soc: qcom: pmic_glink: disable UCSI on sc8280xp
Subsystems (3)
PATCH 1/1 soc: qcom: pmic_glink: disable UCSI on sc8280xp
Disconnecting an external display triggers a hypervisor reset on the Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again until the regression has been fixed properly.
--- drivers/soc/qcom/pmic_glink.c | 4 ++++ 1 file changed, 4 insertions(+)
Dmitry reported off-list that his X13s was crashing when he disconnected an external display and I tracked it down to the enablement of UCSI in 6.10-rc1.
I have not had time to debug this further, but I'm flagging this as a regression and sending an effective so that we have a fall back in case this is not fixed in timely manner.
Note that this likely affects other Qualcomm SoCs as well.
Johan
#regzbot introduced: 3f91a0bf4a0b
drivers/soc/qcom/pmic_glink.c +4 -0
@@ -348,11 +348,15 @@ static void pmic_glink_remove(struct platform_device *pdev)mutex_unlock (&__pmic_glink_lock); } +static const unsigned long pmic_glink_sc8280xp_client_mask =BIT (PMIC_GLINK_CLIENT_BATT ) | +BIT (PMIC_GLINK_CLIENT_ALTMODE ); +static const unsigned long pmic_glink_sm8450_client_mask =BIT (PMIC_GLINK_CLIENT_BATT ) |BIT (PMIC_GLINK_CLIENT_ALTMODE ) |BIT (PMIC_GLINK_CLIENT_UCSI );static const struct of_device_id pmic_glink_of_match[] = { + { .compatible ="qcom,sc8280xp-pmic-glink" , .data = &pmic_glink_sc8280xp_client_mask }, { .compatible ="qcom,pmic-glink" , .data = &pmic_glink_sm8450_client_mask }, {} };
Signature · 1 line
2.44.1
Quoted 7 lines · Johan Hovold
Disconnecting an external display triggers a hypervisor reset on the Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again until the regression has been fixed properly.
Fixes 3f91a0bf4a0b ("soc: qcom: pmic_glink: reenable UCSI on sc8280xp")Cc Dmitry Baryshkov <[email protected]>Signed-off-by Johan Hovold <[email protected]>
Quoted 44 lines
--- drivers/soc/qcom/pmic_glink.c | 4 ++++ 1 file changed, 4 insertions(+)Dmitry reported off-list that his X13s was crashing when he disconnected an external display and I tracked it down to the enablement of UCSI in 6.10-rc1.
I have not had time to debug this further, but I'm flagging this as a regression and sending an effective so that we have a fall back in case this is not fixed in timely manner.
Note that this likely affects other Qualcomm SoCs as well.
Johan
#regzbot introduced:
3f91a0bf4a0bdrivers/soc/qcom/pmic_glink.c +4
-0@@ -348,11 +348,15 @@ static void pmic_glink_remove(struct platform_device *pdev)mutex_unlock (&__pmic_glink_lock); } +static const unsigned long pmic_glink_sc8280xp_client_mask =BIT (PMIC_GLINK_CLIENT_BATT ) | +BIT (PMIC_GLINK_CLIENT_ALTMODE ); +static const unsigned long pmic_glink_sm8450_client_mask =BIT (PMIC_GLINK_CLIENT_BATT ) |BIT (PMIC_GLINK_CLIENT_ALTMODE ) |BIT (PMIC_GLINK_CLIENT_UCSI );static const struct of_device_id pmic_glink_of_match[] = { + { .compatible ="qcom,sc8280xp-pmic-glink" , .data = &pmic_glink_sc8280xp_client_mask }, { .compatible ="qcom,pmic-glink" , .data = &pmic_glink_sm8450_client_mask }, {} };Signature · 1 line
2.44.1
Signature · 1 line
heikki
Quoted 5 lines · Johan Hovold
Disconnecting an external display triggers a hypervisor reset on the Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again until the regression has been fixed properly.
Applied, thanks!
[1/1] soc: qcom: pmic_glink: disable UCSI on sc8280xp
commit: ad3dd9592b2a1d2f9e6ffeedfd81602f91f1ba09
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>
[ Trimming CC list ]
Hi Thorsten,
Quoted 20 lines · Johan Hovold
Disconnecting an external display triggers a hypervisor reset on the Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again until the regression has been fixed properly.
Fixes 3f91a0bf4a0b ("soc: qcom: pmic_glink: reenable UCSI on sc8280xp")Cc Dmitry Baryshkov <[email protected]>Signed-off-by Johan Hovold <[email protected]>--- drivers/soc/qcom/pmic_glink.c | 4 ++++ 1 file changed, 4 insertions(+)Dmitry reported off-list that his X13s was crashing when he disconnected an external display and I tracked it down to the enablement of UCSI in 6.10-rc1.
I have not had time to debug this further, but I'm flagging this as a regression and sending an effective so that we have a fall back in case this is not fixed in timely manner.
Quoted 6 lines
Note that this likely affects other Qualcomm SoCs as well.
Johan
#regzbot introduced:
3f91a0bf4a0b
I noticed that this one did not make into the regression tracker. This may be related to the fact that this is the second time I'm disabling UCSI on sc8280xp and apparently I used the same patch Subject last time so they end up in the same thread on lore:
https://lore.kernel.org/lkml/[email protected]/
Bjorn has picked up this effective revert for 6.10 now, but I still figured I'd mentioned this to you in case you want to add it to the tracker and/or see what can be done to your scripts to avoid having regressions like this fall through the cracks in the future.
Johan
[ Trying again: ]
#regzbot introduced: 3f91a0bf4a0b
Quoted 7 lines · Johan Hovold
[ Trimming CC list ]
Quoted 3 lines · Johan Hovold
Disconnecting an external display triggers a hypervisor reset on the Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again until the regression has been fixed properly.
I noticed
First off: many thx for telling me about the problem!
Quoted 1 line
that this one did not make into the regression tracker.
FWIW, it did:
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
Quoted 5 lines
This
may be related to the fact that this is the second time I'm disabling UCSI on sc8280xp and apparently I used the same patch Subject last time so they end up in the same thread on lore:https://lore.kernel.org/lkml/[email protected]/
Kinda. The thread is not the problem. I told regzbot about the subject for the fix a few days ago and it then dutifully looked up if a commit with that subject ended up in next or mainline already. Which normally is the right thing to do -- but in this case it went sideways for obvious reasons. :-/ Not sure yet how to handle that better; maybe that falls into the ugly category called "there are bigger fish to fry, ignore this corner case for now".
Again, thx for telling me about this!
Ciao, Thorsten
Quoted 17 lines · Linux regression tracking (Thorsten Leemhuis)
Quoted 5 lines · Johan Hovold
On Sat, Jun 08, 2024 at 01:45:29PM +0200, Johan Hovold wrote:
I noticed
that this one did not make into the regression tracker.
FWIW, it did:
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
Quoted 5 lines
This
may be related to the fact that this is the second time I'm disabling UCSI on sc8280xp and apparently I used the same patch Subject last time so they end up in the same thread on lore:https://lore.kernel.org/lkml/[email protected]/
Quoted 7 lines
Kinda. The thread is not the problem. I told regzbot about the subject for the fix a few days ago and it then dutifully looked up if a commit with that subject ended up in next or mainline already. Which normally is the right thing to do -- but in this case it went sideways for obvious reasons. :-/ Not sure yet how to handle that better; maybe that falls into the ugly category called "there are bigger fish to fry, ignore this corner case for now".
Fair enough. At least it's a known issue then.
Johan