MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to Ryan
RFC 1/1 MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to Ryan
Remove Brendan Higgins <[email protected]> from i2c-aspeed entry and replace with Ryan Chen <[email protected]>.
---
I am leaving Google and am going through and cleaning up my @google.com address in the relevant places. I was just going to remove myself from the ASPEED I2C DRIVER since I haven't been paying attention to it, but then I saw Ryan is adding a file for the I2C functions on 2600, which made my think: Should I replace myself with Ryan as the maintainer?
I see that I am the only person actually listed as the maintainer at the moment, and I don't want to leave this in an unmaintained state. What does everyone think? Are we cool with Ryan as the new maintainer?
--- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
MAINTAINERS +1 -1
@@ -2195,7 +2195,7 @@ F: drivers/mmc/host/usdhi6rol0.c F: drivers/pinctrl/pinctrl-artpec* ARM/ASPEED I2C DRIVER -M: Brendan Higgins <[email protected]> +M: Ryan Chen <[email protected]> R: Benjamin Herrenschmidt <[email protected]> R: Joel Stanley <[email protected]> L: [email protected]
base-commit: cfaaa7d010d1fc58f9717fcc8591201e741d2d49
Signature · 1 line
2.47.0.338.g60cca15819-goog
Quoted 6 lines · Brendan Higgins
Remove Brendan Higgins <[email protected]> from i2c-aspeed entry and replace with Ryan Chen <[email protected]>.
Signed-off-by Brendan Higgins <[email protected]>---
I am leaving Google and am going through and cleaning up my @google.com
Thanks for your work on this driver.
Quoted 8 lines
address in the relevant places. I was just going to remove myself from the ASPEED I2C DRIVER since I haven't been paying attention to it, but then I saw Ryan is adding a file for the I2C functions on 2600, which made my think: Should I replace myself with Ryan as the maintainer?
I see that I am the only person actually listed as the maintainer at the moment, and I don't want to leave this in an unmaintained state. What does everyone think? Are we cool with Ryan as the new maintainer?
I am fine, depends on Ryan as far as I am concerned.
Quoted 16 lines · Wolfram Sang
Quoted 6 lines · Brendan Higgins
Remove Brendan Higgins <[email protected]> from i2c-aspeed entry and replace with Ryan Chen <[email protected]>.
Signed-off-by Brendan Higgins <[email protected]>---
I am leaving Google and am going through and cleaning up my @google.comThanks for your work on this driver.
Quoted 5 lines
address in the relevant places. I was just going to remove myself from the ASPEED I2C DRIVER since I haven't been paying attention to it, but then I saw Ryan is adding a file for the I2C functions on 2600, which made my think: Should I replace myself with Ryan as the maintainer?
Quoted 5 lines
Quoted 3 lines
I see that I am the only person actually listed as the maintainer at the moment, and I don't want to leave this in an unmaintained state. What does everyone think? Are we cool with Ryan as the new maintainer?
I am fine, depends on Ryan as far as I am concerned.
One thing I forgot to note in my previous email: today - Friday, November 15th is my last day at Google, so after today I won't have access to this account. If future replies or patch updates are needed, they will come from my [email protected] account.
Quoted 19 lines
Subject: Re: [RFC v1]
MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to RyanQuoted 7 lines · Brendan Higgins
Remove Brendan Higgins <[email protected]> from i2c-aspeed entry and replace with Ryan Chen <[email protected]>.
Signed-off-by Brendan Higgins <[email protected]>---
I am leaving Google and am going through and cleaning up my @google.comThanks for your work on this driver.
Quoted 5 lines
address in the relevant places. I was just going to remove myself from the ASPEED I2C DRIVER since I haven't been paying attention to it, but then I saw Ryan is adding a file for the I2C functions on 2600, which made my think: Should I replace myself with Ryan as the maintainer?
Quoted 5 lines
Quoted 3 lines
I see that I am the only person actually listed as the maintainer at the moment, and I don't want to leave this in an unmaintained state. What does everyone think? Are we cool with Ryan as the new maintainer?
I am fine, depends on Ryan as far as I am concerned.
Thanks a lot, Brendan.
I am ok to be a maintainer.
Andi Shyti
maintainerHi Ryan,
Quoted 19 lines · Ryan Chen
Quoted 19 lines
Subject: Re: [RFC v1]
MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to RyanQuoted 7 lines · Brendan Higgins
Remove Brendan Higgins <[email protected]> from i2c-aspeed entry and replace with Ryan Chen <[email protected]>.
Signed-off-by Brendan Higgins <[email protected]>---
I am leaving Google and am going through and cleaning up my @google.comThanks for your work on this driver.
Quoted 5 lines
address in the relevant places. I was just going to remove myself from the ASPEED I2C DRIVER since I haven't been paying attention to it, but then I saw Ryan is adding a file for the I2C functions on 2600, which made my think: Should I replace myself with Ryan as the maintainer?
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
I see that I am the only person actually listed as the maintainer at the moment, and I don't want to leave this in an unmaintained state. What does everyone think? Are we cool with Ryan as the new maintainer?
I am fine, depends on Ryan as far as I am concerned.
Thanks a lot, Brendan.
I am ok to be a maintainer.
can I take this as an a-b by you?
Andi
Quoted 30 lines
Subject: Re: [RFC v1]
MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to RyanHi Ryan,
Quoted 5 lines · Ryan Chen
Quoted 5 lines
Subject: Re: [RFC v1]
MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to RyanQuoted 1 line · Brendan Higgins
Remove Brendan Higgins <[email protected]> from
i2c-aspeed
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
entry and replace with Ryan Chen <[email protected]>.
Signed-off-by Brendan Higgins <[email protected]>---
I am leaving Google and am going through and cleaning up my @google.comQuoted 6 lines
Quoted 6 lines
Thanks for your work on this driver.
Quoted 4 lines
address in the relevant places. I was just going to remove myself from the ASPEED I2C DRIVER since I haven't been paying attention to it, but then I saw Ryan is adding a file for the I2C functions on 2600, which made my think: Should I replace myself with Ryan as the
maintainer?
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
I see that I am the only person actually listed as the maintainer at the moment, and I don't want to leave this in an unmaintained state. What does everyone think? Are we cool with Ryan as the new
Quoted 8 lines
maintainer?
Quoted 4 lines
Quoted 2 lines
I am fine, depends on Ryan as far as I am concerned.
Thanks a lot, Brendan.
I am ok to be a maintainer.can I take this as an a-b by you?
Sorry, I don't know your "a-b" means.
If to be maintainer, Sure, I am willing to be.
Quoted 1 line
Andi
Andi Shyti
maintainerHi Ryan,
...
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
I see that I am the only person actually listed as the maintainer at the moment, and I don't want to leave this in an unmaintained state. What does everyone think? Are we cool with Ryan as the new
maintainer?
Quoted 1 line
Quoted 1 line
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
I am fine, depends on Ryan as far as I am concerned.
Thanks a lot, Brendan.
I am ok to be a maintainer.can I take this as an a-b by you?
Sorry, I don't know your "a-b" means.
If to be maintainer, Sure, I am willing to be.
a-b is short for "Acked-by:". I assume you have acked this patch :-)
So, thanks Ryan for taking this driver on you, I hope you'll enjoy. I took this patch into i2c/i2c-host-fixes.
Andi
P.S.
Sometimes you will see r-b which stands for "Reviewed-by". Sometimes SoB or Sob or s-b for "Signed-off-by".
It's just a way to overcomplicate something that is easy :-)