block: propagate partition scanning errors to the BLKRRPART ioctl
PATCH v2 1/1 block: propagate partition scanning errors to the BLKRRPART ioctl
Commit 4601b4b130de ("block: reopen the device in blkdev_reread_part") lost the propagation of I/O errors from the low-level read of the partition table to the user space caller of the BLKRRPART.
Apparently some user space relies on, so restore the propagation. This isn't exactly pretty as other block device open calls explicitly do not are about these errors, so add a new BLK_OPEN_STRICT_SCAN to opt into the error propagation.
---
Changes since v1:
- fix the rebase error that causes the flag to reuse a bit number
- fixed a comment typo
block/bdev.c | 29 +++++++++++++++++++---------- block/ioctl.c | 3 ++- include/linux/blkdev.h | 2 ++ 3 files changed, 23 insertions(+), 11 deletions(-)
block/bdev.c +19 -10
@@ -652,6 +652,14 @@ static void blkdev_flush_mapping(struct block_device *bdev)bdev_write_inode (bdev); } +static void blkdev_put_whole (struct block_device *bdev) +{ +if (atomic_dec_and_test (&bdev->bd_openers)) +blkdev_flush_mapping (bdev); +if (bdev->bd_disk->fops->release) + bdev->bd_disk->fops->release (bdev->bd_disk); +} +static int blkdev_get_whole (struct block_device *bdev,blk_mode_t mode) {struct gendisk *disk = bdev->bd_disk;
@@ -670,20 +678,21 @@ static int blkdev_get_whole(struct block_device *bdev, blk_mode_t mode)if (!atomic_read (&bdev->bd_openers))set_init_blocksize (bdev); -if (test_bit (GD_NEED_PART_SCAN , &disk->state)) -bdev_disk_changed (disk, false);atomic_inc (&bdev->bd_openers); +if (test_bit (GD_NEED_PART_SCAN , &disk->state)) { +/* +* Only return scanning errors if we are called from contexts +* that explicitly want them, e.g. the BLKRRPART ioctl. +*/ + ret =bdev_disk_changed (disk, false); +if (ret && (mode &BLK_OPEN_STRICT_SCAN )) { +blkdev_put_whole (bdev); +return ret; + } + }return 0 ; } -static void blkdev_put_whole (struct block_device *bdev) -{ -if (atomic_dec_and_test (&bdev->bd_openers)) -blkdev_flush_mapping (bdev); -if (bdev->bd_disk->fops->release) - bdev->bd_disk->fops->release (bdev->bd_disk); -} -static int blkdev_get_part (struct block_device *part,blk_mode_t mode) {struct gendisk *disk = part->bd_disk;
block/ioctl.c +2 -1
@@ -562,7 +562,8 @@ static int blkdev_common_ioctl(struct block_device *bdev, blk_mode_t mode,return -EACCES ;if (bdev_is_partition (bdev))return -EINVAL ; -return disk_scan_partitions (bdev->bd_disk, mode); +return disk_scan_partitions (bdev->bd_disk, + mode |BLK_OPEN_STRICT_SCAN );case BLKTRACESTART :case BLKTRACESTOP :case BLKTRACETEARDOWN :
include/linux/blkdev.h +2 -0
@@ -128,6 +128,8 @@ typedef unsigned int __bitwise blk_mode_t;#define BLK_OPEN_WRITE_IOCTL ((__force blk_mode_t)(1 << 4))/* open is exclusive wrt all other BLK_OPEN_WRITE opens to the device */ #define BLK_OPEN_RESTRICT_WRITES ((__force blk_mode_t)(1 << 5)) +/* return partition scanning errors */ +#define BLK_OPEN_STRICT_SCAN ((__force blk_mode_t)(1 << 6))struct gendisk {/*
Signature · 1 line
2.39.2
Quoted 9 lines · Christoph Hellwig
Commit
4601b4b130de("block: reopen the device inblkdev_reread_part") lost the propagation of I/O errors from the low-level read of the partition table to the user space caller of the BLKRRPART.Apparently some user space relies on, so restore the propagation. This isn't exactly pretty as other block device open calls explicitly do not are about these errors, so add a new
BLK_OPEN_STRICT_SCANto opt into the error propagation.
Quoted 8 lines
Fixes 4601b4b130de ("block: reopen the device in blkdev_reread_part")Reported-by Saranya Muruganandam <[email protected]>Signed-off-by Christoph Hellwig <[email protected]>---
Changes since v1:
- fix the rebase error that causes the flag to reuse a bit number
- fixed a comment typo
Thanks. The v2 patch looks good to me. I also confirmed that the corresponding blktests test case block/036 passes with this patch.
Chaitanya Kulkarni
Reviewed-byQuoted 15 lines · Shinichiro Kawasaki
Quoted 14 lines · Christoph Hellwig
Commit
4601b4b130de("block: reopen the device inblkdev_reread_part") lost the propagation of I/O errors from the low-level read of the partition table to the user space caller of the BLKRRPART.Apparently some user space relies on, so restore the propagation. This isn't exactly pretty as other block device open calls explicitly do not are about these errors, so add a new
BLK_OPEN_STRICT_SCANto opt into the error propagation.Fixes 4601b4b130de ("block: reopen the device in blkdev_reread_part")Reported-by Saranya Muruganandam <[email protected]>Signed-off-by Christoph Hellwig <[email protected]>---
Quoted 8 lines
Quoted 3 lines
Changes since v1:
- fix the rebase error that causes the flag to reuse a bit number
- fixed a comment typoThanks. The v2 patch looks good to me. I also confirmed that the corresponding blktests test case block/036 passes with this patch.
Reviewed-by Shin'ichiro Kawasaki <[email protected]>Tested-by Shin'ichiro Kawasaki <[email protected]>
seems like my reviewed-by tag from V1 is missing ...
here you go again
-ck
Quoted 10 lines · Christoph Hellwig
Commit
4601b4b130de("block: reopen the device inblkdev_reread_part") lost the propagation of I/O errors from the low-level read of the partition table to the user space caller of the BLKRRPART.Apparently some user space relies on, so restore the propagation. This isn't exactly pretty as other block device open calls explicitly do not are about these errors, so add a new
BLK_OPEN_STRICT_SCANto opt into the error propagation.[...]
Applied, thanks!
[1/1] block: propagate partition scanning errors to the BLKRRPART ioctl
commit: 752863bddacab6b5c5164b1df8c8b2e3a175ee28
Best regards,
Signature · 1 line
Jens Axboe