cpuidle: Handle TIF_NR_POLLING on behalf of polling idle states
Subsystems (7)
cover cpuidle: Handle TIF_NR_POLLING on behalf of polling idle states
The TIF_NR_POLLING handling against polling idle states (mwait and also software polling) is a bit messy, with quite some wasted cycles spent on useless atomic operations. This is a try to consolidate this state handling from the cpuidle core.
Frederic Weisbecker (4):
x86: Add a comment about the "magic" behind shadow sti before mwait
cpuidle: Remove unnecessary current_clr_polling_and_test() from
haltpoll
cpuidle: s/CPUIDLE_FLAG_POLLING/CPUIDLE_FLAG_POLLING_SOFT
cpuidle: Handle TIF_NR_POLLING on behalf of software polling idle
states
Peter Zijlstra (3):
x86: Fix CPUIDLE_FLAG_IRQ_ENABLE leaking timer reprogram
cpuidle: Introduce CPUIDLE_FLAG_POLLING_HARD
cpuidle: Handle TIF_NR_POLLING on behalf of CPUIDLE_FLAG_POLLING_HARD
states
Documentation/driver-api/pm/cpuidle.rst | 2 +- arch/x86/include/asm/mwait.h | 23 +++++++++++--- drivers/acpi/processor_idle.c | 3 ++ drivers/cpuidle/cpuidle-haltpoll.c | 5 +--- drivers/cpuidle/cpuidle-powernv.c | 12 +------- drivers/cpuidle/cpuidle-pseries.c | 15 ++-------- drivers/cpuidle/cpuidle.c | 22 +++++++++++++- drivers/cpuidle/governors/ladder.c | 4 +-- drivers/cpuidle/governors/menu.c | 8 ++--- drivers/cpuidle/governors/teo.c | 8 ++--- drivers/cpuidle/poll_state.c | 32 ++++++++------------ drivers/idle/intel_idle.c | 24 +++++++-------- include/linux/cpuidle.h | 3 +- include/linux/sched/idle.h | 7 ++++- kernel/sched/idle.c | 40 +++++++++---------------- 15 files changed, 104 insertions(+), 104 deletions(-)
Signature · 1 line
2.42.1
PATCH 1/7 x86: Fix CPUIDLE_FLAG_IRQ_ENABLE leaking timer reprogram
From: Peter Zijlstra <[email protected]>
intel_idle_irq() re-enables IRQs very early. As a result, an interrupt may fire before mwait() is eventually called. If such an interrupt queues a timer, it may go unnoticed until mwait returns and the idle loop handles the tick re-evaluation. And monitoring TIF_NEED_RESCHED doesn't help because a local timer enqueue doesn't set that flag.
The issue is mitigated by the fact that this idle handler is only invoked for shallow C-states when, presumably, the next tick is supposed to be close enough. There may still be rare cases though when the next tick is far away and the selected C-state is shallow, resulting in a timer getting ignored for a while.
Fix this with using sti_mwait() whose IRQ-reenablement only triggers upon calling mwait(), dealing with the race while keeping the interrupt latency within acceptable bounds.
--- arch/x86/include/asm/mwait.h | 11 +++++++++-- drivers/idle/intel_idle.c | 19 +++++++------------ 2 files changed, 16 insertions(+), 14 deletions(-)
arch/x86/include/asm/mwait.h +9 -2
@@ -115,8 +115,15 @@ static __always_inline void mwait_idle_with_hints(unsigned long eax, unsigned lo }__monitor ((void *)¤t_thread_info ()->flags,0 ,0 ); -if (!need_resched ()) -__mwait (eax, ecx); + +if (!need_resched ()) { +if (ecx &1 ) { +__mwait (eax, ecx); + }else { +__sti_mwait (eax, ecx); +raw_local_irq_disable (); + } + } }current_clr_polling (); }
drivers/idle/intel_idle.c +7 -12
@@ -131,11 +131,12 @@ static unsigned int mwait_substates __initdata;#define MWAIT2flg (eax) ((eax & 0xFF) << 24) static __always_inline int __intel_idle(struct cpuidle_device *dev, -struct cpuidle_driver *drv,int index) +struct cpuidle_driver *drv, +int index,bool irqoff) {struct cpuidle_state *state = &drv->states[index];unsigned long eax =flg2MWAIT (state->flags); -unsigned long ecx =1 ;/* break on interrupt flag */ +unsigned long ecx =1 *irqoff;/* break on interrupt flag */ mwait_idle_with_hints (eax, ecx);
@@ -159,19 +160,13 @@ static __always_inline int __intel_idle(struct cpuidle_device *dev, static __cpuidle int intel_idle(struct cpuidle_device *dev,struct cpuidle_driver *drv,int index) { -return __intel_idle (dev, drv, index); +return __intel_idle (dev, drv, index, true); } static __cpuidle int intel_idle_irq(struct cpuidle_device *dev,struct cpuidle_driver *drv,int index) { -int ret; - -raw_local_irq_enable (); - ret =__intel_idle (dev, drv, index); -raw_local_irq_disable (); - -return ret; +return __intel_idle (dev, drv, index, false); } static __cpuidle int intel_idle_ibrs(struct cpuidle_device *dev,
@@ -184,7 +179,7 @@ static __cpuidle int intel_idle_ibrs(struct cpuidle_device *dev,if (smt_active)__update_spec_ctrl (0 ); - ret =__intel_idle (dev, drv, index); + ret =__intel_idle (dev, drv, index, true);if (smt_active)__update_spec_ctrl (spec_ctrl);
@@ -196,7 +191,7 @@ static __cpuidle int intel_idle_xstate(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) {fpu_idle_fpregs (); -return __intel_idle (dev, drv, index); +return __intel_idle (dev, drv, index, true); }/**
Signature · 1 line
2.42.1
PATCH 2/7 x86: Add a comment about the "magic" behind shadow sti before mwait
In reply to Frederic WeisbeckerAdd a note to make sure we never miss and break the requirements behind it.
--- arch/x86/include/asm/mwait.h | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/x86/include/asm/mwait.h +9 -0
@@ -87,6 +87,15 @@ static __always_inline void __mwaitx(unsigned long eax, unsigned long ebx, :: "a" (eax), "b" (ebx), "c" (ecx)); } +/* +* Re-enable interrupts right upon calling mwait in such a way that +* no interrupt can fire _before_ the execution of mwait, ie: no +* instruction must be placed between "sti" and "mwait". +* +* This is necessary because if an interrupt queues a timer before +* executing mwait, it would otherwise go unnoticed and the next tick +* would not be reprogrammed accordingly before mwait ever wakes up. +*/ static __always_inline void __sti_mwait(unsigned long eax, unsigned long ecx) {mds_idle_clear_cpu_buffers ();
Signature · 1 line
2.42.1
PATCH 3/7 cpuidle: Remove unnecessary current_clr_polling_and_test() from haltpoll
In reply to Frederic WeisbeckerWhen cpuidle drivers ->enter() callback are called, the TIF_NR_POLLING flag is cleared already and TIF_NEED_RESCHED checked by call_cpuidle().
Therefore calling current_clr_polling_and_test() is redundant here and further setting of TIF_NEED_RESCHED will result in an IPI and thus an idle loop exit. This call can be safely removed.
--- drivers/cpuidle/cpuidle-haltpoll.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/cpuidle/cpuidle-haltpoll.c +1 -4
@@ -28,11 +28,8 @@ static enum cpuhp_state haltpoll_hp_state;static int default_enter_idle (struct cpuidle_device *dev,struct cpuidle_driver *drv,int index) { -if (current_clr_polling_and_test ()) { -local_irq_enable (); -return index; - }arch_cpu_idle (); +return index; }
Signature · 1 line
2.42.1
PATCH 4/7 cpuidle: s/CPUIDLE_FLAG_POLLING/CPUIDLE_FLAG_POLLING_SOFT
In reply to Frederic WeisbeckerIn order to further distinguish software and hardware TIF_NEED_RESCHED polling cpuidle states, rename CPUIDLE_FLAG_POLLING to CPUIDLE_FLAG_POLLING_SOFT before introducing CPUIDLE_FLAG_POLLING_HARD and tag mwait users with it.
This will allow cpuidle core to manage TIF_NR_POLLING on behalf of all kinds of TIF_NEED_RESCHED polling states while keeping a necessary distinction for the governors between software loops polling on TIF_NEED_RESCHED and hardware monitored writes to thread flags.
--- Documentation/driver-api/pm/cpuidle.rst | 2 +- drivers/cpuidle/cpuidle-powernv.c | 2 +- drivers/cpuidle/cpuidle-pseries.c | 4 ++-- drivers/cpuidle/governors/ladder.c | 4 ++-- drivers/cpuidle/governors/menu.c | 8 ++++---- drivers/cpuidle/governors/teo.c | 8 ++++---- drivers/cpuidle/poll_state.c | 2 +- include/linux/cpuidle.h | 2 +- 8 files changed, 16 insertions(+), 16 deletions(-)
Documentation/driver-api/pm/cpuidle.rst +1 -1
@@ -192,7 +192,7 @@ governors for computations related to idle state selection: :c:member:`flags` Flags representing idle state properties. Currently, governors only use - the ``CPUIDLE_FLAG_POLLING`` flag which is set if the given object + the ``CPUIDLE_FLAG_POLLING_SOFT`` flag which is set if the given object does not represent a real idle state, but an interface to a software "loop" that can be used in order to avoid asking the processor to enter any idle state at all. [There are other flags used by the ``CPUIdle``
drivers/cpuidle/cpuidle-powernv.c +1 -1
@@ -158,7 +158,7 @@ static struct cpuidle_state powernv_states[CPUIDLE_STATE_MAX] = { .exit_latency = 0, .target_residency = 0, .enter = snooze_loop, - .flags = CPUIDLE_FLAG_POLLING }, + .flags = CPUIDLE_FLAG_POLLING_SOFT }, };static int powernv_cpuidle_cpu_online (unsigned int cpu)
drivers/cpuidle/cpuidle-pseries.c +2 -2
@@ -271,7 +271,7 @@ static struct cpuidle_state dedicated_states[NR_DEDICATED_STATES] = { .exit_latency = 0, .target_residency = 0, .enter = &snooze_loop, - .flags = CPUIDLE_FLAG_POLLING }, + .flags = CPUIDLE_FLAG_POLLING_SOFT }, {/* CEDE */ .name = "CEDE", .desc = "CEDE",
@@ -290,7 +290,7 @@ static struct cpuidle_state shared_states[] = { .exit_latency = 0, .target_residency = 0, .enter = &snooze_loop, - .flags = CPUIDLE_FLAG_POLLING }, + .flags = CPUIDLE_FLAG_POLLING_SOFT }, {/* Shared Cede */ .name = "Shared Cede", .desc = "Shared Cede",
drivers/cpuidle/governors/ladder.c +2 -2
@@ -69,7 +69,7 @@ static int ladder_select_state(struct cpuidle_driver *drv,struct ladder_device *ldev =this_cpu_ptr (&ladder_devices);struct ladder_device_state *last_state;int last_idx = dev->last_state_idx; -int first_idx = drv->states[0 ].flags &CPUIDLE_FLAG_POLLING ?1 :0 ; +int first_idx = drv->states[0 ].flags &CPUIDLE_FLAG_POLLING_SOFT ?1 :0 ;s64 latency_req =cpuidle_governor_latency_req (dev->cpu);s64 last_residency;
@@ -133,7 +133,7 @@ static int ladder_enable_device(struct cpuidle_driver *drv, struct cpuidle_device *dev) {int i; -int first_idx = drv->states[0 ].flags &CPUIDLE_FLAG_POLLING ?1 :0 ; +int first_idx = drv->states[0 ].flags &CPUIDLE_FLAG_POLLING_SOFT ?1 :0 ;struct ladder_device *ldev = &per_cpu (ladder_devices, dev->cpu);struct ladder_device_state *lstate;struct cpuidle_state *state;
drivers/cpuidle/governors/menu.c +4 -4
@@ -320,7 +320,7 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,* it right away and keep the tick running if state[0] is a * polling one. */ - *stop_tick = !(drv->states[0 ].flags &CPUIDLE_FLAG_POLLING ); + *stop_tick = !(drv->states[0 ].flags &CPUIDLE_FLAG_POLLING_SOFT );return 0 ; }
@@ -365,7 +365,7 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,* Use a physical idle state, not busy polling, unless * a timer is going to trigger soon enough. */ -if ((drv->states[idx].flags &CPUIDLE_FLAG_POLLING ) && +if ((drv->states[idx].flags &CPUIDLE_FLAG_POLLING_SOFT ) && s->exit_latency_ns <= latency_req && s->target_residency_ns <= data->next_timer_ns) { predicted_ns = s->target_residency_ns;
@@ -411,7 +411,7 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,* Don't stop the tick if the selected state is a polling one or if the * expected idle duration is shorter than the tick period length. */ -if (((drv->states[idx].flags &CPUIDLE_FLAG_POLLING ) || +if (((drv->states[idx].flags &CPUIDLE_FLAG_POLLING_SOFT ) || predicted_ns <TICK_NSEC ) && !tick_nohz_tick_stopped ()) { *stop_tick = false;
@@ -492,7 +492,7 @@ static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev)* duration predictor do a better job next time. */ measured_ns =9 *MAX_INTERESTING /10 ; - }else if ((drv->states[last_idx].flags &CPUIDLE_FLAG_POLLING ) && + }else if ((drv->states[last_idx].flags &CPUIDLE_FLAG_POLLING_SOFT ) && dev->poll_time_limit) {/* * The CPU exited the "polling" state due to a time limit, so
drivers/cpuidle/governors/teo.c +4 -4
@@ -354,7 +354,7 @@ static int teo_find_shallower_state(struct cpuidle_driver *drv,for (i = state_idx -1 ; i >=0 ; i--) {if (dev->states_usage[i].disable || - (no_poll && drv->states[i].flags &CPUIDLE_FLAG_POLLING )) + (no_poll && drv->states[i].flags &CPUIDLE_FLAG_POLLING_SOFT ))continue ; state_idx = i;
@@ -426,7 +426,7 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,* all. If state 1 is disabled, though, state 0 must be used * anyway. */ -if ((!idx && !(drv->states[0 ].flags &CPUIDLE_FLAG_POLLING ) && +if ((!idx && !(drv->states[0 ].flags &CPUIDLE_FLAG_POLLING_SOFT ) &&teo_state_ok (0 , drv)) || dev->states_usage[1 ].disable) { idx =0 ; goto out_tick;
@@ -584,7 +584,7 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,* the current candidate state is low enough and skip the timers * check in that case too. */ -if ((drv->states[0 ].flags &CPUIDLE_FLAG_POLLING ) && +if ((drv->states[0 ].flags &CPUIDLE_FLAG_POLLING_SOFT ) && drv->states[idx].target_residency_ns <RESIDENCY_THRESHOLD_NS ) goto out_tick;
@@ -616,7 +616,7 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,* one or the expected idle duration is shorter than the tick period * length. */ -if ((!(drv->states[idx].flags &CPUIDLE_FLAG_POLLING ) && +if ((!(drv->states[idx].flags &CPUIDLE_FLAG_POLLING_SOFT ) && duration_ns >=TICK_NSEC ) ||tick_nohz_tick_stopped ())return idx;
drivers/cpuidle/poll_state.c +1 -1
@@ -57,6 +57,6 @@ void cpuidle_poll_state_init(struct cpuidle_driver *drv) state->target_residency_ns =0 ; state->power_usage =-1 ; state->enter = poll_idle; - state->flags =CPUIDLE_FLAG_POLLING ; + state->flags =CPUIDLE_FLAG_POLLING_SOFT ; }EXPORT_SYMBOL_GPL (cpuidle_poll_state_init);
include/linux/cpuidle.h +1 -1
@@ -78,7 +78,7 @@ struct cpuidle_state {/* Idle State Flags */ #define CPUIDLE_FLAG_NONE (0x00) -#define CPUIDLE_FLAG_POLLING BIT(0)/* polling state */ +#define CPUIDLE_FLAG_POLLING_SOFT BIT(0)/* polling state */ #define CPUIDLE_FLAG_COUPLED BIT(1)/* state applies to multiple cpus */ #define CPUIDLE_FLAG_TIMER_STOP BIT(2)/* timer is stopped on this state */ #define CPUIDLE_FLAG_UNUSABLE BIT(3)/* avoid using this state */
Signature · 1 line
2.42.1
Rafael J. Wysocki
maintainerRe: [PATCH 4/7] cpuidle: s/CPUIDLE_FLAG_POLLING/CPUIDLE_FLAG_POLLING_SOFT
Quoted 5 lines · Frederic Weisbecker
In order to further distinguish software and hardware
TIF_NEED_RESCHEDpolling cpuidle states, renameCPUIDLE_FLAG_POLLINGtoCPUIDLE_FLAG_POLLING_SOFTbefore introducingCPUIDLE_FLAG_POLLING_HARDand tag mwait users with it.
Well, if MWAIT users are the only category that will be tagged with the new flag, it can be called CPUIDLE_FLAG_POLLING_MWAIT or even CPUIDLE_FLAG_MWAIT for that matter and the $subject patch won't be necessary any more AFAICS.
Quoted 4 lines
This will allow cpuidle core to manage
TIF_NR_POLLINGon behalf of all kinds ofTIF_NEED_RESCHEDpolling states while keeping a necessary distinction for the governors between software loops polling onTIF_NEED_RESCHEDand hardware monitored writes to thread flags.
Fair enough, but what about using a different name for the new flag and leaving the old one as is?
Re: [PATCH 4/7] cpuidle: s/CPUIDLE_FLAG_POLLING/CPUIDLE_FLAG_POLLING_SOFT
Quoted 8 lines · Rafael J. Wysocki
Quoted 5 lines · Frederic Weisbecker
In order to further distinguish software and hardware
TIF_NEED_RESCHEDpolling cpuidle states, renameCPUIDLE_FLAG_POLLINGtoCPUIDLE_FLAG_POLLING_SOFTbefore introducingCPUIDLE_FLAG_POLLING_HARDand tag mwait users with it.
Quoted 4 lines
Well, if MWAIT users are the only category that will be tagged with the new flag, it can be called
CPUIDLE_FLAG_POLLING_MWAITor evenCPUIDLE_FLAG_MWAITfor that matter and the $subject patch won't be necessary any more AFAICS.
Yep.
Quoted 8 lines
Quoted 5 lines
This will allow cpuidle core to manage
TIF_NR_POLLINGon behalf of all kinds ofTIF_NEED_RESCHEDpolling states while keeping a necessary distinction for the governors between software loops polling onTIF_NEED_RESCHEDand hardware monitored writes to thread flags.Fair enough, but what about using a different name for the new flag and leaving the old one as is?
Sounds good. Will do.
Thanks!
PATCH 5/7 cpuidle: Introduce CPUIDLE_FLAG_POLLING_HARD
In reply to Frederic WeisbeckerFrom: Peter Zijlstra <[email protected]>
Provide a way to tell the cpuidle core about states polling/monitoring TIF_NEED_RESCHED on the hardware level, monitor/mwait users being the only examples in use.
This will allow cpuidle core to manage TIF_NR_POLLING on behalf of all kinds of TIF_NEED_RESCHED polling states while keeping a necessary distinction for the governors between software loops polling on TIF_NEED_RESCHED and hardware monitored writes to thread flags.
[fweisbec: _ Initialize flag from acpi_processor_setup_cstates() instead
of acpi_processor_setup_lpi_states(), as the latter seem to be about arm64...
_ Rename CPUIDLE_FLAG_NO_IPI to CPUIDLE_FLAG_POLLING_HARD]
--- drivers/acpi/processor_idle.c | 3 +++ drivers/idle/intel_idle.c | 5 ++++- include/linux/cpuidle.h | 3 ++- 3 files changed, 9 insertions(+), 2 deletions(-)
drivers/acpi/processor_idle.c +3 -0
@@ -814,6 +814,9 @@ static int acpi_processor_setup_cstates(struct acpi_processor *pr)if (cx->type !=ACPI_STATE_C3 ) drv->safe_state_index = count; } + +if (cx->entry_method ==ACPI_CSTATE_FFH ) + state->flags |=CPUIDLE_FLAG_POLLING_HARD ;/* * Halt-induced C1 is not good for ->enter_s2idle, because it * re-enables interrupts on exit. Moreover, C1 is generally not
drivers/idle/intel_idle.c +4 -1
@@ -1563,7 +1563,8 @@ static void __init intel_idle_init_cstates_acpi(struct cpuidle_driver *drv)if (cx->type >ACPI_STATE_C1 ) state->target_residency *=3 ; - state->flags =MWAIT2flg (cx->address); + state->flags =MWAIT2flg (cx->address) |CPUIDLE_FLAG_POLLING_HARD ; +if (cx->type >ACPI_STATE_C2 ) state->flags |=CPUIDLE_FLAG_TLB_FLUSHED ;
@@ -1836,6 +1837,8 @@ static bool __init intel_idle_verify_cstate(unsigned int mwait_hint)static void state_update_enter_method (struct cpuidle_state *state,int cstate) { + state->flags |=CPUIDLE_FLAG_POLLING_HARD ; +if (state->flags &CPUIDLE_FLAG_INIT_XSTATE ) {/* * Combining with XSTATE with IBRS or IRQ_ENABLE flags
include/linux/cpuidle.h +2 -1
@@ -78,13 +78,14 @@ struct cpuidle_state {/* Idle State Flags */ #define CPUIDLE_FLAG_NONE (0x00) -#define CPUIDLE_FLAG_POLLING_SOFT BIT(0)/* polling state */ +#define CPUIDLE_FLAG_POLLING_SOFT BIT(0)/* software need_resched() polling state */ #define CPUIDLE_FLAG_COUPLED BIT(1)/* state applies to multiple cpus */ #define CPUIDLE_FLAG_TIMER_STOP BIT(2)/* timer is stopped on this state */ #define CPUIDLE_FLAG_UNUSABLE BIT(3)/* avoid using this state */ #define CPUIDLE_FLAG_OFF BIT(4)/* disable this state by default */ #define CPUIDLE_FLAG_TLB_FLUSHED BIT(5)/* idle-state flushes TLBs */ #define CPUIDLE_FLAG_RCU_IDLE BIT(6)/* idle-state takes care of RCU */ +#define CPUIDLE_FLAG_POLLING_HARD BIT(7)/* hardware need_resched() polling state */ struct cpuidle_device_kobj ;struct cpuidle_state_kobj ;
Signature · 1 line
2.42.1
Rafael J. Wysocki
maintainerRe: [PATCH 5/7] cpuidle: Introduce CPUIDLE_FLAG_POLLING_HARD
Quoted 69 lines · Frederic Weisbecker
From: Peter Zijlstra <[email protected]>
Provide a way to tell the cpuidle core about states polling/monitoring
TIF_NEED_RESCHEDon the hardware level, monitor/mwait users being the only examples in use.This will allow cpuidle core to manage
TIF_NR_POLLINGon behalf of all kinds ofTIF_NEED_RESCHEDpolling states while keeping a necessary distinction for the governors between software loops polling onTIF_NEED_RESCHEDand hardware monitored writes to thread flags.[fweisbec: _ Initialize flag from
acpi_processor_setup_cstates()instead
ofacpi_processor_setup_lpi_states(), as the latter seem to be about arm64...
_ RenameCPUIDLE_FLAG_NO_IPItoCPUIDLE_FLAG_POLLING_HARD]Not-yet-signed-off-by Peter Zijlstra <[email protected]>Signed-off-by Frederic Weisbecker <[email protected]>--- drivers/acpi/processor_idle.c | 3 +++ drivers/idle/intel_idle.c | 5 ++++- include/linux/cpuidle.h | 3 ++- 3 files changed, 9 insertions(+), 2 deletions(-)drivers/acpi/processor_idle.c +3
-0@@ -814,6 +814,9 @@ static int acpi_processor_setup_cstates(struct acpi_processor *pr)if (cx->type !=ACPI_STATE_C3 ) drv->safe_state_index = count; } + +if (cx->entry_method ==ACPI_CSTATE_FFH ) + state->flags |=CPUIDLE_FLAG_POLLING_HARD ;/* * Halt-induced C1 is not good for ->enter_s2idle, because it * re-enables interrupts on exit. Moreover, C1 is generally not drivers/idle/intel_idle.c +4
-1@@ -1563,7 +1563,8 @@ static void __init intel_idle_init_cstates_acpi(struct cpuidle_driver *drv)if (cx->type >ACPI_STATE_C1 ) state->target_residency *=3 ; - state->flags =MWAIT2flg (cx->address); + state->flags =MWAIT2flg (cx->address) |CPUIDLE_FLAG_POLLING_HARD ; +if (cx->type >ACPI_STATE_C2 ) state->flags |=CPUIDLE_FLAG_TLB_FLUSHED ;@@ -1836,6 +1837,8 @@ static bool __init intel_idle_verify_cstate(unsigned int mwait_hint)static void state_update_enter_method (struct cpuidle_state *state,int cstate) { + state->flags |=CPUIDLE_FLAG_POLLING_HARD ; +if (state->flags &CPUIDLE_FLAG_INIT_XSTATE ) {/* * Combining with XSTATE with IBRS or IRQ_ENABLE flags include/linux/cpuidle.h +0
-0@@ -78,13 +78,14 @@ struct cpuidle_state {/* Idle State Flags */
include/linux/cpuidle.h struct cpuidle_state { · line 88
Quoted 10 lines
include/linux/cpuidle.h +2
-1#define CPUIDLE_FLAG_NONE (0x00) -#define CPUIDLE_FLAG_POLLING_SOFT BIT(0)/* polling state */ +#define CPUIDLE_FLAG_POLLING_SOFT BIT(0)/* software need_resched() polling state */ #define CPUIDLE_FLAG_COUPLED BIT(1)/* state applies to multiple cpus */ #define CPUIDLE_FLAG_TIMER_STOP BIT(2)/* timer is stopped on this state */ #define CPUIDLE_FLAG_UNUSABLE BIT(3)/* avoid using this state */ #define CPUIDLE_FLAG_OFF BIT(4)/* disable this state by default */ #define CPUIDLE_FLAG_TLB_FLUSHED BIT(5)/* idle-state flushes TLBs */ #define CPUIDLE_FLAG_RCU_IDLE BIT(6)/* idle-state takes care of RCU */ +#define CPUIDLE_FLAG_POLLING_HARD BIT(7)/* hardware need_resched() polling state */
Hardware need_resched() monitoring rather? This doesn't do what "polling" usually means AFAICS.
Quoted 4 lines
include/linux/cpuidle.h +0
-1struct cpuidle_device_kobj ;struct cpuidle_state_kobj ; --
Re: [PATCH 5/7] cpuidle: Introduce CPUIDLE_FLAG_POLLING_HARD
Quoted 6 lines · Rafael J. Wysocki
Quoted 6 lines
include/linux/cpuidle.h +0
-0@@ -78,13 +78,14 @@ struct cpuidle_state {
Quoted 14 lines
include/linux/cpuidle.h struct cpuidle_state { · line 88
Quoted 11 lines
include/linux/cpuidle.h +2
-1/* Idle State Flags */ #define CPUIDLE_FLAG_NONE (0x00) -#define CPUIDLE_FLAG_POLLING_SOFT BIT(0)/* polling state */ +#define CPUIDLE_FLAG_POLLING_SOFT BIT(0)/* software need_resched() polling state */ #define CPUIDLE_FLAG_COUPLED BIT(1)/* state applies to multiple cpus */ #define CPUIDLE_FLAG_TIMER_STOP BIT(2)/* timer is stopped on this state */ #define CPUIDLE_FLAG_UNUSABLE BIT(3)/* avoid using this state */ #define CPUIDLE_FLAG_OFF BIT(4)/* disable this state by default */ #define CPUIDLE_FLAG_TLB_FLUSHED BIT(5)/* idle-state flushes TLBs */ #define CPUIDLE_FLAG_RCU_IDLE BIT(6)/* idle-state takes care of RCU */ +#define CPUIDLE_FLAG_POLLING_HARD BIT(7)/* hardware need_resched() polling state */ Hardware
need_resched()monitoring rather? This doesn't do what "polling" usually means AFAICS.
Fair enough!
Quoted 4 lines
Quoted 4 lines
include/linux/cpuidle.h +0
-1struct cpuidle_device_kobj ;struct cpuidle_state_kobj ; --
PATCH 6/7 cpuidle: Handle TIF_NR_POLLING on behalf of CPUIDLE_FLAG_POLLING_HARD states
In reply to Frederic WeisbeckerFrom: Peter Zijlstra <[email protected]>
The current handling of TIF_NR_POLLING is a bit of a maze:
1) A common brief part in the generic idle loop sets TIF_NR_POLLING while cpuidle selects an appropriate state and the tick is evaluated and then stopped. Summary: One pair of set/clear
2) The state cpuidle is then called with TIF_NR_POLLING cleared but if the state polls on need_resched() (software or hardware), it sets again TIF_NR_POLLING and clears it when it completes. Summary: another pair of set/clear
3) goto 1)
However those costly atomic operations, fully ordered RmW for some of them, could be avoided if the cpuidle core knew in advance if the target state polls on need_resched(). If so, TIF_NR_POLLING could simply be set once before entering the idle loop and cleared once after idle loop exit.
Start dealing with that with handling TIF_NR_POLLING on behalf of CPUIDLE_FLAG_POLLING_HARD states.
[fweisbec: _ Handle broadcast properly
_ Ignore mwait_idle() as it can be used by default_idle_call()]
--- arch/x86/include/asm/mwait.h | 3 +-- drivers/cpuidle/cpuidle.c | 22 +++++++++++++++++++- include/linux/sched/idle.h | 7 ++++++- kernel/sched/idle.c | 40 +++++++++++++----------------------- 4 files changed, 42 insertions(+), 30 deletions(-)
arch/x86/include/asm/mwait.h +1 -2
@@ -116,7 +116,7 @@ static __always_inline void __sti_mwait(unsigned long eax, unsigned long ecx)*/ static __always_inline void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) { -if (static_cpu_has_bug (X86_BUG_MONITOR ) || !current_set_polling_and_test ()) { +if (static_cpu_has_bug (X86_BUG_MONITOR ) || !need_resched ()) {if (static_cpu_has_bug (X86_BUG_CLFLUSH_MONITOR )) {mb ();clflush ((void *)¤t_thread_info ()->flags);
@@ -134,7 +134,6 @@ static __always_inline void mwait_idle_with_hints(unsigned long eax, unsigned lo } } } -current_clr_polling (); }/*
drivers/cpuidle/cpuidle.c +21 -1
@@ -213,10 +213,10 @@ noinstr int cpuidle_enter_state(struct cpuidle_device *dev, int index) {int entered_state; -struct cpuidle_state *target_state = &drv->states[index];bool broadcast = !!(target_state->flags &CPUIDLE_FLAG_TIMER_STOP );ktime_t time_start, time_end; +bool polling;instrumentation_begin ();
@@ -236,6 +236,23 @@ noinstr int cpuidle_enter_state(struct cpuidle_device *dev, broadcast = false; } + polling = target_state->flags &CPUIDLE_FLAG_POLLING_HARD ; + +/* +* If the target state doesn't poll on need_resched(), this is +* the last check after which further TIF_NEED_RESCHED remote setting +* will involve an IPI. +*/ +if (!polling &¤t_clr_polling_and_test ()) { +if (broadcast) +tick_broadcast_exit (); + dev->last_residency_ns =0 ; +local_irq_enable (); +instrumentation_end (); +return -EBUSY ; + } + +if (target_state->flags &CPUIDLE_FLAG_TLB_FLUSHED )leave_mm (dev->cpu);
@@ -335,6 +352,9 @@ noinstr int cpuidle_enter_state(struct cpuidle_device *dev, dev->states_usage[index].rejected++; } +if (!polling) +__current_set_polling (); +instrumentation_end ();return entered_state;
include/linux/sched/idle.h +6 -1
@@ -68,6 +68,8 @@ static __always_inline bool __must_check current_set_polling_and_test(void) static __always_inline bool __must_check current_clr_polling_and_test(void) { +bool ret; +__current_clr_polling ();/*
@@ -76,7 +78,10 @@ static __always_inline bool __must_check current_clr_polling_and_test(void)*/ smp_mb__after_atomic (); - return unlikely(tif_need_resched()); + ret =unlikely (tif_need_resched ()); +if (ret) +__current_set_polling (); + return ret; }#else
kernel/sched/idle.c +14 -26
@@ -94,11 +94,12 @@ void __cpuidle default_idle_call(void)stop_critical_timings ();ct_cpuidle_enter (); -arch_cpu_idle (); +arch_cpu_idle ();// XXX assumes !polling ct_cpuidle_exit ();start_critical_timings ();trace_cpu_idle (PWR_EVENT_EXIT ,smp_processor_id ()); +__current_set_polling (); }local_irq_enable ();instrumentation_end ();
@@ -107,31 +108,14 @@ void __cpuidle default_idle_call(void)static int call_cpuidle_s2idle (struct cpuidle_driver *drv,struct cpuidle_device *dev) { +int ret; +if (current_clr_polling_and_test ())return -EBUSY ; -return cpuidle_enter_s2idle (drv, dev); -} - -static int call_cpuidle (struct cpuidle_driver *drv,struct cpuidle_device *dev, -int next_state) -{ -/* -* The idle task must be scheduled, it is pointless to go to idle, just -* update no idle residency and return. -*/ -if (current_clr_polling_and_test ()) { - dev->last_residency_ns =0 ; -local_irq_enable (); -return -EBUSY ; - } - -/* -* Enter the idle state previously returned by the governor decision. -* This function will block until an interrupt occurs and will take -* care of re-enabling the local interrupts -*/ -return cpuidle_enter (drv, dev, next_state); + ret =cpuidle_enter_s2idle (drv, dev); +__current_set_polling (); +return ret; }/**
@@ -198,7 +182,7 @@ static void cpuidle_idle_call(void)tick_nohz_idle_stop_tick (); next_state =cpuidle_find_deepest_state (drv, dev, max_latency_ns); -call_cpuidle (drv, dev, next_state); +cpuidle_enter (drv, dev, next_state); }else {bool stop_tick = true;
@@ -212,7 +196,12 @@ static void cpuidle_idle_call(void)else tick_nohz_idle_retain_tick (); - entered_state =call_cpuidle (drv, dev, next_state); +/* +* Enter the idle state previously returned by the governor decision. +* This function will block until an interrupt occurs and will take +* care of re-enabling the local interrupts. +*/ + entered_state =cpuidle_enter (drv, dev, next_state);/* * Give the governor an opportunity to reflect on the outcome */
@@ -220,7 +209,6 @@ static void cpuidle_idle_call(void) } exit_idle: -__current_set_polling ();/* * It is up to the idle functions to reenable local interrupts
Signature · 1 line
2.42.1
Rafael J. Wysocki
maintainerRe: [PATCH 6/7] cpuidle: Handle TIF_NR_POLLING on behalf of CPUIDLE_FLAG_POLLING_HARD states
Quoted 155 lines · Frederic Weisbecker
From: Peter Zijlstra <[email protected]>
The current handling of
TIF_NR_POLLINGis a bit of a maze:1) A common brief part in the generic idle loop sets
TIF_NR_POLLINGwhile cpuidle selects an appropriate state and the tick is evaluated and then stopped. Summary: One pair of set/clear2) The state cpuidle is then called with
TIF_NR_POLLINGcleared but if the state polls onneed_resched()(software or hardware), it sets againTIF_NR_POLLINGand clears it when it completes. Summary: another pair of set/clear3) goto 1)
However those costly atomic operations, fully ordered RmW for some of them, could be avoided if the cpuidle core knew in advance if the target state polls on
need_resched(). If so,TIF_NR_POLLINGcould simply be set once before entering the idle loop and cleared once after idle loop exit.Start dealing with that with handling
TIF_NR_POLLINGon behalf ofCPUIDLE_FLAG_POLLING_HARDstates.[fweisbec: _ Handle broadcast properly
_ Ignoremwait_idle()as it can be used bydefault_idle_call()]Not-yet-signed-off-by Peter Zijlstra <[email protected]>Signed-off-by Frederic Weisbecker <[email protected]>--- arch/x86/include/asm/mwait.h | 3 +-- drivers/cpuidle/cpuidle.c | 22 +++++++++++++++++++- include/linux/sched/idle.h | 7 ++++++- kernel/sched/idle.c | 40 +++++++++++++----------------------- 4 files changed, 42 insertions(+), 30 deletions(-)arch/x86/include/asm/mwait.h +1
-2@@ -116,7 +116,7 @@ static __always_inline void __sti_mwait(unsigned long eax, unsigned long ecx)*/ static __always_inline void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) { -if (static_cpu_has_bug (X86_BUG_MONITOR ) || !current_set_polling_and_test ()) { +if (static_cpu_has_bug (X86_BUG_MONITOR ) || !need_resched ()) {if (static_cpu_has_bug (X86_BUG_CLFLUSH_MONITOR )) {mb ();clflush ((void *)¤t_thread_info ()->flags);@@ -134,7 +134,6 @@ static __always_inline void mwait_idle_with_hints(unsigned long eax, unsigned lo } } } -current_clr_polling (); }/* drivers/cpuidle/cpuidle.c +21
-1@@ -213,10 +213,10 @@ noinstr int cpuidle_enter_state(struct cpuidle_device *dev, int index) {int entered_state; -struct cpuidle_state *target_state = &drv->states[index];bool broadcast = !!(target_state->flags &CPUIDLE_FLAG_TIMER_STOP );ktime_t time_start, time_end; +bool polling;instrumentation_begin ();@@ -236,6 +236,23 @@ noinstr int cpuidle_enter_state(struct cpuidle_device *dev, broadcast = false; } + polling = target_state->flags &CPUIDLE_FLAG_POLLING_HARD ; + +/* +* If the target state doesn't poll on need_resched(), this is +* the last check after which further TIF_NEED_RESCHED remote setting +* will involve an IPI. +*/ +if (!polling &¤t_clr_polling_and_test ()) { +if (broadcast) +tick_broadcast_exit (); + dev->last_residency_ns =0 ; +local_irq_enable (); +instrumentation_end (); +return -EBUSY ; + } + +if (target_state->flags &CPUIDLE_FLAG_TLB_FLUSHED )leave_mm (dev->cpu);@@ -335,6 +352,9 @@ noinstr int cpuidle_enter_state(struct cpuidle_device *dev, dev->states_usage[index].rejected++; } +if (!polling) +__current_set_polling (); +instrumentation_end ();return entered_state;include/linux/sched/idle.h +6
-1@@ -68,6 +68,8 @@ static __always_inline bool __must_check current_set_polling_and_test(void) static __always_inline bool __must_check current_clr_polling_and_test(void) { +bool ret; +__current_clr_polling ();/* @@ -76,7 +78,10 @@ static __always_inline bool __must_check current_clr_polling_and_test(void)*/ smp_mb__after_atomic (); - return unlikely(tif_need_resched()); + ret =unlikely (tif_need_resched ()); +if (ret) +__current_set_polling (); + return ret; }#else kernel/sched/idle.c +2
-1@@ -94,11 +94,12 @@ void __cpuidle default_idle_call(void)stop_critical_timings ();ct_cpuidle_enter (); -arch_cpu_idle (); +arch_cpu_idle ();// XXX assumes !polling ct_cpuidle_exit ();start_critical_timings ();trace_cpu_idle (PWR_EVENT_EXIT ,smp_processor_id ()); +__current_set_polling (); }local_irq_enable ();instrumentation_end ();@@ -107,31 +108,14 @@ void __cpuidle default_idle_call(void)static int call_cpuidle_s2idle (struct cpuidle_driver *drv,struct cpuidle_device *dev) {
kernel/sched/idle.c void __cpuidle default_idle_call(void) · line 117
Quoted 10 lines
kernel/sched/idle.c +2
-5+int ret; +if (current_clr_polling_and_test ())return -EBUSY ; -return cpuidle_enter_s2idle (drv, dev); -} - -static int call_cpuidle (struct cpuidle_driver *drv,struct cpuidle_device *dev, -int next_state)
Since you are removing call_cpuidle(), you may as well remove call_cpuidle_s2idle() which only has one caller anyway.
Quoted 57 lines
kernel/sched/idle.c +10
-21-{ -/* -* The idle task must be scheduled, it is pointless to go to idle, just -* update no idle residency and return. -*/ -if (current_clr_polling_and_test ()) { - dev->last_residency_ns =0 ; -local_irq_enable (); -return -EBUSY ; - } - -/* -* Enter the idle state previously returned by the governor decision. -* This function will block until an interrupt occurs and will take -* care of re-enabling the local interrupts -*/ -return cpuidle_enter (drv, dev, next_state); + ret =cpuidle_enter_s2idle (drv, dev); +__current_set_polling (); +return ret; }/** @@ -198,7 +182,7 @@ static void cpuidle_idle_call(void)tick_nohz_idle_stop_tick (); next_state =cpuidle_find_deepest_state (drv, dev, max_latency_ns); -call_cpuidle (drv, dev, next_state); +cpuidle_enter (drv, dev, next_state); }else {bool stop_tick = true;@@ -212,7 +196,12 @@ static void cpuidle_idle_call(void)else tick_nohz_idle_retain_tick (); - entered_state =call_cpuidle (drv, dev, next_state); +/* +* Enter the idle state previously returned by the governor decision. +* This function will block until an interrupt occurs and will take +* care of re-enabling the local interrupts. +*/ + entered_state =cpuidle_enter (drv, dev, next_state);/* * Give the governor an opportunity to reflect on the outcome */ @@ -220,7 +209,6 @@ static void cpuidle_idle_call(void) } exit_idle: -__current_set_polling ();/* * It is up to the idle functions to reenable local interrupts -- 2.42.1
Re: [PATCH 6/7] cpuidle: Handle TIF_NR_POLLING on behalf of CPUIDLE_FLAG_POLLING_HARD states
Quoted 8 lines · Rafael J. Wysocki
On Fri, Nov 24, 2023 at 11:32 PM Frederic Weisbecker
kernel/sched/idle.c void __cpuidle default_idle_call(void) · line 117
Quoted 4 lines
kernel/sched/idle.c +0
-4-} - -static int call_cpuidle (struct cpuidle_driver *drv,struct cpuidle_device *dev, -int next_state)Since you are removing
call_cpuidle(), you may as well removecall_cpuidle_s2idle()which only has one caller anyway.
Doing so in a seperate patch. Thanks!
PATCH 7/7 cpuidle: Handle TIF_NR_POLLING on behalf of software polling idle states
In reply to Frederic WeisbeckerSoftware polling idle states set again TIF_NR_POLLING and clear it upon exit. This involves error prone duplicated code and wasted cycles performing atomic operations, sometimes RmW fully ordered.
To avoid this, benefit instead from the same generic TIF_NR_POLLING handling that is currently in use for hardware polling states.
--- drivers/cpuidle/cpuidle-powernv.c | 10 ---------- drivers/cpuidle/cpuidle-pseries.c | 11 ----------- drivers/cpuidle/cpuidle.c | 4 ++-- drivers/cpuidle/poll_state.c | 30 ++++++++++++------------------ 4 files changed, 14 insertions(+), 41 deletions(-)
drivers/cpuidle/cpuidle-powernv.c +0 -10
@@ -71,8 +71,6 @@ static int snooze_loop(struct cpuidle_device *dev, {u64 snooze_exit_time; -set_thread_flag (TIF_POLLING_NRFLAG ); -local_irq_enable (); snooze_exit_time =get_tb () +get_snooze_timeout (dev, drv, index);
@@ -81,21 +79,13 @@ static int snooze_loop(struct cpuidle_device *dev,HMT_very_low ();while (!need_resched ()) {if (likely (snooze_timeout_en) &&get_tb () > snooze_exit_time) { -/* -* Task has not woken up but we are exiting the polling -* loop anyway. Require a barrier after polling is -* cleared to order subsequent test of need_resched(). -*/ -clear_thread_flag (TIF_POLLING_NRFLAG ); dev->poll_time_limit = true; -smp_mb ();break ; } }HMT_medium ();ppc64_runlatch_on (); -clear_thread_flag (TIF_POLLING_NRFLAG );local_irq_disable ();
drivers/cpuidle/cpuidle-pseries.c +0 -11
@@ -39,8 +39,6 @@ int snooze_loop(struct cpuidle_device *dev, struct cpuidle_driver *drv, {u64 snooze_exit_time; -set_thread_flag (TIF_POLLING_NRFLAG ); -pseries_idle_prolog ();raw_local_irq_enable (); snooze_exit_time =get_tb () + snooze_timeout;
@@ -50,21 +48,12 @@ int snooze_loop(struct cpuidle_device *dev, struct cpuidle_driver *drv,HMT_low ();HMT_very_low ();if (likely (snooze_timeout_en) &&get_tb () > snooze_exit_time) { -/* -* Task has not woken up but we are exiting the polling -* loop anyway. Require a barrier after polling is -* cleared to order subsequent test of need_resched(). -*/ dev->poll_time_limit = true; -clear_thread_flag (TIF_POLLING_NRFLAG ); -smp_mb ();break ; } }HMT_medium (); -clear_thread_flag (TIF_POLLING_NRFLAG ); -raw_local_irq_disable ();pseries_idle_epilog ();
drivers/cpuidle/cpuidle.c +2 -2
@@ -236,8 +236,8 @@ noinstr int cpuidle_enter_state(struct cpuidle_device *dev, broadcast = false; } - polling = target_state->flags &CPUIDLE_FLAG_POLLING_HARD ; - + polling = (target_state->flags & (CPUIDLE_FLAG_POLLING_SOFT | +CPUIDLE_FLAG_POLLING_HARD ));/* * If the target state doesn't poll on need_resched(), this is * the last check after which further TIF_NEED_RESCHED remote setting
drivers/cpuidle/poll_state.c +12 -18
@@ -13,35 +13,29 @@ static int __cpuidle poll_idle(struct cpuidle_device *dev,struct cpuidle_driver *drv,int index) { -u64 time_start; - - time_start =local_clock_noinstr (); +u64 time_start =local_clock_noinstr (); +unsigned int loop_count =0 ; +u64 limit; dev->poll_time_limit = false;raw_local_irq_enable (); -if (!current_set_polling_and_test ()) { -unsigned int loop_count =0 ; -u64 limit; - limit =cpuidle_poll_time (drv, dev); + limit =cpuidle_poll_time (drv, dev); -while (!need_resched ()) { -cpu_relax (); -if (loop_count++ <POLL_IDLE_RELAX_COUNT ) -continue ; +while (!need_resched ()) { +cpu_relax (); +if (loop_count++ <POLL_IDLE_RELAX_COUNT ) +continue ; - loop_count =0 ; -if (local_clock_noinstr () - time_start > limit) { - dev->poll_time_limit = true; -break ; - } + loop_count =0 ; +if (local_clock_noinstr () - time_start > limit) { + dev->poll_time_limit = true; +break ; } }raw_local_irq_disable (); -current_clr_polling (); -return index; }
Signature · 1 line
2.42.1
Rafael J. Wysocki
maintainerRe: [PATCH 7/7] cpuidle: Handle TIF_NR_POLLING on behalf of software polling idle states
Quoted 91 lines · Frederic Weisbecker
Software polling idle states set again
TIF_NR_POLLINGand clear it upon exit. This involves error prone duplicated code and wasted cycles performing atomic operations, sometimes RmW fully ordered.To avoid this, benefit instead from the same generic
TIF_NR_POLLINGhandling that is currently in use for hardware polling states.Signed-off-by Frederic Weisbecker <[email protected]>--- drivers/cpuidle/cpuidle-powernv.c | 10 ---------- drivers/cpuidle/cpuidle-pseries.c | 11 ----------- drivers/cpuidle/cpuidle.c | 4 ++-- drivers/cpuidle/poll_state.c | 30 ++++++++++++------------------ 4 files changed, 14 insertions(+), 41 deletions(-)drivers/cpuidle/cpuidle-powernv.c +0
-10@@ -71,8 +71,6 @@ static int snooze_loop(struct cpuidle_device *dev, {u64 snooze_exit_time; -set_thread_flag (TIF_POLLING_NRFLAG ); -local_irq_enable (); snooze_exit_time =get_tb () +get_snooze_timeout (dev, drv, index);@@ -81,21 +79,13 @@ static int snooze_loop(struct cpuidle_device *dev,HMT_very_low ();while (!need_resched ()) {if (likely (snooze_timeout_en) &&get_tb () > snooze_exit_time) { -/* -* Task has not woken up but we are exiting the polling -* loop anyway. Require a barrier after polling is -* cleared to order subsequent test of need_resched(). -*/ -clear_thread_flag (TIF_POLLING_NRFLAG ); dev->poll_time_limit = true; -smp_mb ();break ; } }HMT_medium ();ppc64_runlatch_on (); -clear_thread_flag (TIF_POLLING_NRFLAG );local_irq_disable ();drivers/cpuidle/cpuidle-pseries.c +0
-11@@ -39,8 +39,6 @@ int snooze_loop(struct cpuidle_device *dev, struct cpuidle_driver *drv, {u64 snooze_exit_time; -set_thread_flag (TIF_POLLING_NRFLAG ); -pseries_idle_prolog ();raw_local_irq_enable (); snooze_exit_time =get_tb () + snooze_timeout;@@ -50,21 +48,12 @@ int snooze_loop(struct cpuidle_device *dev, struct cpuidle_driver *drv,HMT_low ();HMT_very_low ();if (likely (snooze_timeout_en) &&get_tb () > snooze_exit_time) { -/* -* Task has not woken up but we are exiting the polling -* loop anyway. Require a barrier after polling is -* cleared to order subsequent test of need_resched(). -*/ dev->poll_time_limit = true; -clear_thread_flag (TIF_POLLING_NRFLAG ); -smp_mb ();break ; } }HMT_medium (); -clear_thread_flag (TIF_POLLING_NRFLAG ); -raw_local_irq_disable ();pseries_idle_epilog ();drivers/cpuidle/cpuidle.c +0
-0
drivers/cpuidle/cpuidle.c noinstr int cpuidle_enter_state(struct cpuidle_device *dev, · line 240
Quoted 7 lines
drivers/cpuidle/cpuidle.c +2
-2@@ -236,8 +236,8 @@ noinstr int cpuidle_enter_state(struct cpuidle_device *dev, broadcast = false; } - polling = target_state->flags &CPUIDLE_FLAG_POLLING_HARD ; - + polling = (target_state->flags & (CPUIDLE_FLAG_POLLING_SOFT | +CPUIDLE_FLAG_POLLING_HARD ));
The outer parens are not needed on the right-hand side, or apply !! to it.
Quoted 56 lines
drivers/cpuidle/cpuidle.c +0
-0/* * If the target state doesn't poll on need_resched(), this is * the last check after which further TIF_NEED_RESCHED remote setting drivers/cpuidle/poll_state.c +12
-19@@ -13,35 +13,29 @@ static int __cpuidle poll_idle(struct cpuidle_device *dev,struct cpuidle_driver *drv,int index) { -u64 time_start; - - time_start =local_clock_noinstr (); +u64 time_start =local_clock_noinstr (); +unsigned int loop_count =0 ; +u64 limit; dev->poll_time_limit = false;raw_local_irq_enable (); -if (!current_set_polling_and_test ()) { -unsigned int loop_count =0 ; -u64 limit; - limit =cpuidle_poll_time (drv, dev); + limit =cpuidle_poll_time (drv, dev); -while (!need_resched ()) { -cpu_relax (); -if (loop_count++ <POLL_IDLE_RELAX_COUNT ) -continue ; +while (!need_resched ()) { +cpu_relax (); +if (loop_count++ <POLL_IDLE_RELAX_COUNT ) +continue ; - loop_count =0 ; -if (local_clock_noinstr () - time_start > limit) { - dev->poll_time_limit = true; -break ; - } + loop_count =0 ; +if (local_clock_noinstr () - time_start > limit) { + dev->poll_time_limit = true; +break ; } }raw_local_irq_disable (); -current_clr_polling (); -return index; } --