Skip to contentSkip to conversation

bpf: Add open coded version of kmem_cache iterator

PATCH Superseded Namhyung Kim 2 participants 5 messages Oct 24, 2024 – Oct 30, 2024

Subsystems (5)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 bpf: Add open coded version of kmem_cache iterator

Add a new open coded iterator for kmem_cache which can be called from a BPF program like below. It doesn't take any argument and traverses all kmem_cache entries.

struct kmem_cache *pos;

  bpf_for_each(kmem_cache, pos) {
      ...
  }

As it needs to grab slab_mutex, it should be called from sleepable BPF programs only.

Also update the existing iterator code to use the open coded version internally as suggested by Andrii.

---
v2)
* prevent restart after the last element (Martin)
* update existing code to use the open coded version (Andrii)

 kernel/bpf/helpers.c         |   3 +
 kernel/bpf/kmem_cache_iter.c | 151 +++++++++++++++++++++++++----------
 2 files changed, 110 insertions(+), 44 deletions(-)
kernel/bpf/helpers.c +3 -0
index 5c3fdb29c1b1fe53..ddddb060835bac4b 100644
@@ -3112,6 +3112,9 @@ BTF_ID_FLAGS(func, bpf_iter_bits_next, KF_ITER_NEXT | KF_RET_NULL)
 BTF_ID_FLAGS(func, bpf_iter_bits_destroy, KF_ITER_DESTROY)
 BTF_ID_FLAGS(func, bpf_copy_from_user_str, KF_SLEEPABLE)
 BTF_ID_FLAGS(func, bpf_get_kmem_cache)
+BTF_ID_FLAGS(func, bpf_iter_kmem_cache_new, KF_ITER_NEW | KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_iter_kmem_cache_next, KF_ITER_NEXT | KF_RET_NULL | KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_iter_kmem_cache_destroy, KF_ITER_DESTROY | KF_SLEEPABLE)
 BTF_KFUNCS_END(common_btf_ids)
 
 static const struct btf_kfunc_id_set common_kfunc_set = {
kernel/bpf/kmem_cache_iter.c +107 -44

200 lines not on this page · raw message

Signature · 1 line
2.47.0.105.g07ac214952-goog
#1 lore raw

PATCH v2 2/2 selftests/bpf: Add a test for open coded kmem_cache iter

The new subtest is attached to sleepable fentry of syncfs() syscall. It iterates the kmem_cache using bpf_for_each loop and count the number of entries. Finally it checks it with the number of entries from the regular iterator.

  $ ./vmtest.sh -- ./test_progs -t kmem_cache_iter
  ...
  #130/1   kmem_cache_iter/check_task_struct:OK
  #130/2   kmem_cache_iter/check_slabinfo:OK
  #130/3   kmem_cache_iter/open_coded_iter:OK
  #130     kmem_cache_iter:OK
  Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED

Also simplify the code by using attach routine of the skeleton.

---
v2)
* remove unnecessary detach (Martin)
* check pid in syncfs to prevent surprise (Martin)
* remove unnecessary local variable (Andrii)

 .../testing/selftests/bpf/bpf_experimental.h  |  6 ++++
 .../bpf/prog_tests/kmem_cache_iter.c          | 28 +++++++++++--------
 .../selftests/bpf/progs/kmem_cache_iter.c     | 28 +++++++++++++++++++
 3 files changed, 50 insertions(+), 12 deletions(-)
tools/testing/selftests/bpf/bpf_experimental.h +6 -0
index b0668f29f7b394eb..cd8ecd39c3f3c68d 100644
@@ -582,4 +582,10 @@ extern int bpf_wq_set_callback_impl(struct bpf_wq *wq,
 		unsigned int flags__k, void *aux__ign) __ksym;
 #define bpf_wq_set_callback(timer, cb, flags) \
 	bpf_wq_set_callback_impl(timer, cb, flags, NULL)
+
+struct bpf_iter_kmem_cache;
+extern int bpf_iter_kmem_cache_new(struct bpf_iter_kmem_cache *it) __weak __ksym;
+extern struct kmem_cache *bpf_iter_kmem_cache_next(struct bpf_iter_kmem_cache *it) __weak __ksym;
+extern void bpf_iter_kmem_cache_destroy(struct bpf_iter_kmem_cache *it) __weak __ksym;
+
 #endif
tools/testing/selftests/bpf/prog_tests/kmem_cache_iter.c +16 -12
index 848d8fc9171fae45..778b55bc1f912b98 100644
@@ -68,12 +68,20 @@ static void subtest_kmem_cache_iter_check_slabinfo(struct kmem_cache_iter *skel)
 	fclose(fp);
 }
 
+static void subtest_kmem_cache_iter_open_coded(struct kmem_cache_iter *skel)
+{
+	skel->bss->tgid = getpid();
+
+	/* To trigger the open coded iterator attached to the syscall */
+	syncfs(0);
+
+	/* It should be same as we've seen from the explicit iterator */
+	ASSERT_EQ(skel->bss->open_coded_seen, skel->bss->kmem_cache_seen, "open_code_seen_eq");
+}
+
 void test_kmem_cache_iter(void)
 {
-	DECLARE_LIBBPF_OPTS(bpf_iter_attach_opts, opts);
 	struct kmem_cache_iter *skel = NULL;
-	union bpf_iter_link_info linfo = {};
-	struct bpf_link *link;
 	char buf[256];
 	int iter_fd;
 
@@ -81,16 +89,12 @@ void test_kmem_cache_iter(void)
 	if (!ASSERT_OK_PTR(skel, "kmem_cache_iter__open_and_load"))
 		return;
 
-	opts.link_info = &linfo;
-	opts.link_info_len = sizeof(linfo);
-
-	link = bpf_program__attach_iter(skel->progs.slab_info_collector, &opts);
-	if (!ASSERT_OK_PTR(link, "attach_iter"))
+	if (!ASSERT_OK(kmem_cache_iter__attach(skel), "skel_attach"))
 		goto destroy;
 
-	iter_fd = bpf_iter_create(bpf_link__fd(link));
+	iter_fd = bpf_iter_create(bpf_link__fd(skel->links.slab_info_collector));
 	if (!ASSERT_GE(iter_fd, 0, "iter_create"))
-		goto free_link;
+		goto destroy;
 
 	memset(buf, 0, sizeof(buf));
 	while (read(iter_fd, buf, sizeof(buf) > 0)) {
@@ -105,11 +109,11 @@ void test_kmem_cache_iter(void)
 		subtest_kmem_cache_iter_check_task_struct(skel);
 	if (test__start_subtest("check_slabinfo"))
 		subtest_kmem_cache_iter_check_slabinfo(skel);
+	if (test__start_subtest("open_coded_iter"))
+		subtest_kmem_cache_iter_open_coded(skel);
 
 	close(iter_fd);
 
-free_link:
-	bpf_link__destroy(link);
 destroy:
 	kmem_cache_iter__destroy(skel);
 }
tools/testing/selftests/bpf/progs/kmem_cache_iter.c +28 -0
index 72c9dafecd98406b..e62807caa7593604 100644
@@ -2,6 +2,8 @@
 /* Copyright (c) 2024 Google */
 
 #include "bpf_iter.h"
+#include "bpf_experimental.h"
+#include "bpf_misc.h"
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
 
@@ -30,9 +32,12 @@ struct {
 
 extern struct kmem_cache *bpf_get_kmem_cache(u64 addr) __ksym;
 
+unsigned int tgid;
+
 /* Result, will be checked by userspace */
 int task_struct_found;
 int kmem_cache_seen;
+int open_coded_seen;
 
 SEC("iter/kmem_cache")
 int slab_info_collector(struct bpf_iter__kmem_cache *ctx)
@@ -85,3 +90,26 @@ int BPF_PROG(check_task_struct)
 		task_struct_found = -2;
 	return 0;
 }
+
+SEC("fentry.s/" SYS_PREFIX "sys_syncfs")
+int open_coded_iter(const void *ctx)
+{
+	struct kmem_cache *s;
+
+	if (tgid != bpf_get_current_pid_tgid() >> 32)
+		return 0;
+
+	bpf_for_each(kmem_cache, s) {
+		struct kmem_cache_result *r;
+
+		r = bpf_map_lookup_elem(&slab_result, &open_coded_seen);
+		if (!r)
+			break;
+
+		open_coded_seen++;
+
+		if (r->obj_size != s->size)
+			break;
+	}
+	return 0;
+}
Signature · 1 line
2.47.0.105.g07ac214952-goog
#2 lore raw

Re: [PATCH v2 bpf-next 2/2] selftests/bpf: Add a test for open coded kmem_cache iter

Quoted 133 lines · Namhyung Kim

The new subtest is attached to sleepable fentry of syncfs() syscall. It iterates the kmem_cache using bpf_for_each loop and count the number of entries. Finally it checks it with the number of entries from the regular iterator.

  $ ./vmtest.sh -- ./test_progs -t kmem_cache_iter
  ...
  #130/1   kmem_cache_iter/check_task_struct:OK
  #130/2   kmem_cache_iter/check_slabinfo:OK
  #130/3   kmem_cache_iter/open_coded_iter:OK
  #130     kmem_cache_iter:OK
  Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED

Also simplify the code by using attach routine of the skeleton.

---
v2)
* remove unnecessary detach (Martin)
* check pid in syncfs to prevent surprise (Martin)
* remove unnecessary local variable (Andrii)

 .../testing/selftests/bpf/bpf_experimental.h  |  6 ++++
 .../bpf/prog_tests/kmem_cache_iter.c          | 28 +++++++++++--------
 .../selftests/bpf/progs/kmem_cache_iter.c     | 28 +++++++++++++++++++
 3 files changed, 50 insertions(+), 12 deletions(-)
tools/testing/selftests/bpf/bpf_experimental.h +6 -0
index b0668f29f7b394eb..cd8ecd39c3f3c68d 100644
@@ -582,4 +582,10 @@ extern int bpf_wq_set_callback_impl(struct bpf_wq *wq,
                unsigned int flags__k, void *aux__ign) __ksym;
 #define bpf_wq_set_callback(timer, cb, flags) \
        bpf_wq_set_callback_impl(timer, cb, flags, NULL)
+
+struct bpf_iter_kmem_cache;
+extern int bpf_iter_kmem_cache_new(struct bpf_iter_kmem_cache *it) __weak __ksym;
+extern struct kmem_cache *bpf_iter_kmem_cache_next(struct bpf_iter_kmem_cache *it) __weak __ksym;
+extern void bpf_iter_kmem_cache_destroy(struct bpf_iter_kmem_cache *it) __weak __ksym;
+
 #endif
tools/testing/selftests/bpf/prog_tests/kmem_cache_iter.c +16 -12
index 848d8fc9171fae45..778b55bc1f912b98 100644
@@ -68,12 +68,20 @@ static void subtest_kmem_cache_iter_check_slabinfo(struct kmem_cache_iter *skel)
        fclose(fp);
 }
 
+static void subtest_kmem_cache_iter_open_coded(struct kmem_cache_iter *skel)
+{
+       skel->bss->tgid = getpid();
+
+       /* To trigger the open coded iterator attached to the syscall */
+       syncfs(0);
+
+       /* It should be same as we've seen from the explicit iterator */
+       ASSERT_EQ(skel->bss->open_coded_seen, skel->bss->kmem_cache_seen, "open_code_seen_eq");
+}
+
 void test_kmem_cache_iter(void)
 {
-       DECLARE_LIBBPF_OPTS(bpf_iter_attach_opts, opts);
        struct kmem_cache_iter *skel = NULL;
-       union bpf_iter_link_info linfo = {};
-       struct bpf_link *link;
        char buf[256];
        int iter_fd;
 
@@ -81,16 +89,12 @@ void test_kmem_cache_iter(void)
        if (!ASSERT_OK_PTR(skel, "kmem_cache_iter__open_and_load"))
                return;
 
-       opts.link_info = &linfo;
-       opts.link_info_len = sizeof(linfo);
-
-       link = bpf_program__attach_iter(skel->progs.slab_info_collector, &opts);
-       if (!ASSERT_OK_PTR(link, "attach_iter"))
+       if (!ASSERT_OK(kmem_cache_iter__attach(skel), "skel_attach"))
                goto destroy;
 
-       iter_fd = bpf_iter_create(bpf_link__fd(link));
+       iter_fd = bpf_iter_create(bpf_link__fd(skel->links.slab_info_collector));
        if (!ASSERT_GE(iter_fd, 0, "iter_create"))
-               goto free_link;
+               goto destroy;
 
        memset(buf, 0, sizeof(buf));
        while (read(iter_fd, buf, sizeof(buf) > 0)) {
@@ -105,11 +109,11 @@ void test_kmem_cache_iter(void)
                subtest_kmem_cache_iter_check_task_struct(skel);
        if (test__start_subtest("check_slabinfo"))
                subtest_kmem_cache_iter_check_slabinfo(skel);
+       if (test__start_subtest("open_coded_iter"))
+               subtest_kmem_cache_iter_open_coded(skel);
 
        close(iter_fd);
 
-free_link:
-       bpf_link__destroy(link);
 destroy:
        kmem_cache_iter__destroy(skel);
 }
tools/testing/selftests/bpf/progs/kmem_cache_iter.c +5 -0
index 72c9dafecd98406b..e62807caa7593604 100644
@@ -2,6 +2,8 @@
 /* Copyright (c) 2024 Google */
 
 #include "bpf_iter.h"
+#include "bpf_experimental.h"
+#include "bpf_misc.h"
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
 
@@ -30,9 +32,12 @@ struct {
 
 extern struct kmem_cache *bpf_get_kmem_cache(u64 addr) __ksym;
 
+unsigned int tgid;
+
 /* Result, will be checked by userspace */
 int task_struct_found;
 int kmem_cache_seen;
+int open_coded_seen;
 
 SEC("iter/kmem_cache")
 int slab_info_collector(struct bpf_iter__kmem_cache *ctx)
@@ -85,3 +90,26 @@ int BPF_PROG(check_task_struct)
                task_struct_found = -2;

tools/testing/selftests/bpf/progs/kmem_cache_iter.c int BPF_PROG(check_task_struct) · line 100

Quoted 10 lines
tools/testing/selftests/bpf/progs/kmem_cache_iter.c +8 -0
        return 0;
 }
+
+SEC("fentry.s/" SYS_PREFIX "sys_syncfs")
+int open_coded_iter(const void *ctx)
+{
+       struct kmem_cache *s;
+
+       if (tgid != bpf_get_current_pid_tgid() >> 32)
+               return 0;

Pls use syscall prog type and prog_run() it. No need to attach to exotic syscalls and filter by pid.

tools/testing/selftests/bpf/progs/kmem_cache_iter.c int BPF_PROG(check_task_struct) · line 112

Quoted 12 lines
tools/testing/selftests/bpf/progs/kmem_cache_iter.c +12 -0
+
+       bpf_for_each(kmem_cache, s) {
+               struct kmem_cache_result *r;
+
+               r = bpf_map_lookup_elem(&slab_result, &open_coded_seen);
+               if (!r)
+                       break;
+
+               open_coded_seen++;
+
+               if (r->obj_size != s->size)
+                       break;

The order of 'if' and ++ should probably be changed ? Otherwise the last object isn't sufficiently checked.

pw-bot: cr

#3 lore raw

Re: [PATCH v2 bpf-next 2/2] selftests/bpf: Add a test for open coded kmem_cache iter

Hello,

Quoted 139 lines · Alexei Starovoitov
Quoted 138 lines · Namhyung Kim

The new subtest is attached to sleepable fentry of syncfs() syscall. It iterates the kmem_cache using bpf_for_each loop and count the number of entries. Finally it checks it with the number of entries from the regular iterator.

  $ ./vmtest.sh -- ./test_progs -t kmem_cache_iter
  ...
  #130/1   kmem_cache_iter/check_task_struct:OK
  #130/2   kmem_cache_iter/check_slabinfo:OK
  #130/3   kmem_cache_iter/open_coded_iter:OK
  #130     kmem_cache_iter:OK
  Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED

Also simplify the code by using attach routine of the skeleton.

---
v2)
* remove unnecessary detach (Martin)
* check pid in syncfs to prevent surprise (Martin)
* remove unnecessary local variable (Andrii)

 .../testing/selftests/bpf/bpf_experimental.h  |  6 ++++
 .../bpf/prog_tests/kmem_cache_iter.c          | 28 +++++++++++--------
 .../selftests/bpf/progs/kmem_cache_iter.c     | 28 +++++++++++++++++++
 3 files changed, 50 insertions(+), 12 deletions(-)
tools/testing/selftests/bpf/bpf_experimental.h +6 -0
index b0668f29f7b394eb..cd8ecd39c3f3c68d 100644
@@ -582,4 +582,10 @@ extern int bpf_wq_set_callback_impl(struct bpf_wq *wq,
                unsigned int flags__k, void *aux__ign) __ksym;
 #define bpf_wq_set_callback(timer, cb, flags) \
        bpf_wq_set_callback_impl(timer, cb, flags, NULL)
+
+struct bpf_iter_kmem_cache;
+extern int bpf_iter_kmem_cache_new(struct bpf_iter_kmem_cache *it) __weak __ksym;
+extern struct kmem_cache *bpf_iter_kmem_cache_next(struct bpf_iter_kmem_cache *it) __weak __ksym;
+extern void bpf_iter_kmem_cache_destroy(struct bpf_iter_kmem_cache *it) __weak __ksym;
+
 #endif
tools/testing/selftests/bpf/prog_tests/kmem_cache_iter.c +16 -12
index 848d8fc9171fae45..778b55bc1f912b98 100644
@@ -68,12 +68,20 @@ static void subtest_kmem_cache_iter_check_slabinfo(struct kmem_cache_iter *skel)
        fclose(fp);
 }
 
+static void subtest_kmem_cache_iter_open_coded(struct kmem_cache_iter *skel)
+{
+       skel->bss->tgid = getpid();
+
+       /* To trigger the open coded iterator attached to the syscall */
+       syncfs(0);
+
+       /* It should be same as we've seen from the explicit iterator */
+       ASSERT_EQ(skel->bss->open_coded_seen, skel->bss->kmem_cache_seen, "open_code_seen_eq");
+}
+
 void test_kmem_cache_iter(void)
 {
-       DECLARE_LIBBPF_OPTS(bpf_iter_attach_opts, opts);
        struct kmem_cache_iter *skel = NULL;
-       union bpf_iter_link_info linfo = {};
-       struct bpf_link *link;
        char buf[256];
        int iter_fd;
 
@@ -81,16 +89,12 @@ void test_kmem_cache_iter(void)
        if (!ASSERT_OK_PTR(skel, "kmem_cache_iter__open_and_load"))
                return;
 
-       opts.link_info = &linfo;
-       opts.link_info_len = sizeof(linfo);
-
-       link = bpf_program__attach_iter(skel->progs.slab_info_collector, &opts);
-       if (!ASSERT_OK_PTR(link, "attach_iter"))
+       if (!ASSERT_OK(kmem_cache_iter__attach(skel), "skel_attach"))
                goto destroy;
 
-       iter_fd = bpf_iter_create(bpf_link__fd(link));
+       iter_fd = bpf_iter_create(bpf_link__fd(skel->links.slab_info_collector));
        if (!ASSERT_GE(iter_fd, 0, "iter_create"))
-               goto free_link;
+               goto destroy;
 
        memset(buf, 0, sizeof(buf));
        while (read(iter_fd, buf, sizeof(buf) > 0)) {
@@ -105,11 +109,11 @@ void test_kmem_cache_iter(void)
                subtest_kmem_cache_iter_check_task_struct(skel);
        if (test__start_subtest("check_slabinfo"))
                subtest_kmem_cache_iter_check_slabinfo(skel);
+       if (test__start_subtest("open_coded_iter"))
+               subtest_kmem_cache_iter_open_coded(skel);
 
        close(iter_fd);
 
-free_link:
-       bpf_link__destroy(link);
 destroy:
        kmem_cache_iter__destroy(skel);
 }
tools/testing/selftests/bpf/progs/kmem_cache_iter.c +8 -0
index 72c9dafecd98406b..e62807caa7593604 100644
@@ -2,6 +2,8 @@
 /* Copyright (c) 2024 Google */
 
 #include "bpf_iter.h"
+#include "bpf_experimental.h"
+#include "bpf_misc.h"
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
 
@@ -30,9 +32,12 @@ struct {
 
 extern struct kmem_cache *bpf_get_kmem_cache(u64 addr) __ksym;
 
+unsigned int tgid;
+
 /* Result, will be checked by userspace */
 int task_struct_found;
 int kmem_cache_seen;
+int open_coded_seen;
 
 SEC("iter/kmem_cache")
 int slab_info_collector(struct bpf_iter__kmem_cache *ctx)
@@ -85,3 +90,26 @@ int BPF_PROG(check_task_struct)
                task_struct_found = -2;
        return 0;
 }
+
+SEC("fentry.s/" SYS_PREFIX "sys_syncfs")
+int open_coded_iter(const void *ctx)
Quoted 8 lines

tools/testing/selftests/bpf/progs/kmem_cache_iter.c int BPF_PROG(check_task_struct) · line 100

Quoted 5 lines
tools/testing/selftests/bpf/progs/kmem_cache_iter.c +5 -0
+{
+       struct kmem_cache *s;
+
+       if (tgid != bpf_get_current_pid_tgid() >> 32)
+               return 0;

Pls use syscall prog type and prog_run() it. No need to attach to exotic syscalls and filter by pid.

Sure, will update in v3.

Quoted 16 lines

tools/testing/selftests/bpf/progs/kmem_cache_iter.c int BPF_PROG(check_task_struct) · line 112

Quoted 13 lines
tools/testing/selftests/bpf/progs/kmem_cache_iter.c +12 -0
+
+       bpf_for_each(kmem_cache, s) {
+               struct kmem_cache_result *r;
+
+               r = bpf_map_lookup_elem(&slab_result, &open_coded_seen);
+               if (!r)
+                       break;
+
+               open_coded_seen++;
+
+               if (r->obj_size != s->size)
+                       break;

The order of 'if' and ++ should probably be changed ? Otherwise the last object isn't sufficiently checked.

I don't think so. The last element should be an actual slab cache and then the iterator will return NULL to break the loop. I don't expect it will hit the if statement.

Thanks,
Namhyung

#4 lore raw

Re: [PATCH v2 bpf-next 2/2] selftests/bpf: Add a test for open coded kmem_cache iter

Quoted 22 lines · Namhyung Kim

Hello,

Quoted 19 lines · Alexei Starovoitov
Quoted 18 lines · Namhyung Kim

The new subtest is attached to sleepable fentry of syncfs() syscall. It iterates the kmem_cache using bpf_for_each loop and count the number of entries. Finally it checks it with the number of entries from the regular iterator.

  $ ./vmtest.sh -- ./test_progs -t kmem_cache_iter
  ...
  #130/1   kmem_cache_iter/check_task_struct:OK
  #130/2   kmem_cache_iter/check_slabinfo:OK
  #130/3   kmem_cache_iter/open_coded_iter:OK
  #130     kmem_cache_iter:OK
  Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED

Also simplify the code by using attach routine of the skeleton.

---

[SNIP]

Quoted 30 lines
Quoted 10 lines

tools/testing/selftests/bpf/progs/kmem_cache_iter.c int BPF_PROG(check_task_struct) · line 100

Quoted 7 lines
tools/testing/selftests/bpf/progs/kmem_cache_iter.c +7 -0
+SEC("fentry.s/" SYS_PREFIX "sys_syncfs")
+int open_coded_iter(const void *ctx)
+{
+       struct kmem_cache *s;
+
+       if (tgid != bpf_get_current_pid_tgid() >> 32)
+               return 0;

Pls use syscall prog type and prog_run() it. No need to attach to exotic syscalls and filter by pid.

Sure, will update in v3.

Quoted 16 lines

tools/testing/selftests/bpf/progs/kmem_cache_iter.c int BPF_PROG(check_task_struct) · line 112

Quoted 13 lines
tools/testing/selftests/bpf/progs/kmem_cache_iter.c +12 -0
+
+       bpf_for_each(kmem_cache, s) {
+               struct kmem_cache_result *r;
+
+               r = bpf_map_lookup_elem(&slab_result, &open_coded_seen);
+               if (!r)
+                       break;
+
+               open_coded_seen++;
+
+               if (r->obj_size != s->size)
+                       break;

The order of 'if' and ++ should probably be changed ? Otherwise the last object isn't sufficiently checked.

Quoted 3 lines

I don't think so. The last element should be an actual slab cache and then the iterator will return NULL to break the loop. I don't expect it will hit the if statement.

Oh, it seems you meant checking the obj_size. Ok then, I can move the increment after the check.

Thanks,
Namhyung