2c_client *client;
 	struct input_dev *input;
-	struct delayed_work dwork;
 	int io_size;
 	int irqnum;
 	u16 pinmask;
@@ -85,9 +86,9 @@ static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val)
 	return 0;
 }
 
-static void tca6416_keys_scan(struct tca6416_keypad_chip *chip)
+static void tca6416_keys_scan(struct input_dev *input)
 {
-	struct input_dev *input = chip->input;
+	struct tca6416_keypad_chip *chip = input_get_drvdata(input);
 	u16 reg_val, val;
 	int error, i, pin_index;
 
@@ -122,33 +123,20 @@ static void tca6416_keys_scan(struct tca6416_keypad_chip *chip)
  */
 static irqreturn_t tca6416_keys_isr(int irq, void *dev_id)
 {
-	struct tca6416_keypad_chip *chip = dev_id;
-
-	tca6416_keys_scan(chip);
+	tca6416_keys_scan(dev_id);
 
 	return IRQ_HANDLED;
 }
 
-static void tca6416_keys_work_func(struct work_struct *work)
-{
-	struct tca6416_keypad_chip *chip =
-		container_of(work, struct tca6416_keypad_chip, dwork.work);
-
-	tca6416_keys_scan(chip);
-	schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
-}
-
 static int tca6416_keys_open(struct input_dev *dev)
 {
 	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
 
-	/* Get initial device state in case it has switches */
-	tca6416_keys_scan(chip);
-
-	if (chip->use_polling)
-		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
-	else
+	if (!chip->use_polling) {
+		/* Get initial device state in case it has switches */
+		tca6416_keys_scan(dev);
 		enable_irq(chip->client->irq);
+	}
 
 	return 0;
 }
@@ -157,9 +145,7 @@ static void tca6416_keys_close(struct input_dev *dev)
 {
 	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
 
-	if (chip->use_polling)
-		cancel_delayed_work_sync(&chip->dwork);
-	else
+	if (!chip->use_polling)
 		disable_irq(chip->client->irq);
 }
 
@@ -232,8 +218,6 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 	chip->pinmask = pdata->pinmask;
 	chip->use_polling = pdata->use_polling;
 
-	INIT_DELAYED_WORK(&chip->dwork, tca6416_keys_work_func);
-
 	input->phys = "tca6416-keys/input0";
 	input->name = client->name;
 
Quoted 7 lines

drivers/input/keyboard/tca6416-keypad.c static int tca6416_keypad_probe(struct i2c_client *client) · line 254

Quoted 4 lines
drivers/input/keyboard/tca6416-keypad.c +0 -0
@@ -268,12 +252,20 @@ static int tca6416_keypad_probe(struct i2c_client *client)
 		return error;
 
 	if (!chip->use_polling) {

Sorry for my ignorant question but it seems counterituitive that we set up polling when chip->use_polling is false. Is this intended?

Nope, this is my brain fart. Thanks for noticing! I'll fix up the condition before committing...

Thanks.

Signature · 1 line
Dmitry