Skip to contentSkip to conversation

u-boot-riscv/master

GIT PULL Leo Liang 3 participants 4 messages Aug 2, 2023 – Aug 3, 2023

lore
Share & tools
lore

Leo Liang

author
#0 lore raw

Hi Tom,

The following changes since commit 7755b2200777f72dca87dd169138e95f011bbcb9:

Merge tag 'x86-pull-20230801' of https://source.denx.de/u-boot/custodians/u-boot-x86 (2023-08-01 11:57:55 -0400)

are available in the Git repository at:

https://source.denx.de/u-boot/custodians/u-boot-riscv.git

for you to fetch changes up to 093bd0354e5b947b0bd634bf5ed4041ba075b57d:

acpi: Add missing RISC-V acpi_table header (2023-08-02 11:02:33 +0800)

CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/17177

----------------------------------------------------------------

+ Fix compilation error for CI when enabling RTL8169 driver
+ Fix compilation error for pci_mmc.c by adding acpi_table header file
+ Support StarFive JH7110 PCIe driver
+ Enable PCI on Unmatched board

----------------------------------------------------------------

Heinrich Schuchardt (2):
riscv: sifive: initialize PCI on Unmatched
acpi: Add missing RISC-V acpi_table header

Mason Huo (3):
starfive: pci: Add StarFive JH7110 pcie driver
configs: starfive-jh7110: Add support for PCIe host driver
riscv: dts: starfive: Enable PCIe host controller

Minda Chen (5):
i2c: designware: Add Kconfig for designware_i2c_pci.c
net: rtl8169: Fix compile warning in rtl8169
net: rtl8169: Fix DMA minimal aligned compile warning in RISC-V
net: rtl8169: Add one device ID 0x8161
configs: starfive-jh7110: Add CONFIG_RTL8169

 arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi |  11 +++++++
 arch/riscv/dts/jh7110.dtsi                       |  74 +++++++++++++++++++++++++++++++++++++++++
 arch/riscv/include/asm/acpi_table.h              |  11 +++++++
 configs/sifive_unmatched_defconfig               |   1 +
 configs/starfive_visionfive2_defconfig           |   8 +++++
 drivers/i2c/Kconfig                              |   9 +++++
 drivers/i2c/Makefile                             |   4 +--
 drivers/net/rtl8169.c                            |  22 ++++++++-----
 drivers/pci/Kconfig                              |  13 ++++++++
 drivers/pci/Makefile                             |   2 ++
 drivers/pci/pcie_plda_common.c                   | 116 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/pci/pcie_plda_common.h                   | 118 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/pci/pcie_starfive_jh7110.c               | 317 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 13 files changed, 694 insertions(+), 12 deletions(-)
 create mode 100644 arch/riscv/include/asm/acpi_table.h
 create mode 100644 drivers/pci/pcie_plda_common.c
 create mode 100644 drivers/pci/pcie_plda_common.h
 create mode 100644 drivers/pci/pcie_starfive_jh7110.c

Best regards,
Leo

#1 lore raw

Hi Leo,

Quoted 35 lines · Leo Liang

Hi Tom,

The following changes since commit 7755b2200777f72dca87dd169138e95f011bbcb9:

Merge tag 'x86-pull-20230801' of https://source.denx.de/u-boot/custodians/u-boot-x86 (2023-08-01 11:57:55 -0400)

are available in the Git repository at:

https://source.denx.de/u-boot/custodians/u-boot-riscv.git

for you to fetch changes up to 093bd0354e5b947b0bd634bf5ed4041ba075b57d:

acpi: Add missing RISC-V acpi_table header (2023-08-02 11:02:33 +0800)

CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/17177

----------------------------------------------------------------

+ Fix compilation error for CI when enabling RTL8169 driver
+ Fix compilation error for pci_mmc.c by adding acpi_table header file
+ Support StarFive JH7110 PCIe driver
+ Enable PCI on Unmatched board

----------------------------------------------------------------

Heinrich Schuchardt (2):
riscv: sifive: initialize PCI on Unmatched
acpi: Add missing RISC-V acpi_table header

Mason Huo (3):
starfive: pci: Add StarFive JH7110 pcie driver
configs: starfive-jh7110: Add support for PCIe host driver
riscv: dts: starfive: Enable PCIe host controller

Quoted 7 lines

Minda Chen (5):
i2c: designware: Add Kconfig for designware_i2c_pci.c
net: rtl8169: Fix compile warning in rtl8169
net: rtl8169: Fix DMA minimal aligned compile warning in RISC-V
net: rtl8169: Add one device ID 0x8161
configs: starfive-jh7110: Add CONFIG_RTL8169

Looks the second half of this series is missed?
https://patchwork.ozlabs.org/project/uboot/list/?series=365237

Regards,
Bin

author
#2 lore raw

Hi Bin,

Quoted 46 lines · Bin Meng

Hi Leo,

Quoted 35 lines · Leo Liang

Hi Tom,

The following changes since commit 7755b2200777f72dca87dd169138e95f011bbcb9:

Merge tag 'x86-pull-20230801' of https://source.denx.de/u-boot/custodians/u-boot-x86 (2023-08-01 11:57:55 -0400)

are available in the Git repository at:

https://source.denx.de/u-boot/custodians/u-boot-riscv.git

for you to fetch changes up to 093bd0354e5b947b0bd634bf5ed4041ba075b57d:

acpi: Add missing RISC-V acpi_table header (2023-08-02 11:02:33 +0800)

CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/17177

----------------------------------------------------------------

+ Fix compilation error for CI when enabling RTL8169 driver
+ Fix compilation error for pci_mmc.c by adding acpi_table header file
+ Support StarFive JH7110 PCIe driver
+ Enable PCI on Unmatched board

----------------------------------------------------------------

Heinrich Schuchardt (2):
riscv: sifive: initialize PCI on Unmatched
acpi: Add missing RISC-V acpi_table header

Mason Huo (3):
starfive: pci: Add StarFive JH7110 pcie driver
configs: starfive-jh7110: Add support for PCIe host driver
riscv: dts: starfive: Enable PCIe host controller

Quoted 7 lines

Minda Chen (5):
i2c: designware: Add Kconfig for designware_i2c_pci.c
net: rtl8169: Fix compile warning in rtl8169
net: rtl8169: Fix DMA minimal aligned compile warning in RISC-V
net: rtl8169: Add one device ID 0x8161
configs: starfive-jh7110: Add CONFIG_RTL8169

Quoted 5 lines

Looks the second half of this series is missed?
https://patchwork.ozlabs.org/project/uboot/list/?series=365237

Regards,
Bin

Thanks for the reminder!
I did omit this second half of the series by accident! I will re-send the PR again ASAP!

Best regards,
Leo

#3 lore raw
Quoted 55 lines · Leo Liang

Hi Bin,

Quoted 46 lines · Bin Meng

Hi Leo,

Quoted 35 lines · Leo Liang

Hi Tom,

The following changes since commit 7755b2200777f72dca87dd169138e95f011bbcb9:

Merge tag 'x86-pull-20230801' of https://source.denx.de/u-boot/custodians/u-boot-x86 (2023-08-01 11:57:55 -0400)

are available in the Git repository at:

https://source.denx.de/u-boot/custodians/u-boot-riscv.git

for you to fetch changes up to 093bd0354e5b947b0bd634bf5ed4041ba075b57d:

acpi: Add missing RISC-V acpi_table header (2023-08-02 11:02:33 +0800)

CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/17177

----------------------------------------------------------------

+ Fix compilation error for CI when enabling RTL8169 driver
+ Fix compilation error for pci_mmc.c by adding acpi_table header file
+ Support StarFive JH7110 PCIe driver
+ Enable PCI on Unmatched board

----------------------------------------------------------------

Heinrich Schuchardt (2):
riscv: sifive: initialize PCI on Unmatched
acpi: Add missing RISC-V acpi_table header

Mason Huo (3):
starfive: pci: Add StarFive JH7110 pcie driver
configs: starfive-jh7110: Add support for PCIe host driver
riscv: dts: starfive: Enable PCIe host controller

Quoted 7 lines

Minda Chen (5):
i2c: designware: Add Kconfig for designware_i2c_pci.c
net: rtl8169: Fix compile warning in rtl8169
net: rtl8169: Fix DMA minimal aligned compile warning in RISC-V
net: rtl8169: Add one device ID 0x8161
configs: starfive-jh7110: Add CONFIG_RTL8169

Quoted 5 lines

Looks the second half of this series is missed?
https://patchwork.ozlabs.org/project/uboot/list/?series=365237

Regards,
Bin

Quoted 6 lines

Thanks for the reminder!
I did omit this second half of the series by accident! I will re-send the PR again ASAP!

Best regards,
Leo

Hi Leo and Bin
Thanks!