Skip to contentSkip to conversation

ARM: dts: add Kobo Clara 2E

PATCH Applied Andreas Kemnade 3 participants 6 messages Nov 3, 2024 – Nov 4, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v4 cover ARM: dts: add Kobo Clara 2E

Add a basic device tree for the Kobo Clara 2E Ebook reader. It is equipped with an i.MX6SLL SoC. EPDC PMIC drivers are not ready for mainline yet.

Changes in V4:
- fix order of pinmux nodes
- remove some blank lines

Changes in V3:
- removed 30MegaOhm current sense resistor nonsense

Changes in V2:
- improved commit message about devices without binding

Andreas Kemnade (3):
dt-bindings: arm: fsl: add compatible strings for Kobo Clara 2E
ARM: dts: imx: Add devicetree for Kobo Clara 2E
ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E

 .../devicetree/bindings/arm/fsl.yaml          |   8 +
 arch/arm/boot/dts/nxp/imx/Makefile            |   2 +
 .../dts/nxp/imx/imx6sll-kobo-clara2e-a.dts    |  23 +
 .../dts/nxp/imx/imx6sll-kobo-clara2e-b.dts    |  23 +
 .../nxp/imx/imx6sll-kobo-clara2e-common.dtsi  | 511 ++++++++++++++++++
 arch/arm/configs/imx_v6_v7_defconfig          |   2 +
 6 files changed, 569 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi
Signature · 1 line
2.39.5
#1 lore raw

PATCH v4 1/3 dt-bindings: arm: fsl: add compatible strings for Kobo Clara 2E

Adds compatible strings for the Kobo Clara 2E eBook reader. There are two variants differing in the EPD PMIC used.

---
 Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/arm/fsl.yaml +8 -0
index b39a7e031177e..a78903076269b 100644
@@ -620,6 +620,14 @@ properties:
               - kobo,librah2o
           - const: fsl,imx6sll
 
+      - description: i.MX6SLL Kobo Clara 2e Rev. A/B
+        items:
+          - enum:
+              - kobo,clara2e-a
+              - kobo,clara2e-b
+          - const: kobo,clara2e
+          - const: fsl,imx6sll
+
       - description: i.MX6SX based Boards
         items:
           - enum:
Signature · 1 line
2.39.5
#2 lore raw

PATCH v4 2/3 ARM: dts: imx: Add devicetree for Kobo Clara 2E

In reply to Andreas Kemnade

Adds a devicetree for the Kobo Clara 2E Ebook reader. It is based on boards marked with "37NB-E60K2M+4A2" or "37NB-E60K2M+4B0". It is equipped with an i.MX6SLL SoC.

Expected to work:
- Buttons
- Wifi
- Bluetooth
(if Wifi is initialized first, driver does not handle regulators
yet)
- LED
- uSD
- USB
- RTC
- Touchscreen

Add human-readable comments for devices without mainlined driver and binding. Such comments can e.g. be help to find testers if someone starts to work on the missing drivers.

---
 arch/arm/boot/dts/nxp/imx/Makefile            |   2 +
 .../dts/nxp/imx/imx6sll-kobo-clara2e-a.dts    |  23 +
 .../dts/nxp/imx/imx6sll-kobo-clara2e-b.dts    |  23 +
 .../nxp/imx/imx6sll-kobo-clara2e-common.dtsi  | 511 ++++++++++++++++++
 4 files changed, 559 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi
arch/arm/boot/dts/nxp/imx/Makefile +2 -0
index 92e291603ea13..58db45352b666 100644
@@ -290,6 +290,8 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
 dtb-$(CONFIG_SOC_IMX6SLL) += \
 	imx6sll-evk.dtb \
 	imx6sll-kobo-clarahd.dtb \
+	imx6sll-kobo-clara2e-a.dtb \
+	imx6sll-kobo-clara2e-b.dtb \
 	imx6sll-kobo-librah2o.dtb
 dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-nitrogen6sx.dtb \
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts new file +23 -0
new file mode 100644
index 0000000000000..33756d6de7aa0
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Clara 2E rev A ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K2M+4A2
+ * Serials start with: E60K2M (a number also seen in
+ * vendor kernel sources)
+ *
+ * Copyright 2024 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include "imx6sll-kobo-clara2e-common.dtsi"
+
+/ {
+	model = "Kobo Clara 2E";
+	compatible = "kobo,clara2e-b", "kobo,clara2e", "fsl,imx6sll";
+};
+
+&i2c2 {
+	/* EPD PMIC SY7636 at 0x62 */
+};
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts new file +23 -0
new file mode 100644
index 0000000000000..f81aeacf51420
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Clara 2E rev B ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K2M+4B0
+ * Serials start with: E60K2M (a number also seen in
+ * vendor kernel sources)
+ *
+ * Copyright 2024 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include "imx6sll-kobo-clara2e-common.dtsi"
+
+/ {
+	model = "Kobo Clara 2E";
+	compatible = "kobo,clara2e-b", "kobo,clara2e", "fsl,imx6sll";
+};
+
+&i2c2 {
+	/* EPD PMIC JD9930 at 0x18 */
+};
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi new file +511 -0

511 lines not on this page · raw message

Signature · 1 line
2.39.5
#3 lore raw

PATCH v4 3/3 ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E

In reply to Andreas Kemnade

Enable drivers used on Kobo Clara 2E

---
 arch/arm/configs/imx_v6_v7_defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/configs/imx_v6_v7_defconfig +2 -0
index 333ef55476a30..0beecdde55f58 100644
@@ -68,6 +68,7 @@ CONFIG_BT=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_NXPUART=m
 CONFIG_CFG80211=y
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=y
@@ -253,6 +254,7 @@ CONFIG_MFD_ROHM_BD71828=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_BD71815=y
+CONFIG_REGULATOR_BD71828=y
 CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_DA9062=y
 CONFIG_REGULATOR_DA9063=y
Signature · 1 line
2.39.5
Applied
#4 lore raw
In reply to Andreas Kemnade
Quoted 11 lines · Andreas Kemnade

Add a basic device tree for the Kobo Clara 2E Ebook reader. It is equipped with an i.MX6SLL SoC. EPDC PMIC drivers are not ready for mainline yet.

Changes in V4:
- fix order of pinmux nodes
- remove some blank lines

Changes in V3:
- removed 30MegaOhm current sense resistor nonsense

Quoted 7 lines

Changes in V2:
- improved commit message about devices without binding

Andreas Kemnade (3):
dt-bindings: arm: fsl: add compatible strings for Kobo Clara 2E
ARM: dts: imx: Add devicetree for Kobo Clara 2E
ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E

Applied all, thanks!

#5 lore raw
In reply to Andreas Kemnade
Quoted 30 lines · Andreas Kemnade

Add a basic device tree for the Kobo Clara 2E Ebook reader. It is equipped with an i.MX6SLL SoC. EPDC PMIC drivers are not ready for mainline yet.

Changes in V4:
- fix order of pinmux nodes
- remove some blank lines

Changes in V3:
- removed 30MegaOhm current sense resistor nonsense

Changes in V2:
- improved commit message about devices without binding

Andreas Kemnade (3):
dt-bindings: arm: fsl: add compatible strings for Kobo Clara 2E
ARM: dts: imx: Add devicetree for Kobo Clara 2E
ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E

 .../devicetree/bindings/arm/fsl.yaml          |   8 +
 arch/arm/boot/dts/nxp/imx/Makefile            |   2 +
 .../dts/nxp/imx/imx6sll-kobo-clara2e-a.dts    |  23 +
 .../dts/nxp/imx/imx6sll-kobo-clara2e-b.dts    |  23 +
 .../nxp/imx/imx6sll-kobo-clara2e-common.dtsi  | 511 ++++++++++++++++++
 arch/arm/configs/imx_v6_v7_defconfig          |   2 +
 6 files changed, 569 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi
Quoted 5 lines

--
2.39.5

My bot found new DTB warnings on the .dts files added or changed in this series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date:

  pip3 install dtschema --upgrade

New warnings running 'make CHECK_DTBS=y nxp/imx/imx6sll-kobo-clara2e-a.dtb nxp/imx/imx6sll-kobo-clara2e-b.dtb' for [email protected]:

arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dtb: spdif@2004000: compatible:0: 'fsl,imx6sl-spdif' is not one of ['fsl,imx35-spdif', 'fsl,vf610-spdif', 'fsl,imx6sx-spdif', 'fsl,imx8qm-spdif', 'fsl,imx8qxp-spdif', 'fsl,imx8mq-spdif', 'fsl,imx8mm-spdif', 'fsl,imx8mn-spdif', 'fsl,imx8ulp-spdif']
from schema $id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dtb: spdif@2004000: compatible: ['fsl,imx6sl-spdif', 'fsl,imx35-spdif'] is too long
from schema $id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dtb: spdif@2004000: compatible:0: 'fsl,imx6sl-spdif' is not one of ['fsl,imx35-spdif', 'fsl,vf610-spdif', 'fsl,imx6sx-spdif', 'fsl,imx8qm-spdif', 'fsl,imx8qxp-spdif', 'fsl,imx8mq-spdif', 'fsl,imx8mm-spdif', 'fsl,imx8mn-spdif', 'fsl,imx8ulp-spdif']
from schema $id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dtb: spdif@2004000: compatible: ['fsl,imx6sl-spdif', 'fsl,imx35-spdif'] is too long
from schema $id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dtb: /soc/bus@2000000/spba-bus@2000000/spdif@2004000: failed to match any schema with compatible: ['fsl,imx6sl-spdif', 'fsl,imx35-spdif']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dtb: /soc/bus@2000000/spba-bus@2000000/spdif@2004000: failed to match any schema with compatible: ['fsl,imx6sl-spdif', 'fsl,imx35-spdif']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dtb: serial@2034000: dma-name: b'rx\x00tx\x00' is not of type 'object', 'integer', 'array', 'boolean', 'null'
from schema $id: http://devicetree.org/schemas/dt-core.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dtb: serial@2034000: dma-name: b'rx\x00tx\x00' is not of type 'object', 'integer', 'array', 'boolean', 'null'
from schema $id: http://devicetree.org/schemas/dt-core.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dtb: /soc/bus@2000000/csi@20e8000: failed to match any schema with compatible: ['fsl,imx6sll-csi', 'fsl,imx6s-csi']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dtb: /soc/bus@2000000/csi@20e8000: failed to match any schema with compatible: ['fsl,imx6sll-csi', 'fsl,imx6s-csi']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dtb: /soc/bus@2000000/csi@20e8000: failed to match any schema with compatible: ['fsl,imx6sll-csi', 'fsl,imx6s-csi']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dtb: /soc/bus@2000000/csi@20e8000: failed to match any schema with compatible: ['fsl,imx6sll-csi', 'fsl,imx6s-csi']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dtb: lcd-controller@20f8000: compatible: 'oneOf' conditional failed, one must be fixed:

	['fsl,imx6sll-lcdif', 'fsl,imx28-lcdif'] is too long
	'fsl,imx6sll-lcdif' is not one of ['fsl,imx23-lcdif', 'fsl,imx28-lcdif', 'fsl,imx6sx-lcdif', 'fsl,imx8mp-lcdif', 'fsl,imx93-lcdif']
	'fsl,imx6sx-lcdif' was expected
	from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#

arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dtb: lcd-controller@20f8000: clocks: [[2, 129], [2, 123], [2, 0]] is too long
from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dtb: lcd-controller@20f8000: clock-names: ['pix', 'axi', 'disp_axi'] is too long
from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dtb: lcd-controller@20f8000: compatible: 'oneOf' conditional failed, one must be fixed:

	['fsl,imx6sll-lcdif', 'fsl,imx28-lcdif'] is too long
	'fsl,imx6sll-lcdif' is not one of ['fsl,imx23-lcdif', 'fsl,imx28-lcdif', 'fsl,imx6sx-lcdif', 'fsl,imx8mp-lcdif', 'fsl,imx93-lcdif']
	'fsl,imx6sx-lcdif' was expected
	from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#

arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dtb: lcd-controller@20f8000: clocks: [[2, 129], [2, 123], [2, 0]] is too long
from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dtb: lcd-controller@20f8000: clock-names: ['pix', 'axi', 'disp_axi'] is too long
from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#