net/ice: support for more flexible loading of DDP package
PATCH 1/1 net/ice: support for more flexible loading of DDP package
The "Dynamic Device Personalization" package is loaded at initialization time by the driver, but the specific package file loaded depends upon what package file is found first by searching through a hard-coded list of firmware paths.
To enable greater control over the package loading, this commit two ways to support custom DDP packages:
1. Add device option to choose a specific DDP package file to load. For example:
-a 80:00.0,ddp_pkg_file=/path/to/ice-version.pkg
2. Read firmware search path from "/sys/module/firmware_class/parameters/path" like the kernel behavior.
--- doc/guides/nics/ice.rst | 12 +++++++ drivers/net/ice/ice_ethdev.c | 61 ++++++++++++++++++++++++++++++++++++ drivers/net/ice/ice_ethdev.h | 2 ++ 3 files changed, 75 insertions(+)
doc/guides/nics/ice.rst +12 -0
@@ -108,6 +108,18 @@ Runtime Configuration -a 80:00.0,default-mac-disable=1 +- ``DDP Package File`` + + Rather than have the driver search for the DDP package to load, + or to override what package is used, + the ``ddp_pkg_file`` option can be used to provide the path to a specific package file. + For example:: + + -a 80:00.0,ddp_pkg_file=/path/to/ice-version.pkg + + There is also support for customizing the firmware search path, will read the search path + from "/sys/module/firmware_class/parameters/path" and try to load DDP package. + - ``Protocol extraction for per queue`` Configure the RX queues to do protocol extraction into mbuf for protocol
drivers/net/ice/ice_ethdev.c +61 -0
121 lines not on this page · raw message
drivers/net/ice/ice_ethdev.h +2 -0
@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256
@@ -568,6 +569,7 @@ struct ice_devargs {/* Name of the field. */ char xtr_field_name[RTE_MBUF_DYN_NAMESIZE ];uint64_t mbuf_check; +const char *ddp_filename; };/**
Signature · 1 line
2.34.1
Quoted 9 lines · Zhichao Zeng
The "Dynamic Device Personalization" package is loaded at initialization time by the driver, but the specific package file loaded depends upon what package file is found first by searching through a hard-coded list of firmware paths.
To enable greater control over the package loading, this commit two ways to support custom DDP packages:
1. Add device option to choose a specific DDP package file to load. For example:
Quoted 6 lines
-a 80:00.0,ddp_pkg_file=/path/to/ice-version.pkg2. Read firmware search path from "
/sys/module/firmware_class/parameters/path" like the kernel behavior.Signed-off-by Bruce Richardson <[email protected]>Signed-off-by Zhichao Zeng <[email protected]>
Hi Zhichao,
since there are two different methods being supported for picking a DDP package this patch would be better split into two, one for each method added.
The support for #1 above is already on-list as a standalone patch[1], so you really only need to do a new patch for #2 above. However, I'm ok for you to take my patch and include it in a 2-patch set for this if you prefer, since both patches will be related to choosing a DDP file. I'll leave it up to you whether v2 is a single patch for the search path, or a 2-patch set including [1].
Regards,
/Bruce
[1] https://patches.dpdk.org/project/dpdk/patch/[email protected]/
Quoted 186 lines
--- doc/guides/nics/ice.rst | 12 +++++++ drivers/net/ice/ice_ethdev.c | 61 ++++++++++++++++++++++++++++++++++++ drivers/net/ice/ice_ethdev.h | 2 ++ 3 files changed, 75 insertions(+)doc/guides/nics/ice.rst +12
-0@@ -108,6 +108,18 @@ Runtime Configuration -a 80:00.0,default-mac-disable=1 +- ``DDP Package File`` + + Rather than have the driver search for the DDP package to load, + or to override what package is used, + the ``ddp_pkg_file`` option can be used to provide the path to a specific package file. + For example:: + + -a 80:00.0,ddp_pkg_file=/path/to/ice-version.pkg + + There is also support for customizing the firmware search path, will read the search path + from "/sys/module/firmware_class/parameters/path" and try to load DDP package. + - ``Protocol extraction for per queue`` Configure the RX queues to do protocol extraction into mbuf for protocoldrivers/net/ice/ice_ethdev.c +61
-0@@ -36,6 +36,7 @@#define ICE_ONE_PPS_OUT_ARG "pps_out"#define ICE_RX_LOW_LATENCY_ARG "rx_low_latency"#define ICE_MBUF_CHECK_ARG "mbuf_check" +#define ICE_DDP_FILENAME "ddp_pkg_file"#define ICE_CYCLECOUNTER_MASK 0xffffffffffffffffULL@@ -52,6 +53,7 @@ static const char * const ice_valid_args[] = {ICE_RX_LOW_LATENCY_ARG ,ICE_DEFAULT_MAC_DISABLE ,ICE_MBUF_CHECK_ARG , +ICE_DDP_FILENAME , NULL };@@ -692,6 +694,18 @@ handle_field_name_arg(__rte_unused const char *key, const char *value,return 0 ; } +static int +handle_ddp_filename_arg(__rte_unused const char *key, const char *value, void *name_args) +{ +const char **filename = name_args; +if (strlen (value) >=ICE_MAX_PKG_FILENAME_SIZE ) { +PMD_DRV_LOG (ERR ,"The DDP package filename is too long : '%s'" , value); +return -1 ; + } + *filename =strdup (value); +return 0 ; +} +static void ice_check_proto_xtr_support (struct ice_hw *hw) {@@ -1873,6 +1887,22 @@ ice_load_pkg_type(struct ice_hw *hw)return package_type; } +static int ice_read_customized_path (char *pkg_file) +{ +char buf[ICE_MAX_PKG_FILENAME_SIZE ]; +FILE *fp =fopen (ICE_PKG_FILE_CUSTOMIZED_PATH ,"r" ); +if (fp ==NULL ) { +PMD_INIT_LOG (ERR ,"Failed to read CUSTOMIZED_PATH" ); +return -EIO ; + } +if (fscanf (fp,"%s\n" , buf) >0 ) +strncpy (pkg_file, buf,ICE_MAX_PKG_FILENAME_SIZE ); +else +return -EIO ; + +return 0 ; +} +int ice_load_pkg (struct ice_adapter *adapter,bool use_dsn,uint64_t dsn) {struct ice_hw *hw = &adapter->hw;@@ -1882,12 +1912,28 @@ int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn)size_t bufsz;int err; +if (adapter->devargs.ddp_filename !=NULL ) { +strlcpy (pkg_file, adapter->devargs.ddp_filename,sizeof (pkg_file)); +if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) { + goto load_fw; + }else { +PMD_INIT_LOG (ERR ,"Cannot load DDP file: %s\n" , pkg_file); +return -1 ; + } + } +if (!use_dsn) goto no_dsn;memset (opt_ddp_filename,0 ,ICE_MAX_PKG_FILENAME_SIZE );snprintf (opt_ddp_filename,ICE_MAX_PKG_FILENAME_SIZE ,"ice-%016" PRIx64".pkg" , dsn); + +ice_read_customized_path (pkg_file); +strcat (pkg_file, opt_ddp_filename); +if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; +strncpy (pkg_file,ICE_PKG_FILE_SEARCH_PATH_UPDATES ,ICE_MAX_PKG_FILENAME_SIZE );strcat (pkg_file, opt_ddp_filename);@@ -1901,6 +1947,10 @@ int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn) goto load_fw; no_dsn: +ice_read_customized_path (pkg_file); +if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; +strncpy (pkg_file,ICE_PKG_FILE_UPDATES ,ICE_MAX_PKG_FILENAME_SIZE );if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) goto load_fw;@@ -2217,6 +2267,14 @@ static int ice_parse_devargs(struct rte_eth_dev *dev) ret =rte_kvargs_process (kvlist,ICE_RX_LOW_LATENCY_ARG , &parse_bool, &ad->devargs.rx_low_latency); +if (ret) + goto bail; + + ret =rte_kvargs_process (kvlist,ICE_DDP_FILENAME , + &handle_ddp_filename_arg, &ad->devargs.ddp_filename); +if (ret) + goto bail; + bail:rte_kvargs_free (kvlist);return ret;@@ -2689,6 +2747,8 @@ ice_dev_close(struct rte_eth_dev *dev)ice_free_hw_tbls (hw);rte_free (hw->port_info); hw->port_info =NULL ; +free ((void *)(uintptr_t )ad->devargs.ddp_filename); + ad->devargs.ddp_filename =NULL ;ice_shutdown_all_ctrlq (hw, true);rte_free (pf->proto_xtr); pf->proto_xtr =NULL ;@@ -6981,6 +7041,7 @@ RTE_PMD_REGISTER_PARAM_STRING(net_ice,ICE_PROTO_XTR_ARG "=[queue:]<vlan|ipv4|ipv6|ipv6_flow|tcp|ip_offset>" ICE_SAFE_MODE_SUPPORT_ARG "=<0|1>" ICE_DEFAULT_MAC_DISABLE "=<0|1>" +ICE_DDP_FILENAME "=</path/to/file>" ICE_RX_LOW_LATENCY_ARG "=<0|1>");RTE_LOG_REGISTER_SUFFIX (ice_logtype_init, init,NOTICE );drivers/net/ice/ice_ethdev.h +2
-0@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256@@ -568,6 +569,7 @@ struct ice_devargs {/* Name of the field. */ char xtr_field_name[RTE_MBUF_DYN_NAMESIZE ];uint64_t mbuf_check; +const char *ddp_filename; };/** Signature · 1 line
2.34.1
Quoted 37 lines
-----Original Message-----
From: Richardson, Bruce <[email protected]>
Sent: Wednesday, August 28, 2024 3:55 PM
To: Zeng, ZhichaoX <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH] net/ice: support for more flexible loading of DDP packageQuoted 9 lines · Zhichao Zeng
The "Dynamic Device Personalization" package is loaded at initialization time by the driver, but the specific package file loaded depends upon what package file is found first by searching through a hard-coded list of firmware paths.
To enable greater control over the package loading, this commit two ways to support custom DDP packages:
1. Add device option to choose a specific DDP package file to load. For example:Quoted 6 lines
-a 80:00.0,ddp_pkg_file=/path/to/ice-version.pkg2. Read firmware search path from "
/sys/module/firmware_class/parameters/path" like the kernel behavior.Signed-off-by Bruce Richardson <[email protected]>Signed-off-by Zhichao Zeng <[email protected]>Hi Zhichao,
since there are two different methods being supported for picking a DDP package this patch would be better split into two, one for each method added.
The support for #1 above is already on-list as a standalone patch[1], so you really only need to do a new patch for #2 above. However, I'm ok for you to take my patch and include it in a 2-patch set for this if you prefer, since both patches will be related to choosing a DDP file. I'll leave it up to you whether v2 is a single patch for the search path, or a 2-patch set including [1].
Quoted 7 lines
Regards,
/Bruce[1]
https://patches.dpdk.org/project/dpdk/patch/20240812152815.1132697-
[email protected]/
Hi Bruce,
Thanks for your comments, sorry I didn't check the patchwork and didn't notice that #1 had been submitted, I'll rework the patch for #2 separately, thanks.
Regards
Zhichao
Quoted 7 lines
Quoted 7 lines
--- doc/guides/nics/ice.rst | 12 +++++++ drivers/net/ice/ice_ethdev.c | 61 ++++++++++++++++++++++++++++++++++++ drivers/net/ice/ice_ethdev.h | 2 ++ 3 files changed, 75 insertions(+)
<Snip>
PATCH v2 1/1 net/ice: support customized search path for DDP package
In reply to Zhichao ZengThis patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "/sys/module/firmware_class/parameters/path",
and try to load DDP package.
---
v2: separate the patch and rewrite the log
--- doc/guides/nics/ice.rst | 5 +++++ drivers/net/ice/ice_ethdev.c | 27 +++++++++++++++++++++++++++ drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 33 insertions(+)
doc/guides/nics/ice.rst +5 -0
@@ -108,6 +108,11 @@ Runtime Configuration -a 80:00.0,default-mac-disable=1 +- ``DDP Package File`` + + Support for customizing the firmware search path, will read the search path + from "/sys/module/firmware_class/parameters/path" and try to load DDP package. + - ``Protocol extraction for per queue`` Configure the RX queues to do protocol extraction into mbuf for protocol
drivers/net/ice/ice_ethdev.c +27 -0
@@ -1873,6 +1873,22 @@ ice_load_pkg_type(struct ice_hw *hw)return package_type; } +static int ice_read_customized_path (char *pkg_file) +{ +char buf[ICE_MAX_PKG_FILENAME_SIZE ]; +FILE *fp =fopen (ICE_PKG_FILE_CUSTOMIZED_PATH ,"r" ); +if (fp ==NULL ) { +PMD_INIT_LOG (ERR ,"Failed to read CUSTOMIZED_PATH" ); +return -EIO ; + } +if (fscanf (fp,"%s\n" , buf) >0 ) +strncpy (pkg_file, buf,ICE_MAX_PKG_FILENAME_SIZE ); +else +return -EIO ; + +return 0 ; +} +int ice_load_pkg (struct ice_adapter *adapter,bool use_dsn,uint64_t dsn) {struct ice_hw *hw = &adapter->hw;
@@ -1888,6 +1904,12 @@ int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn)memset (opt_ddp_filename,0 ,ICE_MAX_PKG_FILENAME_SIZE );snprintf (opt_ddp_filename,ICE_MAX_PKG_FILENAME_SIZE ,"ice-%016" PRIx64".pkg" , dsn); + +ice_read_customized_path (pkg_file); +strcat (pkg_file, opt_ddp_filename); +if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; +strncpy (pkg_file,ICE_PKG_FILE_SEARCH_PATH_UPDATES ,ICE_MAX_PKG_FILENAME_SIZE );strcat (pkg_file, opt_ddp_filename);
@@ -1901,6 +1923,10 @@ int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn) goto load_fw; no_dsn: +ice_read_customized_path (pkg_file); +if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; +strncpy (pkg_file,ICE_PKG_FILE_UPDATES ,ICE_MAX_PKG_FILENAME_SIZE );if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) goto load_fw;
@@ -6981,6 +7007,7 @@ RTE_PMD_REGISTER_PARAM_STRING(net_ice,ICE_PROTO_XTR_ARG "=[queue:]<vlan|ipv4|ipv6|ipv6_flow|tcp|ip_offset>" ICE_SAFE_MODE_SUPPORT_ARG "=<0|1>" ICE_DEFAULT_MAC_DISABLE "=<0|1>" +ICE_DDP_FILENAME "=</path/to/file>" ICE_RX_LOW_LATENCY_ARG "=<0|1>");RTE_LOG_REGISTER_SUFFIX (ice_logtype_init, init,NOTICE );
drivers/net/ice/ice_ethdev.h +1 -0
@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256
Signature · 1 line
2.34.1
PATCH v2 1/1 net/ice: support customized search path for DDP package
In reply to Zhichao ZengThis patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "/sys/module/firmware_class/parameters/path",
and try to load DDP package.
---
v2: separate the patch and rewrite the log
--- doc/guides/nics/ice.rst | 5 +++++ drivers/net/ice/ice_ethdev.c | 26 ++++++++++++++++++++++++++ drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 32 insertions(+)
doc/guides/nics/ice.rst +5 -0
@@ -108,6 +108,11 @@ Runtime Configuration -a 80:00.0,default-mac-disable=1 +- ``DDP Package File`` + + Support for customizing the firmware search path, will read the search path + from "/sys/module/firmware_class/parameters/path" and try to load DDP package. + - ``Protocol extraction for per queue`` Configure the RX queues to do protocol extraction into mbuf for protocol
drivers/net/ice/ice_ethdev.c +26 -0
@@ -1873,6 +1873,22 @@ ice_load_pkg_type(struct ice_hw *hw)return package_type; } +static int ice_read_customized_path (char *pkg_file) +{ +char buf[ICE_MAX_PKG_FILENAME_SIZE ]; +FILE *fp =fopen (ICE_PKG_FILE_CUSTOMIZED_PATH ,"r" ); +if (fp ==NULL ) { +PMD_INIT_LOG (ERR ,"Failed to read CUSTOMIZED_PATH" ); +return -EIO ; + } +if (fscanf (fp,"%s\n" , buf) >0 ) +strncpy (pkg_file, buf,ICE_MAX_PKG_FILENAME_SIZE ); +else +return -EIO ; + +return 0 ; +} +int ice_load_pkg (struct ice_adapter *adapter,bool use_dsn,uint64_t dsn) {struct ice_hw *hw = &adapter->hw;
@@ -1888,6 +1904,12 @@ int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn)memset (opt_ddp_filename,0 ,ICE_MAX_PKG_FILENAME_SIZE );snprintf (opt_ddp_filename,ICE_MAX_PKG_FILENAME_SIZE ,"ice-%016" PRIx64".pkg" , dsn); + +ice_read_customized_path (pkg_file); +strcat (pkg_file, opt_ddp_filename); +if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; +strncpy (pkg_file,ICE_PKG_FILE_SEARCH_PATH_UPDATES ,ICE_MAX_PKG_FILENAME_SIZE );strcat (pkg_file, opt_ddp_filename);
@@ -1901,6 +1923,10 @@ int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn) goto load_fw; no_dsn: +ice_read_customized_path (pkg_file); +if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; +strncpy (pkg_file,ICE_PKG_FILE_UPDATES ,ICE_MAX_PKG_FILENAME_SIZE );if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) goto load_fw;
drivers/net/ice/ice_ethdev.h +1 -0
@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256
Signature · 1 line
2.34.1
Re: [PATCH v2] net/ice: support customized search path for DDP package
Quoted 7 lines · Zhichao Zeng
This patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "
/sys/module/firmware_class/parameters/path",
and try to load DDP package.Signed-off-by Zhichao Zeng <[email protected]>
See review comments inline below.
Thanks,
/Bruce
Quoted 13 lines
---
v2: separate the patch and rewrite the log--- doc/guides/nics/ice.rst | 5 +++++ drivers/net/ice/ice_ethdev.c | 26 ++++++++++++++++++++++++++ drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 32 insertions(+)doc/guides/nics/ice.rst +0
-0
doc/guides/nics/ice.rst Runtime Configuration · line 115
Quoted 8 lines
doc/guides/nics/ice.rst +5
-0@@ -108,6 +108,11 @@ Runtime Configuration -a 80:00.0,default-mac-disable=1 +- ``DDP Package File`` + + Support for customizing the firmware search path, will read the search path + from "/sys/module/firmware_class/parameters/path" and try to load DDP package. +
This is no longer a configuration parameter, so this section can be removed from the doc.
There is a section in the ice docs for "Limitations or Known Issues" where the search paths for DDP package files are given. That could do with an update in this patch. Also, the details of DDP searching probably should go in its own section rather than having it as a limitation - move it further up the doc to be more accessible to users.
Quoted 8 lines
doc/guides/nics/ice.rst +0
-0- ``Protocol extraction for per queue`` Configure the RX queues to do protocol extraction into mbuf for protocoldrivers/net/ice/ice_ethdev.c +0
-0
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1881
Quoted 9 lines
drivers/net/ice/ice_ethdev.c +6
-0@@ -1873,6 +1873,22 @@ ice_load_pkg_type(struct ice_hw *hw)return package_type; } +static int ice_read_customized_path (char *pkg_file) +{ +char buf[ICE_MAX_PKG_FILENAME_SIZE ]; +FILE *fp =fopen (ICE_PKG_FILE_CUSTOMIZED_PATH ,"r" ); +if (fp ==NULL ) { +PMD_INIT_LOG (ERR ,"Failed to read CUSTOMIZED_PATH" );
Is this actually an error? Will older kernels not be missing this path, in which case it's not really a problem at all? I think any message should be at a much lower logging level to avoid unnecessary warnings to users.
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1884
Quoted 3 lines
drivers/net/ice/ice_ethdev.c +3
-0+return -EIO ; + } +if (fscanf (fp,"%s\n" , buf) >0 )
This looks unsafe to me, you are not specifying a maximum string length in the call to fscanf.
For strings, just use fgets, or alternatively just use regular "open" and "read" system calls.
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1885
Quoted 1 line
drivers/net/ice/ice_ethdev.c +1
-0+strncpy (pkg_file, buf,ICE_MAX_PKG_FILENAME_SIZE );
strncpy is insecure in many cases (such as here!) and should not be used. This will not null-terminate the string at all. For string copies use safe functions like "strlcpy".
However, there is no need to do a copy here at all. Remove the variable "buf" and instead read the value directly into "pkg_file". Using a temporary variable has no benefit.
NOTE: you also need to change the function signature to pass in the length of pkg_file variable. When passing a string field to be completed, you always need to pass in the length value too.
Quoted 10 lines
drivers/net/ice/ice_ethdev.c +6
-0+else +return -EIO ; + +return 0 ; +} +int ice_load_pkg (struct ice_adapter *adapter,bool use_dsn,uint64_t dsn) {struct ice_hw *hw = &adapter->hw;
drivers/net/ice/ice_ethdev.c int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn) · line 1909
Quoted 6 lines
drivers/net/ice/ice_ethdev.c +3
-0@@ -1888,6 +1904,12 @@ int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn)memset (opt_ddp_filename,0 ,ICE_MAX_PKG_FILENAME_SIZE );snprintf (opt_ddp_filename,ICE_MAX_PKG_FILENAME_SIZE ,"ice-%016" PRIx64".pkg" , dsn); + +ice_read_customized_path (pkg_file); +strcat (pkg_file, opt_ddp_filename);
This is also at risk of buffer overflows. Use strlcat and check for errors that the paths are not too long.
drivers/net/ice/ice_ethdev.c int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn) · line 1926
Quoted 11 lines
drivers/net/ice/ice_ethdev.c +4
-0+if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; +strncpy (pkg_file,ICE_PKG_FILE_SEARCH_PATH_UPDATES ,ICE_MAX_PKG_FILENAME_SIZE );strcat (pkg_file, opt_ddp_filename);@@ -1901,6 +1923,10 @@ int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn) goto load_fw; no_dsn: +ice_read_customized_path (pkg_file);
Minor nit, but why read sysfs twice using system calls. Use a local variable to save the value from the first read rather than repeating it.
Quoted 21 lines
drivers/net/ice/ice_ethdev.c +3
-0+if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; +strncpy (pkg_file,ICE_PKG_FILE_UPDATES ,ICE_MAX_PKG_FILENAME_SIZE );if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) goto load_fw;drivers/net/ice/ice_ethdev.h +1
-0@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256Signature · 1 line
2.34.1
PATCH v3 1/1 net/ice: support customized search path for DDP package
In reply to Zhichao ZengThis patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "/sys/module/firmware_class/parameters/path", and try to load DDP package.
Also, updates documentation for loading the DDP package in ice.rst.
---
v3: update doc, fix code error
v2: separate the patch and rewrite the log
--- doc/guides/nics/ice.rst | 64 ++++++++++++++++++++---------------- drivers/net/ice/ice_ethdev.c | 41 +++++++++++++++++++++++ drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 77 insertions(+), 29 deletions(-)
doc/guides/nics/ice.rst +35 -29
@@ -80,6 +80,41 @@ are listed in the Tested Platforms section of the Release Notes for each release | 24.03 | 1.13.7 | 1.3.35 | 1.3.45 | 1.3.13 | 4.4 | +-----------+---------------+-----------------+-----------+--------------+-----------+ +Dynamic Device Personalization (DDP) package loading +---------------------------------------------------- + +The Intel E810 requires a programmable pipeline package be downloaded +by the driver to support normal operations. The E810 has a limited +functionality built in to allow PXE boot and other use cases, but the +driver must download a package file during the driver initialization +stage. + +The default DDP package file name is ice.pkg. For a specific NIC, the +DDP package supposed to be loaded can have a filename: ice-xxxxxx.pkg, +where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For +example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, +the device-specific DDP package filename is ice-00ccbbffffaa0568.pkg +(in hex and all low case), please review README from +`Intel® Ethernet 800 Series Dynamic Device Personalization (DDP) for +Telecommunication (Comms) Package<https://www.intel.com/content/www/us/en/download/19660/ +intel-ethernet-800-series-dynamic-device-personalization-ddp-for-telecommunication-comms-package.html>`_ +for more information. A symbolic link to the DDP package file is also ok. +The same package file is used by both the kernel driver and the ICE PMD. + +ICE PMD support customized DDP search path like kernel behaviour, driver will +read DDP path from '/sys/module/firmware_class/parameters/path' as CUSTOMIZED_PATH. +During initialization, the driver searches in the following paths in order: +CUSTOMIZED_PATH(mentioned above), /lib/firmware/updates/intel/ice/ddp and +/lib/firmware/intel/ice/ddp. The corresponding device-specific DDP +package will be downloaded first if the file exists. If not, then the +driver tries to load the default package. The type of loaded package +is stored in ``ice_adapter->active_pkg_type``. + + .. Note:: + + Windows support: The DDP package is not supported on Windows so, + loading of the package is disabled on Windows. + Configuration -------------
@@ -487,32 +522,3 @@ Usage:: In "brief" mode, all scheduling nodes in the tree are displayed. In "detail" mode, each node's configuration parameters are also displayed. - -Limitations or Known issues ---------------------------- - -The Intel E810 requires a programmable pipeline package be downloaded -by the driver to support normal operations. The E810 has a limited -functionality built in to allow PXE boot and other use cases, but the -driver must download a package file during the driver initialization -stage. - -The default DDP package file name is ice.pkg. For a specific NIC, the -DDP package supposed to be loaded can have a filename: ice-xxxxxx.pkg, -where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For -example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, -the device-specific DDP package filename is ice-00ccbbffffaa0568.pkg -(in hex and all low case). During initialization, the driver searches -in the following paths in order: /lib/firmware/updates/intel/ice/ddp -and /lib/firmware/intel/ice/ddp. The corresponding device-specific DDP -package will be downloaded first if the file exists. If not, then the -driver tries to load the default package. The type of loaded package -is stored in ``ice_adapter->active_pkg_type``. - -A symbolic link to the DDP package file is also ok. The same package -file is used by both the kernel driver and the DPDK PMD. - - .. Note:: - - Windows support: The DDP package is not supported on Windows so, - loading of the package is disabled on Windows.
drivers/net/ice/ice_ethdev.c +41 -0
68 lines not on this page · raw message
drivers/net/ice/ice_ethdev.h +1 -0
@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256
Signature · 1 line
2.34.1
PATCH v3 1/1 net/ice: support customized search path for DDP package
In reply to Zhichao ZengThis patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "/sys/module/firmware_class/parameters/path", and try to load DDP package.
Also, updates documentation for loading the DDP package in ice.rst.
---
v3: update doc, fix code error
v2: separate the patch and rewrite the log
--- doc/guides/nics/ice.rst | 64 ++++++++++++++++++++---------------- drivers/net/ice/ice_ethdev.c | 41 +++++++++++++++++++++++ drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 77 insertions(+), 29 deletions(-)
doc/guides/nics/ice.rst +35 -29
@@ -80,6 +80,41 @@ are listed in the Tested Platforms section of the Release Notes for each release | 24.03 | 1.13.7 | 1.3.35 | 1.3.45 | 1.3.13 | 4.4 | +-----------+---------------+-----------------+-----------+--------------+-----------+ +Dynamic Device Personalization (DDP) package loading +---------------------------------------------------- + +The Intel E810 requires a programmable pipeline package be downloaded +by the driver to support normal operations. The E810 has a limited +functionality built in to allow PXE boot and other use cases, but the +driver must download a package file during the driver initialization +stage. + +The default DDP package file name is ice.pkg. For a specific NIC, the +DDP package supposed to be loaded can have a filename: ice-xxxxxx.pkg, +where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For +example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, +the device-specific DDP package filename is ice-00ccbbffffaa0568.pkg +(in hex and all low case), please review README from +`Intel® Ethernet 800 Series Dynamic Device Personalization (DDP) for +Telecommunication (Comms) Package<https://www.intel.com/content/www/us/en/download/19660/ +intel-ethernet-800-series-dynamic-device-personalization-ddp-for-telecommunication-comms-package.html>`_ +for more information. A symbolic link to the DDP package file is also ok. +The same package file is used by both the kernel driver and the ICE PMD. + +ICE PMD support customized DDP search path, driver will read search path +from '/sys/module/firmware_class/parameters/path' as CUSTOMIZED_PATH. +During initialization, the driver searches in the following paths in order: +CUSTOMIZED_PATH(mentioned above), /lib/firmware/updates/intel/ice/ddp and +/lib/firmware/intel/ice/ddp. The corresponding device-specific DDP +package will be downloaded first if the file exists. If not, then the +driver tries to load the default package. The type of loaded package +is stored in ``ice_adapter->active_pkg_type``. + + .. Note:: + + Windows support: The DDP package is not supported on Windows so, + loading of the package is disabled on Windows. + Configuration -------------
@@ -487,32 +522,3 @@ Usage:: In "brief" mode, all scheduling nodes in the tree are displayed. In "detail" mode, each node's configuration parameters are also displayed. - -Limitations or Known issues ---------------------------- - -The Intel E810 requires a programmable pipeline package be downloaded -by the driver to support normal operations. The E810 has a limited -functionality built in to allow PXE boot and other use cases, but the -driver must download a package file during the driver initialization -stage. - -The default DDP package file name is ice.pkg. For a specific NIC, the -DDP package supposed to be loaded can have a filename: ice-xxxxxx.pkg, -where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For -example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, -the device-specific DDP package filename is ice-00ccbbffffaa0568.pkg -(in hex and all low case). During initialization, the driver searches -in the following paths in order: /lib/firmware/updates/intel/ice/ddp -and /lib/firmware/intel/ice/ddp. The corresponding device-specific DDP -package will be downloaded first if the file exists. If not, then the -driver tries to load the default package. The type of loaded package -is stored in ``ice_adapter->active_pkg_type``. - -A symbolic link to the DDP package file is also ok. The same package -file is used by both the kernel driver and the DPDK PMD. - - .. Note:: - - Windows support: The DDP package is not supported on Windows so, - loading of the package is disabled on Windows.
drivers/net/ice/ice_ethdev.c +41 -0
68 lines not on this page · raw message
drivers/net/ice/ice_ethdev.h +1 -0
@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256
Signature · 1 line
2.34.1
PATCH v4 1/1 net/ice: support customized search path for DDP package
This patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "/sys/module/firmware_class/parameters/path", and try to load DDP package.
Also, updates documentation for loading the DDP package in ice.rst.
---
v4: fix CI error
v3: update doc, fix code error
v2: separate the patch and rewrite the log
--- doc/guides/nics/ice.rst | 63 +++++++++++++++++++----------------- drivers/net/ice/ice_ethdev.c | 44 +++++++++++++++++++++++++ drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 79 insertions(+), 29 deletions(-)
doc/guides/nics/ice.rst +34 -29
@@ -80,6 +80,40 @@ are listed in the Tested Platforms section of the Release Notes for each release | 24.03 | 1.13.7 | 1.3.35 | 1.3.45 | 1.3.13 | 4.4 | +-----------+---------------+-----------------+-----------+--------------+-----------+ +Dynamic Device Personalization (DDP) package loading +---------------------------------------------------- + +The Intel E810 requires a programmable pipeline package be downloaded +by the driver to support normal operations. The E810 has a limited +functionality built in to allow PXE boot and other use cases, but the +driver must download a package file during the driver initialization +stage. + +The default DDP package file name is ice.pkg. For a specific NIC, the +DDP package supposed to be loaded can have a filename: ice-xxxxxx.pkg, +where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For +example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, +the device-specific DDP package filename is ice-00ccbbffffaa0568.pkg +(in hex and all low case), please review README from +`Intel® Ethernet 800 Series Dynamic Device Personalization (DDP) for Telecommunication (Comms) Package +<https://www.intel.com/content/www/us/en/download/19660/intel-ethernet-800-series-dynamic-device-personalization-ddp-for-telecommunication-comms-package.html>`_ +for more information. A symbolic link to the DDP package file is also ok. +The same package file is used by both the kernel driver and the ICE PMD. + +ICE PMD support customized DDP search path, driver will read search path +from '/sys/module/firmware_class/parameters/path' as CUSTOMIZED_PATH. +During initialization, the driver searches in the following paths in order: +CUSTOMIZED_PATH(mentioned above), /lib/firmware/updates/intel/ice/ddp and +/lib/firmware/intel/ice/ddp. The corresponding device-specific DDP +package will be downloaded first if the file exists. If not, then the +driver tries to load the default package. The type of loaded package +is stored in ``ice_adapter->active_pkg_type``. + + .. Note:: + + Windows support: The DDP package is not supported on Windows so, + loading of the package is disabled on Windows. + Configuration -------------
@@ -487,32 +521,3 @@ Usage:: In "brief" mode, all scheduling nodes in the tree are displayed. In "detail" mode, each node's configuration parameters are also displayed. - -Limitations or Known issues ---------------------------- - -The Intel E810 requires a programmable pipeline package be downloaded -by the driver to support normal operations. The E810 has a limited -functionality built in to allow PXE boot and other use cases, but the -driver must download a package file during the driver initialization -stage. - -The default DDP package file name is ice.pkg. For a specific NIC, the -DDP package supposed to be loaded can have a filename: ice-xxxxxx.pkg, -where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For -example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, -the device-specific DDP package filename is ice-00ccbbffffaa0568.pkg -(in hex and all low case). During initialization, the driver searches -in the following paths in order: /lib/firmware/updates/intel/ice/ddp -and /lib/firmware/intel/ice/ddp. The corresponding device-specific DDP -package will be downloaded first if the file exists. If not, then the -driver tries to load the default package. The type of loaded package -is stored in ``ice_adapter->active_pkg_type``. - -A symbolic link to the DDP package file is also ok. The same package -file is used by both the kernel driver and the DPDK PMD. - - .. Note:: - - Windows support: The DDP package is not supported on Windows so, - loading of the package is disabled on Windows.
drivers/net/ice/ice_ethdev.c +44 -0
71 lines not on this page · raw message
drivers/net/ice/ice_ethdev.h +1 -0
@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256
Signature · 1 line
2.34.1
Re: [PATCH v4] net/ice: support customized search path for DDP package
Quoted 25 lines · Zhichao Zeng
This patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "
/sys/module/firmware_class/parameters/path", and try to load DDP package.Also, updates documentation for loading the DDP package in
ice.rst.Signed-off-by Zhichao Zeng <[email protected]>---
v4: fix CI error
v3: update doc, fix code error
v2: separate the patch and rewrite the log--- doc/guides/nics/ice.rst | 63 +++++++++++++++++++----------------- drivers/net/ice/ice_ethdev.c | 44 +++++++++++++++++++++++++ drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 79 insertions(+), 29 deletions(-)doc/guides/nics/ice.rst +0
-0@@ -80,6 +80,40 @@ are listed in the Tested Platforms section of the Release Notes for each release | 24.03 | 1.13.7 | 1.3.35 | 1.3.45 | 1.3.13 | 4.4 |
doc/guides/nics/ice.rst are listed in the Tested Platforms section of the Release Notes for each release · line 90
Quoted 10 lines
doc/guides/nics/ice.rst +8
-0+-----------+---------------+-----------------+-----------+--------------+-----------+ +Dynamic Device Personalization (DDP) package loading +---------------------------------------------------- + +The Intel E810 requires a programmable pipeline package be downloaded +by the driver to support normal operations. The E810 has a limited +functionality built in to allow PXE boot and other use cases, but the +driver must download a package file during the driver initialization +stage.
Hi Zhichao,
I realise that this text above is not written by you, but when moving this text we can update it a little.
* in second sentence, drop the word "a" before "limited functionality".
* I feel we are missing a few words in the second sentence to clarify the need for DDP support. For example, after the word "but" we could clarify with "for normal use" or "for DPDK use" or some similar phrase.
doc/guides/nics/ice.rst are listed in the Tested Platforms section of the Release Notes for each release · line 93
Quoted 3 lines
doc/guides/nics/ice.rst +3
-0+ +The default DDP package file name is ice.pkg. For a specific NIC, the +DDP package supposed to be loaded can have a filename: ice-xxxxxx.pkg,
For the filenames: ice.pkg and ice-xxxxxx.pkg, put them in `` quotes to make them monospaced/literal text. Same for filenames below.
doc/guides/nics/ice.rst are listed in the Tested Platforms section of the Release Notes for each release · line 103
Quoted 10 lines
doc/guides/nics/ice.rst +10
-0+where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For +example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, +the device-specific DDP package filename is ice-00ccbbffffaa0568.pkg +(in hex and all low case), please review README from +`Intel® Ethernet 800 Series Dynamic Device Personalization (DDP) for Telecommunication (Comms) Package +<https://www.intel.com/content/www/us/en/download/19660/intel-ethernet-800-series-dynamic-device-personalization-ddp-for-telecommunication-comms-package.html>`_ +for more information. A symbolic link to the DDP package file is also ok. +The same package file is used by both the kernel driver and the ICE PMD. + +ICE PMD support customized DDP search path, driver will read search path
"support" -> "supports using a"
", driver" -> ". The driver"
"search path" -> "the search path"
doc/guides/nics/ice.rst are listed in the Tested Platforms section of the Release Notes for each release · line 106
Quoted 3 lines
doc/guides/nics/ice.rst +3
-0+from '/sys/module/firmware_class/parameters/path' as CUSTOMIZED_PATH. +During initialization, the driver searches in the following paths in order: +CUSTOMIZED_PATH(mentioned above), /lib/firmware/updates/intel/ice/ddp and
you can drop "(mentioned above)".
doc/guides/nics/ice.rst are listed in the Tested Platforms section of the Release Notes for each release · line 110
Quoted 4 lines
doc/guides/nics/ice.rst +4
-0+/lib/firmware/intel/ice/ddp. The corresponding device-specific DDP +package will be downloaded first if the file exists. If not, then the +driver tries to load the default package. The type of loaded package +is stored in ``ice_adapter->active_pkg_type``.
The behaviour is not exactly clear here. The text seems to imply (at least ot me) that the search order is to check each directory first for the serial-number package and then for ice.pkg, before moving on to the next directory. However, the actual search pattern in the code is to check each directory in turn for a serial number package, and then scan each directory in turn for an ice.pkg file. Consider the case of having two files:
$CUSTOMIZED_PATH/ice.pkg/lib/firmware/intel/ice/ddp/ice-xxxxxxx.pkg
As described in the doc text above, I would expect the first of these two packages to be used, since it's in the customized path, but in fact the second will be used by the code since it has a serial number on it so is found in the initial scan for a numbered-package.
doc/guides/nics/ice.rst are listed in the Tested Platforms section of the Release Notes for each release · line 115
Quoted 5 lines
doc/guides/nics/ice.rst +5
-0+ + .. Note:: + + Windows support: The DDP package is not supported on Windows so, + loading of the package is disabled on Windows.
I notice that the comma "," is in the wrong place in
the original text - it should come before the "so" not after it - but overall the whole line can just be shortened to:
"Windows support: DDP packages are not supported on Windows"
<snip for brevity>
Thanks,
/Bruce
PATCH v5 1/1 net/ice: support customized search path for DDP package
In reply to Zhichao ZengThis patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "/sys/module/firmware_class/parameters/path", and try to load DDP package.
Also, updates documentation for loading the DDP package in ice.rst.
---
v5: update documentation, fix code logic
v4: fix CI error
v3: update doc, fix code error
v2: separate the patch and rewrite the log
--- doc/guides/nics/ice.rst | 61 +++++++++++++++++++----------------- drivers/net/ice/ice_ethdev.c | 44 ++++++++++++++++++++++++-- drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 75 insertions(+), 31 deletions(-)
doc/guides/nics/ice.rst +32 -29
@@ -80,6 +80,38 @@ are listed in the Tested Platforms section of the Release Notes for each release | 24.03 | 1.13.7 | 1.3.35 | 1.3.45 | 1.3.13 | 4.4 | +-----------+---------------+-----------------+-----------+--------------+-----------+ +Dynamic Device Personalization (DDP) package loading +---------------------------------------------------- + +The Intel E810 requires a programmable pipeline package be downloaded +by the driver to support normal operations. The E810 has limited +functionality built in to allow PXE boot and other use cases, but for DPDK use +the driver must download a package file during the driver initialization +stage. + +The default DDP package file name is ``ice.pkg``. For a specific NIC, the +DDP package supposed to be loaded can have a filename: ``ice-xxxxxx.pkg``, +where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For +example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, +the device-specific DDP package filename is ``ice-00ccbbffffaa0568.pkg`` +(in hex and all low case), please review README from +`Intel® Ethernet 800 Series Dynamic Device Personalization (DDP) for Telecommunication (Comms) Package +<https://www.intel.com/content/www/us/en/download/19660/intel-ethernet-800-series-dynamic-device-personalization-ddp-for-telecommunication-comms-package.html>`_ +for more information. A symbolic link to the DDP package file is also ok. +The same package file is used by both the kernel driver and the ICE PMD. + +ICE PMD supports using a customized DDP search path. The driver will read +the search path from '/sys/module/firmware_class/parameters/path' +as 'CUSTOMIZED_PATH'. +During initialization, the driver searches in the following paths in order: +'CUSTOMIZED_PATH', '/lib/firmware/updates/intel/ice/ddp' and '/lib/firmware/intel/ice/ddp'. +The device-specific DDP package has a higher loading priority than default DDP package. +The type of loaded package is stored in ``ice_adapter->active_pkg_type``. + + .. Note:: + + Windows support: DDP packages are not supported on Windows. + Configuration -------------
@@ -487,32 +519,3 @@ Usage:: In "brief" mode, all scheduling nodes in the tree are displayed. In "detail" mode, each node's configuration parameters are also displayed. - -Limitations or Known issues ---------------------------- - -The Intel E810 requires a programmable pipeline package be downloaded -by the driver to support normal operations. The E810 has a limited -functionality built in to allow PXE boot and other use cases, but the -driver must download a package file during the driver initialization -stage. - -The default DDP package file name is ice.pkg. For a specific NIC, the -DDP package supposed to be loaded can have a filename: ice-xxxxxx.pkg, -where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For -example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, -the device-specific DDP package filename is ice-00ccbbffffaa0568.pkg -(in hex and all low case). During initialization, the driver searches -in the following paths in order: /lib/firmware/updates/intel/ice/ddp -and /lib/firmware/intel/ice/ddp. The corresponding device-specific DDP -package will be downloaded first if the file exists. If not, then the -driver tries to load the default package. The type of loaded package -is stored in ``ice_adapter->active_pkg_type``. - -A symbolic link to the DDP package file is also ok. The same package -file is used by both the kernel driver and the DPDK PMD. - - .. Note:: - - Windows support: The DDP package is not supported on Windows so, - loading of the package is disabled on Windows.
drivers/net/ice/ice_ethdev.c +42 -2
63 lines not on this page · raw message
drivers/net/ice/ice_ethdev.h +1 -0
@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256
Signature · 1 line
2.34.1
Re: [PATCH v5] net/ice: support customized search path for DDP package
Quoted 113 lines · Zhichao Zeng
This patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "
/sys/module/firmware_class/parameters/path", and try to load DDP package.Also, updates documentation for loading the DDP package in
ice.rst.Signed-off-by Zhichao Zeng <[email protected]>---
v5: update documentation, fix code logic
v4: fix CI error
v3: update doc, fix code error
v2: separate the patch and rewrite the log--- doc/guides/nics/ice.rst | 61 +++++++++++++++++++----------------- drivers/net/ice/ice_ethdev.c | 44 ++++++++++++++++++++++++-- drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 75 insertions(+), 31 deletions(-)doc/guides/nics/ice.rst +32
-29@@ -80,6 +80,38 @@ are listed in the Tested Platforms section of the Release Notes for each release | 24.03 | 1.13.7 | 1.3.35 | 1.3.45 | 1.3.13 | 4.4 | +-----------+---------------+-----------------+-----------+--------------+-----------+ +Dynamic Device Personalization (DDP) package loading +---------------------------------------------------- + +The Intel E810 requires a programmable pipeline package be downloaded +by the driver to support normal operations. The E810 has limited +functionality built in to allow PXE boot and other use cases, but for DPDK use +the driver must download a package file during the driver initialization +stage. + +The default DDP package file name is ``ice.pkg``. For a specific NIC, the +DDP package supposed to be loaded can have a filename: ``ice-xxxxxx.pkg``, +where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For +example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, +the device-specific DDP package filename is ``ice-00ccbbffffaa0568.pkg`` +(in hex and all low case), please review README from +`Intel® Ethernet 800 Series Dynamic Device Personalization (DDP) for Telecommunication (Comms) Package +<https://www.intel.com/content/www/us/en/download/19660/intel-ethernet-800-series-dynamic-device-personalization-ddp-for-telecommunication-comms-package.html>`_ +for more information. A symbolic link to the DDP package file is also ok. +The same package file is used by both the kernel driver and the ICE PMD. + +ICE PMD supports using a customized DDP search path. The driver will read +the search path from '/sys/module/firmware_class/parameters/path' +as 'CUSTOMIZED_PATH'. +During initialization, the driver searches in the following paths in order: +'CUSTOMIZED_PATH', '/lib/firmware/updates/intel/ice/ddp' and '/lib/firmware/intel/ice/ddp'. +The device-specific DDP package has a higher loading priority than default DDP package. +The type of loaded package is stored in ``ice_adapter->active_pkg_type``. + + .. Note:: + + Windows support: DDP packages are not supported on Windows. + Configuration -------------@@ -487,32 +519,3 @@ Usage:: In "brief" mode, all scheduling nodes in the tree are displayed. In "detail" mode, each node's configuration parameters are also displayed. - -Limitations or Known issues ---------------------------- - -The Intel E810 requires a programmable pipeline package be downloaded -by the driver to support normal operations. The E810 has a limited -functionality built in to allow PXE boot and other use cases, but the -driver must download a package file during the driver initialization -stage. - -The default DDP package file name is ice.pkg. For a specific NIC, the -DDP package supposed to be loaded can have a filename: ice-xxxxxx.pkg, -where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For -example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, -the device-specific DDP package filename is ice-00ccbbffffaa0568.pkg -(in hex and all low case). During initialization, the driver searches -in the following paths in order: /lib/firmware/updates/intel/ice/ddp -and /lib/firmware/intel/ice/ddp. The corresponding device-specific DDP -package will be downloaded first if the file exists. If not, then the -driver tries to load the default package. The type of loaded package -is stored in ``ice_adapter->active_pkg_type``. - -A symbolic link to the DDP package file is also ok. The same package -file is used by both the kernel driver and the DPDK PMD. - - .. Note:: - - Windows support: The DDP package is not supported on Windows so, - loading of the package is disabled on Windows.drivers/net/ice/ice_ethdev.c +9
-0@@ -1873,21 +1873,61 @@ ice_load_pkg_type(struct ice_hw *hw)return package_type; } +static int ice_read_customized_path (char *pkg_file,uint16_t buff_len) +{ +FILE *fp =fopen (ICE_PKG_FILE_CUSTOMIZED_PATH ,"r" ); +int ret =0 ; + +if (fp ==NULL ) { +PMD_INIT_LOG (INFO ,"Failed to read CUSTOMIZED_PATH" ); +return -EIO ; + }
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1894
Quoted 10 lines
drivers/net/ice/ice_ethdev.c +10
-0+ +if (fgets (pkg_file, buff_len, fp) ==NULL ) { + ret = -EIO ; + goto exit; + } + +if (strlen (pkg_file) <=1 ) + goto exit; + + pkg_file[strlen (pkg_file) -1 ] ='\0' ;
This line is unnecessary and, if it were necessary, also incorrect:
* fgets already guarantees to null-terminate
* if it didn't null terminate, then strlen wouldn't even work so this statement would be completely broken.
Also, as this line is unnecessary, the lines above it, and the label below are unnecessary too.
Quoted 14 lines
drivers/net/ice/ice_ethdev.c +6
-0+exit: +fclose (fp); +return ret; +} +int ice_load_pkg (struct ice_adapter *adapter,bool use_dsn,uint64_t dsn) {struct ice_hw *hw = &adapter->hw;char pkg_file[ICE_MAX_PKG_FILENAME_SIZE ]; +char customized_path[ICE_MAX_PKG_FILENAME_SIZE ];char opt_ddp_filename[ICE_MAX_PKG_FILENAME_SIZE ];void *buf;size_t bufsz;int err;
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1916
Quoted 10 lines
drivers/net/ice/ice_ethdev.c +3
-2-if (!use_dsn) - goto no_dsn; +ice_read_customized_path (customized_path,ICE_MAX_PKG_FILENAME_SIZE );memset (opt_ddp_filename,0 ,ICE_MAX_PKG_FILENAME_SIZE );snprintf (opt_ddp_filename,ICE_MAX_PKG_FILENAME_SIZE ,"ice-%016" PRIx64".pkg" , dsn); + +if (strlen (customized_path) >1 ) {
Is this really the best way to check for validity of the search path? I would tend to ignore length and use the return value from the function "ice_read_customized_path". Again, maybe check the logic used in the kernel for validating the path read.
Quoted 4 lines
drivers/net/ice/ice_ethdev.c +4
-0+if (use_dsn) { +snprintf (pkg_file,RTE_DIM (pkg_file), +"%s/%s" , customized_path, opt_ddp_filename); +if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 )
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1930
Quoted 10 lines
drivers/net/ice/ice_ethdev.c +10
-0+ goto load_fw; + } +snprintf (pkg_file,RTE_DIM (pkg_file),"%s/%s" , customized_path,"ice.pkg" ); +if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; + } + +if (!use_dsn) + goto no_dsn; +
This is changing the search path logic compared to v4. Does it match what the kernel does in finding a package?
Quoted 18 lines
drivers/net/ice/ice_ethdev.c +0
-0strncpy (pkg_file,ICE_PKG_FILE_SEARCH_PATH_UPDATES ,ICE_MAX_PKG_FILENAME_SIZE );strcat (pkg_file, opt_ddp_filename);drivers/net/ice/ice_ethdev.h +1
-0@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256Signature · 1 line
2.34.1
RE: [PATCH v5] net/ice: support customized search path for DDP package
Hi Bruce, thanks for your reply.
Quoted 24 lines
-----Original Message-----
From: Richardson, Bruce <[email protected]>
Sent: Thursday, September 19, 2024 3:50 PM
To: Zeng, ZhichaoX <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH v5] net/ice: support customized search path for DDP packageQuoted 15 lines · Zhichao Zeng
This patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "
/sys/module/firmware_class/parameters/path", and try to load DDP package.Also, updates documentation for loading the DDP package in
ice.rst.Signed-off-by Zhichao Zeng <[email protected]>---
v5: update documentation, fix code logic
v4: fix CI error
v3: update doc, fix code error
v2: separate the patch and rewrite the log
---
<snip>
Quoted 33 lines
Quoted 17 lines
(quoted diff) +0
-0
b/drivers/net/ice/ice_ethdev.cindex304f959b7e..f0389cc4ee100644drivers/net/ice/ice_ethdev.c +9
-0@@ -1873,21 +1873,61 @@ ice_load_pkg_type(struct ice_hw *hw)return package_type; } +static int ice_read_customized_path (char *pkg_file,uint16_t +buff_len) { +FILE *fp =fopen (ICE_PKG_FILE_CUSTOMIZED_PATH ,"r" ); +int ret =0 ; + +if (fp ==NULL ) { +PMD_INIT_LOG (INFO ,"Failed to read CUSTOMIZED_PATH" ); +return -EIO ; + }drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1894
Quoted 10 lines
drivers/net/ice/ice_ethdev.c +10
-0+ +if (fgets (pkg_file, buff_len, fp) ==NULL ) { + ret = -EIO ; + goto exit; + } + +if (strlen (pkg_file) <=1 ) + goto exit; + + pkg_file[strlen (pkg_file) -1 ] ='\0' ;This line is unnecessary and, if it were necessary, also incorrect:
* fgets already guarantees to null-terminate
* if it didn't null terminate, then strlen wouldn't even work so this statement would be completely broken.
Quoted 2 lines
Also, as this line is unnecessary, the lines above it, and the label below are unnecessary too.
The string read by fgets ends with "\n", my intention was to remove the newline.
Quoted 20 lines
Quoted 20 lines
drivers/net/ice/ice_ethdev.c +8
-2+exit: +fclose (fp); +return ret; +} +int ice_load_pkg (struct ice_adapter *adapter,bool use_dsn,uint64_t dsn) {struct ice_hw *hw = &adapter->hw;char pkg_file[ICE_MAX_PKG_FILENAME_SIZE ]; +char customized_path[ICE_MAX_PKG_FILENAME_SIZE ];char opt_ddp_filename[ICE_MAX_PKG_FILENAME_SIZE ];void *buf;size_t bufsz;int err; -if (!use_dsn) - goto no_dsn; +ice_read_customized_path (customized_path, +ICE_MAX_PKG_FILENAME_SIZE );
Quoted 10 lines
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1916
Quoted 5 lines
drivers/net/ice/ice_ethdev.c +2
-0memset (opt_ddp_filename,0 ,ICE_MAX_PKG_FILENAME_SIZE );snprintf (opt_ddp_filename,ICE_MAX_PKG_FILENAME_SIZE ,"ice-%016" PRIx64".pkg" , dsn); + +if (strlen (customized_path) >1 ) {Is this really the best way to check for validity of the search path? I would tend to ignore length and use the return value from the function "
ice_read_customized_path". Again, maybe check the logic used in the kernel for validating the path read.
Will use the return value instead of string length and check the logic in kernel.
Quoted 10 lines
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw)
Quoted 4 lines
drivers/net/ice/ice_ethdev.c +3
-0+if (use_dsn) { + snprintf(pkg_file, RTE_DIM(pkg_file), + "%s/%s", customized_path,
opt_ddp_filename);drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw)
Quoted 4 lines
drivers/net/ice/ice_ethdev.c +4
-0+if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; + } + snprintf(pkg_file, RTE_DIM(pkg_file), "%s/%s",
customized_path, "ice.pkg");
Quoted 11 lines
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1930
Quoted 7 lines
drivers/net/ice/ice_ethdev.c +7
-0+if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; + } + +if (!use_dsn) + goto no_dsn; +This is changing the search path logic compared to v4. Does it match what the kernel does in finding a package?
The kernel searches for DDP packages in the CUSTOMIZED_PATH first, then the default path.
Regards
Zhichao
Quoted 22 lines
drivers/net/ice/ice_ethdev.h line 51
Quoted 9 lines
drivers/net/ice/ice_ethdev.c +0
-0strncpy (pkg_file,ICE_PKG_FILE_SEARCH_PATH_UPDATES ,ICE_MAX_PKG_FILENAME_SIZE );strcat (pkg_file, opt_ddp_filename);(quoted diff) +0
-0
b/drivers/net/ice/ice_ethdev.hindex3ea9f37dc8..8b644ed700100644drivers/net/ice/ice_ethdev.h +0
-0@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "
/lib/firmware/updates/intel/ice/ddp/ice.pkg"drivers/net/ice/ice_ethdev.h line 52
Quoted 1 line
drivers/net/ice/ice_ethdev.h +0
-0#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "
/lib/firmware/intel/ice/ddp/"drivers/net/ice/ice_ethdev.h line 53
Quoted 1 line
drivers/net/ice/ice_ethdev.h +0
-0#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "
/lib/firmware/updates/intel/ice/ddp/"drivers/net/ice/ice_ethdev.h line 54
Quoted 1 line
drivers/net/ice/ice_ethdev.h +1
-0+#define ICE_PKG_FILE_CUSTOMIZED_PATH "
/sys/module/firmware_class/parameters/path"Quoted 6 lines
drivers/net/ice/ice_ethdev.h +0
-1#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256 --2.34.1
Re: [PATCH v5] net/ice: support customized search path for DDP package
Quoted 60 lines · ZhichaoX
Hi Bruce, thanks for your reply.
Quoted 24 lines
-----Original Message-----
From: Richardson, Bruce <[email protected]>
Sent: Thursday, September 19, 2024 3:50 PM
To: Zeng, ZhichaoX <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH v5] net/ice: support customized search path for DDP packageQuoted 15 lines · Zhichao Zeng
This patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "
/sys/module/firmware_class/parameters/path", and try to load DDP package.Also, updates documentation for loading the DDP package in
ice.rst.Signed-off-by Zhichao Zeng <[email protected]>---
v5: update documentation, fix code logic
v4: fix CI error
v3: update doc, fix code error
v2: separate the patch and rewrite the log
---<snip>
Quoted 33 lines
Quoted 17 lines
(quoted diff) +0
-0
b/drivers/net/ice/ice_ethdev.cindex304f959b7e..f0389cc4ee100644drivers/net/ice/ice_ethdev.c +9
-0@@ -1873,21 +1873,61 @@ ice_load_pkg_type(struct ice_hw *hw)return package_type; } +static int ice_read_customized_path (char *pkg_file,uint16_t +buff_len) { +FILE *fp =fopen (ICE_PKG_FILE_CUSTOMIZED_PATH ,"r" ); +int ret =0 ; + +if (fp ==NULL ) { +PMD_INIT_LOG (INFO ,"Failed to read CUSTOMIZED_PATH" ); +return -EIO ; + }drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1894
Quoted 10 lines
drivers/net/ice/ice_ethdev.c +10
-0+ +if (fgets (pkg_file, buff_len, fp) ==NULL ) { + ret = -EIO ; + goto exit; + } + +if (strlen (pkg_file) <=1 ) + goto exit; + + pkg_file[strlen (pkg_file) -1 ] ='\0' ;This line is unnecessary and, if it were necessary, also incorrect:
* fgets already guarantees to null-terminate
* if it didn't null terminate, then strlen wouldn't even work so this statement would be completely broken.
Quoted 5 lines
Quoted 2 lines
Also, as this line is unnecessary, the lines above it, and the label below are unnecessary too.
The string read by fgets ends with "\n", my intention was to remove the newline.
Ah, apologies, my bad. That makes sense now. However, I think it would be clearer for future readers if this was more explicitly called out. At minimum use a comment, but even better is an explicit check for a '\n' before you strip it.
Quoted 55 lines
Quoted 20 lines
Quoted 20 lines
drivers/net/ice/ice_ethdev.c +8
-2+exit: +fclose (fp); +return ret; +} +int ice_load_pkg (struct ice_adapter *adapter,bool use_dsn,uint64_t dsn) {struct ice_hw *hw = &adapter->hw;char pkg_file[ICE_MAX_PKG_FILENAME_SIZE ]; +char customized_path[ICE_MAX_PKG_FILENAME_SIZE ];char opt_ddp_filename[ICE_MAX_PKG_FILENAME_SIZE ];void *buf;size_t bufsz;int err; -if (!use_dsn) - goto no_dsn; +ice_read_customized_path (customized_path, +ICE_MAX_PKG_FILENAME_SIZE );Quoted 10 lines
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1916
Quoted 5 lines
drivers/net/ice/ice_ethdev.c +2
-0memset (opt_ddp_filename,0 ,ICE_MAX_PKG_FILENAME_SIZE );snprintf (opt_ddp_filename,ICE_MAX_PKG_FILENAME_SIZE ,"ice-%016" PRIx64".pkg" , dsn); + +if (strlen (customized_path) >1 ) {Is this really the best way to check for validity of the search path? I would tend to ignore length and use the return value from the function "
ice_read_customized_path". Again, maybe check the logic used in the kernel for validating the path read.Will use the return value instead of string length and check the logic in kernel.
Quoted 10 lines
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw)
Quoted 4 lines
drivers/net/ice/ice_ethdev.c +3
-0+if (use_dsn) { + snprintf(pkg_file, RTE_DIM(pkg_file), + "%s/%s", customized_path,
opt_ddp_filename);drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw)
Quoted 4 lines
drivers/net/ice/ice_ethdev.c +4
-0+if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; + } + snprintf(pkg_file, RTE_DIM(pkg_file), "%s/%s",
customized_path, "ice.pkg");Quoted 11 lines
drivers/net/ice/ice_ethdev.c ice_load_pkg_type(struct ice_hw *hw) · line 1930
Quoted 7 lines
drivers/net/ice/ice_ethdev.c +7
-0+if (rte_firmware_read (pkg_file, &buf, &bufsz) ==0 ) + goto load_fw; + } + +if (!use_dsn) + goto no_dsn; +This is changing the search path logic compared to v4. Does it match what the kernel does in finding a package?
Quoted 2 lines
The kernel searches for DDP packages in the
CUSTOMIZED_PATHfirst, then the default path.
Thanks for confirming.
PATCH v6 1/1 net/ice: support customized search path for DDP package
In reply to Zhichao ZengThis patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "/sys/module/firmware_class/parameters/path", and try to load DDP package.
Also, updates documentation for loading the DDP package in ice.rst.
---
v6: use open() instead of fopen()
v5: update documentation, fix code logic
v4: fix CI error
v3: update doc, fix code error
v2: separate the patch and rewrite the log
--- doc/guides/nics/ice.rst | 60 +++++++++++++++++++----------------- drivers/net/ice/ice_ethdev.c | 47 ++++++++++++++++++++++++++-- drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 76 insertions(+), 32 deletions(-)
doc/guides/nics/ice.rst +31 -29
@@ -80,6 +80,37 @@ are listed in the Tested Platforms section of the Release Notes for each release | 24.03 | 1.13.7 | 1.3.35 | 1.3.45 | 1.3.13 | 4.4 | +-----------+---------------+-----------------+-----------+--------------+-----------+ +Dynamic Device Personalization (DDP) package loading +---------------------------------------------------- + +The Intel E810 requires a programmable pipeline package be downloaded +by the driver to support normal operations. The E810 has limited +functionality built in to allow PXE boot and other use cases, but for DPDK use +the driver must download a package file during the driver initialization +stage. + +The default DDP package file name is ``ice.pkg``. For a specific NIC, the +DDP package supposed to be loaded can have a filename: ``ice-xxxxxx.pkg``, +where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For +example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, +the device-specific DDP package filename is ``ice-00ccbbffffaa0568.pkg`` +(in hex and all low case), please review README from +`Intel® Ethernet 800 Series Dynamic Device Personalization (DDP) for Telecommunication (Comms) Package +<https://www.intel.com/content/www/us/en/download/19660/intel-ethernet-800-series-dynamic-device-personalization-ddp-for-telecommunication-comms-package.html>`_ +for more information. A symbolic link to the DDP package file is also ok. +The same package file is used by both the kernel driver and the ICE PMD. + +ICE PMD supports using a customized DDP search path. The driver will read +the search path from '/sys/module/firmware_class/parameters/path' +as 'CUSTOMIZED_PATH'. +During initialization, the driver searches in the following paths in order: +'CUSTOMIZED_PATH', '/lib/firmware/updates/intel/ice/ddp' and '/lib/firmware/intel/ice/ddp'. +The device-specific DDP package has a higher loading priority than default DDP package. + + .. Note:: + + Windows support: DDP packages are not supported on Windows. + Configuration -------------
@@ -487,32 +518,3 @@ Usage:: In "brief" mode, all scheduling nodes in the tree are displayed. In "detail" mode, each node's configuration parameters are also displayed. - -Limitations or Known issues ---------------------------- - -The Intel E810 requires a programmable pipeline package be downloaded -by the driver to support normal operations. The E810 has a limited -functionality built in to allow PXE boot and other use cases, but the -driver must download a package file during the driver initialization -stage. - -The default DDP package file name is ice.pkg. For a specific NIC, the -DDP package supposed to be loaded can have a filename: ice-xxxxxx.pkg, -where 'xxxxxx' is the 64-bit PCIe Device Serial Number of the NIC. For -example, if the NIC's device serial number is 00-CC-BB-FF-FF-AA-05-68, -the device-specific DDP package filename is ice-00ccbbffffaa0568.pkg -(in hex and all low case). During initialization, the driver searches -in the following paths in order: /lib/firmware/updates/intel/ice/ddp -and /lib/firmware/intel/ice/ddp. The corresponding device-specific DDP -package will be downloaded first if the file exists. If not, then the -driver tries to load the default package. The type of loaded package -is stored in ``ice_adapter->active_pkg_type``. - -A symbolic link to the DDP package file is also ok. The same package -file is used by both the kernel driver and the DPDK PMD. - - .. Note:: - - Windows support: The DDP package is not supported on Windows so, - loading of the package is disabled on Windows.
drivers/net/ice/ice_ethdev.c +44 -3
71 lines not on this page · raw message
drivers/net/ice/ice_ethdev.h +1 -0
@@ -51,6 +51,7 @@#define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"#define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"#define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/" +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"#define ICE_MAX_PKG_FILENAME_SIZE 256#define MAX_ACL_NORMAL_ENTRIES 256
Signature · 1 line
2.34.1
Re: [PATCH v6] net/ice: support customized search path for DDP package
Quoted 28 lines · Zhichao Zeng
This patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "
/sys/module/firmware_class/parameters/path", and try to load DDP package.Also, updates documentation for loading the DDP package in
ice.rst.Signed-off-by Zhichao Zeng <[email protected]>---
v6: useopen()instead offopen()
v5: update documentation, fix code logic
v4: fix CI error
v3: update doc, fix code error
v2: separate the patch and rewrite the log--- doc/guides/nics/ice.rst | 60 +++++++++++++++++++----------------- drivers/net/ice/ice_ethdev.c | 47 ++++++++++++++++++++++++++-- drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 76 insertions(+), 32 deletions(-)doc/guides/nics/ice.rst +0
-0@@ -80,6 +80,37 @@ are listed in the Tested Platforms section of the Release Notes for each release | 24.03 | 1.13.7 | 1.3.35 | 1.3.45 | 1.3.13 | 4.4 | +-----------+---------------+-----------------+-----------+--------------+-----------+
doc/guides/nics/ice.rst are listed in the Tested Platforms section of the Release Notes for each release · line 91
Quoted 10 lines
doc/guides/nics/ice.rst +9
-0+Dynamic Device Personalization (DDP) package loading +---------------------------------------------------- + +The Intel E810 requires a programmable pipeline package be downloaded +by the driver to support normal operations. The E810 has limited +functionality built in to allow PXE boot and other use cases, but for DPDK use +the driver must download a package file during the driver initialization +stage. +
Minor nit - when writing documentation, rather than wrapping the lines at a fixed column width, it is better to wrap on punctuation and to always start a sentence on a new line. This reduces the diffs when editing documentation in future.
In this case, I'll just adjust the line-wrapping on apply, so no need for a new revision of the patch.
/Bruce
Bruce Richardson
Acked-byRe: [PATCH v6] net/ice: support customized search path for DDP package
Quoted 44 lines · Bruce Richardson
Quoted 28 lines · Zhichao Zeng
This patch adds support for customizing firmware search path for DDP package like the kernel behavior, it will read the search path from "
/sys/module/firmware_class/parameters/path", and try to load DDP package.Also, updates documentation for loading the DDP package in
ice.rst.Signed-off-by Zhichao Zeng <[email protected]>---
v6: useopen()instead offopen()
v5: update documentation, fix code logic
v4: fix CI error
v3: update doc, fix code error
v2: separate the patch and rewrite the log--- doc/guides/nics/ice.rst | 60 +++++++++++++++++++----------------- drivers/net/ice/ice_ethdev.c | 47 ++++++++++++++++++++++++++-- drivers/net/ice/ice_ethdev.h | 1 + 3 files changed, 76 insertions(+), 32 deletions(-)doc/guides/nics/ice.rst +0
-0@@ -80,6 +80,37 @@ are listed in the Tested Platforms section of the Release Notes for each release | 24.03 | 1.13.7 | 1.3.35 | 1.3.45 | 1.3.13 | 4.4 | +-----------+---------------+-----------------+-----------+--------------+-----------+doc/guides/nics/ice.rst are listed in the Tested Platforms section of the Release Notes for each release · line 91
Quoted 10 lines
doc/guides/nics/ice.rst +9
-0+Dynamic Device Personalization (DDP) package loading +---------------------------------------------------- + +The Intel E810 requires a programmable pipeline package be downloaded +by the driver to support normal operations. The E810 has limited +functionality built in to allow PXE boot and other use cases, but for DPDK use +the driver must download a package file during the driver initialization +stage. +Minor nit - when writing documentation, rather than wrapping the lines at a fixed column width, it is better to wrap on punctuation and to always start a sentence on a new line. This reduces the diffs when editing documentation in future.
Quoted 3 lines
In this case, I'll just adjust the line-wrapping on apply, so no need for a new revision of the patch.
Patch applied to dpdk-next-net-intel.
Thanks,
/Bruce