Skip to contentSkip to conversation

make deb-pkg: Does not strip debug symbols when compressing modules

DISCUSSION Salvatore Bonaccorso 3 participants 4 messages Dec 14, 2023 – Dec 16, 2023 Kbuild

lore
Share & tools
lore
#0 lore raw

Hi

When using (only tested with XZ compression, but the others should behave similarly) CONFIG_MODULE_COMPRESS_XZ=y to compress the modules, it looks that the debug symbols are not striped.

Building with the attached test configuration results in packages:

-rw-r--r-- 1 build build 8.9M Dec 14 20:47 linux-headers-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build 75M Dec 14 20:48 linux-image-6.7.0-rc5+-dbg_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build 1014M Dec 14 20:47 linux-image-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb -rw-r--r-- 1 build build 1.3M Dec 14 20:47 linux-libc-dev_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb

This is odd, the linux-image-6.7.0-rc5+ package has a size of almost 1G and the modules are not stripped.

Switching the values instread to

CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_XZ is not set

the packages are again produced correctly:

-rw-r--r-- 1 build build 8.9M Dec 14 20:59 linux-headers-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb -rw-r--r-- 1 build build 819M Dec 14 21:00 linux-image-6.7.0-rc5+-dbg_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb -rw-r--r-- 1 build build 73M Dec 14 20:59 linux-image-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb -rw-r--r-- 1 build build 1.3M Dec 14 20:59 linux-libc-dev_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb

Regards,
Salvatore

#1 lore raw

Hi,

Quoted 23 lines · Salvatore Bonaccorso

Hi

When using (only tested with XZ compression, but the others should behave similarly) CONFIG_MODULE_COMPRESS_XZ=y to compress the modules, it looks that the debug symbols are not striped.

Building with the attached test configuration results in packages:

(quoted diff) +0 -4
-rw-r--r-- 1 build build  8.9M Dec 14 20:47 linux-headers-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build   75M Dec 14 20:48 linux-image-6.7.0-rc5+-dbg_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build 1014M Dec 14 20:47 linux-image-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build  1.3M Dec 14 20:47 linux-libc-dev_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb

This is odd, the linux-image-6.7.0-rc5+ package has a size of almost 1G and the modules are not stripped.

Switching the values instread to

CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_XZ is not set

the packages are again produced correctly:

Review

Quoted 4 lines
(quoted diff) +0 -4
-rw-r--r-- 1 build build 8.9M Dec 14 20:59 linux-headers-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb
-rw-r--r-- 1 build build 819M Dec 14 21:00 linux-image-6.7.0-rc5+-dbg_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb
-rw-r--r-- 1 build build  73M Dec 14 20:59 linux-image-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb
-rw-r--r-- 1 build build 1.3M Dec 14 20:59 linux-libc-dev_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb

and the classical one. Missed to attach the promised attachement. The used config is now here.

Regards,
Salvatore

#2 lore raw
Quoted 26 lines · Salvatore Bonaccorso

Hi,

Quoted 23 lines · Salvatore Bonaccorso

Hi

When using (only tested with XZ compression, but the others should behave similarly) CONFIG_MODULE_COMPRESS_XZ=y to compress the modules, it looks that the debug symbols are not striped.

Building with the attached test configuration results in packages:

(quoted diff) +0 -4
-rw-r--r-- 1 build build  8.9M Dec 14 20:47 linux-headers-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build   75M Dec 14 20:48 linux-image-6.7.0-rc5+-dbg_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build 1014M Dec 14 20:47 linux-image-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build  1.3M Dec 14 20:47 linux-libc-dev_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb

This is odd, the linux-image-6.7.0-rc5+ package has a size of almost 1G and the modules are not stripped.

Switching the values instread to

CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_XZ is not set

the packages are again produced correctly:

Quoted 7 lines

Review

Quoted 4 lines
(quoted diff) +0 -4
-rw-r--r-- 1 build build 8.9M Dec 14 20:59 linux-headers-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb
-rw-r--r-- 1 build build 819M Dec 14 21:00 linux-image-6.7.0-rc5+-dbg_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb
-rw-r--r-- 1 build build  73M Dec 14 20:59 linux-image-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb
-rw-r--r-- 1 build build 1.3M Dec 14 20:59 linux-libc-dev_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb

and the classical one. Missed to attach the promised attachement. The used config is now here.

:)

Hi Salvatore,

did you try to build with 'make INSTALL_MOD_STRIP=1 ...'? When I'm reproducing your issue here, the flag reduces the package size from ~1GB to ~95MB.

Kind regards,
Nicolas

#3 lore raw
In reply to Salvatore Bonaccorso
Quoted 35 lines · Salvatore Bonaccorso

Hi,

Quoted 23 lines · Salvatore Bonaccorso

Hi

When using (only tested with XZ compression, but the others should behave similarly) CONFIG_MODULE_COMPRESS_XZ=y to compress the modules, it looks that the debug symbols are not striped.

Building with the attached test configuration results in packages:

(quoted diff) +0 -4
-rw-r--r-- 1 build build  8.9M Dec 14 20:47 linux-headers-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build   75M Dec 14 20:48 linux-image-6.7.0-rc5+-dbg_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build 1014M Dec 14 20:47 linux-image-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb
-rw-r--r-- 1 build build  1.3M Dec 14 20:47 linux-libc-dev_6.7.0-rc5-00042-g88035e5694a8-1_amd64.deb

This is odd, the linux-image-6.7.0-rc5+ package has a size of almost 1G and the modules are not stripped.

Switching the values instread to

CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_XZ is not set

the packages are again produced correctly:

Review

Quoted 4 lines
(quoted diff) +0 -4
-rw-r--r-- 1 build build 8.9M Dec 14 20:59 linux-headers-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb
-rw-r--r-- 1 build build 819M Dec 14 21:00 linux-image-6.7.0-rc5+-dbg_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb
-rw-r--r-- 1 build build  73M Dec 14 20:59 linux-image-6.7.0-rc5+_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb
-rw-r--r-- 1 build build 1.3M Dec 14 20:59 linux-libc-dev_6.7.0-rc5-00042-g88035e5694a8-2_amd64.deb

and the classical one. Missed to attach the promised attachement. The used config is now here.

Quoted 2 lines

Regards,
Salvatore

The debug package never compiled properly with module compression.

The suffix of modules is .ko.xz instead of .ko in your case.

The following line in scripts/package/builddeb does not match anything.

for module in $(find ${image_pdir}/lib/modules/ -name *.ko -printf
'%P\n'); do

So, nothing is copied to linux-image-dbg, nothing is stripped from linux-image.

Debian kernel does similar, and it was OK because
Debian does not enable CONFIG_MODULE_COMPRESS_*.

Recently, the following commit was applied. [1]

commit de26137e2a9f847ce65e370d4bf61745f75a4e5d

Author:     Bastian Blank <[email protected]>
AuthorDate: Wed Dec 14 09:52:23 2022 +0100
Commit:     Bastian Blank <[email protected]>
CommitDate: Sun Oct 8 10:29:38 2023 +0200

Drop not needed extra step to add debug links

The build step already includes a sufficient GNU debug link section containing a build ID in the kernel modules. This means we don't have to manually create one later, so remove the code that does it.

Perhaps, upstream kernel can do similar things to make the code simpler. ('make module_install INSTALL_MOD_STRIP=1' for linux-image, 'make modules_install' for linux-image-dbg)

I CCed Ben and Bastian.

[1] https://salsa.debian.org/kernel-team/linux/-/commit/de26137e2a9f847ce65e370d4bf61745f75a4e5d

Signature · 2 lines
Best Regards
Masahiro Yamada