spi: pxa2xx: Fix module reloading failure
Subsystems (3)
Andy Shevchenko
reviewercover spi: pxa2xx: Fix module reloading failure
After splitting platform and reworking PCI drivers the module reloading became broken as reported by Hao. Here is the patch to fix that along with another one that fixes PM runtime workflow differences between the busses (PCI vs. platform).
This is material for v6.11 as the initial work landed there and we still have time to fix it before the release.
Andy Shevchenko (2):
spi: pxa2xx: Do not override dev->platform_data on probe
spi: pxa2xx: Move PM runtime handling to the glue drivers
drivers/spi/spi-pxa2xx-pci.c | 15 ++++++++++++++- drivers/spi/spi-pxa2xx-platform.c | 26 +++++++++++++++++++++----- drivers/spi/spi-pxa2xx.c | 20 +++----------------- drivers/spi/spi-pxa2xx.h | 3 ++- 4 files changed, 40 insertions(+), 24 deletions(-)
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
Andy Shevchenko
reviewerPATCH 1/2 spi: pxa2xx: Do not override dev->platform_data on probe
The platform_data field may be supplied by legacy board code. In other cases we override it, and module remove and probe cycle will crash the kernel since it will carry a stale pointer.
Fix this by supplying a third argument to the pxa2xx_spi_probe() and avoid overriding dev->platform_data.
--- drivers/spi/spi-pxa2xx-pci.c | 2 +- drivers/spi/spi-pxa2xx-platform.c | 6 ++---- drivers/spi/spi-pxa2xx.c | 5 ++--- drivers/spi/spi-pxa2xx.h | 3 ++- 4 files changed, 7 insertions(+), 9 deletions(-)
drivers/spi/spi-pxa2xx-pci.c +1 -1
@@ -297,7 +297,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,return ret; ssp->irq =pci_irq_vector (dev,0 ); -return pxa2xx_spi_probe (&dev->dev, ssp); +return pxa2xx_spi_probe (&dev->dev, ssp, pdata); }static void pxa2xx_spi_pci_remove (struct pci_dev *dev)
drivers/spi/spi-pxa2xx-platform.c +2 -4
@@ -63,7 +63,7 @@ static struct ssp_device *pxa2xx_spi_ssp_request(struct platform_device *pdev) ssp =pxa_ssp_request (pdev->id, pdev->name);if (!ssp) -return ssp; +return NULL ; status =devm_add_action_or_reset (&pdev->dev, pxa2xx_spi_ssp_release, ssp);if (status)
@@ -148,8 +148,6 @@ static int pxa2xx_spi_platform_probe(struct platform_device *pdev) platform_info =pxa2xx_spi_init_pdata (pdev);if (IS_ERR (platform_info))return dev_err_probe (dev,PTR_ERR (platform_info),"missing platform data\n" ); - - dev->platform_data = platform_info; } ssp =pxa2xx_spi_ssp_request (pdev);
@@ -158,7 +156,7 @@ static int pxa2xx_spi_platform_probe(struct platform_device *pdev)if (!ssp) ssp = &platform_info->ssp; -return pxa2xx_spi_probe (dev, ssp); +return pxa2xx_spi_probe (dev, ssp, platform_info); }static void pxa2xx_spi_platform_remove (struct platform_device *pdev)
drivers/spi/spi-pxa2xx.c +2 -3
@@ -1277,16 +1277,15 @@ static size_t pxa2xx_spi_max_dma_transfer_size(struct spi_device *spi)return MAX_DMA_LEN ; } -int pxa2xx_spi_probe (struct device *dev,struct ssp_device *ssp) +int pxa2xx_spi_probe (struct device *dev,struct ssp_device *ssp, +struct pxa2xx_spi_controller *platform_info) { -struct pxa2xx_spi_controller *platform_info;struct spi_controller *controller;struct driver_data *drv_data;const struct lpss_config *config;int status;u32 tmp; - platform_info =dev_get_platdata (dev);if (platform_info->is_target) controller =devm_spi_alloc_target (dev,sizeof (*drv_data));else
drivers/spi/spi-pxa2xx.h +2 -1
@@ -132,7 +132,8 @@ extern void pxa2xx_spi_dma_stop(struct driver_data *drv_data);extern int pxa2xx_spi_dma_setup (struct driver_data *drv_data);extern void pxa2xx_spi_dma_release (struct driver_data *drv_data); -int pxa2xx_spi_probe (struct device *dev,struct ssp_device *ssp); +int pxa2xx_spi_probe (struct device *dev,struct ssp_device *ssp, +struct pxa2xx_spi_controller *platform_info);void pxa2xx_spi_remove (struct device *dev);extern const struct dev_pm_ops pxa2xx_spi_pm_ops;
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
RE: [PATCH v1 1/2] spi: pxa2xx: Do not override dev->platform_data on probe
Hi,Andriy,
I merged following patches and tested it works.
[PATCH v1 1/2] spi: pxa2xx: Do not override dev->platform_data on probe [PATCH v1 2/2] spi: pxa2xx: Move PM runtime handling to the glue drivers
Best Regards!
==========================================
Quoted 104 lines
-----Original Message-----
From: Andy Shevchenko <[email protected]>
Sent: Thursday, August 22, 2024 7:31 PM
To: Andy Shevchenko <[email protected]>; Mark Brown <[email protected]>; Linus Walleij <[email protected]>; [email protected]; [email protected]; [email protected]
Cc: Daniel Mack <[email protected]>; Haojian Zhuang <[email protected]>; Robert Jarzmik <[email protected]>; Ma, Hao <[email protected]>
Subject: [PATCH v1 1/2] spi: pxa2xx: Do not overridedev->platform_dataon probeThe
platform_datafield may be supplied by legacy board code.
In other cases we override it, and module remove and probe cycle will crash the kernel since it will carry a stale pointer.Fix this by supplying a third argument to the
pxa2xx_spi_probe()and avoid overridingdev->platform_data.Reported-by Hao Ma <[email protected]>Fixes cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")Fixes 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file")Fixes 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")Signed-off-by Andy Shevchenko <[email protected]>--- drivers/spi/spi-pxa2xx-pci.c | 2 +- drivers/spi/spi-pxa2xx-platform.c | 6 ++---- drivers/spi/spi-pxa2xx.c | 5 ++--- drivers/spi/spi-pxa2xx.h | 3 ++- 4 files changed, 7 insertions(+), 9 deletions(-)drivers/spi/spi-pxa2xx-pci.c +1
-1@@ -297,7 +297,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,return ret; ssp->irq =pci_irq_vector (dev,0 ); -return pxa2xx_spi_probe (&dev->dev, ssp); +return pxa2xx_spi_probe (&dev->dev, ssp, pdata); } static void pxa2xx_spi_pci_remove(struct pci_dev *dev) diff --git a/drivers/spi/spi-pxa2xx-platform.c b/drivers/spi/spi-pxa2xx-platform.cindex
98a8ceb7db6f..f9504cddc7ba100644drivers/spi/spi-pxa2xx-platform.c +2
-4@@ -63,7 +63,7 @@ static struct ssp_device *pxa2xx_spi_ssp_request(struct platform_device *pdev) ssp =pxa_ssp_request (pdev->id, pdev->name);if (!ssp) -return ssp; +return NULL ; status =devm_add_action_or_reset (&pdev->dev, pxa2xx_spi_ssp_release, ssp);if (status)@@ -148,8 +148,6 @@ static int pxa2xx_spi_platform_probe(struct platform_device *pdev) platform_info =pxa2xx_spi_init_pdata (pdev);if (IS_ERR (platform_info))return dev_err_probe (dev,PTR_ERR (platform_info),"missing platform data\n" ); - - dev->platform_data = platform_info; } ssp =pxa2xx_spi_ssp_request (pdev);@@ -158,7 +156,7 @@ static int pxa2xx_spi_platform_probe(struct platform_device *pdev)if (!ssp) ssp = &platform_info->ssp; -return pxa2xx_spi_probe (dev, ssp); +return pxa2xx_spi_probe (dev, ssp, platform_info); } static void pxa2xx_spi_platform_remove(struct platform_device *pdev) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index
16b96eb176cd..e3a95adc5279100644drivers/spi/spi-pxa2xx.c +2
-3@@ -1277,16 +1277,15 @@ static size_t pxa2xx_spi_max_dma_transfer_size(struct spi_device *spi)return MAX_DMA_LEN ; } -int pxa2xx_spi_probe (struct device *dev,struct ssp_device *ssp) +int pxa2xx_spi_probe (struct device *dev,struct ssp_device *ssp, +struct pxa2xx_spi_controller *platform_info) { -struct pxa2xx_spi_controller *platform_info;struct spi_controller *controller;struct driver_data *drv_data;const struct lpss_config *config;int status;u32 tmp; - platform_info =dev_get_platdata (dev);if (platform_info->is_target) controller =devm_spi_alloc_target (dev,sizeof (*drv_data));else drivers/spi/spi-pxa2xx.h +2
-2@@ -132,7 +132,8 @@ extern void pxa2xx_spi_dma_stop(struct driver_data *drv_data); extern int pxa2xx_spi_dma_setup(struct driver_data *drv_data); extern void pxa2xx_spi_dma_release(struct driver_data *drv_data); -int pxa2xx_spi_probe (struct device *dev,struct ssp_device *ssp); +int pxa2xx_spi_probe (struct device *dev,struct ssp_device *ssp, +struct pxa2xx_spi_controller *platform_info);void pxa2xx_spi_remove (struct device *dev);extern const struct dev_pm_ops pxa2xx_spi_pm_ops; --2.43.0.rc1.1336.g36b5255a03ac
Andy Shevchenko
reviewerRe: [PATCH v1 1/2] spi: pxa2xx: Do not override dev->platform_data on probe
Quoted 8 lines · Hao
Hi,Andriy,
I merged following patches and tested it works.
[PATCH v1 1/2] spi: pxa2xx: Do not override
dev->platform_dataon probe [PATCH v1 2/2] spi: pxa2xx: Move PM runtime handling to the glue driversTested-by Hao Ma <[email protected] >
Thank you for confirming that it works!
Signature · 2 lines
With Best Regards, Andy Shevchenko
Andy Shevchenko
reviewerPATCH 2/2 spi: pxa2xx: Move PM runtime handling to the glue drivers
In reply to Andy ShevchenkoPCI and platform buses have different defaults for runtime PM. In particular PCI probe is assumed to be called when PM runtime is enabled by the PCI core. In this case if we try enable it again the PM runtime complaints with
pxa2xx_spi_pci 0000:00:07.0: Unbalanced pm_runtime_enable!
Fix this by moving PM runtime handling from the SPI PXA2xx core to the glue drivers.
--- drivers/spi/spi-pxa2xx-pci.c | 15 ++++++++++++++- drivers/spi/spi-pxa2xx-platform.c | 22 ++++++++++++++++++++-- drivers/spi/spi-pxa2xx.c | 15 +-------------- 3 files changed, 35 insertions(+), 17 deletions(-)
drivers/spi/spi-pxa2xx-pci.c +14 -1
@@ -11,6 +11,7 @@#include <linux/module.h> #include <linux/pci.h> #include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/sprintf.h> #include <linux/string.h> #include <linux/types.h>
@@ -297,11 +298,23 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,return ret; ssp->irq =pci_irq_vector (dev,0 ); -return pxa2xx_spi_probe (&dev->dev, ssp, pdata); + ret =pxa2xx_spi_probe (&dev->dev, ssp, pdata); +if (ret) +return ret; + +pm_runtime_set_autosuspend_delay (&dev->dev,50 ); +pm_runtime_use_autosuspend (&dev->dev); +pm_runtime_put_autosuspend (&dev->dev); +pm_runtime_allow (&dev->dev); + +return 0 ; }static void pxa2xx_spi_pci_remove (struct pci_dev *dev) { +pm_runtime_forbid (&dev->dev); +pm_runtime_get_noresume (&dev->dev); +pxa2xx_spi_remove (&dev->dev); }
drivers/spi/spi-pxa2xx-platform.c +20 -2
@@ -7,6 +7,7 @@#include <linux/init.h> #include <linux/mod_devicetable.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/property.h> #include <linux/types.h>
@@ -142,6 +143,7 @@ static int pxa2xx_spi_platform_probe(struct platform_device *pdev)struct pxa2xx_spi_controller *platform_info;struct device *dev = &pdev->dev;struct ssp_device *ssp; +int ret; platform_info =dev_get_platdata (dev);if (!platform_info) {
@@ -156,12 +158,28 @@ static int pxa2xx_spi_platform_probe(struct platform_device *pdev)if (!ssp) ssp = &platform_info->ssp; -return pxa2xx_spi_probe (dev, ssp, platform_info); +pm_runtime_set_autosuspend_delay (dev,50 ); +pm_runtime_use_autosuspend (dev); +pm_runtime_set_active (dev); +pm_runtime_enable (dev); + + ret =pxa2xx_spi_probe (dev, ssp, platform_info); +if (ret) +pm_runtime_disable (dev); + +return ret; }static void pxa2xx_spi_platform_remove (struct platform_device *pdev) { -pxa2xx_spi_remove (&pdev->dev); +struct device *dev = &pdev->dev; + +pm_runtime_get_sync (dev); + +pxa2xx_spi_remove (dev); + +pm_runtime_put_noidle (dev); +pm_runtime_disable (dev); }static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
drivers/spi/spi-pxa2xx.c +1 -14
@@ -1449,24 +1449,16 @@ int pxa2xx_spi_probe(struct device *dev, struct ssp_device *ssp, } } -pm_runtime_set_autosuspend_delay (dev,50 ); -pm_runtime_use_autosuspend (dev); -pm_runtime_set_active (dev); -pm_runtime_enable (dev); -/* Register with the SPI framework */ dev_set_drvdata (dev, drv_data); status =spi_register_controller (controller);if (status) {dev_err_probe (dev, status,"problem registering SPI controller\n" ); - goto out_error_pm_runtime_enabled; + goto out_error_clock_enabled; }return status; -out_error_pm_runtime_enabled: -pm_runtime_disable (dev); - out_error_clock_enabled:clk_disable_unprepare (ssp->clk);
@@ -1483,8 +1475,6 @@ void pxa2xx_spi_remove(struct device *dev)struct driver_data *drv_data =dev_get_drvdata (dev);struct ssp_device *ssp = drv_data->ssp; -pm_runtime_get_sync (dev); -spi_unregister_controller (drv_data->controller);/* Disable the SSP at the peripheral and SOC level */
@@ -1495,9 +1485,6 @@ void pxa2xx_spi_remove(struct device *dev)if (drv_data->controller_info->enable_dma)pxa2xx_spi_dma_release (drv_data); -pm_runtime_put_noidle (dev); -pm_runtime_disable (dev); -/* Release IRQ */ free_irq (ssp->irq, drv_data); }
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
Mark Brown
maintainerQuoted 9 lines · Andy Shevchenko
After splitting platform and reworking PCI drivers the module reloading became broken as reported by Hao. Here is the patch to fix that along with another one that fixes PM runtime workflow differences between the busses (PCI vs. platform).
This is material for v6.11 as the initial work landed there and we still have time to fix it before the release.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/2] spi: pxa2xx: Do not override dev->platform_data on probe
commit: 9a8fc292dd93b93db30e01c94c0da4c944852f28
[2/2] spi: pxa2xx: Move PM runtime handling to the glue drivers
commit: e17465f78eb92ebb4be17e35d6c0584406f643a0All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark