Skip to contentSkip to conversation

octeontx2-af: Tc flower offload support for inner VLAN

PATCH In review Suman Ghosh 2 participants 3 messages Jul 27, 2023 – Jul 29, 2023

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 octeontx2-af: Tc flower offload support for inner VLAN

This patch extends current TC flower offload support to allow filters involving inner VLAN matching, to be offloaded to HW.

Example command:
tc filter add dev eth2 protocol 802.1AD parent ffff: flower vlan_id 10 vlan_ethtype 802.1Q cvlan_id 20 skip_sw action drop

---
v2 changes:
- Addressed review comment from Leon for a minor code readjustment

 .../net/ethernet/marvell/octeontx2/af/mbox.h  |   1 +
 .../net/ethernet/marvell/octeontx2/af/npc.h   |   3 +
 .../marvell/octeontx2/af/rvu_debugfs.c        |   5 +
 .../marvell/octeontx2/af/rvu_npc_fs.c         |  13 +++
 .../ethernet/marvell/octeontx2/nic/otx2_tc.c  | 107 +++++++++++-------
 5 files changed, 91 insertions(+), 38 deletions(-)
drivers/net/ethernet/marvell/octeontx2/af/mbox.h +1 -0
index ed66c5989102..382764f39702 100644
@@ -1461,6 +1461,7 @@ struct flow_msg {
 		u8 ip_flag;
 		u8 next_header;
 	};
+	__be16 vlan_itci;
 };
 
 struct npc_install_flow_req {
drivers/net/ethernet/marvell/octeontx2/af/npc.h +3 -0
index 9beeead56d7b..5b6a1b941ccc 100644
@@ -184,6 +184,7 @@ enum key_fields {
 	NPC_VLAN_ETYPE_CTAG, /* 0x8100 */
 	NPC_VLAN_ETYPE_STAG, /* 0x88A8 */
 	NPC_OUTER_VID,
+	NPC_INNER_VID,
 	NPC_TOS,
 	NPC_IPFRAG_IPV4,
 	NPC_SIP_IPV4,
@@ -229,6 +230,8 @@ enum key_fields {
 	NPC_VLAN_TAG1,
 	/* outer vlan tci for double tagged frame */
 	NPC_VLAN_TAG2,
+	/* inner vlan tci for double tagged frame */
+	NPC_VLAN_TAG3,
 	/* other header fields programmed to extract but not of our interest */
 	NPC_UNKNOWN,
 	NPC_KEY_FIELDS_MAX,
drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c +5 -0
index 3b26893efdf8..3d0825c0685a 100644
@@ -2787,6 +2787,11 @@ static void rvu_dbg_npc_mcam_show_flows(struct seq_file *s,
 			seq_printf(s, "mask 0x%x\n",
 				   ntohs(rule->mask.vlan_tci));
 			break;
+		case NPC_INNER_VID:
+			seq_printf(s, "0x%x ", ntohs(rule->packet.vlan_itci));
+			seq_printf(s, "mask 0x%x\n",
+				   ntohs(rule->mask.vlan_itci));
+			break;
 		case NPC_TOS:
 			seq_printf(s, "%d ", rule->packet.tos);
 			seq_printf(s, "mask 0x%x\n", rule->mask.tos);
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c +13 -0
index 9c365cc3e736..f2a7599aa9de 100644
@@ -20,6 +20,7 @@ static const char * const npc_flow_names[] = {
 	[NPC_VLAN_ETYPE_CTAG] = "vlan ether type ctag",
 	[NPC_VLAN_ETYPE_STAG] = "vlan ether type stag",
 	[NPC_OUTER_VID]	= "outer vlan id",
+	[NPC_INNER_VID]	= "inner vlan id",
 	[NPC_TOS]	= "tos",
 	[NPC_IPFRAG_IPV4] = "fragmented IPv4 header ",
 	[NPC_SIP_IPV4]	= "ipv4 source ip",
@@ -327,6 +328,8 @@ static void npc_handle_multi_layer_fields(struct rvu *rvu, int blkaddr, u8 intf)
 	 */
 	struct npc_key_field *vlan_tag1;
 	struct npc_key_field *vlan_tag2;
+	/* Inner VLAN TCI for double tagged frames */
+	struct npc_key_field *vlan_tag3;
 	u64 *features;
 	u8 start_lid;
 	int i;
@@ -349,6 +352,7 @@ static void npc_handle_multi_layer_fields(struct rvu *rvu, int blkaddr, u8 intf)
 	etype_tag2 = &key_fields[NPC_ETYPE_TAG2];
 	vlan_tag1 = &key_fields[NPC_VLAN_TAG1];
 	vlan_tag2 = &key_fields[NPC_VLAN_TAG2];
+	vlan_tag3 = &key_fields[NPC_VLAN_TAG3];
 
 	/* if key profile programmed does not extract Ethertype at all */
 	if (!etype_ether->nr_kws && !etype_tag1->nr_kws && !etype_tag2->nr_kws) {
@@ -430,6 +434,12 @@ static void npc_handle_multi_layer_fields(struct rvu *rvu, int blkaddr, u8 intf)
 		goto done;
 	}
 	*features |= BIT_ULL(NPC_OUTER_VID);
+
+	/* If key profile extracts inner vlan tci */
+	if (vlan_tag3->nr_kws) {
+		key_fields[NPC_INNER_VID] = *vlan_tag3;
+		*features |= BIT_ULL(NPC_INNER_VID);
+	}
 done:
 	return;
 }
@@ -512,6 +522,7 @@ do {									       \
 	NPC_SCAN_HDR(NPC_ETYPE_TAG2, NPC_LID_LB, NPC_LT_LB_STAG_QINQ, 8, 2);
 	NPC_SCAN_HDR(NPC_VLAN_TAG1, NPC_LID_LB, NPC_LT_LB_CTAG, 2, 2);
 	NPC_SCAN_HDR(NPC_VLAN_TAG2, NPC_LID_LB, NPC_LT_LB_STAG_QINQ, 2, 2);
+	NPC_SCAN_HDR(NPC_VLAN_TAG3, NPC_LID_LB, NPC_LT_LB_STAG_QINQ, 6, 2);
 	NPC_SCAN_HDR(NPC_DMAC, NPC_LID_LA, la_ltype, la_start, 6);
 	/* SMAC follows the DMAC(which is 6 bytes) */
 	NPC_SCAN_HDR(NPC_SMAC, NPC_LID_LA, la_ltype, la_start + 6, 6);
@@ -932,6 +943,8 @@ do {									      \
 
 	NPC_WRITE_FLOW(NPC_OUTER_VID, vlan_tci, ntohs(pkt->vlan_tci), 0,
 		       ntohs(mask->vlan_tci), 0);
+	NPC_WRITE_FLOW(NPC_INNER_VID, vlan_itci, ntohs(pkt->vlan_itci), 0,
+		       ntohs(mask->vlan_itci), 0);
 
 	NPC_WRITE_FLOW(NPC_IPFRAG_IPV6, next_header, pkt->next_header, 0,
 		       mask->next_header, 0);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +69 -38

128 lines not on this page · raw message

Signature · 1 line
2.25.1
#1 lore raw

On Thu, Jul 27, 2023 at 10:42:52AM +0530, Suman Ghosh wrote:

...

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c static int otx2_tc_parse_actions(struct otx2_nic *nic, · line 445

Quoted 12 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +4 -0
index 1e6fc23eca4f..89836cd299e4 100644
@@ -439,6 +439,64 @@ static int otx2_tc_parse_actions(struct otx2_nic *nic,
 	return 0;
 }
 
+static int otx2_tc_process_vlan(struct otx2_nic *nic, struct flow_msg *flow_spec,
+				struct flow_msg *flow_mask, struct flow_rule *rule,
+				struct npc_install_flow_req *req, bool is_inner)
+{

Hi Suman,

Most of the code in this function seems to be moved from elsewhere. It might make it slightly easier to review if there was a patch that moved that code, then another patch that modified to support the inner VLAN feature.

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c static int otx2_tc_parse_actions(struct otx2_nic *nic, · line 455

Quoted 10 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +10 -0
+	struct flow_match_vlan match;
+	u16 vlan_tci, vlan_tci_mask;
+
+	if (is_inner)
+		flow_rule_match_cvlan(rule, &match);
+	else
+		flow_rule_match_vlan(rule, &match);
+
+	if ((ntohs(match.key->vlan_tpid) != ETH_P_8021Q) &&
+	    (ntohs(match.key->vlan_tpid) != ETH_P_8021AD)) {

I think eth_type_vlan() can be used here.

Quoted 117 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +55 -38
+		netdev_err(nic->netdev, "vlan tpid 0x%x not supported\n",
+			   ntohs(match.key->vlan_tpid));
+		return -EOPNOTSUPP;
+	}
+
+	if (!match.mask->vlan_id) {
+		struct flow_action_entry *act;
+		int i;
+
+		flow_action_for_each(i, act, &rule->action) {
+			if (act->id == FLOW_ACTION_DROP) {
+				netdev_err(nic->netdev,
+					   "vlan tpid 0x%x with vlan_id %d is not supported for DROP rule.\n",
+					   ntohs(match.key->vlan_tpid), match.key->vlan_id);
+				return -EOPNOTSUPP;
+			}
+		}
+	}
+
+	if (match.mask->vlan_id ||
+	    match.mask->vlan_dei ||
+	    match.mask->vlan_priority) {
+		vlan_tci = match.key->vlan_id |
+			   match.key->vlan_dei << 12 |
+			   match.key->vlan_priority << 13;
+
+		vlan_tci_mask = match.mask->vlan_id |
+				match.mask->vlan_dei << 12 |
+				match.mask->vlan_priority << 13;
+
+		if (is_inner) {
+			flow_spec->vlan_itci = htons(vlan_tci);
+			flow_mask->vlan_itci = htons(vlan_tci_mask);
+			req->features |= BIT_ULL(NPC_INNER_VID);
+		} else {
+			flow_spec->vlan_tci = htons(vlan_tci);
+			flow_mask->vlan_tci = htons(vlan_tci_mask);
+			req->features |= BIT_ULL(NPC_OUTER_VID);
+		}
+	}
+
+	return 0;
+}
+
 static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,
 				struct flow_cls_offload *f,
 				struct npc_install_flow_req *req)
@@ -458,6 +516,7 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,
 	      BIT(FLOW_DISSECTOR_KEY_BASIC) |
 	      BIT(FLOW_DISSECTOR_KEY_ETH_ADDRS) |
 	      BIT(FLOW_DISSECTOR_KEY_VLAN) |
+	      BIT(FLOW_DISSECTOR_KEY_CVLAN) |
 	      BIT(FLOW_DISSECTOR_KEY_IPV4_ADDRS) |
 	      BIT(FLOW_DISSECTOR_KEY_IPV6_ADDRS) |
 	      BIT(FLOW_DISSECTOR_KEY_PORTS) |
@@ -564,47 +623,19 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,
 	}
 
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_VLAN)) {
-		struct flow_match_vlan match;
-		u16 vlan_tci, vlan_tci_mask;
-
-		flow_rule_match_vlan(rule, &match);
-
-		if (ntohs(match.key->vlan_tpid) != ETH_P_8021Q) {
-			netdev_err(nic->netdev, "vlan tpid 0x%x not supported\n",
-				   ntohs(match.key->vlan_tpid));
-			return -EOPNOTSUPP;
-		}
+		int ret;
 
-		if (!match.mask->vlan_id) {
-			struct flow_action_entry *act;
-			int i;
-
-			flow_action_for_each(i, act, &rule->action) {
-				if (act->id == FLOW_ACTION_DROP) {
-					netdev_err(nic->netdev,
-						   "vlan tpid 0x%x with vlan_id %d is not supported for DROP rule.\n",
-						   ntohs(match.key->vlan_tpid),
-						   match.key->vlan_id);
-					return -EOPNOTSUPP;
-				}
-			}
-		}
-
-		if (match.mask->vlan_id ||
-		    match.mask->vlan_dei ||
-		    match.mask->vlan_priority) {
-			vlan_tci = match.key->vlan_id |
-				   match.key->vlan_dei << 12 |
-				   match.key->vlan_priority << 13;
+		ret = otx2_tc_process_vlan(nic, flow_spec, flow_mask, rule, req, false);
+		if (ret)
+			return ret;
+	}
 
-			vlan_tci_mask = match.mask->vlan_id |
-					match.mask->vlan_dei << 12 |
-					match.mask->vlan_priority << 13;
+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_CVLAN)) {
+		int ret;
 
-			flow_spec->vlan_tci = htons(vlan_tci);
-			flow_mask->vlan_tci = htons(vlan_tci_mask);
-			req->features |= BIT_ULL(NPC_OUTER_VID);
-		}
+		ret = otx2_tc_process_vlan(nic, flow_spec, flow_mask, rule, req, true);
+		if (ret)
+			return ret;
 	}
 
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV4_ADDRS)) {
Signature · 1 line
2.25.1
#2 lore raw
Quoted 9 lines
Quoted 3 lines

}

+static int otx2_tc_process_vlan(struct otx2_nic *nic, struct flow_msg

*flow_spec,

Review

Quoted 2 lines
(quoted diff) +2 -0
+				struct flow_msg *flow_mask, struct flow_rule *rule,
+				struct npc_install_flow_req *req, bool is_inner) {

Hi Suman,

Quoted 4 lines

Most of the code in this function seems to be moved from elsewhere. It might make it slightly easier to review if there was a patch that moved that code, then another patch that modified to support the inner VLAN feature.

[Suman] Okay Simon. I will push a patch set of 2 patches involving the suggested changes.

Quoted 13 lines

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c static int otx2_tc_parse_actions(struct otx2_nic *nic, · line 455

Quoted 11 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +10 -0
+	struct flow_match_vlan match;
+	u16 vlan_tci, vlan_tci_mask;
+
+	if (is_inner)
+		flow_rule_match_cvlan(rule, &match);
+	else
+		flow_rule_match_vlan(rule, &match);
+
+	if ((ntohs(match.key->vlan_tpid) != ETH_P_8021Q) &&
+	    (ntohs(match.key->vlan_tpid) != ETH_P_8021AD)) {

I think eth_type_vlan() can be used here.

[Suman] Ack.

Quoted 126 lines
Quoted 4 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +3 -0
+		netdev_err(nic->netdev, "vlan tpid 0x%x not supported\n",
+			   ntohs(match.key->vlan_tpid));
+		return -EOPNOTSUPP;

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c static int otx2_tc_parse_actions(struct otx2_nic *nic,

Quoted 10 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +10 -0
+	}
+
+	if (!match.mask->vlan_id) {
+		struct flow_action_entry *act;
+		int i;
+
+		flow_action_for_each(i, act, &rule->action) {
+			if (act->id == FLOW_ACTION_DROP) {
+				netdev_err(nic->netdev,
+					   "vlan tpid 0x%x with vlan_id %d is not

supported for DROP rule.\n",

Quoted 23 lines
(quoted diff) +1 -0
+					   ntohs(match.key->vlan_tpid), match.key-

vlan_id);

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +21 -0
+				return -EOPNOTSUPP;
+			}
+		}
+	}
+
+	if (match.mask->vlan_id ||
+	    match.mask->vlan_dei ||
+	    match.mask->vlan_priority) {
+		vlan_tci = match.key->vlan_id |
+			   match.key->vlan_dei << 12 |
+			   match.key->vlan_priority << 13;
+
+		vlan_tci_mask = match.mask->vlan_id |
+				match.mask->vlan_dei << 12 |
+				match.mask->vlan_priority << 13;
+
+		if (is_inner) {
+			flow_spec->vlan_itci = htons(vlan_tci);
+			flow_mask->vlan_itci = htons(vlan_tci_mask);
+			req->features |= BIT_ULL(NPC_INNER_VID);
+		} else {

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c static int otx2_tc_parse_actions(struct otx2_nic *nic,

Quoted 10 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +9 -0
+			flow_spec->vlan_tci = htons(vlan_tci);
+			flow_mask->vlan_tci = htons(vlan_tci_mask);
+			req->features |= BIT_ULL(NPC_OUTER_VID);
+		}
+	}
+
+	return 0;
+}
+
 static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct

otx2_tc_flow *node,

Review

Quoted 2 lines
(quoted diff) +0 -0
 				struct flow_cls_offload *f,
 				struct npc_install_flow_req *req) @@ -458,6 +516,7

@@ static int

Quoted 9 lines

otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +1 -0
 	      BIT(FLOW_DISSECTOR_KEY_BASIC) |
 	      BIT(FLOW_DISSECTOR_KEY_ETH_ADDRS) |
 	      BIT(FLOW_DISSECTOR_KEY_VLAN) |
+	      BIT(FLOW_DISSECTOR_KEY_CVLAN) |
 	      BIT(FLOW_DISSECTOR_KEY_IPV4_ADDRS) |
 	      BIT(FLOW_DISSECTOR_KEY_IPV6_ADDRS) |
 	      BIT(FLOW_DISSECTOR_KEY_PORTS) | @@ -564,47 +623,19 @@ static

int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow

*node,

Quoted 13 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +0 -10
 	}
 
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_VLAN)) {
-		struct flow_match_vlan match;
-		u16 vlan_tci, vlan_tci_mask;
-
-		flow_rule_match_vlan(rule, &match);
-
-		if (ntohs(match.key->vlan_tpid) != ETH_P_8021Q) {
-			netdev_err(nic->netdev, "vlan tpid 0x%x not supported\n",
-				   ntohs(match.key->vlan_tpid));
-			return -EOPNOTSUPP;
-		}

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,

Quoted 10 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +1 -8
+		int ret;
 
-		if (!match.mask->vlan_id) {
-			struct flow_action_entry *act;
-			int i;
-
-			flow_action_for_each(i, act, &rule->action) {
-				if (act->id == FLOW_ACTION_DROP) {
-					netdev_err(nic->netdev,
-						   "vlan tpid 0x%x with vlan_id %d is not

supported for DROP rule.\n",

Quoted 4 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +0 -4
-						   ntohs(match.key->vlan_tpid),
-						   match.key->vlan_id);
-					return -EOPNOTSUPP;
-				}

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,

Quoted 10 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +1 -9
-			}
-		}
-
-		if (match.mask->vlan_id ||
-		    match.mask->vlan_dei ||
-		    match.mask->vlan_priority) {
-			vlan_tci = match.key->vlan_id |
-				   match.key->vlan_dei << 12 |
-				   match.key->vlan_priority << 13;
+		ret = otx2_tc_process_vlan(nic, flow_spec, flow_mask, rule,

req, false);

Quoted 5 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +3 -1
+		if (ret)
+			return ret;
+	}
 
-			vlan_tci_mask = match.mask->vlan_id |

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,

Quoted 10 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +3 -6
-					match.mask->vlan_dei << 12 |
-					match.mask->vlan_priority << 13;
+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_CVLAN)) {
+		int ret;
 
-			flow_spec->vlan_tci = htons(vlan_tci);
-			flow_mask->vlan_tci = htons(vlan_tci_mask);
-			req->features |= BIT_ULL(NPC_OUTER_VID);
-		}
+		ret = otx2_tc_process_vlan(nic, flow_spec, flow_mask, rule,

req, true);

Quoted 9 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +2 -1
+		if (ret)
+			return ret;
 	}
 
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV4_ADDRS)) {
--

2.25.1