Skip to contentSkip to conversation

KVM: kvm-coco-queue: Support protected TSC

PATCH In review Isaku Yamahata 6 participants 19 messages Oct 12, 2024 – Mar 14, 2025

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover KVM: kvm-coco-queue: Support protected TSC

This patch series is for the kvm-coco-queue branch. The change for TDX KVM is included at the last. The test is done by create TDX vCPU and run, get TSC offset via vCPU device attributes and compare it with the TDX TSC OFFSET metadata. Because the test requires the TDX KVM and TDX KVM kselftests, don't include it in this patch series.

Background
----------
X86 confidential computing technology defines protected guest TSC so that the VMM can't change the TSC offset/multiplier once vCPU is initialized and the guest can trust TSC. The SEV-SNP defines Secure TSC as optional. TDX mandates it. The TDX module determines the TSC offset/multiplier. The VMM has to retrieve them.

On the other hand, the x86 KVM common logic tries to guess or adjust the TSC offset/multiplier for better guest TSC and TSC interrupt latency at KVM vCPU creation (kvm_arch_vcpu_postcreate()), vCPU migration over pCPU (kvm_arch_vcpu_load()), vCPU TSC device attributes (kvm_arch_tsc_set_attr()) and guest/host writing to TSC or TSC adjust MSR (kvm_set_msr_common()).

Problem
-------
The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier. Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts are injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Originally the issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It turned out that the KVM TSC offset is different from what the TDX module determines.

Solution
--------
The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow. Possible solutions are as follows.
- Skip the logic
Ignore (or don't call related functions) the request to change the TSC offset/multiplier.
Pros
- Logically clean. This is similar to the guest_protected case. Cons
- Needs to identify the call sites.

- Revert the change at the hooks after TSC adjustment
x86 KVM defines the vendor hooks when the TSC offset/multiplier are changed. The callback can revert the change.
Pros
- We don't need to care about the logic to change the TSC offset/multiplier. Cons:
- Hacky to revert the KVM x86 common code logic.

Choose the first one. With this patch series, SEV-SNP secure TSC can be supported.

Patches:
1: Preparation for the next patch
2: Skip the logic to adjust the TSC offset/multiplier in the common x86 KVM logic

[1] https://git.kernel.org/pub/scm/utils/rt-tests/rt-tests.git

Changes for TDX KVM

arch/x86/kvm/vmx/tdx.c +8 -2
index 8785309ccb46..969da729d89f 100644
@@ -694,8 +712,6 @@ int tdx_vcpu_create(struct kvm_vcpu *vcpu)
 	vcpu->arch.cr0_guest_owned_bits = -1ul;
 	vcpu->arch.cr4_guest_owned_bits = -1ul;
 
-	vcpu->arch.tsc_offset = kvm_tdx->tsc_offset;
-	vcpu->arch.l1_tsc_offset = vcpu->arch.tsc_offset;
 	/*
 	 * TODO: support off-TD debug.  If TD DEBUG is enabled, guest state
 	 * can be accessed. guest_state_protected = false. and kvm ioctl to
@@ -706,6 +722,13 @@ int tdx_vcpu_create(struct kvm_vcpu *vcpu)
 	 */
 	vcpu->arch.guest_state_protected = true;
 
+	/* VMM can't change TSC offset/multiplier as TDX module manages them. */
+	vcpu->arch.guest_tsc_protected = true;
+	vcpu->arch.tsc_offset = kvm_tdx->tsc_offset;
+	vcpu->arch.l1_tsc_offset = vcpu->arch.tsc_offset;
+	vcpu->arch.tsc_scaling_ratio = kvm_tdx->tsc_multiplier;
+	vcpu->arch.l1_tsc_scaling_ratio = kvm_tdx->tsc_multiplier;
+
 	if ((kvm_tdx->xfam & XFEATURE_MASK_XTILE) == XFEATURE_MASK_XTILE)
 		vcpu->arch.xfd_no_write_intercept = true;
 
@@ -2674,6 +2697,7 @@ static int tdx_td_init(struct kvm *kvm, struct kvm_tdx_cmd *cmd)
 		goto out;
 
 	kvm_tdx->tsc_offset = td_tdcs_exec_read64(kvm_tdx, TD_TDCS_EXEC_TSC_OFFSET);
+	kvm_tdx->tsc_multiplier = td_tdcs_exec_read64(kvm_tdx, TD_TDCS_EXEC_TSC_MULTIPLIER);
 	kvm_tdx->attributes = td_params->attributes;
 	kvm_tdx->xfam = td_params->xfam;
 
arch/x86/kvm/vmx/tdx.h +1 -0
index 614b1c3b8483..c0e4fa61cab1 100644
@@ -42,6 +42,7 @@ struct kvm_tdx {
 	bool tsx_supported;
 
 	u64 tsc_offset;
+	u64 tsc_multiplier;
 
 	enum kvm_tdx_state state;
 
arch/x86/kvm/vmx/tdx_arch.h +1 -0
index 861c0f649b69..be4cf65c90a8 100644
@@ -69,6 +69,7 @@
 
 enum tdx_tdcs_execution_control {
 	TD_TDCS_EXEC_TSC_OFFSET = 10,
+	TD_TDCS_EXEC_TSC_MULTIPLIER = 11,
 };
 
 enum tdx_vcpu_guest_other_state {

---
Isaku Yamahata (2):
KVM: x86: Push down setting vcpu.arch.user_set_tsc
KVM: x86: Don't allow tsc_offset, tsc_scaling_ratio to change

 arch/x86/include/asm/kvm_host.h |  1 +
 arch/x86/kvm/x86.c              | 21 ++++++++++++++-------
 2 files changed, 15 insertions(+), 7 deletions(-)

base-commit: 909f9d422f59f863d7b6e4e2c6e57abb97a27d4d

Signature · 1 line
2.45.2
#1 lore raw

PATCH 1/2 KVM: x86: Push down setting vcpu.arch.user_set_tsc

Push down setting vcpu.arch.user_set_tsc to true from kvm_synchronize_tsc() to __kvm_synchronize_tsc() so that the two callers don't have to modify user_set_tsc directly as preparation.

Later, prohibit changing TSC synchronization for TDX guests to modify __kvm_synchornize_tsc() change. We don't want to touch caller sites not to change user_set_tsc.

---
 arch/x86/kvm/x86.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
arch/x86/kvm/x86.c +6 -6
index cb24e394d768..65d871bb5b35 100644
@@ -2644,12 +2644,15 @@ static inline bool kvm_check_tsc_unstable(void)
  * participates in.
  */
 static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
-				  u64 ns, bool matched)
+				  u64 ns, bool matched, bool user_set_tsc)
 {
 	struct kvm *kvm = vcpu->kvm;
 
 	lockdep_assert_held(&kvm->arch.tsc_write_lock);
 
+	if (user_set_tsc)
+		vcpu->kvm->arch.user_set_tsc = true;
+
 	/*
 	 * We also track th most recent recorded KHZ, write and time to
 	 * allow the matching interval to be extended at each write.
@@ -2735,8 +2738,6 @@ static void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
 		}
 	}
 
-	if (user_value)
-		kvm->arch.user_set_tsc = true;
 
 	/*
 	 * For a reliable TSC, we can match TSC offsets, and for an unstable
@@ -2756,7 +2757,7 @@ static void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
 		matched = true;
 	}
 
-	__kvm_synchronize_tsc(vcpu, offset, data, ns, matched);
+	__kvm_synchronize_tsc(vcpu, offset, data, ns, matched, !!user_value);
 	raw_spin_unlock_irqrestore(&kvm->arch.tsc_write_lock, flags);
 }
 
@@ -5760,8 +5761,7 @@ static int kvm_arch_tsc_set_attr(struct kvm_vcpu *vcpu,
 		tsc = kvm_scale_tsc(rdtsc(), vcpu->arch.l1_tsc_scaling_ratio) + offset;
 		ns = get_kvmclock_base_ns();
 
-		kvm->arch.user_set_tsc = true;
-		__kvm_synchronize_tsc(vcpu, offset, tsc, ns, matched);
+		__kvm_synchronize_tsc(vcpu, offset, tsc, ns, matched, true);
 		raw_spin_unlock_irqrestore(&kvm->arch.tsc_write_lock, flags);
 
 		r = 0;
Signature · 1 line
2.45.2
#2 lore raw

PATCH 2/2 KVM: x86: Don't allow tsc_offset, tsc_scaling_ratio to change

In reply to Isaku Yamahata

Add guest_tsc_protected member to struct kvm_arch_vcpu and prohibit changing TSC offset/multiplier when guest_tsc_protected is true.

Background
X86 confidential computing technology defines protected guest TSC so that the VMM can't change the TSC offset/multiplier once vCPU is initialized. The SEV-SNP defines Secure TSC as optional. TDX mandates it. The TDX module determines the TSC offset/multiplier. The VMM has to retrieve them.

On the other hand, the x86 KVM common logic tries to guess or adjust TSC offset/multiplier for better guest TSC and TSC interrupt latency at KVM vCPU creation (kvm_arch_vcpu_postcreate()), vCPU migration over pCPU (kvm_arch_vcpu_load()), vCPU TSC device attributes (kvm_arch_tsc_set_attr()) and guest/host writing to TSC or TSC adjust MSR (kvm_set_msr_common()).

Problem
The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier. Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts is injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Originally this issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It turned out that the KVM TSC offset is different from what the TDX module determines.

Solution
The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow. Possible solutions are as follows.
- Skip the logic
Ignore (or don't call related functions) the request to change the TSC offset/multiplier.
Pros
- Logically clean. This is similar to the guest_protected case. Cons
- Needs to identify the call sites.

- Revert the change at the hooks after TSC adjustment x86 KVM defines the vendor hooks when TSC offset/multiplier are changed. The callback can revert the change.
Pros
- We don't need to care about the logic to change the TSC offset/multiplier.
Cons:
- Hacky to revert the KVM x86 common code logic.

Choose the first one. With this patch series, SEV-SNP secure TSC can be supported.

[1] https://git.kernel.org/pub/scm/utils/rt-tests/rt-tests.git

---
 arch/x86/include/asm/kvm_host.h | 1 +
 arch/x86/kvm/x86.c              | 9 ++++++++-
 2 files changed, 9 insertions(+), 1 deletion(-)
arch/x86/include/asm/kvm_host.h +1 -0
index 61b7e9fe5e57..112b8a4f1860 100644
@@ -1036,6 +1036,7 @@ struct kvm_vcpu_arch {
 
 	/* Protected Guests */
 	bool guest_state_protected;
+	bool guest_tsc_protected;
 
 	/*
 	 * Set when PDPTS were loaded directly by the userspace without
arch/x86/kvm/x86.c +8 -1
index 65d871bb5b35..a6cf4422df28 100644
@@ -2587,6 +2587,9 @@ EXPORT_SYMBOL_GPL(kvm_calc_nested_tsc_multiplier);
 
 static void kvm_vcpu_write_tsc_offset(struct kvm_vcpu *vcpu, u64 l1_offset)
 {
+	if (vcpu->arch.guest_tsc_protected)
+		return;
+
 	trace_kvm_write_tsc_offset(vcpu->vcpu_id,
 				   vcpu->arch.l1_tsc_offset,
 				   l1_offset);
@@ -2650,6 +2653,9 @@ static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
 
 	lockdep_assert_held(&kvm->arch.tsc_write_lock);
 
+	if (vcpu->arch.guest_tsc_protected)
+		return;
+
 	if (user_set_tsc)
 		vcpu->kvm->arch.user_set_tsc = true;
 
@@ -5028,7 +5034,8 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 			u64 offset = kvm_compute_l1_tsc_offset(vcpu,
 						vcpu->arch.last_guest_tsc);
 			kvm_vcpu_write_tsc_offset(vcpu, offset);
-			vcpu->arch.tsc_catchup = 1;
+			if (!vcpu->arch.guest_tsc_protected)
+				vcpu->arch.tsc_catchup = 1;
 		}
 
 		if (kvm_lapic_hv_timer_in_use(vcpu))
Signature · 1 line
2.45.2
#3 lore raw

Re: [PATCH 2/2] KVM: x86: Don't allow tsc_offset, tsc_scaling_ratio to change

Quoted 35 lines · Isaku Yamahata

Problem
The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier.  Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts is injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Originally this issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead.  It turned out that the KVM TSC offset is different from what the TDX module determines.

Solution
The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow.  Possible solutions are as follows.
- Skip the logic
  Ignore (or don't call related functions) the request to change the TSC offset/multiplier.
  Pros
  - Logically clean.  This is similar to the guest_protected case. Cons
  - Needs to identify the call sites.

- Revert the change at the hooks after TSC adjustment x86 KVM defines the vendor hooks when TSC offset/multiplier are changed.  The callback can revert the change.
  Pros
  - We don't need to care about the logic to change the TSC offset/multiplier.
  Cons:
  - Hacky to revert the KVM x86 common code logic.

Quoted 6 lines

Choose the first one.  With this patch series, SEV-SNP secure TSC can be supported.

[1] https://git.kernel.org/pub/scm/utils/rt-tests/rt-tests.git

IIUC this problem was reported by Marcelo and he tested these patches and found that they did *not* resolve his issue? But offline you mentioned that you reproduced a similar seeming bug on your end that *was* resolved by these patches. If I got that right, I would think we should figure out Marcelo's problem before fixing this upstream. If it only affects out-of-tree TDX code we can take more time and not thrash the code as it gets untangled further.

#4 lore raw

Re: [PATCH 2/2] KVM: x86: Don't allow tsc_offset, tsc_scaling_ratio to change

Quoted 39 lines · Rick P
Quoted 38 lines · Isaku Yamahata

Problem
The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier.  Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts is injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Originally this issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead.  It turned out that the KVM TSC offset is different from what the TDX module determines.

Solution
The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow.  Possible solutions are as follows.
- Skip the logic
  Ignore (or don't call related functions) the request to change the TSC offset/multiplier.
  Pros
  - Logically clean.  This is similar to the guest_protected case. Cons
  - Needs to identify the call sites.

- Revert the change at the hooks after TSC adjustment x86 KVM defines the vendor hooks when TSC offset/multiplier are changed.  The callback can revert the change.
  Pros
  - We don't need to care about the logic to change the TSC offset/multiplier.
  Cons:
  - Hacky to revert the KVM x86 common code logic.

Choose the first one.  With this patch series, SEV-SNP secure TSC can be supported.

Quoted 8 lines
Quoted 3 lines

[1] https://git.kernel.org/pub/scm/utils/rt-tests/rt-tests.git

IIUC this problem was reported by Marcelo and he tested these patches and found that they did *not* resolve his issue? But offline you mentioned that you reproduced a similar seeming bug on your end that *was* resolved by these patches.

That's right. The first experimental patch didn't, but this patch does. (At least I belive so. Marcelo, please jump in if I'm wrong.)

Quoted 3 lines

If I got that right, I would think we should figure out Marcelo's problem before fixing this upstream. If it only affects out-of-tree TDX code we can take more time and not thrash the code as it gets untangled further.

Ok. This patch affects TDX code (and potentially SEV-SNP secure TSC host code.)

Signature · 1 line
Isaku Yamahata <[email protected]>
maintainer
#5 lore raw

Re: [PATCH 2/2] KVM: x86: Don't allow tsc_offset, tsc_scaling_ratio to change

In reply to Isaku Yamahata
Quoted 2 lines · Isaku Yamahata

Add guest_tsc_protected member to struct kvm_arch_vcpu and prohibit changing TSC offset/multiplier when guest_tsc_protected is true.

Thanks Isaku! To match the behavior of the SEV-SNP patches, this is also needed, which I have added to kvm-coco-queue:

arch/x86/kvm/x86.c +1 -1
index dc2f14a6d8a1..ccde7c2b2248 100644
@@ -3919,7 +3925,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_IA32_TSC:
 		if (msr_info->host_initiated) {
 			kvm_synchronize_tsc(vcpu, &data);
-		} else {
+		} else if (!vcpu->arch.guest_tsc_protected) {
 			u64 adj = kvm_compute_l1_tsc_offset(vcpu, data) - vcpu->arch.l1_tsc_offset;
 			adjust_tsc_offset_guest(vcpu, adj);
 			vcpu->arch.ia32_tsc_adjust_msr += adj;

Also, I rewrote the commit message as follows:

Add guest_tsc_protected member to struct kvm_arch_vcpu and prohibit changing TSC offset/multiplier when guest_tsc_protected is true.

X86 confidential computing technology defines protected guest TSC so that the VMM can't change the TSC offset/multiplier once vCPU is initialized. SEV-SNP defines Secure TSC as optional, whereas TDX mandates it.

KVM has common logic on x86 that tries to guess or adjust TSC offset/multiplier for better guest TSC and TSC interrupt latency at KVM vCPU creation (kvm_arch_vcpu_postcreate()), vCPU migration over pCPU (kvm_arch_vcpu_load()), vCPU TSC device attributes (kvm_arch_tsc_set_attr()) and guest/host writing to TSC or TSC adjust MSR (kvm_set_msr_common()).

The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier.
Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts is injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Originally this issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It turned out that the KVM TSC offset is different from what the TDX module determines.

Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow, thus keeping the KVM TSC offset/multiplier the same as the value of the TDX module. Writes to MSR_IA32_TSC are also blocked as they amount to a change in the TSC offset.

[1] https://git.kernel.org/pub/scm/utils/rt-tests/rt-tests.git

Paolo

Quoted 53 lines
---
  arch/x86/include/asm/kvm_host.h | 1 +
  arch/x86/kvm/x86.c              | 9 ++++++++-
  2 files changed, 9 insertions(+), 1 deletion(-)
arch/x86/include/asm/kvm_host.h +1 -0
index 61b7e9fe5e57..112b8a4f1860 100644
@@ -1036,6 +1036,7 @@ struct kvm_vcpu_arch {
 
  	/* Protected Guests */
  	bool guest_state_protected;
+	bool guest_tsc_protected;
 
  	/*
  	 * Set when PDPTS were loaded directly by the userspace without
arch/x86/kvm/x86.c +8 -1
index 65d871bb5b35..a6cf4422df28 100644
@@ -2587,6 +2587,9 @@ EXPORT_SYMBOL_GPL(kvm_calc_nested_tsc_multiplier);
 
  static void kvm_vcpu_write_tsc_offset(struct kvm_vcpu *vcpu, u64 l1_offset)
  {
+	if (vcpu->arch.guest_tsc_protected)
+		return;
+
  	trace_kvm_write_tsc_offset(vcpu->vcpu_id,
  				   vcpu->arch.l1_tsc_offset,
  				   l1_offset);
@@ -2650,6 +2653,9 @@ static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
 
  	lockdep_assert_held(&kvm->arch.tsc_write_lock);
 
+	if (vcpu->arch.guest_tsc_protected)
+		return;
+
  	if (user_set_tsc)
  		vcpu->kvm->arch.user_set_tsc = true;
 
@@ -5028,7 +5034,8 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
  			u64 offset = kvm_compute_l1_tsc_offset(vcpu,
  						vcpu->arch.last_guest_tsc);
  			kvm_vcpu_write_tsc_offset(vcpu, offset);
-			vcpu->arch.tsc_catchup = 1;
+			if (!vcpu->arch.guest_tsc_protected)
+				vcpu->arch.tsc_catchup = 1;
  		}
 
  		if (kvm_lapic_hv_timer_in_use(vcpu))
#6 lore raw

Re: [PATCH 2/2] KVM: x86: Don't allow tsc_offset, tsc_scaling_ratio to change

Quoted 12 lines · Paolo Bonzini
Quoted 2 lines · Isaku Yamahata

Add guest_tsc_protected member to struct kvm_arch_vcpu and prohibit changing TSC offset/multiplier when guest_tsc_protected is true.

Thanks Isaku! To match the behavior of the SEV-SNP patches, this is also needed, which I have added to kvm-coco-queue:

arch/x86/kvm/x86.c +0 -0
index dc2f14a6d8a1..ccde7c2b2248 100644

arch/x86/kvm/x86.c int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) · line 3931

Quoted 8 lines
arch/x86/kvm/x86.c +1 -1
@@ -3919,7 +3925,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_IA32_TSC:
 		if (msr_info->host_initiated) {
 			kvm_synchronize_tsc(vcpu, &data);
-		} else {
+		} else if (!vcpu->arch.guest_tsc_protected) {
 			u64 adj = kvm_compute_l1_tsc_offset(vcpu, data) - vcpu->arch.l1_tsc_offset;
 			adjust_tsc_offset_guest(vcpu, adj);
 			vcpu->arch.ia32_tsc_adjust_msr += adj;

Thank you for catching this. This looks good.

Signature · 1 line
Isaku Yamahata <[email protected]>
#7 lore raw
In reply to Isaku Yamahata

Hi Isaku,

Quoted 28 lines · Isaku Yamahata

This patch series is for the kvm-coco-queue branch. The change for TDX KVM is included at the last. The test is done by create TDX vCPU and run, get TSC offset via vCPU device attributes and compare it with the TDX TSC OFFSET metadata. Because the test requires the TDX KVM and TDX KVM kselftests, don't include it in this patch series.

Background
----------
X86 confidential computing technology defines protected guest TSC so that the VMM can't change the TSC offset/multiplier once vCPU is initialized and the guest can trust TSC. The SEV-SNP defines Secure TSC as optional. TDX mandates it. The TDX module determines the TSC offset/multiplier. The VMM has to retrieve them.

On the other hand, the x86 KVM common logic tries to guess or adjust the TSC offset/multiplier for better guest TSC and TSC interrupt latency at KVM vCPU creation (kvm_arch_vcpu_postcreate()), vCPU migration over pCPU (kvm_arch_vcpu_load()), vCPU TSC device attributes (kvm_arch_tsc_set_attr()) and guest/host writing to TSC or TSC adjust MSR (kvm_set_msr_common()).

Problem
-------
The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier. Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Quoted 8 lines

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts are injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Originally the issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It turned out that the KVM TSC offset is different from what the TDX module determines.

Can you provide what is the exact command line to reproduce this problem ? Any links to this reported issue ?

Quoted 22 lines

Solution
--------
The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow. Possible solutions are as follows.
- Skip the logic
Ignore (or don't call related functions) the request to change the TSC offset/multiplier.
Pros
- Logically clean. This is similar to the guest_protected case. Cons
- Needs to identify the call sites.

- Revert the change at the hooks after TSC adjustment
x86 KVM defines the vendor hooks when the TSC offset/multiplier are changed. The callback can revert the change.
Pros
- We don't need to care about the logic to change the TSC offset/multiplier. Cons:
- Hacky to revert the KVM x86 common code logic.

Quoted 2 lines

Choose the first one. With this patch series, SEV-SNP secure TSC can be supported.

I am not sure how will this help SNP Secure TSC, as the GUEST_TSC_OFFSET and GUEST_TSC_SCALE are only available to the guest.

Regards,
Nikunj

#8 lore raw
Quoted 36 lines · Nikunj A. Dadhania

Hi Isaku,

Quoted 33 lines · Isaku Yamahata

This patch series is for the kvm-coco-queue branch. The change for TDX KVM is included at the last. The test is done by create TDX vCPU and run, get TSC offset via vCPU device attributes and compare it with the TDX TSC OFFSET metadata. Because the test requires the TDX KVM and TDX KVM kselftests, don't include it in this patch series.

Background
----------
X86 confidential computing technology defines protected guest TSC so that the VMM can't change the TSC offset/multiplier once vCPU is initialized and the guest can trust TSC. The SEV-SNP defines Secure TSC as optional. TDX mandates it. The TDX module determines the TSC offset/multiplier. The VMM has to retrieve them.

On the other hand, the x86 KVM common logic tries to guess or adjust the TSC offset/multiplier for better guest TSC and TSC interrupt latency at KVM vCPU creation (kvm_arch_vcpu_postcreate()), vCPU migration over pCPU (kvm_arch_vcpu_load()), vCPU TSC device attributes (kvm_arch_tsc_set_attr()) and guest/host writing to TSC or TSC adjust MSR (kvm_set_msr_common()).

Problem
-------
The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier. Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts are injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Quoted 5 lines
Quoted 3 lines

Originally the issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It turned out that the KVM TSC offset is different from what the TDX module determines.

Can you provide what is the exact command line to reproduce this problem ?

Nikunj,

Run cyclictest, on an isolated CPU, in a VM. For the maximum latency metric, rather than 50us, one gets 500us at times.

Quoted 1 line

Any links to this reported issue ?

This was not posted publically. But its not hard to reproduce.

Quoted 20 lines
Quoted 20 lines

Solution
--------
The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow. Possible solutions are as follows.
- Skip the logic
Ignore (or don't call related functions) the request to change the TSC offset/multiplier.
Pros
- Logically clean. This is similar to the guest_protected case. Cons
- Needs to identify the call sites.

- Revert the change at the hooks after TSC adjustment
x86 KVM defines the vendor hooks when the TSC offset/multiplier are changed. The callback can revert the change.
Pros
- We don't need to care about the logic to change the TSC offset/multiplier. Cons:
- Hacky to revert the KVM x86 common code logic.

Quoted 5 lines
Quoted 2 lines

Choose the first one. With this patch series, SEV-SNP secure TSC can be supported.

I am not sure how will this help SNP Secure TSC, as the GUEST_TSC_OFFSET and GUEST_TSC_SCALE are only available to the guest.

Nikunj,

FYI:

SEV-SNP processors (at least the one below) do not seem affected by this problem.

At least this one:

vendor_id : AuthenticAMD
cpu family : 25
model : 17
model name : AMD EPYC 9124 16-Core Processor

#9 lore raw
Quoted 75 lines · Marcelo Tosatti
Quoted 36 lines · Nikunj A. Dadhania

Hi Isaku,

Quoted 33 lines · Isaku Yamahata

This patch series is for the kvm-coco-queue branch. The change for TDX KVM is included at the last. The test is done by create TDX vCPU and run, get TSC offset via vCPU device attributes and compare it with the TDX TSC OFFSET metadata. Because the test requires the TDX KVM and TDX KVM kselftests, don't include it in this patch series.

Background
----------
X86 confidential computing technology defines protected guest TSC so that the VMM can't change the TSC offset/multiplier once vCPU is initialized and the guest can trust TSC. The SEV-SNP defines Secure TSC as optional. TDX mandates it. The TDX module determines the TSC offset/multiplier. The VMM has to retrieve them.

On the other hand, the x86 KVM common logic tries to guess or adjust the TSC offset/multiplier for better guest TSC and TSC interrupt latency at KVM vCPU creation (kvm_arch_vcpu_postcreate()), vCPU migration over pCPU (kvm_arch_vcpu_load()), vCPU TSC device attributes (kvm_arch_tsc_set_attr()) and guest/host writing to TSC or TSC adjust MSR (kvm_set_msr_common()).

Problem
-------
The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier. Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts are injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Quoted 5 lines
Quoted 3 lines

Originally the issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It turned out that the KVM TSC offset is different from what the TDX module determines.

Can you provide what is the exact command line to reproduce this problem ?

Nikunj,

Run cyclictest, on an isolated CPU, in a VM. For the maximum latency metric, rather than 50us, one gets 500us at times.

Quoted 1 line

Any links to this reported issue ?

This was not posted publically. But its not hard to reproduce.

Quoted 23 lines
Quoted 22 lines

Solution
--------
The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow. Possible solutions are as follows.
- Skip the logic
Ignore (or don't call related functions) the request to change the TSC offset/multiplier.
Pros
- Logically clean. This is similar to the guest_protected case. Cons
- Needs to identify the call sites.

- Revert the change at the hooks after TSC adjustment
x86 KVM defines the vendor hooks when the TSC offset/multiplier are changed. The callback can revert the change.
Pros
- We don't need to care about the logic to change the TSC offset/multiplier. Cons:
- Hacky to revert the KVM x86 common code logic.

Choose the first one. With this patch series, SEV-SNP secure TSC can be supported.

Quoted 8 lines
Quoted 2 lines

I am not sure how will this help SNP Secure TSC, as the GUEST_TSC_OFFSET and GUEST_TSC_SCALE are only available to the guest.

Nikunj,

FYI:

SEV-SNP processors (at least the one below) do not seem affected by this problem.

Did you apply Secure TSC patches of (guest kernel, KVM and QEMU) manualy? because none of them are merged. Otherwise, I think SNP guest is still using KVM emulated TSC.

Quoted 8 lines

At least this one:

vendor_id : AuthenticAMD
cpu family : 25
model : 17
model name : AMD EPYC 9124 16-Core Processor

#10 lore raw
Quoted 79 lines · Xiaoyao Li
Quoted 78 lines · Marcelo Tosatti
Quoted 36 lines · Nikunj A. Dadhania

Hi Isaku,

Quoted 33 lines · Isaku Yamahata

This patch series is for the kvm-coco-queue branch. The change for TDX KVM is included at the last. The test is done by create TDX vCPU and run, get TSC offset via vCPU device attributes and compare it with the TDX TSC OFFSET metadata. Because the test requires the TDX KVM and TDX KVM kselftests, don't include it in this patch series.

Background
----------
X86 confidential computing technology defines protected guest TSC so that the VMM can't change the TSC offset/multiplier once vCPU is initialized and the guest can trust TSC. The SEV-SNP defines Secure TSC as optional. TDX mandates it. The TDX module determines the TSC offset/multiplier. The VMM has to retrieve them.

On the other hand, the x86 KVM common logic tries to guess or adjust the TSC offset/multiplier for better guest TSC and TSC interrupt latency at KVM vCPU creation (kvm_arch_vcpu_postcreate()), vCPU migration over pCPU (kvm_arch_vcpu_load()), vCPU TSC device attributes (kvm_arch_tsc_set_attr()) and guest/host writing to TSC or TSC adjust MSR (kvm_set_msr_common()).

Problem
-------
The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier. Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts are injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Quoted 5 lines
Quoted 3 lines

Originally the issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It turned out that the KVM TSC offset is different from what the TDX module determines.

Can you provide what is the exact command line to reproduce this problem ?

Nikunj,

Run cyclictest, on an isolated CPU, in a VM. For the maximum latency metric, rather than 50us, one gets 500us at times.

Quoted 1 line

Any links to this reported issue ?

This was not posted publically. But its not hard to reproduce.

Quoted 25 lines
Quoted 20 lines

Solution
--------
The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow. Possible solutions are as follows.
- Skip the logic
Ignore (or don't call related functions) the request to change the TSC offset/multiplier.
Pros
- Logically clean. This is similar to the guest_protected case. Cons
- Needs to identify the call sites.

- Revert the change at the hooks after TSC adjustment
x86 KVM defines the vendor hooks when the TSC offset/multiplier are changed. The callback can revert the change.
Pros
- We don't need to care about the logic to change the TSC offset/multiplier. Cons:
- Hacky to revert the KVM x86 common code logic.

Quoted 2 lines

Choose the first one. With this patch series, SEV-SNP secure TSC can be supported.

I am not sure how will this help SNP Secure TSC, as the GUEST_TSC_OFFSET and GUEST_TSC_SCALE are only available to the guest.

Quoted 8 lines
Quoted 5 lines

Nikunj,

FYI:

SEV-SNP processors (at least the one below) do not seem affected by this problem.

Did you apply Secure TSC patches of (guest kernel, KVM and QEMU) manualy? because none of them are merged.

Yes. cyclictest latency, on a system configured with tuned realtime-virtual-host/realtime-virtual-guest tuned profiles, goes from 30us to 50us.

Quoted 2 lines

Otherwise, I think SNP guest is still using
KVM emulated TSC.

Not in the case the test was made.

#11 lore raw

Hello Marcelo

Quoted 16 lines · Marcelo Tosatti
Quoted 15 lines · Xiaoyao Li
Quoted 14 lines · Marcelo Tosatti
Quoted 8 lines · Nikunj A. Dadhania

Hi Isaku,

Quoted 2 lines · Isaku Yamahata

Choose the first one. With this patch series, SEV-SNP secure TSC can be supported.

I am not sure how will this help SNP Secure TSC, as the GUEST_TSC_OFFSET and GUEST_TSC_SCALE are only available to the guest.

Nikunj,

FYI:

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

SEV-SNP processors (at least the one below) do not seem affected by this problem.

Did you apply Secure TSC patches of (guest kernel, KVM and QEMU) manualy? because none of them are merged.

Yes. cyclictest latency, on a system configured with tuned realtime-virtual-host/realtime-virtual-guest tuned profiles, goes from 30us to 50us.

Would you be ok if I include your Tested-by in the next version of my Secure TSC patches?

https://lore.kernel.org/lkml/[email protected]/

Quoted 5 lines
Quoted 2 lines

Otherwise, I think SNP guest is still using
KVM emulated TSC.

Not in the case the test was made.

Regards,
Nikunj

#12 lore raw
Quoted 24 lines · Nikunj A. Dadhania

Hello Marcelo

Quoted 21 lines · Marcelo Tosatti
Quoted 19 lines · Xiaoyao Li
Quoted 7 lines · Marcelo Tosatti
Quoted 6 lines · Nikunj A. Dadhania

Hi Isaku,

Quoted 2 lines · Isaku Yamahata

Choose the first one. With this patch series, SEV-SNP secure TSC can be supported.

Quoted 8 lines
Quoted 2 lines

I am not sure how will this help SNP Secure TSC, as the GUEST_TSC_OFFSET and GUEST_TSC_SCALE are only available to the guest.

Nikunj,

FYI:

SEV-SNP processors (at least the one below) do not seem affected by this problem.

Did you apply Secure TSC patches of (guest kernel, KVM and QEMU) manualy? because none of them are merged.

Quoted 7 lines
Quoted 3 lines

Yes. cyclictest latency, on a system configured with tuned realtime-virtual-host/realtime-virtual-guest tuned profiles, goes from 30us to 50us.

Would you be ok if I include your Tested-by in the next version of my Secure TSC patches?

https://lore.kernel.org/lkml/[email protected]/

Please don't, haven't tested specifically the patches above.

Quoted 10 lines
Quoted 5 lines
Quoted 2 lines

Otherwise, I think SNP guest is still using
KVM emulated TSC.

Not in the case the test was made.

Regards,
Nikunj

#13 lore raw
In reply to Marcelo Tosatti

Hi Marcelo,

Quoted 18 lines · Marcelo Tosatti
Quoted 17 lines · Nikunj A. Dadhania
Quoted 14 lines · Isaku Yamahata

Problem
-------
The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier. Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts are injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Originally the issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It turned out that the KVM TSC offset is different from what the TDX module determines.

Quoted 6 lines
Quoted 1 line

Can you provide what is the exact command line to reproduce this problem ?

Nikunj,

Run cyclictest, on an isolated CPU, in a VM. For the maximum latency metric, rather than 50us, one gets 500us at times.

I tried out the cyclictest after referring to the documentation[1]. Here are the results of the run on an isolated CPU in the Secure TSC-enabled SEV-SNP VM (CPUs 16-31 are isolated in the VM):

$ sudo taskset -c 16-31 ./cyclictest --mlockall --priority=80 --interval=200 --distance=0 -q -D 5m
T: 0 ( 1226) P:80 I:200 C:1500000 Min:      6 Act:   10 Avg:   16 Max:     150
$

VM detail: 32 vCPUs VM, guest kernel v6.12-rc3 compiled with CONFIG_PREEMPT_RT=y

Quoted 4 lines

FYI:

SEV-SNP processors (at least the one below) do not seem affected by this problem.

Thanks for testing on SEV-SNP.

Regards,
Nikunj

1. https://wiki.linuxfoundation.org/realtime/documentation/howto/tools/cyclictest/start

#14 lore raw
In reply to Nikunj A. Dadhania
Quoted 20 lines · Nikunj A. Dadhania
Quoted 20 lines

Solution
--------
The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow. Possible solutions are as follows.
- Skip the logic
Ignore (or don't call related functions) the request to change the TSC offset/multiplier.
Pros
- Logically clean. This is similar to the guest_protected case. Cons
- Needs to identify the call sites.

- Revert the change at the hooks after TSC adjustment
x86 KVM defines the vendor hooks when the TSC offset/multiplier are changed. The callback can revert the change.
Pros
- We don't need to care about the logic to change the TSC offset/multiplier. Cons:
- Hacky to revert the KVM x86 common code logic.

Quoted 5 lines
Quoted 2 lines

Choose the first one. With this patch series, SEV-SNP secure TSC can be supported.

I am not sure how will this help SNP Secure TSC, as the GUEST_TSC_OFFSET and GUEST_TSC_SCALE are only available to the guest.

Although Xiaoyao mentioned KVM emulated timer, let me clarify it. I think the following is common for SEV-SNP and TDX.

The issue is with guest MSR_IA32_TSC_DEADLINE (and guest local APIC Timer Initial Count Register). As long as I understand according to the public documentation, the SEV-SNP hardware (or the TDX module) doesn't virtualize it so that the VMM (KVM) has to emulate it.
The KVM uses the host timer(vcpu->arch.apic.lapic_timer) and inject timer interrupt withit. KVM tracks TSC multiplier/offset to calculate the host TSC timeout value based on them.

The KVM multiplier and offset must match with the values the hardware (or the TDX module) thinks. If they don't match, the KVM tsc deadline timer (or local APIC timer) emulation is inaccurate. Timer interrupt is injected Late or early.

KVM has several points to change tsc multiplier/offset from the original value. This patch series is to prevent KVM from modifying TSC multipler/offset.

In reality, it's difficult to notice that the timer interrupt is injected late or early like several miliseconds due to vCPU scheduling. The injecting timer interrupt always late harms time sensitive workload (e.g. heart beat) in guest as Marcelo noticed.

Thanks,

Signature · 1 line
Isaku Yamahata <[email protected]>
#15 lore raw
In reply to Isaku Yamahata
Quoted 5 lines · Isaku Yamahata

This patch series is for the kvm-coco-queue branch. The change for TDX KVM is included at the last. The test is done by create TDX vCPU and run, get TSC offset via vCPU device attributes and compare it with the TDX TSC OFFSET metadata. Because the test requires the TDX KVM and TDX KVM kselftests, don't include it in this patch series.

OK, previous results were incorrect. In fact, this patches (which apply cleanly to current kvm-coco-queue) reduce cyclictest latency from:

Max Latencies: 00167 00160
Max Latencies: 00132 00151
Max Latencies: 00138 00142
Max Latencies: 02512 02582
Max Latencies: 00139 00140
Max Latencies: 00128 00131
Max Latencies: 00131 00132
Max Latencies: 00131 00134
Max Latencies: 00136 00147
Max Latencies: 00153 00135
Max Latencies: 00138 00138

to:

Max Latencies: 00134 00131
Max Latencies: 00130 00129
Max Latencies: 00126 00141
Max Latencies: 00137 00138
Max Latencies: 00123 00115
Max Latencies: 00119 00127
Max Latencies: 00131 00104
Max Latencies: 00137 00127
Max Latencies: 00135 00126
Max Latencies: 00128 00142
Max Latencies: 00135 00138

Quoted 140 lines

Background
----------
X86 confidential computing technology defines protected guest TSC so that the VMM can't change the TSC offset/multiplier once vCPU is initialized and the guest can trust TSC. The SEV-SNP defines Secure TSC as optional. TDX mandates it. The TDX module determines the TSC offset/multiplier. The VMM has to retrieve them.

On the other hand, the x86 KVM common logic tries to guess or adjust the TSC offset/multiplier for better guest TSC and TSC interrupt latency at KVM vCPU creation (kvm_arch_vcpu_postcreate()), vCPU migration over pCPU (kvm_arch_vcpu_load()), vCPU TSC device attributes (kvm_arch_tsc_set_attr()) and guest/host writing to TSC or TSC adjust MSR (kvm_set_msr_common()).

Problem
-------
The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier. Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts are injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Originally the issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It turned out that the KVM TSC offset is different from what the TDX module determines.

Solution
--------
The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow. Possible solutions are as follows.
- Skip the logic
Ignore (or don't call related functions) the request to change the TSC offset/multiplier.
Pros
- Logically clean. This is similar to the guest_protected case. Cons
- Needs to identify the call sites.

- Revert the change at the hooks after TSC adjustment
x86 KVM defines the vendor hooks when the TSC offset/multiplier are changed. The callback can revert the change.
Pros
- We don't need to care about the logic to change the TSC offset/multiplier. Cons:
- Hacky to revert the KVM x86 common code logic.

Choose the first one. With this patch series, SEV-SNP secure TSC can be supported.

Patches:
1: Preparation for the next patch
2: Skip the logic to adjust the TSC offset/multiplier in the common x86 KVM logic

[1] https://git.kernel.org/pub/scm/utils/rt-tests/rt-tests.git

Changes for TDX KVM

arch/x86/kvm/vmx/tdx.c +8 -2
index 8785309ccb46..969da729d89f 100644
@@ -694,8 +712,6 @@ int tdx_vcpu_create(struct kvm_vcpu *vcpu)
 	vcpu->arch.cr0_guest_owned_bits = -1ul;
 	vcpu->arch.cr4_guest_owned_bits = -1ul;
 
-	vcpu->arch.tsc_offset = kvm_tdx->tsc_offset;
-	vcpu->arch.l1_tsc_offset = vcpu->arch.tsc_offset;
 	/*
 	 * TODO: support off-TD debug.  If TD DEBUG is enabled, guest state
 	 * can be accessed. guest_state_protected = false. and kvm ioctl to
@@ -706,6 +722,13 @@ int tdx_vcpu_create(struct kvm_vcpu *vcpu)
 	 */
 	vcpu->arch.guest_state_protected = true;
 
+	/* VMM can't change TSC offset/multiplier as TDX module manages them. */
+	vcpu->arch.guest_tsc_protected = true;
+	vcpu->arch.tsc_offset = kvm_tdx->tsc_offset;
+	vcpu->arch.l1_tsc_offset = vcpu->arch.tsc_offset;
+	vcpu->arch.tsc_scaling_ratio = kvm_tdx->tsc_multiplier;
+	vcpu->arch.l1_tsc_scaling_ratio = kvm_tdx->tsc_multiplier;
+
 	if ((kvm_tdx->xfam & XFEATURE_MASK_XTILE) == XFEATURE_MASK_XTILE)
 		vcpu->arch.xfd_no_write_intercept = true;
 
@@ -2674,6 +2697,7 @@ static int tdx_td_init(struct kvm *kvm, struct kvm_tdx_cmd *cmd)
 		goto out;
 
 	kvm_tdx->tsc_offset = td_tdcs_exec_read64(kvm_tdx, TD_TDCS_EXEC_TSC_OFFSET);
+	kvm_tdx->tsc_multiplier = td_tdcs_exec_read64(kvm_tdx, TD_TDCS_EXEC_TSC_MULTIPLIER);
 	kvm_tdx->attributes = td_params->attributes;
 	kvm_tdx->xfam = td_params->xfam;
 
arch/x86/kvm/vmx/tdx.h +1 -0
index 614b1c3b8483..c0e4fa61cab1 100644
@@ -42,6 +42,7 @@ struct kvm_tdx {
 	bool tsx_supported;
 
 	u64 tsc_offset;
+	u64 tsc_multiplier;
 
 	enum kvm_tdx_state state;
 
arch/x86/kvm/vmx/tdx_arch.h +1 -1
index 861c0f649b69..be4cf65c90a8 100644
@@ -69,6 +69,7 @@
 
 enum tdx_tdcs_execution_control {
 	TD_TDCS_EXEC_TSC_OFFSET = 10,
+	TD_TDCS_EXEC_TSC_MULTIPLIER = 11,
 };
 
 enum tdx_vcpu_guest_other_state {
 
---

Isaku Yamahata (2):
KVM: x86: Push down setting vcpu.arch.user_set_tsc
KVM: x86: Don't allow tsc_offset, tsc_scaling_ratio to change

 arch/x86/include/asm/kvm_host.h |  1 +
 arch/x86/kvm/x86.c              | 21 ++++++++++++++-------
 2 files changed, 15 insertions(+), 7 deletions(-)

base-commit: 909f9d422f59f863d7b6e4e2c6e57abb97a27d4d

Signature · 1 line
2.45.2
#16 lore raw
Quoted 9 lines · Marcelo Tosatti
Quoted 5 lines · Isaku Yamahata

This patch series is for the kvm-coco-queue branch. The change for TDX KVM is included at the last. The test is done by create TDX vCPU and run, get TSC offset via vCPU device attributes and compare it with the TDX TSC OFFSET metadata. Because the test requires the TDX KVM and TDX KVM kselftests, don't include it in this patch series.

OK, previous results were incorrect. In fact, this patches (which apply cleanly to current kvm-coco-queue) reduce cyclictest latency from:

Thank you for evaluating it. Does your guest include [1] (or similar fix)? The patch would affect the result much.

[1] https://lore.kernel.org/lkml/[email protected]/

Signature · 1 line
Isaku Yamahata <[email protected]>
maintainer
#17 lore raw
In reply to Isaku Yamahata
Quoted 13 lines · Isaku Yamahata

The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier. Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts are injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Originally the issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It turned out that the KVM TSC offset is different from what the TDX module determines.

Quoted 5 lines

The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow. [...] Ignore (or don't call related functions) the request to change the TSC offset/multiplier.

[...] With this patch series, SEV-SNP secure TSC can be supported.

Thanks, I've squashed these changes (apart from setting vcpu->arch.guest_tsc_protected) into the corresponding patches in kvm-coco-queue. Just one small change is needed in patch 2, to which I will reply.

For SEV-SNP, all that's necessary on top should be

arch/x86/kvm/svm/sev.c +3 -0
index d92e97baea0f..beddeed90ff0 100644
@@ -2481,6 +2481,9 @@ static int snp_launch_update_vmsa(struct kvm *kvm, struct kvm_sev_cmd *argp)
 		}
 
 		svm->vcpu.arch.guest_state_protected = true;
+		if (snp_secure_tsc_enabled(kvm))
+			svm->vcpu.arch.guest_tsc_protected = true;
+
 		/*
 		 * SEV-ES (and thus SNP) guest mandates LBR Virtualization to
 		 * be _always_ ON. Enable it only after setting

For the sake of testing, I applied the latest SEV-SNP host patches from https://github.com/AMDESE/linux-kvm/commits/sectsc-host-latest
to kvm-coco-queue as well, plus the above hunk; Nikunj can integrate it in the next revision of
https://lore.kernel.org/kvm/[email protected]/T/.

Paolo

#18 lore raw
Quoted 42 lines · Paolo Bonzini
Quoted 13 lines · Isaku Yamahata

The current x86 KVM implementation conflicts with protected TSC because the VMM can't change the TSC offset/multiplier.  Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier somehow.

Because KVM emulates the TSC timer or the TSC deadline timer with the TSC offset/multiplier, the TSC timer interrupts are injected to the guest at the wrong time if the KVM TSC offset is different from what the TDX module determined.

Originally the issue was found by cyclic test of rt-test [1] as the latency in TDX case is worse than VMX value + TDX SEAMCALL overhead.  It turned out that the KVM TSC offset is different from what the TDX module determines.

Quoted 5 lines

The solution is to keep the KVM TSC offset/multiplier the same as the value of the TDX module somehow. [...] Ignore (or don't call related functions) the request to change the TSC offset/multiplier.

[...]  With this patch series, SEV-SNP secure TSC can be supported.

Thanks, I've squashed these changes (apart from setting vcpu->arch.guest_tsc_protected) into the corresponding patches in kvm-coco-queue.  Just one small change is needed in patch 2, to which I will reply.

For SEV-SNP, all that's necessary on top should be

arch/x86/kvm/svm/sev.c +0 -0
index d92e97baea0f..beddeed90ff0 100644
@@ -2481,6 +2481,9 @@ static int snp_launch_update_vmsa(struct kvm *kvm, struct kvm_sev_cmd *argp)
          }


         svm->vcpu.arch.guest_state_protected = true;
+        if (snp_secure_tsc_enabled(kvm))
+            svm->vcpu.arch.guest_tsc_protected = true;
+
         /*
          * SEV-ES (and thus SNP) guest mandates LBR Virtualization to
          * be _always_ ON. Enable it only after setting

Quoted 5 lines

For the sake of testing, I applied the latest SEV-SNP host patches from https://github.com/AMDESE/linux-kvm/commits/sectsc-host-latest
to kvm-coco-queue as well, plus the above hunk; Nikunj can integrate it in the next revision of
https://lore.kernel.org/kvm/[email protected]/T/.

Sure Paolo, I will add the above changes in my next revision. Should I rebase the Secure TSC host patches on top of kvm-coco-queue ?

Regards
Nikunj