Skip to contentSkip to conversation

perf sampling count/freq/period strange bahavior

DISCUSSION Michael Petlan 3 participants 3 messages Oct 19, 2023 – Oct 20, 2023

lore
Share & tools
lore
#0 lore raw

Hello all...

We have encountered a strange behavior related to sampling. Generally said, the number of samples is usually much lower than it should be.

Let's say, for load L, perf stat -e instructions -- L shows around 250,000 event hits. If I understand the concept of -c option for perf record, with -c 250 it should make the counter overflow and generate a sample for every 250th event hit, so, it should result into ~1000 samples.

Instead I am getting something like ~62-150 samples, for example 124. I have checked in dmesg that kernel has not throttled anything. When running perf report --stdio, I see in the header that there were 0 samples lost (so the buffer was consumed fast enough). Additionally, perf report --stdio tries to estimate the actual event count:

Event count (approx.): 31000

(Which is because 250 * 124 = 31000, so perf itself considers this formula (n_of_samples * sampling_rate = n_of_events) valid.)

But in reality, this is not the case, perf stat, as said, never shows that low number of events for the same load.

What else is involved in the sampling rates and why the number of samples is so much lower than it should be?

Thank you for ideas!

Michael

#1 lore raw

Hello,

Quoted 23 lines · Michael Petlan

Hello all...

We have encountered a strange behavior related to sampling. Generally said, the number of samples is usually much lower than it should be.

Let's say, for load L, perf stat -e instructions -- L shows around 250,000 event hits. If I understand the concept of -c option for perf record, with -c 250 it should make the counter overflow and generate a sample for every 250th event hit, so, it should result into ~1000 samples.

Instead I am getting something like ~62-150 samples, for example 124. I have checked in dmesg that kernel has not throttled anything. When running perf report --stdio, I see in the header that there were 0 samples lost (so the buffer was consumed fast enough). Additionally, perf report --stdio tries to estimate the actual event count:

Event count (approx.): 31000

(Which is because 250 * 124 = 31000, so perf itself considers this formula (n_of_samples * sampling_rate = n_of_events) valid.)

Quoted 7 lines

But in reality, this is not the case, perf stat, as said, never shows that low number of events for the same load.

What else is involved in the sampling rates and why the number of samples is so much lower than it should be?

Thank you for ideas!

I don't know but it seems PMU has some internal limit on the period and ignores lower values.

On my Intel machine,

$ perf stat -e instructions:u true

Performance counter stats for 'true':

           120,024      instructions:u

       0.002002822 seconds time elapsed

       0.002040000 seconds user
       0.000000000 seconds sys
$ perf record -e instructions:u -c 10000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (12 samples) ]
$ perf record -e instructions:u -c 5000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (24 samples) ]
$ perf record -e instructions:u -c 4000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (30 samples) ]
$ perf record -e instructions:u -c 3000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (40 samples) ]
$ perf record -e instructions:u -c 2000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (51 samples) ]
$ perf record -e instructions:u -c 1000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (51 samples) ]
$ perf record -e instructions:u -c 500 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (51 samples) ]
#2 lore raw

Em Thu, Oct 19, 2023 at 11:33:19PM -0700, Namhyung Kim escreveu:

Quoted 71 lines

Hello,

Quoted 23 lines · Michael Petlan

Hello all...

We have encountered a strange behavior related to sampling. Generally said, the number of samples is usually much lower than it should be.

Let's say, for load L, perf stat -e instructions -- L shows around 250,000 event hits. If I understand the concept of -c option for perf record, with -c 250 it should make the counter overflow and generate a sample for every 250th event hit, so, it should result into ~1000 samples.

Instead I am getting something like ~62-150 samples, for example 124. I have checked in dmesg that kernel has not throttled anything. When running perf report --stdio, I see in the header that there were 0 samples lost (so the buffer was consumed fast enough). Additionally, perf report --stdio tries to estimate the actual event count:

Event count (approx.): 31000

(Which is because 250 * 124 = 31000, so perf itself considers this formula (n_of_samples * sampling_rate = n_of_events) valid.)

Quoted 7 lines

But in reality, this is not the case, perf stat, as said, never shows that low number of events for the same load.

What else is involved in the sampling rates and why the number of samples is so much lower than it should be?

Thank you for ideas!

I don't know but it seems PMU has some internal limit on the period and ignores lower values.

On my Intel machine,

$ perf stat -e instructions:u true

Performance counter stats for 'true':

           120,024      instructions:u

       0.002002822 seconds time elapsed

       0.002040000 seconds user
       0.000000000 seconds sys
$ perf record -e instructions:u -c 10000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (12 samples) ]
$ perf record -e instructions:u -c 5000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (24 samples) ]
$ perf record -e instructions:u -c 4000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (30 samples) ]
$ perf record -e instructions:u -c 3000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (40 samples) ]
$ perf record -e instructions:u -c 2000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (51 samples) ]
Quoted 7 lines
$ perf record -e instructions:u -c 1000 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (51 samples) ]
$ perf record -e instructions:u -c 500 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (51 samples) ]

Same thing here, see below.

But if you ask for a small period you'll miss lots of events, right? The events that take place while you're processing the bigger number of perf interrupts.

Like lets get an interrupt per instruction: :-)

[root@five ~]# perf record -c 1 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.075 MB perf.data (1687 samples) ] [root@five ~]#

[root@five ~]# perf stat -r5 -e instructions stress-ng --quiet --cpu 1 -t 2

Performance counter stats for 'stress-ng --quiet --cpu 1 -t 2' (5 runs):

    17,313,307,689      instructions             ( +-  0.17% )

          2.023840 +- 0.000939 seconds time elapsed  ( +-  0.05% )

[root@five ~]# perf record -c 1000000 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.548 MB perf.data (17228 samples) ] [root@five ~]# perf record -c 1000000 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.530 MB perf.data (16627 samples) ] [root@five ~]# perf record -c 1000000 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.549 MB perf.data (17264 samples) ] [root@five ~]# perf record -c 2000000 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.292 MB perf.data (8839 samples) ] [root@five ~]# perf record -c 2000000 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.284 MB perf.data (8590 samples) ] [root@five ~]# perf record -c 2000000 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.288 MB perf.data (8694 samples) ] [root@five ~]# perf record -c 4000000 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.154 MB perf.data (4313 samples) ] [root@five ~]# perf record -c 4000000 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.154 MB perf.data (4319 samples) ] [root@five ~]# perf record -c 4000000 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.154 MB perf.data (4312 samples) ] [root@five ~]# perf record -c 1000 -e instructions stress-ng --quiet --cpu 1 -t 2 [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.090 MB perf.data (2156 samples) ] [root@five ~]#