Skip to contentSkip to conversation

package/uclibc: enable time64 support

PATCH In review Waldemar Brodkorb 2 participants 3 messages Apr 14, 2024 – Jul 15, 2024

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 package/uclibc: enable time64 support

uClibc-ng supports time64 since release 1.0.46.
This commit enables it by default.
It was discussed on the mailinglist and one suggestion was to enable it by default without a config option inside buildroot.

---
 package/uclibc/uClibc-ng.config | 1 +
 1 file changed, 1 insertion(+)
package/uclibc/uClibc-ng.config +1 -0
index 5beb2bd908..0d4cbcfbbe 100644
@@ -40,3 +40,4 @@ DEVEL_PREFIX="/usr/"
 UCLIBC_HAS_SSP=y
 UCLIBC_BUILD_NOW=y
 # DOSTRIP is not set
+UCLIBC_USE_TIME64=y
Signature · 6 lines
2.30.2

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw

Hello Waldemar,

Quoted 9 lines · On Sun, 14 Apr 2024 09:36:18 +0200 Waldemar Brodkorb <[email protected]> wrote:

uClibc-ng supports time64 since release 1.0.46.
This commit enables it by default.
It was discussed on the mailinglist and one suggestion was to enable it by default without a config option inside buildroot.

---
 package/uclibc/uClibc-ng.config | 1 +
 1 file changed, 1 insertion(+)

My understanding is that since we've updated to 1.0.49, this is anyway the default, so this patch in fact isn't needed anymore, as we've already enabled 64-bit time_t on 32-bit archs with uClibc-ng since we bumped to 1.0.49. So I marked this patch as Rejected. Of course, let me know if I misunderstood the situation.

Best regards,

Thomas

Signature · 7 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#2 lore raw

Hi,
Thomas Petazzoni wrote,

Quoted 15 lines

Hello Waldemar,

Quoted 9 lines · On Sun, 14 Apr 2024 09:36:18 +0200 Waldemar Brodkorb <[email protected]> wrote:

uClibc-ng supports time64 since release 1.0.46.
This commit enables it by default.
It was discussed on the mailinglist and one suggestion was to enable it by default without a config option inside buildroot.

---
 package/uclibc/uClibc-ng.config | 1 +
 1 file changed, 1 insertion(+)
Quoted 5 lines

My understanding is that since we've updated to 1.0.49, this is anyway the default, so this patch in fact isn't needed anymore, as we've already enabled 64-bit time_t on 32-bit archs with uClibc-ng since we bumped to 1.0.49. So I marked this patch as Rejected. Of course, let me know if I misunderstood the situation.

No, perfectly fine description of the situation.

best regards
Waldemar
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot