xfsprogs: utility changes for 6.12
PATCH v2 1/1 xfsprogs: utility changes for 6.12
Hi Andrey/Christoph,
Here are all the unreviewed changes to the xfsprogs utilities that I'd like to get in for 6.12. I'll send a pull request with all the reviewed patches separately; this resend is just to get RVBs for wiring up xfs_db support for realtime volumes in preparation for future rt modernization, and a new patch to add a mkfs config file for 6.12 LTS kernels.
[PATCHSET v5.2 1/2] xfs_db: debug realtime geometry
[PATCH 4/8] xfs_db: access realtime file blocks [PATCH 5/8] xfs_db: access arbitrary realtime blocks and extents [PATCH 6/8] xfs_db: enable conversion of rt space units
[PATCHSET 2/2] mkfs: new config file for 6.12 LTS
[PATCH 1/1] mkfs: add a config file for 6.12 LTS kernels
--D
PATCH 1/2 xfs_db: debug realtime geometry
Hi all,
Before we start modernizing the realtime device, let's first make a few improvements to the XFS debugger to make our lives easier. First up is making it so that users can point the debugger at the block device containing the realtime section, and augmenting the io cursor code to be able to read blocks from the rt device. Next, we add a new geometry conversion command (rtconvert) to make it easier to go back and forth between rt blocks, rt extents, and the corresponding locations within the rt bitmap and summary files.
If you're going to start using this code, I strongly recommend pulling from my git trees, which are linked below.
Comments and questions are, as always, welcome.
xfsprogs git tree:
https://git.kernel.org/cgit/linux/kernel/git/djwong/xfsprogs-dev.git/log/?h=debug-realtime-geometry-6.12
---
Commits in this patchset:
* xfs_db: support passing the realtime device to the debugger
* xfs_db: report the realtime device when associated with each io cursor
* xfs_db: make the daddr command target the realtime device
* xfs_db: access realtime file blocks
* xfs_db: access arbitrary realtime blocks and extents
* xfs_db: enable conversion of rt space units
* xfs_db: convert rtbitmap geometry
* xfs_db: convert rtsummary geometry
--- db/block.c | 171 ++++++++++++++++++++- db/block.h | 20 ++ db/convert.c | 438 ++++++++++++++++++++++++++++++++++++++++++++++++++--- db/faddr.c | 5 - db/init.c | 7 + db/io.c | 39 ++++- db/io.h | 3 db/xfs_admin.sh | 4 man/man8/xfs_db.8 | 131 ++++++++++++++++ 9 files changed, 778 insertions(+), 40 deletions(-)
PATCH 1/8 xfs_db: support passing the realtime device to the debugger
From: Darrick J. Wong <[email protected]>
Create a new -R flag so that sysadmins can pass the realtime device to the xfs debugger. Since we can now have superblocks on the rt device, we need this to be able to inspect/dump/etc.
--- db/init.c | 7 +++++-- db/io.c | 28 +++++++++++++++++++++++----- db/io.h | 2 ++ db/xfs_admin.sh | 4 +++- man/man8/xfs_db.8 | 13 +++++++++++++ 5 files changed, 46 insertions(+), 8 deletions(-)
db/init.c +5 -2
@@ -33,7 +33,7 @@ static voidusage (void) {fprintf (stderr,_ ( -"Usage: %s [-ifFrxV] [-p prog] [-l logdev] [-c cmd]... device\n" +"Usage: %s [-ifFrxV] [-p prog] [-l logdev] [-R rtdev] [-c cmd]... device\n" ), progname);exit (1 ); }
@@ -54,7 +54,7 @@ init(textdomain (PACKAGE ); progname =basename (argv[0 ]); -while ((c =getopt (argc, argv,"c:fFip:rxVl:" )) !=EOF ) { +while ((c =getopt (argc, argv,"c:fFip:rR:xVl:" )) !=EOF ) {switch (c) {case 'c' : cmdline =xrealloc (cmdline, (ncmdline+1 )*sizeof (char *));
@@ -75,6 +75,9 @@ init(case 'r' : x.flags =LIBXFS_ISREADONLY ;break ; +case 'R' : + x.rt.name = optarg; +break ;case 'l' : x.log.name = optarg;break ;
db/io.c +23 -5
@@ -458,6 +458,7 @@ ring_add(void)static void write_cur_buf (void ) { +struct xfs_buftarg *btp = iocur_top->bp->b_target;int ret; ret = -libxfs_bwrite (iocur_top->bp);
@@ -465,7 +466,7 @@ write_cur_buf(void)dbprintf (_ ("write error: %s\n" ),strerror (ret));/* re-read buffer from disk */ - ret = -libxfs_readbufr (mp->m_ddev_targp, iocur_top->bb, iocur_top->bp, + ret = -libxfs_readbufr (btp, iocur_top->bb, iocur_top->bp, iocur_top->blen,0 );if (ret !=0 )dbprintf (_ ("read error: %s\n" ),strerror (ret));
@@ -474,6 +475,7 @@ write_cur_buf(void)static void write_cur_bbs (void ) { +struct xfs_buftarg *btp = iocur_top->bp->b_target;int ret; ret = -libxfs_bwrite (iocur_top->bp);
@@ -482,7 +484,7 @@ write_cur_bbs(void)/* re-read buffer from disk */ - ret = -libxfs_readbufr_map (mp->m_ddev_targp, iocur_top->bp,0 ); + ret = -libxfs_readbufr_map (btp, iocur_top->bp,0 );if (ret !=0 )dbprintf (_ ("read error: %s\n" ),strerror (ret)); }
@@ -541,9 +543,9 @@ static void__set_cur ( struct xfs_buftarg *btargp, const typ_t *type, - xfs_daddr_t blknum, - int len, - int ring_flag, + xfs_daddr_t blknum, + int len, + int ring_flag, bbmap_t *bbmap) { struct xfs_buf *bp;
@@ -647,6 +649,22 @@ set_log_cur(__set_cur (mp->m_logdev_targp, type, blknum, len, ring_flag, bbmap); } +int +set_rt_cur ( +const typ_t *type, +xfs_daddr_t blknum, +int len, +int ring_flag, +bbmap_t *bbmap) +{ +if (!mp->m_rtdev_targp->bt_bdev) { +printf (_ ("realtime device not loaded, use -R.\n" )); +return ENODEV ; + } + +__set_cur (mp->m_rtdev_targp, type, blknum, len, ring_flag, bbmap); +return 0 ; +}void set_iocur_type(
db/io.h +2 -0
@@ -51,6 +51,8 @@ extern void set_cur(const struct typ *type, xfs_daddr_t blknum, int len, int ring_add, bbmap_t *bbmap);extern void set_log_cur (const struct typ *type,xfs_daddr_t blknum,int len,int ring_add,bbmap_t *bbmap); +int set_rt_cur (const struct typ *type,xfs_daddr_t blknum, +int len,int ring_add,bbmap_t *bbmap);extern void ring_add (void );extern void set_iocur_type (const struct typ *type);extern void xfs_dummy_verify (struct xfs_buf *bp);
db/xfs_admin.sh +3 -1
@@ -8,6 +8,7 @@ status=0 require_offline="" require_online="" DB_OPTS="" +DB_DEV_OPTS="" REPAIR_OPTS="" IO_OPTS="" REPAIR_DEV_OPTS=""
@@ -42,6 +43,7 @@ do require_offline=1 ;; r) REPAIR_DEV_OPTS=" -r '$OPTARG'" + DB_DEV_OPTS=" -R '$OPTARG'" require_offline=1 ;; u) DB_OPTS=$DB_OPTS" -r -c uuid"
@@ -89,7 +91,7 @@ case $# in if [ -n "$DB_OPTS" ] then - eval xfs_db -x -p xfs_admin $LOG_OPTS $DB_OPTS "$1" + eval xfs_db -x -p xfs_admin $LOG_OPTS $DB_DEV_OPTS $DB_OPTS "$1" status=$? fi if [ -n "$REPAIR_OPTS" ]
man/man8/xfs_db.8 +13 -0
@@ -14,6 +14,9 @@ .SH SYNOPSIS .B \-l .I logdev ] [ +.B \-R +.I rtdev +] [ .B \-p .I progname ]
@@ -80,6 +83,16 @@ .SH OPTIONS for prompts and some error messages, the default value is .BR xfs_db . .TP +.B -R +.I rtdev +Specifies the device where the realtime data resides. +This is only relevant for filesystems that have a realtime section. +See the +.BR mkfs.xfs "(8) " \-r +option, and refer to +.BR xfs (5) +for a detailed description of the XFS realtime section. +.TP .B -r Open .I device
PATCH 2/8 xfs_db: report the realtime device when associated with each io cursor
In reply to Darrick J. WongFrom: Darrick J. Wong <[email protected]>
When db is reporting on an io cursor and the cursor points to the realtime device, print that fact.
--- db/block.c | 2 ++ db/io.c | 11 +++++++++++ db/io.h | 1 + 3 files changed, 14 insertions(+)
db/block.c +2 -0
@@ -133,6 +133,8 @@ daddr_f(dbprintf (_ ("datadev daddr is %lld\n" ), daddr); else if (iocur_is_extlogdev(iocur_top)) dbprintf(_("logdev daddr is %lld\n"), daddr); + else if (iocur_is_rtdev(iocur_top)) + dbprintf(_("rtdev daddr is %lld\n"), daddr); else dbprintf(_("current daddr is %lld\n"), daddr);
db/io.c +11 -0
@@ -159,6 +159,15 @@ iocur_is_extlogdev(const struct iocur *ioc)return bp->b_target == bp->b_mount->m_logdev_targp; } +bool +iocur_is_rtdev (const struct iocur *ioc) +{ +if (!ioc->bp) +return false; + +return ioc->bp->b_target == ioc->bp->b_mount->m_rtdev_targp; +} + void print_iocur( char *tag,
@@ -171,6 +180,8 @@ print_iocur( block_unit ="fsbno" ; else if (iocur_is_extlogdev(ioc)) block_unit ="logbno" ; + else if (iocur_is_rtdev(ioc)) + block_unit ="rtbno" ;dbprintf ("%s\n" , tag);dbprintf (_ ("\tbyte offset %lld, length %d\n" ), ioc->off, ioc->len);
db/io.h +1 -0
@@ -60,6 +60,7 @@ extern void xfs_verify_recalc_crc(struct xfs_buf *bp);bool iocur_is_ddev (const struct iocur *ioc);bool iocur_is_extlogdev (const struct iocur *ioc); +bool iocur_is_rtdev (const struct iocur *ioc);/* * returns -1 for unchecked, 0 for bad and 1 for good
PATCH 3/8 xfs_db: make the daddr command target the realtime device
In reply to Darrick J. WongFrom: Darrick J. Wong <[email protected]>
Make it so that users can issue the command "daddr -r XXX" to select disk block XXX on the realtime device.
--- db/block.c | 43 ++++++++++++++++++++++++++++++++++++++----- man/man8/xfs_db.8 | 6 +++++- 2 files changed, 43 insertions(+), 6 deletions(-)
db/block.c +38 -5
@@ -31,7 +31,7 @@ static const cmdinfo_t ablock_cmd = {"ablock" ,NULL , ablock_f,1 ,1 ,1 ,N_ ("filoff" ), N_("set address to file offset (attr fork)"), ablock_help };static const cmdinfo_t daddr_cmd = - {"daddr" ,NULL , daddr_f,0 ,1 ,1 ,N_ ("[d]" ), + {"daddr" ,NULL , daddr_f,0 ,-1 ,1 ,N_ ("[d]" ),N_ ("set address to daddr value" ), daddr_help };static const cmdinfo_t dblock_cmd = { "dblock", NULL, dblock_f, 1, 1, 1, N_("filoff"),
@@ -117,16 +117,36 @@ daddr_help(void) )); } +enum daddr_target { +DT_DATA , +DT_RT , +}; +static int daddr_f (int argc,char **argv) { +xfs_rfsblock_t max_daddrs = mp->m_sb.sb_dblocks;int64_t d;char *p;int bb_count =BTOBB (mp->m_sb.sb_sectsize); +int c; +enum daddr_target tgt =DT_DATA ; -if (argc ==1 ) { +while ((c =getopt (argc, argv,"r" )) !=-1 ) { +switch (c) { +case 'r' : + tgt =DT_RT ; + max_daddrs = mp->m_sb.sb_rblocks; +break ; +default : +daddr_help (); +return 0 ; + } + } + +if (optind == argc) {xfs_daddr_t daddr = iocur_top->off >>BBSHIFT ;if (iocur_is_ddev (iocur_top))
@@ -140,14 +160,27 @@ daddr_f(return 0 ; } - d = (int64_t )strtoull (argv[1 ], &p,0 ); + +if (optind != argc -1 ) { +daddr_help (); +return 0 ; + } + + d = (int64_t )strtoull (argv[optind], &p,0 );if (*p !='\0' || - d >= mp->m_sb.sb_dblocks << (mp->m_sb.sb_blocklog -BBSHIFT )) { + d >= max_daddrs << (mp->m_sb.sb_blocklog -BBSHIFT )) {dbprintf (_ ("bad daddr %s\n" ), argv[1 ]);return 0 ; }ASSERT (typtab[TYP_DATA ].typnm ==TYP_DATA ); -set_cur (&typtab[TYP_DATA ], d, bb_count,DB_RING_ADD ,NULL ); +switch (tgt) { +case DT_DATA : +set_cur (&typtab[TYP_DATA ], d, bb_count,DB_RING_ADD ,NULL ); +break ; +case DT_RT : +set_rt_cur (&typtab[TYP_DATA ], d, bb_count,DB_RING_ADD ,NULL ); +break ; + }return 0 ; }
man/man8/xfs_db.8 +5 -1
@@ -671,7 +671,7 @@ .SH COMMANDS Validate and display the current value and state of the structure's CRC. .RE .TP -.BI "daddr [" d ] +.BI "daddr [" -r "] [" d ] Set current address to the daddr (512 byte block) given by .IR d . If no value for
@@ -680,6 +680,10 @@ .SH COMMANDS The type is set to .B data (uninterpreted). + +If an address and the +.B \-r +option are specified, the current address is set to the realtime device. .TP .BI dblock " filoff" Set current address to the offset
PATCH 4/8 xfs_db: access realtime file blocks
In reply to Darrick J. WongFrom: Darrick J. Wong <[email protected]>
Now that we have the ability to point the io cursor at the realtime device, let's make it so that the "dblock" command can walk the contents of realtime files.
--- db/block.c | 17 +++++++++++++++-- db/block.h | 20 ++++++++++++++++++++ db/faddr.c | 5 ++++- 3 files changed, 39 insertions(+), 3 deletions(-)
db/block.c +15 -2
@@ -196,6 +196,13 @@ dblock_help(void) )); } +static inline bool +is_rtfile ( +struct xfs_dinode *dip) +{ +return dip->di_flags &cpu_to_be16 (XFS_DIFLAG_REALTIME ); +} + static int dblock_f( int argc,
@@ -235,8 +242,14 @@ dblock_f(ASSERT (typtab[type].typnm == type);if (nex >1 )make_bbmap (&bbmap, nex, bmp); -set_cur (&typtab[type], (int64_t )XFS_FSB_TO_DADDR (mp, dfsbno), - nb * blkbb,DB_RING_ADD , nex >1 ? &bbmap :NULL ); +if (is_rtfile (iocur_top->data)) +set_rt_cur (&typtab[type],xfs_rtb_to_daddr (mp, dfsbno), + nb * blkbb,DB_RING_ADD , + nex >1 ? &bbmap :NULL ); +else +set_cur (&typtab[type], (int64_t )XFS_FSB_TO_DADDR (mp, dfsbno), + nb * blkbb,DB_RING_ADD , + nex >1 ? &bbmap :NULL );free (bmp);return 0 ; }
db/block.h +20 -0
@@ -3,8 +3,28 @@* Copyright (c) 2000-2001,2005 Silicon Graphics, Inc. * All Rights Reserved. */ +#ifndef __XFS_DB_BLOCK_H +#define __XFS_DB_BLOCK_Hstruct field ;extern void block_init (void );extern void print_block (const struct field *fields,int argc,char **argv); + +static inline xfs_daddr_t +xfs_rtb_to_daddr ( +struct xfs_mount *mp, +xfs_rtblock_t rtb) +{ +return rtb << mp->m_blkbb_log; +} + +static inline xfs_rtblock_t +xfs_daddr_to_rtb ( +struct xfs_mount *mp, +xfs_daddr_t daddr) +{ +return daddr >> mp->m_blkbb_log; +} + +#endif /* __XFS_DB_BLOCK_H */
db/faddr.c +4 -1
@@ -15,6 +15,7 @@#include "bmap.h" #include "output.h" #include "init.h" +#include "block.h" void fa_agblock(
@@ -323,7 +324,9 @@ fa_drtbno(dbprintf (_ ("null block number, cannot set new addr\n" ));return ; } -/* need set_cur to understand rt subvolume */ + +set_rt_cur (&typtab[next],xfs_rtb_to_daddr (mp, bno), blkbb, +DB_RING_ADD ,NULL ); }/*ARGSUSED*/
Re: [PATCH 4/8] xfs_db: access realtime file blocks
Looks good:
PATCH 5/8 xfs_db: access arbitrary realtime blocks and extents
In reply to Darrick J. WongFrom: Darrick J. Wong <[email protected]>
Add two commands to xfs_db so that we can point ourselves at any arbitrary realtime block or extent.
--- db/block.c | 109 +++++++++++++++++++++++++++++++++++++++++++++++++++++ man/man8/xfs_db.8 | 22 +++++++++++ 2 files changed, 131 insertions(+)
db/block.c +109 -0
@@ -25,6 +25,10 @@ static int dblock_f(int argc, char **argv);static void dblock_help (void );static int fsblock_f (int argc,char **argv);static void fsblock_help (void ); +static int rtblock_f (int argc,char **argv); +static void rtblock_help (void ); +static int rtextent_f (int argc,char **argv); +static void rtextent_help (void );static void print_rawdata (void *data,int len); static const cmdinfo_t ablock_cmd =
@@ -39,6 +43,12 @@ static const cmdinfo_t dblock_cmd =static const cmdinfo_t fsblock_cmd = {"fsblock" ,"fsb" , fsblock_f,0 ,1 ,1 ,N_ ("[fsb]" ),N_ ("set address to fsblock value" ), fsblock_help }; +static const cmdinfo_t rtblock_cmd = + {"rtblock" ,"rtbno" , rtblock_f,0 ,1 ,1 ,N_ ("[rtbno]" ), +N_ ("set address to rtblock value" ), rtblock_help }; +static const cmdinfo_t rtextent_cmd = + {"rtextent" ,"rtx" , rtextent_f,0 ,1 ,1 ,N_ ("[rtxno]" ), +N_ ("set address to rtextent value" ), rtextent_help };static void ablock_help (void )
@@ -104,6 +114,8 @@ block_init(void)add_command (&daddr_cmd);add_command (&dblock_cmd);add_command (&fsblock_cmd); +add_command (&rtblock_cmd); +add_command (&rtextent_cmd); } static void
@@ -302,6 +314,103 @@ fsblock_f(return 0 ; } +static void +rtblock_help (void ) +{ +dbprintf (_ ( +"\n Example:\n" +"\n" +" 'rtblock 1023' - sets the file position to the 1023rd block on the realtime\n" +" volume. The filesystem block size is specified in the superblock and set\n" +" during mkfs time.\n\n" +)); +} + +static int +rtblock_f ( +int argc, +char **argv) +{ +xfs_rtblock_t rtbno; +char *p; + +if (argc ==1 ) { +if (!iocur_is_rtdev (iocur_top)) { +dbprintf (_ ("cursor does not point to rt device\n" )); +return 0 ; + } +dbprintf (_ ("current rtblock is %lld\n" ), +xfs_daddr_to_rtb (mp, iocur_top->off >>BBSHIFT )); +return 0 ; + } + rtbno =strtoull (argv[1 ], &p,0 ); +if (*p !='\0' ) { +dbprintf (_ ("bad rtblock %s\n" ), argv[1 ]); +return 0 ; + } +if (rtbno >= mp->m_sb.sb_rblocks) { +dbprintf (_ ("bad rtblock %s\n" ), argv[1 ]); +return 0 ; + } +ASSERT (typtab[TYP_DATA ].typnm ==TYP_DATA ); +set_rt_cur (&typtab[TYP_DATA ],xfs_rtb_to_daddr (mp, rtbno), blkbb, +DB_RING_ADD ,NULL ); +return 0 ; +} + +static void +rtextent_help (void ) +{ +dbprintf (_ ( +"\n Example:\n" +"\n" +" 'rtextent 10' - sets the file position to the 10th extent on the realtime\n" +" volume. The realtime extent size is specified in the superblock and set\n" +" during mkfs or growfs time.\n\n" +)); +} + +/* +* Move the cursor to a specific location on the realtime block device given +* a linear address in units of realtime extents. +*/ +static int +rtextent_f ( +int argc, +char **argv) +{ +xfs_rtblock_t rtbno; +xfs_rtxnum_t rtx; +char *p; + +if (argc ==1 ) { +if (!iocur_is_rtdev (iocur_top)) { +dbprintf (_ ("cursor does not point to rt device\n" )); +return 0 ; + } + + rtbno =xfs_daddr_to_rtb (mp, iocur_top->off >>BBSHIFT ); +dbprintf (_ ("current rtextent is %lld\n" ), +xfs_rtb_to_rtx (mp, rtbno)); +return 0 ; + } + rtx =strtoull (argv[1 ], &p,0 ); +if (*p !='\0' ) { +dbprintf (_ ("bad rtextent %s\n" ), argv[1 ]); +return 0 ; + } +if (rtx >= mp->m_sb.sb_rextents) { +dbprintf (_ ("bad rtextent %s\n" ), argv[1 ]); +return 0 ; + } + + rtbno =xfs_rtx_to_rtb (mp, rtx); +ASSERT (typtab[TYP_DATA ].typnm ==TYP_DATA ); +set_rt_cur (&typtab[TYP_DATA ],xfs_rtb_to_daddr (mp, rtbno), + mp->m_sb.sb_rextsize * blkbb,DB_RING_ADD ,NULL ); +return 0 ; +} + void print_block( const field_t *fields,
man/man8/xfs_db.8 +22 -0
@@ -1099,6 +1099,28 @@ .SH COMMANDS Exit .BR xfs_db . .TP +.BI "rtblock [" rtbno ] +Set current address to the location on the realtime device given by +.IR rtbno . +This value must be a realtime block number. +If no value for +.I rtbno +is given the current address is printed, expressed as an rtbno. +The type is set to +.B data +(uninterpreted). +.TP +.BI "rtextent [" rtxno ] +Set current address to the location on the realtime device given by +.IR rtextent . +This value must be a linear address in units of realtime extents. +If no value for +.I rtextent +is given the current address is printed, expressed as an rtextent. +The type is set to +.B data +(uninterpreted). +.TP .BI "ring [" index ] Show position ring (if no .I index
Re: [PATCH 5/8] xfs_db: access arbitrary realtime blocks and extents
Looks good:
PATCH 6/8 xfs_db: enable conversion of rt space units
In reply to Darrick J. WongFrom: Darrick J. Wong <[email protected]>
Teach the xfs_db convert function about rt extents, rt block numbers, and how to compute offsets within the rt bitmap and summary files.
--- db/convert.c | 253 ++++++++++++++++++++++++++++++++++++++++++++++++----- man/man8/xfs_db.8 | 51 +++++++++++ 2 files changed, 281 insertions(+), 23 deletions(-)
db/convert.c +230 -23
@@ -8,6 +8,7 @@#include "command.h" #include "output.h" #include "init.h" +#include "block.h" #define M (A ) (1 << CT_ ## A)#define agblock_to_bytes (x) \
@@ -26,6 +27,10 @@ agino_to_bytes(XFS_INO_TO_AGINO(mp, (x))))#define inoidx_to_bytes (x) \ ((uint64_t)(x) << mp->m_sb.sb_inodelog) +#define rtblock_to_bytes (x) \ + ((uint64_t)(x) << mp->m_sb.sb_blocklog) +#define rtx_to_rtblock (x) \ + ((uint64_t)(x) * mp->m_sb.sb_rextsize) typedef enum { CT_NONE = -1,
@@ -40,11 +45,12 @@ typedef enum {CT_INO ,/* xfs_ino_t */ CT_INOIDX ,/* index of inode in fsblock */ CT_INOOFF ,/* byte offset in inode */ +CT_RTBLOCK ,/* realtime block */ +CT_RTX ,/* realtime extent */ NCTS } ctype_t;typedef struct ctydesc { -ctype_t ctype;int allowed;const char **names; }ctydesc_t ;
@@ -61,12 +67,16 @@ typedef union {xfs_ino_t ino;int inoidx;int inooff; +xfs_rtblock_t rtblock; +xfs_rtblock_t rtx; } cval_t;static uint64_t bytevalue (ctype_t ctype,cval_t *val); +static int rtconvert_f (int argc,char **argv);static int convert_f (int argc,char **argv);static int getvalue (char *s,ctype_t ctype,cval_t *val); -static ctype_t lookupcty (char *ctyname); +static ctype_t lookupcty (const struct ctydesc *descs, +const char *ctyname);static const char *agblock_names[] = {"agblock" ,"agbno" ,NULL };static const char *agino_names[] = {"agino" ,"aginode" ,NULL };
@@ -74,6 +84,8 @@ static const char *agnumber_names[] = { "agnumber", "agno", NULL };static const char *bboff_names[] = {"bboff" ,"daddroff" ,NULL };static const char *blkoff_names[] = {"blkoff" ,"fsboff" ,"agboff" ,NULL }; +static const char *rtblkoff_names[] = {"blkoff" ,"rtboff" , +NULL };static const char *byte_names[] = {"byte" ,"fsbyte" ,NULL };static const char *daddr_names[] = {"daddr" ,"bb" ,NULL };static const char *fsblock_names[] = {"fsblock" ,"fsb" ,"fsbno" ,NULL };
@@ -81,30 +93,119 @@ static const char *ino_names[] = { "ino", "inode", NULL };static const char *inoidx_names[] = {"inoidx" ,"offset" ,NULL };static const char *inooff_names[] = {"inooff" ,"inodeoff" ,NULL }; +static const char *rtblock_names[] = {"rtblock" ,"rtb" ,"rtbno" ,NULL }; +static const char *rtx_names[] = {"rtx" ,"rtextent" ,NULL }; +static const ctydesc_t ctydescs[NCTS ] = { - {CT_AGBLOCK ,M (AGNUMBER )|M (BBOFF )|M (BLKOFF )|M (INOIDX )|M (INOOFF ), - agblock_names }, - {CT_AGINO ,M (AGNUMBER )|M (INOOFF ), agino_names }, - {CT_AGNUMBER , -M (AGBLOCK )|M (AGINO )|M (BBOFF )|M (BLKOFF )|M (INOIDX )|M (INOOFF ), - agnumber_names }, - {CT_BBOFF ,M (AGBLOCK )|M (AGNUMBER )|M (DADDR )|M (FSBLOCK ), bboff_names }, - {CT_BLKOFF ,M (AGBLOCK )|M (AGNUMBER )|M (FSBLOCK ), blkoff_names }, - {CT_BYTE ,0 , byte_names }, - {CT_DADDR ,M (BBOFF ), daddr_names }, - {CT_FSBLOCK ,M (BBOFF )|M (BLKOFF )|M (INOIDX ), fsblock_names }, - {CT_INO ,M (INOOFF ), ino_names }, - {CT_INOIDX ,M (AGBLOCK )|M (AGNUMBER )|M (FSBLOCK )|M (INOOFF ), - inoidx_names }, - {CT_INOOFF , -M (AGBLOCK )|M (AGINO )|M (AGNUMBER )|M (FSBLOCK )|M (INO )|M (INOIDX ), - inooff_names }, + [CT_AGBLOCK ] = { + .allowed =M (AGNUMBER ) | +M (BBOFF ) | +M (BLKOFF ) | +M (INOIDX ) | +M (INOOFF ), + .names = agblock_names, + }, + [CT_AGINO ] = { + .allowed =M (AGNUMBER ) | +M (INOOFF ), + .names = agino_names, + }, + [CT_AGNUMBER ] = { + .allowed =M (AGBLOCK ) | +M (AGINO ) | +M (BBOFF ) | +M (BLKOFF ) | +M (INOIDX ) | +M (INOOFF ), + .names = agnumber_names, + }, + [CT_BBOFF ] = { + .allowed =M (AGBLOCK ) | +M (AGNUMBER ) | +M (DADDR ) | +M (FSBLOCK ), + .names = bboff_names, + }, + [CT_BLKOFF ] = { + .allowed =M (AGBLOCK ) | +M (AGNUMBER ) | +M (FSBLOCK ), + .names = blkoff_names, + }, + [CT_BYTE ] = { + .allowed =0 , + .names = byte_names, + }, + [CT_DADDR ] = { + .allowed =M (BBOFF ), + .names = daddr_names, + }, + [CT_FSBLOCK ] = { + .allowed =M (BBOFF ) | +M (BLKOFF ) | +M (INOIDX ), + .names = fsblock_names, + }, + [CT_INO ] = { + .allowed =M (INOOFF ), + .names = ino_names, + }, + [CT_INOIDX ] = { + .allowed =M (AGBLOCK ) | +M (AGNUMBER ) | +M (FSBLOCK ) | +M (INOOFF ), + .names = inoidx_names, + }, + [CT_INOOFF ] = { + .allowed =M (AGBLOCK ) | +M (AGINO ) | +M (AGNUMBER ) | +M (FSBLOCK ) | +M (INO ) | +M (INOIDX ), + .names = inooff_names, + }, +}; + +static const ctydesc_t ctydescs_rt[NCTS ] = { + [CT_BBOFF ] = { + .allowed =M (DADDR ) | +M (RTBLOCK ), + .names = bboff_names, + }, + [CT_BLKOFF ] = { + .allowed =M (RTBLOCK ), + .names = rtblkoff_names, + }, + [CT_BYTE ] = { + .allowed =0 , + .names = byte_names, + }, + [CT_DADDR ] = { + .allowed =M (BBOFF ), + .names = daddr_names, + }, + [CT_RTBLOCK ] = { + .allowed =M (BBOFF ) | +M (BLKOFF ), + .names = rtblock_names, + }, + [CT_RTX ] = { + .allowed =M (BBOFF ) | +M (BLKOFF ), + .names = rtx_names, + }, };static const cmdinfo_t convert_cmd = {"convert" ,NULL , convert_f,3 ,9 ,0 ,"type num [type num]... type" ,"convert from one address form to another" ,NULL }; +static const cmdinfo_t rtconvert_cmd = + {"rtconvert" ,NULL , rtconvert_f,3 ,9 ,0 ,"type num [type num]... type" , +"convert from one realtime address form to another" ,NULL }; +static uint64_t bytevalue (ctype_t ctype,cval_t *val) {
@@ -131,6 +232,10 @@ bytevalue(ctype_t ctype, cval_t *val)return inoidx_to_bytes (val->inoidx);case CT_INOOFF :return (uint64_t )val->inooff; +case CT_RTBLOCK : +return rtblock_to_bytes (val->rtblock); +case CT_RTX : +return rtblock_to_bytes (rtx_to_rtblock (val->rtx));case CT_NONE :case NCTS :break ;
@@ -159,13 +264,13 @@ convert_f(int argc, char **argv) "arguments\n"), argc);return 0 ; } -if ((wtype =lookupcty (argv[argc -1 ])) ==CT_NONE ) { +if ((wtype =lookupcty (ctydescs, argv[argc -1 ])) ==CT_NONE ) {dbprintf (_ ("unknown conversion type %s\n" ), argv[argc -1 ]);return 0 ; }for (i = mask = conmask =0 ; i < (argc -1 ) /2 ; i++) { - c =lookupcty (argv[i *2 ]); + c =lookupcty (ctydescs, argv[i *2 ]);if (c ==CT_NONE ) {dbprintf (_ ("unknown conversion type %s\n" ), argv[i *2 ]);return 0 ;
@@ -230,6 +335,99 @@ convert_f(int argc, char **argv)case CT_INOOFF : v &= mp->m_sb.sb_inodesize -1 ;break ; +case CT_RTBLOCK : +case CT_RTX : +/* shouldn't get here */ +ASSERT (0 ); +break ; +case CT_NONE : +case NCTS : +/* NOTREACHED */ +break ; + } +dbprintf ("0x%llx (%llu)\n" , v, v); +return 0 ; +} + +static int +rtconvert_f (int argc,char **argv) +{ +ctype_t c; +int conmask; +cval_t cvals[NCTS ] = {}; +int i; +int mask; +uint64_t v; +ctype_t wtype; + +/* move past the "rtconvert" command */ + argc--; + argv++; + +if ((argc %2 ) !=1 ) { +dbprintf (_ ("bad argument count %d to rtconvert, expected 3,5,7,9 " +"arguments\n" ), argc); +return 0 ; + } +if ((wtype =lookupcty (ctydescs_rt, argv[argc -1 ])) ==CT_NONE ) { +dbprintf (_ ("unknown conversion type %s\n" ), argv[argc -1 ]); +return 0 ; + } + +for (i = mask = conmask =0 ; i < (argc -1 ) /2 ; i++) { + c =lookupcty (ctydescs_rt, argv[i *2 ]); +if (c ==CT_NONE ) { +dbprintf (_ ("unknown conversion type %s\n" ), argv[i *2 ]); +return 0 ; + } +if (c == wtype) { +dbprintf (_ ("result type same as argument\n" )); +return 0 ; + } +if (conmask & (1 << c)) { +dbprintf (_ ("conflicting conversion type %s\n" ), + argv[i *2 ]); +return 0 ; + } +if (!getvalue (argv[i *2 +1 ], c, &cvals[c])) +return 0 ; + mask |=1 << c; + conmask |= ~ctydescs_rt[c].allowed; + } + v =0 ; +for (c = (ctype_t )0 ; c <NCTS ; c++) { +if (!(mask & (1 << c))) +continue ; + v +=bytevalue (c, &cvals[c]); + } +switch (wtype) { +case CT_BBOFF : + v &=BBMASK ; +break ; +case CT_BLKOFF : + v &= mp->m_blockmask; +break ; +case CT_BYTE : +break ; +case CT_DADDR : + v >>=BBSHIFT ; +break ; +case CT_RTBLOCK : + v =xfs_daddr_to_rtb (mp, v >>BBSHIFT ); +break ; +case CT_RTX : + v =xfs_daddr_to_rtb (mp, v >>BBSHIFT ) / mp->m_sb.sb_rextsize; +break ; +case CT_AGBLOCK : +case CT_AGINO : +case CT_AGNUMBER : +case CT_FSBLOCK : +case CT_INO : +case CT_INOIDX : +case CT_INOOFF : +/* shouldn't get here */ +ASSERT (0 ); +break ;case CT_NONE :case NCTS :/* NOTREACHED */
@@ -243,6 +441,7 @@ voidconvert_init (void) {add_command (&convert_cmd); +add_command (&rtconvert_cmd); } static int
@@ -290,6 +489,12 @@ getvalue(char *s, ctype_t ctype, cval_t *val)case CT_INOOFF : val->inooff = (int )v;break ; +case CT_RTBLOCK : + val->rtblock = (xfs_rtblock_t )v; +break ; +case CT_RTX : + val->rtx = (xfs_rtblock_t )v; +break ;case CT_NONE :case NCTS :/* NOTREACHED */
@@ -299,13 +504,15 @@ getvalue(char *s, ctype_t ctype, cval_t *val) }static ctype_t -lookupcty (char *ctyname) +lookupcty ( +const struct ctydesc *descs, +const char *ctyname) {ctype_t cty;const char **name;for (cty = (ctype_t )0 ; cty <NCTS ; cty++) { -for (name = ctydescs[cty].names; *name; name++) { +for (name = descs[cty].names; name && *name; name++) {if (strcmp (ctyname, *name) ==0 )return cty; }
man/man8/xfs_db.8 +51 -0
57 lines not on this page · raw message
Re: [PATCH 6/8] xfs_db: enable conversion of rt space units
Looks good:
PATCH 7/8 xfs_db: convert rtbitmap geometry
In reply to Darrick J. WongFrom: Darrick J. Wong <[email protected]>
Teach the rtconvert command to be able to convert realtime blocks and extents to locations within the rt bitmap.
--- db/convert.c | 40 ++++++++++++++++++++++++++++++++++++++++ man/man8/xfs_db.8 | 10 ++++++++++ 2 files changed, 50 insertions(+)
db/convert.c +40 -0
@@ -31,6 +31,10 @@ ((uint64_t)(x) << mp->m_sb.sb_blocklog)#define rtx_to_rtblock (x) \ ((uint64_t)(x) * mp->m_sb.sb_rextsize) +#define rbmblock_to_bytes (x) \ + rtblock_to_bytes(rtx_to_rtblock(xfs_rbmblock_to_rtx(mp, (uint64_t)x))) +#define rbmword_to_bytes (x) \ + rtblock_to_bytes(rtx_to_rtblock((uint64_t)(x) << XFS_NBWORDLOG)) typedef enum { CT_NONE = -1,
@@ -47,6 +51,8 @@ typedef enum {CT_INOOFF ,/* byte offset in inode */ CT_RTBLOCK ,/* realtime block */ CT_RTX ,/* realtime extent */ +CT_RBMBLOCK ,/* block within rt bitmap */ +CT_RBMWORD ,/* word within rt bitmap */ NCTS } ctype_t;
@@ -69,6 +75,8 @@ typedef union {int inooff;xfs_rtblock_t rtblock;xfs_rtblock_t rtx; +xfs_fileoff_t rbmblock; +unsigned int rbmword; } cval_t;static uint64_t bytevalue (ctype_t ctype,cval_t *val);
@@ -95,6 +103,8 @@ static const char *inooff_names[] = { "inooff", "inodeoff", NULL };static const char *rtblock_names[] = {"rtblock" ,"rtb" ,"rtbno" ,NULL };static const char *rtx_names[] = {"rtx" ,"rtextent" ,NULL }; +static const char *rbmblock_names[] = {"rbmblock" ,"rbmb" ,NULL }; +static const char *rbmword_names[] = {"rbmword" ,"rbmw" ,NULL };static const ctydesc_t ctydescs[NCTS ] = { [CT_AGBLOCK ] = {
@@ -196,6 +206,14 @@ static const ctydesc_t ctydescs_rt[NCTS] = {M (BLKOFF ), .names = rtx_names, }, + [CT_RBMBLOCK] = { + .allowed =M (RBMWORD ), + .names = rbmblock_names, + }, + [CT_RBMWORD ] = { + .allowed =M (RBMBLOCK ), + .names = rbmword_names, + }, }; static const cmdinfo_t convert_cmd =
@@ -236,6 +254,10 @@ bytevalue(ctype_t ctype, cval_t *val)return rtblock_to_bytes (val->rtblock);case CT_RTX :return rtblock_to_bytes (rtx_to_rtblock (val->rtx)); +case CT_RBMBLOCK : +return rbmblock_to_bytes (val->rbmblock); +case CT_RBMWORD : +return rbmword_to_bytes (val->rbmword);case CT_NONE :case NCTS :break ;
@@ -337,6 +359,8 @@ convert_f(int argc, char **argv)break ;case CT_RTBLOCK :case CT_RTX : +case CT_RBMBLOCK : +case CT_RBMWORD :/* shouldn't get here */ ASSERT (0 );break ;
@@ -418,6 +442,16 @@ rtconvert_f(int argc, char **argv)case CT_RTX : v =xfs_daddr_to_rtb (mp, v >>BBSHIFT ) / mp->m_sb.sb_rextsize;break ; +case CT_RBMBLOCK : + v =xfs_rtx_to_rbmblock (mp, +xfs_rtb_to_rtx (mp, +xfs_daddr_to_rtb (mp, v >>BBSHIFT ))); +break ; +case CT_RBMWORD : + v =xfs_rtx_to_rbmword (mp, +xfs_rtb_to_rtx (mp, +xfs_daddr_to_rtb (mp, v >>BBSHIFT ))); +break ;case CT_AGBLOCK :case CT_AGINO :case CT_AGNUMBER :
@@ -495,6 +529,12 @@ getvalue(char *s, ctype_t ctype, cval_t *val)case CT_RTX : val->rtx = (xfs_rtblock_t )v;break ; +case CT_RBMBLOCK : + val->rbmblock = (xfs_fileoff_t )v; +break ; +case CT_RBMWORD : + val->rbmword = (unsigned int )v; +break ;case CT_NONE :case NCTS :/* NOTREACHED */
man/man8/xfs_db.8 +10 -0
@@ -1173,6 +1173,16 @@ .SH COMMANDS or .B rtextent (realtime extent) +.HP +.B rbmblock +or +.B rbmb +(realtime bitmap block) +.HP +.B rbmword +or +.B rbmw +(32-bit word within a realtime bitmap block) .PD .RE .IP
PATCH 8/8 xfs_db: convert rtsummary geometry
In reply to Darrick J. WongFrom: Darrick J. Wong <[email protected]>
Teach the rtconvert command to be able to convert realtime blocks and extents to locations within the rt summary.
--- db/convert.c | 161 ++++++++++++++++++++++++++++++++++++++++++++++++++--- man/man8/xfs_db.8 | 29 ++++++++++ 2 files changed, 182 insertions(+), 8 deletions(-)
db/convert.c +153 -8
@@ -53,6 +53,9 @@ typedef enum {CT_RTX ,/* realtime extent */ CT_RBMBLOCK ,/* block within rt bitmap */ CT_RBMWORD ,/* word within rt bitmap */ +CT_RSUMBLOCK ,/* block within rt summary */ +CT_RSUMLOG ,/* log level for rtsummary computations */ +CT_RSUMINFO ,/* info word within rt summary */ NCTS } ctype_t;
@@ -77,6 +80,7 @@ typedef union {xfs_rtblock_t rtx;xfs_fileoff_t rbmblock;unsigned int rbmword; +xfs_fileoff_t rsumblock; } cval_t;static uint64_t bytevalue (ctype_t ctype,cval_t *val);
@@ -105,6 +109,12 @@ static const char *rtblock_names[] = { "rtblock", "rtb", "rtbno", NULL };static const char *rtx_names[] = {"rtx" ,"rtextent" ,NULL };static const char *rbmblock_names[] = {"rbmblock" ,"rbmb" ,NULL };static const char *rbmword_names[] = {"rbmword" ,"rbmw" ,NULL }; +static const char *rsumblock_names[] = {"rsumblock" ,"rsmb" ,NULL }; +static const char *rsumlog_names[] = {"rsumlog" ,"rsml" ,NULL }; +static const char *rsumword_names[] = {"rsuminfo" ,"rsmi" ,NULL }; + +static int rsuminfo; +static int rsumlog;static const ctydesc_t ctydescs[NCTS ] = { [CT_AGBLOCK ] = {
@@ -181,39 +191,60 @@ static const ctydesc_t ctydescs[NCTS] = {static const ctydesc_t ctydescs_rt[NCTS ] = { [CT_BBOFF ] = { .allowed =M (DADDR ) | -M (RTBLOCK ), +M (RTBLOCK ) | +M (RSUMLOG ), .names = bboff_names, }, [CT_BLKOFF ] = { - .allowed =M (RTBLOCK ), + .allowed =M (RTBLOCK ) | +M (RSUMLOG ), .names = rtblkoff_names, }, [CT_BYTE ] = { - .allowed =0 , + .allowed =M (RSUMLOG ), .names = byte_names, }, [CT_DADDR ] = { - .allowed =M (BBOFF ), + .allowed =M (BBOFF ) | +M (RSUMLOG ), .names = daddr_names, }, [CT_RTBLOCK ] = { .allowed =M (BBOFF ) | -M (BLKOFF ), +M (BLKOFF ) | +M (RSUMLOG ), .names = rtblock_names, }, [CT_RTX ] = { .allowed =M (BBOFF ) | -M (BLKOFF ), +M (BLKOFF ) | +M (RSUMLOG ), .names = rtx_names, }, [CT_RBMBLOCK ] = { - .allowed =M (RBMWORD ), + .allowed =M (RBMWORD ) | +M (RSUMLOG ), .names = rbmblock_names, }, [CT_RBMWORD ] = { - .allowed =M (RBMBLOCK ), + .allowed =M (RBMBLOCK ) | +M (RSUMLOG ), .names = rbmword_names, }, +/* must be specified in order rsumlog -> rsuminfo -> rsumblock */ + [CT_RSUMBLOCK ] = { + .allowed =0 , + .names = rsumblock_names, + }, + [CT_RSUMLOG ] = { + .allowed =M (RSUMINFO ) | +M (RSUMBLOCK ), + .names = rsumlog_names, + }, + [CT_RSUMINFO ] = { + .allowed =M (RSUMBLOCK ), + .names = rsumword_names, + }, }; static const cmdinfo_t convert_cmd =
@@ -224,6 +255,39 @@ static const cmdinfo_t rtconvert_cmd = {"rtconvert" ,NULL , rtconvert_f,3 ,9 ,0 ,"type num [type num]... type" , "convert from one realtime address form to another", NULL }; +static inline uint64_t +rsumblock_to_bytes ( +xfs_fileoff_t rsumblock) +{ +/* +* We compute the rt summary file block with this formula: +* sumoffs = (log2len * sb_rbmblocks) + rbmblock; +* sumblock = sumoffs / blockwsize; +* +* Hence the return value is the inverse of this: +* sumoffs = (rsumblock * blockwsize) + rsuminfo; +* rbmblock = sumoffs % (log2len * sb_rbmblocks); +*/ +xfs_rtsumoff_t sumoff; +xfs_fileoff_t rbmblock; + +if (rsumlog <0 ) { +dbprintf (_ ("need to set rsumlog\n" )); +return 0 ; + } +if (rsuminfo <0 ) { +dbprintf (_ ("need to set rsuminfo\n" )); +return 0 ; + } + + sumoff = rsuminfo + (rsumblock * mp->m_blockwsize); +if (rsumlog) + rbmblock = sumoff % (rsumlog * mp->m_sb.sb_rbmblocks); +else + rbmblock = sumoff; +return rbmblock_to_bytes (rbmblock); +} +static uint64_t bytevalue (ctype_t ctype,cval_t *val) {
@@ -258,6 +322,16 @@ bytevalue(ctype_t ctype, cval_t *val)return rbmblock_to_bytes (val->rbmblock);case CT_RBMWORD :return rbmword_to_bytes (val->rbmword); +case CT_RSUMBLOCK : +return rsumblock_to_bytes (val->rbmblock); +case CT_RSUMLOG : +case CT_RSUMINFO : +/* +* These have to specified before rsumblock, and are stored in +* global variables. Hence they do not adjust the disk address +* value. +*/ +return 0 ;case CT_NONE :case NCTS :break ;
@@ -361,6 +435,9 @@ convert_f(int argc, char **argv)case CT_RTX :case CT_RBMBLOCK :case CT_RBMWORD : +case CT_RSUMBLOCK : +case CT_RSUMLOG : +case CT_RSUMINFO :/* shouldn't get here */ ASSERT (0 );break ;
@@ -373,6 +450,52 @@ convert_f(int argc, char **argv)return 0 ; } +static inline uint64_t +rt_daddr_to_rsumblock ( +struct xfs_mount *mp, +uint64_t input) +{ +xfs_rtblock_t rtbno; +xfs_rtxnum_t rtx; +xfs_fileoff_t rbmblock; +xfs_rtsumoff_t rsumoff; + +if (rsumlog <0 ) { +dbprintf (_ ("need to set rsumlog\n" )); +return 0 ; + } + + rtbno =xfs_daddr_to_rtb (mp, input >>BBSHIFT ); + rtx =xfs_rtb_to_rtx (mp, rtbno); + rbmblock =xfs_rtx_to_rbmblock (mp, rtx); + rsumoff =xfs_rtsumoffs (mp, rsumlog, rbmblock); + +return xfs_rtsumoffs_to_block (mp, rsumoff); +} + +static inline uint64_t +rt_daddr_to_rsuminfo ( +struct xfs_mount *mp, +uint64_t input) +{ +xfs_rtblock_t rtbno; +xfs_rtxnum_t rtx; +xfs_fileoff_t rbmblock; +xfs_rtsumoff_t rsumoff; + +if (rsumlog <0 ) { +dbprintf (_ ("need to set rsumlog\n" )); +return 0 ; + } + + rtbno =xfs_daddr_to_rtb (mp, input >>BBSHIFT ); + rtx =xfs_rtb_to_rtx (mp, rtbno); + rbmblock =xfs_rtx_to_rbmblock (mp, rtx); + rsumoff =xfs_rtsumoffs (mp, rsumlog, rbmblock); + +return xfs_rtsumoffs_to_infoword (mp, rsumoff); +} +static int rtconvert_f (int argc,char **argv) {
@@ -384,6 +507,9 @@ rtconvert_f(int argc, char **argv)uint64_t v;ctype_t wtype; + rsumlog =-1 ; + rsuminfo =-1 ; +/* move past the "rtconvert" command */ argc--; argv++;
@@ -452,6 +578,16 @@ rtconvert_f(int argc, char **argv)xfs_rtb_to_rtx (mp, xfs_daddr_to_rtb(mp, v >> BBSHIFT)));break ; +case CT_RSUMBLOCK : + v =rt_daddr_to_rsumblock (mp, v); +break ; +case CT_RSUMLOG : +dbprintf (_ ("cannot convert to rsumlog\n" )); +return 0 ; +break ; +case CT_RSUMINFO : + v =rt_daddr_to_rsuminfo (mp, v); +break ;case CT_AGBLOCK :case CT_AGINO :case CT_AGNUMBER :
@@ -535,6 +671,15 @@ getvalue(char *s, ctype_t ctype, cval_t *val)case CT_RBMWORD : val->rbmword = (unsigned int )v;break ; +case CT_RSUMBLOCK : + val->rsumblock = (xfs_fileoff_t )v; +break ; +case CT_RSUMLOG : + rsumlog = (unsigned int )v; +break ; +case CT_RSUMINFO : + rsuminfo = (unsigned int )v; +break ;case CT_NONE :case NCTS :/* NOTREACHED */
man/man8/xfs_db.8 +29 -0
@@ -1183,10 +1183,39 @@ .SH COMMANDS or .B rbmw (32-bit word within a realtime bitmap block) +.HP +.B rsumblock +or +.B rsmb +(realtime summary file block) +.HP +.B rsuminfo +or +.B rsmi +(32-bit counter within a realtime summary block) +.HP +.B rsumlog +or +.B rsml +(log2len parameter used for summary file offset computations) .PD .RE .IP Only conversions that "make sense" are allowed. + +Realtime summary file location conversions have the following rules: +Each info word in the rt summary file counts the number of free extents of a +given log2(length) that start in a given rt bitmap block. + +To compute summary file location information for a given rt bitmap block, a +log2(extent length) must be specified as the last type/number pair before the +conversion type, and the type must be +.BR rsumlog . + +To compute the rt bitmap block from summary file location, the type/number pairs +must be specified exactly in the order +.BR rsumlog ", " rsuminfo ", " rsumblock . + .TP .BI "sb [" agno ] Set current address to SB header in allocation group
PATCH 2/2 mkfs: new config file for 6.12 LTS
In reply to Darrick J. WongHi all,
New mkfs config file for 6.12 LTS.
If you're going to start using this code, I strongly recommend pulling from my git trees, which are linked below.
Comments and questions are, as always, welcome.
xfsprogs git tree:
https://git.kernel.org/cgit/linux/kernel/git/djwong/xfsprogs-dev.git/log/?h=mkfs-configs-6.12
---
Commits in this patchset:
* mkfs: add a config file for 6.12 LTS kernels
--- mkfs/Makefile | 3 ++- mkfs/lts_6.12.conf | 19 +++++++++++++++++++ 2 files changed, 21 insertions(+), 1 deletion(-) create mode 100644 mkfs/lts_6.12.conf
PATCH 1/1 mkfs: add a config file for 6.12 LTS kernels
From: Darrick J. Wong <[email protected]>
We didn't add any new ondisk features in 2023, so the config file is the same.
--- mkfs/Makefile | 3 ++- mkfs/lts_6.12.conf | 19 +++++++++++++++++++ 2 files changed, 21 insertions(+), 1 deletion(-) create mode 100644 mkfs/lts_6.12.conf
mkfs/Makefile +2 -1
@@ -16,7 +16,8 @@ CFGFILES = \ lts_5.10.conf \ lts_5.15.conf \ lts_6.1.conf \ - lts_6.6.conf + lts_6.6.conf \ + lts_6.12.conf LLDLIBS += $(LIBXFS) $(LIBXCMD) $(LIBFROG) $(LIBRT) $(LIBBLKID) \ $(LIBUUID) $(LIBINIH) $(LIBURCU) $(LIBPTHREAD)
mkfs/lts_6.12.conf new file +19 -0
@@ -0,0 +1,19 @@ +# V5 features that were the mkfs defaults when the upstream Linux 6.12 LTS +# kernel was released at the end of 2024. + +[metadata] +bigtime=1 +crc=1 +finobt=1 +inobtcount=1 +reflink=1 +rmapbt=1 +autofsck=0 + +[inode] +sparse=1 +nrext64=1 +exchange=0 + +[naming] +parent=0
Re: [PATCH 1/1] mkfs: add a config file for 6.12 LTS kernels
Looks good: