drm/panel: ili9341: Obvious fixes
Subsystems (3)
cover drm/panel: ili9341: Obvious fixes
A few obvious fixes to the driver.
Andy Shevchenko (3):
drm/panel: ili9341: Correct use of device property APIs drm/panel: ili9341: Respect deferred probe drm/panel: ili9341: Use predefined error codes
drivers/gpu/drm/panel/Kconfig | 2 +- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 13 +++++++------ 2 files changed, 8 insertions(+), 7 deletions(-)
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
PATCH 1/3 drm/panel: ili9341: Correct use of device property APIs
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
--- drivers/gpu/drm/panel/Kconfig | 2 +- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/panel/Kconfig +1 -1
@@ -177,7 +177,7 @@ config DRM_PANEL_ILITEK_IL9322 config DRM_PANEL_ILITEK_ILI9341 tristate "Ilitek ILI9341 240x320 QVGA panels" - depends on OF && SPI + depends on SPI select DRM_KMS_HELPER select DRM_GEM_DMA_HELPER depends on BACKLIGHT_CLASS_DEVICE
drivers/gpu/drm/panel/panel-ilitek-ili9341.c +3 -2
@@ -22,8 +22,9 @@#include <linux/bitops.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> -#include <linux/of.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/spi/spi.h>
@@ -691,7 +692,7 @@ static int ili9341_dpi_probe(struct spi_device *spi, struct gpio_desc *dc,* Every new incarnation of this display must have a unique * data entry for the system in this driver. */ - ili->conf =of_device_get_match_data (dev); + ili->conf =device_get_match_data (dev);if (!ili->conf) {dev_err (dev,"missing device configuration\n" );return -ENODEV ;
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
Re: [PATCH v1 1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 39 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
Fixes 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")Signed-off-by Andy Shevchenko <[email protected]>--- drivers/gpu/drm/panel/Kconfig | 2 +- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-)drivers/gpu/drm/panel/Kconfig +1
-1@@ -177,7 +177,7 @@ config DRM_PANEL_ILITEK_IL9322 config DRM_PANEL_ILITEK_ILI9341 tristate "Ilitek ILI9341 240x320 QVGA panels" - depends on OF && SPI + depends on SPI select DRM_KMS_HELPER select DRM_GEM_DMA_HELPER depends on BACKLIGHT_CLASS_DEVICEdrivers/gpu/drm/panel/panel-ilitek-ili9341.c +2
-1@@ -22,8 +22,9 @@#include <linux/bitops.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> -#include <linux/of.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/spi/spi.h>
drivers/gpu/drm/panel/panel-ilitek-ili9341.c static int ili9341_dpi_probe(struct spi_device *spi, struct gpio_desc *dc, · line 698
Quoted 8 lines
drivers/gpu/drm/panel/panel-ilitek-ili9341.c +1
-1@@ -691,7 +692,7 @@ static int ili9341_dpi_probe(struct spi_device *spi, struct gpio_desc *dc,* Every new incarnation of this display must have a unique * data entry for the system in this driver. */ - ili->conf =of_device_get_match_data (dev); + ili->conf =device_get_match_data (dev);if (!ili->conf) {dev_err (dev,"missing device configuration\n" );return -ENODEV ;
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
In reply to Andy ShevchenkoHi,
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Simple because the "ili9341_probe() ---> ili9341_dbi_prob()" code path is DT dependent.
First of all, the devm_of_find_backlight() is called in ili9341_dbi_probe() under *non-DT* environment, devm_of_find_backlight() is just a just a no-op and will return NULL. NULL is not an error code, so ili9341_dbi_probe() won't rage quit. But the several side effect is that the backlight will NOT works at all.
It is actually considered as fatal bug for *panels* if the backlight of it is not light up, at least the brightness of *won't* be able to adjust. What's worse, if there is no sane platform setup code at the firmware or boot loader stage to set a proper initial state. The screen is complete dark. Even though the itself panel is refreshing framebuffers, it can not be seen by human's eye. Simple because of no backlight.
Second, the ili9341_dbi_probe() requires additional device properties to be able to works very well on the rotation screen case. See the calling of "device_property_read_u32(dev, "rotation", &rotation)" in ili9341_dbi_probe() function.
Combine with those two factors, it is actually can conclude that the panel-ilitek-ili9394 driver has the *implicit* dependency on 'OF'. Removing the 'OF' dependency from its Kconfig just trigger the leakage of such risks.
My software node related patches can help to reduce part of the potential risks, but it still need some extra work. And it is not landed yet.
Quoted 45 lines
Fixes 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")Signed-off-by Andy Shevchenko <[email protected]>Reviewed-by Neil Armstrong <[email protected]>--- drivers/gpu/drm/panel/Kconfig | 2 +- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-)drivers/gpu/drm/panel/Kconfig +1
-1@@ -177,7 +177,7 @@ config DRM_PANEL_ILITEK_IL9322 config DRM_PANEL_ILITEK_ILI9341 tristate "Ilitek ILI9341 240x320 QVGA panels" - depends on OF && SPI + depends on SPI select DRM_KMS_HELPER select DRM_GEM_DMA_HELPER depends on BACKLIGHT_CLASS_DEVICEdrivers/gpu/drm/panel/panel-ilitek-ili9341.c +3
-2@@ -22,8 +22,9 @@#include <linux/bitops.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> -#include <linux/of.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/spi/spi.h> @@ -691,7 +692,7 @@ static int ili9341_dpi_probe(struct spi_device *spi, struct gpio_desc *dc,* Every new incarnation of this display must have a unique * data entry for the system in this driver. */ - ili->conf =of_device_get_match_data (dev); + ili->conf =device_get_match_data (dev);if (!ili->conf) {dev_err (dev,"missing device configuration\n" );return -ENODEV ;
Signature · 2 lines
Best regards, Sui
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Hi,
Quoted 9 lines · Sui Jingfeng
Hi,
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Using the word 'seems' here exactly saying that you are not 100% sure.
Quoted 2 lines
And this patch is has the risks to be wrong.
This patch has the risks of to be wrong.
Quoted 3 lines
Simple because the "
ili9341_probe()--->ili9341_dbi_prob()" code path is DT dependent.
Simply because part of the driver is DT dependent, plus its code(implementation) is deep(tight) coupling, as a result, it is became total DT dependent.
Quoted 1 line
First of all, the
devm_of_find_backlight()is called inili9341_dbi_probe()
,
Quoted 1 line
under *non-DT* environment,
Under *non-DT* environment, the use case probably should take into consideration. Since you remove it, then we can't stop imagining. But if we really care about the usage case on DT based systems, There is *NO* difference between the device_get_match_data() and the of_device_get_match_data(). This is the reason why I'm saying that you patch has the *ZERO* effects.
And again, on non-DT systems, if there is no acpi_device_id stuff, calling the device_get_match_data() function will just get NULL. Which is nearly a undefined behavior. So the 'OF 'removal is don't really make much sense.
But there is a way to save the awkward situation, that is, helps to get this patch[1] merged. Then we still tenable both at the practice side and at the concept side.
[1] https://patchwork.freedesktop.org/patch/590653/?series=131296&rev=2
Quoted 2 lines
devm_of_find_backlight()is just a just a no-op and will return NULL. NULL is not an error code, soili9341_dbi_probe()won't rage quit.
[...]
Quoted 2 lines
But the several side effect is that the backlight will NOT works at all.
s/several/severe
Quoted 2 lines
It is actually considered as fatal bug for *panels* if the backlight of it is not light up,
It's fatal error if backlight is not adjustable or not light-up at all.
Quoted 1 line
[...]
Quoted 1 line
Even though the itself panel is refreshing framebuffers,
Even though the panel itself is consuming frame-buffers and displaying. But if the backlight not work, the screen is extremely dark, we can not see as well.
Besides the ili9341_dbi_probe() requires additional device properties to able to work very well. Especially on the rotate screen use case.
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 1 line · Sui Jingfeng
On 2024/4/26 02:08, Sui Jingfeng wrote:
Are you speaking to yourself? I'm totally lost.
Please, if you want to give a constructive feedback, try to understand the topic from different aspects and then clearly express it.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Hi,
Quoted 7 lines · Andy Shevchenko
Quoted 1 line · Sui Jingfeng
On 2024/4/26 02:08, Sui Jingfeng wrote:
Are you speaking to yourself? I'm totally lost.
Please, if you want to give a constructive feedback, try to understand the topic from different aspects and then clearly express it.
OK,
The previous email analysis the non-DT cases exhaustively, this email intend to demonstrate the more frequently use case.
That is, in the *DT('OF')* based systems,device_get_match_data() is completely equivalent to of_device_get_match_data(). So the net results of applying this patch are "no gains and no lost".
Things will become clear if we divide the whole problem into two cases(DT and non-DT) to discuss, that's it. That's all I can tell.
Sorry about my broken written and sorry for the noise. Thanks for your education in the past.
Signature · 2 lines
Best regards, Sui
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 3 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
Quoted 1 line · Sui Jingfeng
On 2024/4/26 02:08, Sui Jingfeng wrote:
...
Quoted 7 lines
Quoted 4 lines
Are you speaking to yourself? I'm totally lost.
Please, if you want to give a constructive feedback, try to understand the topic from different aspects and then clearly express it.
OK,
Quoted 8 lines
The previous email analysis the non-DT cases exhaustively, this email intend to demonstrate the more frequently use case.
That is, in the *DT('OF')* based systems,
device_get_match_data()is completely equivalent toof_device_get_match_data().So the net results of applying this patch are "no gains and no lost".
This is not true. It's only part of the cases, i.e. DT. So, I assume you meant
"So the net results of applying this patch are "no gains and no lost" in DT case".
Quoted 2 lines
Things will become clear if we divide the whole problem into two cases(DT and non-DT) to discuss, that's it. That's all I can tell.
Not really. non-DT cases can also be divided to "fwnode backed or not", and the former might be subdivided to "is it swnode backed or real fwnode one?"
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 12 lines · Andy Shevchenko
Quoted 3 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
Quoted 1 line · Sui Jingfeng
On 2024/4/26 02:08, Sui Jingfeng wrote:
...
Quoted 6 lines
Quoted 4 lines
Are you speaking to yourself? I'm totally lost.
Please, if you want to give a constructive feedback, try to understand the topic from different aspects and then clearly express it.
OK,
Quoted 8 lines
Quoted 7 lines
The previous email analysis the non-DT cases exhaustively, this email intend to demonstrate the more frequently use case.
That is, in the *DT('OF')* based systems,
device_get_match_data()is completely equivalent toof_device_get_match_data().
So the net results of applying this patch are "no gains and no lost".This is not true.
Yes, I'm true.
I have mentionedin previous(earlier) paragraph with "in the DT(OF) based systems" or similar words.
Quoted 3 lines
It's only part of the cases, i.e. DT. So, I assume you meant
"So the net results of applying this patch are "no gains and no lost" in DT case".
Yeah,it is true that this patch are "no gains and no lost" in DT case.
Quoted 3 lines
Quoted 2 lines
Things will become clear if we divide the whole problem into two cases(DT and non-DT) to discuss, that's it. That's all I can tell.
Not really.
I'm very clear before our conversation, really!
Quoted 1 line
non-DT cases can also be divided to "fwnode backed or not",
For non fwnode backed case of non-DT cases, there is not decent way to acquire large set of device properties. And is out of the scope of "Correct use of device property APIs".
Quoted 3 lines
and
the former might be subdivided to "is it swnode backed or real fwnode one?"
Yeah,
On non-DT cases, it can be subdivided to swnode backed case and ACPI fwnode backed case.
- For swnode backed case: the device_get_match_data() don't has a implemented backend.
- For ACPI fwnode backed case: the device_get_match_data() has a implemented backend.
But the driver has *neither* software node support nor ACPI support, so that the rotation property can not get and ili9341_dpi_probe() will fails. So in total, this is not a 100% correct use of device property APIs.
But I'm fine that if you want to leave(ignore) those less frequent use cases temporarily, there may have programmers want to post patches, to complete the missing in the future.
So, there do have some gains on non-DT cases.
- As you make it be able to compiled on X86 with the drm-misc-defconfig.
- You cleanup the code up (at least patch 2 in this series is no obvious problem).
- You allow people to modprobe it, and maybe half right and half undefined.
But you do helps moving something forward, so congratulations for the wake up.
Signature · 2 lines
Best regards, Sui
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 2 lines · Sui Jingfeng
Quoted 1 line · Andy Shevchenko
On Fri, Apr 26, 2024 at 05:13:43AM +0800, Sui Jingfeng wrote:
...
Quoted 9 lines
Quoted 2 lines
the former might be subdivided to "is it swnode backed or real fwnode one?"
Yeah,
On non-DT cases, it can be subdivided to swnode backed case and ACPI fwnode backed case.- For swnode backed case: the
device_get_match_data()don't has a implemented backend.
- For ACPI fwnode backed case: thedevice_get_match_data()has a implemented backend.But the driver has *neither* software node support
True.
Quoted 1 line
nor ACPI support,
Not true.
So, slow down and take your time to get into the code and understand how it works.
Quoted 13 lines
so that the rotation property can not get and
ili9341_dpi_probe()will fails. So in total, this is not a 100% correct use of device property APIs.But I'm fine that if you want to leave(ignore) those less frequent use cases temporarily, there may have programmers want to post patches, to complete the missing in the future.
So, there do have some gains on non-DT cases.
- As you make it be able to compiled on X86 with the drm-misc-defconfig.
- You cleanup the code up (at least patch 2 in this series is no obvious problem).
- You allow people to modprobe it, and maybe half right and half undefined.But you do helps moving something forward, so congratulations for the wake up.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Hi,
Quoted 10 lines · Andy Shevchenko
Quoted 2 lines · Sui Jingfeng
Quoted 1 line · Andy Shevchenko
On Fri, Apr 26, 2024 at 05:13:43AM +0800, Sui Jingfeng wrote:
...
Quoted 5 lines
Quoted 2 lines
the former might be subdivided to "is it swnode backed or real fwnode one?"
Yeah,
On non-DT cases, it can be subdivided to swnode backed case and ACPI fwnode backed case.
Quoted 8 lines
Quoted 4 lines
- For swnode backed case: the
device_get_match_data()don't has a implemented backend.
- For ACPI fwnode backed case: thedevice_get_match_data()has a implemented backend.But the driver has *neither* software node support
True.
Quoted 1 line
nor ACPI support,
Not true.
Why this is not true? Are you means that the panel-ilitek-ili9341 driver has ACPI support? I'm asking because I don't see struct acpi_device_id related stuff in that source file, am I miss something?
Quoted 15 lines
So, slow down and take your time to get into the code and understand how it works.
Quoted 13 lines
so that the rotation property can not get and
ili9341_dpi_probe()will fails. So in total, this is not a 100% correct use of device property APIs.But I'm fine that if you want to leave(ignore) those less frequent use cases temporarily, there may have programmers want to post patches, to complete the missing in the future.
So, there do have some gains on non-DT cases.
- As you make it be able to compiled on X86 with the drm-misc-defconfig.
- You cleanup the code up (at least patch 2 in this series is no obvious problem).
- You allow people to modprobe it, and maybe half right and half undefined.But you do helps moving something forward, so congratulations for the wake up.
Signature · 2 lines
Best regards, Sui
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 4 lines · Sui Jingfeng
Quoted 3 lines · Andy Shevchenko
Quoted 2 lines · Sui Jingfeng
Quoted 1 line · Andy Shevchenko
On Fri, Apr 26, 2024 at 05:13:43AM +0800, Sui Jingfeng wrote:
...
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 2 lines
the former might be subdivided to "is it swnode backed or real fwnode one?"
Yeah,
On non-DT cases, it can be subdivided to swnode backed case and ACPI fwnode backed case.- For swnode backed case: the
device_get_match_data()don't has a implemented backend.
- For ACPI fwnode backed case: thedevice_get_match_data()has a implemented backend.
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
But the driver has *neither* software node support
True.
Quoted 1 line
nor ACPI support,
Not true.
Why this is not true? Are you means that the panel-ilitek-ili9341 driver has ACPI support?
That's the idea (as far as I see the copy of the code from tinyDRM), but broken over the copy'n'paste. This patch rectifies that to be in align with the original code, which *does* support ACPI.
Quoted 2 lines
I'm asking because I don't see struct
acpi_device_idrelated stuff in that source file, am I miss something?
Yes, you are. I leave it for you to research.
Quoted 15 lines
Quoted 15 lines
So, slow down and take your time to get into the code and understand how it works.
Quoted 13 lines
so that the rotation property can not get and
ili9341_dpi_probe()will fails. So in total, this is not a 100% correct use of device property APIs.But I'm fine that if you want to leave(ignore) those less frequent use cases temporarily, there may have programmers want to post patches, to complete the missing in the future.
So, there do have some gains on non-DT cases.
- As you make it be able to compiled on X86 with the drm-misc-defconfig.
- You cleanup the code up (at least patch 2 in this series is no obvious problem).
- You allow people to modprobe it, and maybe half right and half undefined.But you do helps moving something forward, so congratulations for the wake up.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Hi,
Quoted 20 lines · Andy Shevchenko
Quoted 4 lines · Sui Jingfeng
Quoted 3 lines · Andy Shevchenko
Quoted 2 lines · Sui Jingfeng
Quoted 1 line · Andy Shevchenko
On Fri, Apr 26, 2024 at 05:13:43AM +0800, Sui Jingfeng wrote:
...
Quoted 13 lines
Quoted 13 lines
Quoted 9 lines
Quoted 2 lines
the former might be subdivided to "is it swnode backed or real fwnode one?"
Yeah,
On non-DT cases, it can be subdivided to swnode backed case and ACPI fwnode backed case.- For swnode backed case: the
device_get_match_data()don't has a implemented backend.
- For ACPI fwnode backed case: thedevice_get_match_data()has a implemented backend.But the driver has *neither* software node support
True.
Quoted 1 line
nor ACPI support,
Not true.
Quoted 9 lines
Quoted 1 line
Why this is not true? Are you means that the panel-ilitek-ili9341 driver has ACPI support?
That's the idea (as far as I see the copy of the code from tinyDRM), but broken over the copy'n'paste. This patch rectifies that to be in align with the original code, which *does* support ACPI.
Quoted 2 lines
I'm asking because I don't see struct
acpi_device_idrelated stuff in that source file, am I miss something?Yes, you are. I leave it for you to research.
After researching a few hours I still don't understand how does the panel-ilitek-ili9341 driver has the ACPI support and be able to ACPI probed when compiled as module.
As far as I know, drivers that has the ACPI support *must* has the .acpi_match_table hooked, so that be able to be probed when the driver is compiled as a module.
For example, see commit 75a1b44a54bd9 ("spi: tegra210-quad: add acpi support") to get a feel what a SPI device with *real* ACPI support looks like.
I have double checked the panel-ilitek-ili9341 driver, it doesn't has acpi_match_table hooked, which means that this driver won't even be able probed. And probed as pure SPI device still out of the scope of "correct use of device property APIs". Because SPI device specific method don't belong to the device property API.
I don't really know what's we are missing, but we already intend to let it go, thanks.
Quoted 15 lines
Quoted 15 lines
Quoted 15 lines
So, slow down and take your time to get into the code and understand how it works.
Quoted 13 lines
so that the rotation property can not get and
ili9341_dpi_probe()will fails. So in total, this is not a 100% correct use of device property APIs.But I'm fine that if you want to leave(ignore) those less frequent use cases temporarily, there may have programmers want to post patches, to complete the missing in the future.
So, there do have some gains on non-DT cases.
- As you make it be able to compiled on X86 with the drm-misc-defconfig.
- You cleanup the code up (at least patch 2 in this series is no obvious problem).
- You allow people to modprobe it, and maybe half right and half undefined.But you do helps moving something forward, so congratulations for the wake up.
Signature · 2 lines
Best regards, Sui
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 6 lines · Sui Jingfeng
Quoted 5 lines · Andy Shevchenko
Quoted 4 lines · Sui Jingfeng
Quoted 3 lines · Andy Shevchenko
Quoted 2 lines · Sui Jingfeng
Quoted 1 line · Andy Shevchenko
On Fri, Apr 26, 2024 at 05:13:43AM +0800, Sui Jingfeng wrote:
...
Quoted 22 lines
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 9 lines
Quoted 2 lines
the former might be subdivided to "is it swnode backed or real fwnode one?"
Yeah,
On non-DT cases, it can be subdivided to swnode backed case and ACPI fwnode backed case.- For swnode backed case: the
device_get_match_data()don't has a implemented backend.
- For ACPI fwnode backed case: thedevice_get_match_data()has a implemented backend.But the driver has *neither* software node support
True.
Quoted 1 line
nor ACPI support,
Not true.
Quoted 8 lines
Quoted 1 line
Why this is not true? Are you means that the panel-ilitek-ili9341 driver has ACPI support?
That's the idea (as far as I see the copy of the code from tinyDRM), but broken over the copy'n'paste. This patch rectifies that to be in align with the original code, which *does* support ACPI.
Quoted 2 lines
I'm asking because I don't see struct
acpi_device_idrelated stuff in that source file, am I miss something?Yes, you are. I leave it for you to research.
Quoted 7 lines
After researching a few hours I still don't understand how does the panel-ilitek-ili9341 driver has the ACPI support and be able to ACPI probed when compiled as module.
As far as I know, drivers that has the ACPI support *must* has the .acpi_match_table hooked, so that be able to be probed when the driver is compiled as a module.
No, and this is the thing. Hint: there is a glue code to reuse compatible strings from OF, that's why dependency to OF prevents *some* systems from being able to use that. But it's easy to fix by enabling OF in the configuration, however the ID tables are orthogonal to the environment. That's why all those ACPI_PTR() and of_match_ptr() are design mistakes that are going to be removed eventually (the work is ongoing, btw, as well as killing specific *_device_get_match_data() calls).
Quoted 2 lines
For example, see commit
75a1b44a54bd9("spi: tegra210-quad: add acpi support") to get a feel what a SPI device with *real* ACPI support looks like.
If under *real* you assume the allocated _HID in use, yes, that's how it's done. But there is the other tricky way of achieving similar effect w/o allocating a new / custom ACPI _HID.
Hint: it's all documented in kernel under firmware-guide/acpi/.
Quoted 23 lines
I have double checked the panel-ilitek-ili9341 driver, it doesn't has
acpi_match_tablehooked, which means that this driver won't even be able probed. And probed as pure SPI device still out of the scope of "correct use of device property APIs". Because SPI device specific method don't belong to the device property API. I don't really know what's we are missing, but we already intend to let it go, thanks.Quoted 15 lines
Quoted 15 lines
Quoted 15 lines
So, slow down and take your time to get into the code and understand how it works.
Quoted 13 lines
so that the rotation property can not get and
ili9341_dpi_probe()will fails. So in total, this is not a 100% correct use of device property APIs.But I'm fine that if you want to leave(ignore) those less frequent use cases temporarily, there may have programmers want to post patches, to complete the missing in the future.
So, there do have some gains on non-DT cases.
- As you make it be able to compiled on X86 with the drm-misc-defconfig.
- You cleanup the code up (at least patch 2 in this series is no obvious problem).
- You allow people to modprobe it, and maybe half right and half undefined.But you do helps moving something forward, so congratulations for the wake up.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
In reply to Sui JingfengQuoted 8 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
Quoted 8 lines
Simple because the "
ili9341_probe()--->ili9341_dbi_prob()" code path is DT dependent.First of all, the
devm_of_find_backlight()is called inili9341_dbi_probe()under *non-DT* environment,devm_of_find_backlight()is just a just a no-op and will return NULL. NULL is not an error code, soili9341_dbi_probe()won't rage quit. But the several side effect is that the backlight will NOT works at all.
Is it a problem?
Quoted 6 lines
It is actually considered as fatal bug for *panels* if the backlight of it is not light up, at least the brightness of *won't* be able to adjust. What's worse, if there is no sane platform setup code at the firmware or boot loader stage to set a proper initial state. The screen is complete dark. Even though the itself panel is refreshing framebuffers, it can not be seen by human's eye. Simple because of no backlight.
Can you imagine that I may have different hardware that considered this is non-fatal error?
Quoted 4 lines
Second, the
ili9341_dbi_probe()requires additional device properties to be able to works very well on the rotation screen case. See the calling of "device_property_read_u32(dev, "rotation", &rotation)" inili9341_dbi_probe()function.
Yes, exactly, and how does it object the purpose of this patch?
Quoted 4 lines
Combine with those two factors, it is actually can conclude that the panel-ilitek-ili9394 driver has the *implicit* dependency on 'OF'. Removing the 'OF' dependency from its
Kconfigjust trigger the leakage of such risks.
What?!
Quoted 2 lines
My software node related patches can help to reduce part of the potential risks, but it still need some extra work. And it is not landed yet.
Your patch has nothing to do with this series.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Hi,
Quoted 9 lines · Andy Shevchenko
Quoted 7 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Quoted 9 lines
Quoted 8 lines
Simple because the "
ili9341_probe()--->ili9341_dbi_prob()" code path is DT dependent.First of all, the
devm_of_find_backlight()is called inili9341_dbi_probe()under *non-DT* environment,devm_of_find_backlight()is just a just a no-op and will return NULL. NULL is not an error code, soili9341_dbi_probe()won't rage quit. But the several side effect is that the backlight will NOT works at all.Is it a problem?
Yes, it is.
The core problem is that the driver you are modifying has *implicit* *dependency* on DT. The implicit dependency is due to the calling of devm_of_find_backlight(). This function is a no-op under non-DT systems. Therefore, before the devm_of_find_backlight() and the device_get_match_data() function can truly DT independent.
Removing the "OF" dependency just let the tigers run out from the jail.
It is not really meant to targeting at you, but I thinks, all of drm_panel drivers that has the devm_of_find_backlight() invoked will suffer such concerns. In short, the reason is that the *implicit* *dependency* populates and the undefined behavior gets triggered.
I'm sure you know that device_get_match_data() is same with of_device_get_match_data() for DT based systems. For non DT based systems, device_get_match_data() is just *undefined* Note that ACPI is not in the scope of the discussion here, as all of the drm bridges and panels driver under drivers/gpu/drm/ hasn't the ACPI support yet. Therefore, at present, it safe to say that device_get_match_data() is *undefined* under no-DT environment.
Removing the "OF" dependency hints to us that it allows the driver to be probed as a pure SPI device under non DT systems. When device_get_match_data() is called, it returns NULL to us now. As a result, the drm driver being modified will tears down.
See bellow code snippet extracted frompanel-ilitek-ili9341.c:
```
ili->conf = of_device_get_match_data(dev);
if (!ili->conf) {
dev_err(dev, "missing device configuration\n");
return -ENODEV;
}
```Quoted 9 lines
Quoted 6 lines
It is actually considered as fatal bug for *panels* if the backlight of it is not light up, at least the brightness of *won't* be able to adjust. What's worse, if there is no sane platform setup code at the firmware or boot loader stage to set a proper initial state. The screen is complete dark. Even though the itself panel is refreshing framebuffers, it can not be seen by human's eye. Simple because of no backlight.
Can you imagine that I may have different hardware that considered this is non-fatal error?
Yes, I can imagine.
I believe you have the hardware which make you patch correct to run in 99.9% of all cases. But as long as there one bug happened, you patch are going to be blamed.
Because its your patch that open the door, both from the perceptive of practice and from the perceptive of the concept (static analysis).
Quoted 5 lines
Quoted 4 lines
Second, the
ili9341_dbi_probe()requires additional device properties to be able to works very well on the rotation screen case. See the calling of "device_property_read_u32(dev, "rotation", &rotation)" inili9341_dbi_probe()function.Yes, exactly, and how does it object the purpose of this patch?
Because under *non-DT* environment, your commit message do not give a valid description, how does the additional device property can be acquired is not demonstrated.
And it is exactly your patch open the non-DT code path (way or possibility). It isn't has such risks before your patch is applied. In other words, previously, the driver has the 'OF' dependency as the guard, all of the potential risk(or problem) are suppressed. It is a extremely safe policy, and it is also a extremely perfect defend.
And suddenly, you patch release the dangerous tiger from the cage. So I think you can imagine...
Quoted 6 lines
Quoted 4 lines
Combine with those two factors, it is actually can conclude that the panel-ilitek-ili9394 driver has the *implicit* dependency on 'OF'. Removing the 'OF' dependency from its
Kconfigjust trigger the leakage of such risks.What?!
Posting a patch is actually doing the defensive works, such a saying may not sound fair for you, but this is just the hash cruel reality. Sorry for saying that. :(
Quoted 3 lines
Quoted 2 lines
My software node related patches can help to reduce part of the potential risks, but it still need some extra work. And it is not landed yet.
Your patch has nothing to do with this series.
With my patch applied, this is way to meet the gap under non-DT systems. Users of this driver could managed to attach(complete) absent properties to the SPI device with software node properties. Register the swnode properties group into the system prior the panel driver is probed. There may need some quirk. But at the least there has a way to go. When there has a way to go, things become self-consistent. Viewed from both the practice of viewpoint and the concept of viewpoint.
And the dangerous tiger will steer its way to the direction of "ACPI support is missing". But both of will be safe then.
Signature · 2 lines
Best regards, Sui
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 1 line · Sui Jingfeng
But both of will be safe then.
But both of us will be safe then.
Signature · 2 lines
Best regards, Sui
Maxime Ripard
maintainerRe: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
In reply to Sui JingfengHi,
Quoted 7 lines · Sui Jingfeng
Quoted 6 lines · Andy Shevchenko
Quoted 5 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Most of the interactions you had in this series has been uncalled for. You might be against a patch, but there's no need to go to such length.
As far as I'm concerned, this patch is fine to me in itself, and I don't see anything that would prevent us from merging it.
Maxime
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Hi,
Quoted 10 lines · Maxime Ripard
Hi,
Quoted 7 lines · Sui Jingfeng
Quoted 6 lines · Andy Shevchenko
Quoted 5 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Quoted 8 lines
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Most of the interactions you had in this series has been uncalled for.
Right, this paragraph is a little bit of not relevant to the technique point involved. My bad.
Quoted 1 line
You might be against a patch,
I'm not rejecting, I'm actually appreciate the original motivation of this series. Its motivation is good, as it helps to move things forward. And it is definitely a nice cleanup.
Quoted 1 line
but there's no need to go to such length.
Yeah, this is my problem.
Quoted 2 lines
As far as I'm concerned, this patch is fine to me in itself, and I don't see anything that would prevent us from merging it.
And I think you are right, the codes inside the patch is good enough. I would like to respect your decision then.
Quoted 1 line
Maxime
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
In reply to Maxime RipardHi,
Quoted 17 lines · Maxime Ripard
Hi,
Quoted 7 lines · Sui Jingfeng
Quoted 6 lines · Andy Shevchenko
Quoted 5 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Quoted 5 lines
Most of the interactions you had in this series has been uncalled for. You might be against a patch, but there's no need to go to such length.
As far as I'm concerned, this patch is fine to me in itself, and I don't see anything that would prevent us from merging it.
No one is preventing you, as long as don't misunderstanding what other people's technical replies intentionally. I'm just a usual and normal contributor, I hope the world will better than yesterday. Saying such thing to me may not proper, I guess you may want to talk to peoples who has the push rights, just make sure it isn't a insult to the professionalism of drm bridge community itself though.
We still grateful for you help and admire you numerous contribution, thanks.
Signature · 2 lines
Best regards, Sui
Maxime Ripard
maintainerRe: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 24 lines · Sui Jingfeng
Hi,
Quoted 20 lines · Maxime Ripard
Hi,
Quoted 7 lines · Sui Jingfeng
Quoted 6 lines · Andy Shevchenko
Quoted 5 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Most of the interactions you had in this series has been uncalled for. You might be against a patch, but there's no need to go to such length.
Quoted 6 lines
Quoted 2 lines
As far as I'm concerned, this patch is fine to me in itself, and I don't see anything that would prevent us from merging it.
No one is preventing you, as long as don't misunderstanding what other people's technical replies intentionally. I'm just a usual and normal contributor, I hope the world will better than yesterday.
You should seriously consider your tone when replying then.
Quoted 2 lines
Saying such thing to me may not proper, I guess you may want to talk to peoples who has the push rights
I think you misunderstood me. My point was that your several rants were uncalled for and aren't the kind of things we're doing here.
I know very well how to get a patch merged, thanks.
Quoted 2 lines
just make sure it isn't a insult to the professionalism of drm bridge community itself though.
I'm not sure why you're bringing the bridge community or its professionalism. It's a panel, not a bridge, and I never doubted the professionalism of anyone.
Maxime
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Hi,
Quoted 37 lines · Maxime Ripard
Quoted 21 lines · Sui Jingfeng
Hi,
Quoted 17 lines · Maxime Ripard
Hi,
Quoted 14 lines · Sui Jingfeng
Quoted 9 lines · Andy Shevchenko
Quoted 7 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Quoted 8 lines
Quoted 5 lines
Most of the interactions you had in this series has been uncalled for. You might be against a patch, but there's no need to go to such length.
As far as I'm concerned, this patch is fine to me in itself, and I don't see anything that would prevent us from merging it.
No one is preventing you, as long as don't misunderstanding what other people's technical replies intentionally. I'm just a usual and normal contributor, I hope the world will better than yesterday.
You should seriously consider your tone when replying then.
Quoted 2 lines
Saying such thing to me may not proper, I guess you may want to talk to peoples who has the push rights
I think you misunderstood me. My point was that your several rants were uncalled for and aren't the kind of things we're doing here.
Quoted 7 lines
I know very well how to get a patch merged, thanks.
Quoted 2 lines
just make sure it isn't a insult to the professionalism of drm bridge community itself though.
I'm not sure why you're bringing the bridge community or its professionalism. It's a panel, not a bridge, and I never doubted the professionalism of anyone.
I means that the code itself could be adopted, as newer and younger programmer (like Andy) need to be encouraged to contribute. I express no obvious objections, just hints him that something else probably should also be taken into consideration as well.
On the other hand, we probably should allow other people participate in discussion so that it is sufficient discussed and ensure that it won't be reverted by someone in the future for some reasons. Backing to out case happens here, we may need to move things forward. Therefore, it definitely deserve to have a try. It is not a big deal even though it gets reverted someday.
In the end, I don't mind if you think there is nothing that could prevent you from merge it, but I still suggest you have a glance at peoples siting at the Cc list. I'm busy now and I have a lot of other tasks to do, and may not be able to reply you emails on time. So it up to you and other maintainers to decide.
Thank you.
Quoted 1 line
Maxime
Signature · 2 lines
Best regards, Sui
Maxime Ripard
maintainerRe: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 37 lines · Sui Jingfeng
Quoted 36 lines · Maxime Ripard
Quoted 16 lines · Sui Jingfeng
Quoted 15 lines · Maxime Ripard
Quoted 14 lines · Sui Jingfeng
Quoted 9 lines · Andy Shevchenko
Quoted 7 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Quoted 8 lines
Quoted 5 lines
Most of the interactions you had in this series has been uncalled for. You might be against a patch, but there's no need to go to such length.
As far as I'm concerned, this patch is fine to me in itself, and I don't see anything that would prevent us from merging it.
No one is preventing you, as long as don't misunderstanding what other people's technical replies intentionally. I'm just a usual and normal contributor, I hope the world will better than yesterday.
You should seriously consider your tone when replying then.
Quoted 2 lines
Saying such thing to me may not proper, I guess you may want to talk to peoples who has the push rights
I think you misunderstood me. My point was that your several rants were uncalled for and aren't the kind of things we're doing here.
I know very well how to get a patch merged, thanks.
Quoted 2 lines
just make sure it isn't a insult to the professionalism of drm bridge community itself though.
Quoted 7 lines
Quoted 3 lines
I'm not sure why you're bringing the bridge community or its professionalism. It's a panel, not a bridge, and I never doubted the professionalism of anyone.
I means that the code itself could be adopted, as newer and younger programmer (like Andy) need to be encouraged to contribute.
Andy has thousands of commits in Linux. He's *very* far from being a new contributor.
Quoted 2 lines
I express no obvious objections, just hints him that something else probably should also be taken into consideration as well.
That might be what you wanted to express, but you definitely didn't express it that way.
Quoted 7 lines
On the other hand, we probably should allow other people participate in discussion so that it is sufficient discussed and ensure that it won't be reverted by someone in the future for some reasons. Backing to out case happens here, we may need to move things forward. Therefore, it definitely deserve to have a try. It is not a big deal even though it gets reverted someday.
Quoted 6 lines
In the end, I don't mind if you think there is nothing that could prevent you from merge it, but I still suggest you have a glance at peoples siting at the Cc list. I'm busy now and I have a lot of other tasks to do, and may not be able to reply you emails on time. So it up to you and other maintainers to decide.
Thank you.
So far, you're the only one who reviewed those patches. I'm not sure what you're talking about here.
Maxime
Neil Armstrong
maintainerRe: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 69 lines · Maxime Ripard
Quoted 37 lines · Sui Jingfeng
Quoted 36 lines · Maxime Ripard
Quoted 16 lines · Sui Jingfeng
Quoted 15 lines · Maxime Ripard
Quoted 14 lines · Sui Jingfeng
Quoted 9 lines · Andy Shevchenko
Quoted 7 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Quoted 8 lines
Quoted 5 lines
Most of the interactions you had in this series has been uncalled for. You might be against a patch, but there's no need to go to such length.
As far as I'm concerned, this patch is fine to me in itself, and I don't see anything that would prevent us from merging it.
No one is preventing you, as long as don't misunderstanding what other people's technical replies intentionally. I'm just a usual and normal contributor, I hope the world will better than yesterday.
You should seriously consider your tone when replying then.
Quoted 2 lines
Saying such thing to me may not proper, I guess you may want to talk to peoples who has the push rights
I think you misunderstood me. My point was that your several rants were uncalled for and aren't the kind of things we're doing here.
I know very well how to get a patch merged, thanks.
Quoted 2 lines
just make sure it isn't a insult to the professionalism of drm bridge community itself though.
Quoted 7 lines
Quoted 3 lines
I'm not sure why you're bringing the bridge community or its professionalism. It's a panel, not a bridge, and I never doubted the professionalism of anyone.
I means that the code itself could be adopted, as newer and younger programmer (like Andy) need to be encouraged to contribute.
Andy has thousands of commits in Linux. He's *very* far from being a new contributor.
Quoted 2 lines
I express no obvious objections, just hints him that something else probably should also be taken into consideration as well.
That might be what you wanted to express, but you definitely didn't express it that way.
Quoted 7 lines
On the other hand, we probably should allow other people participate in discussion so that it is sufficient discussed and ensure that it won't be reverted by someone in the future for some reasons. Backing to out case happens here, we may need to move things forward. Therefore, it definitely deserve to have a try. It is not a big deal even though it gets reverted someday.
Quoted 6 lines
In the end, I don't mind if you think there is nothing that could prevent you from merge it, but I still suggest you have a glance at peoples siting at the Cc list. I'm busy now and I have a lot of other tasks to do, and may not be able to reply you emails on time. So it up to you and other maintainers to decide.
Thank you.
Quoted 2 lines
So far, you're the only one who reviewed those patches. I'm not sure what you're talking about here.
Well I (as drm-panel maintainer) did review them positively because the patches looked perfectly correct in regards of the commit message and the patchset motivation and because I trust Andy being a long time contributor with a lot of expertise.
Anyway since the rant is finished I'll land the patches.
Neil
Quoted 2 lines
Maxime
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 1 line · Neil Armstrong
On 30/04/2024 11:34, Maxime Ripard wrote:
...
Quoted 1 line
Anyway since the rant is finished I'll land the patches.
Thank you all for the review and discussion!
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
In reply to Neil ArmstrongHi,
Quoted 74 lines · Neil Armstrong
Quoted 69 lines · Maxime Ripard
Quoted 37 lines · Sui Jingfeng
Quoted 36 lines · Maxime Ripard
Quoted 16 lines · Sui Jingfeng
Quoted 15 lines · Maxime Ripard
Quoted 14 lines · Sui Jingfeng
Quoted 9 lines · Andy Shevchenko
Quoted 7 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Quoted 8 lines
Quoted 5 lines
Most of the interactions you had in this series has been uncalled for. You might be against a patch, but there's no need to go to such length.
As far as I'm concerned, this patch is fine to me in itself, and I don't see anything that would prevent us from merging it.
No one is preventing you, as long as don't misunderstanding what other people's technical replies intentionally. I'm just a usual and normal contributor, I hope the world will better than yesterday.
You should seriously consider your tone when replying then.
Quoted 2 lines
Saying such thing to me may not proper, I guess you may want to talk to peoples who has the push rights
I think you misunderstood me. My point was that your several rants were uncalled for and aren't the kind of things we're doing here.
I know very well how to get a patch merged, thanks.
Quoted 2 lines
just make sure it isn't a insult to the professionalism of drm bridge community itself though.
Quoted 7 lines
Quoted 3 lines
I'm not sure why you're bringing the bridge community or its professionalism. It's a panel, not a bridge, and I never doubted the professionalism of anyone.
I means that the code itself could be adopted, as newer and younger programmer (like Andy) need to be encouraged to contribute.
Andy has thousands of commits in Linux. He's *very* far from being a new contributor.
Quoted 2 lines
I express no obvious objections, just hints him that something else probably should also be taken into consideration as well.
That might be what you wanted to express, but you definitely didn't express it that way.
Quoted 7 lines
On the other hand, we probably should allow other people participate in discussion so that it is sufficient discussed and ensure that it won't be reverted by someone in the future for some reasons. Backing to out case happens here, we may need to move things forward. Therefore, it definitely deserve to have a try. It is not a big deal even though it gets reverted someday.
Quoted 6 lines
In the end, I don't mind if you think there is nothing that could prevent you from merge it, but I still suggest you have a glance at peoples siting at the Cc list. I'm busy now and I have a lot of other tasks to do, and may not be able to reply you emails on time. So it up to you and other maintainers to decide.
Thank you.Quoted 2 lines
So far, you're the only one who reviewed those patches. I'm not sure what you're talking about here.
Well I (as drm-panel maintainer) did review them positively
[...]
Quoted 1 line
because the patches looked perfectly correct in regards of the commit message
The point is the 'fixes' tag.
Then, can I ask what's the issue it fixes? I'm asking because I see the submitting-patches.html [1] documentation told us that a fixes tag indicates that the patch fixes an issue in a previous commit.
Previously, the driver only meant to be used on the DT systems, so what's issue?
I copy & paste the paragraph from link [1] for easier to read. See below:
"A Fixes: tag indicates that the patch fixes an issue in a previous commit. It is used to make it easy to determine where a bug originated, which can help review a bug fix. This tag also assists the stable kernel team in determining which stable kernel versions should receive your fix. This is the preferred method for indicating a bug fixed by the patch."
Quoted 1 line
and the patchset motivation and
OK, the motivation is good, I agree and I admit.
Quoted 2 lines
because I trust Andy being a long time contributor with a lot of expertise.
Does this means that you are going to merge patches from the experts without have a glance and reject or ignore novice's patches unconditionally?
I'm asking because I see there still have a lot of other panel drivers use of_device_get_match_data() function to get a match, and most of them has the 'OF' guard. However, in theory, panel should be able to use on any CPU architecture if necessary. Does the remains has the similar issue? or Do we need to fixed them together?
$ find . -name "*.c" -type f | xargs grep "of_device_get_match_data"
./panel-ilitek-ili9882t.c: desc = of_device_get_match_data(&dsi->dev); ./panel-innolux-p079zca.c: desc = of_device_get_match_data(&dsi->dev); ./panel-simple.c: desc = of_device_get_match_data(&pdev->dev); ./panel-simple.c: desc = of_device_get_match_data(&dsi->dev); ./panel-novatek-nt39016.c: panel->panel_info = of_device_get_match_data(dev); ./panel-novatek-nt35950.c: nt->desc = of_device_get_match_data(dev); ./panel-boe-himax8279d.c: desc = of_device_get_match_data(&dsi->dev); ./panel-sitronix-st7703.c: ctx->desc = of_device_get_match_data(dev); ./panel-sony-td4353-jdi.c: ctx->type = (uintptr_t)of_device_get_match_data(dev); ./panel-samsung-sofef00.c: ctx->mode = of_device_get_match_data(dev); ./panel-synaptics-r63353.c: panel->pdata = (struct r63353_desc *)of_device_get_match_data(dev); ./panel-abt-y030xx067a.c: priv->panel_info = of_device_get_match_data(dev); ./panel-ilitek-ili9881c.c: ctx->desc = of_device_get_match_data(&dsi->dev); ./panel-newvision-nv3052c.c: priv->panel_info = of_device_get_match_data(dev); ./panel-mantix-mlaf057we51.c: ctx->default_mode = of_device_get_match_data(dev); ./panel-himax-hx8394.c: ctx->desc = of_device_get_match_data(dev); ./panel-ilitek-ili9805.c: ctx->desc = of_device_get_match_data(&dsi->dev); ./panel-boe-tv101wum-nl6.c: desc = of_device_get_match_data(&dsi->dev); ./panel-samsung-s6d7aa0.c: ctx->desc = of_device_get_match_data(dev); ./panel-novatek-nt36523.c: pinfo->desc = of_device_get_match_data(dev); ./panel-novatek-nt35510.c: nt->conf = of_device_get_match_data(dev); ./panel-newvision-nv3051d.c: ctx->panel_info = of_device_get_match_data(dev); ./panel-khadas-ts050.c: const void *data = of_device_get_match_data(&dsi->dev); ./panel-leadtek-ltk500hd1829.c: ctx->panel_desc = of_device_get_match_data(dev); ./panel-truly-nt35597.c: ctx->config = of_device_get_match_data(dev); ./panel-innolux-ej030na.c: priv->panel_info = of_device_get_match_data(dev); ./panel-magnachip-d53e6ea8966.c: db->panel_info = of_device_get_match_data(dev); ./panel-novatek-nt36672e.c: ctx->desc = of_device_get_match_data(dev); ./panel-sitronix-st7701.c: desc = of_device_get_match_data(&dsi->dev); ./panel-dsi-cm.c: ddata->panel_data = of_device_get_match_data(dev); ./panel-novatek-nt36672a.c: desc = of_device_get_match_data(&dsi->dev); ./panel-novatek-nt35560.c: nt->conf = of_device_get_match_data(dev); ./panel-ilitek-ili9341.c: ili->conf = of_device_get_match_data(dev); ./panel-jadard-jd9365da-h3.c: desc = of_device_get_match_data(dev); ./panel-leadtek-ltk050h3146w.c: ctx->panel_desc = of_device_get_match_data(dev); ./panel-ilitek-ili9322.c: ili->conf = of_device_get_match_data(dev); ./panel-samsung-s6e3ha2.c: ctx->desc = of_device_get_match_data(dev);
Quoted 2 lines
Anyway since the rant is finished I'll land the patches.
It's just *comments* or *remarks*, there really no need to use the 'rant' to insult and/or devalue other peoples, as it make no sense.
Quoted 5 lines
Neil
Quoted 2 lines
Maxime
Signature · 2 lines
Best regards, Sui
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Quoted 10 lines · Sui Jingfeng
Quoted 9 lines · Neil Armstrong
Quoted 8 lines · Maxime Ripard
Quoted 7 lines · Sui Jingfeng
Quoted 6 lines · Maxime Ripard
Quoted 5 lines · Sui Jingfeng
Quoted 4 lines · Maxime Ripard
Quoted 3 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
Quoted 1 line · Sui Jingfeng
On 2024/4/25 22:26, Andy Shevchenko wrote:
...
Quoted 77 lines
Quoted 77 lines
Quoted 73 lines
Quoted 43 lines
Quoted 42 lines
Quoted 22 lines
Quoted 22 lines
Quoted 11 lines
Quoted 10 lines
Quoted 10 lines
Quoted 3 lines
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Quoted 6 lines
Quoted 1 line
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Most of the interactions you had in this series has been uncalled for. You might be against a patch, but there's no need to go to such length.
Quoted 7 lines
Quoted 2 lines
As far as I'm concerned, this patch is fine to me in itself, and I don't see anything that would prevent us from merging it.
No one is preventing you, as long as don't misunderstanding what other people's technical replies intentionally. I'm just a usual and normal contributor, I hope the world will better than yesterday.
You should seriously consider your tone when replying then.
Quoted 2 lines
Saying such thing to me may not proper, I guess you may want to talk to peoples who has the push rights
I think you misunderstood me. My point was that your several rants were uncalled for and aren't the kind of things we're doing here.
I know very well how to get a patch merged, thanks.
Quoted 2 lines
just make sure it isn't a insult to the professionalism of drm bridge community itself though.
Quoted 6 lines
Quoted 3 lines
I'm not sure why you're bringing the bridge community or its professionalism. It's a panel, not a bridge, and I never doubted the professionalism of anyone.
I means that the code itself could be adopted, as newer and younger programmer (like Andy) need to be encouraged to contribute.
Andy has thousands of commits in Linux. He's *very* far from being a new contributor.
Quoted 2 lines
I express no obvious objections, just hints him that something else probably should also be taken into consideration as well.
That might be what you wanted to express, but you definitely didn't express it that way.
Quoted 7 lines
On the other hand, we probably should allow other people participate in discussion so that it is sufficient discussed and ensure that it won't be reverted by someone in the future for some reasons. Backing to out case happens here, we may need to move things forward. Therefore, it definitely deserve to have a try. It is not a big deal even though it gets reverted someday.
Quoted 6 lines
In the end, I don't mind if you think there is nothing that could prevent you from merge it, but I still suggest you have a glance at peoples siting at the Cc list. I'm busy now and I have a lot of other tasks to do, and may not be able to reply you emails on time. So it up to you and other maintainers to decide.
Thank you.Quoted 2 lines
So far, you're the only one who reviewed those patches. I'm not sure what you're talking about here.
Well I (as drm-panel maintainer) did review them positively
[...]
Quoted 10 lines
Quoted 2 lines
because the patches looked perfectly correct in regards of the commit message
The point is the 'fixes' tag.
Then, can I ask what's the issue it fixes? I'm asking because I see the submitting-patches.html [1] documentation told us that a fixes tag indicates that the patch fixes an issue in a previous commit.
Previously, the driver only meant to be used on the DT systems, so what's issue?
It fixes copy'n'paste error as far as I understand the motivation of this code.
Quoted 20 lines
I copy & paste the paragraph from link [1] for easier to read. See below:
"A Fixes: tag indicates that the patch fixes an issue in a previous commit. It is used to make it easy to determine where a bug originated, which can help review a bug fix. This tag also assists the stable kernel team in determining which stable kernel versions should receive your fix. This is the preferred method for indicating a bug fixed by the patch."
Quoted 1 line
and the patchset motivation and
OK, the motivation is good, I agree and I admit.
Quoted 2 lines
because I trust Andy being a long time contributor with a lot of expertise.
Does this means that you are going to merge patches from the experts without have a glance and reject or ignore novice's patches unconditionally?
Quoted 6 lines
I'm asking because I see there still have a lot of other panel drivers use of_device_get_match_data() function to get a match, and most of them has the 'OF' guard. However, in theory, panel should be able to use on any CPU architecture if necessary. Does the remains has the similar issue? or Do we need to fixed them together?
$ find . -name "*.c" -type f | xargs grep "of_device_get_match_data"
$ git log --oneline --no-merges --grep device_get_match_data --author="Rob Herring"
So what does this prove?
Quoted 4 lines
Quoted 1 line
Anyway since the rant is finished I'll land the patches.
It's just *comments* or *remarks*, there really no need to use the 'rant' to insult and/or devalue other peoples, as it make no sense.
P.S.
You really need to study a kernel code a bit more before replying with long messages. It will help everybody, I believe.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
In reply to Sui JingfengQuoted 6 lines · Sui Jingfeng
Quoted 5 lines · Andy Shevchenko
Quoted 4 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
To add here, "seems" is used to show that I have no knowledge on what was the idea behind this implementation by the original author. Plus my knowledge in the firmware node / device property APIs and use cases in Linux kernel.
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Okay.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Simple because the "
ili9341_probe()--->ili9341_dbi_prob()" code path is DT dependent.First of all, the
devm_of_find_backlight()is called inili9341_dbi_probe()under *non-DT* environment,devm_of_find_backlight()is just a just a no-op and will return NULL. NULL is not an error code, soili9341_dbi_probe()won't rage quit. But the several side effect is that the backlight will NOT works at all.
Quoted 7 lines
Quoted 1 line
Is it a problem?
Yes, it is.
The core problem is that the driver you are modifying has *implicit* *dependency* on DT. The implicit dependency is due to the calling of
devm_of_find_backlight(). This function is a no-op under non-DT systems.
Okay.
Quoted 2 lines
Therefore, before the
devm_of_find_backlight()and thedevice_get_match_data()function can truly DT independent.
True for the first part, not true for the second.
Quoted 6 lines
Removing the "OF" dependency just let the tigers run out from the jail.
It is not really meant to targeting at you, but I thinks, all of
drm_paneldrivers that has thedevm_of_find_backlight()invoked will suffer such concerns. In short, the reason is that the *implicit* *dependency* populates and the undefined behavior gets triggered.
Still no problem statement. My hardware works nicely on non-DT environment. (And since it's Arduino-based one, I assume it will work on DT environments
the very same way.)
Quoted 4 lines
I'm sure you know that
device_get_match_data()is same withof_device_get_match_data()for DT based systems. For non DT based systems,device_get_match_data()is just *undefined* Note that ACPI is not in the scope of the discussion here, as all of the drm bridges and panels driver underdrivers/gpu/drm/hasn't the ACPI support yet.
This patch shows exactly how to bring back the ACPI support to one of them (as it's done for tinyDRM cases).
Quoted 2 lines
Therefore, at present,
it safe to say thatdevice_get_match_data()is *undefined* under no-DT environment.
This is not true.
Quoted 43 lines
Removing the "OF" dependency hints to us that it allows the driver to be probed as a pure SPI device under non DT systems. When
device_get_match_data()is called, it returns NULL to us now. As a result, the drm driver being modified will tears down.See bellow code snippet extracted
frompanel-ilitek-ili9341.c:``` ili->conf = of_device_get_match_data(dev); if (!ili->conf) { dev_err(dev, "missing device configuration\n"); return -ENODEV; } ```Quoted 9 lines
Quoted 6 lines
It is actually considered as fatal bug for *panels* if the backlight of it is not light up, at least the brightness of *won't* be able to adjust. What's worse, if there is no sane platform setup code at the firmware or boot loader stage to set a proper initial state. The screen is complete dark. Even though the itself panel is refreshing framebuffers, it can not be seen by human's eye. Simple because of no backlight.
Can you imagine that I may have different hardware that considered this is non-fatal error?
Yes, I can imagine.
I believe you have the hardware which make you patch correct to run in 99.9% of all cases. But as long as there one bug happened, you patch are going to be blamed.
Because its your patch that open the door, both from the perceptive of practice and from the perceptive of the concept (static analysis).
Quoted 5 lines
Quoted 4 lines
Second, the
ili9341_dbi_probe()requires additional device properties to be able to works very well on the rotation screen case. See the calling of "device_property_read_u32(dev, "rotation", &rotation)" inili9341_dbi_probe()function.Yes, exactly, and how does it object the purpose of this patch?
Because under *non-DT* environment, your commit message do not give a valid description, how does the additional device property can be acquired is not demonstrated.
Quoted 8 lines
And it is exactly your patch open the non-DT code path (way or possibility). It isn't has such risks before your patch is applied. In other words, previously, the driver has the 'OF' dependency as the guard, all of the potential risk(or problem) are suppressed. It is a extremely safe policy, and it is also a extremely perfect defend.
And suddenly, you patch release the dangerous tiger from the cage. So I think you can imagine...
No, I can't, sorry. I don't see how dangerous will be the use of DRM panel in a wrong configuration. The same can very well happen on improperly working hardware (backlight part) or simply when somebody didn't correctly set a DT or manually use it when it should not be. But again I see *no* problem statement, only some worries.
And on top of that I made tinyDRM drivers to be accessible on ACPI platforms and so far I have none complains about the tigers that left the cage.
Quoted 9 lines
Quoted 6 lines
Quoted 4 lines
Combine with those two factors, it is actually can conclude that the panel-ilitek-ili9394 driver has the *implicit* dependency on 'OF'. Removing the 'OF' dependency from its
Kconfigjust trigger the leakage of such risks.What?!
Posting a patch is actually doing the defensive works, such a saying may not sound fair for you, but this is just the hash cruel reality. Sorry for saying that. :(
So, the summary of your message is that:
- there's no understanding how ACPI (or any other non-DT fwnode based environment) can utilise the driver
- there's a worry about some problems which can't be stated clearly
- there's a neglecting of the previous successful cases specific for DRM (tinyDRM drivers)
As a result of the false input, the non-constructive conclusion was given.
And note, I converted dozens if not hundredth of drivers that used to be OF-only and haven't heart any negative feedback before this case. Maybe we (reviewers of my patches and maintainers who applied them and end users) miss a BIG DEAL here? Please, elaborate how dropping OF dependency can be dangerous as a free walking tiger.
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
My software node related patches can help to reduce part of the potential risks, but it still need some extra work. And it is not landed yet.
Your patch has nothing to do with this series.
I am not going to repeat the above.
Quoted 10 lines
With my patch applied, this is way to meet the gap under non-DT systems. Users of this driver could managed to attach(complete) absent properties to the SPI device with software node properties. Register the swnode properties group into the system prior the panel driver is probed. There may need some quirk. But at the least there has a way to go. When there has a way to go, things become self-consistent. Viewed from both the practice of viewpoint and the concept of viewpoint.
And the dangerous tiger will steer its way to the direction of "ACPI support is missing". But both of will be safe then.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [v1,1/3] drm/panel: ili9341: Correct use of device property APIs
Hi,
Quoted 144 lines · Andy Shevchenko
Quoted 6 lines · Sui Jingfeng
Quoted 5 lines · Andy Shevchenko
Quoted 4 lines · Sui Jingfeng
Quoted 2 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
You are using the 'seems' here exactly saying that you are not 100% sure.
To add here, "seems" is used to show that I have no knowledge on what was the idea behind this implementation by the original author. Plus my knowledge in the firmware node / device property APIs and use cases in Linux kernel.
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Please allow me to tell you the truth: This patch again has ZERO effect. It fix nothing. And this patch is has the risks to be wrong.
Huh?! Really, stop commenting the stuff you do not understand.
I'm actually a professional display drivers developer at the downstream in the past, despite my contribution to upstream is less. But I believe that all panel driver developers know what I'm talking about. So please have take a look at my replies.
Okay.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Simple because the "
ili9341_probe()--->ili9341_dbi_prob()" code path is DT dependent.First of all, the
devm_of_find_backlight()is called inili9341_dbi_probe()under *non-DT* environment,devm_of_find_backlight()is just a just a no-op and will return NULL. NULL is not an error code, soili9341_dbi_probe()won't rage quit. But the several side effect is that the backlight will NOT works at all.Quoted 6 lines
Quoted 1 line
Is it a problem?
Yes, it is.
The core problem is that the driver you are modifying has *implicit* *dependency* on DT. The implicit dependency is due to the calling of
devm_of_find_backlight(). This function is a no-op under non-DT systems.Okay.
Quoted 2 lines
Therefore, before the
devm_of_find_backlight()and thedevice_get_match_data()function can truly DT independent.True for the first part, not true for the second.
Quoted 6 lines
Removing the "OF" dependency just let the tigers run out from the jail.
It is not really meant to targeting at you, but I thinks, all of
drm_paneldrivers that has thedevm_of_find_backlight()invoked will suffer such concerns. In short, the reason is that the *implicit* *dependency* populates and the undefined behavior gets triggered.Still no problem statement. My hardware works nicely on non-DT environment. (And since it's Arduino-based one, I assume it will work on DT environments
the very same way.)Quoted 4 lines
I'm sure you know that
device_get_match_data()is same withof_device_get_match_data()for DT based systems. For non DT based systems,device_get_match_data()is just *undefined* Note that ACPI is not in the scope of the discussion here, as all of the drm bridges and panels driver underdrivers/gpu/drm/hasn't the ACPI support yet.This patch shows exactly how to bring back the ACPI support to one of them (as it's done for tinyDRM cases).
Quoted 2 lines
Therefore, at present,
it safe to say thatdevice_get_match_data()is *undefined* under no-DT environment.This is not true.
Quoted 42 lines
Removing the "OF" dependency hints to us that it allows the driver to be probed as a pure SPI device under non DT systems. When
device_get_match_data()is called, it returns NULL to us now. As a result, the drm driver being modified will tears down.See bellow code snippet extracted
frompanel-ilitek-ili9341.c:``` ili->conf = of_device_get_match_data(dev); if (!ili->conf) { dev_err(dev, "missing device configuration\n"); return -ENODEV; } ```Quoted 9 lines
Quoted 6 lines
It is actually considered as fatal bug for *panels* if the backlight of it is not light up, at least the brightness of *won't* be able to adjust. What's worse, if there is no sane platform setup code at the firmware or boot loader stage to set a proper initial state. The screen is complete dark. Even though the itself panel is refreshing framebuffers, it can not be seen by human's eye. Simple because of no backlight.
Can you imagine that I may have different hardware that considered this is non-fatal error?
Yes, I can imagine.
I believe you have the hardware which make you patch correct to run in 99.9% of all cases. But as long as there one bug happened, you patch are going to be blamed.
Because its your patch that open the door, both from the perceptive of practice and from the perceptive of the concept (static analysis).
Quoted 5 lines
Quoted 4 lines
Second, the
ili9341_dbi_probe()requires additional device properties to be able to works very well on the rotation screen case. See the calling of "device_property_read_u32(dev, "rotation", &rotation)" inili9341_dbi_probe()function.Yes, exactly, and how does it object the purpose of this patch?
Because under *non-DT* environment, your commit message do not give a valid description, how does the additional device property can be acquired is not demonstrated.
Quoted 8 lines
And it is exactly your patch open the non-DT code path (way or possibility). It isn't has such risks before your patch is applied. In other words, previously, the driver has the 'OF' dependency as the guard, all of the potential risk(or problem) are suppressed. It is a extremely safe policy, and it is also a extremely perfect defend.
And suddenly, you patch release the dangerous tiger from the cage. So I think you can imagine...
No, I can't, sorry. I don't see how dangerous will be the use of DRM panel in a wrong configuration. The same can very well happen on improperly working hardware (backlight part) or simply when somebody didn't correctly set a DT or manually use it when it should not be. But again I see *no* problem statement, only some worries.
And on top of that I made tinyDRM drivers to be accessible on ACPI platforms and so far I have none complains about the tigers that left the cage.
Quoted 9 lines
Quoted 6 lines
Quoted 4 lines
Combine with those two factors, it is actually can conclude that the panel-ilitek-ili9394 driver has the *implicit* dependency on 'OF'. Removing the 'OF' dependency from its
Kconfigjust trigger the leakage of such risks.What?!
Posting a patch is actually doing the defensive works, such a saying may not sound fair for you, but this is just the hash cruel reality. Sorry for saying that. :(
So, the summary of your message is that:
- there's no understanding how ACPI (or any other non-DT fwnode based environment) can utilise the driver
- there's a worry about some problems which can't be stated clearly
- there's a neglecting of the previous successful cases specific for DRM (tinyDRM drivers)As a result of the false input, the non-constructive conclusion was given.
And note, I converted dozens if not hundredth of drivers that used to be OF-only and haven't heart any negative feedback before this case. Maybe we (reviewers of my patches and maintainers who applied them and end users) miss a BIG DEAL here? Please, elaborate how dropping OF dependency can be dangerous as a free walking tiger.
Quoted 15 lines
Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
My software node related patches can help to reduce part of the potential risks, but it still need some extra work. And it is not landed yet.
Your patch has nothing to do with this series.
I am not going to repeat the above.
Quoted 10 lines
With my patch applied, this is way to meet the gap under non-DT systems. Users of this driver could managed to attach(complete) absent properties to the SPI device with software node properties. Register the swnode properties group into the system prior the panel driver is probed. There may need some quirk. But at the least there has a way to go. When there has a way to go, things become self-consistent. Viewed from both the practice of viewpoint and the concept of viewpoint.
And the dangerous tiger will steer its way to the direction of "ACPI support is missing". But both of will be safe then.
I have no obvious opinions then, code inside this patch seems no obvious problem for majority applications. Sorry about the noise and thanks for reply.
Signature · 2 lines
Best regards, Sui
Re: [PATCH v1 1/3] drm/panel: ili9341: Correct use of device property APIs
In reply to Andy ShevchenkoQuoted 10 lines · Andy Shevchenko
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively.
Fixes 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")Signed-off-by Andy Shevchenko <[email protected]>--- drivers/gpu/drm/panel/Kconfig | 2 +- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-)
Signature · 2 lines
With best wishes Dmitry
PATCH 2/3 drm/panel: ili9341: Respect deferred probe
In reply to Andy ShevchenkoGPIO controller might not be available when driver is being probed. There are plenty of reasons why, one of which is deferred probe.
Since GPIOs are optional, return any error code we got to the upper layer, including deferred probe. With that in mind, use dev_err_probe() in order to avoid spamming the logs.
--- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/panel/panel-ilitek-ili9341.c +2 -2
@@ -715,11 +715,11 @@ static int ili9341_probe(struct spi_device *spi) reset =devm_gpiod_get_optional (dev,"reset" ,GPIOD_OUT_HIGH );if (IS_ERR (reset)) -dev_err (dev,"Failed to get gpio 'reset'\n" ); +return dev_err_probe (dev,PTR_ERR (reset),"Failed to get gpio 'reset'\n" ); dc =devm_gpiod_get_optional (dev,"dc" ,GPIOD_OUT_LOW );if (IS_ERR (dc)) -dev_err (dev,"Failed to get gpio 'dc'\n" ); +return dev_err_probe (dev,PTR_ERR (dc),"Failed to get gpio 'dc'\n" );if (!strcmp (id->name,"sf-tc240t-9370-t" ))return ili9341_dpi_probe (spi, dc, reset);
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
Re: [PATCH v1 2/3] drm/panel: ili9341: Respect deferred probe
Quoted 21 lines · Andy Shevchenko
GPIO controller might not be available when driver is being probed. There are plenty of reasons why, one of which is deferred probe.
Since GPIOs are optional, return any error code we got to the upper layer, including deferred probe. With that in mind, use
dev_err_probe()in order to avoid spamming the logs.Fixes 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")Signed-off-by Andy Shevchenko <[email protected]>--- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/gpu/drm/panel/panel-ilitek-ili9341.c +0
-0@@ -715,11 +715,11 @@ static int ili9341_probe(struct spi_device *spi) reset =devm_gpiod_get_optional (dev,"reset" ,GPIOD_OUT_HIGH );if (IS_ERR (reset))
drivers/gpu/drm/panel/panel-ilitek-ili9341.c static int ili9341_probe(struct spi_device *spi) · line 725
Quoted 10 lines
drivers/gpu/drm/panel/panel-ilitek-ili9341.c +2
-2-dev_err (dev,"Failed to get gpio 'reset'\n" ); +return dev_err_probe (dev,PTR_ERR (reset),"Failed to get gpio 'reset'\n" ); dc =devm_gpiod_get_optional (dev,"dc" ,GPIOD_OUT_LOW );if (IS_ERR (dc)) -dev_err (dev,"Failed to get gpio 'dc'\n" ); +return dev_err_probe (dev,PTR_ERR (dc),"Failed to get gpio 'dc'\n" );if (!strcmp (id->name,"sf-tc240t-9370-t" ))return ili9341_dpi_probe (spi, dc, reset);
Re: [PATCH v1 2/3] drm/panel: ili9341: Respect deferred probe
In reply to Andy ShevchenkoQuoted 7 lines · Andy Shevchenko
GPIO controller might not be available when driver is being probed. There are plenty of reasons why, one of which is deferred probe.
Since GPIOs are optional, return any error code we got to the upper layer, including deferred probe. With that in mind, use
dev_err_probe()in order to avoid spamming the logs.
Quoted 5 lines
Fixes 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")Signed-off-by Andy Shevchenko <[email protected]>--- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Signature · 2 lines
With best wishes Dmitry
Re: [v1,2/3] drm/panel: ili9341: Respect deferred probe
In reply to Andy ShevchenkoHi,
Quoted 10 lines · Andy Shevchenko
GPIO controller might not be available when driver is being probed. There are plenty of reasons why, one of which is deferred probe.
Since GPIOs are optional, return any error code we got to the upper layer, including deferred probe. With that in mind, use
dev_err_probe()in order to avoid spamming the logs.Fixes 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")Signed-off-by Andy Shevchenko <[email protected]>Reviewed-by Neil Armstrong <[email protected]>
Signature · 2 lines
Best regards, Sui
PATCH 3/3 drm/panel: ili9341: Use predefined error codes
In reply to Andy ShevchenkoIn one case the -1 is returned which is quite confusing code for the wrong device ID, in another the ret is returning instead of plain 0 that also confusing as readed may ask the possible meaning of positive codes, which are never the case there. Convert both to use explicit predefined error codes to make it clear what's going on there.
--- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/panel/panel-ilitek-ili9341.c +2 -2
@@ -422,7 +422,7 @@ static int ili9341_dpi_prepare(struct drm_panel *panel)ili9341_dpi_init (ili); -return ret; +return 0 ; }static int ili9341_dpi_enable (struct drm_panel *panel)
@@ -726,7 +726,7 @@ static int ili9341_probe(struct spi_device *spi)else if (!strcmp (id->name,"yx240qv29" ))return ili9341_dbi_probe (spi, dc, reset); -return -1 ; +return -ENODEV ; }static void ili9341_remove (struct spi_device *spi)
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
Re: [PATCH v1 3/3] drm/panel: ili9341: Use predefined error codes
Quoted 27 lines · Andy Shevchenko
In one case the -1 is returned which is quite confusing code for the wrong device ID, in another the ret is returning instead of plain 0 that also confusing as readed may ask the possible meaning of positive codes, which are never the case there. Convert both to use explicit predefined error codes to make it clear what's going on there.
Fixes 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")Signed-off-by Andy Shevchenko <[email protected]>--- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/gpu/drm/panel/panel-ilitek-ili9341.c +1
-1@@ -422,7 +422,7 @@ static int ili9341_dpi_prepare(struct drm_panel *panel)ili9341_dpi_init (ili); -return ret; +return 0 ; }static int ili9341_dpi_enable (struct drm_panel *panel)
drivers/gpu/drm/panel/panel-ilitek-ili9341.c static int ili9341_probe(struct spi_device *spi) · line 732
Quoted 8 lines
drivers/gpu/drm/panel/panel-ilitek-ili9341.c +1
-1@@ -726,7 +726,7 @@ static int ili9341_probe(struct spi_device *spi)else if (!strcmp (id->name,"yx240qv29" ))return ili9341_dbi_probe (spi, dc, reset); -return -1 ; +return -ENODEV ; }static void ili9341_remove (struct spi_device *spi)
Re: [v1,3/3] drm/panel: ili9341: Use predefined error codes
In reply to Andy ShevchenkoQuoted 10 lines · Andy Shevchenko
In one case the -1 is returned which is quite confusing code for the wrong device ID, in another the ret is returning instead of plain 0 that also confusing as readed may ask the possible meaning of positive codes, which are never the case there. Convert both to use explicit predefined error codes to make it clear what's going on there.
Fixes 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")Signed-off-by Andy Shevchenko <[email protected]>Reviewed-by Neil Armstrong <[email protected]>
Signature · 2 lines
Best regards, Sui
Quoted 1 line · Andy Shevchenko
A few obvious fixes to the driver.
Note, despite the desire of removal Adafruit support from this driver, the older (read: stable) kernels will need this.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Hi,
Quoted 8 lines · Andy Shevchenko
A few obvious fixes to the driver.
Andy Shevchenko (3):
drm/panel: ili9341: Correct use of device property APIs drm/panel: ili9341: Respect deferred probe drm/panel: ili9341: Use predefined error codes[...]
Thanks, Applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-fixes)
[1/3] drm/panel: ili9341: Correct use of device property APIs
https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/d43cd48ef1791801c61a54fade4a88d294dedf77 [2/3] drm/panel: ili9341: Respect deferred probe https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/740fc1e0509be3f7e2207e89125b06119ed62943 [3/3] drm/panel: ili9341: Use predefined error codes https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/da85f0aaa9f21999753b01d45c0343f885a8f905
Signature · 1 line
Neil
Quoted 12 lines · Neil Armstrong
Hi,
Quoted 8 lines · Andy Shevchenko
A few obvious fixes to the driver.
Andy Shevchenko (3):
drm/panel: ili9341: Correct use of device property APIs drm/panel: ili9341: Respect deferred probe drm/panel: ili9341: Use predefined error codes[...]
Quoted 8 lines
Thanks, Applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-fixes)
[1/3] drm/panel: ili9341: Correct use of device property APIs
https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/d43cd48ef1791801c61a54fade4a88d294dedf77 [2/3] drm/panel: ili9341: Respect deferred probe https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/740fc1e0509be3f7e2207e89125b06119ed62943 [3/3] drm/panel: ili9341: Use predefined error codes https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/da85f0aaa9f21999753b01d45c0343f885a8f905
Thank you, Neil, appreciated!
Signature · 2 lines
With Best Regards, Andy Shevchenko