Input: ati-remote2 - use driver core to instantiate device attributes

PATCH In review Dmitry Torokhov 3 participants 3 messages Jul 10, 2024 – Jul 11, 2024

Subsystems (3)

HID Input drivers ATI_REMOTE2 driver

lore

Share & tools

lore

Dmitry Torokhov

author maintainer

2024-07-10 23:59 UTC #0 lore raw

PATCH 1/1 Input: ati-remote2 - use driver core to instantiate device attributes

Instead of manually creating driver-specific device attributes set struct usb_driver->dev_groups pointer to have the driver core do it.

Signed-off-by Dmitry Torokhov <[email protected]>

---
 drivers/input/misc/ati_remote2.c | 50 +++++++++++---------------------
 1 file changed, 17 insertions(+), 33 deletions(-)

drivers/input/misc/ati_remote2.c +17 ~~-33~~

index 946bf75aa106..795f69edb4b2 100644
@@ -204,26 +204,7 @@ struct ati_remote2 {
 	unsigned int mode_mask;
 };
 
-static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
-static void ati_remote2_disconnect(struct usb_interface *interface);
-static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
-static int ati_remote2_resume(struct usb_interface *interface);
-static int ati_remote2_reset_resume(struct usb_interface *interface);
-static int ati_remote2_pre_reset(struct usb_interface *interface);
-static int ati_remote2_post_reset(struct usb_interface *interface);
-
-static struct usb_driver ati_remote2_driver = {
-	.name       = "ati_remote2",
-	.probe      = ati_remote2_probe,
-	.disconnect = ati_remote2_disconnect,
-	.id_table   = ati_remote2_id_table,
-	.suspend    = ati_remote2_suspend,
-	.resume     = ati_remote2_resume,
-	.reset_resume = ati_remote2_reset_resume,
-	.pre_reset  = ati_remote2_pre_reset,
-	.post_reset = ati_remote2_post_reset,
-	.supports_autosuspend = 1,
-};
+static struct usb_driver ati_remote2_driver;
 
 static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
 {

@@ -791,10 +772,7 @@ static struct attribute *ati_remote2_attrs[] = {
 	&dev_attr_mode_mask.attr,
 	NULL,
 };
-
-static struct attribute_group ati_remote2_attr_group = {
-	.attrs = ati_remote2_attrs,
-};
+ATTRIBUTE_GROUPS(ati_remote2);
 
 static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
 {

@@ -861,13 +839,9 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d
 
 	strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
 
-	r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
-	if (r)
-		goto fail3;
-
 	r = ati_remote2_input_init(ar2);
 	if (r)
-		goto fail4;
+		goto fail3;
 
 	usb_set_intfdata(interface, ar2);

@@ -875,8 +849,6 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d
 
 	return 0;
 
- fail4:
-	sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
  fail3:
 	ati_remote2_urb_cleanup(ar2);
  fail2:

@@ -900,8 +872,6 @@ static void ati_remote2_disconnect(struct usb_interface *interface)
 
 	input_unregister_device(ar2->idev);
 
-	sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
-
 	ati_remote2_urb_cleanup(ar2);
 
 	usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);

@@ -1032,4 +1002,18 @@ static int ati_remote2_post_reset(struct usb_interface *interface)
 	return r;
 }
 
+static struct usb_driver ati_remote2_driver = {
+	.name       = "ati_remote2",
+	.probe      = ati_remote2_probe,
+	.disconnect = ati_remote2_disconnect,
+	.dev_groups = ati_remote2_groups,
+	.id_table   = ati_remote2_id_table,
+	.suspend    = ati_remote2_suspend,
+	.resume     = ati_remote2_resume,
+	.reset_resume = ati_remote2_reset_resume,
+	.pre_reset  = ati_remote2_pre_reset,
+	.post_reset = ati_remote2_post_reset,
+	.supports_autosuspend = 1,
+};
+
 module_usb_driver(ati_remote2_driver);

Signature · 5 lines

2.45.2.803.g4e1b14247a-goog


-- 
Dmitry

Greg Kroah-Hartman

Reviewed-by on v1 1/1

2024-07-11 07:43 UTC #1 lore raw

Quoted 5 lines · Dmitry Torokhov

Instead of manually creating driver-specific device attributes set struct usb_driver->dev_groups pointer to have the driver core do it.
Signed-off-by Dmitry Torokhov <[email protected]>

Reviewed-by Greg Kroah-Hartman <[email protected]>

Ville Syrjälä

maintainer Reviewed-by on v1 1/1

2024-07-11 16:19 UTC #2 lore raw

In reply to Dmitry Torokhov

Quoted 28 lines · Dmitry Torokhov

Instead of manually creating driver-specific device attributes set struct usb_driver->dev_groups pointer to have the driver core do it.

Signed-off-by Dmitry Torokhov <[email protected]>

---
 drivers/input/misc/ati_remote2.c | 50 +++++++++++---------------------
 1 file changed, 17 insertions(+), 33 deletions(-)

drivers/input/misc/ati_remote2.c +0 ~~-11~~

index 946bf75aa106..795f69edb4b2 100644
@@ -204,26 +204,7 @@ struct ati_remote2 {
 	unsigned int mode_mask;
 };
 
-static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
-static void ati_remote2_disconnect(struct usb_interface *interface);
-static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
-static int ati_remote2_resume(struct usb_interface *interface);
-static int ati_remote2_reset_resume(struct usb_interface *interface);
-static int ati_remote2_pre_reset(struct usb_interface *interface);
-static int ati_remote2_post_reset(struct usb_interface *interface);
-
-static struct usb_driver ati_remote2_driver = {
-	.name       = "ati_remote2",
-	.probe      = ati_remote2_probe,

drivers/input/misc/ati_remote2.c struct ati_remote2 { · line 207

Quoted 10 lines

drivers/input/misc/ati_remote2.c +1 -9

-	.disconnect = ati_remote2_disconnect,
-	.id_table   = ati_remote2_id_table,
-	.suspend    = ati_remote2_suspend,
-	.resume     = ati_remote2_resume,
-	.reset_resume = ati_remote2_reset_resume,
-	.pre_reset  = ati_remote2_pre_reset,
-	.post_reset = ati_remote2_post_reset,
-	.supports_autosuspend = 1,
-};
+static struct usb_driver ati_remote2_driver;

Would be easier to see what's actually happening if the rearrangement of the forward declarations was a separate patch.

Otherwise lgtm

Reviewed-by Ville Syrjälä <[email protected]>

Quoted 73 lines

drivers/input/misc/ati_remote2.c +16 ~~-13~~

 static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
 {

@@ -791,10 +772,7 @@ static struct attribute *ati_remote2_attrs[] = {
 	&dev_attr_mode_mask.attr,
 	NULL,
 };
-
-static struct attribute_group ati_remote2_attr_group = {
-	.attrs = ati_remote2_attrs,
-};
+ATTRIBUTE_GROUPS(ati_remote2);
 
 static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
 {

@@ -861,13 +839,9 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d
 
 	strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
 
-	r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
-	if (r)
-		goto fail3;
-
 	r = ati_remote2_input_init(ar2);
 	if (r)
-		goto fail4;
+		goto fail3;
 
 	usb_set_intfdata(interface, ar2);

@@ -875,8 +849,6 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d
 
 	return 0;
 
- fail4:
-	sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
  fail3:
 	ati_remote2_urb_cleanup(ar2);
  fail2:

@@ -900,8 +872,6 @@ static void ati_remote2_disconnect(struct usb_interface *interface)
 
 	input_unregister_device(ar2->idev);
 
-	sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
-
 	ati_remote2_urb_cleanup(ar2);
 
 	usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);

@@ -1032,4 +1002,18 @@ static int ati_remote2_post_reset(struct usb_interface *interface)
 	return r;
 }
 
+static struct usb_driver ati_remote2_driver = {
+	.name       = "ati_remote2",
+	.probe      = ati_remote2_probe,
+	.disconnect = ati_remote2_disconnect,
+	.dev_groups = ati_remote2_groups,
+	.id_table   = ati_remote2_id_table,
+	.suspend    = ati_remote2_suspend,
+	.resume     = ati_remote2_resume,
+	.reset_resume = ati_remote2_reset_resume,
+	.pre_reset  = ati_remote2_pre_reset,
+	.post_reset = ati_remote2_post_reset,
+	.supports_autosuspend = 1,
+};
+
 module_usb_driver(ati_remote2_driver);

Signature · 5 lines

2.45.2.803.g4e1b14247a-goog


-- 
Dmitry

Signature · 3 lines

Ville Syrjälä
[email protected]
http://www.sci.fi/~syrjala/