Skip to contentSkip to conversation

Kconfig dependencies for ppc machines

PATCH In review Thomas Huth 3 participants 9 messages Jan 31, 2019 – Feb 2, 2019

lore
Share & tools
lore
#0 lore raw

v2 cover Kconfig dependencies for ppc machines

Here's now my stab at expressing the ppc machine dependencies with Kconfig. I've carefully stepped through the dependencies and tried to built each machine separately (which should be possible now, apart from some few quirks like the RTAS dependency in qtest.c which I will address later).

v2: Adressed review feedback from v1

Based-on: [email protected]

Thomas Huth (5):
ppc64: Express dependencies of 'pseries' and 'powernv' machines with
kconfig
ppc: Express dependencies of the 'prep' and '40p' machines with
kconfig
ppc: Express dependencies of the Mac machines with kconfig
ppc: Express dependencies of the Sam460EX machines with kconfig
ppc: Express dependencies of the embedded machines with kconfig

 default-configs/ppc-softmmu.mak   | 51 +++--------------------------------
 default-configs/ppc64-softmmu.mak |  8 ------
 hw/display/Kconfig                |  1 +
 hw/intc/Kconfig                   |  6 ++---
 hw/mem/Kconfig                    |  1 +
 hw/misc/Kconfig                   |  6 +++++
 hw/net/Kconfig                    |  2 ++
 hw/nvram/Kconfig                  |  2 ++
 hw/pci-host/Kconfig               |  4 ++-
 hw/ppc/Kconfig                    | 57 ++++++++++++++++++++++++++++++++++++---
 hw/usb/Kconfig                    |  2 +-
 11 files changed, 75 insertions(+), 65 deletions(-)
Signature · 1 line
1.8.3.1
#1 lore raw

PATCH v2 1/5 ppc64: Express dependencies of 'pseries' and 'powernv' machines with kconfig

The POWERNV switch should always select ISA_IPMI_BT, then the other IPMI options are turned on automatically now.
CONFIG_DIMM should always be selected by the pseries machine, which in turn depends on CONFIG_MEM_DEVICE since DIMM implements this interface.
CONFIG_VIRTIO_VGA can be dropped from default-configs/ppc64-softmmu.mak completely since this device is already automatically enabled via hw/display/Kconfig now.

---
 default-configs/ppc64-softmmu.mak |  8 --------
 hw/intc/Kconfig                   |  6 ++----
 hw/mem/Kconfig                    |  1 +
 hw/ppc/Kconfig                    | 18 ++++++++++++++----
 4 files changed, 17 insertions(+), 16 deletions(-)
default-configs/ppc64-softmmu.mak +0 -8
index a0a9151..cca5266 100644
@@ -5,14 +5,6 @@ include ppc-softmmu.mak
 
 # For PowerNV
 CONFIG_POWERNV=y
-CONFIG_IPMI=y
-CONFIG_IPMI_LOCAL=y
-CONFIG_IPMI_EXTERN=y
-CONFIG_ISA_IPMI_BT=y
 
 # For pSeries
 CONFIG_PSERIES=y
-CONFIG_VIRTIO_VGA=y
-CONFIG_MEM_DEVICE=y
-CONFIG_DIMM=y
-CONFIG_SPAPR_RNG=y
hw/intc/Kconfig +2 -4
index 6eea14e..de10a6b 100644
@@ -31,13 +31,11 @@ config OPENPIC_KVM
 
 config XICS
     bool
-    default y
-    depends on PSERIES
+    depends on POWERNV || PSERIES
 
 config XICS_SPAPR
     bool
-    default y
-    depends on PSERIES
+    select XICS
 
 config XICS_KVM
     bool
hw/mem/Kconfig +1 -0
index d1e635c..620fd4c 100644
@@ -1,5 +1,6 @@
 config DIMM
     bool
+    select MEM_DEVICE
 
 config MEM_DEVICE
     bool
hw/ppc/Kconfig +14 -4
index b0095e1..4dbf866 100644
@@ -1,11 +1,23 @@
 config PSERIES
     bool
+    select DIMM
+    select PCI
+    select VFIO
+    select XICS_SPAPR
+    select XIVE_SPAPR
 
 config SPAPR_RNG
     bool
+    default y
+    depends on PSERIES
 
 config POWERNV
     bool
+    select ISA_IPMI_BT
+    select ISA_BUS
+    select MC146818RTC
+    select XICS
+    select XIVE
 
 config PPC405
     bool
@@ -45,16 +57,14 @@ config MAC_PMU
 
 config XIVE
     bool
-    default y
-    depends on PSERIES
+    depends on POWERNV || PSERIES
 
 config MACIO_GPIO
     bool
 
 config XIVE_SPAPR
     bool
-    default y
-    depends on PSERIES
+    select XIVE
 
 config CUDA
     bool
Signature · 1 line
1.8.3.1
#2 lore raw

Re: [Qemu-devel] [PATCH v2 1/5] ppc64: Express dependencies of 'pseries' and 'powernv' machines with kconfig

hw/ppc/Kconfig line 7

Quoted 7 lines · Thomas Huth

config PSERIES
bool

hw/ppc/Kconfig +5 -0
+    select DIMM
+    select PCI
+    select VFIO
+    select XICS_SPAPR
+    select XIVE_SPAPR

Missing "select SPAPR_VSCSI", added it locally.

hw/ppc/Kconfig line 20

Quoted 9 lines

config POWERNV
bool

hw/ppc/Kconfig +5 -0
+    select ISA_IPMI_BT
+    select ISA_BUS
+    select MC146818RTC
+    select XICS
+    select XIVE

Missing "select IPMI_LOCAL" for

/home/pbonzini/work/upstream/qemu/hw/ppc/pnv_bmc.c:67: undefined reference to `ipmi_bmc_gen_event'
hw/ppc/pnv_bmc.o: In function `pnv_dt_bmc_sensors':
/home/pbonzini/work/upstream/qemu/hw/ppc/pnv_bmc.c:95: undefined reference to `ipmi_bmc_sdr_find'

added it locally too.

Paolo

#3 lore raw

PATCH v2 2/5 ppc: Express dependencies of the 'prep' and '40p' machines with kconfig

In reply to Thomas Huth

Select the required devices in hw/ppc/Kconfig instead, so that ppc-softmmu.mak only contains the user-selectable PREP switch. Plug-in devices like NE2000_ISA are pulled in automatically by the Kconfig build system now.

Cc Hervé Poussineau <[email protected]>
---
 default-configs/ppc-softmmu.mak | 8 --------
 hw/ppc/Kconfig                  | 8 ++++++++
 2 files changed, 8 insertions(+), 8 deletions(-)
default-configs/ppc-softmmu.mak +0 -8
index 05ba726..422f1b7 100644
@@ -57,11 +57,3 @@ CONFIG_MAC_NEWWORLD=y
 
 # For PReP
 CONFIG_PREP=y
-CONFIG_PREP_PCI=y
-CONFIG_RS6000_MC=y
-CONFIG_I82374=y
-CONFIG_I82378=y
-CONFIG_PCKBD=y
-CONFIG_NE2000_ISA=y
-CONFIG_PC87312=y
-CONFIG_CS4231A=y
hw/ppc/Kconfig +8 -0
index 4dbf866..b1c3a30 100644
@@ -33,6 +33,14 @@ config SAM460EX
 
 config PREP
     bool
+    select CS4231A
+    select PREP_PCI
+    select I82374
+    select I82378
+    select LSI_SCSI_PCI
+    select M48T59
+    select PC87312
+    select RS6000_MC
 
 config RS6000_MC
     bool
Signature · 1 line
1.8.3.1
Reviewed-by on v2 2/5
#4 lore raw

Re: [Qemu-devel] [PATCH v2 2/5] ppc: Express dependencies of the 'prep' and '40p' machines with kconfig

Le 31/01/2019 à 14:53, Thomas Huth a écrit :

Quoted 5 lines

Select the required devices in hw/ppc/Kconfig instead, so that ppc-softmmu.mak only contains the user-selectable PREP switch. Plug-in devices like NE2000_ISA are pulled in automatically by the Kconfig build system now.

Quoted 7 lines
Cc Hervé Poussineau <[email protected]>
---
  default-configs/ppc-softmmu.mak | 8 --------
  hw/ppc/Kconfig                  | 8 ++++++++
  2 files changed, 8 insertions(+), 8 deletions(-)
#5 lore raw

PATCH v2 3/5 ppc: Express dependencies of the Mac machines with kconfig

In reply to Thomas Huth

This will make it for example easier if the users want to disable one of the two machines for their builds.

---
 default-configs/ppc-softmmu.mak | 15 ---------------
 hw/misc/Kconfig                 |  6 ++++++
 hw/net/Kconfig                  |  2 ++
 hw/pci-host/Kconfig             |  4 +++-
 hw/ppc/Kconfig                  |  9 +++++++++
 5 files changed, 20 insertions(+), 16 deletions(-)
default-configs/ppc-softmmu.mak +0 -15
index 422f1b7..513a8e9 100644
@@ -37,21 +37,6 @@ CONFIG_VGA_CIRRUS=y
 CONFIG_SMBUS_EEPROM=y
 
 # For Macs
-CONFIG_ESCC=y
-CONFIG_MACIO=y
-CONFIG_MACIO_GPIO=y
-CONFIG_SUNGEM=y
-CONFIG_MOS6522=y
-CONFIG_CUDA=y
-CONFIG_ADB=y
-CONFIG_MAC_NVRAM=y
-CONFIG_MAC_DBDMA=y
-CONFIG_MAC_PMU=y
-CONFIG_HEATHROW_PIC=y
-CONFIG_GRACKLE_PCI=y
-CONFIG_UNIN_PCI=y
-CONFIG_DEC_PCI=y
-CONFIG_IDE_MACIO=y
 CONFIG_MAC_OLDWORLD=y
 CONFIG_MAC_NEWWORLD=y
 
hw/misc/Kconfig +6 -0
index 3ebe30f..9b63f75 100644
@@ -59,6 +59,12 @@ config MOS6522
 
 config MACIO
     bool
+    select CUDA
+    select ESCC
+    select IDE_MACIO
+    select MAC_DBDMA
+    select MAC_NVRAM
+    select MOS6522
 
 config IVSHMEM_DEVICE
     bool
hw/net/Kconfig +2 -0
index 47368d7..9047f6d 100644
@@ -85,6 +85,8 @@ config FTGMAC100
 
 config SUNGEM
     bool
+    default y if (MAC_OLDWORLD || MAC_NEWWORLD)
+    depends on PCI
 
 config COLDFIRE
     bool
hw/pci-host/Kconfig +3 -1
index ff4080c..b39ea29 100644
@@ -10,8 +10,10 @@ config GRACKLE_PCI
     bool
 
 config UNIN_PCI
-    select PCI
     bool
+    select PCI
+    select DEC_PCI
+    select OPENPIC
 
 config PPCE500_PCI
     select PCI
hw/ppc/Kconfig +9 -0
index b1c3a30..2956c86 100644
@@ -47,9 +47,18 @@ config RS6000_MC
 
 config MAC_OLDWORLD
     bool
+    select ADB
+    select GRACKLE_PCI
+    select HEATHROW_PIC
+    select MACIO
 
 config MAC_NEWWORLD
     bool
+    select ADB
+    select MACIO
+    select MACIO_GPIO
+    select MAC_PMU
+    select UNIN_PCI
 
 config E500
     bool
Signature · 1 line
1.8.3.1
#6 lore raw

PATCH v2 4/5 ppc: Express dependencies of the Sam460EX machines with kconfig

In reply to Thomas Huth

Most of the dependencies are now directly selected by the SAM460EX switch. We can drop CONFIG_VGA_CIRRUS since this device is already selected automatically when CONFIG_PCI_DEVICES is set.

---
 default-configs/ppc-softmmu.mak | 10 ----------
 hw/display/Kconfig              |  1 +
 hw/ppc/Kconfig                  | 10 ++++++++++
 hw/usb/Kconfig                  |  2 +-
 4 files changed, 12 insertions(+), 11 deletions(-)
default-configs/ppc-softmmu.mak +0 -10
index 513a8e9..5265d8a 100644
@@ -25,16 +25,6 @@ CONFIG_PCI_EXPRESS=y
 
 # For Sam460ex
 CONFIG_SAM460EX=y
-CONFIG_USB_EHCI_SYSBUS=y
-CONFIG_SM501=y
-CONFIG_DDC=y
-CONFIG_IDE_SII3112=y
-CONFIG_I2C=y
-CONFIG_AT24C=y
-CONFIG_BITBANG_I2C=y
-CONFIG_M41T80=y
-CONFIG_VGA_CIRRUS=y
-CONFIG_SMBUS_EEPROM=y
 
 # For Macs
 CONFIG_MAC_OLDWORLD=y
hw/display/Kconfig +1 -0
index c784fe8..f8e6136 100644
@@ -76,6 +76,7 @@ config MILKYMIST_TMU2
 config SM501
     bool
     depends on I2C
+    select DDC
 
 config TCX
     bool
hw/ppc/Kconfig +10 -0
index 2956c86..35e3704 100644
@@ -27,9 +27,19 @@ config PPC440
 
 config PPC4XX
     bool
+    select BITBANG_I2C
+    select PCI
 
 config SAM460EX
     bool
+    select PFLASH_CFI01
+    select IDE_SII3112
+    select M41T80
+    select PPC440
+    select SM501
+    select SMBUS_EEPROM
+    select USB_EHCI_SYSBUS
+    select USB_OHCI
 
 config PREP
     bool
hw/usb/Kconfig +1 -1
index a1b7acb..871ea47 100644
@@ -21,7 +21,7 @@ config USB_EHCI
 
 config USB_EHCI_SYSBUS
     bool
-    select USB
+    select USB_EHCI
 
 config USB_XHCI
     bool
Signature · 1 line
1.8.3.1
#7 lore raw

PATCH v2 5/5 ppc: Express dependencies of the embedded machines with kconfig

In reply to Thomas Huth

This makes it much easier if the users want to disable some of the embedded machines for their builds.

---
 default-configs/ppc-softmmu.mak | 18 ++++--------------
 hw/nvram/Kconfig                |  2 ++
 hw/ppc/Kconfig                  | 12 ++++++++++++
 3 files changed, 18 insertions(+), 14 deletions(-)
default-configs/ppc-softmmu.mak +4 -14
index 5265d8a..5192aca 100644
@@ -1,27 +1,17 @@
 # Default configuration for ppc-softmmu
 
-CONFIG_PCI=y
 CONFIG_PCI_DEVICES=y
-CONFIG_ISA_BUS=y
 CONFIG_TEST_DEVICES=y
 
-# For embedded PPCs:
-CONFIG_PPC4XX=y
-CONFIG_M48T59=y
+# FIXME: CONFIG_SERIAL is currently still required to link all of the
+# ppc machines (due to the usage of serial_mm_init() in ppc405_uc.c).
 CONFIG_SERIAL=y
-CONFIG_OPENPIC=y
-CONFIG_PPCE500_PCI=y
-CONFIG_PFLASH_CFI01=y
-CONFIG_PFLASH_CFI02=y
-CONFIG_XILINX=y
-CONFIG_XILINX_ETHLITE=y
+
+# For embedded PPCs:
 CONFIG_E500=y
-CONFIG_PLATFORM_BUS=y
-CONFIG_ETSEC=y
 CONFIG_PPC405=y
 CONFIG_PPC440=y
 CONFIG_VIRTEX=y
-CONFIG_PCI_EXPRESS=y
 
 # For Sam460ex
 CONFIG_SAM460EX=y
hw/nvram/Kconfig +2 -0
index 1f5ec95..4f44f9b 100644
@@ -3,6 +3,8 @@ config DS1225Y
 
 config AT24C
     bool
+    default y if E500
+    depends on I2C
 
 config MAC_NVRAM
     bool
hw/ppc/Kconfig +12 -0
index 35e3704..4085107 100644
@@ -21,9 +21,14 @@ config POWERNV
 
 config PPC405
     bool
+    select M48T59
+    select PFLASH_CFI02
+    select PPC4XX
 
 config PPC440
     bool
+    select PCI_EXPRESS
+    select PPC4XX
 
 config PPC4XX
     bool
@@ -72,9 +77,16 @@ config MAC_NEWWORLD
 
 config E500
     bool
+    select ETSEC
+    select OPENPIC
+    select PLATFORM_BUS
+    select PPCE500_PCI
 
 config VIRTEX
     bool
+    select PFLASH_CFI01
+    select XILINX
+    select XILINX_ETHLITE
 
 config MAC_DBDMA
     bool
Signature · 1 line
1.8.3.1
#8 lore raw
In reply to Thomas Huth
Quoted 19 lines · Thomas Huth

Here's now my stab at expressing the ppc machine dependencies with Kconfig. I've carefully stepped through the dependencies and tried to built each machine separately (which should be possible now, apart from some few quirks like the RTAS dependency in qtest.c which I will address later).

v2: Adressed review feedback from v1

Based-on: [email protected]

Thomas Huth (5):
ppc64: Express dependencies of 'pseries' and 'powernv' machines with
kconfig
ppc: Express dependencies of the 'prep' and '40p' machines with
kconfig
ppc: Express dependencies of the Mac machines with kconfig
ppc: Express dependencies of the Sam460EX machines with kconfig
ppc: Express dependencies of the embedded machines with kconfig

Quoted 13 lines
 default-configs/ppc-softmmu.mak   | 51 +++--------------------------------
 default-configs/ppc64-softmmu.mak |  8 ------
 hw/display/Kconfig                |  1 +
 hw/intc/Kconfig                   |  6 ++---
 hw/mem/Kconfig                    |  1 +
 hw/misc/Kconfig                   |  6 +++++
 hw/net/Kconfig                    |  2 ++
 hw/nvram/Kconfig                  |  2 ++
 hw/pci-host/Kconfig               |  4 ++-
 hw/ppc/Kconfig                    | 57 ++++++++++++++++++++++++++++++++++++---
 hw/usb/Kconfig                    |  2 +-
 11 files changed, 75 insertions(+), 65 deletions(-)

I queued this to my kconfig branch at https://github.com/bonzini/qemu.git.

Only ARM and MIPS are missing there. :)

Paolo