i40e: Add support for netlink API
Subsystems (3)
cover i40e: Add support for netlink API
Greetings:
This change adds support for the new netlink APIs to i40e which:
- link queues, NAPI IDs, and IRQs together
- export per-queue stats
This change is inspired by a similar change made to the ice driver commit 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi").
I attempted to replicate the rtnl locking added to the ice driver in commit 080b0c8d6d26 ("ice: Fix ASSERT_RTNL() warning during certain scenarios") in patch 1/1, but there's certainly a good chance I missed a case; so I'd kindly ask reviewers to take a close look at, please.
Thanks,
Joe
Joe Damato (2):
net/i40e: link NAPI instances to queues and IRQs net/i40e: add support for per queue netlink stats
drivers/net/ethernet/intel/i40e/i40e.h | 2 + drivers/net/ethernet/intel/i40e/i40e_main.c | 160 ++++++++++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 + 3 files changed, 166 insertions(+)
Signature · 1 line
2.25.1
PATCH 1/2 net/i40e: link NAPI instances to queues and IRQs
Make i40e compatible with the newly added netlink queue GET APIs.
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \
--do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}'{'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'}
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \
--do napi-get --json '{"id": 162}'{'id': 162, 'ifindex': 3, 'irq': 136}
The above output suggests that irq 136 was allocated for queue 1, which has a NAPI ID of 162.
To double check this is correct, the IRQ to queue mapping can be verified by checking /proc/interrupts:
$ cat /proc/interrupts | grep 136\: | \
awk '{print "irq: " $1 " name " $76}'irq: 136: name i40e-vlan300-TxRx-1
Suggests that queue 1 has IRQ 136, as expected.
--- drivers/net/ethernet/intel/i40e/i40e.h | 2 + drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ 3 files changed, 64 insertions(+)
drivers/net/ethernet/intel/i40e/i40e.h +2 -0
@@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);int i40e_open (struct net_device *netdev);int i40e_close (struct net_device *netdev);int i40e_vsi_open (struct i40e_vsi *vsi); +void i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi);void i40e_vlan_stripping_disable (struct i40e_vsi *vsi);int i40e_add_vlan_all_mac (struct i40e_vsi *vsi,s16 vid);int i40e_vsi_add_vlan (struct i40e_vsi *vsi,u16 vid);
drivers/net/ethernet/intel/i40e/i40e_main.c +58 -0
82 lines not on this page · raw message
drivers/net/ethernet/intel/i40e/i40e_txrx.c +4 -0
@@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring)void i40e_free_tx_resources (struct i40e_ring *tx_ring) {i40e_clean_tx_ring (tx_ring); +i40e_queue_set_napi (tx_ring->vsi, tx_ring->queue_index, +NETDEV_QUEUE_TYPE_TX ,NULL );kfree (tx_ring->tx_bi); tx_ring->tx_bi =NULL ;
@@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring)void i40e_free_rx_resources (struct i40e_ring *rx_ring) {i40e_clean_rx_ring (rx_ring); +i40e_queue_set_napi (rx_ring->vsi, rx_ring->queue_index, +NETDEV_QUEUE_TYPE_RX ,NULL );if (rx_ring->vsi->type ==I40E_VSI_MAIN )xdp_rxq_info_unreg (&rx_ring->xdp_rxq); rx_ring->xdp_prog =NULL ;
Signature · 1 line
2.25.1
Re: [intel-next 1/2] net/i40e: link NAPI instances to queues and IRQs
Quoted 86 lines · Joe Damato
Make i40e compatible with the newly added netlink queue GET APIs.
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}'{'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'}
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do napi-get --json '{"id": 162}'{'id': 162, 'ifindex': 3, 'irq': 136}
The above output suggests that irq 136 was allocated for queue 1, which has a NAPI ID of 162.
To double check this is correct, the IRQ to queue mapping can be verified by checking
/proc/interrupts:$ cat /proc/interrupts | grep 136\: | \ awk '{print "irq: " $1 " name " $76}'irq: 136: name i40e-vlan300-TxRx-1
Suggests that queue 1 has IRQ 136, as expected.
Signed-off-by Joe Damato <[email protected]>--- drivers/net/ethernet/intel/i40e/i40e.h | 2 + drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ 3 files changed, 64 insertions(+)drivers/net/ethernet/intel/i40e/i40e.h +2
-0@@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);int i40e_open (struct net_device *netdev);int i40e_close (struct net_device *netdev);int i40e_vsi_open (struct i40e_vsi *vsi); +void i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi);void i40e_vlan_stripping_disable (struct i40e_vsi *vsi);int i40e_add_vlan_all_mac (struct i40e_vsi *vsi,s16 vid);int i40e_vsi_add_vlan (struct i40e_vsi *vsi,u16 vid);drivers/net/ethernet/intel/i40e/i40e_main.c +33
-0@@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring)return xsk_get_pool_from_qid (ring->vsi->netdev, qid); } +/** +* __i40e_queue_set_napi - Set the napi instance for the queue +* @dev: device to which NAPI and queue belong +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* @locked: is the rtnl_lock already held +* +* Set the napi instance for the queue. Caller indicates the lock status. +*/ +static void +__i40e_queue_set_napi (struct net_device *dev,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi, +bool locked) +{ +if (!locked) +rtnl_lock (); +netif_queue_set_napi (dev, queue_index, type, napi); +if (!locked) +rtnl_unlock (); +} + +/** +* i40e_queue_set_napi - Set the napi instance for the queue +* @vsi: VSI being configured +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* +* Set the napi instance for the queue. The rtnl lock state is derived from the +* execution path. +*/ +void
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3493
Quoted 10 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +10
-0+i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, + enum netdev_queue_type type, struct napi_struct *napi) +{ + struct i40e_pf *pf = vsi->back; + +if (!vsi->netdev) +return ; + + if (current_work() == &pf->service_task || + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) ||
I think we might need something like ICE_PREPARED_FOR_RESET which detects all kinds of resets(PFR/CORE/GLOBR). __I40E_PF_RESET_REQUESTED handles PFR only. So, this might assert for RTNL lock on CORER/GLOBR.
Quoted 13 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +9
-0+ test_bit(__I40E_DOWN, pf->state) || + test_bit(__I40E_SUSPENDED, pf->state)) +__i40e_queue_set_napi (vsi->netdev, queue_index, type, napi, + false); + else + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, +true ); +} +/** * i40e_configure_tx_ring - Configure a transmit ring context and rest * @ring: The Tx ring to configure
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_tx_ring(struct i40e_ring *ring) · line 3614
Quoted 5 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0@@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)/* cache tail off for easier writes later */ ring->tail = hw->hw_addr +I40E_QTX_TAIL (pf_q); +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_TX , + &ring->q_vector->napi);
I am not sure very sure of this, have you tested this for the reset/rebuild path as well (example: ethtool -L and change queues). Just wondering if this path is taken for first time VSI init or additionally for any VSI rebuilds as well.
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_rx_ring(struct i40e_ring *ring) · line 3775
Quoted 10 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0return 0 ; }@@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) ring->queue_index, pf_q); } +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_RX , + &ring->q_vector->napi);
Same as above.
return 0;
Quoted 33 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0}@@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) q_vector->affinity_notify.notify = i40e_irq_affinity_notify; q_vector->affinity_notify.release = i40e_irq_affinity_release;irq_set_affinity_notifier (irq_num, &q_vector->affinity_notify); +netif_napi_set_irq (&q_vector->napi, q_vector->irq_num); +/* Spread affinity hints out across online CPUs. * * get_cpu_mask returns a static constant mask with drivers/net/ethernet/intel/i40e/i40e_txrx.c +4
-0@@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring)void i40e_free_tx_resources (struct i40e_ring *tx_ring) {i40e_clean_tx_ring (tx_ring); +i40e_queue_set_napi (tx_ring->vsi, tx_ring->queue_index, +NETDEV_QUEUE_TYPE_TX ,NULL );kfree (tx_ring->tx_bi); tx_ring->tx_bi =NULL ;@@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring)void i40e_free_rx_resources (struct i40e_ring *rx_ring) {i40e_clean_rx_ring (rx_ring); +i40e_queue_set_napi (rx_ring->vsi, rx_ring->queue_index, +NETDEV_QUEUE_TYPE_RX ,NULL );if (rx_ring->vsi->type ==I40E_VSI_MAIN )xdp_rxq_info_unreg (&rx_ring->xdp_rxq); rx_ring->xdp_prog =NULL ;
Re: [intel-next 1/2] net/i40e: link NAPI instances to queues and IRQs
Quoted 92 lines · Amritha
Quoted 91 lines · Joe Damato
Make i40e compatible with the newly added netlink queue GET APIs.
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}'{'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'}
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do napi-get --json '{"id": 162}'{'id': 162, 'ifindex': 3, 'irq': 136}
The above output suggests that irq 136 was allocated for queue 1, which has a NAPI ID of 162.
To double check this is correct, the IRQ to queue mapping can be verified by checking
/proc/interrupts:$ cat /proc/interrupts | grep 136\: | \ awk '{print "irq: " $1 " name " $76}'irq: 136: name i40e-vlan300-TxRx-1
Suggests that queue 1 has IRQ 136, as expected.
Signed-off-by Joe Damato <[email protected]>--- drivers/net/ethernet/intel/i40e/i40e.h | 2 + drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ 3 files changed, 64 insertions(+)drivers/net/ethernet/intel/i40e/i40e.h +2
-0@@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);int i40e_open (struct net_device *netdev);int i40e_close (struct net_device *netdev);int i40e_vsi_open (struct i40e_vsi *vsi); +void i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi);void i40e_vlan_stripping_disable (struct i40e_vsi *vsi);int i40e_add_vlan_all_mac (struct i40e_vsi *vsi,s16 vid);int i40e_vsi_add_vlan (struct i40e_vsi *vsi,u16 vid);drivers/net/ethernet/intel/i40e/i40e_main.c +39
-0@@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring)return xsk_get_pool_from_qid (ring->vsi->netdev, qid); } +/** +* __i40e_queue_set_napi - Set the napi instance for the queue +* @dev: device to which NAPI and queue belong +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* @locked: is the rtnl_lock already held +* +* Set the napi instance for the queue. Caller indicates the lock status. +*/ +static void +__i40e_queue_set_napi (struct net_device *dev,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi, +bool locked) +{ +if (!locked) +rtnl_lock (); +netif_queue_set_napi (dev, queue_index, type, napi); +if (!locked) +rtnl_unlock (); +} + +/** +* i40e_queue_set_napi - Set the napi instance for the queue +* @vsi: VSI being configured +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* +* Set the napi instance for the queue. The rtnl lock state is derived from the +* execution path. +*/ +void +i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi) +{ +struct i40e_pf *pf = vsi->back; + +if (!vsi->netdev)
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3493
Quoted 4 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +4
-0+return ; + + if (current_work() == &pf->service_task || + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) ||I think we might need something like
ICE_PREPARED_FOR_RESETwhich detects all kinds of resets(PFR/CORE/GLOBR).__I40E_PF_RESET_REQUESTEDhandles PFR only. So, this might assert for RTNL lock on CORER/GLOBR.
The i40e code is a bit tricky so I'm not sure about these cases. Here's what it looks like to me, but hopefully Intel can weigh-in here as well.
As some one who is not an expert in i40e, what follows is a guess that is likely wrong ;)
The __I40E_GLOBAL_RESET_REQUESTED case it looks to me (I could totally be wrong here) that the i40e_reset_subtask calls i40e_rebuild with lock_acquired = false. In this case, we want __i40e_queue_set_napi to pass locked = true (because i40e_rebuild will acquire the lock for us).
The __I40E_CORE_RESET_REQUESTED case appears to be the same as the __I40E_GLOBAL_RESET_REQUESTED case in that i40e_rebuild is called with lock_acquired = false meaning we also want __i40e_queue_set_napi to pass locked = true (because i40e_rebuild will acquire the lock for us).
__I40E_PF_RESET_REQUESTED is more complex.
It seems:
When the __I40E_PF_RESET_REQUESTED bit is set in:
- i40e_handle_lldp_event
- i40e_tx_timeout
- i40e_intr
- i40e_resume_port_tx
- i40e_suspend_port_tx
- i40e_hw_dcb_config
then: i40e_service_event_schedule is called which queues i40e_service_task, which calls i40e_reset_subtask, which clears the __I40E_PF_RESET_REQUESTED bit and calls i40e_do_reset passing lock_acquired = false. In the __I40E_PF_RESET_REQUESTED case, i40e_reset_and_rebuild called with lock_acquired = false again and passed through to i40e_rebuild which will take rtnl on its own. This means in these cases, __i40e_queue_set_napi can pass locked = true.
However...
- i40e_set_features
- i40e_ndo_bridge_setlink
- i40e_create_queue_channel
- i40e_configure_queue_channels
- Error case in i40e_vsi_open
call i40e_do_reset directly and pass lock_acquired = true so i40e_reset_and_rebuild will not take the RTNL.
Important assumption: I assume that passing lock_acquired = true means that the lock really was previously acquired (and not simply unnecessary and not taken ?).
If that is correct, then __i40e_queue_set_napi should also not take the rtnl (e.g. locked = true).
Again, I could be totally off here, but it looks like when:
(current_work() == &pf->service_task) && test_bit(__I40E_PF_RESET_REQUESTED, pf->state)
is true, we want to call __i40e_queue_set_napi with locked = true,
and also all the other cases we want __i40e_queue_set_napi with locked = true
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3500
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +7
-0+ test_bit(__I40E_DOWN, pf->state) || + test_bit(__I40E_SUSPENDED, pf->state)) +__i40e_queue_set_napi (vsi->netdev, queue_index, type, napi, + false); + else + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, +true );
I *think* (but honestly... I have no idea) the correct if statement *might* be something like:
/* __I40E_PF_RESET_REQUESTED via the service_task will
* call i40e_rebuild with lock_acquired = false, causing rtnl to be
* taken, meaning __i40e_queue_set_napi should *NOT* take the lock. *
* __I40E_PF_RESET_REQUESTED when set directly and not via the
* service task, i40e_reset is called with lock_acquired = true,
* implying that the rtnl was already taken (and, more
* specifically, the lock was not simply unnecessary and skipped)
* and so __i40e_queue_set_napi should *NOT* take the lock. *
* __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED
* trigger the service_task (via i40e_intr) which will cause
* i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should
* not acquire it.
*/
if (current_work() == &pf->service_task ||
test_bit(__I40E_PF_RESET_REQUESTED, pf->state) ||
test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) ||
test_bit(__I40E_CORE_RESET_REQUESTED, pf->state))
__i40e_queue_set_napi(vsi->netdev, queue_index, type, napi,
true);
else if (test_bit(__I40E_DOWN, pf->state) ||
test_bit(__I40E_SUSPENDED, pf->state))
__i40e_queue_set_napi(vsi->netdev, queue_index, type, napi,
false);
else
__i40e_queue_set_napi(vsi->netdev, queue_index, type, napi,
true);I suppose to figure this out, I'd need to investigate all cases where i40e_rebuild is called with lock_acquired = true to ensure that the lock was actually acquired (and not just unnecessary).
Unless some one who knows about i40e can answer this question more definitively.
Quoted 7 lines
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0+} +/** * i40e_configure_tx_ring - Configure a transmit ring context and rest * @ring: The Tx ring to configure @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)/* cache tail off for easier writes later */
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_tx_ring(struct i40e_ring *ring) · line 3614
Quoted 3 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0ring->tail = hw->hw_addr +I40E_QTX_TAIL (pf_q); +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_TX , + &ring->q_vector->napi);I am not sure very sure of this, have you tested this for the reset/rebuild path as well (example: ethtool -L and change queues). Just wondering if this path is taken for first time VSI init or additionally for any VSI rebuilds as well.
Can you explain more about what your concern is? I'm not sure I follow. Was the concern just that on rebuild this code path might not be executed because the driver might take a different path?
If so, I traced the code (and tested with ethtool):
When the device is probed:
i40e_probe
i40e_vsi_open
i40e_vsi_configure
i40e_vsi_configure_rx
i40e_configure_rx_ring
i40e_vsi_configure_tx
i40e_configure_tx_ring
When you use ethtool to change the channel count:
i40e_set_channels
i40e_reconfig_rss_queues
i40e_reset_and_rebuild
i40e_rebuild
i40e_pf_unquiesce_all_vsi
i40e_unquiesce_vsi
i40e_vsi_open
[.. the call stack above for i40e_vsi_open ..]
Are those the two paths you had in mind or were there other ones? FWIW, using ethtool to change the channel count followed by using the cli.py returns what appears to be correct data, so I think the ethtool -L case is covered.
Let me know if I am missing any cases you had in mind or if this answers your question.
Quoted 42 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_rx_ring(struct i40e_ring *ring) · line 3774
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0return 0 ; }@@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) ring->queue_index, pf_q); } +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_RX , + &ring->q_vector->napi);Same as above.
return 0;
Quoted 31 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0}@@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) q_vector->affinity_notify.notify = i40e_irq_affinity_notify; q_vector->affinity_notify.release = i40e_irq_affinity_release;irq_set_affinity_notifier (irq_num, &q_vector->affinity_notify); +netif_napi_set_irq (&q_vector->napi, q_vector->irq_num); +/* Spread affinity hints out across online CPUs. * * get_cpu_mask returns a static constant mask with drivers/net/ethernet/intel/i40e/i40e_txrx.c +4
-0@@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring)void i40e_free_tx_resources (struct i40e_ring *tx_ring) {i40e_clean_tx_ring (tx_ring); +i40e_queue_set_napi (tx_ring->vsi, tx_ring->queue_index, +NETDEV_QUEUE_TYPE_TX ,NULL );kfree (tx_ring->tx_bi); tx_ring->tx_bi =NULL ;@@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring)void i40e_free_rx_resources (struct i40e_ring *rx_ring) {i40e_clean_rx_ring (rx_ring); +i40e_queue_set_napi (rx_ring->vsi, rx_ring->queue_index, +NETDEV_QUEUE_TYPE_RX ,NULL );if (rx_ring->vsi->type ==I40E_VSI_MAIN )xdp_rxq_info_unreg (&rx_ring->xdp_rxq); rx_ring->xdp_prog =NULL ;
Re: [intel-next 1/2] net/i40e: link NAPI instances to queues and IRQs
Quoted 204 lines · Joe Damato
Quoted 92 lines · Amritha
Quoted 91 lines · Joe Damato
Make i40e compatible with the newly added netlink queue GET APIs.
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}'{'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'}
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do napi-get --json '{"id": 162}'{'id': 162, 'ifindex': 3, 'irq': 136}
The above output suggests that irq 136 was allocated for queue 1, which has a NAPI ID of 162.
To double check this is correct, the IRQ to queue mapping can be verified by checking
/proc/interrupts:$ cat /proc/interrupts | grep 136\: | \ awk '{print "irq: " $1 " name " $76}'irq: 136: name i40e-vlan300-TxRx-1
Suggests that queue 1 has IRQ 136, as expected.
Signed-off-by Joe Damato <[email protected]>--- drivers/net/ethernet/intel/i40e/i40e.h | 2 + drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ 3 files changed, 64 insertions(+)drivers/net/ethernet/intel/i40e/i40e.h +2
-0@@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);int i40e_open (struct net_device *netdev);int i40e_close (struct net_device *netdev);int i40e_vsi_open (struct i40e_vsi *vsi); +void i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi);void i40e_vlan_stripping_disable (struct i40e_vsi *vsi);int i40e_add_vlan_all_mac (struct i40e_vsi *vsi,s16 vid);int i40e_vsi_add_vlan (struct i40e_vsi *vsi,u16 vid);drivers/net/ethernet/intel/i40e/i40e_main.c +39
-0@@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring)return xsk_get_pool_from_qid (ring->vsi->netdev, qid); } +/** +* __i40e_queue_set_napi - Set the napi instance for the queue +* @dev: device to which NAPI and queue belong +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* @locked: is the rtnl_lock already held +* +* Set the napi instance for the queue. Caller indicates the lock status. +*/ +static void +__i40e_queue_set_napi (struct net_device *dev,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi, +bool locked) +{ +if (!locked) +rtnl_lock (); +netif_queue_set_napi (dev, queue_index, type, napi); +if (!locked) +rtnl_unlock (); +} + +/** +* i40e_queue_set_napi - Set the napi instance for the queue +* @vsi: VSI being configured +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* +* Set the napi instance for the queue. The rtnl lock state is derived from the +* execution path. +*/ +void +i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi) +{ +struct i40e_pf *pf = vsi->back; + +if (!vsi->netdev)Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3493
Quoted 4 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +4
-0+return ; + + if (current_work() == &pf->service_task || + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) ||I think we might need something like
ICE_PREPARED_FOR_RESETwhich detects all kinds of resets(PFR/CORE/GLOBR).__I40E_PF_RESET_REQUESTEDhandles PFR only. So, this might assert for RTNL lock on CORER/GLOBR.The i40e code is a bit tricky so I'm not sure about these cases. Here's what it looks like to me, but hopefully Intel can weigh-in here as well.
As some one who is not an expert in i40e, what follows is a guess that is likely wrong ;)
The
__I40E_GLOBAL_RESET_REQUESTEDcase it looks to me (I could totally be wrong here) that thei40e_reset_subtaskcallsi40e_rebuildwithlock_acquired= false. In this case, we want__i40e_queue_set_napito pass locked = true (becausei40e_rebuildwill acquire the lock for us).The
__I40E_CORE_RESET_REQUESTEDcase appears to be the same as the__I40E_GLOBAL_RESET_REQUESTEDcase in thati40e_rebuildis called withlock_acquired= false meaning we also want__i40e_queue_set_napito pass locked = true (becausei40e_rebuildwill acquire the lock for us).
__I40E_PF_RESET_REQUESTEDis more complex.It seems:
When the__I40E_PF_RESET_REQUESTEDbit is set in:
-i40e_handle_lldp_event
-i40e_tx_timeout
-i40e_intr
-i40e_resume_port_tx
-i40e_suspend_port_tx
-i40e_hw_dcb_configthen:
i40e_service_event_scheduleis called which queuesi40e_service_task, which callsi40e_reset_subtask, which clears the__I40E_PF_RESET_REQUESTEDbit and callsi40e_do_resetpassinglock_acquired= false. In the__I40E_PF_RESET_REQUESTEDcase,i40e_reset_and_rebuild
called withlock_acquired= false again and passed through toi40e_rebuildwhich will take rtnl on its own. This means
in these cases,__i40e_queue_set_napican pass locked = true.However...
-
i40e_set_features
-i40e_ndo_bridge_setlink
-i40e_create_queue_channel
-i40e_configure_queue_channels
- Error case ini40e_vsi_opencall
i40e_do_resetdirectly and passlock_acquired= true soi40e_reset_and_rebuildwill not take the RTNL.Important assumption: I assume that passing
lock_acquired= true means that the lock really was previously acquired (and not simply unnecessary and not taken ?).If that is correct, then
__i40e_queue_set_napishould also not take the rtnl (e.g.
locked = true).Again, I could be totally off here, but it looks like when:
(current_work() == &pf->service_task) && test_bit(__I40E_PF_RESET_REQUESTED, pf->state)is true, we want to call
__i40e_queue_set_napiwith locked = true,and also all the other cases we want
__i40e_queue_set_napiwith locked = trueQuoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3500
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +7
-0+ test_bit(__I40E_DOWN, pf->state) || + test_bit(__I40E_SUSPENDED, pf->state)) +__i40e_queue_set_napi (vsi->netdev, queue_index, type, napi, + false); + else + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, +true );I *think* (but honestly... I have no idea) the correct if statement *might* be something like:
/* __I40E_PF_RESET_REQUESTED via the service_task will * call i40e_rebuild with lock_acquired = false, causing rtnl to be * taken, meaning __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_PF_RESET_REQUESTED when set directly and not via the * service task, i40e_reset is called with lock_acquired = true, * implying that the rtnl was already taken (and, more * specifically, the lock was not simply unnecessary and skipped) * and so __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED * trigger the service_task (via i40e_intr) which will cause * i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should * not acquire it. */ if (current_work() == &pf->service_task || test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || test_bit(__I40E_CORE_RESET_REQUESTED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true); else if (test_bit(__I40E_DOWN, pf->state) || test_bit(__I40E_SUSPENDED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, false); else __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true);
Quoted 7 lines
I suppose to figure this out, I'd need to investigate all cases where
i40e_rebuildis called withlock_acquired= true to ensure that the lock was actually acquired (and not just unnecessary).Unless some one who knows about i40e can answer this question more definitively.
I'll wait for the i40e maintainers to chime in here.
Quoted 43 lines
Quoted 7 lines
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0+} +/** * i40e_configure_tx_ring - Configure a transmit ring context and rest * @ring: The Tx ring to configure @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)/* cache tail off for easier writes later */ Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_tx_ring(struct i40e_ring *ring) · line 3614
Quoted 3 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0ring->tail = hw->hw_addr +I40E_QTX_TAIL (pf_q); +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_TX , + &ring->q_vector->napi);I am not sure very sure of this, have you tested this for the reset/rebuild path as well (example: ethtool -L and change queues). Just wondering if this path is taken for first time VSI init or additionally for any VSI rebuilds as well.
Can you explain more about what your concern is? I'm not sure I follow. Was the concern just that on rebuild this code path might not be executed because the driver might take a different path?
If so, I traced the code (and tested with ethtool):
When the device is probed:
i40e_probe
i40e_vsi_open
i40e_vsi_configure
i40e_vsi_configure_rx
i40e_configure_rx_ring
i40e_vsi_configure_tx
i40e_configure_tx_ringWhen you use ethtool to change the channel count:
i40e_set_channels
i40e_reconfig_rss_queues
i40e_reset_and_rebuild
i40e_rebuild
i40e_pf_unquiesce_all_vsi
i40e_unquiesce_vsi
i40e_vsi_open
[.. the call stack above fori40e_vsi_open..]
Quoted 4 lines
Are those the two paths you had in mind or were there other ones? FWIW, using ethtool to change the channel count followed by using the
cli.pyreturns what appears to be correct data, so I think the ethtool -L case is covered.
Yes, this is what I had mind. Good to know that it is covered.
Quoted 3 lines
Let me know if I am missing any cases you had in mind or if this answers your question.
One other case was the suspend/resume callback. This path involves remapping vectors and rings (just like rebuild after changing channels), If this takes the i40e_rebuild path like before, then we are covered, as your changes are in i40e_vsi_configure. If not, we'll have to add it after re-initializing interrupt scheme .
Quoted 42 lines
Quoted 42 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_rx_ring(struct i40e_ring *ring) · line 3774
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0return 0 ; }@@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) ring->queue_index, pf_q); } +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_RX , + &ring->q_vector->napi);Same as above.
return 0;Quoted 31 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0}@@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) q_vector->affinity_notify.notify = i40e_irq_affinity_notify; q_vector->affinity_notify.release = i40e_irq_affinity_release;irq_set_affinity_notifier (irq_num, &q_vector->affinity_notify); +netif_napi_set_irq (&q_vector->napi, q_vector->irq_num); +/* Spread affinity hints out across online CPUs. * * get_cpu_mask returns a static constant mask with drivers/net/ethernet/intel/i40e/i40e_txrx.c +4
-0@@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring)void i40e_free_tx_resources (struct i40e_ring *tx_ring) {i40e_clean_tx_ring (tx_ring); +i40e_queue_set_napi (tx_ring->vsi, tx_ring->queue_index, +NETDEV_QUEUE_TYPE_TX ,NULL );kfree (tx_ring->tx_bi); tx_ring->tx_bi =NULL ;@@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring)void i40e_free_rx_resources (struct i40e_ring *rx_ring) {i40e_clean_rx_ring (rx_ring); +i40e_queue_set_napi (rx_ring->vsi, rx_ring->queue_index, +NETDEV_QUEUE_TYPE_RX ,NULL );if (rx_ring->vsi->type ==I40E_VSI_MAIN )xdp_rxq_info_unreg (&rx_ring->xdp_rxq); rx_ring->xdp_prog =NULL ;
Re: [intel-next 1/2] net/i40e: link NAPI instances to queues and IRQs
Quoted 209 lines · Amritha
Quoted 208 lines · Joe Damato
Quoted 92 lines · Amritha
Quoted 91 lines · Joe Damato
Make i40e compatible with the newly added netlink queue GET APIs.
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}'{'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'}
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do napi-get --json '{"id": 162}'{'id': 162, 'ifindex': 3, 'irq': 136}
The above output suggests that irq 136 was allocated for queue 1, which has a NAPI ID of 162.
To double check this is correct, the IRQ to queue mapping can be verified by checking
/proc/interrupts:$ cat /proc/interrupts | grep 136\: | \ awk '{print "irq: " $1 " name " $76}'irq: 136: name i40e-vlan300-TxRx-1
Suggests that queue 1 has IRQ 136, as expected.
Signed-off-by Joe Damato <[email protected]>--- drivers/net/ethernet/intel/i40e/i40e.h | 2 + drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ 3 files changed, 64 insertions(+)drivers/net/ethernet/intel/i40e/i40e.h +2
-0@@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);int i40e_open (struct net_device *netdev);int i40e_close (struct net_device *netdev);int i40e_vsi_open (struct i40e_vsi *vsi); +void i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi);void i40e_vlan_stripping_disable (struct i40e_vsi *vsi);int i40e_add_vlan_all_mac (struct i40e_vsi *vsi,s16 vid);int i40e_vsi_add_vlan (struct i40e_vsi *vsi,u16 vid);drivers/net/ethernet/intel/i40e/i40e_main.c +39
-0@@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring)return xsk_get_pool_from_qid (ring->vsi->netdev, qid); } +/** +* __i40e_queue_set_napi - Set the napi instance for the queue +* @dev: device to which NAPI and queue belong +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* @locked: is the rtnl_lock already held +* +* Set the napi instance for the queue. Caller indicates the lock status. +*/ +static void +__i40e_queue_set_napi (struct net_device *dev,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi, +bool locked) +{ +if (!locked) +rtnl_lock (); +netif_queue_set_napi (dev, queue_index, type, napi); +if (!locked) +rtnl_unlock (); +} + +/** +* i40e_queue_set_napi - Set the napi instance for the queue +* @vsi: VSI being configured +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* +* Set the napi instance for the queue. The rtnl lock state is derived from the +* execution path. +*/ +void +i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi) +{ +struct i40e_pf *pf = vsi->back; + +if (!vsi->netdev)Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3493
Quoted 4 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +4
-0+return ; + + if (current_work() == &pf->service_task || + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) ||I think we might need something like
ICE_PREPARED_FOR_RESETwhich detects all kinds of resets(PFR/CORE/GLOBR).__I40E_PF_RESET_REQUESTEDhandles PFR only. So, this might assert for RTNL lock on CORER/GLOBR.The i40e code is a bit tricky so I'm not sure about these cases. Here's what it looks like to me, but hopefully Intel can weigh-in here as well.
As some one who is not an expert in i40e, what follows is a guess that is likely wrong ;)
The
__I40E_GLOBAL_RESET_REQUESTEDcase it looks to me (I could totally be wrong here) that thei40e_reset_subtaskcallsi40e_rebuildwithlock_acquired= false. In this case, we want__i40e_queue_set_napito pass locked = true (becausei40e_rebuildwill acquire the lock for us).The
__I40E_CORE_RESET_REQUESTEDcase appears to be the same as the__I40E_GLOBAL_RESET_REQUESTEDcase in thati40e_rebuildis called withlock_acquired= false meaning we also want__i40e_queue_set_napito pass locked = true (becausei40e_rebuildwill acquire the lock for us).
__I40E_PF_RESET_REQUESTEDis more complex.It seems:
When the__I40E_PF_RESET_REQUESTEDbit is set in:
-i40e_handle_lldp_event
-i40e_tx_timeout
-i40e_intr
-i40e_resume_port_tx
-i40e_suspend_port_tx
-i40e_hw_dcb_configthen:
i40e_service_event_scheduleis called which queuesi40e_service_task, which callsi40e_reset_subtask, which clears the__I40E_PF_RESET_REQUESTEDbit and callsi40e_do_resetpassinglock_acquired= false. In the__I40E_PF_RESET_REQUESTEDcase,i40e_reset_and_rebuild
called withlock_acquired= false again and passed through toi40e_rebuildwhich will take rtnl on its own. This means
in these cases,__i40e_queue_set_napican pass locked = true.However...
-
i40e_set_features
-i40e_ndo_bridge_setlink
-i40e_create_queue_channel
-i40e_configure_queue_channels
- Error case ini40e_vsi_opencall
i40e_do_resetdirectly and passlock_acquired= true soi40e_reset_and_rebuildwill not take the RTNL.Important assumption: I assume that passing
lock_acquired= true means that the lock really was previously acquired (and not simply unnecessary and not taken ?).If that is correct, then
__i40e_queue_set_napishould also not take the rtnl (e.g.
locked = true).Again, I could be totally off here, but it looks like when:
(current_work() == &pf->service_task) && test_bit(__I40E_PF_RESET_REQUESTED, pf->state)is true, we want to call
__i40e_queue_set_napiwith locked = true,and also all the other cases we want
__i40e_queue_set_napiwith locked = trueQuoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3500
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +7
-0+ test_bit(__I40E_DOWN, pf->state) || + test_bit(__I40E_SUSPENDED, pf->state)) +__i40e_queue_set_napi (vsi->netdev, queue_index, type, napi, + false); + else + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, +true );I *think* (but honestly... I have no idea) the correct if statement *might* be something like:
/* __I40E_PF_RESET_REQUESTED via the service_task will * call i40e_rebuild with lock_acquired = false, causing rtnl to be * taken, meaning __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_PF_RESET_REQUESTED when set directly and not via the * service task, i40e_reset is called with lock_acquired = true, * implying that the rtnl was already taken (and, more * specifically, the lock was not simply unnecessary and skipped) * and so __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED * trigger the service_task (via i40e_intr) which will cause * i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should * not acquire it. */ if (current_work() == &pf->service_task || test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || test_bit(__I40E_CORE_RESET_REQUESTED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true); else if (test_bit(__I40E_DOWN, pf->state) || test_bit(__I40E_SUSPENDED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, false); else __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true);I suppose to figure this out, I'd need to investigate all cases where
i40e_rebuildis called withlock_acquired= true to ensure that the lock was actually acquired (and not just unnecessary).
Quoted 5 lines
Quoted 3 lines
Unless some one who knows about i40e can answer this question more definitively.
I'll wait for the i40e maintainers to chime in here.
Based on the findings of I40E_SUSPENDED below, the above if statement is still slightly incorrect, please see below.
Quoted 43 lines
Quoted 43 lines
Quoted 7 lines
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0+} +/** * i40e_configure_tx_ring - Configure a transmit ring context and rest * @ring: The Tx ring to configure @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)/* cache tail off for easier writes later */ Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_tx_ring(struct i40e_ring *ring) · line 3614
Quoted 3 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0ring->tail = hw->hw_addr +I40E_QTX_TAIL (pf_q); +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_TX , + &ring->q_vector->napi);I am not sure very sure of this, have you tested this for the reset/rebuild path as well (example: ethtool -L and change queues). Just wondering if this path is taken for first time VSI init or additionally for any VSI rebuilds as well.
Can you explain more about what your concern is? I'm not sure I follow. Was the concern just that on rebuild this code path might not be executed because the driver might take a different path?
If so, I traced the code (and tested with ethtool):
When the device is probed:
i40e_probe
i40e_vsi_open
i40e_vsi_configure
i40e_vsi_configure_rx
i40e_configure_rx_ring
i40e_vsi_configure_tx
i40e_configure_tx_ringWhen you use ethtool to change the channel count:
i40e_set_channels
i40e_reconfig_rss_queues
i40e_reset_and_rebuild
i40e_rebuild
i40e_pf_unquiesce_all_vsi
i40e_unquiesce_vsi
i40e_vsi_open
[.. the call stack above fori40e_vsi_open..]
Quoted 6 lines
Quoted 4 lines
Are those the two paths you had in mind or were there other ones? FWIW, using ethtool to change the channel count followed by using the
cli.pyreturns what appears to be correct data, so I think the ethtool -L case is covered.Yes, this is what I had mind. Good to know that it is covered.
Thanks for the thorough review; I appreciate your insight. The more I look at the i40e code paths, the more I realize that it is much trickier than I originally thought.
Quoted 9 lines
Quoted 3 lines
Let me know if I am missing any cases you had in mind or if this answers your question.
One other case was the suspend/resume callback. This path involves remapping vectors and rings (just like rebuild after changing channels), If this takes the
i40e_rebuildpath like before, then we are covered, as your changes are ini40e_vsi_configure. If not, we'll have to add it after re-initializing interrupt scheme .
Here's what I see in this path, namely that i40e_suspend does not call i40e_queue_set_napi but sets appropriate bits that can be checked.
i40e_suspend:
__I40E_DOWN is set
__I40E_SUSPENDED is set
rtnl_lock
i40e_clear_interrupt_scheme
i40e_vsi_free_q_vectors
i40e_free_q_vector rtnl_unlock
It seems in the suspend case the i40e_free_rx_resources and i40e_free_tx_resources are not called. This means I probably missed a case and need to call i40e_queue_set_napi to set the NAPI mapping to NULL somewhere in here without calling it twice. See further below for my thoughts on this.
Continuing with resume, though:
i40e_resume:
rtnl_lock
i40e_restore_interrupt_scheme
i40e_vsi_alloc_q_vectors
i40e_vsi_alloc_q_vector
__I40E_DOWN is cleared i40e_reset_and_rebuild (passes lock_acquired = true)
i40e_rebuild (passes locked_acquired = true)
rtnl_unlock
__I40E_SUSPENDED is cleared
So, in this case i40e_resume would want to to call __i40e_queue_set_napi with locked = true, to avoid rtnl since it's already been taken. I think to cover this case __I40E_SUSPENDED needs to be checked but true can be passed to the helper to avoid taking rtnl in the helper.
This is an adjusted if statement, which is likely still incorrect in some cases (especially when considering my comments below on the i40e_free_[rt]x_resource paths), but maybe getting slightly closer:
/* __I40E_PF_RESET_REQUESTED via the service_task will
* call i40e_rebuild with lock_acquired = false, causing rtnl to be
* taken, meaning __i40e_queue_set_napi should *NOT* take the lock. *
* __I40E_PF_RESET_REQUESTED when set directly and not via the
* service task, i40e_reset is called with lock_acquired = true,
* implying that the rtnl was already taken (and, more
* specifically, the lock was not simply unnecessary and skipped)
* and so __i40e_queue_set_napi should *NOT* take the lock.
*
* __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED
* trigger the service_task (via i40e_intr) which will cause
* i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should
* not acquire it.
*
* __I40E_SUSPENDED is set in i40e_suspend and cleared in i40e_resume
* after rtnl_lock + i40_rebuild (with lock_acquired = true). In
* i40e_resume's call to i40e_rebuild, rtnl is held so
* __i40e_queue_set_napi should not take the lock, either.
*
* __I40E_IN_REMOVE is set in i40e_remove, and freeing the tx/rx
* resources will trigger this path. In this case, rtnl will not be held,
* so locked=false must be passed to the helper.
*
* __I40E_DOWN is set in a few places: i40e_probe, i40e_remove,
* i40e_shutdown, i40e_suspend. It is only cleared in i40e_probe after
* the vsi_open path is taken (in this case rtnl is needed) and it is
* cleared in i40e_resume, where RTNL is not needed, but the i40e_resume
* case is handled by checking __I40E_SUSPENDED in the first if block. */
if (current_work() == &pf->service_task ||
test_bit(__I40E_PF_RESET_REQUESTED, pf->state) ||
test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) ||
test_bit(__I40E_CORE_RESET_REQUESTED, pf->state) |
test_bit(__I40E_SUSPENDED, pf->state))
__i40e_queue_set_napi(vsi->netdev, queue_index, type, napi,
true);
else if (test_bit(__I40E_IN_REMOVE, pf->state) ||
test_bit(__I40E_DOWN, pf->state))
__i40e_queue_set_napi(vsi->netdev, queue_index, type, napi,
false);
else
__i40e_queue_set_napi(vsi->netdev, queue_index, type, napi,
true);But please see below about i40e_free_q_vector.
Quoted 31 lines
Quoted 31 lines
Quoted 31 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_rx_ring(struct i40e_ring *ring) · line 3774
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0return 0 ; }@@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) ring->queue_index, pf_q); } +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_RX , + &ring->q_vector->napi);Same as above.
return 0;Quoted 20 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0}@@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) q_vector->affinity_notify.notify = i40e_irq_affinity_notify; q_vector->affinity_notify.release = i40e_irq_affinity_release;irq_set_affinity_notifier (irq_num, &q_vector->affinity_notify); +netif_napi_set_irq (&q_vector->napi, q_vector->irq_num); +/* Spread affinity hints out across online CPUs. * * get_cpu_mask returns a static constant mask with drivers/net/ethernet/intel/i40e/i40e_txrx.c +2
-0@@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring)void i40e_free_tx_resources (struct i40e_ring *tx_ring) {i40e_clean_tx_ring (tx_ring); +i40e_queue_set_napi (tx_ring->vsi, tx_ring->queue_index, +NETDEV_QUEUE_TYPE_TX ,NULL );
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_txrx.c void i40e_clean_rx_ring(struct i40e_ring *rx_ring) · line 1532
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_txrx.c +2
-0kfree (tx_ring->tx_bi); tx_ring->tx_bi =NULL ;@@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring)void i40e_free_rx_resources (struct i40e_ring *rx_ring) {i40e_clean_rx_ring (rx_ring); +i40e_queue_set_napi (rx_ring->vsi, rx_ring->queue_index, +NETDEV_QUEUE_TYPE_RX ,NULL );
It appears to me that some cases may not end up calling i40e_free_tx_resources or i40e_free_rx_resources, but most (or all?) cases do call i40e_free_q_vector which is where the NAPI is deleted.
It probably makes more sense to put the NULL setting where the NAPI delete happens, and then check those paths to see where rtnl is taken and make sure the bit checking in the if statement lines up properly.
Before I go any deeper down this rabbit hole, I'll wait to see what the i40e maintainers say / think about this.
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
drivers/net/ethernet/intel/i40e/i40e_txrx.c +0
-0if (rx_ring->vsi->type ==I40E_VSI_MAIN )xdp_rxq_info_unreg (&rx_ring->xdp_rxq); rx_ring->xdp_prog =NULL ;
Tony Nguyen
maintainerRe: [intel-next 1/2] net/i40e: link NAPI instances to queues and IRQs
Quoted 415 lines · Joe Damato
Quoted 209 lines · Amritha
Quoted 208 lines · Joe Damato
Quoted 92 lines · Amritha
Quoted 91 lines · Joe Damato
Make i40e compatible with the newly added netlink queue GET APIs.
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}'{'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'}
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do napi-get --json '{"id": 162}'{'id': 162, 'ifindex': 3, 'irq': 136}
The above output suggests that irq 136 was allocated for queue 1, which has a NAPI ID of 162.
To double check this is correct, the IRQ to queue mapping can be verified by checking
/proc/interrupts:$ cat /proc/interrupts | grep 136\: | \ awk '{print "irq: " $1 " name " $76}'irq: 136: name i40e-vlan300-TxRx-1
Suggests that queue 1 has IRQ 136, as expected.
Signed-off-by Joe Damato <[email protected]>--- drivers/net/ethernet/intel/i40e/i40e.h | 2 + drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ 3 files changed, 64 insertions(+)drivers/net/ethernet/intel/i40e/i40e.h +2
-0@@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);int i40e_open (struct net_device *netdev);int i40e_close (struct net_device *netdev);int i40e_vsi_open (struct i40e_vsi *vsi); +void i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi);void i40e_vlan_stripping_disable (struct i40e_vsi *vsi);int i40e_add_vlan_all_mac (struct i40e_vsi *vsi,s16 vid);int i40e_vsi_add_vlan (struct i40e_vsi *vsi,u16 vid);drivers/net/ethernet/intel/i40e/i40e_main.c +39
-0@@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring)return xsk_get_pool_from_qid (ring->vsi->netdev, qid); } +/** +* __i40e_queue_set_napi - Set the napi instance for the queue +* @dev: device to which NAPI and queue belong +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* @locked: is the rtnl_lock already held +* +* Set the napi instance for the queue. Caller indicates the lock status. +*/ +static void +__i40e_queue_set_napi (struct net_device *dev,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi, +bool locked) +{ +if (!locked) +rtnl_lock (); +netif_queue_set_napi (dev, queue_index, type, napi); +if (!locked) +rtnl_unlock (); +} + +/** +* i40e_queue_set_napi - Set the napi instance for the queue +* @vsi: VSI being configured +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* +* Set the napi instance for the queue. The rtnl lock state is derived from the +* execution path. +*/ +void +i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi) +{ +struct i40e_pf *pf = vsi->back; + +if (!vsi->netdev)Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3493
Quoted 4 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +4
-0+return ; + + if (current_work() == &pf->service_task || + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) ||I think we might need something like
ICE_PREPARED_FOR_RESETwhich detects all kinds of resets(PFR/CORE/GLOBR).__I40E_PF_RESET_REQUESTEDhandles PFR only. So, this might assert for RTNL lock on CORER/GLOBR.The i40e code is a bit tricky so I'm not sure about these cases. Here's what it looks like to me, but hopefully Intel can weigh-in here as well.
As some one who is not an expert in i40e, what follows is a guess that is likely wrong ;)
The
__I40E_GLOBAL_RESET_REQUESTEDcase it looks to me (I could totally be wrong here) that thei40e_reset_subtaskcallsi40e_rebuildwithlock_acquired= false. In this case, we want__i40e_queue_set_napito pass locked = true (becausei40e_rebuildwill acquire the lock for us).The
__I40E_CORE_RESET_REQUESTEDcase appears to be the same as the__I40E_GLOBAL_RESET_REQUESTEDcase in thati40e_rebuildis called withlock_acquired= false meaning we also want__i40e_queue_set_napito pass locked = true (becausei40e_rebuildwill acquire the lock for us).
__I40E_PF_RESET_REQUESTEDis more complex.It seems:
When the__I40E_PF_RESET_REQUESTEDbit is set in:
-i40e_handle_lldp_event
-i40e_tx_timeout
-i40e_intr
-i40e_resume_port_tx
-i40e_suspend_port_tx
-i40e_hw_dcb_configthen:
i40e_service_event_scheduleis called which queuesi40e_service_task, which callsi40e_reset_subtask, which clears the__I40E_PF_RESET_REQUESTEDbit and callsi40e_do_resetpassinglock_acquired= false. In the__I40E_PF_RESET_REQUESTEDcase,i40e_reset_and_rebuild
called withlock_acquired= false again and passed through toi40e_rebuildwhich will take rtnl on its own. This means
in these cases,__i40e_queue_set_napican pass locked = true.However...
-
i40e_set_features
-i40e_ndo_bridge_setlink
-i40e_create_queue_channel
-i40e_configure_queue_channels
- Error case ini40e_vsi_opencall
i40e_do_resetdirectly and passlock_acquired= true soi40e_reset_and_rebuildwill not take the RTNL.Important assumption: I assume that passing
lock_acquired= true means that the lock really was previously acquired (and not simply unnecessary and not taken ?).If that is correct, then
__i40e_queue_set_napishould also not take the rtnl (e.g.
locked = true).Again, I could be totally off here, but it looks like when:
(current_work() == &pf->service_task) && test_bit(__I40E_PF_RESET_REQUESTED, pf->state)is true, we want to call
__i40e_queue_set_napiwith locked = true,and also all the other cases we want
__i40e_queue_set_napiwith locked = trueQuoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3500
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +7
-0+ test_bit(__I40E_DOWN, pf->state) || + test_bit(__I40E_SUSPENDED, pf->state)) +__i40e_queue_set_napi (vsi->netdev, queue_index, type, napi, + false); + else + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, +true );I *think* (but honestly... I have no idea) the correct if statement *might* be something like:
/* __I40E_PF_RESET_REQUESTED via the service_task will * call i40e_rebuild with lock_acquired = false, causing rtnl to be * taken, meaning __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_PF_RESET_REQUESTED when set directly and not via the * service task, i40e_reset is called with lock_acquired = true, * implying that the rtnl was already taken (and, more * specifically, the lock was not simply unnecessary and skipped) * and so __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED * trigger the service_task (via i40e_intr) which will cause * i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should * not acquire it. */ if (current_work() == &pf->service_task || test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || test_bit(__I40E_CORE_RESET_REQUESTED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true); else if (test_bit(__I40E_DOWN, pf->state) || test_bit(__I40E_SUSPENDED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, false); else __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true);I suppose to figure this out, I'd need to investigate all cases where
i40e_rebuildis called withlock_acquired= true to ensure that the lock was actually acquired (and not just unnecessary).Quoted 5 lines
Quoted 3 lines
Unless some one who knows about i40e can answer this question more definitively.
I'll wait for the i40e maintainers to chime in here.
Based on the findings of
I40E_SUSPENDEDbelow, the above if statement is still slightly incorrect, please see below.Quoted 43 lines
Quoted 43 lines
Quoted 7 lines
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0+} +/** * i40e_configure_tx_ring - Configure a transmit ring context and rest * @ring: The Tx ring to configure @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)/* cache tail off for easier writes later */ Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_tx_ring(struct i40e_ring *ring) · line 3614
Quoted 3 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0ring->tail = hw->hw_addr +I40E_QTX_TAIL (pf_q); +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_TX , + &ring->q_vector->napi);I am not sure very sure of this, have you tested this for the reset/rebuild path as well (example: ethtool -L and change queues). Just wondering if this path is taken for first time VSI init or additionally for any VSI rebuilds as well.
Can you explain more about what your concern is? I'm not sure I follow. Was the concern just that on rebuild this code path might not be executed because the driver might take a different path?
If so, I traced the code (and tested with ethtool):
When the device is probed:
i40e_probei40e_vsi_open i40e_vsi_configure i40e_vsi_configure_rx i40e_configure_rx_ring i40e_vsi_configure_tx i40e_configure_tx_ringWhen you use ethtool to change the channel count:
i40e_set_channels
i40e_reconfig_rss_queues
i40e_reset_and_rebuild
i40e_rebuild
i40e_pf_unquiesce_all_vsi
i40e_unquiesce_vsi
i40e_vsi_open
[.. the call stack above fori40e_vsi_open..]Quoted 6 lines
Quoted 4 lines
Are those the two paths you had in mind or were there other ones? FWIW, using ethtool to change the channel count followed by using the
cli.pyreturns what appears to be correct data, so I think the ethtool -L case is covered.Yes, this is what I had mind. Good to know that it is covered.
Thanks for the thorough review; I appreciate your insight. The more I look at the i40e code paths, the more I realize that it is much trickier than I originally thought.
Quoted 9 lines
Quoted 3 lines
Let me know if I am missing any cases you had in mind or if this answers your question.
One other case was the suspend/resume callback. This path involves remapping vectors and rings (just like rebuild after changing channels), If this takes the
i40e_rebuildpath like before, then we are covered, as your changes are ini40e_vsi_configure. If not, we'll have to add it after re-initializing interrupt scheme .Here's what I see in this path, namely that
i40e_suspenddoes not calli40e_queue_set_napibut sets appropriate bits that can be checked.
i40e_suspend:__I40E_DOWN is set __I40E_SUSPENDED is set rtnl_lock i40e_clear_interrupt_scheme i40e_vsi_free_q_vectors i40e_free_q_vector rtnl_unlockIt seems in the suspend case the
i40e_free_rx_resourcesandi40e_free_tx_resourcesare not called. This means I probably missed a case and need to calli40e_queue_set_napito set the NAPI mapping to NULL somewhere in here without calling it twice. See further below for my thoughts on this.Continuing with resume, though:
i40e_resume:
rtnl_lock
i40e_restore_interrupt_scheme
i40e_vsi_alloc_q_vectors
i40e_vsi_alloc_q_vector
__I40E_DOWNis clearedi40e_reset_and_rebuild(passeslock_acquired= true)
i40e_rebuild(passeslocked_acquired= true)
rtnl_unlock
__I40E_SUSPENDEDis clearedSo, in this case
i40e_resumewould want to to call__i40e_queue_set_napiwith locked = true, to avoid rtnl since it's already been taken. I think to cover this case__I40E_SUSPENDEDneeds to be checked but true can be passed to the helper to avoid taking rtnl in the helper.This is an adjusted if statement, which is likely still incorrect in some cases (especially when considering my comments below on the i40e_free_[rt]x_resource paths), but maybe getting slightly closer:
/*
__I40E_PF_RESET_REQUESTEDvia theservice_taskwill
* calli40e_rebuildwithlock_acquired= false, causing rtnl to be
* taken, meaning__i40e_queue_set_napishould *NOT* take the lock. *
*__I40E_PF_RESET_REQUESTEDwhen set directly and not via the
* service task,i40e_resetis called withlock_acquired= true,
* implying that the rtnl was already taken (and, more
* specifically, the lock was not simply unnecessary and skipped)
* and so__i40e_queue_set_napishould *NOT* take the lock.
*
*__I40E_GLOBAL_RESET_REQUESTEDand__I40E_CORE_RESET_REQUESTED
* trigger theservice_task(viai40e_intr) which will cause
*i40e_rebuildto acquire rtnl and so__i40e_queue_set_napishould
* not acquire it.
*
*__I40E_SUSPENDEDis set ini40e_suspendand cleared ini40e_resume
* afterrtnl_lock+i40_rebuild(withlock_acquired= true). In
* i40e_resume's call toi40e_rebuild, rtnl is held so
*__i40e_queue_set_napishould not take the lock, either.
*
*__I40E_IN_REMOVEis set ini40e_remove, and freeing the tx/rx
* resources will trigger this path. In this case, rtnl will not be held,
* so locked=false must be passed to the helper.
*
*__I40E_DOWNis set in a few places:i40e_probe,i40e_remove,
*i40e_shutdown,i40e_suspend. It is only cleared ini40e_probeafter
* thevsi_openpath is taken (in this case rtnl is needed) and it is
* cleared ini40e_resume, where RTNL is not needed, but thei40e_resume
* case is handled by checking__I40E_SUSPENDEDin the first if block. */
if (current_work()==&pf->service_task||test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || test_bit(__I40E_CORE_RESET_REQUESTED, pf->state) | test_bit(__I40E_SUSPENDED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true); else if (test_bit(__I40E_IN_REMOVE, pf->state) || test_bit(__I40E_DOWN, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, false); else __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true);But please see below about
i40e_free_q_vector.Quoted 31 lines
Quoted 31 lines
Quoted 31 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_rx_ring(struct i40e_ring *ring) · line 3774
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0return 0 ; }@@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) ring->queue_index, pf_q); } +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_RX , + &ring->q_vector->napi);Same as above.
return 0;Quoted 20 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0}@@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) q_vector->affinity_notify.notify = i40e_irq_affinity_notify; q_vector->affinity_notify.release = i40e_irq_affinity_release;irq_set_affinity_notifier (irq_num, &q_vector->affinity_notify); +netif_napi_set_irq (&q_vector->napi, q_vector->irq_num); +/* Spread affinity hints out across online CPUs. * * get_cpu_mask returns a static constant mask with drivers/net/ethernet/intel/i40e/i40e_txrx.c +2
-0@@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring)void i40e_free_tx_resources (struct i40e_ring *tx_ring) {i40e_clean_tx_ring (tx_ring); +i40e_queue_set_napi (tx_ring->vsi, tx_ring->queue_index, +NETDEV_QUEUE_TYPE_TX ,NULL );Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_txrx.c void i40e_clean_rx_ring(struct i40e_ring *rx_ring) · line 1532
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_txrx.c +2
-0kfree (tx_ring->tx_bi); tx_ring->tx_bi =NULL ;@@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring)void i40e_free_rx_resources (struct i40e_ring *rx_ring) {i40e_clean_rx_ring (rx_ring); +i40e_queue_set_napi (rx_ring->vsi, rx_ring->queue_index, +NETDEV_QUEUE_TYPE_RX ,NULL );It appears to me that some cases may not end up calling
i40e_free_tx_resourcesori40e_free_rx_resources, but most (or all?) cases do calli40e_free_q_vectorwhich is where the NAPI is deleted.
Quoted 6 lines
It probably makes more sense to put the NULL setting where the NAPI delete happens, and then check those paths to see where rtnl is taken and make sure the bit checking in the if statement lines up properly.
Before I go any deeper down this rabbit hole, I'll wait to see what the i40e maintainers say / think about this.
+ Alex for input
Thanks,
Tony
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
drivers/net/ethernet/intel/i40e/i40e_txrx.c +0
-0if (rx_ring->vsi->type ==I40E_VSI_MAIN )xdp_rxq_info_unreg (&rx_ring->xdp_rxq); rx_ring->xdp_prog =NULL ;
Re: [intel-next 1/2] net/i40e: link NAPI instances to queues and IRQs
Quoted 418 lines · Tony Nguyen
Quoted 415 lines · Joe Damato
Quoted 209 lines · Amritha
Quoted 208 lines · Joe Damato
Quoted 92 lines · Amritha
Quoted 91 lines · Joe Damato
Make i40e compatible with the newly added netlink queue GET APIs.
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}'{'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'}
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do napi-get --json '{"id": 162}'{'id': 162, 'ifindex': 3, 'irq': 136}
The above output suggests that irq 136 was allocated for queue 1, which has a NAPI ID of 162.
To double check this is correct, the IRQ to queue mapping can be verified by checking
/proc/interrupts:$ cat /proc/interrupts | grep 136\: | \ awk '{print "irq: " $1 " name " $76}'irq: 136: name i40e-vlan300-TxRx-1
Suggests that queue 1 has IRQ 136, as expected.
Signed-off-by Joe Damato <[email protected]>--- drivers/net/ethernet/intel/i40e/i40e.h | 2 + drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ 3 files changed, 64 insertions(+)drivers/net/ethernet/intel/i40e/i40e.h +2
-0@@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);int i40e_open (struct net_device *netdev);int i40e_close (struct net_device *netdev);int i40e_vsi_open (struct i40e_vsi *vsi); +void i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi);void i40e_vlan_stripping_disable (struct i40e_vsi *vsi);int i40e_add_vlan_all_mac (struct i40e_vsi *vsi,s16 vid);int i40e_vsi_add_vlan (struct i40e_vsi *vsi,u16 vid);drivers/net/ethernet/intel/i40e/i40e_main.c +39
-0@@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring)return xsk_get_pool_from_qid (ring->vsi->netdev, qid); } +/** +* __i40e_queue_set_napi - Set the napi instance for the queue +* @dev: device to which NAPI and queue belong +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* @locked: is the rtnl_lock already held +* +* Set the napi instance for the queue. Caller indicates the lock status. +*/ +static void +__i40e_queue_set_napi (struct net_device *dev,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi, +bool locked) +{ +if (!locked) +rtnl_lock (); +netif_queue_set_napi (dev, queue_index, type, napi); +if (!locked) +rtnl_unlock (); +} + +/** +* i40e_queue_set_napi - Set the napi instance for the queue +* @vsi: VSI being configured +* @queue_index: Index of queue +* @type: queue type as RX or TX +* @napi: NAPI context +* +* Set the napi instance for the queue. The rtnl lock state is derived from the +* execution path. +*/ +void +i40e_queue_set_napi (struct i40e_vsi *vsi,unsigned int queue_index, +enum netdev_queue_type type,struct napi_struct *napi) +{ +struct i40e_pf *pf = vsi->back; + +if (!vsi->netdev)Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3493
Quoted 4 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +4
-0+return ; + + if (current_work() == &pf->service_task || + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) ||I think we might need something like
ICE_PREPARED_FOR_RESETwhich detects all kinds of resets(PFR/CORE/GLOBR).__I40E_PF_RESET_REQUESTEDhandles PFR only. So, this might assert for RTNL lock on CORER/GLOBR.The i40e code is a bit tricky so I'm not sure about these cases. Here's what it looks like to me, but hopefully Intel can weigh-in here as well.
As some one who is not an expert in i40e, what follows is a guess that is likely wrong ;)
The
__I40E_GLOBAL_RESET_REQUESTEDcase it looks to me (I could totally be wrong here) that thei40e_reset_subtaskcallsi40e_rebuildwithlock_acquired= false. In this case, we want__i40e_queue_set_napito pass locked = true (becausei40e_rebuildwill acquire the lock for us).The
__I40E_CORE_RESET_REQUESTEDcase appears to be the same as the__I40E_GLOBAL_RESET_REQUESTEDcase in thati40e_rebuildis called withlock_acquired= false meaning we also want__i40e_queue_set_napito pass locked = true (becausei40e_rebuildwill acquire the lock for us).
__I40E_PF_RESET_REQUESTEDis more complex.It seems:
When the__I40E_PF_RESET_REQUESTEDbit is set in:
-i40e_handle_lldp_event
-i40e_tx_timeout
-i40e_intr
-i40e_resume_port_tx
-i40e_suspend_port_tx
-i40e_hw_dcb_configthen:
i40e_service_event_scheduleis called which queuesi40e_service_task, which callsi40e_reset_subtask, which clears the__I40E_PF_RESET_REQUESTEDbit and callsi40e_do_resetpassinglock_acquired= false. In the__I40E_PF_RESET_REQUESTEDcase,i40e_reset_and_rebuild
called withlock_acquired= false again and passed through toi40e_rebuildwhich will take rtnl on its own. This means
in these cases,__i40e_queue_set_napican pass locked = true.However...
-
i40e_set_features
-i40e_ndo_bridge_setlink
-i40e_create_queue_channel
-i40e_configure_queue_channels
- Error case ini40e_vsi_opencall
i40e_do_resetdirectly and passlock_acquired= true soi40e_reset_and_rebuildwill not take the RTNL.Important assumption: I assume that passing
lock_acquired= true means that the lock really was previously acquired (and not simply unnecessary and not taken ?).If that is correct, then
__i40e_queue_set_napishould also not take the rtnl (e.g.
locked = true).Again, I could be totally off here, but it looks like when:
(current_work() == &pf->service_task) && test_bit(__I40E_PF_RESET_REQUESTED, pf->state)is true, we want to call
__i40e_queue_set_napiwith locked = true,and also all the other cases we want
__i40e_queue_set_napiwith locked = trueQuoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) · line 3500
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +7
-0+ test_bit(__I40E_DOWN, pf->state) || + test_bit(__I40E_SUSPENDED, pf->state)) +__i40e_queue_set_napi (vsi->netdev, queue_index, type, napi, + false); + else + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, +true );I *think* (but honestly... I have no idea) the correct if statement *might* be something like:
/* __I40E_PF_RESET_REQUESTED via the service_task will * call i40e_rebuild with lock_acquired = false, causing rtnl to be * taken, meaning __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_PF_RESET_REQUESTED when set directly and not via the * service task, i40e_reset is called with lock_acquired = true, * implying that the rtnl was already taken (and, more * specifically, the lock was not simply unnecessary and skipped) * and so __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED * trigger the service_task (via i40e_intr) which will cause * i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should * not acquire it. */ if (current_work() == &pf->service_task || test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || test_bit(__I40E_CORE_RESET_REQUESTED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true); else if (test_bit(__I40E_DOWN, pf->state) || test_bit(__I40E_SUSPENDED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, false); else __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true);I suppose to figure this out, I'd need to investigate all cases where
i40e_rebuildis called withlock_acquired= true to ensure that the lock was actually acquired (and not just unnecessary).Quoted 5 lines
Quoted 3 lines
Unless some one who knows about i40e can answer this question more definitively.
I'll wait for the i40e maintainers to chime in here.
Based on the findings of
I40E_SUSPENDEDbelow, the above if statement is still slightly incorrect, please see below.Quoted 43 lines
Quoted 43 lines
Quoted 7 lines
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0+} +/** * i40e_configure_tx_ring - Configure a transmit ring context and rest * @ring: The Tx ring to configure @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)/* cache tail off for easier writes later */ Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_tx_ring(struct i40e_ring *ring) · line 3614
Quoted 3 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0ring->tail = hw->hw_addr +I40E_QTX_TAIL (pf_q); +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_TX , + &ring->q_vector->napi);I am not sure very sure of this, have you tested this for the reset/rebuild path as well (example: ethtool -L and change queues). Just wondering if this path is taken for first time VSI init or additionally for any VSI rebuilds as well.
Can you explain more about what your concern is? I'm not sure I follow. Was the concern just that on rebuild this code path might not be executed because the driver might take a different path?
If so, I traced the code (and tested with ethtool):
When the device is probed:
i40e_probei40e_vsi_open i40e_vsi_configure i40e_vsi_configure_rx i40e_configure_rx_ring i40e_vsi_configure_tx i40e_configure_tx_ringWhen you use ethtool to change the channel count:
i40e_set_channels
i40e_reconfig_rss_queues
i40e_reset_and_rebuild
i40e_rebuild
i40e_pf_unquiesce_all_vsi
i40e_unquiesce_vsi
i40e_vsi_open
[.. the call stack above fori40e_vsi_open..]Quoted 6 lines
Quoted 4 lines
Are those the two paths you had in mind or were there other ones? FWIW, using ethtool to change the channel count followed by using the
cli.pyreturns what appears to be correct data, so I think the ethtool -L case is covered.Yes, this is what I had mind. Good to know that it is covered.
Thanks for the thorough review; I appreciate your insight. The more I look at the i40e code paths, the more I realize that it is much trickier than I originally thought.
Quoted 9 lines
Quoted 3 lines
Let me know if I am missing any cases you had in mind or if this answers your question.
One other case was the suspend/resume callback. This path involves remapping vectors and rings (just like rebuild after changing channels), If this takes the
i40e_rebuildpath like before, then we are covered, as your changes are ini40e_vsi_configure. If not, we'll have to add it after re-initializing interrupt scheme .Here's what I see in this path, namely that
i40e_suspenddoes not calli40e_queue_set_napibut sets appropriate bits that can be checked.
i40e_suspend:__I40E_DOWN is set __I40E_SUSPENDED is set rtnl_lock i40e_clear_interrupt_scheme i40e_vsi_free_q_vectors i40e_free_q_vector rtnl_unlockIt seems in the suspend case the
i40e_free_rx_resourcesandi40e_free_tx_resourcesare not called. This means I probably missed a case and need to calli40e_queue_set_napito set the NAPI mapping to NULL somewhere in here without calling it twice. See further below for my thoughts on this.Continuing with resume, though:
i40e_resume:
rtnl_lock
i40e_restore_interrupt_scheme
i40e_vsi_alloc_q_vectors
i40e_vsi_alloc_q_vector
__I40E_DOWNis clearedi40e_reset_and_rebuild(passeslock_acquired= true)
i40e_rebuild(passeslocked_acquired= true)
rtnl_unlock
__I40E_SUSPENDEDis clearedSo, in this case
i40e_resumewould want to to call__i40e_queue_set_napiwith locked = true, to avoid rtnl since it's already been taken. I think to cover this case__I40E_SUSPENDEDneeds to be checked but true can be passed to the helper to avoid taking rtnl in the helper.This is an adjusted if statement, which is likely still incorrect in some cases (especially when considering my comments below on the i40e_free_[rt]x_resource paths), but maybe getting slightly closer:
/*
__I40E_PF_RESET_REQUESTEDvia theservice_taskwill
* calli40e_rebuildwithlock_acquired= false, causing rtnl to be
* taken, meaning__i40e_queue_set_napishould *NOT* take the lock. *
*__I40E_PF_RESET_REQUESTEDwhen set directly and not via the
* service task,i40e_resetis called withlock_acquired= true,
* implying that the rtnl was already taken (and, more
* specifically, the lock was not simply unnecessary and skipped)
* and so__i40e_queue_set_napishould *NOT* take the lock.
*
*__I40E_GLOBAL_RESET_REQUESTEDand__I40E_CORE_RESET_REQUESTED
* trigger theservice_task(viai40e_intr) which will cause
*i40e_rebuildto acquire rtnl and so__i40e_queue_set_napishould
* not acquire it.
*
*__I40E_SUSPENDEDis set ini40e_suspendand cleared ini40e_resume
* afterrtnl_lock+i40_rebuild(withlock_acquired= true). In
* i40e_resume's call toi40e_rebuild, rtnl is held so
*__i40e_queue_set_napishould not take the lock, either.
*
*__I40E_IN_REMOVEis set ini40e_remove, and freeing the tx/rx
* resources will trigger this path. In this case, rtnl will not be held,
* so locked=false must be passed to the helper.
*
*__I40E_DOWNis set in a few places:i40e_probe,i40e_remove,
*i40e_shutdown,i40e_suspend. It is only cleared ini40e_probeafter
* thevsi_openpath is taken (in this case rtnl is needed) and it is
* cleared ini40e_resume, where RTNL is not needed, but thei40e_resume
* case is handled by checking__I40E_SUSPENDEDin the first if block. */
if (current_work()==&pf->service_task||test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || test_bit(__I40E_CORE_RESET_REQUESTED, pf->state) | test_bit(__I40E_SUSPENDED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true); else if (test_bit(__I40E_IN_REMOVE, pf->state) || test_bit(__I40E_DOWN, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, false); else __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true);But please see below about
i40e_free_q_vector.Quoted 31 lines
Quoted 31 lines
Quoted 31 lines
drivers/net/ethernet/intel/i40e/i40e_main.c static int i40e_configure_rx_ring(struct i40e_ring *ring) · line 3774
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0return 0 ; }@@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) ring->queue_index, pf_q); } +i40e_queue_set_napi (vsi, ring->queue_index,NETDEV_QUEUE_TYPE_RX , + &ring->q_vector->napi);Same as above.
return 0;Quoted 20 lines
drivers/net/ethernet/intel/i40e/i40e_main.c +2
-0}@@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) q_vector->affinity_notify.notify = i40e_irq_affinity_notify; q_vector->affinity_notify.release = i40e_irq_affinity_release;irq_set_affinity_notifier (irq_num, &q_vector->affinity_notify); +netif_napi_set_irq (&q_vector->napi, q_vector->irq_num); +/* Spread affinity hints out across online CPUs. * * get_cpu_mask returns a static constant mask with drivers/net/ethernet/intel/i40e/i40e_txrx.c +2
-0@@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring)void i40e_free_tx_resources (struct i40e_ring *tx_ring) {i40e_clean_tx_ring (tx_ring); +i40e_queue_set_napi (tx_ring->vsi, tx_ring->queue_index, +NETDEV_QUEUE_TYPE_TX ,NULL );Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_txrx.c void i40e_clean_rx_ring(struct i40e_ring *rx_ring) · line 1532
Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_txrx.c +2
-0kfree (tx_ring->tx_bi); tx_ring->tx_bi =NULL ;@@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring)void i40e_free_rx_resources (struct i40e_ring *rx_ring) {i40e_clean_rx_ring (rx_ring); +i40e_queue_set_napi (rx_ring->vsi, rx_ring->queue_index, +NETDEV_QUEUE_TYPE_RX ,NULL );It appears to me that some cases may not end up calling
i40e_free_tx_resourcesori40e_free_rx_resources, but most (or all?) cases do calli40e_free_q_vectorwhich is where the NAPI is deleted.
Quoted 8 lines
Quoted 6 lines
It probably makes more sense to put the NULL setting where the NAPI delete happens, and then check those paths to see where rtnl is taken and make sure the bit checking in the if statement lines up properly.
Before I go any deeper down this rabbit hole, I'll wait to see what the i40e maintainers say / think about this.
+ Alex for input
Just wanted to follow up on this; would really appreciate any insight or advice you all can give me before I try posting another version.
We'd really love to have support for these APIs in i40e, because we have a lot of machines with this NIC in our fleet.
Thanks,
Joe
PATCH 2/2 net/i40e: add support for per queue netlink stats
In reply to Joe DamatoMake i40e compatible with the newly added netlink per queue stats.
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"scope": "queue"}'[{'ifindex': 3,
'queue-id': 0,
'queue-type': 'rx',
'rx-alloc-fail': 0,
'rx-bytes': 45540208,
'rx-packets': 57112},
{'ifindex': 3,
'queue-id': 1,
'queue-type': 'rx',
'rx-alloc-fail': 0,
'rx-bytes': 8717844,
'rx-packets': 31256},
...
Comparing to ethtool to verify:
$ ethtool -S eth3 | egrep 'rx-[01]\.'
rx-0.packets: 57112
rx-0.bytes: 45540208
rx-1.packets: 31256
rx-1.bytes: 8717844--- drivers/net/ethernet/intel/i40e/i40e_main.c | 102 ++++++++++++++++++++ 1 file changed, 102 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_main.c +102 -0
@@ -6,6 +6,7 @@#include <linux/if_bridge.h> #include <linux/if_macvlan.h> #include <linux/module.h> +#include <net/netdev_queues.h> #include <net/pkt_cls.h> #include <net/xdp_sock_drv.h>
@@ -515,6 +516,100 @@ static void i40e_get_netdev_stats_struct(struct net_device *netdev, stats->rx_length_errors = vsi_stats->rx_length_errors; } +static void i40e_get_queue_stats_rx (struct net_device *dev,int i, +struct netdev_queue_stats_rx *stats) +{ +struct i40e_netdev_priv *np =netdev_priv (dev); +struct i40e_vsi *vsi = np->vsi; +struct i40e_ring *ring; +unsigned int start; + + stats->bytes =0xff ; + stats->packets =0xff ; + stats->alloc_fail =0xff ; + +if (test_bit (__I40E_VSI_DOWN, vsi->state)) +return ; + +if (!vsi->rx_rings) +return ; + +rcu_read_lock (); + ring =READ_ONCE (vsi->rx_rings[i]); +if (ring) { +do { + start =u64_stats_fetch_begin (&ring->syncp); + stats->packets = ring->stats.packets; + stats->bytes = ring->stats.bytes; + stats->alloc_fail = ring->rx_stats.alloc_page_failed; + }while (u64_stats_fetch_retry (&ring->syncp, start)); + } +rcu_read_unlock (); +} + +static void i40e_get_queue_stats_tx (struct net_device *dev,int i, +struct netdev_queue_stats_tx *stats) +{ +struct i40e_netdev_priv *np =netdev_priv (dev); +struct i40e_vsi *vsi = np->vsi; +struct i40e_ring *ring; +unsigned int start; + + stats->bytes =0xff ; + stats->packets =0xff ; + +if (test_bit (__I40E_VSI_DOWN, vsi->state)) +return ; + +if (!vsi->tx_rings) +return ; + +rcu_read_lock (); + ring =READ_ONCE (vsi->tx_rings[i]); +if (ring) { +do { + start =u64_stats_fetch_begin (&ring->syncp); + stats->packets = ring->stats.packets; + stats->bytes = ring->stats.bytes; + }while (u64_stats_fetch_retry (&ring->syncp, start)); + } +rcu_read_unlock (); +} + +static void i40e_get_base_stats (struct net_device *dev, +struct netdev_queue_stats_rx *rx, +struct netdev_queue_stats_tx *tx) +{ +struct i40e_netdev_priv *np =netdev_priv (dev); +struct rtnl_link_stats64 stats = {0 }; +struct i40e_vsi *vsi = np->vsi; + + rx->bytes =0xff ; + rx->packets =0xff ; + rx->alloc_fail =0xff ; + + tx->bytes =0xff ; + tx->packets =0xff ; + +if (test_bit (__I40E_VSI_DOWN, vsi->state)) +return ; + +if (!vsi->tx_rings) +return ; + +if (!vsi->num_queue_pairs) +return ; + +i40e_get_netdev_stats_struct (dev, &stats); + + rx->bytes = stats.rx_bytes; + rx->packets = stats.rx_packets; + rx->alloc_fail = vsi->rx_buf_failed; + + tx->bytes = stats.tx_bytes; + tx->packets = stats.tx_packets; +} +/** * i40e_vsi_reset_stats - Resets all stats of the given vsi * @vsi: the VSI to have its stats reset
@@ -13693,6 +13788,12 @@ static const struct net_device_ops i40e_netdev_ops = { .ndo_dfwd_del_station = i40e_fwd_del, }; +static const struct netdev_stat_ops i40e_stat_ops = { + .get_queue_stats_rx = i40e_get_queue_stats_rx, + .get_queue_stats_tx = i40e_get_queue_stats_tx, + .get_base_stats = i40e_get_base_stats, +}; +/** * i40e_config_netdev - Setup the netdev flags * @vsi: the VSI being configured
@@ -13854,6 +13955,7 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)/* Setup netdev TC information */ i40e_vsi_config_netdev_tc (vsi, vsi->tc_config.enabled_tc); + netdev->stat_ops = &i40e_stat_ops; netdev->netdev_ops = &i40e_netdev_ops; netdev->watchdog_timeo =5 *HZ ;i40e_set_ethtool_ops (netdev);
Signature · 1 line
2.25.1