There is KASAN: global-out-of-bounds Read in bpf_link_show_fdinfo in v6.7-rc5
Hi Jiri Olsa,
Greeting!
There is KASAN: global-out-of-bounds Read in bpf_link_show_fdinfo in v6.7-rc5 kernel in vm.
All detailed info: https://github.com/xupengfe/syzkaller_logs/tree/main/231213_090512_bpf_link_show_fdinfo
Syzkaller reproduced code: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/repro.c
Syzkaller syscall reproduced steps: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/repro.prog
Kconfig(make olddefconfig): https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/kconfig_origin
Bisect info: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/bisect_info.log
Issue dmesg: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/a39b6ac3781d46ba18193c9dbb2110f31e9bffe9_dmesg.log
bzImage: https://github.com/xupengfe/syzkaller_logs/raw/main/231213_090512_bpf_link_show_fdinfo/bzImage_a39b6ac3781d46ba18193c9dbb2110f31e9bffe9.tar.gz
Bisected and related commit is as follows:
"0b779b61f651 bpf: Add cookies support for uprobe_multi link
"
Make the revert the commit on top of v6.7-rc5 kernel failed, could not double confirm for the suspected commit.
[ 20.624445] repro[731]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.625349] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.631427] repro[734]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.632325] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.665797] repro[737]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.666718] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.671614] ================================================================== [ 20.672115] BUG: KASAN: global-out-of-bounds in bpf_link_show_fdinfo+0x30b/0x330 [ 20.672598] Read of size 8 at addr ffffffff8593c9e0 by task systemd-coredum/732 [ 20.673066] [ 20.673179] CPU: 0 PID: 732 Comm: systemd-coredum Not tainted 6.7.0-rc5-a39b6ac3781d+ #1 [ 20.673687] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 20.674381] Call Trace: [ 20.674552] <TASK> [ 20.674701] dump_stack_lvl+0xaa/0x110 [ 20.674964] print_report+0xcf/0x620 [ 20.675209] ? bpf_link_show_fdinfo+0x30b/0x330 [ 20.675514] ? kasan_addr_to_slab+0x11/0xb0 [ 20.675794] ? bpf_link_show_fdinfo+0x30b/0x330 [ 20.676103] kasan_report+0xcd/0x110 [ 20.676342] ? bpf_link_show_fdinfo+0x30b/0x330 [ 20.676651] __asan_report_load8_noabort+0x18/0x20 [ 20.676960] bpf_link_show_fdinfo+0x30b/0x330 [ 20.677253] ? __pfx_bpf_link_show_fdinfo+0x10/0x10 [ 20.677569] ? locks_remove_file+0x6d0/0x790 [ 20.677861] ? __pfx_bpf_link_show_fdinfo+0x10/0x10 [ 20.678169] seq_show+0x581/0x890 [ 20.678402] seq_read_iter+0x51a/0x1300 [ 20.678672] ? iov_iter_init+0x55/0x200 [ 20.678939] seq_read+0x171/0x210 [ 20.679172] ? __pfx_seq_read+0x10/0x10 [ 20.679438] ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 [ 20.679784] ? fsnotify_perm.part.0+0x260/0x5f0 [ 20.680087] ? security_file_permission+0xc5/0xf0 [ 20.680399] vfs_read+0x202/0x930 [ 20.680626] ? __pfx_seq_read+0x10/0x10 [ 20.680884] ? __pfx_vfs_read+0x10/0x10 [ 20.681137] ? __pfx_lock_release+0x10/0x10 [ 20.681398] ? ktime_get_coarse_real_ts64+0x4d/0xf0 [ 20.681706] ? __this_cpu_preempt_check+0x21/0x30 [ 20.681997] ? seqcount_lockdep_reader_access.constprop.0+0xb4/0xd0 [ 20.682379] ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 [ 20.682722] ksys_read+0x14f/0x290 [ 20.682956] ? __pfx_ksys_read+0x10/0x10 [ 20.683226] __x64_sys_read+0x7b/0xc0 [ 20.683473] ? syscall_enter_from_user_mode+0x53/0x70 [ 20.683790] do_syscall_64+0x42/0xf0 [ 20.684027] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 20.684327] RIP: 0033:0x7f688893eaf2 [ 20.684556] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 0c 08 00 e8 35 eb 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 20.685647] RSP: 002b:00007ffde2a29e58 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 20.686108] RAX: ffffffffffffffda RBX: 0000562b794752d0 RCX: 00007f688893eaf2 [ 20.686527] RDX: 0000000000000400 RSI: 0000562b79475530 RDI: 0000000000000006 [ 20.686964] RBP: 00007f68889f75e0 R08: 0000000000000006 R09: 00007f68889b14e0 [ 20.687401] R10: 0000000000001000 R11: 0000000000000246 R12: 00007f688863c9c8 [ 20.687837] R13: 0000000000000d68 R14: 00007f68889f69e0 R15: 0000000000000d68 [ 20.688309] </TASK> [ 20.688465] [ 20.688571] The buggy address belongs to the variable: [ 20.688885] bpf_link_type_strs+0x60/0x80 [ 20.689145] [ 20.689251] The buggy address belongs to the physical page: [ 20.689611] page:00000000449bb84f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x593c [ 20.690184] flags: 0xfffffc0004000(reserved|node=0|zone=1|lastcpupid=0x1fffff) [ 20.690601] page_type: 0xffffffff() [ 20.690824] raw: 000fffffc0004000 ffffea0000164f08 ffffea0000164f08 0000000000000000 [ 20.691307] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 20.691795] page dumped because: kasan: bad access detected [ 20.692152] [ 20.692254] Memory state around the buggy address: [ 20.692552] ffffffff8593c880: 04 f9 f9 f9 f9 f9 f9 f9 05 f9 f9 f9 f9 f9 f9 f9 [ 20.693008] ffffffff8593c900: 00 05 f9 f9 f9 f9 f9 f9 00 03 f9 f9 f9 f9 f9 f9 [ 20.693432] >ffffffff8593c980: 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 [ 20.693877] ^ [ 20.694265] ffffffff8593ca00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 20.694707] ffffffff8593ca80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 20.695158] ================================================================== [ 20.695666] Disabling lock debugging due to kernel taint [ 20.720062] repro[741]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.720827] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.724913] repro[744]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.725791] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.732282] repro[747]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.733148] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.770165] repro[750]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.771018] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.820152] repro[757]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.820984] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.837880] repro[760]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.838815] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.839423] repro[755]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.840255] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 21.068187] Pid 786(repro) over core_pipe_limit [ 21.068503] Skipping core dump
I hope it's helpful.
---
If you don't need the following environment to reproduce the problem or if you already have one reproduced environment, please ignore the following information.
How to reproduce:
git clone https://gitlab.com/xupengfe/repro_vm_env.git
cd repro_vm_env
tar -xvf repro_vm_env.tar.gz
cd repro_vm_env; ./start3.sh // it needs qemu-system-x86_64 and I used v7.1.0
// start3.sh will load bzImage_2241ab53cbb5cdb08a6b2d4688feb13971058f65 v6.2-rc5 kernel
// You could change the bzImage_xxx as you want
// Maybe you need to remove line "-drive if=pflash,format=raw,readonly=on,file=./OVMF_CODE.fd \" for different qemu version
You could use below command to log in, there is no password for root.
ssh -p 10023 root@localhost
After login vm(virtual machine) successfully, you could transfer reproduced binary to the vm by below way, and reproduce the problem in vm:
gcc -pthread -o repro repro.c
scp -P 10023 repro root@localhost:/root/
Get the bzImage for target kernel:
Please use target kconfig and copy it to kernel_src/.config make olddefconfig
make -jx bzImage //x should equal or less than cpu num your pc has
Fill the bzImage file into above start3.sh to load the target kernel in vm.
Tips:
If you already have qemu-system-x86_64, please ignore below info.
If you want to install qemu v7.1.0 version:
git clone https://github.com/qemu/qemu.git
cd qemu
git checkout -f v7.1.0
mkdir build
cd build
yum install -y ninja-build.x86_64
yum -y install libslirp-devel.x86_64
../configure --target-list=x86_64-softmmu --enable-kvm --enable-vnc --enable-gtk --enable-sdl --enable-usb-redir --enable-slirp make
make install
Best Regards,
Thanks!
Hi,
Quoted 6 lines · Pengfei Xu
Hi Jiri Olsa,
Greeting!
There is KASAN: global-out-of-bounds Read in
bpf_link_show_fdinfoin v6.7-rc5 kernel in vm.
It seems that the out-of-bound access is due to BPF_LINK_TYPE_UPROBE_MULTI and other link types don't define BPF_LINK_TYPE(type, name) in linux/bpf_types.h, so the content and the length of bpf_link_type_strs array is unexpected. But I will leave the fixes to Jiri and I have to continue on the fix of the warning during bpf ma initialization.
Quoted 161 lines
All detailed info: https://github.com/xupengfe/syzkaller_logs/tree/main/231213_090512_bpf_link_show_fdinfo
Syzkaller reproduced code: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/repro.c
Syzkaller syscall reproduced steps: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/repro.prog
Kconfig(make olddefconfig): https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/kconfig_origin
Bisect info: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/bisect_info.log
Issue dmesg: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/a39b6ac3781d46ba18193c9dbb2110f31e9bffe9_dmesg.log
bzImage: https://github.com/xupengfe/syzkaller_logs/raw/main/231213_090512_bpf_link_show_fdinfo/bzImage_a39b6ac3781d46ba18193c9dbb2110f31e9bffe9.tar.gzBisected and related commit is as follows:
"0b779b61f651bpf: Add cookies support foruprobe_multilink
"
Make the revert the commit on top of v6.7-rc5 kernel failed, could not double confirm for the suspected commit.[ 20.624445] repro[731]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.625349] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.631427] repro[734]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.632325] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.665797] repro[737]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.666718] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.671614] ================================================================== [ 20.672115] BUG: KASAN: global-out-of-bounds in bpf_link_show_fdinfo+0x30b/0x330 [ 20.672598] Read of size 8 at addr ffffffff8593c9e0 by task systemd-coredum/732 [ 20.673066] [ 20.673179] CPU: 0 PID: 732 Comm: systemd-coredum Not tainted 6.7.0-rc5-a39b6ac3781d+ #1 [ 20.673687] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 20.674381] Call Trace: [ 20.674552] <TASK> [ 20.674701] dump_stack_lvl+0xaa/0x110 [ 20.674964] print_report+0xcf/0x620 [ 20.675209] ? bpf_link_show_fdinfo+0x30b/0x330 [ 20.675514] ? kasan_addr_to_slab+0x11/0xb0 [ 20.675794] ? bpf_link_show_fdinfo+0x30b/0x330 [ 20.676103] kasan_report+0xcd/0x110 [ 20.676342] ? bpf_link_show_fdinfo+0x30b/0x330 [ 20.676651] __asan_report_load8_noabort+0x18/0x20 [ 20.676960] bpf_link_show_fdinfo+0x30b/0x330 [ 20.677253] ? __pfx_bpf_link_show_fdinfo+0x10/0x10 [ 20.677569] ? locks_remove_file+0x6d0/0x790 [ 20.677861] ? __pfx_bpf_link_show_fdinfo+0x10/0x10 [ 20.678169] seq_show+0x581/0x890 [ 20.678402] seq_read_iter+0x51a/0x1300 [ 20.678672] ? iov_iter_init+0x55/0x200 [ 20.678939] seq_read+0x171/0x210 [ 20.679172] ? __pfx_seq_read+0x10/0x10 [ 20.679438] ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 [ 20.679784] ? fsnotify_perm.part.0+0x260/0x5f0 [ 20.680087] ? security_file_permission+0xc5/0xf0 [ 20.680399] vfs_read+0x202/0x930 [ 20.680626] ? __pfx_seq_read+0x10/0x10 [ 20.680884] ? __pfx_vfs_read+0x10/0x10 [ 20.681137] ? __pfx_lock_release+0x10/0x10 [ 20.681398] ? ktime_get_coarse_real_ts64+0x4d/0xf0 [ 20.681706] ? __this_cpu_preempt_check+0x21/0x30 [ 20.681997] ? seqcount_lockdep_reader_access.constprop.0+0xb4/0xd0 [ 20.682379] ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 [ 20.682722] ksys_read+0x14f/0x290 [ 20.682956] ? __pfx_ksys_read+0x10/0x10 [ 20.683226] __x64_sys_read+0x7b/0xc0 [ 20.683473] ? syscall_enter_from_user_mode+0x53/0x70 [ 20.683790] do_syscall_64+0x42/0xf0 [ 20.684027] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 20.684327] RIP: 0033:0x7f688893eaf2 [ 20.684556] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 0c 08 00 e8 35 eb 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 20.685647] RSP: 002b:00007ffde2a29e58 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 20.686108] RAX: ffffffffffffffda RBX: 0000562b794752d0 RCX: 00007f688893eaf2 [ 20.686527] RDX: 0000000000000400 RSI: 0000562b79475530 RDI: 0000000000000006 [ 20.686964] RBP: 00007f68889f75e0 R08: 0000000000000006 R09: 00007f68889b14e0 [ 20.687401] R10: 0000000000001000 R11: 0000000000000246 R12: 00007f688863c9c8 [ 20.687837] R13: 0000000000000d68 R14: 00007f68889f69e0 R15: 0000000000000d68 [ 20.688309] </TASK> [ 20.688465] [ 20.688571] The buggy address belongs to the variable: [ 20.688885] bpf_link_type_strs+0x60/0x80 [ 20.689145] [ 20.689251] The buggy address belongs to the physical page: [ 20.689611] page:00000000449bb84f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x593c [ 20.690184] flags: 0xfffffc0004000(reserved|node=0|zone=1|lastcpupid=0x1fffff) [ 20.690601] page_type: 0xffffffff() [ 20.690824] raw: 000fffffc0004000 ffffea0000164f08 ffffea0000164f08 0000000000000000 [ 20.691307] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 20.691795] page dumped because: kasan: bad access detected [ 20.692152] [ 20.692254] Memory state around the buggy address: [ 20.692552] ffffffff8593c880: 04 f9 f9 f9 f9 f9 f9 f9 05 f9 f9 f9 f9 f9 f9 f9 [ 20.693008] ffffffff8593c900: 00 05 f9 f9 f9 f9 f9 f9 00 03 f9 f9 f9 f9 f9 f9 [ 20.693432] >ffffffff8593c980: 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 [ 20.693877] ^ [ 20.694265] ffffffff8593ca00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 20.694707] ffffffff8593ca80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 20.695158] ================================================================== [ 20.695666] Disabling lock debugging due to kernel taint [ 20.720062] repro[741]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.720827] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.724913] repro[744]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.725791] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.732282] repro[747]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.733148] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.770165] repro[750]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.771018] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.820152] repro[757]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.820984] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.837880] repro[760]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.838815] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.839423] repro[755]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.840255] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 21.068187] Pid 786(repro) over core_pipe_limit [ 21.068503] Skipping core dumpI hope it's helpful.
---
If you don't need the following environment to reproduce the problem or if you already have one reproduced environment, please ignore the following information.
How to reproduce:
git clone https://gitlab.com/xupengfe/repro_vm_env.git
cdrepro_vm_env
tar -xvf repro_vm_env.tar.gz
cdrepro_vm_env; ./start3.sh // it needs qemu-system-x86_64 and I used v7.1.0
//start3.shwill loadbzImage_2241ab53cbb5cdb08a6b2d4688feb13971058f65v6.2-rc5 kernel
// You could change thebzImage_xxxas you want
// Maybe you need to remove line "-drive if=pflash,format=raw,readonly=on,file=./OVMF_CODE.fd \" for different qemu version
You could use below command to log in, there is no password for root.
ssh -p 10023 root@localhostAfter login vm(virtual machine) successfully, you could transfer reproduced binary to the vm by below way, and reproduce the problem in vm:
gcc -pthread -o reprorepro.c
scp -P 10023 repro root@localhost:/root/Get the bzImage for target kernel:
Please use target kconfig and copy it to kernel_src/.config make olddefconfig
make -jx bzImage //x should equal or less than cpu num your pc hasFill the bzImage file into above
start3.shto load the target kernel in vm.Tips:
If you already have qemu-system-x86_64, please ignore below info.
If you want to install qemu v7.1.0 version:
git clone https://github.com/qemu/qemu.git
cd qemu
git checkout -f v7.1.0
mkdir build
cd build
yum install -y ninja-build.x86_64
yum -y install libslirp-devel.x86_64
../configure --target-list=x86_64-softmmu --enable-kvm --enable-vnc --enable-gtk --enable-sdl --enable-usb-redir --enable-slirp make
make installBest Regards,
Thanks!.
Quoted 10 lines · Hou Tao
Hi,
Quoted 6 lines · Pengfei Xu
Hi Jiri Olsa,
Greeting!
There is KASAN: global-out-of-bounds Read in
bpf_link_show_fdinfoin v6.7-rc5 kernel in vm.
Quoted 6 lines
It seems that the out-of-bound access is due to
BPF_LINK_TYPE_UPROBE_MULTIand other link types don't defineBPF_LINK_TYPE(type, name)inlinux/bpf_types.h, so the content and the length ofbpf_link_type_strsarray is unexpected. But I will leave the fixes to Jiri and I have to continue on the fix of the warning during bpf ma initialization.
right, that seems to be the case.. will send the fix
thanks,
jirka
Quoted 163 lines
Quoted 161 lines
All detailed info: https://github.com/xupengfe/syzkaller_logs/tree/main/231213_090512_bpf_link_show_fdinfo
Syzkaller reproduced code: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/repro.c
Syzkaller syscall reproduced steps: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/repro.prog
Kconfig(make olddefconfig): https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/kconfig_origin
Bisect info: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/bisect_info.log
Issue dmesg: https://github.com/xupengfe/syzkaller_logs/blob/main/231213_090512_bpf_link_show_fdinfo/a39b6ac3781d46ba18193c9dbb2110f31e9bffe9_dmesg.log
bzImage: https://github.com/xupengfe/syzkaller_logs/raw/main/231213_090512_bpf_link_show_fdinfo/bzImage_a39b6ac3781d46ba18193c9dbb2110f31e9bffe9.tar.gzBisected and related commit is as follows:
"0b779b61f651bpf: Add cookies support foruprobe_multilink
"
Make the revert the commit on top of v6.7-rc5 kernel failed, could not double confirm for the suspected commit.[ 20.624445] repro[731]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.625349] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.631427] repro[734]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.632325] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.665797] repro[737]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.666718] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.671614] ================================================================== [ 20.672115] BUG: KASAN: global-out-of-bounds in bpf_link_show_fdinfo+0x30b/0x330 [ 20.672598] Read of size 8 at addr ffffffff8593c9e0 by task systemd-coredum/732 [ 20.673066] [ 20.673179] CPU: 0 PID: 732 Comm: systemd-coredum Not tainted 6.7.0-rc5-a39b6ac3781d+ #1 [ 20.673687] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 20.674381] Call Trace: [ 20.674552] <TASK> [ 20.674701] dump_stack_lvl+0xaa/0x110 [ 20.674964] print_report+0xcf/0x620 [ 20.675209] ? bpf_link_show_fdinfo+0x30b/0x330 [ 20.675514] ? kasan_addr_to_slab+0x11/0xb0 [ 20.675794] ? bpf_link_show_fdinfo+0x30b/0x330 [ 20.676103] kasan_report+0xcd/0x110 [ 20.676342] ? bpf_link_show_fdinfo+0x30b/0x330 [ 20.676651] __asan_report_load8_noabort+0x18/0x20 [ 20.676960] bpf_link_show_fdinfo+0x30b/0x330 [ 20.677253] ? __pfx_bpf_link_show_fdinfo+0x10/0x10 [ 20.677569] ? locks_remove_file+0x6d0/0x790 [ 20.677861] ? __pfx_bpf_link_show_fdinfo+0x10/0x10 [ 20.678169] seq_show+0x581/0x890 [ 20.678402] seq_read_iter+0x51a/0x1300 [ 20.678672] ? iov_iter_init+0x55/0x200 [ 20.678939] seq_read+0x171/0x210 [ 20.679172] ? __pfx_seq_read+0x10/0x10 [ 20.679438] ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 [ 20.679784] ? fsnotify_perm.part.0+0x260/0x5f0 [ 20.680087] ? security_file_permission+0xc5/0xf0 [ 20.680399] vfs_read+0x202/0x930 [ 20.680626] ? __pfx_seq_read+0x10/0x10 [ 20.680884] ? __pfx_vfs_read+0x10/0x10 [ 20.681137] ? __pfx_lock_release+0x10/0x10 [ 20.681398] ? ktime_get_coarse_real_ts64+0x4d/0xf0 [ 20.681706] ? __this_cpu_preempt_check+0x21/0x30 [ 20.681997] ? seqcount_lockdep_reader_access.constprop.0+0xb4/0xd0 [ 20.682379] ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 [ 20.682722] ksys_read+0x14f/0x290 [ 20.682956] ? __pfx_ksys_read+0x10/0x10 [ 20.683226] __x64_sys_read+0x7b/0xc0 [ 20.683473] ? syscall_enter_from_user_mode+0x53/0x70 [ 20.683790] do_syscall_64+0x42/0xf0 [ 20.684027] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 20.684327] RIP: 0033:0x7f688893eaf2 [ 20.684556] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 0c 08 00 e8 35 eb 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 20.685647] RSP: 002b:00007ffde2a29e58 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 20.686108] RAX: ffffffffffffffda RBX: 0000562b794752d0 RCX: 00007f688893eaf2 [ 20.686527] RDX: 0000000000000400 RSI: 0000562b79475530 RDI: 0000000000000006 [ 20.686964] RBP: 00007f68889f75e0 R08: 0000000000000006 R09: 00007f68889b14e0 [ 20.687401] R10: 0000000000001000 R11: 0000000000000246 R12: 00007f688863c9c8 [ 20.687837] R13: 0000000000000d68 R14: 00007f68889f69e0 R15: 0000000000000d68 [ 20.688309] </TASK> [ 20.688465] [ 20.688571] The buggy address belongs to the variable: [ 20.688885] bpf_link_type_strs+0x60/0x80 [ 20.689145] [ 20.689251] The buggy address belongs to the physical page: [ 20.689611] page:00000000449bb84f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x593c [ 20.690184] flags: 0xfffffc0004000(reserved|node=0|zone=1|lastcpupid=0x1fffff) [ 20.690601] page_type: 0xffffffff() [ 20.690824] raw: 000fffffc0004000 ffffea0000164f08 ffffea0000164f08 0000000000000000 [ 20.691307] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 20.691795] page dumped because: kasan: bad access detected [ 20.692152] [ 20.692254] Memory state around the buggy address: [ 20.692552] ffffffff8593c880: 04 f9 f9 f9 f9 f9 f9 f9 05 f9 f9 f9 f9 f9 f9 f9 [ 20.693008] ffffffff8593c900: 00 05 f9 f9 f9 f9 f9 f9 00 03 f9 f9 f9 f9 f9 f9 [ 20.693432] >ffffffff8593c980: 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 [ 20.693877] ^ [ 20.694265] ffffffff8593ca00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 20.694707] ffffffff8593ca80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 20.695158] ================================================================== [ 20.695666] Disabling lock debugging due to kernel taint [ 20.720062] repro[741]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.720827] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.724913] repro[744]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.725791] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.732282] repro[747]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.733148] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.770165] repro[750]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.771018] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.820152] repro[757]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.820984] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.837880] repro[760]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 1 (core 1, socket 0) [ 20.838815] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 20.839423] repro[755]: segfault at 0 ip 0000000000000000 sp 0000000020000288 error 14 in repro[400000+1000] likely on CPU 0 (core 0, socket 0) [ 20.840255] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 21.068187] Pid 786(repro) over core_pipe_limit [ 21.068503] Skipping core dumpI hope it's helpful.
---
If you don't need the following environment to reproduce the problem or if you already have one reproduced environment, please ignore the following information.
How to reproduce:
git clone https://gitlab.com/xupengfe/repro_vm_env.git
cdrepro_vm_env
tar -xvf repro_vm_env.tar.gz
cdrepro_vm_env; ./start3.sh // it needs qemu-system-x86_64 and I used v7.1.0
//start3.shwill loadbzImage_2241ab53cbb5cdb08a6b2d4688feb13971058f65v6.2-rc5 kernel
// You could change thebzImage_xxxas you want
// Maybe you need to remove line "-drive if=pflash,format=raw,readonly=on,file=./OVMF_CODE.fd \" for different qemu version
You could use below command to log in, there is no password for root.
ssh -p 10023 root@localhostAfter login vm(virtual machine) successfully, you could transfer reproduced binary to the vm by below way, and reproduce the problem in vm:
gcc -pthread -o reprorepro.c
scp -P 10023 repro root@localhost:/root/Get the bzImage for target kernel:
Please use target kconfig and copy it to kernel_src/.config make olddefconfig
make -jx bzImage //x should equal or less than cpu num your pc hasFill the bzImage file into above
start3.shto load the target kernel in vm.Tips:
If you already have qemu-system-x86_64, please ignore below info.
If you want to install qemu v7.1.0 version:
git clone https://github.com/qemu/qemu.git
cd qemu
git checkout -f v7.1.0
mkdir build
cd build
yum install -y ninja-build.x86_64
yum -y install libslirp-devel.x86_64
../configure --target-list=x86_64-softmmu --enable-kvm --enable-vnc --enable-gtk --enable-sdl --enable-usb-redir --enable-slirp make
make installBest Regards,
Thanks!.