Skip to contentSkip to conversation

mfd: stm32-timers: Make register definition more flexible

PATCH In review Uwe Kleine-König 3 participants 18 messages Jun 19, 2024 – Jul 3, 2024

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v2 cover mfd: stm32-timers: Make register definition more flexible

Hello,

(implicit) v1 is available at
https://lore.kernel.org/lkml/[email protected]
.

Changes introduced here:

- Split the patch removing TIM_DIER_CC_IE() and use appropriate subject prefixes. Lee and William didn't like the patch touching both include/linux/mfd/stm32-timers.h and drivers/counter/stm32-timer-cnt.c not having a hint to the counter subsystem (at least that's my interpretation of their feedback). Not mentioning mfd didn't seem to be considerably better in my eyes, so I split this patch.
- Fix typo noticed by Thorsten.
- Update subject prefix of the last patch to match what is usually done for pwm.

I have some further updates to the pwm-stm32 driver that will probably go in before v6.10-rc1. They shouldn't conflict, still I'd prefer to let the pwm patch go in via my tree as I might have some further changes for that driver. So if this is merged using the mfd or counter tree, please skip the pwm patch. A stable branch would be welcome in this case.

Best regards
Uwe

Uwe Kleine-König (5):
mfd: stm32-timers: Unify alignment of register definition
mfd: stm32-timers: Add some register definitions with a parameter
counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of
TIM_DIER_CCxIE(x)
mfd: stm32-timers: Drop unused TIM_DIER_CC_IE
pwm: stm32: Make use of parametrised register definitions

 drivers/counter/stm32-timer-cnt.c |   4 +-
 drivers/pwm/pwm-stm32.c           |  22 ++--
 include/linux/mfd/stm32-timers.h  | 179 ++++++++++++++++--------------
 3 files changed, 107 insertions(+), 98 deletions(-)

base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0

Signature · 1 line
2.43.0
#1 lore raw

PATCH v2 1/5 mfd: stm32-timers: Unify alignment of register definition

Use tabs consistently for indention and properly align register names, values and comments. This improves readability (at least for my eyes).

---
 include/linux/mfd/stm32-timers.h | 170 +++++++++++++++----------------
 1 file changed, 85 insertions(+), 85 deletions(-)
include/linux/mfd/stm32-timers.h +85 -85
index 9eb17481b07f..5794110b2b28 100644
@@ -12,97 +12,97 @@
 #include <linux/dma-mapping.h>
 #include <linux/regmap.h>
 
-#define TIM_CR1		0x00	/* Control Register 1      */
-#define TIM_CR2		0x04	/* Control Register 2      */
-#define TIM_SMCR	0x08	/* Slave mode control reg  */
-#define TIM_DIER	0x0C	/* DMA/interrupt register  */
-#define TIM_SR		0x10	/* Status register	   */
-#define TIM_EGR		0x14	/* Event Generation Reg    */
-#define TIM_CCMR1	0x18	/* Capt/Comp 1 Mode Reg    */
-#define TIM_CCMR2	0x1C	/* Capt/Comp 2 Mode Reg    */
-#define TIM_CCER	0x20	/* Capt/Comp Enable Reg    */
-#define TIM_CNT		0x24	/* Counter		   */
-#define TIM_PSC		0x28	/* Prescaler               */
-#define TIM_ARR		0x2c	/* Auto-Reload Register    */
-#define TIM_CCR1	0x34	/* Capt/Comp Register 1    */
-#define TIM_CCR2	0x38	/* Capt/Comp Register 2    */
-#define TIM_CCR3	0x3C	/* Capt/Comp Register 3    */
-#define TIM_CCR4	0x40	/* Capt/Comp Register 4    */
-#define TIM_BDTR	0x44	/* Break and Dead-Time Reg */
-#define TIM_DCR		0x48	/* DMA control register    */
-#define TIM_DMAR	0x4C	/* DMA register for transfer */
-#define TIM_TISEL	0x68	/* Input Selection         */
+#define TIM_CR1		0x00			/* Control Register 1			*/
+#define TIM_CR2		0x04			/* Control Register 2			*/
+#define TIM_SMCR	0x08			/* Slave mode control reg		*/
+#define TIM_DIER	0x0C			/* DMA/interrupt register		*/
+#define TIM_SR		0x10			/* Status register			*/
+#define TIM_EGR		0x14			/* Event Generation Reg			*/
+#define TIM_CCMR1	0x18			/* Capt/Comp 1 Mode Reg			*/
+#define TIM_CCMR2	0x1C			/* Capt/Comp 2 Mode Reg			*/
+#define TIM_CCER	0x20			/* Capt/Comp Enable Reg			*/
+#define TIM_CNT		0x24			/* Counter				*/
+#define TIM_PSC		0x28			/* Prescaler				*/
+#define TIM_ARR		0x2c			/* Auto-Reload Register			*/
+#define TIM_CCR1	0x34			/* Capt/Comp Register 1			*/
+#define TIM_CCR2	0x38			/* Capt/Comp Register 2			*/
+#define TIM_CCR3	0x3C			/* Capt/Comp Register 3			*/
+#define TIM_CCR4	0x40			/* Capt/Comp Register 4			*/
+#define TIM_BDTR	0x44			/* Break and Dead-Time Reg		*/
+#define TIM_DCR		0x48			/* DMA control register			*/
+#define TIM_DMAR	0x4C			/* DMA register for transfer		*/
+#define TIM_TISEL	0x68			/* Input Selection			*/
 
-#define TIM_CR1_CEN	BIT(0)	/* Counter Enable	   */
-#define TIM_CR1_DIR	BIT(4)  /* Counter Direction	   */
-#define TIM_CR1_ARPE	BIT(7)	/* Auto-reload Preload Ena */
-#define TIM_CR2_MMS	(BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */
-#define TIM_CR2_MMS2	GENMASK(23, 20) /* Master mode selection 2 */
-#define TIM_SMCR_SMS	(BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */
-#define TIM_SMCR_TS	(BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */
-#define TIM_DIER_UIE	BIT(0)	/* Update interrupt	   */
-#define TIM_DIER_CC1IE	BIT(1)  /* CC1 Interrupt Enable    */
-#define TIM_DIER_CC2IE	BIT(2)  /* CC2 Interrupt Enable    */
-#define TIM_DIER_CC3IE	BIT(3)  /* CC3 Interrupt Enable    */
-#define TIM_DIER_CC4IE	BIT(4)  /* CC4 Interrupt Enable    */
-#define TIM_DIER_CC_IE(x)	BIT((x) + 1) /* CC1, CC2, CC3, CC4 interrupt enable */
-#define TIM_DIER_UDE	BIT(8)  /* Update DMA request Enable */
-#define TIM_DIER_CC1DE	BIT(9)  /* CC1 DMA request Enable  */
-#define TIM_DIER_CC2DE	BIT(10) /* CC2 DMA request Enable  */
-#define TIM_DIER_CC3DE	BIT(11) /* CC3 DMA request Enable  */
-#define TIM_DIER_CC4DE	BIT(12) /* CC4 DMA request Enable  */
-#define TIM_DIER_COMDE	BIT(13) /* COM DMA request Enable  */
-#define TIM_DIER_TDE	BIT(14) /* Trigger DMA request Enable */
-#define TIM_SR_UIF	BIT(0)	/* Update interrupt flag   */
-#define TIM_SR_CC_IF(x)	BIT((x) + 1) /* CC1, CC2, CC3, CC4 interrupt flag */
-#define TIM_EGR_UG	BIT(0)	/* Update Generation       */
-#define TIM_CCMR_PE	BIT(3)	/* Channel Preload Enable  */
-#define TIM_CCMR_M1	(BIT(6) | BIT(5))  /* Channel PWM Mode 1 */
-#define TIM_CCMR_CC1S		(BIT(0) | BIT(1)) /* Capture/compare 1 sel */
-#define TIM_CCMR_IC1PSC		GENMASK(3, 2)	/* Input capture 1 prescaler */
-#define TIM_CCMR_CC2S		(BIT(8) | BIT(9)) /* Capture/compare 2 sel */
-#define TIM_CCMR_IC2PSC		GENMASK(11, 10)	/* Input capture 2 prescaler */
-#define TIM_CCMR_CC1S_TI1	BIT(0)	/* IC1/IC3 selects TI1/TI3 */
-#define TIM_CCMR_CC1S_TI2	BIT(1)	/* IC1/IC3 selects TI2/TI4 */
-#define TIM_CCMR_CC2S_TI2	BIT(8)	/* IC2/IC4 selects TI2/TI4 */
-#define TIM_CCMR_CC2S_TI1	BIT(9)	/* IC2/IC4 selects TI1/TI3 */
-#define TIM_CCMR_CC3S		(BIT(0) | BIT(1)) /* Capture/compare 3 sel */
-#define TIM_CCMR_CC4S		(BIT(8) | BIT(9)) /* Capture/compare 4 sel */
-#define TIM_CCMR_CC3S_TI3	BIT(0)	/* IC3 selects TI3 */
-#define TIM_CCMR_CC4S_TI4	BIT(8)	/* IC4 selects TI4 */
-#define TIM_CCER_CC1E	BIT(0)	/* Capt/Comp 1  out Ena    */
-#define TIM_CCER_CC1P	BIT(1)	/* Capt/Comp 1  Polarity   */
-#define TIM_CCER_CC1NE	BIT(2)	/* Capt/Comp 1N out Ena    */
-#define TIM_CCER_CC1NP	BIT(3)	/* Capt/Comp 1N Polarity   */
-#define TIM_CCER_CC2E	BIT(4)	/* Capt/Comp 2  out Ena    */
-#define TIM_CCER_CC2P	BIT(5)	/* Capt/Comp 2  Polarity   */
-#define TIM_CCER_CC2NP	BIT(7)	/* Capt/Comp 2N Polarity   */
-#define TIM_CCER_CC3E	BIT(8)	/* Capt/Comp 3  out Ena    */
-#define TIM_CCER_CC3P	BIT(9)	/* Capt/Comp 3  Polarity   */
-#define TIM_CCER_CC3NP	BIT(11)	/* Capt/Comp 3N Polarity   */
-#define TIM_CCER_CC4E	BIT(12)	/* Capt/Comp 4  out Ena    */
-#define TIM_CCER_CC4P	BIT(13)	/* Capt/Comp 4  Polarity   */
-#define TIM_CCER_CC4NP	BIT(15)	/* Capt/Comp 4N Polarity   */
-#define TIM_CCER_CCXE	(BIT(0) | BIT(4) | BIT(8) | BIT(12))
-#define TIM_BDTR_BKE(x)	BIT(12 + (x) * 12) /* Break input enable */
-#define TIM_BDTR_BKP(x)	BIT(13 + (x) * 12) /* Break input polarity */
-#define TIM_BDTR_AOE	BIT(14)	/* Automatic Output Enable */
-#define TIM_BDTR_MOE	BIT(15)	/* Main Output Enable      */
-#define TIM_BDTR_BKF(x)	(0xf << (16 + (x) * 4))
-#define TIM_DCR_DBA	GENMASK(4, 0)	/* DMA base addr */
-#define TIM_DCR_DBL	GENMASK(12, 8)	/* DMA burst len */
+#define TIM_CR1_CEN		BIT(0)					/* Counter Enable				*/
+#define TIM_CR1_DIR		BIT(4)					/* Counter Direction				*/
+#define TIM_CR1_ARPE		BIT(7)					/* Auto-reload Preload Ena			*/
+#define TIM_CR2_MMS		(BIT(4) | BIT(5) | BIT(6))		/* Master mode selection			*/
+#define TIM_CR2_MMS2		GENMASK(23, 20)				/* Master mode selection 2			*/
+#define TIM_SMCR_SMS		(BIT(0) | BIT(1) | BIT(2))		/* Slave mode selection				*/
+#define TIM_SMCR_TS		(BIT(4) | BIT(5) | BIT(6))		/* Trigger selection				*/
+#define TIM_DIER_UIE		BIT(0)					/* Update interrupt				*/
+#define TIM_DIER_CC1IE		BIT(1)					/* CC1 Interrupt Enable				*/
+#define TIM_DIER_CC2IE		BIT(2)					/* CC2 Interrupt Enable				*/
+#define TIM_DIER_CC3IE		BIT(3)					/* CC3 Interrupt Enable				*/
+#define TIM_DIER_CC4IE		BIT(4)					/* CC4 Interrupt Enable				*/
+#define TIM_DIER_CC_IE(x)	BIT((x) + 1)				/* CC1, CC2, CC3, CC4 interrupt enable		*/
+#define TIM_DIER_UDE		BIT(8)					/* Update DMA request Enable			*/
+#define TIM_DIER_CC1DE		BIT(9)					/* CC1 DMA request Enable			*/
+#define TIM_DIER_CC2DE		BIT(10)					/* CC2 DMA request Enable			*/
+#define TIM_DIER_CC3DE		BIT(11)					/* CC3 DMA request Enable			*/
+#define TIM_DIER_CC4DE		BIT(12)					/* CC4 DMA request Enable			*/
+#define TIM_DIER_COMDE		BIT(13)					/* COM DMA request Enable			*/
+#define TIM_DIER_TDE		BIT(14)					/* Trigger DMA request Enable			*/
+#define TIM_SR_UIF		BIT(0)					/* Update interrupt flag			*/
+#define TIM_SR_CC_IF(x)		BIT((x) + 1)				/* CC1, CC2, CC3, CC4 interrupt flag		*/
+#define TIM_EGR_UG		BIT(0)					/* Update Generation				*/
+#define TIM_CCMR_PE		BIT(3)					/* Channel Preload Enable			*/
+#define TIM_CCMR_M1		(BIT(6) | BIT(5))			/* Channel PWM Mode 1				*/
+#define TIM_CCMR_CC1S		(BIT(0) | BIT(1))			/* Capture/compare 1 sel			*/
+#define TIM_CCMR_IC1PSC		GENMASK(3, 2)				/* Input capture 1 prescaler			*/
+#define TIM_CCMR_CC2S		(BIT(8) | BIT(9))			/* Capture/compare 2 sel			*/
+#define TIM_CCMR_IC2PSC		GENMASK(11, 10)				/* Input capture 2 prescaler			*/
+#define TIM_CCMR_CC1S_TI1	BIT(0)					/* IC1/IC3 selects TI1/TI3			*/
+#define TIM_CCMR_CC1S_TI2	BIT(1)					/* IC1/IC3 selects TI2/TI4			*/
+#define TIM_CCMR_CC2S_TI2	BIT(8)					/* IC2/IC4 selects TI2/TI4			*/
+#define TIM_CCMR_CC2S_TI1	BIT(9)					/* IC2/IC4 selects TI1/TI3			*/
+#define TIM_CCMR_CC3S		(BIT(0) | BIT(1))			/* Capture/compare 3 sel			*/
+#define TIM_CCMR_CC4S		(BIT(8) | BIT(9))			/* Capture/compare 4 sel			*/
+#define TIM_CCMR_CC3S_TI3	BIT(0)					/* IC3 selects TI3				*/
+#define TIM_CCMR_CC4S_TI4	BIT(8)					/* IC4 selects TI4				*/
+#define TIM_CCER_CC1E		BIT(0)					/* Capt/Comp 1  out Ena				*/
+#define TIM_CCER_CC1P		BIT(1)					/* Capt/Comp 1  Polarity			*/
+#define TIM_CCER_CC1NE		BIT(2)					/* Capt/Comp 1N out Ena				*/
+#define TIM_CCER_CC1NP		BIT(3)					/* Capt/Comp 1N Polarity			*/
+#define TIM_CCER_CC2E		BIT(4)					/* Capt/Comp 2  out Ena				*/
+#define TIM_CCER_CC2P		BIT(5)					/* Capt/Comp 2  Polarity			*/
+#define TIM_CCER_CC2NP		BIT(7)					/* Capt/Comp 2N Polarity			*/
+#define TIM_CCER_CC3E		BIT(8)					/* Capt/Comp 3  out Ena				*/
+#define TIM_CCER_CC3P		BIT(9)					/* Capt/Comp 3  Polarity			*/
+#define TIM_CCER_CC3NP		BIT(11)					/* Capt/Comp 3N Polarity			*/
+#define TIM_CCER_CC4E		BIT(12)					/* Capt/Comp 4  out Ena				*/
+#define TIM_CCER_CC4P		BIT(13)					/* Capt/Comp 4  Polarity			*/
+#define TIM_CCER_CC4NP		BIT(15)					/* Capt/Comp 4N Polarity			*/
+#define TIM_CCER_CCXE		(BIT(0) | BIT(4) | BIT(8) | BIT(12))
+#define TIM_BDTR_BKE(x)		BIT(12 + (x) * 12)			/* Break input enable				*/
+#define TIM_BDTR_BKP(x)		BIT(13 + (x) * 12)			/* Break input polarity				*/
+#define TIM_BDTR_AOE		BIT(14)					/* Automatic Output Enable			*/
+#define TIM_BDTR_MOE		BIT(15)					/* Main Output Enable				*/
+#define TIM_BDTR_BKF(x)		(0xf << (16 + (x) * 4))
+#define TIM_DCR_DBA		GENMASK(4, 0)				/* DMA base addr				*/
+#define TIM_DCR_DBL		GENMASK(12, 8)				/* DMA burst len				*/
 
-#define MAX_TIM_PSC		0xFFFF
-#define MAX_TIM_ICPSC		0x3
-#define TIM_CR2_MMS_SHIFT	4
-#define TIM_CR2_MMS2_SHIFT	20
+#define MAX_TIM_PSC				0xFFFF
+#define MAX_TIM_ICPSC				0x3
+#define TIM_CR2_MMS_SHIFT			4
+#define TIM_CR2_MMS2_SHIFT			20
 #define TIM_SMCR_SMS_SLAVE_MODE_DISABLED	0 /* counts on internal clock when CEN=1 */
 #define TIM_SMCR_SMS_ENCODER_MODE_1		1 /* counts TI1FP1 edges, depending on TI2FP2 level */
 #define TIM_SMCR_SMS_ENCODER_MODE_2		2 /* counts TI2FP2 edges, depending on TI1FP1 level */
 #define TIM_SMCR_SMS_ENCODER_MODE_3		3 /* counts on both TI1FP1 and TI2FP2 edges */
-#define TIM_SMCR_TS_SHIFT	4
-#define TIM_BDTR_BKF_MASK	0xF
-#define TIM_BDTR_BKF_SHIFT(x)	(16 + (x) * 4)
+#define TIM_SMCR_TS_SHIFT			4
+#define TIM_BDTR_BKF_MASK			0xF
+#define TIM_BDTR_BKF_SHIFT(x)			(16 + (x) * 4)
 
 enum stm32_timers_dmas {
 	STM32_TIMERS_DMA_CH1,
Signature · 1 line
2.43.0
#2 lore raw

PATCH v2 2/5 mfd: stm32-timers: Add some register definitions with a parameter

In reply to Uwe Kleine-König

There are some registers that belong together and are numbered from 1 to
4. Introduce a macro definition for these that takes the channel number as parameter and define the previously available constants using the new ones.

This allows to simplify some users that up to now use constructs like

	TIM_CCER_CC1NE << (ch * 4)

which is an ugly mix of using a predefined value and still knowing internal details about it.

Note that there are several decrements by 1 involved. These are necessary because software guys start counting at 0 while the hardware designer started at 1 (and having TIM_CCER_CCxE(1) be TIM_CCER_CC2E isn't a sane option). The compiler is expected to optimize these out nicely.

---
 include/linux/mfd/stm32-timers.h | 60 +++++++++++++++++++-------------
 1 file changed, 35 insertions(+), 25 deletions(-)
include/linux/mfd/stm32-timers.h +35 -25
index 5794110b2b28..92b45a559656 100644
@@ -24,10 +24,11 @@
 #define TIM_CNT		0x24			/* Counter				*/
 #define TIM_PSC		0x28			/* Prescaler				*/
 #define TIM_ARR		0x2c			/* Auto-Reload Register			*/
-#define TIM_CCR1	0x34			/* Capt/Comp Register 1			*/
-#define TIM_CCR2	0x38			/* Capt/Comp Register 2			*/
-#define TIM_CCR3	0x3C			/* Capt/Comp Register 3			*/
-#define TIM_CCR4	0x40			/* Capt/Comp Register 4			*/
+#define TIM_CCRx(x)	(0x34 + 4 * ((x) - 1))	/* Capt/Comp Register x (x ∈ {1, .. 4})	*/
+#define TIM_CCR1	TIM_CCRx(1)		/* Capt/Comp Register 1			*/
+#define TIM_CCR2	TIM_CCRx(2)		/* Capt/Comp Register 2			*/
+#define TIM_CCR3	TIM_CCRx(3)		/* Capt/Comp Register 3			*/
+#define TIM_CCR4	TIM_CCRx(4)		/* Capt/Comp Register 4			*/
 #define TIM_BDTR	0x44			/* Break and Dead-Time Reg		*/
 #define TIM_DCR		0x48			/* DMA control register			*/
 #define TIM_DMAR	0x4C			/* DMA register for transfer		*/
@@ -41,16 +42,18 @@
 #define TIM_SMCR_SMS		(BIT(0) | BIT(1) | BIT(2))		/* Slave mode selection				*/
 #define TIM_SMCR_TS		(BIT(4) | BIT(5) | BIT(6))		/* Trigger selection				*/
 #define TIM_DIER_UIE		BIT(0)					/* Update interrupt				*/
-#define TIM_DIER_CC1IE		BIT(1)					/* CC1 Interrupt Enable				*/
-#define TIM_DIER_CC2IE		BIT(2)					/* CC2 Interrupt Enable				*/
-#define TIM_DIER_CC3IE		BIT(3)					/* CC3 Interrupt Enable				*/
-#define TIM_DIER_CC4IE		BIT(4)					/* CC4 Interrupt Enable				*/
+#define TIM_DIER_CCxIE(x)	BIT(1 + ((x) - 1))			/* CCx Interrupt Enable	(x ∈ {1, .. 4})		*/
+#define TIM_DIER_CC1IE		TIM_DIER_CCxIE(1)			/* CC1 Interrupt Enable				*/
+#define TIM_DIER_CC2IE		TIM_DIER_CCxIE(2)			/* CC2 Interrupt Enable				*/
+#define TIM_DIER_CC3IE		TIM_DIER_CCxIE(3)			/* CC3 Interrupt Enable				*/
+#define TIM_DIER_CC4IE		TIM_DIER_CCxIE(4)			/* CC4 Interrupt Enable				*/
 #define TIM_DIER_CC_IE(x)	BIT((x) + 1)				/* CC1, CC2, CC3, CC4 interrupt enable		*/
 #define TIM_DIER_UDE		BIT(8)					/* Update DMA request Enable			*/
-#define TIM_DIER_CC1DE		BIT(9)					/* CC1 DMA request Enable			*/
-#define TIM_DIER_CC2DE		BIT(10)					/* CC2 DMA request Enable			*/
-#define TIM_DIER_CC3DE		BIT(11)					/* CC3 DMA request Enable			*/
-#define TIM_DIER_CC4DE		BIT(12)					/* CC4 DMA request Enable			*/
+#define TIM_DIER_CCxDE(x)	BIT(9 + ((x) - 1))			/* CCx DMA request Enable (x ∈ {1, .. 4})	*/
+#define TIM_DIER_CC1DE		TIM_DIER_CCxDE(1)			/* CC1 DMA request Enable			*/
+#define TIM_DIER_CC2DE		TIM_DIER_CCxDE(2)			/* CC2 DMA request Enable			*/
+#define TIM_DIER_CC3DE		TIM_DIER_CCxDE(3)			/* CC3 DMA request Enable			*/
+#define TIM_DIER_CC4DE		TIM_DIER_CCxDE(4)			/* CC4 DMA request Enable			*/
 #define TIM_DIER_COMDE		BIT(13)					/* COM DMA request Enable			*/
 #define TIM_DIER_TDE		BIT(14)					/* Trigger DMA request Enable			*/
 #define TIM_SR_UIF		BIT(0)					/* Update interrupt flag			*/
@@ -70,19 +73,26 @@
 #define TIM_CCMR_CC4S		(BIT(8) | BIT(9))			/* Capture/compare 4 sel			*/
 #define TIM_CCMR_CC3S_TI3	BIT(0)					/* IC3 selects TI3				*/
 #define TIM_CCMR_CC4S_TI4	BIT(8)					/* IC4 selects TI4				*/
-#define TIM_CCER_CC1E		BIT(0)					/* Capt/Comp 1  out Ena				*/
-#define TIM_CCER_CC1P		BIT(1)					/* Capt/Comp 1  Polarity			*/
-#define TIM_CCER_CC1NE		BIT(2)					/* Capt/Comp 1N out Ena				*/
-#define TIM_CCER_CC1NP		BIT(3)					/* Capt/Comp 1N Polarity			*/
-#define TIM_CCER_CC2E		BIT(4)					/* Capt/Comp 2  out Ena				*/
-#define TIM_CCER_CC2P		BIT(5)					/* Capt/Comp 2  Polarity			*/
-#define TIM_CCER_CC2NP		BIT(7)					/* Capt/Comp 2N Polarity			*/
-#define TIM_CCER_CC3E		BIT(8)					/* Capt/Comp 3  out Ena				*/
-#define TIM_CCER_CC3P		BIT(9)					/* Capt/Comp 3  Polarity			*/
-#define TIM_CCER_CC3NP		BIT(11)					/* Capt/Comp 3N Polarity			*/
-#define TIM_CCER_CC4E		BIT(12)					/* Capt/Comp 4  out Ena				*/
-#define TIM_CCER_CC4P		BIT(13)					/* Capt/Comp 4  Polarity			*/
-#define TIM_CCER_CC4NP		BIT(15)					/* Capt/Comp 4N Polarity			*/
+#define TIM_CCER_CCxE(x)	BIT(0 + 4 * ((x) - 1))			/* Capt/Comp x  out Ena (x ∈ {1, .. 4})		*/
+#define TIM_CCER_CCxP(x)	BIT(1 + 4 * ((x) - 1))			/* Capt/Comp x  Polarity (x ∈ {1, .. 4})	*/
+#define TIM_CCER_CCxNE(x)	BIT(2 + 4 * ((x) - 1))			/* Capt/Comp xN out Ena (x ∈ {1, .. 4})		*/
+#define TIM_CCER_CCxNP(x)	BIT(3 + 4 * ((x) - 1))			/* Capt/Comp xN Polarity (x ∈ {1, .. 4})	*/
+#define TIM_CCER_CC1E		TIM_CCER_CCxE(1)			/* Capt/Comp 1  out Ena				*/
+#define TIM_CCER_CC1P		TIM_CCER_CCxP(1)			/* Capt/Comp 1  Polarity			*/
+#define TIM_CCER_CC1NE		TIM_CCER_CCxNE(1)			/* Capt/Comp 1N out Ena				*/
+#define TIM_CCER_CC1NP		TIM_CCER_CCxNP(1)			/* Capt/Comp 1N Polarity			*/
+#define TIM_CCER_CC2E		TIM_CCER_CCxE(2)			/* Capt/Comp 2  out Ena				*/
+#define TIM_CCER_CC2P		TIM_CCER_CCxP(2)			/* Capt/Comp 2  Polarity			*/
+#define TIM_CCER_CC2NE		TIM_CCER_CCxNE(2)			/* Capt/Comp 2N out Ena				*/
+#define TIM_CCER_CC2NP		TIM_CCER_CCxNP(2)			/* Capt/Comp 2N Polarity			*/
+#define TIM_CCER_CC3E		TIM_CCER_CCxE(3)			/* Capt/Comp 3  out Ena				*/
+#define TIM_CCER_CC3P		TIM_CCER_CCxP(3)			/* Capt/Comp 3  Polarity			*/
+#define TIM_CCER_CC3NE		TIM_CCER_CCxNE(3)			/* Capt/Comp 3N out Ena				*/
+#define TIM_CCER_CC3NP		TIM_CCER_CCxNP(3)			/* Capt/Comp 3N Polarity			*/
+#define TIM_CCER_CC4E		TIM_CCER_CCxE(4)			/* Capt/Comp 4  out Ena				*/
+#define TIM_CCER_CC4P		TIM_CCER_CCxP(4)			/* Capt/Comp 4  Polarity			*/
+#define TIM_CCER_CC4NE		TIM_CCER_CCxNE(4)			/* Capt/Comp 4N out Ena				*/
+#define TIM_CCER_CC4NP		TIM_CCER_CCxNP(4)			/* Capt/Comp 4N Polarity			*/
 #define TIM_CCER_CCXE		(BIT(0) | BIT(4) | BIT(8) | BIT(12))
 #define TIM_BDTR_BKE(x)		BIT(12 + (x) * 12)			/* Break input enable				*/
 #define TIM_BDTR_BKP(x)		BIT(13 + (x) * 12)			/* Break input polarity				*/
Signature · 1 line
2.43.0
#3 lore raw

PATCH v2 3/5 counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)

In reply to Uwe Kleine-König

These two defines have the same purpose and this change doesn't introduce any differences in drivers/counter/stm32-timer-cnt.o.

The only difference between the two is that

	TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE

while

	TIM_DIER_CCxIE(1) == TIM_DIER_CC1IE

. That makes it necessary to have an explicit "+ 1" in the user code, but IMHO this is a good thing as this is the code locatation that "knows" that for software channel 1 you have to use TIM_DIER_CC2IE (because software guys start counting at 0, while the relevant hardware designer started at 1).

---
 drivers/counter/stm32-timer-cnt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/counter/stm32-timer-cnt.c +2 -2
index 0664ef969f79..186e73d6ccb4 100644
@@ -465,7 +465,7 @@ static int stm32_count_events_configure(struct counter_device *counter)
 			ret = stm32_count_capture_configure(counter, event_node->channel, true);
 			if (ret)
 				return ret;
-			dier |= TIM_DIER_CC_IE(event_node->channel);
+			dier |= TIM_DIER_CCxIE(event_node->channel + 1);
 			break;
 		default:
 			/* should never reach this path */
@@ -478,7 +478,7 @@ static int stm32_count_events_configure(struct counter_device *counter)
 
 	/* check for disabled capture events */
 	for (i = 0 ; i < priv->nchannels; i++) {
-		if (!(dier & TIM_DIER_CC_IE(i))) {
+		if (!(dier & TIM_DIER_CCxIE(i + 1))) {
 			ret = stm32_count_capture_configure(counter, i, false);
 			if (ret)
 				return ret;
Signature · 1 line
2.43.0
maintainer
#4 lore raw

Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)

Quoted 17 lines · Uwe Kleine-König

These two defines have the same purpose and this change doesn't introduce any differences in drivers/counter/stm32-timer-cnt.o.

The only difference between the two is that

	TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE

while

	TIM_DIER_CCxIE(1) == TIM_DIER_CC1IE

. That makes it necessary to have an explicit "+ 1" in the user code, but IMHO this is a good thing as this is the code locatation that "knows" that for software channel 1 you have to use TIM_DIER_CC2IE (because software guys start counting at 0, while the relevant hardware designer started at 1).

Quoted 4 lines
---
 drivers/counter/stm32-timer-cnt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Did you drop William's Ack on purpose?

Signature · 1 line
Lee Jones [李琼斯]
maintainer Acked-by
#5 lore raw

Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)

Quoted 19 lines · Lee Jones
Quoted 17 lines · Uwe Kleine-König

These two defines have the same purpose and this change doesn't introduce any differences in drivers/counter/stm32-timer-cnt.o.

The only difference between the two is that

	TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE

while

	TIM_DIER_CCxIE(1) == TIM_DIER_CC1IE

. That makes it necessary to have an explicit "+ 1" in the user code, but IMHO this is a good thing as this is the code locatation that "knows" that for software channel 1 you have to use TIM_DIER_CC2IE (because software guys start counting at 0, while the relevant hardware designer started at 1).

Quoted 9 lines
Quoted 4 lines
---
 drivers/counter/stm32-timer-cnt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Did you drop William's Ack on purpose?

Signature · 1 line
Lee Jones [李琼斯]

No problem, here it is again for the sake of the LKML scraper tools:

Lee, do you prefer taking this patchset through your tree?

William Breathitt Gray

maintainer
#6 lore raw

Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)

Quoted 27 lines · William Breathitt Gray
Quoted 26 lines · Lee Jones
Quoted 17 lines · Uwe Kleine-König

These two defines have the same purpose and this change doesn't introduce any differences in drivers/counter/stm32-timer-cnt.o.

The only difference between the two is that

	TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE

while

	TIM_DIER_CCxIE(1) == TIM_DIER_CC1IE

. That makes it necessary to have an explicit "+ 1" in the user code, but IMHO this is a good thing as this is the code locatation that "knows" that for software channel 1 you have to use TIM_DIER_CC2IE (because software guys start counting at 0, while the relevant hardware designer started at 1).

Quoted 4 lines
---
 drivers/counter/stm32-timer-cnt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Did you drop William's Ack on purpose?

Quoted 8 lines
Quoted 2 lines
Signature · 1 line
Lee Jones [李琼斯]

No problem, here it is again for the sake of the LKML scraper tools:

Lee, do you prefer taking this patchset through your tree?

I think that would make things easier.

A pull-request for you and the PWM folk would follow.

Signature · 1 line
Lee Jones [李琼斯]
#7 lore raw

Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)

In reply to Lee Jones

Hello Lee,

Quoted 19 lines · Lee Jones
Quoted 17 lines · Uwe Kleine-König

These two defines have the same purpose and this change doesn't introduce any differences in drivers/counter/stm32-timer-cnt.o.

The only difference between the two is that

	TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE

while

	TIM_DIER_CCxIE(1) == TIM_DIER_CC1IE

. That makes it necessary to have an explicit "+ 1" in the user code, but IMHO this is a good thing as this is the code locatation that "knows" that for software channel 1 you have to use TIM_DIER_CC2IE (because software guys start counting at 0, while the relevant hardware designer started at 1).

Quoted 6 lines
Quoted 4 lines
---
 drivers/counter/stm32-timer-cnt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Did you drop William's Ack on purpose?

Yes, because a) I was unsure what he didn't like about the subject, and (more importantly) b) I split the patch in question. I should have written that in the cover letter, sorry.

(Note I only announced to have fixed the subject prefix of the pwm patch. I assume you won't include that in your pull request, but if you do, please do s/-/: / on it. That's another thing I failed with for this series.)

Best regards
Uwe

maintainer
#8 lore raw

Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)

Quoted 29 lines · Uwe Kleine-König

Hello Lee,

Quoted 19 lines · Lee Jones
Quoted 17 lines · Uwe Kleine-König

These two defines have the same purpose and this change doesn't introduce any differences in drivers/counter/stm32-timer-cnt.o.

The only difference between the two is that

	TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE

while

	TIM_DIER_CCxIE(1) == TIM_DIER_CC1IE

. That makes it necessary to have an explicit "+ 1" in the user code, but IMHO this is a good thing as this is the code locatation that "knows" that for software channel 1 you have to use TIM_DIER_CC2IE (because software guys start counting at 0, while the relevant hardware designer started at 1).

Quoted 6 lines
Quoted 4 lines
---
 drivers/counter/stm32-timer-cnt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Did you drop William's Ack on purpose?

Quoted 8 lines

Yes, because a) I was unsure what he didn't like about the subject, and (more importantly) b) I split the patch in question. I should have written that in the cover letter, sorry.

(Note I only announced to have fixed the subject prefix of the pwm patch. I assume you won't include that in your pull request, but if you do, please do s/-/: / on it. That's another thing I failed with for this series.)

Which patches need to be in the pull-request and which can be hoovered up by their associated subsystems?

Signature · 1 line
Lee Jones [李琼斯]
#9 lore raw

Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)

Hello Lee,

Quoted 2 lines · Lee Jones

Which patches need to be in the pull-request and which can be hoovered up by their associated subsystems?

The dependencies are as follows:

	#1 <- #2 <- #3 <- #4
	       ^
	      #5

So the practical options are (in the order of my not very strong preference):

- Immutable branch with #1 - #4 (assuming William is ok to let you merge #3), and then I can add #5 (and further work on the pwm-stm32 driver that I'm currently working on). Maybe William even doesn't need to pull; I didn't check.

- Immutable branch with only #1 and #2. Then William can pull and add #3 and I can pull and add #5. #4 can be applied later then. (I can remind about #4 in the next cycle.)

- Immutable branch with #1 - #5
(Reminder: In that case please fixup the pwm patch's short log with s/-/: /)
I would add this for sure to the pwm tree. I didn't even try to check if it's needed for mfd and/or counter. So if you don't need it, I volunteer to create that branch, but if you want to do it, that's just fine, too.

Best regards
Uwe

#10 lore raw

Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)

Hello,

Quoted 21 lines · Uwe Kleine-König
Quoted 2 lines · Lee Jones

Which patches need to be in the pull-request and which can be hoovered up by their associated subsystems?

The dependencies are as follows:

	#1 <- #2 <- #3 <- #4
	       ^
	      #5

So the practical options are (in the order of my not very strong preference):

- Immutable branch with #1 - #4 (assuming William is ok to let you merge #3), and then I can add #5 (and further work on the pwm-stm32 driver that I'm currently working on). Maybe William even doesn't need to pull; I didn't check.

- Immutable branch with only #1 and #2. Then William can pull and add #3 and I can pull and add #5. #4 can be applied later then. (I can remind about #4 in the next cycle.)

Quoted 7 lines

- Immutable branch with #1 - #5
(Reminder: In that case please fixup the pwm patch's short log with s/-/: /)
I would add this for sure to the pwm tree. I didn't even try to check if it's needed for mfd and/or counter. So if you don't need it, I volunteer to create that branch, but if you want to do it, that's just fine, too.

I wonder what's the state here. Maybe Lee waiting for William to send an Ack that Lee can do the first option?

Best regards
Uwe

#11 lore raw

Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)

Hello,

Quoted 2 lines · Uwe Kleine-König

I wonder what's the state here. Maybe Lee waiting for William to send an Ack that Lee can do the first option?

Huh, sorry for the noise, just noticed Lee's mail after sending mine ...

Best regards
Uwe

#12 lore raw

PATCH v2 4/5 mfd: stm32-timers: Drop unused TIM_DIER_CC_IE

In reply to Uwe Kleine-König

This macro is misleading as

	TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE

. The only user was updated to use TIM_DIER_CCxIE() instead which doesn't suffer from this mismatch, so TIM_DIER_CC_IE can be dropped.

---
 include/linux/mfd/stm32-timers.h | 1 -
 1 file changed, 1 deletion(-)
include/linux/mfd/stm32-timers.h +0 -1
index 92b45a559656..f09ba598c97a 100644
@@ -47,7 +47,6 @@
 #define TIM_DIER_CC2IE		TIM_DIER_CCxIE(2)			/* CC2 Interrupt Enable				*/
 #define TIM_DIER_CC3IE		TIM_DIER_CCxIE(3)			/* CC3 Interrupt Enable				*/
 #define TIM_DIER_CC4IE		TIM_DIER_CCxIE(4)			/* CC4 Interrupt Enable				*/
-#define TIM_DIER_CC_IE(x)	BIT((x) + 1)				/* CC1, CC2, CC3, CC4 interrupt enable		*/
 #define TIM_DIER_UDE		BIT(8)					/* Update DMA request Enable			*/
 #define TIM_DIER_CCxDE(x)	BIT(9 + ((x) - 1))			/* CCx DMA request Enable (x ∈ {1, .. 4})	*/
 #define TIM_DIER_CC1DE		TIM_DIER_CCxDE(1)			/* CC1 DMA request Enable			*/
Signature · 1 line
2.43.0
#13 lore raw

PATCH v2 5/5 pwm-stm32: Make use of parametrised register definitions

In reply to Uwe Kleine-König

There is no semantic change, but it is a nicer on the eyes of a reader, because

	TIM_CCR1 + 4 * ch

encodes internal register knowledge, while

	TIM_CCRx(ch + 1)

keeps that information completely in the header defining the registers.

While I expected this to not result in any changes in the binary, gcc 13 (as provided by Debian in the gcc-13-arm-linux-gnueabihf 13.2.0-12cross1 package) compiles the new version with an allmodconfig to more compact code:

	$ source/scripts/bloat-o-meter drivers/pwm/pwm-stm32.o-pre drivers/pwm/pwm-stm32.o
	add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-488 (-488)
	Function                                     old     new   delta
	stm32_pwm_get_state                          968     936     -32
	stm32_pwm_apply_locked                      1920    1464    -456
---
 drivers/pwm/pwm-stm32.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
drivers/pwm/pwm-stm32.c +11 -11
index a2f231d13a9f..49a76514b83e 100644
@@ -360,7 +360,7 @@ static int stm32_pwm_config(struct stm32_pwm *priv, unsigned int ch,
 	dty = mul_u64_u64_div_u64(duty_ns, clk_get_rate(priv->clk),
 				  (u64)NSEC_PER_SEC * (prescaler + 1));
 
-	regmap_write(priv->regmap, TIM_CCR1 + 4 * ch, dty);
+	regmap_write(priv->regmap, TIM_CCRx(ch + 1), dty);
 
 	/* Configure output mode */
 	shift = (ch & 0x1) * CCMR_CHANNEL_SHIFT;
@@ -382,9 +382,9 @@ static int stm32_pwm_set_polarity(struct stm32_pwm *priv, unsigned int ch,
 {
 	u32 mask;
 
-	mask = TIM_CCER_CC1P << (ch * 4);
+	mask = TIM_CCER_CCxP(ch + 1);
 	if (priv->have_complementary_output)
-		mask |= TIM_CCER_CC1NP << (ch * 4);
+		mask |= TIM_CCER_CCxNP(ch + 1);
 
 	regmap_update_bits(priv->regmap, TIM_CCER, mask,
 			   polarity == PWM_POLARITY_NORMAL ? 0 : mask);
@@ -402,9 +402,9 @@ static int stm32_pwm_enable(struct stm32_pwm *priv, unsigned int ch)
 		return ret;
 
 	/* Enable channel */
-	mask = TIM_CCER_CC1E << (ch * 4);
+	mask = TIM_CCER_CCxE(ch + 1);
 	if (priv->have_complementary_output)
-		mask |= TIM_CCER_CC1NE << (ch * 4);
+		mask |= TIM_CCER_CCxNE(ch);
 
 	regmap_set_bits(priv->regmap, TIM_CCER, mask);
 
@@ -422,9 +422,9 @@ static void stm32_pwm_disable(struct stm32_pwm *priv, unsigned int ch)
 	u32 mask;
 
 	/* Disable channel */
-	mask = TIM_CCER_CC1E << (ch * 4);
+	mask = TIM_CCER_CCxE(ch + 1);
 	if (priv->have_complementary_output)
-		mask |= TIM_CCER_CC1NE << (ch * 4);
+		mask |= TIM_CCER_CCxNE(ch + 1);
 
 	regmap_clear_bits(priv->regmap, TIM_CCER, mask);
 
@@ -493,8 +493,8 @@ static int stm32_pwm_get_state(struct pwm_chip *chip,
 	if (ret)
 		goto out;
 
-	state->enabled = ccer & (TIM_CCER_CC1E << (ch * 4));
-	state->polarity = (ccer & (TIM_CCER_CC1P << (ch * 4))) ?
+	state->enabled = ccer & TIM_CCER_CCxE(ch + 1);
+	state->polarity = (ccer & TIM_CCER_CCxP(ch + 1)) ?
 			  PWM_POLARITY_INVERSED : PWM_POLARITY_NORMAL;
 	ret = regmap_read(priv->regmap, TIM_PSC, &psc);
 	if (ret)
@@ -502,7 +502,7 @@ static int stm32_pwm_get_state(struct pwm_chip *chip,
 	ret = regmap_read(priv->regmap, TIM_ARR, &arr);
 	if (ret)
 		goto out;
-	ret = regmap_read(priv->regmap, TIM_CCR1 + 4 * ch, &ccr);
+	ret = regmap_read(priv->regmap, TIM_CCRx(ch + 1), &ccr);
 	if (ret)
 		goto out;
 
@@ -702,7 +702,7 @@ static int stm32_pwm_suspend(struct device *dev)
 	ccer = active_channels(priv);
 
 	for (i = 0; i < chip->npwm; i++) {
-		mask = TIM_CCER_CC1E << (i * 4);
+		mask = TIM_CCER_CCxE(i + 1);
 		if (ccer & mask) {
 			dev_err(dev, "PWM %u still in use by consumer %s\n",
 				i, chip->pwms[i].label);
Signature · 1 line
2.43.0
maintainer
#14 lore raw
In reply to Uwe Kleine-König
Quoted 37 lines · Uwe Kleine-König

Hello,

(implicit) v1 is available at
https://lore.kernel.org/lkml/[email protected]
.

Changes introduced here:

- Split the patch removing TIM_DIER_CC_IE() and use appropriate subject prefixes. Lee and William didn't like the patch touching both include/linux/mfd/stm32-timers.h and drivers/counter/stm32-timer-cnt.c not having a hint to the counter subsystem (at least that's my interpretation of their feedback). Not mentioning mfd didn't seem to be considerably better in my eyes, so I split this patch.
- Fix typo noticed by Thorsten.
- Update subject prefix of the last patch to match what is usually done for pwm.

I have some further updates to the pwm-stm32 driver that will probably go in before v6.10-rc1. They shouldn't conflict, still I'd prefer to let the pwm patch go in via my tree as I might have some further changes for that driver. So if this is merged using the mfd or counter tree, please skip the pwm patch. A stable branch would be welcome in this case.

Best regards
Uwe

Uwe Kleine-König (5):
mfd: stm32-timers: Unify alignment of register definition
mfd: stm32-timers: Add some register definitions with a parameter
counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of
TIM_DIER_CCxIE(x)
mfd: stm32-timers: Drop unused TIM_DIER_CC_IE
pwm: stm32: Make use of parametrised register definitions

Quoted 6 lines
 drivers/counter/stm32-timer-cnt.c |   4 +-
 drivers/pwm/pwm-stm32.c           |  22 ++--
 include/linux/mfd/stm32-timers.h  | 179 ++++++++++++++++--------------
 3 files changed, 107 insertions(+), 98 deletions(-)

base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0

Applied patches 1-4 and submitted for build testing.

If all is good, I'll sent out a PR for William.

Note to self: ib-mfd-counter-5.11

Signature · 1 line
Lee Jones [李琼斯]
maintainer
#15 lore raw

[GIT PULL] Immutable branch between MFD and Counter due for the v5.11 merge window

Enjoy!

The following changes since commit 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0:

Linux 6.10-rc1 (2024-05-26 15:20:12 -0700)

are available in the Git repository at:

ssh://[email protected]/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-counter-v5.11

for you to fetch changes up to 304d02aa711369da89b4f8c01702bf1b5d1f7abc:

mfd: stm32-timers: Drop unused TIM_DIER_CC_IE (2024-06-26 16:09:58 +0100)

----------------------------------------------------------------
Immutable branch between MFD and Counter due for the v5.11 merge window

----------------------------------------------------------------
Uwe Kleine-König (4):
mfd: stm32-timers: Unify alignment of register definition
mfd: stm32-timers: Add some register definitions with a parameter
counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
mfd: stm32-timers: Drop unused TIM_DIER_CC_IE

 drivers/counter/stm32-timer-cnt.c |   4 +-
 include/linux/mfd/stm32-timers.h  | 179 ++++++++++++++++++++------------------
 2 files changed, 96 insertions(+), 87 deletions(-)
Signature · 1 line
Lee Jones [李琼斯]
#16 lore raw

Re: [GIT PULL] Immutable branch between MFD and Counter due for the v5.11 merge window

Hi Lee,

Quoted 11 lines · Lee Jones

The following changes since commit 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0:

Linux 6.10-rc1 (2024-05-26 15:20:12 -0700)

are available in the Git repository at:

ssh://[email protected]/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-counter-v5.11

for you to fetch changes up to 304d02aa711369da89b4f8c01702bf1b5d1f7abc:

mfd: stm32-timers: Drop unused TIM_DIER_CC_IE (2024-06-26 16:09:58 +0100)

Thanks, merged into pwm/for-next!

Best regards
Uwe

#17 lore raw

Re: [GIT PULL] Immutable branch between MFD and Counter due for the v5.11 merge window

In reply to Lee Jones
Quoted 24 lines · Lee Jones

Enjoy!

The following changes since commit 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0:

Linux 6.10-rc1 (2024-05-26 15:20:12 -0700)

are available in the Git repository at:

ssh://[email protected]/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-counter-v5.11

for you to fetch changes up to 304d02aa711369da89b4f8c01702bf1b5d1f7abc:

mfd: stm32-timers: Drop unused TIM_DIER_CC_IE (2024-06-26 16:09:58 +0100)

----------------------------------------------------------------
Immutable branch between MFD and Counter due for the v5.11 merge window

----------------------------------------------------------------
Uwe Kleine-König (4):
mfd: stm32-timers: Unify alignment of register definition
mfd: stm32-timers: Add some register definitions with a parameter
counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
mfd: stm32-timers: Drop unused TIM_DIER_CC_IE

Quoted 6 lines
 drivers/counter/stm32-timer-cnt.c |   4 +-
 include/linux/mfd/stm32-timers.h  | 179 ++++++++++++++++++++------------------
 2 files changed, 96 insertions(+), 87 deletions(-)
Signature · 1 line
Lee Jones [李琼斯]

Merged and pushed out to counter-next.

Thanks,

William Breathitt Gray