board: starfive: handle compatible property in dynamic DT configuration
PATCH 1/1 board: starfive: handle compatible property in dynamic DT configuration
The difference between the StarFive VisionFive 2 1.2A and 1.3B boards is handled dynamically by looking at the PCB version in the EEPROM in order to have a single u-boot version for both versions of the board. While the "model" property is correctly handled, the "compatible" one is always the the one of version 1.3b.
This patch add support for dynamically configuring that property.
--- board/starfive/visionfive2/spl.c | 4 ++++ 1 file changed, 4 insertions(+)
board/starfive/visionfive2/spl.c +4 -0
@@ -61,11 +61,13 @@ static const struct starfive_vf2_pro starfive_verb[] = {void spl_fdt_fixup_version_a (void *fdt) { +static const char compat[] ="starfive,visionfive-2-v1.2a\0starfive,jh7110" ;u32 phandle;u8 i;int offset;int ret; +fdt_setprop (fdt,fdt_path_offset (fdt,"/" ),"compatible" , compat,sizeof (compat));fdt_setprop_string (fdt,fdt_path_offset (fdt,"/" ),"model" ,"StarFive VisionFive 2 v1.2A" );
@@ -106,11 +108,13 @@ void spl_fdt_fixup_version_a(void *fdt)void spl_fdt_fixup_version_b (void *fdt) { +static const char compat[] ="starfive,visionfive-2-v1.3b\0starfive,jh7110" ;u32 phandle;u8 i;int offset;int ret; +fdt_setprop (fdt,fdt_path_offset (fdt,"/" ),"compatible" , compat,sizeof (compat));fdt_setprop_string (fdt,fdt_path_offset (fdt,"/" ),"model" ,"StarFive VisionFive 2 v1.3B" );
Signature · 1 line
2.42.0
Gentle ping. Note that the maintainer address bounces, I am not sure it is still valid. Thanks
Quoted 51 lines · Aurelien Jarno
The difference between the StarFive VisionFive 2 1.2A and 1.3B boards is handled dynamically by looking at the PCB version in the EEPROM in order to have a single u-boot version for both versions of the board. While the "model" property is correctly handled, the "compatible" one is always the the one of version 1.3b.
This patch add support for dynamically configuring that property.
Fixes 9b7060bd15e7 ("riscv: dts: jh7110: Combine the board device tree files of 1.2A and 1.3B")Signed-off-by Aurelien Jarno <[email protected]>--- board/starfive/visionfive2/spl.c | 4 ++++ 1 file changed, 4 insertions(+)board/starfive/visionfive2/spl.c +4
-0@@ -61,11 +61,13 @@ static const struct starfive_vf2_pro starfive_verb[] = {void spl_fdt_fixup_version_a (void *fdt) { +static const char compat[] ="starfive,visionfive-2-v1.2a\0starfive,jh7110" ;u32 phandle;u8 i;int offset;int ret; +fdt_setprop (fdt,fdt_path_offset (fdt,"/" ),"compatible" , compat,sizeof (compat));fdt_setprop_string (fdt,fdt_path_offset (fdt,"/" ),"model" ,"StarFive VisionFive 2 v1.2A" );@@ -106,11 +108,13 @@ void spl_fdt_fixup_version_a(void *fdt)void spl_fdt_fixup_version_b (void *fdt) { +static const char compat[] ="starfive,visionfive-2-v1.3b\0starfive,jh7110" ;u32 phandle;u8 i;int offset;int ret; +fdt_setprop (fdt,fdt_path_offset (fdt,"/" ),"compatible" , compat,sizeof (compat));fdt_setprop_string (fdt,fdt_path_offset (fdt,"/" ),"model" ,"StarFive VisionFive 2 v1.3B" );Signature · 1 line
2.42.0
Signature · 2 lines
Aurelien Jarno GPG: 4096R/1DDD8C9B [email protected] http://aurel32.net
Quoted 6 lines · Aurelien Jarno
The difference between the StarFive VisionFive 2 1.2A and 1.3B boards is handled dynamically by looking at the PCB version in the EEPROM in order to have a single u-boot version for both versions of the board. While the "model" property is correctly handled, the "compatible" one is always the the one of version 1.3b.
Quoted 8 lines
This patch add support for dynamically configuring that property.
Fixes 9b7060bd15e7 ("riscv: dts: jh7110: Combine the board device tree files of 1.2A and 1.3B")Signed-off-by Aurelien Jarno <[email protected]>--- board/starfive/visionfive2/spl.c | 4 ++++ 1 file changed, 4 insertions(+)