ARM: dts: stm32: Set {bitclock, frame}-master phandles on ST DKx
Subsystems (2)
PATCH 1/1 ARM: dts: stm32: Set {bitclock, frame}-master phandles on ST DKx
Fix the following dtbs_check warning:
cs42l51@4a: port:endpoint@0:frame-master: True is not of type 'array' cs42l51@4a: port:endpoint@0:bitclock-master: True is not of type 'array'
--- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +4 -4
@@ -220,15 +220,15 @@ cs42l51_port: port { cs42l51_tx_endpoint: endpoint@0 { reg = <0>; remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; + frame-master = <&cs42l51_tx_endpoint>; + bitclock-master = <&cs42l51_tx_endpoint>; }; cs42l51_rx_endpoint: endpoint@1 { reg = <1>; remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; + frame-master = <&cs42l51_rx_endpoint>; + bitclock-master = <&cs42l51_rx_endpoint>; }; }; };
Signature · 7 lines
2.30.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Alexandre TORGUE
maintainerHi Marek
Quoted 29 lines · Marek Vasut
Fix the following
dtbs_checkwarning:
cs42l51@4a: port:endpoint@0:frame-master: True is not of type 'array' cs42l51@4a: port:endpoint@0:bitclock-master: True is not of type 'array'Signed-off-by Marek Vasut <[email protected]>Cc Alexandre Torgue <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>--- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +2
-2@@ -220,15 +220,15 @@ cs42l51_port: port { cs42l51_tx_endpoint: endpoint@0 { reg = <0>; remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; + frame-master = <&cs42l51_tx_endpoint>; + bitclock-master = <&cs42l51_tx_endpoint>; };
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi cs42l51_port: port { · line 234
Quoted 10 lines
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +2
-2cs42l51_rx_endpoint: endpoint@1 { reg = <1>; remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; + frame-master = <&cs42l51_rx_endpoint>; + bitclock-master = <&cs42l51_rx_endpoint>; }; }; };
Applied on stm32-next. Thanks to update the DKx board. Note that "cirrus,cs42l51.yaml" has to be also updated. Did you also sent yaml update aside this patch ?
cheers
Alex
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 1 line · Alexandre TORGUE
Hi Marek
Hi,
[...]
Quoted 18 lines
Quoted 18 lines
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +2
-4@@ -220,15 +220,15 @@ cs42l51_port: port { cs42l51_tx_endpoint: endpoint@0 { reg = <0>; remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; + frame-master = <&cs42l51_tx_endpoint>; + bitclock-master = <&cs42l51_tx_endpoint>; }; cs42l51_rx_endpoint: endpoint@1 { reg = <1>; remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master;
Quoted 8 lines
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi cs42l51_port: port {
Quoted 6 lines
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +2
-0+ frame-master = <&cs42l51_rx_endpoint>; + bitclock-master = <&cs42l51_rx_endpoint>; }; }; };Applied on stm32-next. Thanks to update the DKx board. Note that "cirrus,cs42l51.yaml" has to be also updated. Did you also sent yaml update aside this patch ?
Nope, sorry.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Alexandre TORGUE
maintainerQuoted 34 lines · Marek Vasut
Quoted 1 line · Alexandre TORGUE
Hi Marek
Hi,
[...]
Quoted 18 lines
Quoted 18 lines
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +2
-4@@ -220,15 +220,15 @@ cs42l51_port: port { cs42l51_tx_endpoint: endpoint@0 { reg = <0>; remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; + frame-master = <&cs42l51_tx_endpoint>; + bitclock-master = <&cs42l51_tx_endpoint>; }; cs42l51_rx_endpoint: endpoint@1 { reg = <1>; remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master;Quoted 8 lines
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi cs42l51_port: port {
Quoted 6 lines
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +2
-0+ frame-master = <&cs42l51_rx_endpoint>; + bitclock-master = <&cs42l51_rx_endpoint>; }; }; };Applied on stm32-next. Thanks to update the DKx board. Note that "cirrus,cs42l51.yaml" has to be also updated. Did you also sent yaml update aside this patch ?
Quoted 1 line
Nope, sorry.
No pb, we'll do.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 35 lines · Alexandre TORGUE
Quoted 34 lines · Marek Vasut
Quoted 1 line · Alexandre TORGUE
Hi Marek
Hi,
[...]
Quoted 26 lines
Quoted 14 lines
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +2
-2@@ -220,15 +220,15 @@ cs42l51_port: port { cs42l51_tx_endpoint: endpoint@0 { reg = <0>; remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; + frame-master = <&cs42l51_tx_endpoint>; + bitclock-master = <&cs42l51_tx_endpoint>; }; cs42l51_rx_endpoint: endpoint@1 {arch/arm/boot/dts/stm32mp15xx-dkx.dtsi cs42l51_port: port { · line 234
Quoted 10 lines
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +2
-2reg = <1>; remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; + frame-master = <&cs42l51_rx_endpoint>; + bitclock-master = <&cs42l51_rx_endpoint>; }; }; };Applied on stm32-next. Thanks to update the DKx board. Note that "cirrus,cs42l51.yaml" has to be also updated. Did you also sent yaml update aside this patch ?
Quoted 3 lines
Quoted 1 line
Nope, sorry.
No pb, we'll do.
Thank you
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel