Skip to contentSkip to conversation

perf test case 6 dumps core on s390 without PMU

DISCUSSION Applied Thomas Richter 3 participants 4 messages Jul 28, 2023 – Aug 1, 2023

lore
Share & tools
lore
#0 lore raw

Using Linux 6.5.0rc3 perf test case 6 dumps core on an s390 without configured PMU (this can happen depending on customer machine configuration).

In this configuration several perf test cases fail:

 # ./perf test 2>&1 | grep FAIL
  6.1: Test event parsing                                : FAILED!
 10.3: Parsing of PMU event table metrics                : FAILED!
 10.4: Parsing of PMU event table metrics with fake PMUs : FAILED!
 28: Use a dummy software event to keep tracking         : FAILED!
 35: Track with sched_switch                             : FAILED!
 66: Parse and process metrics                           : FAILED!
 #

Even worse the test case 6 dumps core:

 # ./perf test -F 6
  6: Parse event definition strings                      :
  6.1: Test event parsing                                :
 Segmentation fault (core dumped)
 #

The root cause for these failures and core dump is a missing
PMU, as can be seen by the debug output:
...
Event test failure: test 57 'instructions:uep'
running test 58 '{cycles,cache-misses,branch-misses}:e'
No PMU found for 'cycles' <-- Here no PMU is found, because there is none!

   FAILED tests/parse-events.c:1516 wrong number of entries
   Event test failure: test 58 '{cycles,cache-misses,branch-misses}:e'

Here no PMU is found, because there is none!

....
running test 59 'cycles/name=name/'
No PMU found for 'name'
Segmentation fault (core dumped)

Here the root cause in in function test__term_equal_term() variable evsel->name is NULL:

 # gdb ./perf
....
Breakpoint 1, test__term_equal_term (evlist=0x1542c00) at\
                       tests/parse-events.c:1688
(gdb) p evsel->name
$3 = 0x3fff7fe3dc0 ""
(gdb) n
 691 TEST_ASSERT_VAL("wrong type", evsel->core.attr.type == PERF_TYPE_HARDWARE);
(gdb) n
1692 TEST_ASSERT_VAL("wrong config", test_config(evsel, PERF_COUNT_HW_CPU_CYCLES));
(gdb) n
1693 TEST_ASSERT_VAL("wrong name setting", strcmp(evsel->name, "name") == 0);
(gdb) n

Program received signal SIGSEGV, Segmentation fault.

I could fix this by checking for NULL pointer, but I have the feeling that there is more to it. However I do not fully understand the latest rework on the event handling.

The other test cases listed above fail due to the same root cause, no PMU found.

Please advise. What should all these test return when a system does not have any PMU defined at all?

Thanks a lot.

Signature · 5 lines
Thomas Richter, Dept 3303, IBM s390 Linux Development, Boeblingen, Germany
--
Vorsitzender des Aufsichtsrats: Gregor Pillen
Geschäftsführung: David Faller
Sitz der Gesellschaft: Böblingen / Registergericht: Amtsgericht Stuttgart, HRB 243294
#1 lore raw
Quoted 14 lines · Thomas Richter

Using Linux 6.5.0rc3 perf test case 6 dumps core on an s390 without configured PMU (this can happen depending on customer machine configuration).

In this configuration several perf test cases fail:

 # ./perf test 2>&1 | grep FAIL
  6.1: Test event parsing                                : FAILED!
 10.3: Parsing of PMU event table metrics                : FAILED!
 10.4: Parsing of PMU event table metrics with fake PMUs : FAILED!
 28: Use a dummy software event to keep tracking         : FAILED!
 35: Track with sched_switch                             : FAILED!
 66: Parse and process metrics                           : FAILED!
 #
Quoted 7 lines

Even worse the test case 6 dumps core:

 # ./perf test -F 6
  6: Parse event definition strings                      :
  6.1: Test event parsing                                :
 Segmentation fault (core dumped)
 #

Thanks for reporting this!

Quoted 38 lines

The root cause for these failures and core dump is a missing
PMU, as can be seen by the debug output:
...
Event test failure: test 57 'instructions:uep'
running test 58 '{cycles,cache-misses,branch-misses}:e'
No PMU found for 'cycles' <-- Here no PMU is found, because there is none!

   FAILED tests/parse-events.c:1516 wrong number of entries
   Event test failure: test 58 '{cycles,cache-misses,branch-misses}:e'

Here no PMU is found, because there is none!

....
running test 59 'cycles/name=name/'
No PMU found for 'name'
Segmentation fault (core dumped)

Here the root cause in in function test__term_equal_term() variable evsel->name is NULL:

 # gdb ./perf
....
Breakpoint 1, test__term_equal_term (evlist=0x1542c00) at\
                       tests/parse-events.c:1688
(gdb) p evsel->name
$3 = 0x3fff7fe3dc0 ""
(gdb) n
 691 TEST_ASSERT_VAL("wrong type", evsel->core.attr.type == PERF_TYPE_HARDWARE);
(gdb) n
1692 TEST_ASSERT_VAL("wrong config", test_config(evsel, PERF_COUNT_HW_CPU_CYCLES));
(gdb) n
1693 TEST_ASSERT_VAL("wrong name setting", strcmp(evsel->name, "name") == 0);
(gdb) n

Program received signal SIGSEGV, Segmentation fault.

I could fix this by checking for NULL pointer, but I have the feeling that there is more to it. However I do not fully understand the latest rework on the event handling.

Quoted 5 lines

The other test cases listed above fail due to the same root cause, no PMU found.

Please advise. What should all these test return when a system does not have any PMU defined at all?

So I was writing a response then figured out I've already fixed this but it looks like the patch hasn't been taken yet:
https://lore.kernel.org/lkml/[email protected]/

Arnaldo, could you take a look?

Thanks,
Ian

Quoted 8 lines

Thanks a lot.

--
Thomas Richter, Dept 3303, IBM s390 Linux Development, Boeblingen, Germany --
Vorsitzender des Aufsichtsrats: Gregor Pillen
Geschäftsführung: David Faller
Sitz der Gesellschaft: Böblingen / Registergericht: Amtsgericht Stuttgart, HRB 243294

author Tested-by
#2 lore raw
Quoted 69 lines · Ian Rogers
Quoted 14 lines · Thomas Richter

Using Linux 6.5.0rc3 perf test case 6 dumps core on an s390 without configured PMU (this can happen depending on customer machine configuration).

In this configuration several perf test cases fail:

 # ./perf test 2>&1 | grep FAIL
  6.1: Test event parsing                                : FAILED!
 10.3: Parsing of PMU event table metrics                : FAILED!
 10.4: Parsing of PMU event table metrics with fake PMUs : FAILED!
 28: Use a dummy software event to keep tracking         : FAILED!
 35: Track with sched_switch                             : FAILED!
 66: Parse and process metrics                           : FAILED!
 #
Quoted 7 lines

Even worse the test case 6 dumps core:

 # ./perf test -F 6
  6: Parse event definition strings                      :
  6.1: Test event parsing                                :
 Segmentation fault (core dumped)
 #

Thanks for reporting this!

Quoted 38 lines

The root cause for these failures and core dump is a missing
PMU, as can be seen by the debug output:
...
Event test failure: test 57 'instructions:uep'
running test 58 '{cycles,cache-misses,branch-misses}:e'
No PMU found for 'cycles' <-- Here no PMU is found, because there is none!

   FAILED tests/parse-events.c:1516 wrong number of entries
   Event test failure: test 58 '{cycles,cache-misses,branch-misses}:e'

Here no PMU is found, because there is none!

....
running test 59 'cycles/name=name/'
No PMU found for 'name'
Segmentation fault (core dumped)

Here the root cause in in function test__term_equal_term() variable evsel->name is NULL:

 # gdb ./perf
....
Breakpoint 1, test__term_equal_term (evlist=0x1542c00) at\
                       tests/parse-events.c:1688
(gdb) p evsel->name
$3 = 0x3fff7fe3dc0 ""
(gdb) n
 691 TEST_ASSERT_VAL("wrong type", evsel->core.attr.type == PERF_TYPE_HARDWARE);
(gdb) n
1692 TEST_ASSERT_VAL("wrong config", test_config(evsel, PERF_COUNT_HW_CPU_CYCLES));
(gdb) n
1693 TEST_ASSERT_VAL("wrong name setting", strcmp(evsel->name, "name") == 0);
(gdb) n

Program received signal SIGSEGV, Segmentation fault.

I could fix this by checking for NULL pointer, but I have the feeling that there is more to it. However I do not fully understand the latest rework on the event handling.

Quoted 5 lines

The other test cases listed above fail due to the same root cause, no PMU found.

Please advise. What should all these test return when a system does not have any PMU defined at all?

Quoted 9 lines

So I was writing a response then figured out I've already fixed this but it looks like the patch hasn't been taken yet:
https://lore.kernel.org/lkml/[email protected]/

Arnaldo, could you take a look?

Thanks,
Ian

Ian,

thanks a lot. I applied both patches you mentioned above and the test cases work fine.
You have my

Quoted 7 lines
Quoted 7 lines

--
Thomas Richter, Dept 3303, IBM s390 Linux Development, Boeblingen, Germany --
Vorsitzender des Aufsichtsrats: Gregor Pillen
Geschäftsführung: David Faller
Sitz der Gesellschaft: Böblingen / Registergericht: Amtsgericht Stuttgart, HRB 243294

Signature · 5 lines
Thomas Richter, Dept 3303, IBM s390 Linux Development, Boeblingen, Germany
--
Vorsitzender des Aufsichtsrats: Gregor Pillen
Geschäftsführung: David Faller
Sitz der Gesellschaft: Böblingen / Registergericht: Amtsgericht Stuttgart, HRB 243294
#3 lore raw

Em Mon, Jul 31, 2023 at 11:42:31AM +0200, Thomas Richter escreveu:

Quoted 80 lines · Ian Rogers
Quoted 69 lines · Thomas Richter
Quoted 14 lines

Using Linux 6.5.0rc3 perf test case 6 dumps core on an s390 without configured PMU (this can happen depending on customer machine configuration).

In this configuration several perf test cases fail:

 # ./perf test 2>&1 | grep FAIL
  6.1: Test event parsing                                : FAILED!
 10.3: Parsing of PMU event table metrics                : FAILED!
 10.4: Parsing of PMU event table metrics with fake PMUs : FAILED!
 28: Use a dummy software event to keep tracking         : FAILED!
 35: Track with sched_switch                             : FAILED!
 66: Parse and process metrics                           : FAILED!
 #
Quoted 7 lines

Even worse the test case 6 dumps core:

 # ./perf test -F 6
  6: Parse event definition strings                      :
  6.1: Test event parsing                                :
 Segmentation fault (core dumped)
 #

Thanks for reporting this!

Quoted 38 lines

The root cause for these failures and core dump is a missing
PMU, as can be seen by the debug output:
...
Event test failure: test 57 'instructions:uep'
running test 58 '{cycles,cache-misses,branch-misses}:e'
No PMU found for 'cycles' <-- Here no PMU is found, because there is none!

   FAILED tests/parse-events.c:1516 wrong number of entries
   Event test failure: test 58 '{cycles,cache-misses,branch-misses}:e'

Here no PMU is found, because there is none!

....
running test 59 'cycles/name=name/'
No PMU found for 'name'
Segmentation fault (core dumped)

Here the root cause in in function test__term_equal_term() variable evsel->name is NULL:

 # gdb ./perf
....
Breakpoint 1, test__term_equal_term (evlist=0x1542c00) at\
                       tests/parse-events.c:1688
(gdb) p evsel->name
$3 = 0x3fff7fe3dc0 ""
(gdb) n
 691 TEST_ASSERT_VAL("wrong type", evsel->core.attr.type == PERF_TYPE_HARDWARE);
(gdb) n
1692 TEST_ASSERT_VAL("wrong config", test_config(evsel, PERF_COUNT_HW_CPU_CYCLES));
(gdb) n
1693 TEST_ASSERT_VAL("wrong name setting", strcmp(evsel->name, "name") == 0);
(gdb) n

Program received signal SIGSEGV, Segmentation fault.

I could fix this by checking for NULL pointer, but I have the feeling that there is more to it. However I do not fully understand the latest rework on the event handling.

Quoted 5 lines

The other test cases listed above fail due to the same root cause, no PMU found.

Please advise. What should all these test return when a system does not have any PMU defined at all?

Quoted 9 lines

So I was writing a response then figured out I've already fixed this but it looks like the patch hasn't been taken yet:
https://lore.kernel.org/lkml/[email protected]/

Arnaldo, could you take a look?

Thanks,
Ian

Quoted 6 lines

Ian,

thanks a lot. I applied both patches you mentioned above and the test cases work fine.
You have my

Thanks, applied.

- Arnaldo