Skip to contentSkip to conversation

usb: typec: ucsi: Expand SOP/SOP' Discovery

PATCH In review Jameson Thies 6 participants 13 messages Mar 5, 2024 – Mar 27, 2024

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v4 cover usb: typec: ucsi: Expand SOP/SOP' Discovery

Hi Heikki,

This patch series expands support for partner and cable discover in the UCSI driver. There are a few pieces here.

1. Some cleanup of the GET_CABLE_PROP definitions in ucsi.h.
2. Cable discovery and registration with the USB Type-C connector class.
3. Partner/Cable identity registration with the USB Type-C connector class.
4. SOP' alternate mode registration with the USB-C connector class using a cable plug.

These have been tested on a the usb-testing branch merged with a chromeOS 6.8-rc2 kernel. Let me know if you have any questions.

Thanks,
Jameson

Changes in v4:
- Cleaned up redundent ucsi_send_command calls for discovering identity.

Changes in v3:
- Fixed CC stable and email threading issue.

Changes in v2:
- Re-ordered memset call and null assignment when unregistering partners and cables.
- Supports registering partner and cable identity with UCSI versions before v2.0.
- Shortened lines to within 80 characters with the exception of two error log lines with three indentations.
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

Jameson Thies (4):
usb: typec: ucsi: Clean up UCSI_CABLE_PROP macros
usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY
usb: typec: ucsi: Register SOP/SOP' Discover Identity Responses
usb: typec: ucsi: Register SOP' alternate modes with cable plug

 drivers/usb/typec/ucsi/ucsi.c | 245 ++++++++++++++++++++++++++++++++++
 drivers/usb/typec/ucsi/ucsi.h |  40 +++++-
 2 files changed, 283 insertions(+), 2 deletions(-)

base-commit: a14e6fd1b67799da7da9cc344023bd16aaf0d17d

Signature · 1 line
2.44.0.rc1.240.g4c46232300-goog
#1 lore raw

PATCH v4 1/4 usb: typec: ucsi: Clean up UCSI_CABLE_PROP macros

Clean up UCSI_CABLE_PROP macros by fixing a bitmask shifting error for plug type and updating the modal support macro for consistent naming.

Fixes 3cf657f07918 ("usb: typec: ucsi: Remove all bit-fields")

---
Changes in v4:
- None.

Changes in v3:
- Fixed CC stable.

Changes in v2:
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

 drivers/usb/typec/ucsi/ucsi.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/typec/ucsi/ucsi.h +2 -2
index 7e35ffbe0a6f2..469a2baf472e4 100644
@@ -259,12 +259,12 @@ struct ucsi_cable_property {
 #define UCSI_CABLE_PROP_FLAG_VBUS_IN_CABLE	BIT(0)
 #define UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE	BIT(1)
 #define UCSI_CABLE_PROP_FLAG_DIRECTIONALITY	BIT(2)
-#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_)	((_f_) & GENMASK(3, 0))
+#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_)	(((_f_) & GENMASK(4, 3)) >> 3)
 #define   UCSI_CABLE_PROPERTY_PLUG_TYPE_A	0
 #define   UCSI_CABLE_PROPERTY_PLUG_TYPE_B	1
 #define   UCSI_CABLE_PROPERTY_PLUG_TYPE_C	2
 #define   UCSI_CABLE_PROPERTY_PLUG_OTHER	3
-#define UCSI_CABLE_PROP_MODE_SUPPORT		BIT(5)
+#define UCSI_CABLE_PROP_FLAG_MODE_SUPPORT	BIT(5)
 	u8 latency;
 } __packed;
 
Signature · 1 line
2.44.0.rc1.240.g4c46232300-goog
maintainer Reviewed-by on v4 1/4
#2 lore raw

Re: [PATCH v4 1/4] usb: typec: ucsi: Clean up UCSI_CABLE_PROP macros

Quoted 9 lines · Jameson Thies

Clean up UCSI_CABLE_PROP macros by fixing a bitmask shifting error for plug type and updating the modal support macro for consistent naming.

Fixes 3cf657f07918 ("usb: typec: ucsi: Remove all bit-fields")
Quoted 34 lines

---
Changes in v4:
- None.

Changes in v3:
- Fixed CC stable.

Changes in v2:
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

 drivers/usb/typec/ucsi/ucsi.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/typec/ucsi/ucsi.h +2 -2
index 7e35ffbe0a6f2..469a2baf472e4 100644
@@ -259,12 +259,12 @@ struct ucsi_cable_property {
 #define UCSI_CABLE_PROP_FLAG_VBUS_IN_CABLE	BIT(0)
 #define UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE	BIT(1)
 #define UCSI_CABLE_PROP_FLAG_DIRECTIONALITY	BIT(2)
-#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_)	((_f_) & GENMASK(3, 0))
+#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_)	(((_f_) & GENMASK(4, 3)) >> 3)
 #define   UCSI_CABLE_PROPERTY_PLUG_TYPE_A	0
 #define   UCSI_CABLE_PROPERTY_PLUG_TYPE_B	1
 #define   UCSI_CABLE_PROPERTY_PLUG_TYPE_C	2
 #define   UCSI_CABLE_PROPERTY_PLUG_OTHER	3
-#define UCSI_CABLE_PROP_MODE_SUPPORT		BIT(5)
+#define UCSI_CABLE_PROP_FLAG_MODE_SUPPORT	BIT(5)
 	u8 latency;
 } __packed;
 
Signature · 1 line
2.44.0.rc1.240.g4c46232300-goog
Signature · 1 line
heikki
#3 lore raw

PATCH v4 2/4 usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY

In reply to Jameson Thies

Register cables with the Type-C Connector Class in the UCSI driver based on the PPM response to GET_CABLE_PROPERTY. Registered cable properties include plug type, cable type and major revision.

---
Expected cable properties populate the USB Type-C connector class sysfs paths:
nospike-rev4 /sys/class/typec # ls port0-cable
device identity plug_type port0-plug0 power subsystem type uevent usb_power_delivery_revision

Changes in v4:
- None.

Changes in v3:
- None.

Changes in v2:
- Shortened lines to within 80 characters.
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

 drivers/usb/typec/ucsi/ucsi.c | 73 +++++++++++++++++++++++++++++++++++
 drivers/usb/typec/ucsi/ucsi.h |  5 +++
 2 files changed, 78 insertions(+)
drivers/usb/typec/ucsi/ucsi.c +73 -0
index ae105383e69e7..7c84687b5d1a3 100644
@@ -734,6 +734,52 @@ static void ucsi_unregister_partner_pdos(struct ucsi_connector *con)
 	con->partner_pd = NULL;
 }
 
+static int ucsi_register_cable(struct ucsi_connector *con)
+{
+	struct typec_cable *cable;
+	struct typec_cable_desc desc = {};
+
+	switch (UCSI_CABLE_PROP_FLAG_PLUG_TYPE(con->cable_prop.flags)) {
+	case UCSI_CABLE_PROPERTY_PLUG_TYPE_A:
+		desc.type = USB_PLUG_TYPE_A;
+		break;
+	case UCSI_CABLE_PROPERTY_PLUG_TYPE_B:
+		desc.type = USB_PLUG_TYPE_B;
+		break;
+	case UCSI_CABLE_PROPERTY_PLUG_TYPE_C:
+		desc.type = USB_PLUG_TYPE_C;
+		break;
+	default:
+		desc.type = USB_PLUG_NONE;
+		break;
+	}
+
+	desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE &
+			 con->cable_prop.flags);
+	desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(
+	    con->cable_prop.flags);
+
+	cable = typec_register_cable(con->port, &desc);
+	if (IS_ERR(cable)) {
+		dev_err(con->ucsi->dev,
+			"con%d: failed to register cable (%ld)\n", con->num,
+			PTR_ERR(cable));
+		return PTR_ERR(cable);
+	}
+
+	con->cable = cable;
+	return 0;
+}
+
+static void ucsi_unregister_cable(struct ucsi_connector *con)
+{
+	if (!con->cable)
+		return;
+
+	typec_unregister_cable(con->cable);
+	con->cable = NULL;
+}
+
 static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
 {
 	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
@@ -807,6 +853,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
 	typec_partner_set_usb_power_delivery(con->partner, NULL);
 	ucsi_unregister_partner_pdos(con);
 	ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
+	ucsi_unregister_cable(con);
 	typec_unregister_partner(con->partner);
 	con->partner = NULL;
 }
@@ -907,6 +954,30 @@ static int ucsi_check_connection(struct ucsi_connector *con)
 	return 0;
 }
 
+static int ucsi_check_cable(struct ucsi_connector *con)
+{
+	u64 command;
+	int ret;
+
+	if (con->cable)
+		return 0;
+
+	command = UCSI_GET_CABLE_PROPERTY | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(con->ucsi, command, &con->cable_prop,
+				sizeof(con->cable_prop));
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "GET_CABLE_PROPERTY failed (%d)\n",
+			ret);
+		return ret;
+	}
+
+	ret = ucsi_register_cable(con);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 static void ucsi_handle_connector_change(struct work_struct *work)
 {
 	struct ucsi_connector *con = container_of(work, struct ucsi_connector,
@@ -948,6 +1019,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 			ucsi_register_partner(con);
 			ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
 			ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
+			ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
 
 			if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
 			    UCSI_CONSTAT_PWR_OPMODE_PD)
@@ -1346,6 +1418,7 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
 		ucsi_register_partner(con);
 		ucsi_pwr_opmode_change(con);
 		ucsi_port_psy_changed(con);
+		ucsi_check_cable(con);
 	}
 
 	/* Only notify USB controller if partner supports USB data */
drivers/usb/typec/ucsi/ucsi.h +5 -0
index 469a2baf472e4..f0aabef0b7c64 100644
@@ -265,6 +265,9 @@ struct ucsi_cable_property {
 #define   UCSI_CABLE_PROPERTY_PLUG_TYPE_C	2
 #define   UCSI_CABLE_PROPERTY_PLUG_OTHER	3
 #define UCSI_CABLE_PROP_FLAG_MODE_SUPPORT	BIT(5)
+#define UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV(_f_)	(((_f_) & GENMASK(7, 6)) >> 6)
+#define UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(_f_) \
+	UCSI_SPEC_REVISION_TO_BCD(UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV(_f_))
 	u8 latency;
 } __packed;
 
@@ -400,6 +403,7 @@ struct ucsi_connector {
 
 	struct typec_port *port;
 	struct typec_partner *partner;
+	struct typec_cable *cable;
 
 	struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
 	struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
@@ -408,6 +412,7 @@ struct ucsi_connector {
 
 	struct ucsi_connector_status status;
 	struct ucsi_connector_capability cap;
+	struct ucsi_cable_property cable_prop;
 	struct power_supply *psy;
 	struct power_supply_desc psy_desc;
 	u32 rdo;
Signature · 1 line
2.44.0.rc1.240.g4c46232300-goog
#4 lore raw

Re: [PATCH v4 2/4] usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY

Hi,

Quoted 22 lines · Jameson Thies

Register cables with the Type-C Connector Class in the UCSI driver based on the PPM response to GET_CABLE_PROPERTY. Registered cable properties include plug type, cable type and major revision.

---
Expected cable properties populate the USB Type-C connector class sysfs paths:
nospike-rev4 /sys/class/typec # ls port0-cable
device identity plug_type port0-plug0 power subsystem type uevent usb_power_delivery_revision

Changes in v4:
- None.

Changes in v3:
- None.

Quoted 7 lines

Changes in v2:
- Shortened lines to within 80 characters.
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

  drivers/usb/typec/ucsi/ucsi.c | 73 +++++++++++++++++++++++++++++++++++
  drivers/usb/typec/ucsi/ucsi.h |  5 +++
  2 files changed, 78 insertions(+)

Since those were merged, I see the following errors on SM8550-QRD and SM8650-QRD running linux-next:

[    8.668966] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: UCSI_GET_PD_MESSAGE failed (-95)
[   11.170560] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CABLE_PROPERTY failed (-95)
[   16.361678] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response
[   21.409633] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: error -ETIMEDOUT: PPM init failed

perhaps you should check the GET_CAPABILITY.bmOptionalFeatures bit 5 (Cable details supported) and 8 (GET_PD_MESSAGE supported) before sending UCSI_GET_PD_MESSAGE and GET_CABLE_PROPERTY messages ?

With:
=================><====================================

drivers/usb/typec/ucsi/ucsi.c +8 -4
index cf52cb34d285..eec64a4c8cdd 100644
@@ -1189,8 +1189,10 @@ static void ucsi_handle_connector_change(struct work_struct *work)
                        ucsi_register_partner(con);
                        ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
                        ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
-                       ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
-                       ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
+                       if (con->ucsi->cap.features & UCSI_CAP_GET_PD_MESSAGE)
+                               ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
+                       if (con->ucsi->cap.features & UCSI_CAP_CABLE_DETAILS)
+                               ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
 
                        if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
                            UCSI_CONSTAT_PWR_OPMODE_PD)
@@ -1589,8 +1591,10 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
                ucsi_register_partner(con);
                ucsi_pwr_opmode_change(con);
                ucsi_port_psy_changed(con);
-               ucsi_get_partner_identity(con);
-               ucsi_check_cable(con);
+               if (con->ucsi->cap.features & UCSI_CAP_GET_PD_MESSAGE)
+                       ucsi_get_partner_identity(con);
+               if (con->ucsi->cap.features & UCSI_CAP_CABLE_DETAILS)
+                       ucsi_check_cable(con);
        }
 
        /* Only notify USB controller if partner supports USB data */
drivers/usb/typec/ucsi/ucsi.h +1 -0
index 32daf5f58650..2e9c35a3af27 100644
@@ -215,6 +215,7 @@ struct ucsi_capability {
 #define UCSI_CAP_CABLE_DETAILS                 BIT(5)
 #define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS      BIT(6)
 #define UCSI_CAP_PD_RESET                      BIT(7)
+#define UCSI_CAP_GET_PD_MESSAGE                        BIT(8)
        u16 reserved_1;
        u8 num_alt_modes;
        u8 reserved_2;

=================><==================================== it works fine again.

#regzbot introduced: 38ca416597b0

Thanks,
Neil

Quoted 143 lines
drivers/usb/typec/ucsi/ucsi.c +73 -0
index ae105383e69e7..7c84687b5d1a3 100644
@@ -734,6 +734,52 @@ static void ucsi_unregister_partner_pdos(struct ucsi_connector *con)
  	con->partner_pd = NULL;
  }
 
+static int ucsi_register_cable(struct ucsi_connector *con)
+{
+	struct typec_cable *cable;
+	struct typec_cable_desc desc = {};
+
+	switch (UCSI_CABLE_PROP_FLAG_PLUG_TYPE(con->cable_prop.flags)) {
+	case UCSI_CABLE_PROPERTY_PLUG_TYPE_A:
+		desc.type = USB_PLUG_TYPE_A;
+		break;
+	case UCSI_CABLE_PROPERTY_PLUG_TYPE_B:
+		desc.type = USB_PLUG_TYPE_B;
+		break;
+	case UCSI_CABLE_PROPERTY_PLUG_TYPE_C:
+		desc.type = USB_PLUG_TYPE_C;
+		break;
+	default:
+		desc.type = USB_PLUG_NONE;
+		break;
+	}
+
+	desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE &
+			 con->cable_prop.flags);
+	desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(
+	    con->cable_prop.flags);
+
+	cable = typec_register_cable(con->port, &desc);
+	if (IS_ERR(cable)) {
+		dev_err(con->ucsi->dev,
+			"con%d: failed to register cable (%ld)\n", con->num,
+			PTR_ERR(cable));
+		return PTR_ERR(cable);
+	}
+
+	con->cable = cable;
+	return 0;
+}
+
+static void ucsi_unregister_cable(struct ucsi_connector *con)
+{
+	if (!con->cable)
+		return;
+
+	typec_unregister_cable(con->cable);
+	con->cable = NULL;
+}
+
  static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
  {
  	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
@@ -807,6 +853,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
  	typec_partner_set_usb_power_delivery(con->partner, NULL);
  	ucsi_unregister_partner_pdos(con);
  	ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
+	ucsi_unregister_cable(con);
  	typec_unregister_partner(con->partner);
  	con->partner = NULL;
  }
@@ -907,6 +954,30 @@ static int ucsi_check_connection(struct ucsi_connector *con)
  	return 0;
  }
 
+static int ucsi_check_cable(struct ucsi_connector *con)
+{
+	u64 command;
+	int ret;
+
+	if (con->cable)
+		return 0;
+
+	command = UCSI_GET_CABLE_PROPERTY | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(con->ucsi, command, &con->cable_prop,
+				sizeof(con->cable_prop));
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "GET_CABLE_PROPERTY failed (%d)\n",
+			ret);
+		return ret;
+	}
+
+	ret = ucsi_register_cable(con);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
  static void ucsi_handle_connector_change(struct work_struct *work)
  {
  	struct ucsi_connector *con = container_of(work, struct ucsi_connector,
@@ -948,6 +1019,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
  			ucsi_register_partner(con);
  			ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
  			ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
+			ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
 
  			if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
  			    UCSI_CONSTAT_PWR_OPMODE_PD)
@@ -1346,6 +1418,7 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
  		ucsi_register_partner(con);
  		ucsi_pwr_opmode_change(con);
  		ucsi_port_psy_changed(con);
+		ucsi_check_cable(con);
  	}
 
  	/* Only notify USB controller if partner supports USB data */
drivers/usb/typec/ucsi/ucsi.h +5 -0
index 469a2baf472e4..f0aabef0b7c64 100644
@@ -265,6 +265,9 @@ struct ucsi_cable_property {
  #define   UCSI_CABLE_PROPERTY_PLUG_TYPE_C	2
  #define   UCSI_CABLE_PROPERTY_PLUG_OTHER	3
  #define UCSI_CABLE_PROP_FLAG_MODE_SUPPORT	BIT(5)
+#define UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV(_f_)	(((_f_) & GENMASK(7, 6)) >> 6)
+#define UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(_f_) \
+	UCSI_SPEC_REVISION_TO_BCD(UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV(_f_))
  	u8 latency;
  } __packed;
 
@@ -400,6 +403,7 @@ struct ucsi_connector {
 
  	struct typec_port *port;
  	struct typec_partner *partner;
+	struct typec_cable *cable;
 
  	struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
  	struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
@@ -408,6 +412,7 @@ struct ucsi_connector {
 
  	struct ucsi_connector_status status;
  	struct ucsi_connector_capability cap;
+	struct ucsi_cable_property cable_prop;
  	struct power_supply *psy;
  	struct power_supply_desc psy_desc;
  	u32 rdo;
#5 lore raw

Re: [PATCH v4 2/4] usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY

Hi Neil,
thanks for catching this. You're right, the UCSI driver doesn't need to be sending these commands when they are not supported. I'll post a followup patch properly gating ucsi_get_partner_identity and ucsi_check_cable.

Thanks,
Jameson

#6 lore raw

Re: [PATCH v4 2/4] usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY

In reply to [email protected]
Quoted 1 line · On Mon, Mar 11, 2024 at 06:28:41PM +0100, [email protected] wrote:

On 05/03/2024 03:58, Jameson Thies wrote:

[..]

Quoted 44 lines

With:
=================><====================================

drivers/usb/typec/ucsi/ucsi.c +8 -4
index cf52cb34d285..eec64a4c8cdd 100644
@@ -1189,8 +1189,10 @@ static void ucsi_handle_connector_change(struct work_struct *work)
                        ucsi_register_partner(con);
                        ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
                        ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
-                       ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
-                       ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
+                       if (con->ucsi->cap.features & UCSI_CAP_GET_PD_MESSAGE)
+                               ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
+                       if (con->ucsi->cap.features & UCSI_CAP_CABLE_DETAILS)
+                               ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
 
                        if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
                            UCSI_CONSTAT_PWR_OPMODE_PD)
@@ -1589,8 +1591,10 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
                ucsi_register_partner(con);
                ucsi_pwr_opmode_change(con);
                ucsi_port_psy_changed(con);
-               ucsi_get_partner_identity(con);
-               ucsi_check_cable(con);
+               if (con->ucsi->cap.features & UCSI_CAP_GET_PD_MESSAGE)
+                       ucsi_get_partner_identity(con);
+               if (con->ucsi->cap.features & UCSI_CAP_CABLE_DETAILS)
+                       ucsi_check_cable(con);
        }
 
        /* Only notify USB controller if partner supports USB data */
drivers/usb/typec/ucsi/ucsi.h +1 -0
index 32daf5f58650..2e9c35a3af27 100644
@@ -215,6 +215,7 @@ struct ucsi_capability {
 #define UCSI_CAP_CABLE_DETAILS                 BIT(5)
 #define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS      BIT(6)
 #define UCSI_CAP_PD_RESET                      BIT(7)
+#define UCSI_CAP_GET_PD_MESSAGE                        BIT(8)
        u16 reserved_1;
        u8 num_alt_modes;
        u8 reserved_2;
Quoted 3 lines

=================><==================================== it works fine again.

The series broke role switching on qcs6490-rb3gen2 (next-20240326 is broken). You're proposed addition brings it back, thank you.

Was this posted somewhere?

Regards,
Bjorn

#8 lore raw

PATCH v4 3/4 usb: typec: ucsi: Register SOP/SOP' Discover Identity Responses

In reply to Jameson Thies

Register SOP and SOP' Discover Identity responses with the USB Type-C Connector Class as partner and cable identities, respectively. Discover Identity responses are requested from the PPM using the GET_PD_MESSAGE UCSI command.

---
GET_PD_MESSAGE responses from the PPM populate partner and cable identity in sysfs:
nospike-rev4 /sys/class/typec # ls port0-partner/identity/ cert_stat id_header product product_type_vdo1 product_type_vdo2 product_type_vdo3
nospike-rev4 /sys/class/typec # ls port0-cable/identity/ cert_stat id_header product product_type_vdo1 product_type_vdo2 product_type_vdo3

Changes in v4:
- Cleaned up redundent ucsi_send_command calls for discovering identity.

Changes in v3:
- None.

Changes in v2:
- Re-ordered memset call and null assignment when unregistering partners and cables.
- Supports registering partner and cable identity with UCSI versions before v2.0.
- Shortened lines to within 80 characters with the exception of two error log lines with three indentations.
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

drivers/usb/typec/ucsi/ucsi.c | 112 ++++++++++++++++++++++++++++++++++

 drivers/usb/typec/ucsi/ucsi.h |  29 +++++++++
 2 files changed, 141 insertions(+)
drivers/usb/typec/ucsi/ucsi.c +112 -0
index 7c84687b5d1a3..3b64a0f51041c 100644
@@ -646,6 +646,108 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con)
 	return ret;
 }
 
+static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient,
+			      u8 offset, u8 bytes, void *resp)
+{
+	struct ucsi *ucsi = con->ucsi;
+	u64 command;
+	int ret;
+
+	command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
+	    UCSI_CONNECTOR_NUMBER(con->num);
+	command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
+	command |= UCSI_GET_PD_MESSAGE_OFFSET(offset);
+	command |= UCSI_GET_PD_MESSAGE_BYTES(bytes);
+	command |= UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
+
+	ret = ucsi_send_command(ucsi, command, resp, bytes);
+	if (ret < 0)
+		dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int ucsi_get_identity(struct ucsi_connector *con, u8 recipient,
+			      struct usb_pd_identity *id)
+{
+	struct ucsi *ucsi = con->ucsi;
+	struct ucsi_pd_message_disc_id resp = {};
+	int ret;
+
+	if (ucsi->version < UCSI_VERSION_2_0) {
+		/*
+		 * Before UCSI v2.0, MESSAGE_IN is 16 bytes which cannot fit
+		 * the 28 byte identity response including the VDM header.
+		 * First request the VDM header, ID Header VDO, Cert Stat VDO
+		 * and Product VDO.
+		 */
+		ret = ucsi_read_identity(con, recipient, 0, 0x10, &resp);
+		if (ret < 0)
+			return ret;
+
+
+		/* Then request Product Type VDO1 through Product Type VDO3. */
+		ret = ucsi_read_identity(con, recipient, 0x10, 0xc,
+					 &resp.vdo[0]);
+		if (ret < 0)
+			return ret;
+
+	} else {
+		/*
+		 * In UCSI v2.0 and after, MESSAGE_IN is large enough to request
+		 * the large enough to request the full Discover Identity
+		 * response at once.
+		 */
+		ret = ucsi_read_identity(con, recipient, 0x0, 0x1c, &resp);
+		if (ret < 0)
+			return ret;
+	}
+
+	id->id_header = resp.id_header;
+	id->cert_stat = resp.cert_stat;
+	id->product = resp.product;
+	id->vdo[0] = resp.vdo[0];
+	id->vdo[1] = resp.vdo[1];
+	id->vdo[2] = resp.vdo[2];
+	return 0;
+}
+
+static int ucsi_get_partner_identity(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP,
+				 &con->partner_identity);
+	if (ret < 0)
+		return ret;
+
+	ret = typec_partner_set_identity(con->partner);
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n",
+			ret);
+	}
+
+	return ret;
+}
+
+static int ucsi_get_cable_identity(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP_P,
+				 &con->cable_identity);
+	if (ret < 0)
+		return ret;
+
+	ret = typec_cable_set_identity(con->cable);
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n",
+			ret);
+	}
+
+	return ret;
+}
+
 static int ucsi_check_altmodes(struct ucsi_connector *con)
 {
 	int ret, num_partner_am;
@@ -754,6 +856,7 @@ static int ucsi_register_cable(struct ucsi_connector *con)
 		break;
 	}
 
+	desc.identity = &con->cable_identity;
 	desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE &
 			 con->cable_prop.flags);
 	desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(
@@ -777,6 +880,7 @@ static void ucsi_unregister_cable(struct ucsi_connector *con)
 		return;
 
 	typec_unregister_cable(con->cable);
+	memset(&con->cable_identity, 0, sizeof(con->cable_identity));
 	con->cable = NULL;
 }
 
@@ -827,6 +931,7 @@ static int ucsi_register_partner(struct ucsi_connector *con)
 		break;
 	}
 
+	desc.identity = &con->partner_identity;
 	desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD;
 	desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags);
 
@@ -855,6 +960,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
 	ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
 	ucsi_unregister_cable(con);
 	typec_unregister_partner(con->partner);
+	memset(&con->partner_identity, 0, sizeof(con->partner_identity));
 	con->partner = NULL;
 }
 
@@ -975,6 +1081,10 @@ static int ucsi_check_cable(struct ucsi_connector *con)
 	if (ret < 0)
 		return ret;
 
+	ret = ucsi_get_cable_identity(con);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
@@ -1019,6 +1129,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 			ucsi_register_partner(con);
 			ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
 			ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
+			ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
 			ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
 
 			if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
@@ -1418,6 +1529,7 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
 		ucsi_register_partner(con);
 		ucsi_pwr_opmode_change(con);
 		ucsi_port_psy_changed(con);
+		ucsi_get_partner_identity(con);
 		ucsi_check_cable(con);
 	}
 
drivers/usb/typec/ucsi/ucsi.h +29 -0
index f0aabef0b7c64..b89fae82e8ce7 100644
@@ -106,6 +106,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
 #define UCSI_GET_CABLE_PROPERTY		0x11
 #define UCSI_GET_CONNECTOR_STATUS	0x12
 #define UCSI_GET_ERROR_STATUS		0x13
+#define UCSI_GET_PD_MESSAGE		0x15
 
 #define UCSI_CONNECTOR_NUMBER(_num_)		((u64)(_num_) << 16)
 #define UCSI_COMMAND(_cmd_)			((_cmd_) & 0xff)
@@ -159,6 +160,18 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
 #define UCSI_MAX_PDOS				(4)
 #define UCSI_GET_PDOS_SRC_PDOS			((u64)1 << 34)
 
+/* GET_PD_MESSAGE command bits */
+#define UCSI_GET_PD_MESSAGE_RECIPIENT(_r_)	((u64)(_r_) << 23)
+#define UCSI_GET_PD_MESSAGE_OFFSET(_r_)		((u64)(_r_) << 26)
+#define UCSI_GET_PD_MESSAGE_BYTES(_r_)		((u64)(_r_) << 34)
+#define UCSI_GET_PD_MESSAGE_TYPE(_r_)		((u64)(_r_) << 42)
+#define   UCSI_GET_PD_MESSAGE_TYPE_SNK_CAP_EXT	0
+#define   UCSI_GET_PD_MESSAGE_TYPE_SRC_CAP_EXT	1
+#define   UCSI_GET_PD_MESSAGE_TYPE_BAT_CAP	2
+#define   UCSI_GET_PD_MESSAGE_TYPE_BAT_STAT	3
+#define   UCSI_GET_PD_MESSAGE_TYPE_IDENTITY	4
+#define   UCSI_GET_PD_MESSAGE_TYPE_REVISION	5
+
 /* -------------------------------------------------------------------------- */
 
 /* Error information returned by PPM in response to GET_ERROR_STATUS command. */
@@ -338,6 +351,18 @@ struct ucsi_connector_status {
 	((get_unaligned_le32(&(_p_)[5]) & GENMASK(16, 1)) >> 1)
 } __packed;
 
+/*
+ * Data structure filled by PPM in response to GET_PD_MESSAGE command with the
+ * Response Message Type set to Discover Identity Response.
+ */
+struct ucsi_pd_message_disc_id {
+	u32 vdm_header;
+	u32 id_header;
+	u32 cert_stat;
+	u32 product;
+	u32 vdo[3];
+} __packed;
+
 /* -------------------------------------------------------------------------- */
 
 struct ucsi_debugfs_entry {
@@ -428,6 +453,10 @@ struct ucsi_connector {
 	struct usb_power_delivery_capabilities *partner_sink_caps;
 
 	struct usb_role_switch *usb_role_sw;
+
+	/* USB PD identity */
+	struct usb_pd_identity partner_identity;
+	struct usb_pd_identity cable_identity;
 };
 
 int ucsi_send_command(struct ucsi *ucsi, u64 command,
Signature · 1 line
2.44.0.rc1.240.g4c46232300-goog
Reviewed-by on v4 3/4
#9 lore raw

Re: [PATCH v4 3/4] usb: typec: ucsi: Register SOP/SOP' Discover Identity Responses

Hi Jameson,

Quoted 6 lines · Jameson Thies

Register SOP and SOP' Discover Identity responses with the USB Type-C Connector Class as partner and cable identities, respectively. Discover Identity responses are requested from the PPM using the GET_PD_MESSAGE UCSI command.

Quoted 265 lines

---
GET_PD_MESSAGE responses from the PPM populate partner and cable identity in sysfs:
nospike-rev4 /sys/class/typec # ls port0-partner/identity/ cert_stat id_header product product_type_vdo1 product_type_vdo2 product_type_vdo3
nospike-rev4 /sys/class/typec # ls port0-cable/identity/ cert_stat id_header product product_type_vdo1 product_type_vdo2 product_type_vdo3

Changes in v4:
- Cleaned up redundent ucsi_send_command calls for discovering identity.

Changes in v3:
- None.

Changes in v2:
- Re-ordered memset call and null assignment when unregistering partners and cables.
- Supports registering partner and cable identity with UCSI versions before v2.0.
- Shortened lines to within 80 characters with the exception of two error log lines with three indentations.
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

drivers/usb/typec/ucsi/ucsi.c | 112 ++++++++++++++++++++++++++++++++++

 drivers/usb/typec/ucsi/ucsi.h |  29 +++++++++
 2 files changed, 141 insertions(+)
drivers/usb/typec/ucsi/ucsi.c +112 -0
index 7c84687b5d1a3..3b64a0f51041c 100644
@@ -646,6 +646,108 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con)
 	return ret;
 }
 
+static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient,
+			      u8 offset, u8 bytes, void *resp)
+{
+	struct ucsi *ucsi = con->ucsi;
+	u64 command;
+	int ret;
+
+	command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
+	    UCSI_CONNECTOR_NUMBER(con->num);
+	command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
+	command |= UCSI_GET_PD_MESSAGE_OFFSET(offset);
+	command |= UCSI_GET_PD_MESSAGE_BYTES(bytes);
+	command |= UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
+
+	ret = ucsi_send_command(ucsi, command, resp, bytes);
+	if (ret < 0)
+		dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int ucsi_get_identity(struct ucsi_connector *con, u8 recipient,
+			      struct usb_pd_identity *id)
+{
+	struct ucsi *ucsi = con->ucsi;
+	struct ucsi_pd_message_disc_id resp = {};
+	int ret;
+
+	if (ucsi->version < UCSI_VERSION_2_0) {
+		/*
+		 * Before UCSI v2.0, MESSAGE_IN is 16 bytes which cannot fit
+		 * the 28 byte identity response including the VDM header.
+		 * First request the VDM header, ID Header VDO, Cert Stat VDO
+		 * and Product VDO.
+		 */
+		ret = ucsi_read_identity(con, recipient, 0, 0x10, &resp);
+		if (ret < 0)
+			return ret;
+
+
+		/* Then request Product Type VDO1 through Product Type VDO3. */
+		ret = ucsi_read_identity(con, recipient, 0x10, 0xc,
+					 &resp.vdo[0]);
+		if (ret < 0)
+			return ret;
+
+	} else {
+		/*
+		 * In UCSI v2.0 and after, MESSAGE_IN is large enough to request
+		 * the large enough to request the full Discover Identity
+		 * response at once.
+		 */
+		ret = ucsi_read_identity(con, recipient, 0x0, 0x1c, &resp);
+		if (ret < 0)
+			return ret;
+	}
+
+	id->id_header = resp.id_header;
+	id->cert_stat = resp.cert_stat;
+	id->product = resp.product;
+	id->vdo[0] = resp.vdo[0];
+	id->vdo[1] = resp.vdo[1];
+	id->vdo[2] = resp.vdo[2];
+	return 0;
+}
+
+static int ucsi_get_partner_identity(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP,
+				 &con->partner_identity);
+	if (ret < 0)
+		return ret;
+
+	ret = typec_partner_set_identity(con->partner);
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n",
+			ret);
+	}
+
+	return ret;
+}
+
+static int ucsi_get_cable_identity(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP_P,
+				 &con->cable_identity);
+	if (ret < 0)
+		return ret;
+
+	ret = typec_cable_set_identity(con->cable);
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n",
+			ret);
+	}
+
+	return ret;
+}
+
 static int ucsi_check_altmodes(struct ucsi_connector *con)
 {
 	int ret, num_partner_am;
@@ -754,6 +856,7 @@ static int ucsi_register_cable(struct ucsi_connector *con)
 		break;
 	}
 
+	desc.identity = &con->cable_identity;
 	desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE &
 			 con->cable_prop.flags);
 	desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(
@@ -777,6 +880,7 @@ static void ucsi_unregister_cable(struct ucsi_connector *con)
 		return;
 
 	typec_unregister_cable(con->cable);
+	memset(&con->cable_identity, 0, sizeof(con->cable_identity));
 	con->cable = NULL;
 }
 
@@ -827,6 +931,7 @@ static int ucsi_register_partner(struct ucsi_connector *con)
 		break;
 	}
 
+	desc.identity = &con->partner_identity;
 	desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD;
 	desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags);
 
@@ -855,6 +960,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
 	ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
 	ucsi_unregister_cable(con);
 	typec_unregister_partner(con->partner);
+	memset(&con->partner_identity, 0, sizeof(con->partner_identity));
 	con->partner = NULL;
 }
 
@@ -975,6 +1081,10 @@ static int ucsi_check_cable(struct ucsi_connector *con)
 	if (ret < 0)
 		return ret;
 
+	ret = ucsi_get_cable_identity(con);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
@@ -1019,6 +1129,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 			ucsi_register_partner(con);
 			ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
 			ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
+			ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
 			ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
 
 			if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
@@ -1418,6 +1529,7 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
 		ucsi_register_partner(con);
 		ucsi_pwr_opmode_change(con);
 		ucsi_port_psy_changed(con);
+		ucsi_get_partner_identity(con);
 		ucsi_check_cable(con);
 	}
 
drivers/usb/typec/ucsi/ucsi.h +29 -0
index f0aabef0b7c64..b89fae82e8ce7 100644
@@ -106,6 +106,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
 #define UCSI_GET_CABLE_PROPERTY		0x11
 #define UCSI_GET_CONNECTOR_STATUS	0x12
 #define UCSI_GET_ERROR_STATUS		0x13
+#define UCSI_GET_PD_MESSAGE		0x15
 
 #define UCSI_CONNECTOR_NUMBER(_num_)		((u64)(_num_) << 16)
 #define UCSI_COMMAND(_cmd_)			((_cmd_) & 0xff)
@@ -159,6 +160,18 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
 #define UCSI_MAX_PDOS				(4)
 #define UCSI_GET_PDOS_SRC_PDOS			((u64)1 << 34)
 
+/* GET_PD_MESSAGE command bits */
+#define UCSI_GET_PD_MESSAGE_RECIPIENT(_r_)	((u64)(_r_) << 23)
+#define UCSI_GET_PD_MESSAGE_OFFSET(_r_)		((u64)(_r_) << 26)
+#define UCSI_GET_PD_MESSAGE_BYTES(_r_)		((u64)(_r_) << 34)
+#define UCSI_GET_PD_MESSAGE_TYPE(_r_)		((u64)(_r_) << 42)
+#define   UCSI_GET_PD_MESSAGE_TYPE_SNK_CAP_EXT	0
+#define   UCSI_GET_PD_MESSAGE_TYPE_SRC_CAP_EXT	1
+#define   UCSI_GET_PD_MESSAGE_TYPE_BAT_CAP	2
+#define   UCSI_GET_PD_MESSAGE_TYPE_BAT_STAT	3
+#define   UCSI_GET_PD_MESSAGE_TYPE_IDENTITY	4
+#define   UCSI_GET_PD_MESSAGE_TYPE_REVISION	5
+
 /* -------------------------------------------------------------------------- */
 
 /* Error information returned by PPM in response to GET_ERROR_STATUS command. */
@@ -338,6 +351,18 @@ struct ucsi_connector_status {
 	((get_unaligned_le32(&(_p_)[5]) & GENMASK(16, 1)) >> 1)
 } __packed;
 
+/*
+ * Data structure filled by PPM in response to GET_PD_MESSAGE command with the
+ * Response Message Type set to Discover Identity Response.
+ */
+struct ucsi_pd_message_disc_id {
+	u32 vdm_header;
+	u32 id_header;
+	u32 cert_stat;
+	u32 product;
+	u32 vdo[3];
+} __packed;
+
 /* -------------------------------------------------------------------------- */
 
 struct ucsi_debugfs_entry {
@@ -428,6 +453,10 @@ struct ucsi_connector {
 	struct usb_power_delivery_capabilities *partner_sink_caps;
 
 	struct usb_role_switch *usb_role_sw;
+
+	/* USB PD identity */
+	struct usb_pd_identity partner_identity;
+	struct usb_pd_identity cable_identity;
 };
 
 int ucsi_send_command(struct ucsi *ucsi, u64 command,
Signature · 1 line
2.44.0.rc1.240.g4c46232300-goog
Reviewed-by on v4 3/4
#10 lore raw

Re: [PATCH v4 3/4] usb: typec: ucsi: Register SOP/SOP' Discover Identity Responses

In reply to Jameson Thies
Quoted 6 lines · Jameson Thies

Register SOP and SOP' Discover Identity responses with the USB Type-C Connector Class as partner and cable identities, respectively. Discover Identity responses are requested from the PPM using the GET_PD_MESSAGE UCSI command.

Mostly line splitting nits (which I have listed below). Once those are addressed, please feel free to add:

Quoted 21 lines
drivers/usb/typec/ucsi/ucsi.c +13 -0
index 7c84687b5d1a3..3b64a0f51041c 100644
@@ -646,6 +646,108 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con)
 	return ret;
 }
 
+static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient,
+			      u8 offset, u8 bytes, void *resp)
+{
+	struct ucsi *ucsi = con->ucsi;
+	u64 command;
+	int ret;
+
+	command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
+	    UCSI_CONNECTOR_NUMBER(con->num);
+	command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
+	command |= UCSI_GET_PD_MESSAGE_OFFSET(offset);
+	command |= UCSI_GET_PD_MESSAGE_BYTES(bytes);
+	command |= UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 671

Quoted 10 lines
drivers/usb/typec/ucsi/ucsi.c +10 -0
+
+	ret = ucsi_send_command(ucsi, command, resp, bytes);
+	if (ret < 0)
+		dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int ucsi_get_identity(struct ucsi_connector *con, u8 recipient,
+			      struct usb_pd_identity *id)

nit: Line limits are 100 now [1], so this can fit on one line.

Quoted 10 lines
drivers/usb/typec/ucsi/ucsi.c +10 -0
+{
+	struct ucsi *ucsi = con->ucsi;
+	struct ucsi_pd_message_disc_id resp = {};
+	int ret;
+
+	if (ucsi->version < UCSI_VERSION_2_0) {
+		/*
+		 * Before UCSI v2.0, MESSAGE_IN is 16 bytes which cannot fit
+		 * the 28 byte identity response including the VDM header.
+		 * First request the VDM header, ID Header VDO, Cert Stat VDO

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 691

Quoted 10 lines
drivers/usb/typec/ucsi/ucsi.c +10 -0
+		 * and Product VDO.
+		 */
+		ret = ucsi_read_identity(con, recipient, 0, 0x10, &resp);
+		if (ret < 0)
+			return ret;
+
+
+		/* Then request Product Type VDO1 through Product Type VDO3. */
+		ret = ucsi_read_identity(con, recipient, 0x10, 0xc,
+					 &resp.vdo[0]);

nit: Can fit on one line.

Quoted 19 lines
drivers/usb/typec/ucsi/ucsi.c +19 -0
+		if (ret < 0)
+			return ret;
+
+	} else {
+		/*
+		 * In UCSI v2.0 and after, MESSAGE_IN is large enough to request
+		 * the large enough to request the full Discover Identity
+		 * response at once.
+		 */
+		ret = ucsi_read_identity(con, recipient, 0x0, 0x1c, &resp);
+		if (ret < 0)
+			return ret;
+	}
+
+	id->id_header = resp.id_header;
+	id->cert_stat = resp.cert_stat;
+	id->product = resp.product;
+	id->vdo[0] = resp.vdo[0];
+	id->vdo[1] = resp.vdo[1];

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 720

Quoted 10 lines
drivers/usb/typec/ucsi/ucsi.c +10 -0
+	id->vdo[2] = resp.vdo[2];
+	return 0;
+}
+
+static int ucsi_get_partner_identity(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP,
+				 &con->partner_identity);

nit: One line please.

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 727

Quoted 7 lines
drivers/usb/typec/ucsi/ucsi.c +7 -0
+	if (ret < 0)
+		return ret;
+
+	ret = typec_partner_set_identity(con->partner);
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n",
+			ret);

nit: One line (100 is the limit now).

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 738

Quoted 11 lines
drivers/usb/typec/ucsi/ucsi.c +11 -0
+	}
+
+	return ret;
+}
+
+static int ucsi_get_cable_identity(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP_P,
+				 &con->cable_identity);

nit: One line.

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 745

Quoted 7 lines
drivers/usb/typec/ucsi/ucsi.c +7 -0
+	if (ret < 0)
+		return ret;
+
+	ret = typec_cable_set_identity(con->cable);
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n",
+			ret);

nit: One line.

Best regards,

-Prashant

[1] https://github.com/torvalds/linux/blob/master/scripts/checkpatch.pl#L59

maintainer Reviewed-by
#11 lore raw

Re: [PATCH v4 3/4] usb: typec: ucsi: Register SOP/SOP' Discover Identity Responses

Quoted 11 lines · Prashant Malani
Quoted 6 lines · Jameson Thies

Register SOP and SOP' Discover Identity responses with the USB Type-C Connector Class as partner and cable identities, respectively. Discover Identity responses are requested from the PPM using the GET_PD_MESSAGE UCSI command.

Mostly line splitting nits (which I have listed below). Once those are addressed, please feel free to add:

After you've fixed those add also my:

Quoted 128 lines
Quoted 21 lines
drivers/usb/typec/ucsi/ucsi.c +13 -0
index 7c84687b5d1a3..3b64a0f51041c 100644
@@ -646,6 +646,108 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con)
 	return ret;
 }
 
+static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient,
+			      u8 offset, u8 bytes, void *resp)
+{
+	struct ucsi *ucsi = con->ucsi;
+	u64 command;
+	int ret;
+
+	command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
+	    UCSI_CONNECTOR_NUMBER(con->num);
+	command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
+	command |= UCSI_GET_PD_MESSAGE_OFFSET(offset);
+	command |= UCSI_GET_PD_MESSAGE_BYTES(bytes);
+	command |= UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 671

Quoted 10 lines
drivers/usb/typec/ucsi/ucsi.c +10 -0
+
+	ret = ucsi_send_command(ucsi, command, resp, bytes);
+	if (ret < 0)
+		dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int ucsi_get_identity(struct ucsi_connector *con, u8 recipient,
+			      struct usb_pd_identity *id)

nit: Line limits are 100 now [1], so this can fit on one line.

Quoted 10 lines
drivers/usb/typec/ucsi/ucsi.c +10 -0
+{
+	struct ucsi *ucsi = con->ucsi;
+	struct ucsi_pd_message_disc_id resp = {};
+	int ret;
+
+	if (ucsi->version < UCSI_VERSION_2_0) {
+		/*
+		 * Before UCSI v2.0, MESSAGE_IN is 16 bytes which cannot fit
+		 * the 28 byte identity response including the VDM header.
+		 * First request the VDM header, ID Header VDO, Cert Stat VDO

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 691

Quoted 10 lines
drivers/usb/typec/ucsi/ucsi.c +10 -0
+		 * and Product VDO.
+		 */
+		ret = ucsi_read_identity(con, recipient, 0, 0x10, &resp);
+		if (ret < 0)
+			return ret;
+
+
+		/* Then request Product Type VDO1 through Product Type VDO3. */
+		ret = ucsi_read_identity(con, recipient, 0x10, 0xc,
+					 &resp.vdo[0]);

nit: Can fit on one line.

Quoted 19 lines
drivers/usb/typec/ucsi/ucsi.c +19 -0
+		if (ret < 0)
+			return ret;
+
+	} else {
+		/*
+		 * In UCSI v2.0 and after, MESSAGE_IN is large enough to request
+		 * the large enough to request the full Discover Identity
+		 * response at once.
+		 */
+		ret = ucsi_read_identity(con, recipient, 0x0, 0x1c, &resp);
+		if (ret < 0)
+			return ret;
+	}
+
+	id->id_header = resp.id_header;
+	id->cert_stat = resp.cert_stat;
+	id->product = resp.product;
+	id->vdo[0] = resp.vdo[0];
+	id->vdo[1] = resp.vdo[1];

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 720

Quoted 10 lines
drivers/usb/typec/ucsi/ucsi.c +10 -0
+	id->vdo[2] = resp.vdo[2];
+	return 0;
+}
+
+static int ucsi_get_partner_identity(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP,
+				 &con->partner_identity);

nit: One line please.

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 727

Quoted 7 lines
drivers/usb/typec/ucsi/ucsi.c +7 -0
+	if (ret < 0)
+		return ret;
+
+	ret = typec_partner_set_identity(con->partner);
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n",
+			ret);

nit: One line (100 is the limit now).

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 738

Quoted 11 lines
drivers/usb/typec/ucsi/ucsi.c +11 -0
+	}
+
+	return ret;
+}
+
+static int ucsi_get_cable_identity(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP_P,
+				 &con->cable_identity);

nit: One line.

drivers/usb/typec/ucsi/ucsi.c static int ucsi_get_src_pdos(struct ucsi_connector *con) · line 745

Quoted 7 lines
drivers/usb/typec/ucsi/ucsi.c +7 -0
+	if (ret < 0)
+		return ret;
+
+	ret = typec_cable_set_identity(con->cable);
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n",
+			ret);

nit: One line.

Best regards,

-Prashant

[1] https://github.com/torvalds/linux/blob/master/scripts/checkpatch.pl#L59

Signature · 1 line
heikki
#12 lore raw

PATCH v4 4/4 usb: typec: ucsi: Register SOP' alternate modes with cable plug

In reply to Jameson Thies

Register SOP' alternate modes with a Type-C Connector Class cable plug. Alternate modes are queried from the PPM using the GET_ALTERNATE_MODES command with recipient set to SOP'.

---
SOP' GET_ALTERNATE_MODE responses from the PPM are correctly registered to the cable plug.
nospike-rev4 /sys/class/typec # ls port0-cable/port0-plug0/ device port0-plug0.0 port0-plug0.1 power subsystem uevent

Changes in v4:
- None.

Changes in v3:
- None.

Changes in v2:
- Shortened lines to within 80 characters.
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

 drivers/usb/typec/ucsi/ucsi.c | 60 +++++++++++++++++++++++++++++++++++
 drivers/usb/typec/ucsi/ucsi.h |  2 ++
 2 files changed, 62 insertions(+)
drivers/usb/typec/ucsi/ucsi.c +60 -0
index 3b64a0f51041c..cf52cb34d2859 100644
@@ -399,6 +399,27 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
 
 		con->partner_altmode[i] = alt;
 		break;
+	case UCSI_RECIPIENT_SOP_P:
+		i = ucsi_next_altmode(con->plug_altmode);
+		if (i < 0) {
+			ret = i;
+			goto err;
+		}
+
+		ret = ucsi_altmode_next_mode(con->plug_altmode, desc->svid);
+		if (ret < 0)
+			return ret;
+
+		desc->mode = ret;
+
+		alt = typec_plug_register_altmode(con->plug, desc);
+		if (IS_ERR(alt)) {
+			ret = PTR_ERR(alt);
+			goto err;
+		}
+
+		con->plug_altmode[i] = alt;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -566,6 +587,9 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
 	case UCSI_RECIPIENT_SOP:
 		adev = con->partner_altmode;
 		break;
+	case UCSI_RECIPIENT_SOP_P:
+		adev = con->plug_altmode;
+		break;
 	default:
 		return;
 	}
@@ -836,6 +860,33 @@ static void ucsi_unregister_partner_pdos(struct ucsi_connector *con)
 	con->partner_pd = NULL;
 }
 
+static int ucsi_register_plug(struct ucsi_connector *con)
+{
+	struct typec_plug *plug;
+	struct typec_plug_desc desc = {.index = TYPEC_PLUG_SOP_P};
+
+	plug = typec_register_plug(con->cable, &desc);
+	if (IS_ERR(plug)) {
+		dev_err(con->ucsi->dev,
+			"con%d: failed to register plug (%ld)\n", con->num,
+			PTR_ERR(plug));
+		return PTR_ERR(plug);
+	}
+
+	con->plug = plug;
+	return 0;
+}
+
+static void ucsi_unregister_plug(struct ucsi_connector *con)
+{
+	if (!con->plug)
+		return;
+
+	ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP_P);
+	typec_unregister_plug(con->plug);
+	con->plug = NULL;
+}
+
 static int ucsi_register_cable(struct ucsi_connector *con)
 {
 	struct typec_cable *cable;
@@ -879,6 +930,7 @@ static void ucsi_unregister_cable(struct ucsi_connector *con)
 	if (!con->cable)
 		return;
 
+	ucsi_unregister_plug(con);
 	typec_unregister_cable(con->cable);
 	memset(&con->cable_identity, 0, sizeof(con->cable_identity));
 	con->cable = NULL;
@@ -1085,6 +1137,14 @@ static int ucsi_check_cable(struct ucsi_connector *con)
 	if (ret < 0)
 		return ret;
 
+	ret = ucsi_register_plug(con);
+	if (ret < 0)
+		return ret;
+
+	ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP_P);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
drivers/usb/typec/ucsi/ucsi.h +2 -0
index b89fae82e8ce7..32daf5f586505 100644
@@ -429,9 +429,11 @@ struct ucsi_connector {
 	struct typec_port *port;
 	struct typec_partner *partner;
 	struct typec_cable *cable;
+	struct typec_plug *plug;
 
 	struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
 	struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
+	struct typec_altmode *plug_altmode[UCSI_MAX_ALTMODES];
 
 	struct typec_capability typec_cap;
 
Signature · 1 line
2.44.0.rc1.240.g4c46232300-goog