Skip to contentSkip to conversation

image-bootfiles: new class

PATCH Superseded Marcus Folkesson 2 participants 6 messages Jun 19, 2024 – Jul 3, 2024 1 message not in the archive

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v5 cover image-bootfiles: new class

The image-bootfiles class is used to put all files listed in IMAGE_BOOT_FILES into the root filesystem.

IMAGE_BOOT_FILES is used by the bootimg-partition wic plugin to put the files into a boot partition.
Be able to list files as "boot files" in e.g. your .conf or image files instead of install those in every recipe is a good thing.

It is not always desired to have a separate boot partition for boot files. Sometimes it could be good to have them as a part of the root filesystem.

For example, if a double copy strategy is used for update the system, then you probably want to update both the boot files and root filesystem at the same time as there may be dependencies.

v2:
- Removed the documentation from the patch series (will be submitted later)
- Break out the parts in bootimg-partition that is used by image-bootfiles to a common library
- Make the destination directory in root filesystem configurable
v3:
- See changelog in patches

v4:
- See changelog in patches

v5:
- See changelog in patches

Marcus Folkesson (2):
bootimg-partition: break out code to a common library. image-bootfiles.bbclass: new class, copy boot files to root filesystem

 meta/classes/image-bootfiles.bbclass          | 41 +++++++++++++
 meta/lib/oe/bootfiles.py                      | 57 +++++++++++++++++++
 .../wic/plugins/source/bootimg-partition.py   | 39 +------------
 3 files changed, 100 insertions(+), 37 deletions(-)
 create mode 100644 meta/classes/image-bootfiles.bbclass
 create mode 100644 meta/lib/oe/bootfiles.py
Signature · 1 line
2.45.1
#1 lore raw

PATCH v5 1/2 bootimg-partition: break out code to a common library.

Break out the code that parse IMAGE_BOOT_FILES to a common library.

---

Notes:
v3:
- Removed unnecessary "import glob"
- Explicitely tell that bootfiles_populate() returns a tuple
v4:
- Remove the right "import glob" :-)
v5:
- No changes

 meta/lib/oe/bootfiles.py                      | 57 +++++++++++++++++++
 .../wic/plugins/source/bootimg-partition.py   | 39 +------------
 2 files changed, 59 insertions(+), 37 deletions(-)
 create mode 100644 meta/lib/oe/bootfiles.py
meta/lib/oe/bootfiles.py new file +57 -0
new file mode 100644
index 0000000000..155fe742db
@@ -0,0 +1,57 @@
+#
+# SPDX-License-Identifier: MIT
+#
+# Copyright (C) 2024 Marcus Folkesson
+# Author: Marcus Folkesson <[email protected]>
+#
+# Utility functions handling boot files
+#
+# Look into deploy_dir and search for boot_files.
+# Returns a list of tuples with (original filepath relative to
+# deploy_dir, desired filepath renaming)
+#
+# Heavily inspired of bootimg-partition.py
+#
+def get_boot_files(deploy_dir, boot_files):
+    import re
+    import os
+    from glob import glob
+
+    if boot_files is None:
+        return None
+
+    # list of tuples (src_name, dst_name)
+    deploy_files = []
+    for src_entry in re.findall(r'[\w;\-\./\*]+', boot_files):
+        if ';' in src_entry:
+            dst_entry = tuple(src_entry.split(';'))
+            if not dst_entry[0] or not dst_entry[1]:
+                raise ValueError('Malformed boot file entry: %s' % src_entry)
+        else:
+            dst_entry = (src_entry, src_entry)
+
+        deploy_files.append(dst_entry)
+
+    install_files = []
+    for deploy_entry in deploy_files:
+        src, dst = deploy_entry
+        if '*' in src:
+            # by default install files under their basename
+            entry_name_fn = os.path.basename
+            if dst != src:
+                # unless a target name was given, then treat name
+                # as a directory and append a basename
+                entry_name_fn = lambda name: \
+                                os.path.join(dst,
+                                             os.path.basename(name))
+
+            srcs = glob(os.path.join(deploy_dir, src))
+
+            for entry in srcs:
+                src = os.path.relpath(entry, deploy_dir)
+                entry_dst_name = entry_name_fn(entry)
+                install_files.append((src, entry_dst_name))
+        else:
+            install_files.append((src, dst))
+
+    return install_files
scripts/lib/wic/plugins/source/bootimg-partition.py +2 -37
index 1071d1af3f..589853a439 100644
@@ -16,7 +16,7 @@ import logging
 import os
 import re
 
-from glob import glob
+from oe.bootfiles import get_boot_files
 
 from wic import WicError
 from wic.engine import get_custom_config
@@ -66,42 +66,7 @@ class BootimgPartitionPlugin(SourcePlugin):
 
         logger.debug('Boot files: %s', boot_files)
 
-        # list of tuples (src_name, dst_name)
-        deploy_files = []
-        for src_entry in re.findall(r'[\w;\-\./\*]+', boot_files):
-            if ';' in src_entry:
-                dst_entry = tuple(src_entry.split(';'))
-                if not dst_entry[0] or not dst_entry[1]:
-                    raise WicError('Malformed boot file entry: %s' % src_entry)
-            else:
-                dst_entry = (src_entry, src_entry)
-
-            logger.debug('Destination entry: %r', dst_entry)
-            deploy_files.append(dst_entry)
-
-        cls.install_task = [];
-        for deploy_entry in deploy_files:
-            src, dst = deploy_entry
-            if '*' in src:
-                # by default install files under their basename
-                entry_name_fn = os.path.basename
-                if dst != src:
-                    # unless a target name was given, then treat name
-                    # as a directory and append a basename
-                    entry_name_fn = lambda name: \
-                                    os.path.join(dst,
-                                                 os.path.basename(name))
-
-                srcs = glob(os.path.join(kernel_dir, src))
-
-                logger.debug('Globbed sources: %s', ', '.join(srcs))
-                for entry in srcs:
-                    src = os.path.relpath(entry, kernel_dir)
-                    entry_dst_name = entry_name_fn(entry)
-                    cls.install_task.append((src, entry_dst_name))
-            else:
-                cls.install_task.append((src, dst))
-
+        cls.install_task = get_boot_files(kernel_dir, boot_files)
         if source_params.get('loader') != "u-boot":
             return
 
Signature · 1 line
2.45.1
#2 lore raw

PATCH v5 2/2 image-bootfiles.bbclass: new class, copy boot files to root filesystem

In reply to Marcus Folkesson

image-bootfiles class copy files listed in IMAGE_BOOT_FILES to the IMAGE_BOOT_FILES_DIR directory of the root filesystem.

This is useful when there is no explicit boot partition but all boot files should instead reside inside the root filesystem.

---

Notes:
v3:
- Skip the intermediate bootfiles() function
- Rename variable names to be consistent
- Various python optimizations
v4:
- Correct usage description
- Create image_dst before copy
v5:
- Check if install_files is [] rather than None
- Print warning if overwriting files
- run as ROOTFS_POSTPROCESS_COMMAND instead

 meta/classes/image-bootfiles.bbclass | 41 ++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 meta/classes/image-bootfiles.bbclass
meta/classes/image-bootfiles.bbclass new file +41 -0
new file mode 100644
index 0000000000..a17c92f66b
@@ -0,0 +1,41 @@
+#
+# SPDX-License-Identifier: MIT
+#
+# Copyright (C) 2024 Marcus Folkesson
+# Author: Marcus Folkesson <[email protected]>
+#
+# Writes IMAGE_BOOT_FILES to the IMAGE_BOOT_FILES_DIR directory.
+#
+# Usage: add "inherit image-bootfiles" to your image.
+#
+
+IMAGE_BOOT_FILES_DIR ?= "boot"
+
+python bootfiles_populate() {
+    import shutil
+    from oe.bootfiles import get_boot_files
+
+    deploy_image_dir = d.getVar("DEPLOY_DIR_IMAGE")
+    boot_dir = os.path.join(d.getVar("IMAGE_ROOTFS"), d.getVar("IMAGE_BOOT_FILES_DIR"))
+
+    boot_files = d.getVar("IMAGE_BOOT_FILES")
+    if boot_files is None:
+        return
+
+    install_files = get_boot_files(deploy_image_dir, boot_files)
+    if not install_files:
+        bb.warn("Could not find any boot files to install even though IMAGE_BOOT_FILES is not empty")
+        return
+
+    os.makedirs(boot_dir, exist_ok=True)
+    for src, dst  in install_files:
+        image_src = os.path.join(deploy_image_dir, src)
+        image_dst = os.path.join(boot_dir, dst)
+        if os.path.exists(image_dst):
+            bb.warn("%s does already exist and will be overwritten" % image_dst)
+
+        os.makedirs(os.path.dirname(image_dst), exist_ok=True)
+        shutil.copyfile(image_src, image_dst)
+}
+
+ROOTFS_POSTPROCESS_COMMAND += "bootfiles_populate;"
Signature · 1 line
2.45.1

A message that is not in the archive (sent off-list or not yet received): [email protected]

author Reviewed-by Quentin Schulz
#4 lore raw

Re: [OE-core] [PATCH v5 2/2] image-bootfiles.bbclass: new class, copy boot files to root filesystem

Quoted 7 lines · Marcus Folkesson via lists.openembedded.org

image-bootfiles class copy files listed in IMAGE_BOOT_FILES to the IMAGE_BOOT_FILES_DIR directory of the root filesystem.

This is useful when there is no explicit boot partition but all boot files should instead reside inside the root filesystem.

Sorry, I forgot the Reviewed-by tag from v4:

#5 lore raw
In reply to Marcus Folkesson

Hi all,

Quoted 34 lines · Marcus Folkesson

The image-bootfiles class is used to put all files listed in IMAGE_BOOT_FILES into the root filesystem.

IMAGE_BOOT_FILES is used by the bootimg-partition wic plugin to put the files into a boot partition.
Be able to list files as "boot files" in e.g. your .conf or image files instead of install those in every recipe is a good thing.

It is not always desired to have a separate boot partition for boot files. Sometimes it could be good to have them as a part of the root filesystem.

For example, if a double copy strategy is used for update the system, then you probably want to update both the boot files and root filesystem at the same time as there may be dependencies.

v2:
- Removed the documentation from the patch series (will be submitted later)
- Break out the parts in bootimg-partition that is used by image-bootfiles to a common library
- Make the destination directory in root filesystem configurable
v3:
- See changelog in patches

v4:
- See changelog in patches

v5:
- See changelog in patches

Marcus Folkesson (2):
bootimg-partition: break out code to a common library. image-bootfiles.bbclass: new class, copy boot files to root filesystem

Quoted 10 lines
 meta/classes/image-bootfiles.bbclass          | 41 +++++++++++++
 meta/lib/oe/bootfiles.py                      | 57 +++++++++++++++++++
 .../wic/plugins/source/bootimg-partition.py   | 39 +------------
 3 files changed, 100 insertions(+), 37 deletions(-)
 create mode 100644 meta/classes/image-bootfiles.bbclass
 create mode 100644 meta/lib/oe/bootfiles.py
Signature · 1 line
2.45.1

Any more thoughts about these patches?

Thank you,
Marcus Folkesson

Reviewed-by
#6 lore raw
Quoted 45 lines · Marcus Folkesson

Hi all,

Quoted 41 lines · Marcus Folkesson

The image-bootfiles class is used to put all files listed in IMAGE_BOOT_FILES into the root filesystem.

IMAGE_BOOT_FILES is used by the bootimg-partition wic plugin to put the files into a boot partition.
Be able to list files as "boot files" in e.g. your .conf or image files instead of install those in every recipe is a good thing.

It is not always desired to have a separate boot partition for boot files. Sometimes it could be good to have them as a part of the root filesystem.

For example, if a double copy strategy is used for update the system, then you probably want to update both the boot files and root filesystem at the same time as there may be dependencies.

v2:
- Removed the documentation from the patch series (will be submitted later)
- Break out the parts in bootimg-partition that is used by image-bootfiles to a common library
- Make the destination directory in root filesystem configurable
v3:
- See changelog in patches

v4:
- See changelog in patches

v5:
- See changelog in patches

Marcus Folkesson (2):
bootimg-partition: break out code to a common library. image-bootfiles.bbclass: new class, copy boot files to root filesystem

  meta/classes/image-bootfiles.bbclass          | 41 +++++++++++++
  meta/lib/oe/bootfiles.py                      | 57 +++++++++++++++++++
  .../wic/plugins/source/bootimg-partition.py   | 39 +------------
  3 files changed, 100 insertions(+), 37 deletions(-)

create mode 100644 meta/classes/image-bootfiles.bbclass create mode 100644 meta/lib/oe/bootfiles.py

Quoted 8 lines
Quoted 3 lines
Signature · 1 line
2.45.1

Any more thoughts about these patches?

Thank you,
Marcus Folkesson

LGTM