Skip to contentSkip to conversation

tools build: Don't set libunwind as available if test-all.c build succeeds

PATCH In review Arnaldo Carvalho de Melo 3 participants 4 messages Apr 4, 2025 – Apr 7, 2025 perf events

lore
Share & tools
lore

Arnaldo Carvalho de Melo

author maintainer
#0 lore raw

PATCH 1/1 tools build: Don't set libunwind as available if test-all.c build succeeds

The tools/build/feature/test-all.c file tries to detect the expected, most common set of libraries/features we expect to have available to build perf with.

At some point libunwind was deemed not to be part of that set of libraries, but the patches making it to be opt-in ended up forgetting some details, fix one more.

Testing it:

  $ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
  $ rpm -q libunwind-devel
  libunwind-devel-1.8.0-3.fc40.x86_64
  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
  ...                               libunwind: [ on  ]
    CC      /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/arch/x86/util/unwind-libunwind.o
    CC      /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
    CC      /tmp/build/perf-tools-next/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/util/unwind-libunwind-local.o
    CC      /tmp/build/perf-tools-next/util/unwind-libunwind.o
	  libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f615a549000)
	  libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f615a52f000)
  $ sudo rpm -e libunwind-devel
  $ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
  Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
  ...                               libunwind: [ OFF ]
    CC      /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/arch/x86/util/unwind-libdw.o
    CC      /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
    CC      /tmp/build/perf-tools-next/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/util/unwind-libdw.o
  $

Should be in a separate patch, but tired now, so also adding a message about the need to use LIBUNWIND=1 in the output when its not available, so done here as well.

So, now when the devel files are not available we get:

  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
  Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR and set LIBUNWIND=1 in the make command line as it is opt-in now
  ...                               libunwind: [ OFF ]
  $
Fixes 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than opt-out")
Cc Adrian Hunter <[email protected]>
Cc Dmitry Vyukov <[email protected]>
Cc Ian Rogers <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc James Clark <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/build/Makefile.feature | 1 -
 tools/perf/Makefile.config   | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)
tools/build/Makefile.feature +0 -1
index 1931b6321314684c..54c8adfb94662c03 100644
@@ -87,7 +87,6 @@ FEATURE_TESTS_BASIC :=                  \
         libtracefs                      \
         libcpupower                     \
         libcrypto                       \
-        libunwind                       \
         pthread-attr-setaffinity-np     \
         pthread-barrier     		\
         reallocarray                    \
tools/perf/Makefile.config +3 -1
index eea95c6c0c71f76e..8ff1d8ade73fc061 100644
@@ -624,6 +624,8 @@ endif
 ifndef NO_LIBUNWIND
   have_libunwind :=
 
+  $(call feature_check,libunwind)
+
   $(call feature_check,libunwind-x86)
   ifeq ($(feature-libunwind-x86), 1)
     $(call detected,CONFIG_LIBUNWIND_X86)
@@ -648,7 +650,7 @@ ifndef NO_LIBUNWIND
   endif
 
   ifneq ($(feature-libunwind), 1)
-    $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR)
+    $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR and set LIBUNWIND=1 in the make command line as it is opt-in now)
     NO_LOCAL_LIBUNWIND := 1
   else
     have_libunwind := 1
Signature · 1 line
2.48.1
maintainer
#1 lore raw
Quoted 89 lines · Arnaldo Carvalho de Melo

The tools/build/feature/test-all.c file tries to detect the expected, most common set of libraries/features we expect to have available to build perf with.

At some point libunwind was deemed not to be part of that set of libraries, but the patches making it to be opt-in ended up forgetting some details, fix one more.

Testing it:

  $ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
  $ rpm -q libunwind-devel
  libunwind-devel-1.8.0-3.fc40.x86_64
  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
  ...                               libunwind: [ on  ]
    CC      /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/arch/x86/util/unwind-libunwind.o
    CC      /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
    CC      /tmp/build/perf-tools-next/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/util/unwind-libunwind-local.o
    CC      /tmp/build/perf-tools-next/util/unwind-libunwind.o
	  libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f615a549000)
	  libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f615a52f000)
  $ sudo rpm -e libunwind-devel
  $ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
  Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
  ...                               libunwind: [ OFF ]
    CC      /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/arch/x86/util/unwind-libdw.o
    CC      /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
    CC      /tmp/build/perf-tools-next/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/util/unwind-libdw.o
  $

Should be in a separate patch, but tired now, so also adding a message about the need to use LIBUNWIND=1 in the output when its not available, so done here as well.

So, now when the devel files are not available we get:

  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
  Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR and set LIBUNWIND=1 in the make command line as it is opt-in now
  ...                               libunwind: [ OFF ]
  $
Fixes 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than opt-out")
Cc Adrian Hunter <[email protected]>
Cc Dmitry Vyukov <[email protected]>
Cc Ian Rogers <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc James Clark <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/build/Makefile.feature | 1 -
 tools/perf/Makefile.config   | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)
tools/build/Makefile.feature +0 -1
index 1931b6321314684c..54c8adfb94662c03 100644
@@ -87,7 +87,6 @@ FEATURE_TESTS_BASIC :=                  \
         libtracefs                      \
         libcpupower                     \
         libcrypto                       \
-        libunwind                       \
         pthread-attr-setaffinity-np     \
         pthread-barrier     		\
         reallocarray                    \
tools/perf/Makefile.config +2 -0
index eea95c6c0c71f76e..8ff1d8ade73fc061 100644
@@ -624,6 +624,8 @@ endif
 ifndef NO_LIBUNWIND
   have_libunwind :=
 
+  $(call feature_check,libunwind)
+
   $(call feature_check,libunwind-x86)
   ifeq ($(feature-libunwind-x86), 1)
     $(call detected,CONFIG_LIBUNWIND_X86)

tools/perf/Makefile.config ifndef NO_LIBUNWIND · line 653

Quoted 5 lines
tools/perf/Makefile.config +1 -1
@@ -648,7 +650,7 @@ ifndef NO_LIBUNWIND
   endif
 
   ifneq ($(feature-libunwind), 1)
-    $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR)
+    $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR and set LIBUNWIND=1 in the make command line as it is opt-in now)

I think this message is only visible if users already give LIBUNWIND=1.

Thanks,
Namhyung

Quoted 6 lines
tools/perf/Makefile.config +0 -0
     NO_LOCAL_LIBUNWIND := 1
   else
     have_libunwind := 1
Signature · 1 line
2.48.1
author maintainer
#2 lore raw
Quoted 92 lines · Namhyung Kim
Quoted 90 lines · Arnaldo Carvalho de Melo

The tools/build/feature/test-all.c file tries to detect the expected, most common set of libraries/features we expect to have available to build perf with.

At some point libunwind was deemed not to be part of that set of libraries, but the patches making it to be opt-in ended up forgetting some details, fix one more.

Testing it:

  $ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
  $ rpm -q libunwind-devel
  libunwind-devel-1.8.0-3.fc40.x86_64
  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
  ...                               libunwind: [ on  ]
    CC      /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/arch/x86/util/unwind-libunwind.o
    CC      /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
    CC      /tmp/build/perf-tools-next/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/util/unwind-libunwind-local.o
    CC      /tmp/build/perf-tools-next/util/unwind-libunwind.o
	  libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f615a549000)
	  libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f615a52f000)
  $ sudo rpm -e libunwind-devel
  $ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
  Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
  ...                               libunwind: [ OFF ]
    CC      /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/arch/x86/util/unwind-libdw.o
    CC      /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
    CC      /tmp/build/perf-tools-next/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/util/unwind-libdw.o
  $

Should be in a separate patch, but tired now, so also adding a message about the need to use LIBUNWIND=1 in the output when its not available, so done here as well.

So, now when the devel files are not available we get:

  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
  Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR and set LIBUNWIND=1 in the make command line as it is opt-in now
  ...                               libunwind: [ OFF ]
  $
Fixes 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than opt-out")
Cc Adrian Hunter <[email protected]>
Cc Dmitry Vyukov <[email protected]>
Cc Ian Rogers <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc James Clark <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/build/Makefile.feature | 1 -
 tools/perf/Makefile.config   | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)
tools/build/Makefile.feature +0 -1
index 1931b6321314684c..54c8adfb94662c03 100644
@@ -87,7 +87,6 @@ FEATURE_TESTS_BASIC :=                  \
         libtracefs                      \
         libcpupower                     \
         libcrypto                       \
-        libunwind                       \
         pthread-attr-setaffinity-np     \
         pthread-barrier     		\
         reallocarray                    \
tools/perf/Makefile.config +2 -0
index eea95c6c0c71f76e..8ff1d8ade73fc061 100644
@@ -624,6 +624,8 @@ endif
 ifndef NO_LIBUNWIND
   have_libunwind :=
 
+  $(call feature_check,libunwind)
+
   $(call feature_check,libunwind-x86)
   ifeq ($(feature-libunwind-x86), 1)
     $(call detected,CONFIG_LIBUNWIND_X86)
@@ -648,7 +650,7 @@ ifndef NO_LIBUNWIND
   endif
Quoted 5 lines

tools/perf/Makefile.config ifndef NO_LIBUNWIND · line 653

Quoted 3 lines
tools/perf/Makefile.config +1 -1
   ifneq ($(feature-libunwind), 1)
-    $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR)
+    $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR and set LIBUNWIND=1 in the make command line as it is opt-in now)

I think this message is only visible if users already give LIBUNWIND=1.

Doh, indeed, I got confused with that NO_LIBUNWIND=1 thing.

In the end the way we made libunwind opt-in is confusing, I cooked up a patch for 'perf -vv' (that is a shorthand for 'perf version --build-options, to tell the user, while we don't completely remove libunwind support from perf, as the one present in elfutils is better.

Not to confuse people that were used to having it enabled and try to enable it we need something like:

⬢ [acme@toolbox perf-tools-next]$ perf -vv | grep libunwind
libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT ( tip: Deprecated, use LIBUNWIND=1 and install libunwind-dev[el] to use with it )
⬢ [acme@toolbox perf-tools-next]$ perf version --build
perf version 6.15.rc1.g113e3df8ccc5

                   aio: [ on  ]  # HAVE_AIO_SUPPORT
                   bpf: [ on  ]  # HAVE_LIBBPF_SUPPORT
         bpf_skeletons: [ on  ]  # HAVE_BPF_SKEL
            debuginfod: [ OFF ]  # HAVE_DEBUGINFOD_SUPPORT
                 dwarf: [ on  ]  # HAVE_LIBDW_SUPPORT
    dwarf_getlocations: [ on  ]  # HAVE_LIBDW_SUPPORT
          dwarf-unwind: [ on  ]  # HAVE_DWARF_UNWIND_SUPPORT
              auxtrace: [ on  ]  # HAVE_AUXTRACE_SUPPORT
                libbfd: [ OFF ]  # HAVE_LIBBFD_SUPPORT
           libcapstone: [ on  ]  # HAVE_LIBCAPSTONE_SUPPORT
             libcrypto: [ on  ]  # HAVE_LIBCRYPTO_SUPPORT
    libdw-dwarf-unwind: [ on  ]  # HAVE_LIBDW_SUPPORT
                libelf: [ on  ]  # HAVE_LIBELF_SUPPORT
               libnuma: [ on  ]  # HAVE_LIBNUMA_SUPPORT
            libopencsd: [ on  ]  # HAVE_CSTRACE_SUPPORT
               libperl: [ on  ]  # HAVE_LIBPERL_SUPPORT
               libpfm4: [ on  ]  # HAVE_LIBPFM
             libpython: [ on  ]  # HAVE_LIBPYTHON_SUPPORT
              libslang: [ on  ]  # HAVE_SLANG_SUPPORT
         libtraceevent: [ on  ]  # HAVE_LIBTRACEEVENT
             libunwind: [ OFF ]  # HAVE_LIBUNWIND_SUPPORT ( tip: Deprecated, use LIBUNWIND=1 and install libunwind-dev[el] to use with it )
                  lzma: [ on  ]  # HAVE_LZMA_SUPPORT
numa_num_possible_cpus: [ on  ]  # HAVE_LIBNUMA_SUPPORT
                  zlib: [ on  ]  # HAVE_ZLIB_SUPPORT
                  zstd: [ on  ]  # HAVE_ZSTD_SUPPORT

⬢ [acme@toolbox perf-tools-next]$

This should be done for the other cases as when that feature isn't present.

Now looking how to wire this up with the messages emitted at build time, i.e. here:

Auto-detecting system features:

...                                   libdw: [ on  ]
...                                   glibc: [ on  ]
...                                  libbfd: [ on  ]
...                          libbfd-buildid: [ on  ]
...                                  libelf: [ on  ]
...                                 libnuma: [ on  ]
...                  numa_num_possible_cpus: [ on  ]
...                                 libperl: [ on  ]
...                               libpython: [ on  ]
...                               libcrypto: [ on  ]
...                               libunwind: [ OFF ]
...                             libcapstone: [ on  ]
...                               llvm-perf: [ on  ]
...                                    zlib: [ on  ]
...                                    lzma: [ on  ]
...                               get_cpuid: [ on  ]
...                                     bpf: [ on  ]
...                                  libaio: [ on  ]
...                                 libzstd: [ on  ]

INSTALL libsubcmd_headers

- Arnaldo

#3 lore raw
In reply to Arnaldo Carvalho de Melo
Quoted 26 lines · Arnaldo Carvalho de Melo

The tools/build/feature/test-all.c file tries to detect the expected, most common set of libraries/features we expect to have available to build perf with.

At some point libunwind was deemed not to be part of that set of libraries, but the patches making it to be opt-in ended up forgetting some details, fix one more.

Testing it:

  $ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
  $ rpm -q libunwind-devel
  libunwind-devel-1.8.0-3.fc40.x86_64
  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
  ...                               libunwind: [ on  ]
    CC      /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/arch/x86/util/unwind-libunwind.o
    CC      /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
    CC      /tmp/build/perf-tools-next/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/util/unwind-libunwind-local.o
    CC      /tmp/build/perf-tools-next/util/unwind-libunwind.o
	  libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f615a549000)
	  libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f615a52f000)
  $ sudo rpm -e libunwind-devel
  $ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
  $ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
Quoted 8 lines
  Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
  ...                               libunwind: [ OFF ]
    CC      /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/arch/x86/util/unwind-libdw.o
    CC      /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
    CC      /tmp/build/perf-tools-next/tests/dwarf-unwind.o
    CC      /tmp/build/perf-tools-next/util/unwind-libdw.o
  $

So I'm not sure whether this is related to my libunwind-OFF build message bugreport, but in case it is, with this patch applied I still get this message both before and after applying the patch:

... libunwind: [ OFF ]

Note: I did not add any LIBUNWIND parameters to the build, it's a standard 'make clean install' perf build:

  $ make clean install
  ...
  BUILD:   Doing 'make -j128' parallel build
  ...
  ...                               libunwind: [ OFF ]
  ...

All other feature messages indicate '[ on ]'.

It's on a fairly standard x86-64 Ubuntu 24.10 installation, with various development libraries installed. Let me know if you need any debug output or other information!

Thanks,

Ingo