Fixes for zone write plugging
Subsystems (2)
Damien Le Moal
maintainerv2 cover Fixes for zone write plugging
(Apologies for the churn. I sent the wrong patch 2...)
Jens,
A couple of fix patches for zone write plugging. The second fix addresses something that is in fact likely to happen in production with large servers with lots of SMR drives.
Changes from v1:
- Fix patch 2 to create the workqueue with max active set to zone plug pool size.
Damien Le Moal (2):
block: prevent freeing a zone write plug too early
block: use a per disk workqueue for zone write plugging
block/blk-zoned.c | 34 ++++++++++++++++++++++++++-------- include/linux/blkdev.h | 1 + 2 files changed, 27 insertions(+), 8 deletions(-)
Signature · 1 line
2.44.0
Damien Le Moal
maintainerPATCH v2 1/2 block: prevent freeing a zone write plug too early
The submission of plugged BIOs is done using a work struct executing the function blk_zone_wplug_bio_work(). This function gets and submits a plugged zone write BIO and is guaranteed to operate on a valid zone write plug (with a reference count higher than 0) on entry as plugged BIOs hold a reference on their zone write plugs. However, once a BIO is submitted with submit_bio_noacct_nocheck(), the BIO may complete before blk_zone_wplug_bio_work(), with the BIO completion trigering a release and freeing of the zone write plug if the BIO is the last write to a zone (making the zone FULL). This potentially can result in the zone write plug being freed while the work is still active.
Avoid this by calling flush_work() from disk_free_zone_wplug_rcu().
--- block/blk-zoned.c | 2 ++ 1 file changed, 2 insertions(+)
block/blk-zoned.c +2 -0
@@ -526,6 +526,8 @@ static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head)struct blk_zone_wplug *zwplug = container_of(rcu_head, struct blk_zone_wplug, rcu_head); +flush_work (&zwplug->bio_work); +mempool_free (zwplug, zwplug->disk->zone_wplugs_pool); }
Signature · 1 line
2.44.0
Re: [PATCH v2 1/2] block: prevent freeing a zone write plug too early
Quoted 1 line · Damien Le Moal
Avoid this by calling
flush_work()fromdisk_free_zone_wplug_rcu().
Calling flush_work from a rcu callback is just asking for nasty deadlocks.
What prevents you from just holding an extra zwplug reference while blk_zone_wplug_bio_work is running?
Damien Le Moal
maintainerRe: [PATCH v2 1/2] block: prevent freeing a zone write plug too early
Quoted 8 lines · Christoph Hellwig
Quoted 1 line · Damien Le Moal
Avoid this by calling
flush_work()fromdisk_free_zone_wplug_rcu().Calling
flush_workfrom a rcu callback is just asking for nasty deadlocks.What prevents you from just holding an extra zwplug reference while
blk_zone_wplug_bio_workis running?
Problem is that this extra reference needs to be released in blk_zone_wplug_bio_work(), before that function returns, and that is still the work thread context using zwplug->bio_work. So we always have a small window between the ref drop and the zone BIO work thread completing (context switch). If we get a BIO completion in that window and free the plug, then the BIO work struct may go away while the work thread is still referencing it.
Given that freeing of plugs will happen only after the RCU grace periods elapses, I think this is all very unlikely to happen, but at the same time, I do not see any guarantee that this cannot happen...
Signature · 2 lines
Damien Le Moal Western Digital Research
Jens Axboe
maintainerRe: [PATCH v2 1/2] block: prevent freeing a zone write plug too early
In reply to Damien Le MoalQuoted 24 lines · Damien Le Moal
The submission of plugged BIOs is done using a work struct executing the function
blk_zone_wplug_bio_work(). This function gets and submits a plugged zone write BIO and is guaranteed to operate on a valid zone write plug (with a reference count higher than 0) on entry as plugged BIOs hold a reference on their zone write plugs. However, once a BIO is submitted withsubmit_bio_noacct_nocheck(), the BIO may complete beforeblk_zone_wplug_bio_work(), with the BIO completion trigering a release and freeing of the zone write plug if the BIO is the last write to a zone (making the zone FULL). This potentially can result in the zone write plug being freed while the work is still active.Avoid this by calling
flush_work()fromdisk_free_zone_wplug_rcu().Fixes dd291d77cc90 ("block: Introduce zone write plugging")Signed-off-by Damien Le Moal <[email protected]>--- block/blk-zoned.c | 2 ++ 1 file changed, 2 insertions(+)block/blk-zoned.c +0
-0
block/blk-zoned.c static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head) · line 532
Quoted 7 lines
block/blk-zoned.c +2
-0@@ -526,6 +526,8 @@ static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head)struct blk_zone_wplug *zwplug = container_of(rcu_head, struct blk_zone_wplug, rcu_head); +flush_work (&zwplug->bio_work); +mempool_free (zwplug, zwplug->disk->zone_wplugs_pool); }
This is totally backwards. First of all, if you actually had work that needed flushing at this point, the kernel would bomb spectacularly. Secondly, what's the point of using RCU to protect this, if you're now needing to flush work from the RCU callback? That's a clear sign that something is very wrong here with your references / RCU usage.. The work item should hold a reference to it, trying to paper around it like this is not going to work at all.
Why is the work item racing with RCU freeing?!
Signature · 1 line
Jens Axboe
Damien Le Moal
maintainerRe: [PATCH v2 1/2] block: prevent freeing a zone write plug too early
Quoted 41 lines · Jens Axboe
Quoted 24 lines · Damien Le Moal
The submission of plugged BIOs is done using a work struct executing the function
blk_zone_wplug_bio_work(). This function gets and submits a plugged zone write BIO and is guaranteed to operate on a valid zone write plug (with a reference count higher than 0) on entry as plugged BIOs hold a reference on their zone write plugs. However, once a BIO is submitted withsubmit_bio_noacct_nocheck(), the BIO may complete beforeblk_zone_wplug_bio_work(), with the BIO completion trigering a release and freeing of the zone write plug if the BIO is the last write to a zone (making the zone FULL). This potentially can result in the zone write plug being freed while the work is still active.Avoid this by calling
flush_work()fromdisk_free_zone_wplug_rcu().Fixes dd291d77cc90 ("block: Introduce zone write plugging")Signed-off-by Damien Le Moal <[email protected]>--- block/blk-zoned.c | 2 ++ 1 file changed, 2 insertions(+)block/blk-zoned.c +0
-0block/blk-zoned.c static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head) · line 532
Quoted 7 lines
block/blk-zoned.c +2
-0@@ -526,6 +526,8 @@ static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head)struct blk_zone_wplug *zwplug = container_of(rcu_head, struct blk_zone_wplug, rcu_head); +flush_work (&zwplug->bio_work); +mempool_free (zwplug, zwplug->disk->zone_wplugs_pool); }This is totally backwards. First of all, if you actually had work that needed flushing at this point, the kernel would bomb spectacularly. Secondly, what's the point of using RCU to protect this, if you're now needing to flush work from the RCU callback? That's a clear sign that something is very wrong here with your references / RCU usage.. The work item should hold a reference to it, trying to paper around it like this is not going to work at all.
Quoted 1 line
Why is the work item racing with RCU freeing?!
The work item is a field of the zone write plug. Zone write plugs have references to them as long as BIOs are in flight and and the zone is not full. The zone write plug freeing through rcu is triggered by the last write to a zone that makes the zone full. But the completion of this last write BIO may happen right after the work issued the BIO with submit_bio_noacct_nocheck() and before blk_zone_wplug_bio_work() returns, while the work item is still active.
The actual freeing of the plug happens only after the rcu grace period, and I was not entirely sure if this is enough to guarantee that the work thread is finished. But checking how the workqueue code processes the work item by calling the work function (blk_zone_wplug_bio_work() in this case), there is no issue because the work item (struct work_struct) is not touched once the work function is called. So there are no issues/races with freeing the zone write plug. I was overthinking this. My bad. We can drop this patch. Apologies for the noise.
Signature · 2 lines
Damien Le Moal Western Digital Research
Jens Axboe
maintainerRe: [PATCH v2 1/2] block: prevent freeing a zone write plug too early
Quoted 52 lines · Damien Le Moal
Quoted 41 lines · Jens Axboe
Quoted 24 lines · Damien Le Moal
The submission of plugged BIOs is done using a work struct executing the function
blk_zone_wplug_bio_work(). This function gets and submits a plugged zone write BIO and is guaranteed to operate on a valid zone write plug (with a reference count higher than 0) on entry as plugged BIOs hold a reference on their zone write plugs. However, once a BIO is submitted withsubmit_bio_noacct_nocheck(), the BIO may complete beforeblk_zone_wplug_bio_work(), with the BIO completion trigering a release and freeing of the zone write plug if the BIO is the last write to a zone (making the zone FULL). This potentially can result in the zone write plug being freed while the work is still active.Avoid this by calling
flush_work()fromdisk_free_zone_wplug_rcu().Fixes dd291d77cc90 ("block: Introduce zone write plugging")Signed-off-by Damien Le Moal <[email protected]>--- block/blk-zoned.c | 2 ++ 1 file changed, 2 insertions(+)block/blk-zoned.c +0
-0block/blk-zoned.c static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head) · line 532
Quoted 7 lines
block/blk-zoned.c +2
-0@@ -526,6 +526,8 @@ static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head)struct blk_zone_wplug *zwplug = container_of(rcu_head, struct blk_zone_wplug, rcu_head); +flush_work (&zwplug->bio_work); +mempool_free (zwplug, zwplug->disk->zone_wplugs_pool); }This is totally backwards. First of all, if you actually had work that needed flushing at this point, the kernel would bomb spectacularly. Secondly, what's the point of using RCU to protect this, if you're now needing to flush work from the RCU callback? That's a clear sign that something is very wrong here with your references / RCU usage.. The work item should hold a reference to it, trying to paper around it like this is not going to work at all.
Quoted 1 line
Why is the work item racing with RCU freeing?!
The work item is a field of the zone write plug. Zone write plugs have references to them as long as BIOs are in flight and and the zone is not full. The zone write plug freeing through rcu is triggered by the last write to a zone that makes the zone full. But the completion of this last write BIO may happen right after the work issued the BIO with
submit_bio_noacct_nocheck()and beforeblk_zone_wplug_bio_work()returns, while the work item is still active.
Quoted 9 lines
The actual freeing of the plug happens only after the rcu grace period, and I was not entirely sure if this is enough to guarantee that the work thread is finished. But checking how the workqueue code processes the work item by calling the work function (
blk_zone_wplug_bio_work()in this case), there is no issue because the work item (structwork_struct) is not touched once the work function is called. So there are no issues/races with freeing the zone write plug. I was overthinking this. My bad. We can drop this patch. Apologies for the noise.
I took a closer look at the zone write plug reference handling, and it still doesn't look very good. Why are some just atomic_dec and there's just one spot that does dec_and_test? This again looks like janky referencing, to be honest.
The relationship seems like it should be pretty clear. Any bio inflight against this zone plug should have a reference to it, AND the owner should have a reference to it, otherwise any bio completion (which can happen at ANY time) could free it. Any dropping of the ref should use a helper that does atomic_dec_and_test(), eg what disk_put_zone_wplug() does.
There should be no doubt about the above at all. If the plug has been added to a workqueue, it should be quite obvious that of course it has a reference to it already, outside of the bio's that are in it.
I'd strongly encourage getting this sorted out before the merge window, I'm not at all convinced it's correct as-is. It's certainly not obviously correct, which it should be. The RCU rules are pretty simple if the the references are done in the kernel idiomatic way, but they are not.
Signature · 1 line
Jens Axboe
Damien Le Moal
maintainerRe: [PATCH v2 1/2] block: prevent freeing a zone write plug too early
Quoted 79 lines · Jens Axboe
Quoted 52 lines · Damien Le Moal
Quoted 41 lines · Jens Axboe
Quoted 24 lines · Damien Le Moal
The submission of plugged BIOs is done using a work struct executing the function
blk_zone_wplug_bio_work(). This function gets and submits a plugged zone write BIO and is guaranteed to operate on a valid zone write plug (with a reference count higher than 0) on entry as plugged BIOs hold a reference on their zone write plugs. However, once a BIO is submitted withsubmit_bio_noacct_nocheck(), the BIO may complete beforeblk_zone_wplug_bio_work(), with the BIO completion trigering a release and freeing of the zone write plug if the BIO is the last write to a zone (making the zone FULL). This potentially can result in the zone write plug being freed while the work is still active.Avoid this by calling
flush_work()fromdisk_free_zone_wplug_rcu().Fixes dd291d77cc90 ("block: Introduce zone write plugging")Signed-off-by Damien Le Moal <[email protected]>--- block/blk-zoned.c | 2 ++ 1 file changed, 2 insertions(+)block/blk-zoned.c +0
-0block/blk-zoned.c static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head) · line 532
Quoted 7 lines
block/blk-zoned.c +2
-0@@ -526,6 +526,8 @@ static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head)struct blk_zone_wplug *zwplug = container_of(rcu_head, struct blk_zone_wplug, rcu_head); +flush_work (&zwplug->bio_work); +mempool_free (zwplug, zwplug->disk->zone_wplugs_pool); }This is totally backwards. First of all, if you actually had work that needed flushing at this point, the kernel would bomb spectacularly. Secondly, what's the point of using RCU to protect this, if you're now needing to flush work from the RCU callback? That's a clear sign that something is very wrong here with your references / RCU usage.. The work item should hold a reference to it, trying to paper around it like this is not going to work at all.
Quoted 1 line
Why is the work item racing with RCU freeing?!
The work item is a field of the zone write plug. Zone write plugs have references to them as long as BIOs are in flight and and the zone is not full. The zone write plug freeing through rcu is triggered by the last write to a zone that makes the zone full. But the completion of this last write BIO may happen right after the work issued the BIO with
submit_bio_noacct_nocheck()and beforeblk_zone_wplug_bio_work()returns, while the work item is still active.Quoted 9 lines
The actual freeing of the plug happens only after the rcu grace period, and I was not entirely sure if this is enough to guarantee that the work thread is finished. But checking how the workqueue code processes the work item by calling the work function (
blk_zone_wplug_bio_work()in this case), there is no issue because the work item (structwork_struct) is not touched once the work function is called. So there are no issues/races with freeing the zone write plug. I was overthinking this. My bad. We can drop this patch. Apologies for the noise.I took a closer look at the zone write plug reference handling, and it still doesn't look very good. Why are some just
atomic_decand there's just one spot that doesdec_and_test? This again looks like janky referencing, to be honest.The relationship seems like it should be pretty clear. Any bio inflight against this zone plug should have a reference to it, AND the owner should have a reference to it, otherwise any bio completion (which can happen at ANY time) could free it. Any dropping of the ref should use a helper that does
atomic_dec_and_test(), eg whatdisk_put_zone_wplug()does.There should be no doubt about the above at all. If the plug has been added to a workqueue, it should be quite obvious that of course it has a reference to it already, outside of the bio's that are in it.
Quoted 5 lines
I'd strongly encourage getting this sorted out before the merge window, I'm not at all convinced it's correct as-is. It's certainly not obviously correct, which it should be. The RCU rules are pretty simple if the the references are done in the kernel idiomatic way, but they are not.
OK. I am traveling this week so I will not be able to send a well-tested cleanup patch but I will do so first thing next week.
Signature · 2 lines
Damien Le Moal Western Digital Research
Jens Axboe
maintainerRe: [PATCH v2 1/2] block: prevent freeing a zone write plug too early
Quoted 80 lines · Damien Le Moal
Quoted 79 lines · Jens Axboe
Quoted 52 lines · Damien Le Moal
Quoted 41 lines · Jens Axboe
Quoted 24 lines · Damien Le Moal
The submission of plugged BIOs is done using a work struct executing the function
blk_zone_wplug_bio_work(). This function gets and submits a plugged zone write BIO and is guaranteed to operate on a valid zone write plug (with a reference count higher than 0) on entry as plugged BIOs hold a reference on their zone write plugs. However, once a BIO is submitted withsubmit_bio_noacct_nocheck(), the BIO may complete beforeblk_zone_wplug_bio_work(), with the BIO completion trigering a release and freeing of the zone write plug if the BIO is the last write to a zone (making the zone FULL). This potentially can result in the zone write plug being freed while the work is still active.Avoid this by calling
flush_work()fromdisk_free_zone_wplug_rcu().Fixes dd291d77cc90 ("block: Introduce zone write plugging")Signed-off-by Damien Le Moal <[email protected]>--- block/blk-zoned.c | 2 ++ 1 file changed, 2 insertions(+)block/blk-zoned.c +0
-0block/blk-zoned.c static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head) · line 532
Quoted 7 lines
block/blk-zoned.c +2
-0@@ -526,6 +526,8 @@ static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head)struct blk_zone_wplug *zwplug = container_of(rcu_head, struct blk_zone_wplug, rcu_head); +flush_work (&zwplug->bio_work); +mempool_free (zwplug, zwplug->disk->zone_wplugs_pool); }This is totally backwards. First of all, if you actually had work that needed flushing at this point, the kernel would bomb spectacularly. Secondly, what's the point of using RCU to protect this, if you're now needing to flush work from the RCU callback? That's a clear sign that something is very wrong here with your references / RCU usage.. The work item should hold a reference to it, trying to paper around it like this is not going to work at all.
Quoted 1 line
Why is the work item racing with RCU freeing?!
The work item is a field of the zone write plug. Zone write plugs have references to them as long as BIOs are in flight and and the zone is not full. The zone write plug freeing through rcu is triggered by the last write to a zone that makes the zone full. But the completion of this last write BIO may happen right after the work issued the BIO with
submit_bio_noacct_nocheck()and beforeblk_zone_wplug_bio_work()returns, while the work item is still active.Quoted 9 lines
The actual freeing of the plug happens only after the rcu grace period, and I was not entirely sure if this is enough to guarantee that the work thread is finished. But checking how the workqueue code processes the work item by calling the work function (
blk_zone_wplug_bio_work()in this case), there is no issue because the work item (structwork_struct) is not touched once the work function is called. So there are no issues/races with freeing the zone write plug. I was overthinking this. My bad. We can drop this patch. Apologies for the noise.I took a closer look at the zone write plug reference handling, and it still doesn't look very good. Why are some just
atomic_decand there's just one spot that doesdec_and_test? This again looks like janky referencing, to be honest.The relationship seems like it should be pretty clear. Any bio inflight against this zone plug should have a reference to it, AND the owner should have a reference to it, otherwise any bio completion (which can happen at ANY time) could free it. Any dropping of the ref should use a helper that does
atomic_dec_and_test(), eg whatdisk_put_zone_wplug()does.There should be no doubt about the above at all. If the plug has been added to a workqueue, it should be quite obvious that of course it has a reference to it already, outside of the bio's that are in it.
Quoted 8 lines
Quoted 5 lines
I'd strongly encourage getting this sorted out before the merge window, I'm not at all convinced it's correct as-is. It's certainly not obviously correct, which it should be. The RCU rules are pretty simple if the the references are done in the kernel idiomatic way, but they are not.
OK. I am traveling this week so I will not be able to send a well-tested cleanup patch but I will do so first thing next week.
Sounds good, thanks.
Signature · 1 line
Jens Axboe
Damien Le Moal
maintainerPATCH v2 2/2 block: use a per disk workqueue for zone write plugging
In reply to Damien Le MoalA zone write plug BIO work function blk_zone_wplug_bio_work() calls submit_bio_noacct_nocheck() to execute the next unplugged BIO. This function may block. So executing zone plugs BIO works using the block layer global kblockd workqueue can potentially lead to preformance or latency issues as the number of concurrent work for a workqueue is limited to WQ_DFL_ACTIVE (256).
1) For a system with a large number of zoned disks, issuing write requests to otherwise unused zones may be delayed wiating for a work thread to become available.
2) Requeue operations which use kblockd but are independent of zone write plugging may alsoi end up being delayed.
To avoid these potential performance issues, create a workqueue per zoned device to execute zone plugs BIO work. The workqueue max active parameter is set to the maximum number of zone write plugs allocated with the zone write plug mempool. This limit is equal to the maximum number of open zones of the disk and defaults to 128 for disks that do not have a limit on the number of open zones.
--- block/blk-zoned.c | 32 ++++++++++++++++++++++++-------- include/linux/blkdev.h | 1 + 2 files changed, 25 insertions(+), 8 deletions(-)
block/blk-zoned.c +24 -8
@@ -1131,7 +1131,7 @@ static void disk_zone_wplug_unplug_bio(struct gendisk *disk,/* Schedule submission of the next plugged BIO if we have one. */ if (!bio_list_empty (&zwplug->bio_list)) {spin_unlock_irqrestore (&zwplug->lock, flags); -kblockd_schedule_work (&zwplug->bio_work); +queue_work (disk->zone_wplugs_wq, &zwplug->bio_work);return ; }
@@ -1334,7 +1334,7 @@ static void disk_zone_wplug_handle_error(struct gendisk *disk,/* Restart BIO submission if we still have any BIO left. */ if (!bio_list_empty (&zwplug->bio_list)) {WARN_ON_ONCE (!(zwplug->flags &BLK_ZONE_WPLUG_PLUGGED )); -kblockd_schedule_work (&zwplug->bio_work); +queue_work (disk->zone_wplugs_wq, &zwplug->bio_work); goto unlock; }
@@ -1411,14 +1411,25 @@ static int disk_alloc_zone_resources(struct gendisk *disk, disk->zone_wplugs_pool =mempool_create_kmalloc_pool (pool_size,sizeof (struct blk_zone_wplug )); -if (!disk->zone_wplugs_pool) { -kfree (disk->zone_wplugs_hash); - disk->zone_wplugs_hash =NULL ; - disk->zone_wplugs_hash_bits =0 ; -return -ENOMEM ; - } +if (!disk->zone_wplugs_pool) + goto free_hash; + + disk->zone_wplugs_wq = +alloc_workqueue ("%s_zwplugs" ,WQ_MEM_RECLAIM |WQ_HIGHPRI , + pool_size, disk->disk_name); +if (!disk->zone_wplugs_wq) + goto destroy_pool;return 0 ; + +destroy_pool: +mempool_destroy (disk->zone_wplugs_pool); + disk->zone_wplugs_pool =NULL ; +free_hash: +kfree (disk->zone_wplugs_hash); + disk->zone_wplugs_hash =NULL ; + disk->zone_wplugs_hash_bits =0 ; +return -ENOMEM ; }static void disk_destroy_zone_wplugs_hash_table (struct gendisk *disk)
@@ -1449,6 +1460,11 @@ void disk_free_zone_resources(struct gendisk *disk) {cancel_work_sync (&disk->zone_wplugs_work); +if (disk->zone_wplugs_wq) { +destroy_workqueue (disk->zone_wplugs_wq); + disk->zone_wplugs_wq =NULL ; + } +disk_destroy_zone_wplugs_hash_table (disk);/*
include/linux/blkdev.h +1 -0
@@ -191,6 +191,7 @@ struct gendisk {struct hlist_head *zone_wplugs_hash;struct list_head zone_wplugs_err_list;struct work_struct zone_wplugs_work; +struct workqueue_struct *zone_wplugs_wq;#endif /* CONFIG_BLK_DEV_ZONED */ #if IS_ENABLED (CONFIG_CDROM )
Signature · 1 line
2.44.0
Re: [PATCH v2 2/2] block: use a per disk workqueue for zone write plugging
Quoted 12 lines · Damien Le Moal
A zone write plug BIO work function
blk_zone_wplug_bio_work()callssubmit_bio_noacct_nocheck()to execute the next unplugged BIO. This function may block. So executing zone plugs BIO works using the block layer global kblockd workqueue can potentially lead to preformance or latency issues as the number of concurrent work for a workqueue is limited toWQ_DFL_ACTIVE(256).
1) For a system with a large number of zoned disks, issuing write requests to otherwise unused zones may be delayed wiating for a work thread to become available.
2) Requeue operations which use kblockd but are independent of zone write plugging may alsoi end up being delayed.
Quoted 6 lines
To avoid these potential performance issues, create a workqueue per zoned device to execute zone plugs BIO work. The workqueue max active parameter is set to the maximum number of zone write plugs allocated with the zone write plug mempool. This limit is equal to the maximum number of open zones of the disk and defaults to 128 for disks that do not have a limit on the number of open zones.
Looks good:
Should the zone write plug submission do non-blocking submissions as well to avoid stalling in the workqueue thread all the time?
Damien Le Moal
maintainerRe: [PATCH v2 2/2] block: use a per disk workqueue for zone write plugging
Quoted 20 lines · Christoph Hellwig
Quoted 12 lines · Damien Le Moal
A zone write plug BIO work function
blk_zone_wplug_bio_work()callssubmit_bio_noacct_nocheck()to execute the next unplugged BIO. This function may block. So executing zone plugs BIO works using the block layer global kblockd workqueue can potentially lead to preformance or latency issues as the number of concurrent work for a workqueue is limited toWQ_DFL_ACTIVE(256).
1) For a system with a large number of zoned disks, issuing write requests to otherwise unused zones may be delayed wiating for a work thread to become available.
2) Requeue operations which use kblockd but are independent of zone write plugging may alsoi end up being delayed.Quoted 6 lines
To avoid these potential performance issues, create a workqueue per zoned device to execute zone plugs BIO work. The workqueue max active parameter is set to the maximum number of zone write plugs allocated with the zone write plug mempool. This limit is equal to the maximum number of open zones of the disk and defaults to 128 for disks that do not have a limit on the number of open zones.
Quoted 6 lines
Looks good:
Reviewed-by Christoph Hellwig <[email protected]>Should the zone write plug submission do non-blocking submissions as well to avoid stalling in the workqueue thread all the time?
I do not think that the stalling actually happens that often. The 2 main cases I see are:
1) Out of tag so we block on tag allocation when preparing the request in submit_bio_noacct_nocheck(), or
2) The device has BLK_MQ_F_BLOCKING set for its tag set (e.g. nullblk with memory backing).
For (1), we could use RQF_NOWAIT to prevent blocking, but then we would need to retry later on with a timer to make forward progress for the plug. And I do not think we can actually avoid (2). So in the end, I do not see a clean way to completely avoid blocking in all cases.
Signature · 2 lines
Damien Le Moal Western Digital Research
Re: (subset) [PATCH v2 0/2] Fixes for zone write plugging
In reply to Damien Le MoalQuoted 9 lines · Damien Le Moal
(Apologies for the churn. I sent the wrong patch 2...)
Jens,
A couple of fix patches for zone write plugging. The second fix addresses something that is in fact likely to happen in production with large servers with lots of SMR drives.
[...]
Applied, thanks!
[2/2] block: use a per disk workqueue for zone write plugging
commit: a8f59e5a5deaf3e99a8b7252e96cee9af67858a9
Best regards,
Signature · 1 line
Jens Axboe