Skip to contentSkip to conversation

WARNING around serdev/bt/btnxpuart with 6.7-rc2

DISCUSSION Francesco Dolcini 3 participants 6 messages Nov 24, 2023 – Nov 27, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hello all,
while doing some test with current [1] Linux mainline I randomly hit a warning. It is not systematic and I cannot really tell when it was introduced, posting here to collect some ideas.

Amitkumar, Neeraj: to me the issue is around the bluetooth/btnxpuart driver, however I could also be plain wrong.

The issue was reproduced on a Toradex Verdin AM62 [2] that is based on a TI AM625 SOC (arm64) running with a arm64 defconfig and built with GCC 9 [3].

[    9.599027] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.962266] Bluetooth: hci0: Frame reassembly failed (-84)
[    9.972939] ------------[ cut here ]------------
[    9.977922] serial serial0: receive_buf returns -84 (count = 6)
[    9.994857] WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-ttyport.c:37 ttyport_receive_buf+0xd8/0xf8
[   10.004840] Modules linked in: mwifiex_sdio(+) mwifiex snd_soc_simple_card crct10dif_ce cfg80211 snd_soc_simple_card_utils k3_j72xx_bandgap rti_wdt rtc_ti_k3 btnxpuart bluetooth sa2ul ecdh_generic ecc sha256_generic tidss rfkill libsha256 drm_dma_helper snd_soc_davinci_mcasp authenc omap_mailbox snd_soc_ti_udma snd_soc_ti_edma snd_soc_ti_sdma atmel_mxt_ts ina2xx snd_soc_nau8822 ti_sn65dsi83 tc358768 ti_ads1015 tps65219_pwrbutton at24 m_can_platform industrialio_triggered_buffer drm_kms_helper m_can kfifo_buf rtc_ds1307 lm75 pwm_tiehrpwm can_dev spi_omap2_mcspi panel_lvds pwm_bl libcomposite fuse drm backlight ipv6
[   10.059984] CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-00147-gf1a09972a45a #1
[   10.071793] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
[   10.082898] Workqueue: events_unbound flush_to_ldisc
[   10.091345] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   10.101820] pc : ttyport_receive_buf+0xd8/0xf8
[   10.109712] lr : ttyport_receive_buf+0xd8/0xf8
[   10.117581] sp : ffff800082b9bd20
[   10.124202] x29: ffff800082b9bd20 x28: ffff00000000ee05 x27: ffff0000002f21c0
[   10.134735] x26: ffff000002931820 x25: 61c8864680b583eb x24: ffff0000002f21b8
[   10.145209] x23: ffff00000026e740 x22: ffff0000002f21e0 x21: ffffffffffffffac
[   10.155686] x20: ffff000000da5c00 x19: 0000000000000006 x18: 0000000000000000
[   10.166178] x17: ffff7fffbe0e7000 x16: ffff800080000000 x15: 000039966db1c650
[   10.176564] x14: 000000000000022c x13: 000000000000022c x12: 0000000000000000
[   10.186979] x11: 000000000000000a x10: 0000000000000a60 x9 : ffff800082b9bb80
[   10.197352] x8 : ffff00000026f200 x7 : ffff00003fd90080 x6 : 00000000000022e5
[   10.207680] x5 : 00000000410fd030 x4 : 0000000000c0000e x3 : ffff7fffbe0e7000
[   10.218051] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000
[   10.228393] Call trace:
[   10.233989]  ttyport_receive_buf+0xd8/0xf8
[   10.241224]  flush_to_ldisc+0xbc/0x1a4
[   10.248117]  process_scheduled_works+0x16c/0x28c
[   10.255851]  worker_thread+0x16c/0x2e0
[   10.262673]  kthread+0x11c/0x128
[   10.268953]  ret_from_fork+0x10/0x20
[   10.275460] ---[ end trace 0000000000000000 ]---
[   10.294674] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.461657] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.472025] Bluetooth: hci0: Frame reassembly failed (-84)

Francesco

[1] git sha f1a09972a45a
[2] arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts
[3] aarch64-linux-gnu-gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0

#1 lore raw
Quoted 37 lines · Francesco Dolcini

Hello all,
while doing some test with current [1] Linux mainline I randomly hit a warning. It is not systematic and I cannot really tell when it was introduced, posting here to collect some ideas.

Amitkumar, Neeraj: to me the issue is around the bluetooth/btnxpuart driver, however I could also be plain wrong.

The issue was reproduced on a Toradex Verdin AM62 [2] that is based on a TI AM625 SOC (arm64) running with a arm64 defconfig and built with GCC 9 [3].

[    9.599027] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.962266] Bluetooth: hci0: Frame reassembly failed (-84)
[    9.972939] ------------[ cut here ]------------
[    9.977922] serial serial0: receive_buf returns -84 (count = 6)
[    9.994857] WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-ttyport.c:37 ttyport_receive_buf+0xd8/0xf8
[   10.004840] Modules linked in: mwifiex_sdio(+) mwifiex snd_soc_simple_card crct10dif_ce cfg80211 snd_soc_simple_card_utils k3_j72xx_bandgap rti_wdt rtc_ti_k3 btnxpuart bluetooth sa2ul ecdh_generic ecc sha256_generic tidss rfkill libsha256 drm_dma_helper snd_soc_davinci_mcasp authenc omap_mailbox snd_soc_ti_udma snd_soc_ti_edma snd_soc_ti_sdma atmel_mxt_ts ina2xx snd_soc_nau8822 ti_sn65dsi83 tc358768 ti_ads1015 tps65219_pwrbutton at24 m_can_platform industrialio_triggered_buffer drm_kms_helper m_can kfifo_buf rtc_ds1307 lm75 pwm_tiehrpwm can_dev spi_omap2_mcspi panel_lvds pwm_bl libcomposite fuse drm backlight ipv6
[   10.059984] CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-00147-gf1a09972a45a #1
[   10.071793] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
[   10.082898] Workqueue: events_unbound flush_to_ldisc
[   10.091345] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   10.101820] pc : ttyport_receive_buf+0xd8/0xf8
[   10.109712] lr : ttyport_receive_buf+0xd8/0xf8
[   10.117581] sp : ffff800082b9bd20
[   10.124202] x29: ffff800082b9bd20 x28: ffff00000000ee05 x27: ffff0000002f21c0
[   10.134735] x26: ffff000002931820 x25: 61c8864680b583eb x24: ffff0000002f21b8
[   10.145209] x23: ffff00000026e740 x22: ffff0000002f21e0 x21: ffffffffffffffac
[   10.155686] x20: ffff000000da5c00 x19: 0000000000000006 x18: 0000000000000000
[   10.166178] x17: ffff7fffbe0e7000 x16: ffff800080000000 x15: 000039966db1c650
[   10.176564] x14: 000000000000022c x13: 000000000000022c x12: 0000000000000000
[   10.186979] x11: 000000000000000a x10: 0000000000000a60 x9 : ffff800082b9bb80
[   10.197352] x8 : ffff00000026f200 x7 : ffff00003fd90080 x6 : 00000000000022e5
[   10.207680] x5 : 00000000410fd030 x4 : 0000000000c0000e x3 : ffff7fffbe0e7000
[   10.218051] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000
[   10.228393] Call trace:
[   10.233989]  ttyport_receive_buf+0xd8/0xf8
[   10.241224]  flush_to_ldisc+0xbc/0x1a4
Quoted 8 lines
[   10.248117]  process_scheduled_works+0x16c/0x28c
[   10.255851]  worker_thread+0x16c/0x2e0
[   10.262673]  kthread+0x11c/0x128
[   10.268953]  ret_from_fork+0x10/0x20
[   10.275460] ---[ end trace 0000000000000000 ]---
[   10.294674] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.461657] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.472025] Bluetooth: hci0: Frame reassembly failed (-84)

I think that what is happening is the following:

-> serdev-ttyport.c:ttyport_receive_buf()
-> btnxpuart.c:btnxpuart_receive_buf()

      -> h4_recv_buf() errors out
      -> return -84

-> warn because ret is <0

Is this the desired behavior? If I understand correct recv_buf() is supposed to return how many bytes it has consumed, e.g. something from 0 to count.

Francesco

maintainer
#2 lore raw
Quoted 49 lines · Francesco Dolcini
Quoted 37 lines · Francesco Dolcini

Hello all,
while doing some test with current [1] Linux mainline I randomly hit a warning. It is not systematic and I cannot really tell when it was introduced, posting here to collect some ideas.

Amitkumar, Neeraj: to me the issue is around the bluetooth/btnxpuart driver, however I could also be plain wrong.

The issue was reproduced on a Toradex Verdin AM62 [2] that is based on a TI AM625 SOC (arm64) running with a arm64 defconfig and built with GCC 9 [3].

[    9.599027] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.962266] Bluetooth: hci0: Frame reassembly failed (-84)
[    9.972939] ------------[ cut here ]------------
[    9.977922] serial serial0: receive_buf returns -84 (count = 6)
[    9.994857] WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-ttyport.c:37 ttyport_receive_buf+0xd8/0xf8
[   10.004840] Modules linked in: mwifiex_sdio(+) mwifiex snd_soc_simple_card crct10dif_ce cfg80211 snd_soc_simple_card_utils k3_j72xx_bandgap rti_wdt rtc_ti_k3 btnxpuart bluetooth sa2ul ecdh_generic ecc sha256_generic tidss rfkill libsha256 drm_dma_helper snd_soc_davinci_mcasp authenc omap_mailbox snd_soc_ti_udma snd_soc_ti_edma snd_soc_ti_sdma atmel_mxt_ts ina2xx snd_soc_nau8822 ti_sn65dsi83 tc358768 ti_ads1015 tps65219_pwrbutton at24 m_can_platform industrialio_triggered_buffer drm_kms_helper m_can kfifo_buf rtc_ds1307 lm75 pwm_tiehrpwm can_dev spi_omap2_mcspi panel_lvds pwm_bl libcomposite fuse drm backlight ipv6
[   10.059984] CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-00147-gf1a09972a45a #1
[   10.071793] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
[   10.082898] Workqueue: events_unbound flush_to_ldisc
[   10.091345] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   10.101820] pc : ttyport_receive_buf+0xd8/0xf8
[   10.109712] lr : ttyport_receive_buf+0xd8/0xf8
[   10.117581] sp : ffff800082b9bd20
[   10.124202] x29: ffff800082b9bd20 x28: ffff00000000ee05 x27: ffff0000002f21c0
[   10.134735] x26: ffff000002931820 x25: 61c8864680b583eb x24: ffff0000002f21b8
[   10.145209] x23: ffff00000026e740 x22: ffff0000002f21e0 x21: ffffffffffffffac
[   10.155686] x20: ffff000000da5c00 x19: 0000000000000006 x18: 0000000000000000
[   10.166178] x17: ffff7fffbe0e7000 x16: ffff800080000000 x15: 000039966db1c650
[   10.176564] x14: 000000000000022c x13: 000000000000022c x12: 0000000000000000
[   10.186979] x11: 000000000000000a x10: 0000000000000a60 x9 : ffff800082b9bb80
[   10.197352] x8 : ffff00000026f200 x7 : ffff00003fd90080 x6 : 00000000000022e5
[   10.207680] x5 : 00000000410fd030 x4 : 0000000000c0000e x3 : ffff7fffbe0e7000
[   10.218051] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000
[   10.228393] Call trace:
[   10.233989]  ttyport_receive_buf+0xd8/0xf8
[   10.241224]  flush_to_ldisc+0xbc/0x1a4
Quoted 8 lines
[   10.248117]  process_scheduled_works+0x16c/0x28c
[   10.255851]  worker_thread+0x16c/0x2e0
[   10.262673]  kthread+0x11c/0x128
[   10.268953]  ret_from_fork+0x10/0x20
[   10.275460] ---[ end trace 0000000000000000 ]---
[   10.294674] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.461657] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.472025] Bluetooth: hci0: Frame reassembly failed (-84)

I think that what is happening is the following:

Quoted 8 lines

-> serdev-ttyport.c:ttyport_receive_buf()

    -> btnxpuart.c:btnxpuart_receive_buf()
       -> h4_recv_buf() errors out
       -> return -84
    -> warn because ret is <0

Is this the desired behavior? If I understand correct recv_buf() is supposed to return how many bytes it has consumed, e.g. something from 0 to count.

You understand it correctly. serdev should adopt:
commit 0468a8071d7cfb0f5bc02b0888cec4525551299f

Author: Jiri Slaby (SUSE) <[email protected]>
Date:   Thu Aug 10 11:14:44 2023 +0200

tty: make counts in tty_port_client_operations hooks size_t

and propagate it further to its users. The commit was meant to exactly avoid these mistakes (but one layer upper).

btmtkuart_receive_buf is broken the same way.

Do you want to fix it yourself?

thanks,

Signature · 2 lines
js
suse labs
#3 lore raw
Quoted 64 lines · Jiri Slaby
Quoted 49 lines · Francesco Dolcini
Quoted 37 lines · Francesco Dolcini

Hello all,
while doing some test with current [1] Linux mainline I randomly hit a warning. It is not systematic and I cannot really tell when it was introduced, posting here to collect some ideas.

Amitkumar, Neeraj: to me the issue is around the bluetooth/btnxpuart driver, however I could also be plain wrong.

The issue was reproduced on a Toradex Verdin AM62 [2] that is based on a TI AM625 SOC (arm64) running with a arm64 defconfig and built with GCC 9 [3].

[    9.599027] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.962266] Bluetooth: hci0: Frame reassembly failed (-84)
[    9.972939] ------------[ cut here ]------------
[    9.977922] serial serial0: receive_buf returns -84 (count = 6)
[    9.994857] WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-ttyport.c:37 ttyport_receive_buf+0xd8/0xf8
[   10.004840] Modules linked in: mwifiex_sdio(+) mwifiex snd_soc_simple_card crct10dif_ce cfg80211 snd_soc_simple_card_utils k3_j72xx_bandgap rti_wdt rtc_ti_k3 btnxpuart bluetooth sa2ul ecdh_generic ecc sha256_generic tidss rfkill libsha256 drm_dma_helper snd_soc_davinci_mcasp authenc omap_mailbox snd_soc_ti_udma snd_soc_ti_edma snd_soc_ti_sdma atmel_mxt_ts ina2xx snd_soc_nau8822 ti_sn65dsi83 tc358768 ti_ads1015 tps65219_pwrbutton at24 m_can_platform industrialio_triggered_buffer drm_kms_helper m_can kfifo_buf rtc_ds1307 lm75 pwm_tiehrpwm can_dev spi_omap2_mcspi panel_lvds pwm_bl libcomposite fuse drm backlight ipv6
[   10.059984] CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-00147-gf1a09972a45a #1
[   10.071793] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
[   10.082898] Workqueue: events_unbound flush_to_ldisc
[   10.091345] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   10.101820] pc : ttyport_receive_buf+0xd8/0xf8
[   10.109712] lr : ttyport_receive_buf+0xd8/0xf8
[   10.117581] sp : ffff800082b9bd20
[   10.124202] x29: ffff800082b9bd20 x28: ffff00000000ee05 x27: ffff0000002f21c0
[   10.134735] x26: ffff000002931820 x25: 61c8864680b583eb x24: ffff0000002f21b8
[   10.145209] x23: ffff00000026e740 x22: ffff0000002f21e0 x21: ffffffffffffffac
[   10.155686] x20: ffff000000da5c00 x19: 0000000000000006 x18: 0000000000000000
[   10.166178] x17: ffff7fffbe0e7000 x16: ffff800080000000 x15: 000039966db1c650
[   10.176564] x14: 000000000000022c x13: 000000000000022c x12: 0000000000000000
[   10.186979] x11: 000000000000000a x10: 0000000000000a60 x9 : ffff800082b9bb80
[   10.197352] x8 : ffff00000026f200 x7 : ffff00003fd90080 x6 : 00000000000022e5
[   10.207680] x5 : 00000000410fd030 x4 : 0000000000c0000e x3 : ffff7fffbe0e7000
[   10.218051] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000
[   10.228393] Call trace:
[   10.233989]  ttyport_receive_buf+0xd8/0xf8
[   10.241224]  flush_to_ldisc+0xbc/0x1a4
Quoted 8 lines
[   10.248117]  process_scheduled_works+0x16c/0x28c
[   10.255851]  worker_thread+0x16c/0x2e0
[   10.262673]  kthread+0x11c/0x128
[   10.268953]  ret_from_fork+0x10/0x20
[   10.275460] ---[ end trace 0000000000000000 ]---
[   10.294674] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.461657] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.472025] Bluetooth: hci0: Frame reassembly failed (-84)

I think that what is happening is the following:

Quoted 8 lines

-> serdev-ttyport.c:ttyport_receive_buf()

    -> btnxpuart.c:btnxpuart_receive_buf()
       -> h4_recv_buf() errors out
       -> return -84
    -> warn because ret is <0

Is this the desired behavior? If I understand correct recv_buf() is supposed to return how many bytes it has consumed, e.g. something from 0 to count.

You understand it correctly. serdev should adopt:
commit 0468a8071d7cfb0f5bc02b0888cec4525551299f

Author: Jiri Slaby (SUSE) <[email protected]>
Date:   Thu Aug 10 11:14:44 2023 +0200
Quoted 8 lines

tty: make counts in tty_port_client_operations hooks size_t

and propagate it further to its users. The commit was meant to exactly avoid these mistakes (but one layer upper).

btmtkuart_receive_buf is broken the same way.

Do you want to fix it yourself?

I'll send a patch myself, thanks.

#4 lore raw
In reply to Francesco Dolcini

Hi Francesco,

Quoted 74 lines · Francesco Dolcini
Quoted 11 lines

Hello all,
while doing some test with current [1] Linux mainline I randomly hit a warning. It is not systematic and I cannot really tell when it was introduced, posting here to collect some ideas.

Amitkumar, Neeraj: to me the issue is around the bluetooth/btnxpuart driver, however I could also be plain wrong.

The issue was reproduced on a Toradex Verdin AM62 [2] that is based on a TI
AM625 SOC (arm64) running with a arm64 defconfig and built with GCC 9

[3].

Quoted 6 lines
[    9.599027] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.962266] Bluetooth: hci0: Frame reassembly failed (-84)
[    9.972939] ------------[ cut here ]------------
[    9.977922] serial serial0: receive_buf returns -84 (count = 6)
[    9.994857] WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-

ttyport.c:37 ttyport_receive_buf+0xd8/0xf8

Quoted 1 line
[   10.004840] Modules linked in: mwifiex_sdio(+) mwifiex

snd_soc_simple_card crct10dif_ce cfg80211 snd_soc_simple_card_utils k3_j72xx_bandgap rti_wdt rtc_ti_k3 btnxpuart bluetooth sa2ul ecdh_generic ecc sha256_generic tidss rfkill libsha256 drm_dma_helper snd_soc_davinci_mcasp authenc omap_mailbox snd_soc_ti_udma snd_soc_ti_edma snd_soc_ti_sdma atmel_mxt_ts ina2xx snd_soc_nau8822 ti_sn65dsi83 tc358768 ti_ads1015 tps65219_pwrbutton at24 m_can_platform industrialio_triggered_buffer drm_kms_helper m_can kfifo_buf rtc_ds1307 lm75 pwm_tiehrpwm can_dev spi_omap2_mcspi panel_lvds pwm_bl libcomposite fuse drm backlight ipv6

Quoted 1 line
[   10.059984] CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-

00147-gf1a09972a45a #1

Quoted 1 line
[   10.071793] Hardware name: Toradex Verdin AM62 WB on Verdin

Development Board (DT)

Quoted 2 lines
[   10.082898] Workqueue: events_unbound flush_to_ldisc
[   10.091345] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS

BTYPE=--)

Quoted 4 lines
[   10.101820] pc : ttyport_receive_buf+0xd8/0xf8
[   10.109712] lr : ttyport_receive_buf+0xd8/0xf8
[   10.117581] sp : ffff800082b9bd20
[   10.124202] x29: ffff800082b9bd20 x28: ffff00000000ee05 x27:

ffff0000002f21c0

Quoted 1 line
[   10.134735] x26: ffff000002931820 x25: 61c8864680b583eb x24:

ffff0000002f21b8

Quoted 1 line
[   10.145209] x23: ffff00000026e740 x22: ffff0000002f21e0 x21:

ffffffffffffffac

Quoted 1 line
[   10.155686] x20: ffff000000da5c00 x19: 0000000000000006 x18:

0000000000000000

Quoted 1 line
[   10.166178] x17: ffff7fffbe0e7000 x16: ffff800080000000 x15:

000039966db1c650

Quoted 1 line
[   10.176564] x14: 000000000000022c x13: 000000000000022c x12:

0000000000000000

Quoted 1 line
[   10.186979] x11: 000000000000000a x10: 0000000000000a60 x9 :

ffff800082b9bb80

Quoted 1 line
[   10.197352] x8 : ffff00000026f200 x7 : ffff00003fd90080 x6 :

00000000000022e5

Quoted 1 line
[   10.207680] x5 : 00000000410fd030 x4 : 0000000000c0000e x3 :

ffff7fffbe0e7000

Quoted 1 line
[   10.218051] x2 : 0000000000000002 x1 : 0000000000000000 x0 :

0000000000000000

Quoted 11 lines
[   10.228393] Call trace:
[   10.233989]  ttyport_receive_buf+0xd8/0xf8
[   10.241224]  flush_to_ldisc+0xbc/0x1a4
[   10.248117]  process_scheduled_works+0x16c/0x28c
[   10.255851]  worker_thread+0x16c/0x2e0
[   10.262673]  kthread+0x11c/0x128
[   10.268953]  ret_from_fork+0x10/0x20
[   10.275460] ---[ end trace 0000000000000000 ]---
[   10.294674] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.461657] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.472025] Bluetooth: hci0: Frame reassembly failed (-84)

I think that what is happening is the following:

Quoted 8 lines

-> serdev-ttyport.c:ttyport_receive_buf()
-> btnxpuart.c:btnxpuart_receive_buf()

      -> h4_recv_buf() errors out
      -> return -84

-> warn because ret is <0

Is this the desired behavior? If I understand correct recv_buf() is supposed to return how many bytes it has consumed, e.g. something from 0 to count.

The recv_buf() returns how many bytes it has consumed and created a complete RX packet from received chunks, if everything goes as expected (>=0).
However, if there is a packet corruption, or the payload length in received header, and actual payload are not equal, or wrong sequence is received or there is a probable baudrate mismatch, it returns an error (<0).

In this case, -84 is illegal sequence error.

It would help if you could share with us some more info:
1) Test steps.
2) Logic Analyzer captures of UART TX/RX lines when this issue occurred, to check what is causing this illegal sequence error.
3) Is PDn pin toggled? If yes, then chip is probably sending out bootloader signatures at 115200, while host UART is at 3000000.

Thanks,
Neeraj

#5 lore raw
Quoted 80 lines · Neeraj sanjay kale
Quoted 80 lines · Francesco Dolcini
Quoted 11 lines

Hello all,
while doing some test with current [1] Linux mainline I randomly hit a warning. It is not systematic and I cannot really tell when it was introduced, posting here to collect some ideas.

Amitkumar, Neeraj: to me the issue is around the bluetooth/btnxpuart driver, however I could also be plain wrong.

The issue was reproduced on a Toradex Verdin AM62 [2] that is based on a TI
AM625 SOC (arm64) running with a arm64 defconfig and built with GCC 9

[3].

Quoted 6 lines
[    9.599027] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.962266] Bluetooth: hci0: Frame reassembly failed (-84)
[    9.972939] ------------[ cut here ]------------
[    9.977922] serial serial0: receive_buf returns -84 (count = 6)
[    9.994857] WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-

ttyport.c:37 ttyport_receive_buf+0xd8/0xf8

Quoted 1 line
[   10.004840] Modules linked in: mwifiex_sdio(+) mwifiex

snd_soc_simple_card crct10dif_ce cfg80211 snd_soc_simple_card_utils k3_j72xx_bandgap rti_wdt rtc_ti_k3 btnxpuart bluetooth sa2ul ecdh_generic ecc sha256_generic tidss rfkill libsha256 drm_dma_helper snd_soc_davinci_mcasp authenc omap_mailbox snd_soc_ti_udma snd_soc_ti_edma snd_soc_ti_sdma atmel_mxt_ts ina2xx snd_soc_nau8822 ti_sn65dsi83 tc358768 ti_ads1015 tps65219_pwrbutton at24 m_can_platform industrialio_triggered_buffer drm_kms_helper m_can kfifo_buf rtc_ds1307 lm75 pwm_tiehrpwm can_dev spi_omap2_mcspi panel_lvds pwm_bl libcomposite fuse drm backlight ipv6

Quoted 1 line
[   10.059984] CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-

00147-gf1a09972a45a #1

Quoted 1 line
[   10.071793] Hardware name: Toradex Verdin AM62 WB on Verdin

Development Board (DT)

Quoted 2 lines
[   10.082898] Workqueue: events_unbound flush_to_ldisc
[   10.091345] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS

BTYPE=--)

Quoted 4 lines
[   10.101820] pc : ttyport_receive_buf+0xd8/0xf8
[   10.109712] lr : ttyport_receive_buf+0xd8/0xf8
[   10.117581] sp : ffff800082b9bd20
[   10.124202] x29: ffff800082b9bd20 x28: ffff00000000ee05 x27:

ffff0000002f21c0

Quoted 1 line
[   10.134735] x26: ffff000002931820 x25: 61c8864680b583eb x24:

ffff0000002f21b8

Quoted 1 line
[   10.145209] x23: ffff00000026e740 x22: ffff0000002f21e0 x21:

ffffffffffffffac

Quoted 1 line
[   10.155686] x20: ffff000000da5c00 x19: 0000000000000006 x18:

0000000000000000

Quoted 1 line
[   10.166178] x17: ffff7fffbe0e7000 x16: ffff800080000000 x15:

000039966db1c650

Quoted 1 line
[   10.176564] x14: 000000000000022c x13: 000000000000022c x12:

0000000000000000

Quoted 1 line
[   10.186979] x11: 000000000000000a x10: 0000000000000a60 x9 :

ffff800082b9bb80

Quoted 1 line
[   10.197352] x8 : ffff00000026f200 x7 : ffff00003fd90080 x6 :

00000000000022e5

Quoted 1 line
[   10.207680] x5 : 00000000410fd030 x4 : 0000000000c0000e x3 :

ffff7fffbe0e7000

Quoted 1 line
[   10.218051] x2 : 0000000000000002 x1 : 0000000000000000 x0 :

0000000000000000

Quoted 11 lines
[   10.228393] Call trace:
[   10.233989]  ttyport_receive_buf+0xd8/0xf8
[   10.241224]  flush_to_ldisc+0xbc/0x1a4
[   10.248117]  process_scheduled_works+0x16c/0x28c
[   10.255851]  worker_thread+0x16c/0x2e0
[   10.262673]  kthread+0x11c/0x128
[   10.268953]  ret_from_fork+0x10/0x20
[   10.275460] ---[ end trace 0000000000000000 ]---
[   10.294674] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.461657] Bluetooth: hci0: Frame reassembly failed (-84)
[   10.472025] Bluetooth: hci0: Frame reassembly failed (-84)

I think that what is happening is the following:

-> serdev-ttyport.c:ttyport_receive_buf()
-> btnxpuart.c:btnxpuart_receive_buf()

      -> h4_recv_buf() errors out
      -> return -84

-> warn because ret is <0

Quoted 6 lines
Quoted 2 lines

Is this the desired behavior? If I understand correct recv_buf() is supposed to return how many bytes it has consumed, e.g. something from 0 to count.

However, if there is a packet corruption, or the payload length in received header, and actual payload are not equal, or wrong sequence is received or there is a probable baudrate mismatch, it returns an error (<0).

yes, what the code is doing is clear, however from this email thread I understand that this is wrong. I'll send a patch to fix this.

Quoted 4 lines

In this case, -84 is illegal sequence error.

It would help if you could share with us some more info:
1) Test steps.

just powering up the board, nothing else. it's a toradex verdin am62 (device tree available in mainline kernel).

Quoted 2 lines

3) Is PDn pin toggled? If yes, then chip is probably sending out bootloader signatures at 115200, while host UART is at 3000000.

I would not be surprise if this was because of the PDn pin, the signal is shared between wi-fi and bt, but only the wi-fi part is aware of it and the firmware loaded is the combo one.

Depending on the load order it could just fails.

See also https://lore.kernel.org/all/[email protected]/

With that said my concern here is not that is failing, is that I have a kernel warning, and this seems just a mistake in the code.

Francesco