soc/tegra: fuse: Add ACPI support
cover soc/tegra: fuse: Add ACPI support
This series of patches add ACPI support for Tegra194 and Tegra234 in Tegra fuse and apbmisc drivers. It also adds support for Tegra241 which uses ACPI boot
Kartik (6):
soc/tegra: fuse: Add tegra_acpi_init_apbmisc() soc/tegra: fuse: Add function to register nvmem soc/tegra: fuse: Add function to add lookups soc/tegra: fuse: Add function to print SKU info soc/tegra: fuse: Add ACPI support for Tegra194 and Tegra234 soc/tegra: fuse: Add support for Tegra241
drivers/soc/tegra/Kconfig | 5 + drivers/soc/tegra/fuse/fuse-tegra.c | 180 +++++++++++++++++++------ drivers/soc/tegra/fuse/fuse-tegra30.c | 25 ++++ drivers/soc/tegra/fuse/fuse.h | 5 + drivers/soc/tegra/fuse/tegra-apbmisc.c | 74 +++++++--- include/soc/tegra/fuse.h | 1 + 6 files changed, 235 insertions(+), 55 deletions(-)
Signature · 1 line
2.34.1
PATCH 1/6 soc/tegra: fuse: Add tegra_acpi_init_apbmisc()
In preparation to ACPI support in Tegra fuse driver add function tegra_acpi_init_apbmisc() and move common code used for both ACPI and device-tree into a new helper function tegra_init_apbmisc_base().
Note that function tegra_acpi_init_apbmisc() is not placed in the __init section, because it will be called during probe.
--- drivers/soc/tegra/fuse/fuse.h | 1 + drivers/soc/tegra/fuse/tegra-apbmisc.c | 73 ++++++++++++++++++++------ 2 files changed, 58 insertions(+), 16 deletions(-)
drivers/soc/tegra/fuse/fuse.h +1 -0
@@ -69,6 +69,7 @@ struct tegra_fuse {void tegra_init_revision (void );void tegra_init_apbmisc (void ); +void tegra_acpi_init_apbmisc (void );u32 __init tegra_fuse_read_spare (unsigned int spare);u32 __init tegra_fuse_read_early (unsigned int offset);
drivers/soc/tegra/fuse/tegra-apbmisc.c +57 -16
101 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH 1/6] soc/tegra: fuse: Add tegra_acpi_init_apbmisc()
Quoted 6 lines · Kartik
In preparation to ACPI support in Tegra fuse driver add function
tegra_acpi_init_apbmisc()and move common code used for both ACPI and device-tree into a new helper functiontegra_init_apbmisc_base().Note that function
tegra_acpi_init_apbmisc()is not placed in the__initsection, because it will be called during probe.
...
Quoted 3 lines
void
tegra_init_revision(void);
voidtegra_init_apbmisc(void);
+voidtegra_acpi_init_apbmisc(void);
Why do you need a separate function?
...
drivers/soc/tegra/fuse/tegra-apbmisc.c int tegra194_miscreg_mask_serror(void) · line 125
Quoted 2 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +2
-0+static const struct acpi_device_id apbmisc_acpi_match[] = { + { .id ="NVDA2010" ,0 },
We rarely use C99 initializers for ACPI ID table.
Also 0 is not needed.
Quoted 2 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +2
-0+ {/* sentinel */ } +};
...
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_revision(void) · line 178
Quoted 4 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +4
-0+if (!apbmisc_base) +pr_err ("failed to map APBMISC registers\n" ); +else + chipid =readl_relaxed (apbmisc_base +4 );
Why not positive conditional as you have two branches anyway?
...
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_revision(void) · line 186
Quoted 6 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +6
-0+if (!strapping_base) { +pr_err ("failed to map strapping options registers\n" ); + }else { + strapping =readl_relaxed (strapping_base); +iounmap (strapping_base); + }
Ditto.
...
Quoted 6 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +0
-6- apbmisc_base =ioremap (apbmisc.start,resource_size (&apbmisc)); -if (!apbmisc_base) { -pr_err ("failed to map APBMISC registers\n" ); - }else { - chipid =readl_relaxed (apbmisc_base +4 ); - }
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_apbmisc(void) · line 247
Quoted 10 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +1
-9- - strapping_base =ioremap (straps.start,resource_size (&straps)); -if (!strapping_base) { -pr_err ("failed to map strapping options registers\n" ); - }else { - strapping =readl_relaxed (strapping_base); -iounmap (strapping_base); - } - +tegra_init_apbmisc_base (&apbmisc, &straps);
This split can be done in a separate precursor patch.
...
Quoted 7 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +7
-0+void tegra_acpi_init_apbmisc (void ) +{ +struct acpi_device *adev =NULL ; +struct resource *apbmisc, *straps; +struct list_head resource_list; +struct resource_entry *rentry; +int rcount;
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_apbmisc(void) · line 270
Quoted 10 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +10
-0+ + adev =acpi_dev_get_first_match_dev (apbmisc_acpi_match[0 ].id,NULL ,-1 ); +if (!adev) +return ; + +INIT_LIST_HEAD (&resource_list); + + rcount =acpi_dev_get_memory_resources (adev, &resource_list); +if (rcount !=2 ) { +pr_err ("failed to get APBMISC memory resources" );
(1)
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_apbmisc(void) · line 277
Quoted 7 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +6
-0+return ; + } + rentry = list_first_entry(&resource_list, struct resource_entry, node); + apbmisc = rentry->res; + rentry =list_next_entry (rentry, node); + straps = rentry->res;
We don't do like this, we walk through them and depending on the type and index do something. The above if error prone and not scalable code.
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_apbmisc(void) · line 280
Quoted 3 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +2
-0+tegra_init_apbmisc_base (apbmisc, straps); +acpi_dev_free_resource_list (&resource_list);
Not okay in (1).
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_apbmisc(void) · line 281
Quoted 1 line
drivers/soc/tegra/fuse/tegra-apbmisc.c +1
-0+acpi_dev_put (adev);
Not okay in (1).
Quoted 1 line
+}
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH 1/6] soc/tegra: fuse: Add tegra_acpi_init_apbmisc()
Thanks for reviewing the patches Andy!
Quoted 5 lines · Andy Shevchenko
Quoted 3 lines
void
tegra_init_revision(void);
voidtegra_init_apbmisc(void);
+voidtegra_acpi_init_apbmisc(void);Why do you need a separate function?
Function tegra_init_apbmisc() is called from tegra_init_fuse() which is invoked at early init and it also has __init keyword. If we use the same function for both ACPI/DT, then we will get init section mismatches when the Tegra Fuse driver probes using ACPI.
We can use the same function by dropping the init keyword. But the way we are getting the resources for device-tree and on ACPI is slightly different. Hence, I kept a separate function for ACPI and move the common bits to a function shared between tegra_init_apbmisc() and tegra_acpi_init_apbmisc().
Quoted 8 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c int tegra194_miscreg_mask_serror(void) · line 125
Quoted 4 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +2
-0+static const struct acpi_device_id apbmisc_acpi_match[] = { + { .id ="NVDA2010" ,0 },We rarely use C99 initializers for ACPI ID table.
Also 0 is not needed.
I will update this in the next patch.
...
Quoted 18 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_revision(void) · line 178
Quoted 4 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +4
-0+if (!apbmisc_base) +pr_err ("failed to map APBMISC registers\n" ); +else + chipid =readl_relaxed (apbmisc_base +4 );Why not positive conditional as you have two branches anyway?
...
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_revision(void) · line 186
Quoted 6 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +6
-0+if (!strapping_base) { +pr_err ("failed to map strapping options registers\n" ); + }else { + strapping =readl_relaxed (strapping_base); +iounmap (strapping_base); + }Ditto.
Quoted 2 lines
...
Sure, I will update these in the next patch.
...
Quoted 10 lines
Quoted 10 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +0
-10- apbmisc_base =ioremap (apbmisc.start,resource_size (&apbmisc)); -if (!apbmisc_base) { -pr_err ("failed to map APBMISC registers\n" ); - }else { - chipid =readl_relaxed (apbmisc_base +4 ); - } - - strapping_base =ioremap (straps.start,resource_size (&straps)); -if (!strapping_base) { -pr_err ("failed to map strapping options registers\n" );
Quoted 8 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_apbmisc(void) · line 247
Quoted 6 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +1
-5- }else { - strapping =readl_relaxed (strapping_base); -iounmap (strapping_base); - } - +tegra_init_apbmisc_base (&apbmisc, &straps);This split can be done in a separate precursor patch.
ACK.
...
Quoted 23 lines
Quoted 7 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +7
-0+void tegra_acpi_init_apbmisc (void ) +{ +struct acpi_device *adev =NULL ; +struct resource *apbmisc, *straps; +struct list_head resource_list; +struct resource_entry *rentry; +int rcount;drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_apbmisc(void) · line 270
Quoted 10 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +10
-0+ + adev =acpi_dev_get_first_match_dev (apbmisc_acpi_match[0 ].id,NULL ,-1 ); +if (!adev) +return ; + +INIT_LIST_HEAD (&resource_list); + + rcount =acpi_dev_get_memory_resources (adev, &resource_list); +if (rcount !=2 ) { +pr_err ("failed to get APBMISC memory resources" );(1)
Quoted 2 lines
(quoted diff) +2
-0+ return; + }
Quoted 7 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_apbmisc(void) · line 277
Quoted 4 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +4
-0+ rentry = list_first_entry(&resource_list, struct resource_entry, node); + apbmisc = rentry->res; + rentry =list_next_entry (rentry, node); + straps = rentry->res;We don't do like this, we walk through them and depending on the type and index do something. The above if error prone and not scalable code.
I will fix this logic in next patch.
Quoted 10 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_apbmisc(void) · line 280
Quoted 4 lines
drivers/soc/tegra/fuse/tegra-apbmisc.c +2
-0+tegra_init_apbmisc_base (apbmisc, straps); +acpi_dev_free_resource_list (&resource_list);Not okay in (1).
drivers/soc/tegra/fuse/tegra-apbmisc.c void __init tegra_init_apbmisc(void) · line 281
Quoted 1 line
drivers/soc/tegra/fuse/tegra-apbmisc.c +1
-0+acpi_dev_put (adev);Not okay in (1).
Yes, these won't be called when rcount is 1. I will update this in the next patch set.
Quoted 1 line
+}
Regards,
Kartik
Re: [PATCH 1/6] soc/tegra: fuse: Add tegra_acpi_init_apbmisc()
Quoted 1 line · Kartik
On Fri, 2023-08-18 at 16:21 +0300, Andy Shevchenko wrote:
...
Quoted 11 lines
Quoted 5 lines
Quoted 3 lines
void
tegra_init_revision(void);
voidtegra_init_apbmisc(void);
+voidtegra_acpi_init_apbmisc(void);Why do you need a separate function?
Function
tegra_init_apbmisc()is called fromtegra_init_fuse()which is invoked at early init and it also has__initkeyword. If we use the same function for both ACPI/DT, then we will get init section mismatches when the Tegra Fuse driver probes using ACPI.
Quoted 5 lines
We can use the same function by dropping the
initkeyword. But the way we are getting the resources for device-tree and on ACPI is slightly different. Hence, I kept a separate function for ACPI and move the common bits to a function shared betweentegra_init_apbmisc()andtegra_acpi_init_apbmisc().
So, you mean that behaviour is different for ACPI and DT cases. Then obvious question why DT case can't be delayed to not so early stage to be run? This requires some explanations, more than given in the commit message and here.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH 1/6] soc/tegra: fuse: Add tegra_acpi_init_apbmisc()
Quoted 22 lines · Andy Shevchenko
Quoted 1 line · Kartik
On Fri, 2023-08-18 at 16:21 +0300, Andy Shevchenko wrote:
...
Quoted 11 lines
Quoted 5 lines
Quoted 3 lines
void
tegra_init_revision(void);
voidtegra_init_apbmisc(void);
+voidtegra_acpi_init_apbmisc(void);Why do you need a separate function?
Function
tegra_init_apbmisc()is called fromtegra_init_fuse()which is invoked at early init and it also has__initkeyword. If we use the same function for both ACPI/DT, then we will get init section mismatches when the Tegra Fuse driver probes using ACPI.Quoted 5 lines
We can use the same function by dropping the
initkeyword. But the way we are getting the resources for device-tree and on ACPI is slightly different. Hence, I kept a separate function for ACPI and move the common bits to a function shared betweentegra_init_apbmisc()andtegra_acpi_init_apbmisc().
Quoted 4 lines
So, you mean that behaviour is different for ACPI and DT cases. Then obvious question why DT case can't be delayed to not so early stage to be run? This requires some explanations, more than given in the commit message and here.
We've done some experiments in the past to unify this and unfortunately we can't. The reason is that some of the old 32-bit ARM code needs some information from the APBMISC registers very early during boot (among other things for SMP support), so delaying this doesn't work.
I agree that it would be good to put this into some comment for later reference.
Thierry
kernel test robot
build botRe: [PATCH 1/6] soc/tegra: fuse: Add tegra_acpi_init_apbmisc()
In reply to Kartikkernel test robot noticed the following build errors:
Hi Kartik,
kernel test robot noticed the following build errors:
[auto build test ERROR on tegra/for-next]
[also build test ERROR on soc/for-next linus/master v6.5-rc7 next-20230821] [cannot apply to tegra-drm/drm/tegra/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Kartik/soc-tegra-fuse-Add-tegra_acpi_init_apbmisc/20230821-095539 base: https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git for-next patch link: https://lore.kernel.org/r/20230818093028.7807-2-kkartik%40nvidia.com patch subject: [PATCH 1/6] soc/tegra: fuse: Add tegra_acpi_init_apbmisc() config: arm-randconfig-r004-20230822 (https://download.01.org/0day-ci/archive/20230822/[email protected]/config) compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project.git 4a5ac14ee968ff0ad5d2cc1ffa0299048db4c88a) reproduce: (https://download.01.org/0day-ci/archive/20230822/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
>> drivers/soc/tegra/fuse/tegra-apbmisc.c:268:11: error: call to undeclared function 'acpi_dev_get_memory_resources'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
268 | rcount = acpi_dev_get_memory_resources(adev, &resource_list);
| ^
>> drivers/soc/tegra/fuse/tegra-apbmisc.c:280:2: error: call to undeclared function 'acpi_dev_free_resource_list'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
280 | acpi_dev_free_resource_list(&resource_list);
| ^2 errors generated.
vim +/acpi_dev_get_memory_resources +268 drivers/soc/tegra/fuse/tegra-apbmisc.c
253
254 void tegra_acpi_init_apbmisc(void)
255 {
256 struct acpi_device *adev = NULL;
257 struct resource *apbmisc, *straps;
258 struct list_head resource_list;
259 struct resource_entry *rentry;
260 int rcount;
261
262 adev = acpi_dev_get_first_match_dev(apbmisc_acpi_match[0].id, NULL, -1);
263 if (!adev)
264 return;
265
266 INIT_LIST_HEAD(&resource_list);
267
> 268 rcount = acpi_dev_get_memory_resources(adev, &resource_list);
269 if (rcount != 2) {
270 pr_err("failed to get APBMISC memory resources");
271 return;
272 }
273
274 rentry = list_first_entry(&resource_list, struct resource_entry, node);
275 apbmisc = rentry->res;
276 rentry = list_next_entry(rentry, node);
277 straps = rentry->res;
278
279 tegra_init_apbmisc_base(apbmisc, straps);
> 280 acpi_dev_free_resource_list(&resource_list);Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
kernel test robot
build botRe: [PATCH 1/6] soc/tegra: fuse: Add tegra_acpi_init_apbmisc()
In reply to Kartikkernel test robot noticed the following build errors:
Hi Kartik,
kernel test robot noticed the following build errors:
[auto build test ERROR on tegra/for-next]
[also build test ERROR on soc/for-next linus/master v6.5-rc7 next-20230821] [cannot apply to tegra-drm/drm/tegra/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Kartik/soc-tegra-fuse-Add-tegra_acpi_init_apbmisc/20230821-095539 base: https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git for-next patch link: https://lore.kernel.org/r/20230818093028.7807-2-kkartik%40nvidia.com patch subject: [PATCH 1/6] soc/tegra: fuse: Add tegra_acpi_init_apbmisc() config: arm-defconfig (https://download.01.org/0day-ci/archive/20230822/[email protected]/config) compiler: arm-linux-gnueabi-gcc (GCC) 12.3.0 reproduce: (https://download.01.org/0day-ci/archive/20230822/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
drivers/soc/tegra/fuse/tegra-apbmisc.c: In function 'tegra_acpi_init_apbmisc':
>> drivers/soc/tegra/fuse/tegra-apbmisc.c:268:18: error: implicit declaration of function 'acpi_dev_get_memory_resources'; did you mean 'acpi_get_event_resources'? [-Werror=implicit-function-declaration]
268 | rcount = acpi_dev_get_memory_resources(adev, &resource_list);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| acpi_get_event_resources
>> drivers/soc/tegra/fuse/tegra-apbmisc.c:280:9: error: implicit declaration of function 'acpi_dev_free_resource_list' [-Werror=implicit-function-declaration]
280 | acpi_dev_free_resource_list(&resource_list);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~cc1: some warnings being treated as errors
vim +268 drivers/soc/tegra/fuse/tegra-apbmisc.c
253
254 void tegra_acpi_init_apbmisc(void)
255 {
256 struct acpi_device *adev = NULL;
257 struct resource *apbmisc, *straps;
258 struct list_head resource_list;
259 struct resource_entry *rentry;
260 int rcount;
261
262 adev = acpi_dev_get_first_match_dev(apbmisc_acpi_match[0].id, NULL, -1);
263 if (!adev)
264 return;
265
266 INIT_LIST_HEAD(&resource_list);
267
> 268 rcount = acpi_dev_get_memory_resources(adev, &resource_list);
269 if (rcount != 2) {
270 pr_err("failed to get APBMISC memory resources");
271 return;
272 }
273
274 rentry = list_first_entry(&resource_list, struct resource_entry, node);
275 apbmisc = rentry->res;
276 rentry = list_next_entry(rentry, node);
277 straps = rentry->res;
278
279 tegra_init_apbmisc_base(apbmisc, straps);
> 280 acpi_dev_free_resource_list(&resource_list);Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
PATCH 2/6 soc/tegra: fuse: Add function to register nvmem
In reply to KartikAdd helper function tegra_fuse_nvmem_register() to register Tegra Fuse nvmem and use it in tegra_fuse_probe(). So, this can be shared between device-tree and ACPI probe, which is to be introduced later.
--- drivers/soc/tegra/fuse/fuse-tegra.c | 62 +++++++++++++++++------------ 1 file changed, 37 insertions(+), 25 deletions(-)
drivers/soc/tegra/fuse/fuse-tegra.c +37 -25
@@ -113,10 +113,44 @@ static void tegra_fuse_restore(void *base) fuse->clk =NULL ; } +static int tegra_fuse_nvmem_register (struct tegra_fuse *fuse, +struct device *dev) +{ +struct nvmem_config nvmem; +int err; + +memset (&nvmem,0 ,sizeof (nvmem)); + nvmem.dev = dev; + nvmem.name ="fuse" ; + nvmem.id =-1 ; + nvmem.owner =THIS_MODULE ; + nvmem.cells = fuse->soc->cells; + nvmem.ncells = fuse->soc->num_cells; + nvmem.keepout = fuse->soc->keepouts; + nvmem.nkeepout = fuse->soc->num_keepouts; + nvmem.type =NVMEM_TYPE_OTP ; + nvmem.read_only = true; + nvmem.root_only = false; + nvmem.reg_read = tegra_fuse_read; + nvmem.size = fuse->soc->info->size; + nvmem.word_size =4 ; + nvmem.stride =4 ; + nvmem.priv = fuse; + + fuse->nvmem =devm_nvmem_register (dev, &nvmem); +if (IS_ERR (fuse->nvmem)) { + err =PTR_ERR (fuse->nvmem); +dev_err (dev,"failed to register NVMEM device: %d\n" , + err); +return err; + } + +return 0 ; +} +static int tegra_fuse_probe (struct platform_device *pdev) {void __iomem *base = fuse->base; -struct nvmem_config nvmem;struct resource *res;int err;
@@ -152,31 +186,9 @@ static int tegra_fuse_probe(struct platform_device *pdev)return err; } -memset (&nvmem,0 ,sizeof (nvmem)); - nvmem.dev = &pdev->dev; - nvmem.name ="fuse" ; - nvmem.id =-1 ; - nvmem.owner =THIS_MODULE ; - nvmem.cells = fuse->soc->cells; - nvmem.ncells = fuse->soc->num_cells; - nvmem.keepout = fuse->soc->keepouts; - nvmem.nkeepout = fuse->soc->num_keepouts; - nvmem.type =NVMEM_TYPE_OTP ; - nvmem.read_only = true; - nvmem.root_only = false; - nvmem.reg_read = tegra_fuse_read; - nvmem.size = fuse->soc->info->size; - nvmem.word_size =4 ; - nvmem.stride =4 ; - nvmem.priv = fuse; - - fuse->nvmem =devm_nvmem_register (&pdev->dev, &nvmem); -if (IS_ERR (fuse->nvmem)) { - err =PTR_ERR (fuse->nvmem); -dev_err (&pdev->dev,"failed to register NVMEM device: %d\n" , - err); + err =tegra_fuse_nvmem_register (fuse, &pdev->dev); +if (err)return err; - } fuse->rst =devm_reset_control_get_optional (&pdev->dev,"fuse" );if (IS_ERR (fuse->rst)) {
Signature · 1 line
2.34.1
Re: [PATCH 2/6] soc/tegra: fuse: Add function to register nvmem
Quoted 4 lines · Kartik
Add helper function
tegra_fuse_nvmem_register()to register Tegra Fuse nvmem and use it integra_fuse_probe(). So, this can be shared between device-tree and ACPI probe, which is to be introduced later.
...
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_restore(void *base) · line 145
Quoted 7 lines
drivers/soc/tegra/fuse/fuse-tegra.c +6
-0+ fuse->nvmem =devm_nvmem_register (dev, &nvmem); +if (IS_ERR (fuse->nvmem)) { + err =PTR_ERR (fuse->nvmem); +dev_err (dev,"failed to register NVMEM device: %d\n" , + err); +return err;
return dev_err_probe();
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_restore(void *base) · line 149
Quoted 4 lines
drivers/soc/tegra/fuse/fuse-tegra.c +4
-0+ } + +return 0 ; +}
...
Seems it comes from the original code, so consider this as a suggestion for an additional improvement.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH 2/6] soc/tegra: fuse: Add function to register nvmem
Quoted 25 lines · Andy Shevchenko
Quoted 4 lines · Kartik
Add helper function
tegra_fuse_nvmem_register()to register Tegra Fuse nvmem and use it integra_fuse_probe(). So, this can be shared between device-tree and ACPI probe, which is to be introduced later....
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_restore(void *base) · line 145
Quoted 7 lines
drivers/soc/tegra/fuse/fuse-tegra.c +6
-0+ fuse->nvmem =devm_nvmem_register (dev, &nvmem); +if (IS_ERR (fuse->nvmem)) { + err =PTR_ERR (fuse->nvmem); +dev_err (dev,"failed to register NVMEM device: %d\n" , + err); +return err;return dev_err_probe();Quoted 4 lines
drivers/soc/tegra/fuse/fuse-tegra.c +4
-0+ } + +return 0 ; +}...
Quoted 6 lines
Seems it comes from the original code, so consider this as a suggestion for an additional improvement.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Thanks Andy, I will update this.
Regards,
Kartik
PATCH 3/6 soc/tegra: fuse: Add function to add lookups
In reply to KartikAdd helper function tegra_fuse_add_lookups() to register Tegra fuse nvmem lookups. So, this can be shared between tegra_fuse_init() and ACPI probe, which is to be introduced later.
--- drivers/soc/tegra/fuse/fuse-tegra.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-)
drivers/soc/tegra/fuse/fuse-tegra.c +23 -6
@@ -148,6 +148,24 @@ static int tegra_fuse_nvmem_register(struct tegra_fuse *fuse,return 0 ; } +static int tegra_fuse_add_lookups (struct tegra_fuse *fuse) +{ +size_t size; + +if (!fuse->soc->lookups) +return 0 ; + + size =sizeof (*fuse->lookups) * fuse->soc->num_lookups; + + fuse->lookups =kmemdup (fuse->soc->lookups, size,GFP_KERNEL ); +if (!fuse->lookups) +return -ENOMEM ; + +nvmem_add_cell_lookups (fuse->lookups, fuse->soc->num_lookups); + +return 0 ; +} +static int tegra_fuse_probe (struct platform_device *pdev) {void __iomem *base = fuse->base;
@@ -419,6 +437,7 @@ static int __init tegra_init_fuse(void)const struct of_device_id *match;struct device_node *np;struct resource regs; +int err;tegra_init_apbmisc ();
@@ -516,12 +535,10 @@ static int __init tegra_init_fuse(void)pr_debug ("Tegra CPU Speedo ID %d, SoC Speedo ID %d\n" , tegra_sku_info.cpu_speedo_id, tegra_sku_info.soc_speedo_id); -if (fuse->soc->lookups) { -size_t size =sizeof (*fuse->lookups) * fuse->soc->num_lookups; - - fuse->lookups =kmemdup (fuse->soc->lookups, size,GFP_KERNEL ); -if (fuse->lookups) -nvmem_add_cell_lookups (fuse->lookups, fuse->soc->num_lookups); + err =tegra_fuse_add_lookups (fuse); +if (err) { +pr_err ("failed to add FUSE lookups\n" ); +return err; }return 0 ;
Signature · 1 line
2.34.1
Re: [PATCH 3/6] soc/tegra: fuse: Add function to add lookups
Quoted 3 lines · Kartik
Add helper function
tegra_fuse_add_lookups()to register Tegra fuse nvmem lookups. So, this can be shared betweentegra_fuse_init()and ACPI probe, which is to be introduced later.
...
drivers/soc/tegra/fuse/fuse-tegra.c static int tegra_fuse_nvmem_register(struct tegra_fuse *fuse, · line 158
Quoted 1 line
drivers/soc/tegra/fuse/fuse-tegra.c +1
-0+ size =sizeof (*fuse->lookups) * fuse->soc->num_lookups;
At least this should use size_mul().
drivers/soc/tegra/fuse/fuse-tegra.c static int tegra_fuse_nvmem_register(struct tegra_fuse *fuse, · line 162
Quoted 3 lines
drivers/soc/tegra/fuse/fuse-tegra.c +3
-0+ fuse->lookups =kmemdup (fuse->soc->lookups, size,GFP_KERNEL ); +if (!fuse->lookups) +return -ENOMEM ;
But ideally you need to add a patch that brings kmemdup_array().
Okay, it seems it's in the original code :-(
Can you add in your ToDo list to amend this?
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH 3/6] soc/tegra: fuse: Add function to add lookups
Quoted 11 lines · Andy Shevchenko
Quoted 3 lines · Kartik
Add helper function
tegra_fuse_add_lookups()to register Tegra fuse nvmem lookups. So, this can be shared betweentegra_fuse_init()and ACPI probe, which is to be introduced later....
drivers/soc/tegra/fuse/fuse-tegra.c static int tegra_fuse_nvmem_register(struct tegra_fuse *fuse, · line 158
Quoted 1 line
drivers/soc/tegra/fuse/fuse-tegra.c +1
-0+ size =sizeof (*fuse->lookups) * fuse->soc->num_lookups;At least this should use
size_mul().
Quoted 12 lines
drivers/soc/tegra/fuse/fuse-tegra.c static int tegra_fuse_nvmem_register(struct tegra_fuse *fuse, · line 162
Quoted 3 lines
drivers/soc/tegra/fuse/fuse-tegra.c +3
-0+ fuse->lookups =kmemdup (fuse->soc->lookups, size,GFP_KERNEL ); +if (!fuse->lookups) +return -ENOMEM ;But ideally you need to add a patch that brings
kmemdup_array().Okay, it seems it's in the original code :-(
Can you add in your ToDo list to amend this?Signature · 2 lines
With Best Regards, Andy Shevchenko
I will update this in the next patch.
Regards,
Kartik
PATCH 4/6 soc/tegra: fuse: Add function to print SKU info
In reply to KartikAdd helper function tegra_fuse_pr_sku_info() to print Tegra SKU information. So, it can be shared between tegra_fuse_init() and ACPI probe which is to be introduced later.
--- drivers/soc/tegra/fuse/fuse-tegra.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
drivers/soc/tegra/fuse/fuse-tegra.c +11 -6
@@ -166,6 +166,16 @@ static int tegra_fuse_add_lookups(struct tegra_fuse *fuse)return 0 ; } +static void tegra_fuse_pr_sku_info (struct tegra_sku_info *tegra_sku_info) +{ +pr_info ("Tegra Revision: %s SKU: %d CPU Process: %d SoC Process: %d\n" , + tegra_revision_name[tegra_sku_info->revision], + tegra_sku_info->sku_id, tegra_sku_info->cpu_process_id, + tegra_sku_info->soc_process_id); +pr_debug ("Tegra CPU Speedo ID %d, SoC Speedo ID %d\n" , + tegra_sku_info->cpu_speedo_id, tegra_sku_info->soc_speedo_id); +} +static int tegra_fuse_probe (struct platform_device *pdev) {void __iomem *base = fuse->base;
@@ -528,12 +538,7 @@ static int __init tegra_init_fuse(void) fuse->soc->init (fuse); -pr_info ("Tegra Revision: %s SKU: %d CPU Process: %d SoC Process: %d\n" , - tegra_revision_name[tegra_sku_info.revision], - tegra_sku_info.sku_id, tegra_sku_info.cpu_process_id, - tegra_sku_info.soc_process_id); -pr_debug ("Tegra CPU Speedo ID %d, SoC Speedo ID %d\n" , - tegra_sku_info.cpu_speedo_id, tegra_sku_info.soc_speedo_id); +tegra_fuse_pr_sku_info (&tegra_sku_info); err =tegra_fuse_add_lookups (fuse);if (err) {
Signature · 1 line
2.34.1
Re: [PATCH 4/6] soc/tegra: fuse: Add function to print SKU info
Quoted 1 line · Kartik
Add helper function
tegra_fuse_pr_sku_info()to print Tegra SKU
Nit: I'd prefer tegra_fuse_print_sku_info(). This is already quite long, so the extra 3 characters aren't going to make things a lot worse, but they improve readability quite a bit.
Thierry
PATCH 5/6 soc/tegra: fuse: Add ACPI support for Tegra194 and Tegra234
In reply to KartikAdd tegra_fuse_acpi_probe() to initialize Tegra fuse while using ACPI. Also, drop '__init' keyword for tegra_soc_device_register() as this is also used by tegra_fuse_acpi_probe().
Note that as ACPI subsystem initialize at subsys init, function tegra_fuse_acpi_probe() also contains the necessary initialization that we are currently doing for device-tree boot as a part of early init.
--- drivers/soc/tegra/fuse/fuse-tegra.c | 67 ++++++++++++++++++++++++++++- 1 file changed, 65 insertions(+), 2 deletions(-)
drivers/soc/tegra/fuse/fuse-tegra.c +65 -2
@@ -3,6 +3,7 @@* Copyright (c) 2013-2023, NVIDIA CORPORATION. All rights reserved. */ +#include <linux/acpi.h> #include <linux/clk.h> #include <linux/device.h> #include <linux/kobject.h>
@@ -94,6 +95,13 @@ static const struct of_device_id tegra_fuse_match[] = { {/* sentinel */ } }; +static const struct acpi_device_id tegra_fuse_acpi_match[] = { + { + .id ="NVDA200F" , + }, + {/* sentinel */ }, +}; +static int tegra_fuse_read (void *priv,unsigned int offset,void *value,size_t bytes) {
@@ -176,12 +184,65 @@ static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) tegra_sku_info->cpu_speedo_id, tegra_sku_info->soc_speedo_id); } +static int tegra_fuse_acpi_probe (struct platform_device *pdev) +{ +struct resource *res; +u8 chip; +int err; + +tegra_acpi_init_apbmisc (); + + chip =tegra_get_chip_id (); +switch (chip) { +#if defined(CONFIG_ARCH_TEGRA_194_SOC ) +case TEGRA194 : + fuse->soc = &tegra194_fuse_soc; +break ; +#endif +#if defined(CONFIG_ARCH_TEGRA_234_SOC ) +case TEGRA234 : + fuse->soc = &tegra234_fuse_soc; +break ; +#endif +default : +dev_err (&pdev->dev,"Unsupported SoC: %02x\n" , chip); +return -EINVAL ; + } + + fuse->base =devm_platform_get_and_ioremap_resource (pdev,0 , &res); +if (IS_ERR (fuse->base)) +return PTR_ERR (fuse->base); + fuse->phys = res->start; + +platform_set_drvdata (pdev, fuse); + fuse->dev = &pdev->dev; + + err =tegra_fuse_nvmem_register (fuse, &pdev->dev); +if (err) +return err; + + fuse->soc->init (fuse); +tegra_soc_device_register (); +tegra_fuse_pr_sku_info (&tegra_sku_info); + + err =tegra_fuse_add_lookups (fuse); +if (err) { +dev_err (&pdev->dev,"failed to add FUSE lookups\n" ); +return err; + } + +return 0 ; +} +static int tegra_fuse_probe (struct platform_device *pdev) {void __iomem *base = fuse->base;struct resource *res;int err; +if (has_acpi_companion (&pdev->dev)) +return tegra_fuse_acpi_probe (pdev); + err =devm_add_action (&pdev->dev, tegra_fuse_restore, (void __force *)base);if (err)return err;
@@ -306,6 +367,7 @@ static struct platform_driver tegra_fuse_driver = { .driver = { .name = "tegra-fuse", .of_match_table = tegra_fuse_match, + .acpi_match_table = tegra_fuse_acpi_match, .pm = &tegra_fuse_pm, .suppress_bind_attrs = true, },
@@ -327,7 +389,8 @@ u32 __init tegra_fuse_read_early(unsigned int offset)int tegra_fuse_readl (unsigned long offset,u32 *value) { -if (!fuse->read || !fuse->clk) +/* fuse->clk is not required when ACPI is used. */ +if (!fuse->read || (!fuse->clk && !has_acpi_companion (fuse->dev)))return -EPROBE_DEFER ;if (IS_ERR (fuse->clk))
@@ -410,7 +473,7 @@ const struct attribute_group tegra194_soc_attr_group = { };#endif -struct device *__init tegra_soc_device_register (void ) +struct device *tegra_soc_device_register (void ) {struct soc_device_attribute *attr;struct soc_device *dev;
Signature · 1 line
2.34.1
Re: [PATCH 5/6] soc/tegra: fuse: Add ACPI support for Tegra194 and Tegra234
Quoted 8 lines · Kartik
Add
tegra_fuse_acpi_probe()to initialize Tegra fuse while using ACPI. Also, drop '__init' keyword fortegra_soc_device_register()as this is also used bytegra_fuse_acpi_probe().Note that as ACPI subsystem initialize at subsys init, function
tegra_fuse_acpi_probe()also contains the necessary initialization that we are currently doing for device-tree boot as a part of early init.
...
Quoted 1 line
+#include <
linux/acpi.h>
You meed mod_devicetable.h and possibly property.h, not this header (see below).
...
drivers/soc/tegra/fuse/fuse-tegra.c static const struct of_device_id tegra_fuse_match[] = { · line 101
Quoted 4 lines
drivers/soc/tegra/fuse/fuse-tegra.c +4
-0+static const struct acpi_device_id tegra_fuse_acpi_match[] = { + { + .id ="NVDA200F" , + },
Single line, no inner comma.
drivers/soc/tegra/fuse/fuse-tegra.c static const struct of_device_id tegra_fuse_match[] = { · line 102
Quoted 1 line
drivers/soc/tegra/fuse/fuse-tegra.c +1
-0+ { /* sentinel */ },
The idea of sentinel is to guard, the trailing comma ruins this contract.
Quoted 1 line
+};
...
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) · line 188
Quoted 2 lines
drivers/soc/tegra/fuse/fuse-tegra.c +2
-0+static int tegra_fuse_acpi_probe (struct platform_device *pdev) +{
Why you need a separate function?
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) · line 197
Quoted 9 lines
drivers/soc/tegra/fuse/fuse-tegra.c +9
-0+struct resource *res; +u8 chip; +int err; + +tegra_acpi_init_apbmisc (); + + chip =tegra_get_chip_id (); +switch (chip) { +#if defined(CONFIG_ARCH_TEGRA_194_SOC )
Can we avoid ugly ifdeffery?
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) · line 202
Quoted 5 lines
drivers/soc/tegra/fuse/fuse-tegra.c +5
-0+case TEGRA194 : + fuse->soc = &tegra194_fuse_soc; +break ; +#endif +#if defined(CONFIG_ARCH_TEGRA_234_SOC )
Ditto.
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) · line 209
Quoted 7 lines
drivers/soc/tegra/fuse/fuse-tegra.c +7
-0+case TEGRA234 : + fuse->soc = &tegra234_fuse_soc; +break ; +#endif +default : +dev_err (&pdev->dev,"Unsupported SoC: %02x\n" , chip); +return -EINVAL ;
return dev_err_probe(...);
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info)
Quoted 8 lines
drivers/soc/tegra/fuse/fuse-tegra.c +7
-0+ } + + fuse->base =devm_platform_get_and_ioremap_resource (pdev,0 , &res); +if (IS_ERR (fuse->base)) +return PTR_ERR (fuse->base); + fuse->phys = res->start; +platform_set_drvdata (pdev, fuse);
Is it being used?
Quoted 5 lines
drivers/soc/tegra/fuse/fuse-tegra.c +5
-0+ fuse->dev = &pdev->dev; + + err =tegra_fuse_nvmem_register (fuse, &pdev->dev); +if (err) +return err;
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info)
Quoted 10 lines
drivers/soc/tegra/fuse/fuse-tegra.c +9
-0+ + fuse->soc->init (fuse); +tegra_soc_device_register (); +tegra_fuse_pr_sku_info (&tegra_sku_info); + + err =tegra_fuse_add_lookups (fuse); +if (err) { +dev_err (&pdev->dev,"failed to add FUSE lookups\n" ); +return err;
return dev_err_probe(...);
Quoted 4 lines
drivers/soc/tegra/fuse/fuse-tegra.c +4
-0+ } + +return 0 ; +}
...
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) · line 244
Quoted 2 lines
drivers/soc/tegra/fuse/fuse-tegra.c +2
-0+if (has_acpi_companion (&pdev->dev)) +return tegra_fuse_acpi_probe (pdev);
Why is the ACPI so special here? Why you can't go same flow?
...
drivers/soc/tegra/fuse/fuse-tegra.c u32 __init tegra_fuse_read_early(unsigned int offset) · line 393
Quoted 2 lines
drivers/soc/tegra/fuse/fuse-tegra.c +2
-0+/* fuse->clk is not required when ACPI is used. */ +if (!fuse->read || (!fuse->clk && !has_acpi_companion (fuse->dev)))
No, just make CLK optional and that's it.
Quoted 1 line
return -EPROBE_DEFER;
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH 5/6] soc/tegra: fuse: Add ACPI support for Tegra194 and Tegra234
Quoted 17 lines · Andy Shevchenko
Quoted 8 lines · Kartik
Add
tegra_fuse_acpi_probe()to initialize Tegra fuse while using ACPI. Also, drop '__init' keyword fortegra_soc_device_register()as this is also used bytegra_fuse_acpi_probe().Note that as ACPI subsystem initialize at subsys init, function
tegra_fuse_acpi_probe()also contains the necessary initialization that we are currently doing for device-tree boot as a part of early init....
Quoted 1 line
+#include <
linux/acpi.h>You meed
mod_devicetable.hand possiblyproperty.h, not this header (see below).
Quoted 8 lines
...
drivers/soc/tegra/fuse/fuse-tegra.c static const struct of_device_id tegra_fuse_match[] = { · line 101
Quoted 4 lines
drivers/soc/tegra/fuse/fuse-tegra.c +4
-0+static const struct acpi_device_id tegra_fuse_acpi_match[] = { + { + .id ="NVDA200F" , + },Single line, no inner comma.
ACK.
Quoted 6 lines
drivers/soc/tegra/fuse/fuse-tegra.c static const struct of_device_id tegra_fuse_match[] = { · line 102
Quoted 2 lines
drivers/soc/tegra/fuse/fuse-tegra.c +1
-0+ { /* sentinel */ },The idea of sentinel is to guard, the trailing comma ruins this contract.
Quoted 1 line
+};
ACK.
Quoted 8 lines
...
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) · line 188
Quoted 2 lines
drivers/soc/tegra/fuse/fuse-tegra.c +2
-0+static int tegra_fuse_acpi_probe (struct platform_device *pdev) +{Why you need a separate function?
Quoted 12 lines
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) · line 197
Quoted 9 lines
drivers/soc/tegra/fuse/fuse-tegra.c +9
-0+struct resource *res; +u8 chip; +int err; + +tegra_acpi_init_apbmisc (); + + chip =tegra_get_chip_id (); +switch (chip) { +#if defined(CONFIG_ARCH_TEGRA_194_SOC )Can we avoid ugly ifdeffery?
No, the SoC data is defined only when the SoC specific config is enabled. So, guarding these with ifdef's is required here.
Quoted 8 lines
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) · line 202
Quoted 5 lines
drivers/soc/tegra/fuse/fuse-tegra.c +5
-0+case TEGRA194 : + fuse->soc = &tegra194_fuse_soc; +break ; +#endif +#if defined(CONFIG_ARCH_TEGRA_234_SOC )Ditto.
Quoted 10 lines
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) · line 209
Quoted 7 lines
drivers/soc/tegra/fuse/fuse-tegra.c +7
-0+case TEGRA234 : + fuse->soc = &tegra234_fuse_soc; +break ; +#endif +default : +dev_err (&pdev->dev,"Unsupported SoC: %02x\n" , chip); +return -EINVAL ;return dev_err_probe(...);
ACK.
Quoted 11 lines
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info)
Quoted 8 lines
drivers/soc/tegra/fuse/fuse-tegra.c +7
-0+ } + + fuse->base =devm_platform_get_and_ioremap_resource (pdev,0 , &res); +if (IS_ERR (fuse->base)) +return PTR_ERR (fuse->base); + fuse->phys = res->start; +platform_set_drvdata (pdev, fuse);Is it being used?
Looks like this is not being used.
Quoted 25 lines
Quoted 5 lines
drivers/soc/tegra/fuse/fuse-tegra.c +5
-0+ fuse->dev = &pdev->dev; + + err =tegra_fuse_nvmem_register (fuse, &pdev->dev); +if (err) +return err;drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info)
Quoted 10 lines
drivers/soc/tegra/fuse/fuse-tegra.c +9
-0+ + fuse->soc->init (fuse); +tegra_soc_device_register (); +tegra_fuse_pr_sku_info (&tegra_sku_info); + + err =tegra_fuse_add_lookups (fuse); +if (err) { +dev_err (&pdev->dev,"failed to add FUSE lookups\n" ); +return err;return dev_err_probe(...);Quoted 4 lines
drivers/soc/tegra/fuse/fuse-tegra.c +4
-0+ } + +return 0 ; +}...
Quoted 7 lines
drivers/soc/tegra/fuse/fuse-tegra.c static void tegra_fuse_pr_sku_info(struct tegra_sku_info *tegra_sku_info) · line 244
Quoted 2 lines
drivers/soc/tegra/fuse/fuse-tegra.c +2
-0+if (has_acpi_companion (&pdev->dev)) +return tegra_fuse_acpi_probe (pdev);Why is the ACPI so special here? Why you can't go same flow?
...
We need to initialize the soc data before we continue the probe. I guess we can have a conditional here for this initialization. and re-use the same function. I will update this in the next patch.
Quoted 8 lines
drivers/soc/tegra/fuse/fuse-tegra.c u32 __init tegra_fuse_read_early(unsigned int offset) · line 393
Quoted 2 lines
drivers/soc/tegra/fuse/fuse-tegra.c +2
-0+/* fuse->clk is not required when ACPI is used. */ +if (!fuse->read || (!fuse->clk && !has_acpi_companion (fuse->dev)))No, just make CLK optional and that's it.
Quoted 1 line
return -EPROBE_DEFER;
If the Fuse driver is probed using device-tree. Then we need to make sure that fuse->clk has been initilaized.
Quoted 2 lines
With Best Regards,
Andy Shevchenko
Regards,
Kartik
Re: [PATCH 5/6] soc/tegra: fuse: Add ACPI support for Tegra194 and Tegra234
Quoted 2 lines · Kartik
Quoted 1 line · Andy Shevchenko
On Fri, Aug 18, 2023 at 03:00:27PM +0530, Kartik wrote:
...
Quoted 9 lines
Quoted 7 lines
drivers/soc/tegra/fuse/fuse-tegra.c u32 __init tegra_fuse_read_early(unsigned int offset) · line 393
Quoted 2 lines
drivers/soc/tegra/fuse/fuse-tegra.c +2
-0+/* fuse->clk is not required when ACPI is used. */ +if (!fuse->read || (!fuse->clk && !has_acpi_companion (fuse->dev)))No, just make CLK optional and that's it.
Quoted 1 line
return -EPROBE_DEFER;
If the Fuse driver is probed using device-tree. Then we need to make sure that
fuse->clkhas been initilaized.
So, I recommend to think about it more, maybe you can find better solution than above.
And actually don't use has_acpi_companion() in this case. What you need is is_acpi_node() or is_of_node() depending on the case you want to check for.
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH 6/6 soc/tegra: fuse: Add support for Tegra241
In reply to KartikAdd support for Tegra241 which use ACPI boot.
--- drivers/soc/tegra/Kconfig | 5 +++++ drivers/soc/tegra/fuse/fuse-tegra.c | 5 +++++ drivers/soc/tegra/fuse/fuse-tegra30.c | 25 +++++++++++++++++++++++++ drivers/soc/tegra/fuse/fuse.h | 4 ++++ drivers/soc/tegra/fuse/tegra-apbmisc.c | 1 + include/soc/tegra/fuse.h | 1 + 6 files changed, 41 insertions(+)
drivers/soc/tegra/Kconfig +5 -0
@@ -133,6 +133,11 @@ config ARCH_TEGRA_234_SOC help Enable support for the NVIDIA Tegra234 SoC. +config ARCH_TEGRA_241_SOC + bool "NVIDIA Tegra241 SoC" + help + Enable support for the NVIDIA Tegra241 SoC. + endif endif
drivers/soc/tegra/fuse/fuse-tegra.c +5 -0
@@ -203,6 +203,11 @@ static int tegra_fuse_acpi_probe(struct platform_device *pdev)case TEGRA234 : fuse->soc = &tegra234_fuse_soc;break ; +#endif +#if defined(CONFIG_ARCH_TEGRA_241_SOC ) +case TEGRA241 : + fuse->soc = &tegra241_fuse_soc; +break ;#endif default :dev_err (&pdev->dev,"Unsupported SoC: %02x\n" , chip);
drivers/soc/tegra/fuse/fuse-tegra30.c +25 -0
@@ -678,3 +678,28 @@ const struct tegra_fuse_soc tegra234_fuse_soc = { .clk_suspend_on = false, };#endif + +#if defined(CONFIG_ARCH_TEGRA_241_SOC ) +static const struct tegra_fuse_info tegra241_fuse_info = { + .read = tegra30_fuse_read, + .size =0x16008 , + .spare =0xcf0 , +}; + +static const struct nvmem_keepout tegra241_fuse_keepouts[] = { + { .start =0xc , .end =0x1600c } +}; + +const struct tegra_fuse_soc tegra241_fuse_soc = { + .init = tegra30_fuse_init, + .info = &tegra241_fuse_info, + .lookups =NULL , + .num_lookups =0 , + .cells =NULL , + .num_cells =0 , + .keepouts = tegra241_fuse_keepouts, + .num_keepouts =ARRAY_SIZE (tegra241_fuse_keepouts), + .soc_attr_group = &tegra194_soc_attr_group, + .clk_suspend_on = false, +}; +#endif
drivers/soc/tegra/fuse/fuse.h +4 -0
@@ -136,4 +136,8 @@ extern const struct tegra_fuse_soc tegra194_fuse_soc;extern const struct tegra_fuse_soc tegra234_fuse_soc;#endif +#ifdef CONFIG_ARCH_TEGRA_241_SOC +extern const struct tegra_fuse_soc tegra241_fuse_soc; +#endif +#endif
drivers/soc/tegra/fuse/tegra-apbmisc.c +1 -0
@@ -63,6 +63,7 @@ bool tegra_is_silicon(void)switch (tegra_get_chip_id ()) {case TEGRA194 :case TEGRA234 : +case TEGRA241 :case TEGRA264 :if (tegra_get_platform () ==0 )return true;
include/soc/tegra/fuse.h +1 -0
@@ -17,6 +17,7 @@#define TEGRA186 0x18#define TEGRA194 0x19#define TEGRA234 0x23 +#define TEGRA241 0x24#define TEGRA264 0x26#define TEGRA_FUSE_SKU_CALIB_0 0xf0
Signature · 1 line
2.34.1
Re: [PATCH 6/6] soc/tegra: fuse: Add support for Tegra241
Quoted 1 line · Kartik
Add support for Tegra241 which use ACPI boot.
...
drivers/soc/tegra/fuse/fuse-tegra.c static int tegra_fuse_acpi_probe(struct platform_device *pdev) · line 211
Quoted 9 lines
drivers/soc/tegra/fuse/fuse-tegra.c +5
-0case TEGRA234 : fuse->soc = &tegra234_fuse_soc;break ; +#endif +#if defined(CONFIG_ARCH_TEGRA_241_SOC ) +case TEGRA241 : + fuse->soc = &tegra241_fuse_soc; +break ;#endif
Have you tried --patience when formatting patches? Does it help them to look better?
...
drivers/soc/tegra/fuse/fuse-tegra30.c const struct tegra_fuse_soc tegra234_fuse_soc = { · line 699
Quoted 8 lines
drivers/soc/tegra/fuse/fuse-tegra30.c +7
-0+const struct tegra_fuse_soc tegra241_fuse_soc = { + .init = tegra30_fuse_init, + .info = &tegra241_fuse_info, + .lookups =NULL , + .num_lookups =0 , + .cells =NULL , + .num_cells =0 ,
Isn't it the default?
drivers/soc/tegra/fuse/fuse-tegra30.c const struct tegra_fuse_soc tegra234_fuse_soc = { · line 703
Quoted 5 lines
drivers/soc/tegra/fuse/fuse-tegra30.c +4
-0+ .keepouts = tegra241_fuse_keepouts, + .num_keepouts = ARRAY_SIZE(tegra241_fuse_keepouts), + .soc_attr_group = &tegra194_soc_attr_group, + .clk_suspend_on = false,
Ditto.
Quoted 1 line
+};
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH 6/6] soc/tegra: fuse: Add support for Tegra241
Quoted 5 lines · Andy Shevchenko
Quoted 1 line · Kartik
Add support for Tegra241 which use ACPI boot.
...
Quoted 13 lines
drivers/soc/tegra/fuse/fuse-tegra.c static int tegra_fuse_acpi_probe(struct platform_device *pdev) · line 211
Quoted 9 lines
drivers/soc/tegra/fuse/fuse-tegra.c +5
-0case TEGRA234 : fuse->soc = &tegra234_fuse_soc;break ; +#endif +#if defined(CONFIG_ARCH_TEGRA_241_SOC ) +case TEGRA241 : + fuse->soc = &tegra241_fuse_soc; +break ;#endif Have you tried --patience when formatting patches? Does it help them to look better?
No, I did not use --patience flag while formatting the patches. Shall I post the next patch set using it?
Quoted 13 lines
...
drivers/soc/tegra/fuse/fuse-tegra30.c const struct tegra_fuse_soc tegra234_fuse_soc = { · line 699
Quoted 8 lines
drivers/soc/tegra/fuse/fuse-tegra30.c +7
-0+const struct tegra_fuse_soc tegra241_fuse_soc = { + .init = tegra30_fuse_init, + .info = &tegra241_fuse_info, + .lookups =NULL , + .num_lookups =0 , + .cells =NULL , + .num_cells =0 ,Isn't it the default?
Quoted 8 lines
drivers/soc/tegra/fuse/fuse-tegra30.c const struct tegra_fuse_soc tegra234_fuse_soc = { · line 703
Quoted 5 lines
drivers/soc/tegra/fuse/fuse-tegra30.c +4
-0+ .keepouts = tegra241_fuse_keepouts, + .num_keepouts = ARRAY_SIZE(tegra241_fuse_keepouts), + .soc_attr_group = &tegra194_soc_attr_group, + .clk_suspend_on = false,Ditto.
Yes, I will trim this list in the next patch.
Quoted 1 line
Quoted 1 line
+};
Regards,
Kartik
Re: [PATCH 6/6] soc/tegra: fuse: Add support for Tegra241
Quoted 2 lines · Kartik
Quoted 1 line · Andy Shevchenko
On Fri, Aug 18, 2023 at 03:00:28PM +0530, Kartik wrote:
...
Quoted 13 lines
Quoted 4 lines
Quoted 4 lines
drivers/soc/tegra/fuse/fuse-tegra.c +1
-0case TEGRA234 : fuse->soc = &tegra234_fuse_soc;break ; +#endif Quoted 8 lines
drivers/soc/tegra/fuse/fuse-tegra.c static int tegra_fuse_acpi_probe(struct platform_device *pdev) · line 211
Quoted 5 lines
drivers/soc/tegra/fuse/fuse-tegra.c +4
-0+#if defined(CONFIG_ARCH_TEGRA_241_SOC ) +case TEGRA241 : + fuse->soc = &tegra241_fuse_soc; +break ;#endif Have you tried --patience when formatting patches? Does it help them to look better?
Quoted 2 lines
No, I did not use --patience flag while formatting the patches. Shall I post the next patch set using it?
Do you see the difference in the output? If yes, definitely use it. Otherwise it's recommended to use anyway.
Signature · 2 lines
With Best Regards, Andy Shevchenko