mfd: ds1wm: remove remaining header
PATCH 1/1 mfd: ds1wm: remove remaining header
The driver was removed after kernel 6.2, keeping the header around doesn't make much sense.
Signed-off-by Wilken Gottwalt <[email protected]>
--- include/linux/mfd/ds1wm.h | 29 ----------------------------- 1 file changed, 29 deletions(-) delete mode 100644 include/linux/mfd/ds1wm.h
include/linux/mfd/ds1wm.h deleted +0 -29
@@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* MFD cell driver data for the DS1WM driver -* -* to be defined in the MFD device that is -* using this driver for one of his sub devices -*/ - -struct ds1wm_driver_data { -int active_high; -int clock_rate; -/* in milliseconds, the amount of time to -* sleep following a reset pulse. Zero -* should work if your bus devices recover -* time respects the 1-wire spec since the -* ds1wm implements the precise timings of -* a reset pulse/presence detect sequence. -*/ -unsigned int reset_recover_delay; - -/* Say 1 here for big endian Hardware -* (only relevant with bus-shift > 0 -*/ -bool is_hw_big_endian; - -/* left shift of register number to get register address offsett. -* Only 0,1,2 allowed for 8,16 or 32 bit bus width respectively -*/ -unsigned int bus_shift; -};
Signature · 1 line
2.45.2
Re: (subset) [PATCH] mfd: ds1wm: remove remaining header
Quoted 4 lines · Wilken Gottwalt
The driver was removed after kernel 6.2, keeping the header around doesn't make much sense.
Applied, thanks!
[1/1] mfd: ds1wm: remove remaining header
commit: c8f7a8fdd49b75a8c9e2752a20e723b697b8b504
--
Lee Jones [李琼斯]