Skip to contentSkip to conversation

Make UCSI on Dell Latitude work

PATCH In review Christian A. Ehrhardt 2 participants 8 messages Jan 7, 2024 – Jan 15, 2024

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover Make UCSI on Dell Latitude work

The UCSI interface on a Dell Latitude 5431 stops working after the first async event with:

GET_CONNECTOR_STATUS failed (-110)

The core problem is that when sending the ACK_CC_CI command to clear the connector status changed condition the PPM expects us to send anothr ack for the command completion condition. However, the UCSI spec states that no ack for the command completion is required when the command is ACK_CC_CI (or PPM_RESET).

There are various reports that suggest that several Dell laptops are affected by this problem. E.g. the kernel bugzilla has this report which is most likely an instance of this bug:

    https://bugzilla.kernel.org/show_bug.cgi?id=216426

This led me to the somewhat bold conclusion that the quirk should probably be applied to all Dell systems. However, I'm open to suggestions on how to proceed with this.

While debugging another issue was found that is present for all systems but only triggered with the quirk active: The ACK_CC_CI command to ack the connector status change is sent without any lock which allows for a race where this command is sent while another command is currently in progress.

The series consists of 4 changes:
- Add the missing lock around ucsi_acknowledge_connector_change. This change is a generic bugfix.
- Add infrastructure for quirks and a quirk override module parameter to the typec_ucsi module. There's at least one other change in the works that wants something similar here:

    https://lore.kernel.org/all/[email protected]/

Additionally, doing the dell quirk is a bit easier in the gereric UCSI code. The module parameter will allow users to fix things if the DMI matching goes wrong. Additionally, we can easily ask users to test different quirks without the need to recompile.
- Actually add the required quirk to ucsi.c.
- Finally, refactor DMI matching in ucsi_acpi.c and enable the new quirk for all DELL systems. The latter is kind of bold and I'm open to suggestings on how to proceed here.
I'm CC'ing [email protected] because this seems to be a list where Dell people are that might be able to provide more insight on this.

Christian A. Ehrhardt (4):
usb: ucsi: Add quirk infrastructure
usb: ucsi: Add missing ppm_lock
usb: ucsi: Quirk to ack a connector change ack cmd
usb: ucsi: Apply UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD to DELL systems

 .../admin-guide/kernel-parameters.txt         |  5 +++
 drivers/usb/typec/ucsi/ucsi.c                 | 21 ++++++++-
 drivers/usb/typec/ucsi/ucsi.h                 |  7 ++-
 drivers/usb/typec/ucsi/ucsi_acpi.c            | 45 ++++++++++++++++---
 drivers/usb/typec/ucsi/ucsi_ccg.c             |  2 +-
 drivers/usb/typec/ucsi/ucsi_glink.c           |  2 +-
 drivers/usb/typec/ucsi/ucsi_stm32g0.c         |  2 +-
 7 files changed, 73 insertions(+), 11 deletions(-)
Signature · 1 line
2.40.1
#1 lore raw

PATCH 1/4 usb: ucsi: Add missing ppm_lock

Calling ->sync_write must be done while holding the PPM lock as the mailbox logic does not support concurrent commands.

Add a missing lock around the only call to ucsi_acknowledge_connector_change. Additionally, warn in ucsi_acpi.c if a command is started while the COMMAND_PENDING bit is already set.

---
 drivers/usb/typec/ucsi/ucsi.c      | 2 ++
 drivers/usb/typec/ucsi/ucsi_acpi.c | 2 ++
 2 files changed, 4 insertions(+)
drivers/usb/typec/ucsi/ucsi.c +2 -0
index 61b64558f96c..8f9dff993b3d 100644
@@ -935,7 +935,9 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 
 	clear_bit(EVENT_PENDING, &con->ucsi->flags);
 
+	mutex_lock(&ucsi->ppm_lock);
 	ret = ucsi_acknowledge_connector_change(ucsi);
+	mutex_unlock(&ucsi->ppm_lock);
 	if (ret)
 		dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret);
 
drivers/usb/typec/ucsi/ucsi_acpi.c +2 -0
index 6bbf490ac401..8062d0a4b523 100644
@@ -75,6 +75,8 @@ static int ucsi_acpi_sync_write(struct ucsi *ucsi, unsigned int offset,
 	struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
 	int ret;
 
+	WARN_ON(test_bit(COMMAND_PENDING, &ua->flags));
+
 	set_bit(COMMAND_PENDING, &ua->flags);
 
 	ret = ucsi_acpi_async_write(ucsi, offset, val, val_len);
Signature · 1 line
2.40.1
#2 lore raw

PATCH 2/4 usb: ucsi: Add quirk infrastructure

In reply to Christian A. Ehrhardt

Allow bus drivers to specify quirks for the UCSI core on attach. Allow the user to override the quirks on the command line.

---
 Documentation/admin-guide/kernel-parameters.txt |  5 +++++
 drivers/usb/typec/ucsi/ucsi.c                   | 12 +++++++++++-
 drivers/usb/typec/ucsi/ucsi.h                   |  6 +++++-
 drivers/usb/typec/ucsi/ucsi_acpi.c              |  2 +-
 drivers/usb/typec/ucsi/ucsi_ccg.c               |  2 +-
 drivers/usb/typec/ucsi/ucsi_glink.c             |  2 +-
 drivers/usb/typec/ucsi/ucsi_stm32g0.c           |  2 +-
 7 files changed, 25 insertions(+), 6 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +5 -0
index 0a6a4b7f7a3b..fd8152dd4450 100644
@@ -6783,6 +6783,11 @@
 			<port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
 			See also Documentation/input/devices/joystick-parport.rst
 
+	typec_ucsi.quirks=	[USB]
+			A hex value specifying the quirks to enable for
+			the USB Type-C connector system software interface
+			driver. This overrides auto detected quirks.
+
 	udbg-immortal	[PPC] When debugging early kernel crashes that
 			happen after console_init() and before a proper
 			console driver takes over, this boot options might
drivers/usb/typec/ucsi/ucsi.c +11 -1
index 8f9dff993b3d..00b23292f46f 100644
@@ -36,6 +36,11 @@
  */
 #define UCSI_SWAP_TIMEOUT_MS	5000
 
+/* Override for auto detected quirks. */
+static unsigned int quirk_override = ~0U;
+module_param_named(quirks, quirk_override, uint, S_IRUGO);
+MODULE_PARM_DESC(quirks, "Override quirks for UCSI");
+
 static int ucsi_acknowledge_command(struct ucsi *ucsi)
 {
 	u64 ctrl;
@@ -1507,7 +1512,8 @@ EXPORT_SYMBOL_GPL(ucsi_set_drvdata);
  * @dev: Device interface to the PPM (Platform Policy Manager)
  * @ops: I/O routines
  */
-struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops)
+struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops,
+			 unsigned int quirks)
 {
 	struct ucsi *ucsi;
 
@@ -1523,6 +1529,10 @@ struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops)
 	mutex_init(&ucsi->ppm_lock);
 	ucsi->dev = dev;
 	ucsi->ops = ops;
+	if (quirk_override != ~0U)
+		ucsi->quirks = quirk_override;
+	else
+		ucsi->quirks = quirks;
 
 	return ucsi;
 }
drivers/usb/typec/ucsi/ucsi.h +5 -1
index 474315a72c77..5e6d2225c9c8 100644
@@ -57,7 +57,8 @@ struct ucsi_operations {
 				struct ucsi_altmode *updated);
 };
 
-struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops);
+struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops,
+			 unsigned int quirks);
 void ucsi_destroy(struct ucsi *ucsi);
 int ucsi_register(struct ucsi *ucsi);
 void ucsi_unregister(struct ucsi *ucsi);
@@ -317,6 +318,9 @@ struct ucsi {
 #define EVENT_PENDING	0
 #define COMMAND_PENDING	1
 #define ACK_PENDING	2
+
+	/* Enabled quirks. */
+	unsigned int quirks;
 };
 
 #define UCSI_MAX_SVID		5
drivers/usb/typec/ucsi/ucsi_acpi.c +1 -1
index 8062d0a4b523..78a0d13584ad 100644
@@ -185,7 +185,7 @@ static int ucsi_acpi_probe(struct platform_device *pdev)
 	if (dmi_check_system(zenbook_dmi_id))
 		ops = &ucsi_zenbook_ops;
 
-	ua->ucsi = ucsi_create(&pdev->dev, ops);
+	ua->ucsi = ucsi_create(&pdev->dev, ops, 0);
 	if (IS_ERR(ua->ucsi))
 		return PTR_ERR(ua->ucsi);
 
drivers/usb/typec/ucsi/ucsi_ccg.c +1 -1
index 449c125f6f87..d491b6547fc3 100644
@@ -1387,7 +1387,7 @@ static int ucsi_ccg_probe(struct i2c_client *client)
 	if (uc->info.mode & CCG_DEVINFO_PDPORTS_MASK)
 		uc->port_num++;
 
-	uc->ucsi = ucsi_create(dev, &ucsi_ccg_ops);
+	uc->ucsi = ucsi_create(dev, &ucsi_ccg_ops, 0);
 	if (IS_ERR(uc->ucsi))
 		return PTR_ERR(uc->ucsi);
 
drivers/usb/typec/ucsi/ucsi_glink.c +1 -1
index db6e248f8208..49587960b6a3 100644
@@ -318,7 +318,7 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
 	init_completion(&ucsi->sync_ack);
 	mutex_init(&ucsi->lock);
 
-	ucsi->ucsi = ucsi_create(dev, &pmic_glink_ucsi_ops);
+	ucsi->ucsi = ucsi_create(dev, &pmic_glink_ucsi_ops, 0);
 	if (IS_ERR(ucsi->ucsi))
 		return PTR_ERR(ucsi->ucsi);
 
drivers/usb/typec/ucsi/ucsi_stm32g0.c +1 -1
index 93d7806681cf..269caa3b4e84 100644
@@ -641,7 +641,7 @@ static int ucsi_stm32g0_probe(struct i2c_client *client)
 	init_completion(&g0->complete);
 	i2c_set_clientdata(client, g0);
 
-	g0->ucsi = ucsi_create(dev, &ucsi_stm32g0_ops);
+	g0->ucsi = ucsi_create(dev, &ucsi_stm32g0_ops, 0);
 	if (IS_ERR(g0->ucsi))
 		return PTR_ERR(g0->ucsi);
 
Signature · 1 line
2.40.1
maintainer
#3 lore raw

Re: [PATCH 2/4] usb: ucsi: Add quirk infrastructure

Quoted 20 lines · Christian A. Ehrhardt

Allow bus drivers to specify quirks for the UCSI core on attach. Allow the user to override the quirks on the command line.

---
 Documentation/admin-guide/kernel-parameters.txt |  5 +++++
 drivers/usb/typec/ucsi/ucsi.c                   | 12 +++++++++++-
 drivers/usb/typec/ucsi/ucsi.h                   |  6 +++++-
 drivers/usb/typec/ucsi/ucsi_acpi.c              |  2 +-
 drivers/usb/typec/ucsi/ucsi_ccg.c               |  2 +-
 drivers/usb/typec/ucsi/ucsi_glink.c             |  2 +-
 drivers/usb/typec/ucsi/ucsi_stm32g0.c           |  2 +-
 7 files changed, 25 insertions(+), 6 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +0 -0
index 0a6a4b7f7a3b..fd8152dd4450 100644

Documentation/admin-guide/kernel-parameters.txt line 6789

Quoted 7 lines
Documentation/admin-guide/kernel-parameters.txt +4 -0
@@ -6783,6 +6783,11 @@
 			<port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
 			See also Documentation/input/devices/joystick-parport.rst
 
+	typec_ucsi.quirks=	[USB]
+			A hex value specifying the quirks to enable for
+			the USB Type-C connector system software interface
+			driver. This overrides auto detected quirks.

New module parameters are not going to be accepted.

Please just fix the issue with Dell's first like I proposed, and then you can start thinking about the infra for the quirks.

thanks,

Signature · 1 line
heikki
#4 lore raw

PATCH 3/4 usb: ucsi: Quirk to ack a connector change ack cmd

In reply to Christian A. Ehrhardt

The PPM on some Dell laptops seems to expect that the ACK_CC_CI command to clear the connector change notification is in turn followed by another ACK_CC_CI to acknowledge the ACK_CC_CI command itself. This is in violation of the UCSI spec that states:

"The only notification that is not acknowledged by the OPM is
the command completion notification for the ACK_CC_CI or the PPM_RESET command."

Add a quirk to send this ack anyway.

---
 drivers/usb/typec/ucsi/ucsi.c | 7 ++++++-
 drivers/usb/typec/ucsi/ucsi.h | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)
drivers/usb/typec/ucsi/ucsi.c +6 -1
index 00b23292f46f..8718836b6aba 100644
@@ -54,11 +54,16 @@ static int ucsi_acknowledge_command(struct ucsi *ucsi)
 static int ucsi_acknowledge_connector_change(struct ucsi *ucsi)
 {
 	u64 ctrl;
+	int ret;
 
 	ctrl = UCSI_ACK_CC_CI;
 	ctrl |= UCSI_ACK_CONNECTOR_CHANGE;
 
-	return ucsi->ops->sync_write(ucsi, UCSI_CONTROL, &ctrl, sizeof(ctrl));
+	ret = ucsi->ops->sync_write(ucsi, UCSI_CONTROL, &ctrl, sizeof(ctrl));
+	if (ret == 0 && ucsi->quirks & UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD)
+		ret = ucsi_acknowledge_command(ucsi);
+
+	return ret;
 }
 
 static int ucsi_exec_command(struct ucsi *ucsi, u64 command);
drivers/usb/typec/ucsi/ucsi.h +1 -0
index 5e6d2225c9c8..9ea2143776cf 100644
@@ -321,6 +321,7 @@ struct ucsi {
 
 	/* Enabled quirks. */
 	unsigned int quirks;
+#define UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD BIT(0)
 };
 
 #define UCSI_MAX_SVID		5
Signature · 1 line
2.40.1
#5 lore raw

PATCH 4/4 usb: ucsi: Apply UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD to Dell systems

In reply to Christian A. Ehrhardt

Apply the UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD to all Dell systems.

There are various reports that ucsi does not work on Dell systems with "GET_CONNECTOR_STATUS failed". At least some of these are most likely due to the need for this quirk.

If the logic is wrong users can still use the new quirk override for the typec_ucsi module to disable the quirk.

---
 drivers/usb/typec/ucsi/ucsi_acpi.c | 36 +++++++++++++++++++++++++-----
 1 file changed, 31 insertions(+), 5 deletions(-)
drivers/usb/typec/ucsi/ucsi_acpi.c +31 -5
index 78a0d13584ad..690d5e55bdc4 100644
@@ -27,6 +27,11 @@ struct ucsi_acpi {
 	u64 cmd;
 };
 
+struct ucsi_acpi_attach_data {
+	const struct ucsi_operations *ops;
+	unsigned int quirks;
+};
+
 static int ucsi_acpi_dsm(struct ucsi_acpi *ua, int func)
 {
 	union acpi_object *obj;
@@ -121,12 +126,30 @@ static const struct ucsi_operations ucsi_zenbook_ops = {
 	.async_write = ucsi_acpi_async_write
 };
 
-static const struct dmi_system_id zenbook_dmi_id[] = {
+static const struct ucsi_acpi_attach_data ucsi_acpi_default_attach_data = {
+	.ops = &ucsi_acpi_ops,
+	.quirks = 0
+};
+
+static const struct dmi_system_id ucsi_acpi_quirks[] = {
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"),
 		},
+		.driver_data = &(struct ucsi_acpi_attach_data) {
+			.ops = &ucsi_zenbook_ops,
+			.quirks = 0
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+		},
+		.driver_data = &(struct ucsi_acpi_attach_data) {
+			.ops = &ucsi_acpi_ops,
+			.quirks = UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD
+		},
 	},
 	{ }
 };
@@ -152,7 +175,8 @@ static void ucsi_acpi_notify(acpi_handle handle, u32 event, void *data)
 static int ucsi_acpi_probe(struct platform_device *pdev)
 {
 	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
-	const struct ucsi_operations *ops = &ucsi_acpi_ops;
+	const struct dmi_system_id *id;
+	const struct ucsi_acpi_attach_data *attach;
 	struct ucsi_acpi *ua;
 	struct resource *res;
 	acpi_status status;
@@ -182,10 +206,12 @@ static int ucsi_acpi_probe(struct platform_device *pdev)
 	init_completion(&ua->complete);
 	ua->dev = &pdev->dev;
 
-	if (dmi_check_system(zenbook_dmi_id))
-		ops = &ucsi_zenbook_ops;
+	attach = &ucsi_acpi_default_attach_data;
+	id = dmi_first_match(ucsi_acpi_quirks);
+	if (id)
+		attach = id->driver_data;
 
-	ua->ucsi = ucsi_create(&pdev->dev, ops, 0);
+	ua->ucsi = ucsi_create(&pdev->dev, attach->ops, attach->quirks);
 	if (IS_ERR(ua->ucsi))
 		return PTR_ERR(ua->ucsi);
 
Signature · 1 line
2.40.1
maintainer
#6 lore raw

Re: [PATCH 4/4] usb: ucsi: Apply UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD to Dell systems

Hi Christian,

Quoted 48 lines · Christian A. Ehrhardt

Apply the UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD to all Dell systems.

There are various reports that ucsi does not work on Dell systems with "GET_CONNECTOR_STATUS failed". At least some of these are most likely due to the need for this quirk.

If the logic is wrong users can still use the new quirk override for the typec_ucsi module to disable the quirk.

---
 drivers/usb/typec/ucsi/ucsi_acpi.c | 36 +++++++++++++++++++++++++-----
 1 file changed, 31 insertions(+), 5 deletions(-)
drivers/usb/typec/ucsi/ucsi_acpi.c +13 -1
index 78a0d13584ad..690d5e55bdc4 100644
@@ -27,6 +27,11 @@ struct ucsi_acpi {
 	u64 cmd;
 };
 
+struct ucsi_acpi_attach_data {
+	const struct ucsi_operations *ops;
+	unsigned int quirks;
+};
+
 static int ucsi_acpi_dsm(struct ucsi_acpi *ua, int func)
 {
 	union acpi_object *obj;
@@ -121,12 +126,30 @@ static const struct ucsi_operations ucsi_zenbook_ops = {
 	.async_write = ucsi_acpi_async_write
 };
 
-static const struct dmi_system_id zenbook_dmi_id[] = {
+static const struct ucsi_acpi_attach_data ucsi_acpi_default_attach_data = {
+	.ops = &ucsi_acpi_ops,
+	.quirks = 0
+};
+
+static const struct dmi_system_id ucsi_acpi_quirks[] = {
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"),
 		},
+		.driver_data = &(struct ucsi_acpi_attach_data) {
+			.ops = &ucsi_zenbook_ops,

drivers/usb/typec/ucsi/ucsi_acpi.c static const struct ucsi_operations ucsi_zenbook_ops = { · line 151

Quoted 10 lines
drivers/usb/typec/ucsi/ucsi_acpi.c +10 -0
+			.quirks = 0
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+		},
+		.driver_data = &(struct ucsi_acpi_attach_data) {
+			.ops = &ucsi_acpi_ops,
+			.quirks = UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD

Please don't add any more quirk flags like that for single user (you may never have more than the one user for it). Let's just first handle this with only Dell's like I proposed.

If there are other platforms that need the same quirk, then we can start looking at how to share the quirk.

thanks,

Signature · 1 line
heikki
#7 lore raw

Re: [PATCH 4/4] usb: ucsi: Apply UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD to Dell systems

Hi Heikki,

Quoted 66 lines · Heikki Krogerus

Hi Christian,

Quoted 48 lines · Christian A. Ehrhardt

Apply the UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD to all Dell systems.

There are various reports that ucsi does not work on Dell systems with "GET_CONNECTOR_STATUS failed". At least some of these are most likely due to the need for this quirk.

If the logic is wrong users can still use the new quirk override for the typec_ucsi module to disable the quirk.

---
 drivers/usb/typec/ucsi/ucsi_acpi.c | 36 +++++++++++++++++++++++++-----
 1 file changed, 31 insertions(+), 5 deletions(-)
drivers/usb/typec/ucsi/ucsi_acpi.c +13 -1
index 78a0d13584ad..690d5e55bdc4 100644
@@ -27,6 +27,11 @@ struct ucsi_acpi {
 	u64 cmd;
 };
 
+struct ucsi_acpi_attach_data {
+	const struct ucsi_operations *ops;
+	unsigned int quirks;
+};
+
 static int ucsi_acpi_dsm(struct ucsi_acpi *ua, int func)
 {
 	union acpi_object *obj;
@@ -121,12 +126,30 @@ static const struct ucsi_operations ucsi_zenbook_ops = {
 	.async_write = ucsi_acpi_async_write
 };
 
-static const struct dmi_system_id zenbook_dmi_id[] = {
+static const struct ucsi_acpi_attach_data ucsi_acpi_default_attach_data = {
+	.ops = &ucsi_acpi_ops,
+	.quirks = 0
+};
+
+static const struct dmi_system_id ucsi_acpi_quirks[] = {
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"),
 		},
+		.driver_data = &(struct ucsi_acpi_attach_data) {
+			.ops = &ucsi_zenbook_ops,

drivers/usb/typec/ucsi/ucsi_acpi.c static const struct ucsi_operations ucsi_zenbook_ops = { · line 151

Quoted 10 lines
drivers/usb/typec/ucsi/ucsi_acpi.c +10 -0
+			.quirks = 0
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+		},
+		.driver_data = &(struct ucsi_acpi_attach_data) {
+			.ops = &ucsi_acpi_ops,
+			.quirks = UCSI_ACK_CONNECTOR_CHANGE_ACK_CMD

Please don't add any more quirk flags like that for single user (you may never have more than the one user for it). Let's just first handle this with only Dell's like I proposed.

Quoted 2 lines

If there are other platforms that need the same quirk, then we can start looking at how to share the quirk.

Ok, thanks for the feedback. Will do.

However, please note that it is not clear if it is all or only some dells that need this. This is the prime reason why I was looking for a way to enable/disable the quirk.

regards Christian